Skip to contentSkip to conversation

Enable Hantro G1 post-processor

PATCH Superseded Ezequiel Garcia 6 participants 18 messages Sep 3, 2019 – Sep 16, 2019

Subsystems (3)

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

cover Enable Hantro G1 post-processor

Hi all,

This series enables the post-processor support available on the Hantro G1 VPU. The post-processor block can be pipelined with the decoder hardware, allowing to perform operations such as color conversion, scaling, rotation, cropping, among others.

The decoder hardware needs its own set of NV12 buffers (the native decoder format), and the post-processor is the owner of the CAPTURE buffers. This allows the application get processed (scaled, converted, etc) buffers, completely transparently.

This feature is implemented by exposing other CAPTURE pixel formats to the application (ENUM_FMT). When the application sets a pixel format other than NV12, the driver will enable and use the post-processor transparently.

Patches 1 to 3 cleanup and organize the code to allow easier integration of the post-processor. Then patch 4 introduces the new pixel formats and enables the post-processor itself.

I am aware it's still early for v5.5, yet I'm posting this series to get feedback and allow others to tests. Also, keep in mind these patches are conflict with Jonas' recent series.

This is tested on RK3288 platforms with MPEG-2, VP8 and H264 streams, decoding to RGB and YUV-packed surfaces.

Thanks,
Ezequiel

Ezequiel Garcia (4):
media: hantro: Simplify macroblock macros
media: hantro: Simplify buffer helpers
media: hantro: Add helper for the H264 motion vectors allocation
media: hantro: Support color conversion via post-processing

 drivers/staging/media/hantro/Makefile         |   1 +
 drivers/staging/media/hantro/hantro.h         |  49 ++-
 drivers/staging/media/hantro/hantro_drv.c     |  27 +-
 .../staging/media/hantro/hantro_g1_h264_dec.c |   9 +-
 .../media/hantro/hantro_g1_mpeg2_dec.c        |  14 +-
 .../staging/media/hantro/hantro_g1_vp8_dec.c  |  13 +-
 .../staging/media/hantro/hantro_h1_jpeg_enc.c |   4 +-
 drivers/staging/media/hantro/hantro_h264.c    |  26 +-
 drivers/staging/media/hantro/hantro_hw.h      |  15 +-
 .../staging/media/hantro/hantro_postproc.c    | 316 ++++++++++++++++++
 drivers/staging/media/hantro/hantro_v4l2.c    |  25 +-
 drivers/staging/media/hantro/rk3288_vpu_hw.c  |  37 +-
 drivers/staging/media/hantro/rk3399_vpu_hw.c  |  12 +-
 .../media/hantro/rk3399_vpu_hw_jpeg_enc.c     |   4 +-
 .../media/hantro/rk3399_vpu_hw_mpeg2_dec.c    |  11 +-
 .../media/hantro/rk3399_vpu_hw_vp8_dec.c      |  12 +-
 16 files changed, 483 insertions(+), 92 deletions(-)
 create mode 100644 drivers/staging/media/hantro/hantro_postproc.c
Signature · 1 line
2.22.0
#1 lore raw

PATCH 1/4 media: hantro: Simplify macroblock macros

It seems all codecs are using a 16x16 size macroblock, and so it's possible to have just one set of macroblock macros.

---
 drivers/staging/media/hantro/hantro.h          | 18 +++---------------
 .../staging/media/hantro/hantro_g1_h264_dec.c  |  2 +-
 .../staging/media/hantro/hantro_g1_mpeg2_dec.c |  4 ++--
 .../staging/media/hantro/hantro_g1_vp8_dec.c   |  4 ++--
 .../staging/media/hantro/hantro_h1_jpeg_enc.c  |  4 ++--
 drivers/staging/media/hantro/rk3288_vpu_hw.c   | 16 ++++++++--------
 drivers/staging/media/hantro/rk3399_vpu_hw.c   | 12 ++++++------
 .../media/hantro/rk3399_vpu_hw_jpeg_enc.c      |  4 ++--
 .../media/hantro/rk3399_vpu_hw_mpeg2_dec.c     |  4 ++--
 .../media/hantro/rk3399_vpu_hw_vp8_dec.c       |  4 ++--
 10 files changed, 30 insertions(+), 42 deletions(-)
drivers/staging/media/hantro/hantro.h +3 -15
index f670bbde4159..c151133b8c86 100644
@@ -26,21 +26,9 @@
 
 #include "hantro_hw.h"
 
-#define VP8_MB_DIM			16
-#define VP8_MB_WIDTH(w)			DIV_ROUND_UP(w, VP8_MB_DIM)
-#define VP8_MB_HEIGHT(h)		DIV_ROUND_UP(h, VP8_MB_DIM)
-
-#define H264_MB_DIM			16
-#define H264_MB_WIDTH(w)		DIV_ROUND_UP(w, H264_MB_DIM)
-#define H264_MB_HEIGHT(h)		DIV_ROUND_UP(h, H264_MB_DIM)
-
-#define MPEG2_MB_DIM			16
-#define MPEG2_MB_WIDTH(w)		DIV_ROUND_UP(w, MPEG2_MB_DIM)
-#define MPEG2_MB_HEIGHT(h)		DIV_ROUND_UP(h, MPEG2_MB_DIM)
-
-#define JPEG_MB_DIM			16
-#define JPEG_MB_WIDTH(w)		DIV_ROUND_UP(w, JPEG_MB_DIM)
-#define JPEG_MB_HEIGHT(h)		DIV_ROUND_UP(h, JPEG_MB_DIM)
+#define MB_DIM			16
+#define MB_WIDTH(w)		DIV_ROUND_UP(w, MB_DIM)
+#define MB_HEIGHT(h)		DIV_ROUND_UP(h, MB_DIM)
 
 struct hantro_ctx;
 struct hantro_codec_ops;
drivers/staging/media/hantro/hantro_g1_h264_dec.c +1 -1
index 7ab534936843..d42c4004fe35 100644
@@ -251,7 +251,7 @@ static void set_buffers(struct hantro_ctx *ctx)
 		size_t mv_offset = round_up(pic_size, 8);
 
 		if (ctrls->slices[0].flags & V4L2_H264_SLICE_FLAG_BOTTOM_FIELD)
-			mv_offset += 32 * H264_MB_WIDTH(ctx->dst_fmt.width);
+			mv_offset += 32 * MB_WIDTH(ctx->dst_fmt.width);
 
 		vdpu_write_relaxed(vpu, dst_dma + mv_offset,
 				   G1_REG_ADDR_DIR_MV);
drivers/staging/media/hantro/hantro_g1_mpeg2_dec.c +2 -2
index 80f0e94f8afa..314a72208812 100644
@@ -207,8 +207,8 @@ void hantro_g1_mpeg2_dec_run(struct hantro_ctx *ctx)
 	      G1_REG_DEC_AXI_WR_ID(0);
 	vdpu_write_relaxed(vpu, reg, G1_SWREG(3));
 
-	reg = G1_REG_PIC_MB_WIDTH(MPEG2_MB_WIDTH(ctx->dst_fmt.width)) |
-	      G1_REG_PIC_MB_HEIGHT_P(MPEG2_MB_HEIGHT(ctx->dst_fmt.height)) |
+	reg = G1_REG_PIC_MB_WIDTH(MB_WIDTH(ctx->dst_fmt.width)) |
+	      G1_REG_PIC_MB_HEIGHT_P(MB_HEIGHT(ctx->dst_fmt.height)) |
 	      G1_REG_ALT_SCAN_E(picture->alternate_scan) |
 	      G1_REG_TOPFIELDFIRST_E(picture->top_field_first);
 	vdpu_write_relaxed(vpu, reg, G1_SWREG(4));
drivers/staging/media/hantro/hantro_g1_vp8_dec.c +2 -2
index 6d99c2be01cf..e9d3361ed385 100644
@@ -470,8 +470,8 @@ void hantro_g1_vp8_dec_run(struct hantro_ctx *ctx)
 	vdpu_write_relaxed(vpu, reg, G1_REG_DEC_CTRL0);
 
 	/* Frame dimensions */
-	mb_width = VP8_MB_WIDTH(width);
-	mb_height = VP8_MB_HEIGHT(height);
+	mb_width = MB_WIDTH(width);
+	mb_height = MB_HEIGHT(height);
 	reg = G1_REG_DEC_CTRL1_PIC_MB_WIDTH(mb_width) |
 	      G1_REG_DEC_CTRL1_PIC_MB_HEIGHT_P(mb_height) |
 	      G1_REG_DEC_CTRL1_PIC_MB_W_EXT(mb_width >> 9) |
drivers/staging/media/hantro/hantro_h1_jpeg_enc.c +2 -2
index ecd34a7db190..938b48d4d3d9 100644
@@ -116,8 +116,8 @@ void hantro_h1_jpeg_enc_run(struct hantro_ctx *ctx)
 	/* Make sure that all registers are written at this point. */
 	vepu_write(vpu, reg, H1_REG_AXI_CTRL);
 
-	reg = H1_REG_ENC_CTRL_WIDTH(JPEG_MB_WIDTH(ctx->src_fmt.width))
-		| H1_REG_ENC_CTRL_HEIGHT(JPEG_MB_HEIGHT(ctx->src_fmt.height))
+	reg = H1_REG_ENC_CTRL_WIDTH(MB_WIDTH(ctx->src_fmt.width))
+		| H1_REG_ENC_CTRL_HEIGHT(MB_HEIGHT(ctx->src_fmt.height))
 		| H1_REG_ENC_CTRL_ENC_MODE_JPEG
 		| H1_REG_ENC_PIC_INTRA
 		| H1_REG_ENC_CTRL_EN_BIT;
drivers/staging/media/hantro/rk3288_vpu_hw.c +8 -8
index 6bfcc47d1e58..c0bdd6c02520 100644
@@ -48,10 +48,10 @@ static const struct hantro_fmt rk3288_vpu_enc_fmts[] = {
 		.frmsize = {
 			.min_width = 96,
 			.max_width = 8192,
-			.step_width = JPEG_MB_DIM,
+			.step_width = MB_DIM,
 			.min_height = 32,
 			.max_height = 8192,
-			.step_height = JPEG_MB_DIM,
+			.step_height = MB_DIM,
 		},
 	},
 };
@@ -68,10 +68,10 @@ static const struct hantro_fmt rk3288_vpu_dec_fmts[] = {
 		.frmsize = {
 			.min_width = 48,
 			.max_width = 3840,
-			.step_width = H264_MB_DIM,
+			.step_width = MB_DIM,
 			.min_height = 48,
 			.max_height = 2160,
-			.step_height = H264_MB_DIM,
+			.step_height = MB_DIM,
 		},
 	},
 	{
@@ -81,10 +81,10 @@ static const struct hantro_fmt rk3288_vpu_dec_fmts[] = {
 		.frmsize = {
 			.min_width = 48,
 			.max_width = 1920,
-			.step_width = MPEG2_MB_DIM,
+			.step_width = MB_DIM,
 			.min_height = 48,
 			.max_height = 1088,
-			.step_height = MPEG2_MB_DIM,
+			.step_height = MB_DIM,
 		},
 	},
 	{
@@ -94,10 +94,10 @@ static const struct hantro_fmt rk3288_vpu_dec_fmts[] = {
 		.frmsize = {
 			.min_width = 48,
 			.max_width = 3840,
-			.step_width = VP8_MB_DIM,
+			.step_width = MB_DIM,
 			.min_height = 48,
 			.max_height = 2160,
-			.step_height = VP8_MB_DIM,
+			.step_height = MB_DIM,
 		},
 	},
 };
drivers/staging/media/hantro/rk3399_vpu_hw.c +6 -6
index 14d14bc6b12b..9ac1f2cb6a16 100644
@@ -47,10 +47,10 @@ static const struct hantro_fmt rk3399_vpu_enc_fmts[] = {
 		.frmsize = {
 			.min_width = 96,
 			.max_width = 8192,
-			.step_width = JPEG_MB_DIM,
+			.step_width = MB_DIM,
 			.min_height = 32,
 			.max_height = 8192,
-			.step_height = JPEG_MB_DIM,
+			.step_height = MB_DIM,
 		},
 	},
 };
@@ -67,10 +67,10 @@ static const struct hantro_fmt rk3399_vpu_dec_fmts[] = {
 		.frmsize = {
 			.min_width = 48,
 			.max_width = 1920,
-			.step_width = MPEG2_MB_DIM,
+			.step_width = MB_DIM,
 			.min_height = 48,
 			.max_height = 1088,
-			.step_height = MPEG2_MB_DIM,
+			.step_height = MB_DIM,
 		},
 	},
 	{
@@ -80,10 +80,10 @@ static const struct hantro_fmt rk3399_vpu_dec_fmts[] = {
 		.frmsize = {
 			.min_width = 48,
 			.max_width = 3840,
-			.step_width = VP8_MB_DIM,
+			.step_width = MB_DIM,
 			.min_height = 48,
 			.max_height = 2160,
-			.step_height = VP8_MB_DIM,
+			.step_height = MB_DIM,
 		},
 	},
 };
drivers/staging/media/hantro/rk3399_vpu_hw_jpeg_enc.c +2 -2
index 06162f569b5e..067892345b5d 100644
@@ -149,8 +149,8 @@ void rk3399_vpu_jpeg_enc_run(struct hantro_ctx *ctx)
 	reg = VEPU_REG_AXI_CTRL_BURST_LEN(16);
 	vepu_write_relaxed(vpu, reg, VEPU_REG_AXI_CTRL);
 
-	reg = VEPU_REG_MB_WIDTH(JPEG_MB_WIDTH(ctx->src_fmt.width))
-		| VEPU_REG_MB_HEIGHT(JPEG_MB_HEIGHT(ctx->src_fmt.height))
+	reg = VEPU_REG_MB_WIDTH(MB_WIDTH(ctx->src_fmt.width))
+		| VEPU_REG_MB_HEIGHT(MB_HEIGHT(ctx->src_fmt.height))
 		| VEPU_REG_FRAME_TYPE_INTRA
 		| VEPU_REG_ENCODE_FORMAT_JPEG
 		| VEPU_REG_ENCODE_ENABLE;
drivers/staging/media/hantro/rk3399_vpu_hw_mpeg2_dec.c +2 -2
index e7ba5c0441cc..263ec81f209b 100644
@@ -223,8 +223,8 @@ void rk3399_vpu_mpeg2_dec_run(struct hantro_ctx *ctx)
 	      VDPU_REG_DEC_CLK_GATE_E(1);
 	vdpu_write_relaxed(vpu, reg, VDPU_SWREG(57));
 
-	reg = VDPU_REG_PIC_MB_WIDTH(MPEG2_MB_WIDTH(ctx->dst_fmt.width)) |
-	      VDPU_REG_PIC_MB_HEIGHT_P(MPEG2_MB_HEIGHT(ctx->dst_fmt.height)) |
+	reg = VDPU_REG_PIC_MB_WIDTH(MB_WIDTH(ctx->dst_fmt.width)) |
+	      VDPU_REG_PIC_MB_HEIGHT_P(MB_HEIGHT(ctx->dst_fmt.height)) |
 	      VDPU_REG_ALT_SCAN_E(picture->alternate_scan) |
 	      VDPU_REG_TOPFIELDFIRST_E(picture->top_field_first);
 	vdpu_write_relaxed(vpu, reg, VDPU_SWREG(120));
drivers/staging/media/hantro/rk3399_vpu_hw_vp8_dec.c +2 -2
index f17e32620b08..7d32a0283d93 100644
@@ -563,8 +563,8 @@ void rk3399_vpu_vp8_dec_run(struct hantro_ctx *ctx)
 		hantro_reg_write(vpu, &vp8_dec_filter_disable, 1);
 
 	/* Frame dimensions */
-	mb_width = VP8_MB_WIDTH(width);
-	mb_height = VP8_MB_HEIGHT(height);
+	mb_width = MB_WIDTH(width);
+	mb_height = MB_HEIGHT(height);
 
 	hantro_reg_write(vpu, &vp8_dec_mb_width, mb_width);
 	hantro_reg_write(vpu, &vp8_dec_mb_height, mb_height);
Signature · 1 line
2.22.0
#3 lore raw

PATCH 2/4 media: hantro: Simplify buffer helpers

In reply to Ezequiel Garcia

Modify hantro_get_ref() and hantro_h264_get_ref_buf() helpers to return the buffer DMA address, this makes the code simpler and at the same time will allow easier enablement of the post-processing feature.

---
 drivers/staging/media/hantro/hantro.h         |  2 +-
 drivers/staging/media/hantro/hantro_drv.c     |  3 ++-
 .../staging/media/hantro/hantro_g1_h264_dec.c |  5 ++---
 .../media/hantro/hantro_g1_mpeg2_dec.c        |  7 ++-----
 .../staging/media/hantro/hantro_g1_vp8_dec.c  |  7 +++----
 drivers/staging/media/hantro/hantro_h264.c    | 19 ++++++++-----------
 drivers/staging/media/hantro/hantro_hw.h      |  4 ++--
 .../media/hantro/rk3399_vpu_hw_mpeg2_dec.c    |  7 ++-----
 .../media/hantro/rk3399_vpu_hw_vp8_dec.c      |  8 +++-----
 9 files changed, 25 insertions(+), 37 deletions(-)
drivers/staging/media/hantro/hantro.h +1 -1
index c151133b8c86..deb90ae37859 100644
@@ -367,7 +367,7 @@ static inline void hantro_reg_write(struct hantro_dev *vpu,
 bool hantro_is_encoder_ctx(const struct hantro_ctx *ctx);
 
 void *hantro_get_ctrl(struct hantro_ctx *ctx, u32 id);
-dma_addr_t hantro_get_ref(struct vb2_queue *q, u64 ts);
+dma_addr_t hantro_get_ref(struct hantro_ctx *ctx, u64 ts);
 
 static inline struct vb2_v4l2_buffer *
 hantro_get_src_buf(struct hantro_ctx *ctx)
drivers/staging/media/hantro/hantro_drv.c +2 -1
index d8b6816b643b..f550b68d46ca 100644
@@ -43,8 +43,9 @@ void *hantro_get_ctrl(struct hantro_ctx *ctx, u32 id)
 	return ctrl ? ctrl->p_cur.p : NULL;
 }
 
-dma_addr_t hantro_get_ref(struct vb2_queue *q, u64 ts)
+dma_addr_t hantro_get_ref(struct hantro_ctx *ctx, u64 ts)
 {
+	struct vb2_queue *q = v4l2_m2m_get_dst_vq(ctx->fh.m2m_ctx);
 	struct vb2_buffer *buf;
 	int index;
 
drivers/staging/media/hantro/hantro_g1_h264_dec.c +2 -3
index d42c4004fe35..29130946dea4 100644
@@ -220,10 +220,9 @@ static void set_ref(struct hantro_ctx *ctx)
 
 	/* Set up addresses of DPB buffers. */
 	for (i = 0; i < HANTRO_H264_DPB_SIZE; i++) {
-		struct vb2_buffer *buf =  hantro_h264_get_ref_buf(ctx, i);
+		dma_addr_t dma_addr = hantro_h264_get_ref_buf(ctx, i);
 
-		vdpu_write_relaxed(vpu, vb2_dma_contig_plane_dma_addr(buf, 0),
-				   G1_REG_ADDR_REF(i));
+		vdpu_write_relaxed(vpu, dma_addr, G1_REG_ADDR_REF(i));
 	}
 }
 
drivers/staging/media/hantro/hantro_g1_mpeg2_dec.c +2 -5
index 314a72208812..f3bf67d8a289 100644
@@ -105,17 +105,14 @@ hantro_g1_mpeg2_dec_set_buffers(struct hantro_dev *vpu, struct hantro_ctx *ctx,
 {
 	dma_addr_t forward_addr = 0, backward_addr = 0;
 	dma_addr_t current_addr, addr;
-	struct vb2_queue *vq;
-
-	vq = v4l2_m2m_get_dst_vq(ctx->fh.m2m_ctx);
 
 	switch (picture->picture_coding_type) {
 	case V4L2_MPEG2_PICTURE_CODING_TYPE_B:
-		backward_addr = hantro_get_ref(vq,
+		backward_addr = hantro_get_ref(ctx,
 					       slice_params->backward_ref_ts);
 		/* fall-through */
 	case V4L2_MPEG2_PICTURE_CODING_TYPE_P:
-		forward_addr = hantro_get_ref(vq,
+		forward_addr = hantro_get_ref(ctx,
 					      slice_params->forward_ref_ts);
 	}
 
drivers/staging/media/hantro/hantro_g1_vp8_dec.c +3 -4
index e9d3361ed385..cad18094fee0 100644
@@ -370,19 +370,18 @@ static void cfg_tap(struct hantro_ctx *ctx,
 static void cfg_ref(struct hantro_ctx *ctx,
 		    const struct v4l2_ctrl_vp8_frame_header *hdr)
 {
-	struct vb2_queue *cap_q = &ctx->fh.m2m_ctx->cap_q_ctx.q;
 	struct hantro_dev *vpu = ctx->dev;
 	struct vb2_v4l2_buffer *vb2_dst;
 	dma_addr_t ref;
 
 	vb2_dst = hantro_get_dst_buf(ctx);
 
-	ref = hantro_get_ref(cap_q, hdr->last_frame_ts);
+	ref = hantro_get_ref(ctx, hdr->last_frame_ts);
 	if (!ref)
 		ref = vb2_dma_contig_plane_dma_addr(&vb2_dst->vb2_buf, 0);
 	vdpu_write_relaxed(vpu, ref, G1_REG_ADDR_REF(0));
 
-	ref = hantro_get_ref(cap_q, hdr->golden_frame_ts);
+	ref = hantro_get_ref(ctx, hdr->golden_frame_ts);
 	WARN_ON(!ref && hdr->golden_frame_ts);
 	if (!ref)
 		ref = vb2_dma_contig_plane_dma_addr(&vb2_dst->vb2_buf, 0);
@@ -390,7 +389,7 @@ static void cfg_ref(struct hantro_ctx *ctx,
 		ref |= G1_REG_ADDR_REF_TOPC_E;
 	vdpu_write_relaxed(vpu, ref, G1_REG_ADDR_REF(4));
 
-	ref = hantro_get_ref(cap_q, hdr->alt_frame_ts);
+	ref = hantro_get_ref(ctx, hdr->alt_frame_ts);
 	WARN_ON(!ref && hdr->alt_frame_ts);
 	if (!ref)
 		ref = vb2_dma_contig_plane_dma_addr(&vb2_dst->vb2_buf, 0);
drivers/staging/media/hantro/hantro_h264.c +8 -11
index 0d758e0c0f99..2227b4e12067 100644
@@ -537,22 +537,18 @@ static void update_dpb(struct hantro_ctx *ctx)
 	}
 }
 
-struct vb2_buffer *hantro_h264_get_ref_buf(struct hantro_ctx *ctx,
-					   unsigned int dpb_idx)
+dma_addr_t hantro_h264_get_ref_buf(struct hantro_ctx *ctx,
+				   unsigned int dpb_idx)
 {
-	struct vb2_queue *cap_q = &ctx->fh.m2m_ctx->cap_q_ctx.q;
 	struct v4l2_h264_dpb_entry *dpb = ctx->h264_dec.dpb;
-	struct vb2_buffer *buf;
-	int buf_idx = -1;
+	dma_addr_t dma_addr = 0;
 
 	if (dpb[dpb_idx].flags & V4L2_H264_DPB_ENTRY_FLAG_ACTIVE)
-		buf_idx = vb2_find_timestamp(cap_q,
-					     dpb[dpb_idx].reference_ts, 0);
+		dma_addr = hantro_get_ref(ctx, dpb[dpb_idx].reference_ts);
 
-	if (buf_idx >= 0) {
-		buf = vb2_get_buffer(cap_q, buf_idx);
-	} else {
+	if (!dma_addr) {
 		struct vb2_v4l2_buffer *dst_buf;
+		struct vb2_buffer *buf;
 
 		/*
 		 * If a DPB entry is unused or invalid, address of current
@@ -560,9 +556,10 @@ struct vb2_buffer *hantro_h264_get_ref_buf(struct hantro_ctx *ctx,
 		 */
 		dst_buf = hantro_get_dst_buf(ctx);
 		buf = &dst_buf->vb2_buf;
+		dma_addr = vb2_dma_contig_plane_dma_addr(buf, 0);
 	}
 
-	return buf;
+	return dma_addr;
 }
 
 int hantro_h264_dec_prepare_run(struct hantro_ctx *ctx)
drivers/staging/media/hantro/hantro_hw.h +2 -2
index 2fab655bf098..69b88f4d3fb3 100644
@@ -158,8 +158,8 @@ void rk3399_vpu_jpeg_enc_run(struct hantro_ctx *ctx);
 int hantro_jpeg_enc_init(struct hantro_ctx *ctx);
 void hantro_jpeg_enc_exit(struct hantro_ctx *ctx);
 
-struct vb2_buffer *hantro_h264_get_ref_buf(struct hantro_ctx *ctx,
-					   unsigned int dpb_idx);
+dma_addr_t hantro_h264_get_ref_buf(struct hantro_ctx *ctx,
+				   unsigned int dpb_idx);
 int hantro_h264_dec_prepare_run(struct hantro_ctx *ctx);
 void hantro_g1_h264_dec_run(struct hantro_ctx *ctx);
 int hantro_h264_dec_init(struct hantro_ctx *ctx);
drivers/staging/media/hantro/rk3399_vpu_hw_mpeg2_dec.c +2 -5
index 263ec81f209b..b40d2cdf832f 100644
@@ -107,17 +107,14 @@ rk3399_vpu_mpeg2_dec_set_buffers(struct hantro_dev *vpu,
 {
 	dma_addr_t forward_addr = 0, backward_addr = 0;
 	dma_addr_t current_addr, addr;
-	struct vb2_queue *vq;
-
-	vq = v4l2_m2m_get_dst_vq(ctx->fh.m2m_ctx);
 
 	switch (picture->picture_coding_type) {
 	case V4L2_MPEG2_PICTURE_CODING_TYPE_B:
-		backward_addr = hantro_get_ref(vq,
+		backward_addr = hantro_get_ref(ctx,
 					       slice_params->backward_ref_ts);
 		/* fall-through */
 	case V4L2_MPEG2_PICTURE_CODING_TYPE_P:
-		forward_addr = hantro_get_ref(vq,
+		forward_addr = hantro_get_ref(ctx,
 					      slice_params->forward_ref_ts);
 	}
 
drivers/staging/media/hantro/rk3399_vpu_hw_vp8_dec.c +3 -5
index 7d32a0283d93..76d7ed3fd69a 100644
@@ -449,18 +449,16 @@ static void cfg_ref(struct hantro_ctx *ctx,
 {
 	struct hantro_dev *vpu = ctx->dev;
 	struct vb2_v4l2_buffer *vb2_dst;
-	struct vb2_queue *cap_q;
 	dma_addr_t ref;
 
-	cap_q = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
 	vb2_dst = hantro_get_dst_buf(ctx);
 
-	ref = hantro_get_ref(cap_q, hdr->last_frame_ts);
+	ref = hantro_get_ref(ctx, hdr->last_frame_ts);
 	if (!ref)
 		ref = vb2_dma_contig_plane_dma_addr(&vb2_dst->vb2_buf, 0);
 	vdpu_write_relaxed(vpu, ref, VDPU_REG_VP8_ADDR_REF0);
 
-	ref = hantro_get_ref(cap_q, hdr->golden_frame_ts);
+	ref = hantro_get_ref(ctx, hdr->golden_frame_ts);
 	WARN_ON(!ref && hdr->golden_frame_ts);
 	if (!ref)
 		ref = vb2_dma_contig_plane_dma_addr(&vb2_dst->vb2_buf, 0);
@@ -468,7 +466,7 @@ static void cfg_ref(struct hantro_ctx *ctx,
 		ref |= VDPU_REG_VP8_GREF_SIGN_BIAS;
 	vdpu_write_relaxed(vpu, ref, VDPU_REG_VP8_ADDR_REF2_5(2));
 
-	ref = hantro_get_ref(cap_q, hdr->alt_frame_ts);
+	ref = hantro_get_ref(ctx, hdr->alt_frame_ts);
 	WARN_ON(!ref && hdr->alt_frame_ts);
 	if (!ref)
 		ref = vb2_dma_contig_plane_dma_addr(&vb2_dst->vb2_buf, 0);
Signature · 1 line
2.22.0
#5 lore raw

PATCH 3/4 media: hantro: Add helper for the H264 motion vectors allocation

In reply to Ezequiel Garcia

Introduce a helper to allow easier enablement of the post-processing feature. No functional changes intended.

---
 drivers/staging/media/hantro/hantro.h      | 6 ++++++
 drivers/staging/media/hantro/hantro_v4l2.c | 4 ++--
 2 files changed, 8 insertions(+), 2 deletions(-)
drivers/staging/media/hantro/hantro.h +6 -0
index deb90ae37859..e8872f24e351 100644
@@ -381,4 +381,10 @@ hantro_get_dst_buf(struct hantro_ctx *ctx)
 	return v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
 }
 
+static inline unsigned int
+hantro_h264_buffer_extra_size(unsigned int width, unsigned int height)
+{
+	return 128 * MB_WIDTH(width) * MB_HEIGHT(height);
+}
+
 #endif /* HANTRO_H_ */
drivers/staging/media/hantro/hantro_v4l2.c +2 -2
index d48b548842cf..59adecba0e85 100644
@@ -246,8 +246,8 @@ static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f,
 		 */
 		if (ctx->vpu_src_fmt->fourcc == V4L2_PIX_FMT_H264_SLICE)
 			pix_mp->plane_fmt[0].sizeimage +=
-				128 * DIV_ROUND_UP(pix_mp->width, 16) *
-				      DIV_ROUND_UP(pix_mp->height, 16);
+				hantro_h264_buffer_extra_size(pix_mp->width,
+							      pix_mp->height);
 	} else if (!pix_mp->plane_fmt[0].sizeimage) {
 		/*
 		 * For coded formats the application can specify
Signature · 1 line
2.22.0
#6 lore raw

Re: [PATCH 3/4] media: hantro: Add helper for the H264 motion vectors allocation

Quoted 14 lines · Ezequiel Garcia

Introduce a helper to allow easier enablement of the post-processing feature. No functional changes intended.

---
 drivers/staging/media/hantro/hantro.h      | 6 ++++++
 drivers/staging/media/hantro/hantro_v4l2.c | 4 ++--
 2 files changed, 8 insertions(+), 2 deletions(-)
drivers/staging/media/hantro/hantro.h +0 -0
index deb90ae37859..e8872f24e351 100644

drivers/staging/media/hantro/hantro.h hantro_get_dst_buf(struct hantro_ctx *ctx) · line 388

Quoted 8 lines
drivers/staging/media/hantro/hantro.h +5 -0
@@ -381,4 +381,10 @@ hantro_get_dst_buf(struct hantro_ctx *ctx)
 	return v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
 }
 
+static inline unsigned int
+hantro_h264_buffer_extra_size(unsigned int width, unsigned int height)
+{
+	return 128 * MB_WIDTH(width) * MB_HEIGHT(height);
+}

This doesn't seem to be used or modified by patch 4 at all?

Quoted 7 lines
drivers/staging/media/hantro/hantro.h +1 -0
+
 #endif /* HANTRO_H_ */
drivers/staging/media/hantro/hantro_v4l2.c +0 -0
index d48b548842cf..59adecba0e85 100644

drivers/staging/media/hantro/hantro_v4l2.c static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f, · line 253

Quoted 10 lines
drivers/staging/media/hantro/hantro_v4l2.c +2 -2
@@ -246,8 +246,8 @@ static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f,
 		 */
 		if (ctx->vpu_src_fmt->fourcc == V4L2_PIX_FMT_H264_SLICE)
 			pix_mp->plane_fmt[0].sizeimage +=
-				128 * DIV_ROUND_UP(pix_mp->width, 16) *
-				      DIV_ROUND_UP(pix_mp->height, 16);
+				hantro_h264_buffer_extra_size(pix_mp->width,
+							      pix_mp->height);
 	} else if (!pix_mp->plane_fmt[0].sizeimage) {
 		/*
 		 * For coded formats the application can specify

regards
Philipp

#7 lore raw

Re: [PATCH 3/4] media: hantro: Add helper for the H264 motion vectors allocation

Quoted 18 lines · Philipp Zabel
Quoted 17 lines · Ezequiel Garcia

Introduce a helper to allow easier enablement of the post-processing feature. No functional changes intended.

---
 drivers/staging/media/hantro/hantro.h      | 6 ++++++
 drivers/staging/media/hantro/hantro_v4l2.c | 4 ++--
 2 files changed, 8 insertions(+), 2 deletions(-)
drivers/staging/media/hantro/hantro.h +0 -0
index deb90ae37859..e8872f24e351 100644
@@ -381,4 +381,10 @@ hantro_get_dst_buf(struct hantro_ctx *ctx)
 	return v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
 }
 
Quoted 8 lines

drivers/staging/media/hantro/hantro.h hantro_get_dst_buf(struct hantro_ctx *ctx) · line 388

Quoted 5 lines
drivers/staging/media/hantro/hantro.h +5 -0
+static inline unsigned int
+hantro_h264_buffer_extra_size(unsigned int width, unsigned int height)
+
+	return 128 * MB_WIDTH(width) * MB_HEIGHT(height);
+}

This doesn't seem to be used or modified by patch 4 at all?

Oh, thanks for spotting this. Indeed, this patch is superflous. The helper was used, but then after cleaning-up hantro_postproc.c I realized it wasn't needed.

We can drop this one, but OTOH hiding the H264 extra size seems a nice cleanup. Perhaps Jonas can grab this patch as part of his improvements series.

Thanks,
Ezequiel

#8 lore raw

PATCH 4/4 media: hantro: Support color conversion via post-processing

In reply to Ezequiel Garcia

The Hantro G1 decoder is able to enable a post-processor on the decoding pipeline, which can be used to perform scaling and color conversion.

The post-processor is integrated to the decoder, and it's possible to use it in a way that is completely transparent to the user.

This commit enables color conversion via post-processing, which means the driver now exposes YUV packed and RGB pixel formats, in addition to NV12.

On the YUV-to-RGB path, the post-processing pipeline allows to modify the image contrast, brigthness and saturation, so additional user controls are added to expose them.

---
 drivers/staging/media/hantro/Makefile         |   1 +
 drivers/staging/media/hantro/hantro.h         |  23 +-
 drivers/staging/media/hantro/hantro_drv.c     |  24 +-
 .../staging/media/hantro/hantro_g1_h264_dec.c |   2 +-
 .../media/hantro/hantro_g1_mpeg2_dec.c        |   3 +-
 .../staging/media/hantro/hantro_g1_vp8_dec.c  |   2 +-
 drivers/staging/media/hantro/hantro_h264.c    |   7 +-
 drivers/staging/media/hantro/hantro_hw.h      |  11 +
 .../staging/media/hantro/hantro_postproc.c    | 316 ++++++++++++++++++
 drivers/staging/media/hantro/hantro_v4l2.c    |  21 +-
 drivers/staging/media/hantro/rk3288_vpu_hw.c  |  21 ++
 11 files changed, 420 insertions(+), 11 deletions(-)
 create mode 100644 drivers/staging/media/hantro/hantro_postproc.c
drivers/staging/media/hantro/Makefile +1 -0
index 5d6b0383d280..496b30c3c396 100644
@@ -3,6 +3,7 @@ obj-$(CONFIG_VIDEO_HANTRO) += hantro-vpu.o
 hantro-vpu-y += \
 		hantro_drv.o \
 		hantro_v4l2.o \
+		hantro_postproc.o \
 		hantro_h1_jpeg_enc.o \
 		hantro_g1_h264_dec.o \
 		hantro_g1_mpeg2_dec.o \
drivers/staging/media/hantro/hantro.h +22 -1
index e8872f24e351..8446a1fa9ab9 100644
@@ -237,6 +237,7 @@ struct hantro_ctx {
 			  unsigned int bytesused);
 
 	const struct hantro_codec_ops *codec_ops;
+	struct hantro_postproc_ctx postproc;
 
 	/* Specific for particular codec modes. */
 	union {
@@ -250,7 +251,8 @@ struct hantro_ctx {
 /**
  * struct hantro_fmt - information about supported video formats.
  * @name:	Human readable name of the format.
- * @fourcc:	FourCC code of the format. See V4L2_PIX_FMT_*.
+ * @fourcc:	FourCC code of the post-processed format. See V4L2_PIX_FMT_*.
+ * @dec_fourcc:	FourCC code of the native format. See V4L2_PIX_FMT_*.
  * @codec_mode:	Codec mode related to this format. See
  *		enum hantro_codec_mode.
  * @header_size: Optional header size. Currently used by JPEG encoder.
@@ -261,6 +263,7 @@ struct hantro_ctx {
 struct hantro_fmt {
 	char *name;
 	u32 fourcc;
+	u32 dec_fourcc;
 	enum hantro_codec_mode codec_mode;
 	int header_size;
 	int max_depth;
@@ -387,4 +390,22 @@ hantro_h264_buffer_extra_size(unsigned int width, unsigned int height)
 	return 128 * MB_WIDTH(width) * MB_HEIGHT(height);
 }
 
+static inline bool
+hantro_use_postproc(struct hantro_ctx *ctx)
+{
+	return ctx->vpu_dst_fmt->fourcc != ctx->vpu_dst_fmt->dec_fourcc;
+}
+
+static inline dma_addr_t
+hantro_get_dec_buf_addr(struct hantro_ctx *ctx, struct vb2_buffer *vb)
+{
+	if (hantro_use_postproc(ctx))
+		return ctx->postproc.dec_q[vb->index].dma;
+	return vb2_dma_contig_plane_dma_addr(vb, 0);
+}
+
+void hantro_postproc_setup(struct hantro_ctx *ctx);
+void hantro_postproc_free(struct hantro_ctx *ctx);
+int hantro_postproc_alloc(struct hantro_ctx *ctx);
+
 #endif /* HANTRO_H_ */
drivers/staging/media/hantro/hantro_drv.c +22 -2
index f550b68d46ca..300178562014 100644
@@ -53,7 +53,7 @@ dma_addr_t hantro_get_ref(struct hantro_ctx *ctx, u64 ts)
 	if (index < 0)
 		return 0;
 	buf = vb2_get_buffer(q, index);
-	return vb2_dma_contig_plane_dma_addr(buf, 0);
+	return hantro_get_dec_buf_addr(ctx, buf);
 }
 
 static int
@@ -165,6 +165,9 @@ void hantro_finish_run(struct hantro_ctx *ctx)
 {
 	struct vb2_v4l2_buffer *src_buf;
 
+	if (hantro_use_postproc(ctx))
+		hantro_postproc_setup(ctx);
+
 	src_buf = hantro_get_src_buf(ctx);
 	v4l2_ctrl_request_complete(src_buf->vb2_buf.req_obj.req,
 				   &ctx->ctrl_handler);
@@ -365,8 +368,9 @@ static int hantro_ctrls_setup(struct hantro_dev *vpu,
 			      int allowed_codecs)
 {
 	int i, num_ctrls = ARRAY_SIZE(controls);
+	int postproc_ctrls = (allowed_codecs & HANTRO_DECODERS) ? 3 : 0;
 
-	v4l2_ctrl_handler_init(&ctx->ctrl_handler, num_ctrls);
+	v4l2_ctrl_handler_init(&ctx->ctrl_handler, num_ctrls + postproc_ctrls);
 
 	for (i = 0; i < num_ctrls; i++) {
 		if (!(allowed_codecs & controls[i].codec))
@@ -382,6 +386,22 @@ static int hantro_ctrls_setup(struct hantro_dev *vpu,
 			return ctx->ctrl_handler.error;
 		}
 	}
+
+	/*
+	 * Add post-processing controls.
+	 * Only used if the post-processing path is enabled,
+	 * when the application sets a CAPTURE pixel format
+	 * that requires it.
+	 */
+	if (postproc_ctrls) {
+		v4l2_ctrl_new_std(&ctx->ctrl_handler, NULL,
+				  V4L2_CID_CONTRAST, -64, 64, 1, 0);
+		v4l2_ctrl_new_std(&ctx->ctrl_handler, NULL,
+				  V4L2_CID_BRIGHTNESS, -128, 127, 1, 0);
+		v4l2_ctrl_new_std(&ctx->ctrl_handler, NULL,
+				  V4L2_CID_SATURATION, -64, 128, 1, 0);
+	}
+
 	return v4l2_ctrl_handler_setup(&ctx->ctrl_handler);
 }
 
drivers/staging/media/hantro/hantro_g1_h264_dec.c +1 -1
index 29130946dea4..e263a6b50651 100644
@@ -241,7 +241,7 @@ static void set_buffers(struct hantro_ctx *ctx)
 	vdpu_write_relaxed(vpu, src_dma, G1_REG_ADDR_STR);
 
 	/* Destination (decoded frame) buffer. */
-	dst_dma = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
+	dst_dma = hantro_get_dec_buf_addr(ctx, &dst_buf->vb2_buf);
 	vdpu_write_relaxed(vpu, dst_dma, G1_REG_ADDR_DST);
 
 	/* Higher profiles require DMV buffer appended to reference frames. */
drivers/staging/media/hantro/hantro_g1_mpeg2_dec.c +1 -2
index f3bf67d8a289..63fe89ef21ae 100644
@@ -121,7 +121,7 @@ hantro_g1_mpeg2_dec_set_buffers(struct hantro_dev *vpu, struct hantro_ctx *ctx,
 	vdpu_write_relaxed(vpu, addr, G1_REG_RLC_VLC_BASE);
 
 	/* Destination frame buffer */
-	addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
+	addr = hantro_get_dec_buf_addr(ctx, dst_buf);
 	current_addr = addr;
 
 	if (picture->picture_structure == PICT_BOTTOM_FIELD)
@@ -243,7 +243,6 @@ void hantro_g1_mpeg2_dec_run(struct hantro_ctx *ctx)
 	hantro_g1_mpeg2_dec_set_buffers(vpu, ctx, &src_buf->vb2_buf,
 					&dst_buf->vb2_buf,
 					sequence, picture, slice_params);
-
 	hantro_finish_run(ctx);
 
 	reg = G1_REG_DEC_E(1);
drivers/staging/media/hantro/hantro_g1_vp8_dec.c +1 -1
index cad18094fee0..e708994d1aba 100644
@@ -422,7 +422,7 @@ static void cfg_buffers(struct hantro_ctx *ctx,
 	}
 	vdpu_write_relaxed(vpu, reg, G1_REG_FWD_PIC(0));
 
-	dst_dma = vb2_dma_contig_plane_dma_addr(&vb2_dst->vb2_buf, 0);
+	dst_dma = hantro_get_dec_buf_addr(ctx, &vb2_dst->vb2_buf);
 	vdpu_write_relaxed(vpu, dst_dma, G1_REG_ADDR_DST);
 }
 
drivers/staging/media/hantro/hantro_h264.c +6 -1
index 2227b4e12067..d00b3096b7ae 100644
@@ -13,6 +13,7 @@
 #include <linux/types.h>
 #include <linux/sort.h>
 #include <media/v4l2-mem2mem.h>
+#include <media/v4l2-common.h>
 
 #include "hantro.h"
 #include "hantro_hw.h"
@@ -635,7 +636,11 @@ int hantro_h264_dec_init(struct hantro_ctx *ctx)
 	tbl = priv->cpu;
 	memcpy(tbl->cabac_table, h264_cabac_table, sizeof(tbl->cabac_table));
 
-	v4l2_fill_pixfmt_mp(&pix_mp, ctx->dst_fmt.pixelformat,
+	/*
+	 * For the decoder picture size, we want the decoder
+	 * native pixel format, so we use dec_fourcc here.
+	 */
+	v4l2_fill_pixfmt_mp(&pix_mp, ctx->vpu_dst_fmt->dec_fourcc,
 			    ctx->dst_fmt.width, ctx->dst_fmt.height);
 	h264_dec->pic_size = pix_mp.plane_fmt[0].sizeimage;
 
drivers/staging/media/hantro/hantro_hw.h +11 -0
index 69b88f4d3fb3..ae1d869e7c28 100644
@@ -28,11 +28,13 @@ struct hantro_variant;
  * @cpu:	CPU pointer to the buffer.
  * @dma:	DMA address of the buffer.
  * @size:	Size of the buffer.
+ * @attrs:	Attributes of the DMA mapping.
  */
 struct hantro_aux_buf {
 	void *cpu;
 	dma_addr_t dma;
 	size_t size;
+	unsigned long attrs;
 };
 
 /**
@@ -109,6 +111,15 @@ struct hantro_vp8_dec_hw_ctx {
 	struct hantro_aux_buf prob_tbl;
 };
 
+/**
+ * struct hantro_postproc_ctx
+ *
+ * @dec_q:		References buffers, in decoder format.
+ */
+struct hantro_postproc_ctx {
+	struct hantro_aux_buf dec_q[VB2_MAX_FRAME];
+};
+
 /**
  * struct hantro_codec_ops - codec mode specific operations
  *
drivers/staging/media/hantro/hantro_postproc.c new file +316 -0

316 lines not on this page · raw message

drivers/staging/media/hantro/hantro_v4l2.c +18 -3
index 59adecba0e85..37a9ba71afa6 100644
@@ -242,9 +242,10 @@ static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f,
 		/*
 		 * The H264 decoder needs extra space on the output buffers
 		 * to store motion vectors. This is needed for reference
-		 * frames.
+		 * frames and only if the format is non-post-processed (NV12).
 		 */
-		if (ctx->vpu_src_fmt->fourcc == V4L2_PIX_FMT_H264_SLICE)
+		if (ctx->vpu_src_fmt->fourcc == V4L2_PIX_FMT_H264_SLICE &&
+		    fmt->fourcc == V4L2_PIX_FMT_NV12)
 			pix_mp->plane_fmt[0].sizeimage +=
 				hantro_h264_buffer_extra_size(pix_mp->width,
 							      pix_mp->height);
@@ -634,10 +635,23 @@ static int hantro_start_streaming(struct vb2_queue *q, unsigned int count)
 
 		vpu_debug(4, "Codec mode = %d\n", codec_mode);
 		ctx->codec_ops = &ctx->dev->variant->codec_ops[codec_mode];
-		if (ctx->codec_ops->init)
+		if (ctx->codec_ops->init) {
 			ret = ctx->codec_ops->init(ctx);
+			if (ret)
+				return ret;
+		}
+
+		if (hantro_use_postproc(ctx)) {
+			ret = hantro_postproc_alloc(ctx);
+			if (ret)
+				goto err_codec_exit;
+		}
 	}
+	return ret;
 
+err_codec_exit:
+	if (ctx->codec_ops && ctx->codec_ops->exit)
+		ctx->codec_ops->exit(ctx);
 	return ret;
 }
 
@@ -664,6 +678,7 @@ static void hantro_stop_streaming(struct vb2_queue *q)
 	struct hantro_ctx *ctx = vb2_get_drv_priv(q);
 
 	if (hantro_vq_is_coded(q)) {
+		hantro_postproc_free(ctx);
 		if (ctx->codec_ops && ctx->codec_ops->exit)
 			ctx->codec_ops->exit(ctx);
 	}
drivers/staging/media/hantro/rk3288_vpu_hw.c +21 -0
index c0bdd6c02520..18d6b725309b 100644
@@ -59,6 +59,27 @@ static const struct hantro_fmt rk3288_vpu_enc_fmts[] = {
 static const struct hantro_fmt rk3288_vpu_dec_fmts[] = {
 	{
 		.fourcc = V4L2_PIX_FMT_NV12,
+		.dec_fourcc = V4L2_PIX_FMT_NV12,
+		.codec_mode = HANTRO_MODE_NONE,
+	},
+	{
+		.fourcc = V4L2_PIX_FMT_RGBX32,
+		.dec_fourcc = V4L2_PIX_FMT_NV12,
+		.codec_mode = HANTRO_MODE_NONE,
+	},
+	{
+		.fourcc = V4L2_PIX_FMT_XRGB32,
+		.dec_fourcc = V4L2_PIX_FMT_NV12,
+		.codec_mode = HANTRO_MODE_NONE,
+	},
+	{
+		.fourcc = V4L2_PIX_FMT_XBGR32,
+		.dec_fourcc = V4L2_PIX_FMT_NV12,
+		.codec_mode = HANTRO_MODE_NONE,
+	},
+	{
+		.fourcc = V4L2_PIX_FMT_YUYV,
+		.dec_fourcc = V4L2_PIX_FMT_NV12,
 		.codec_mode = HANTRO_MODE_NONE,
 	},
 	{
Signature · 1 line
2.22.0
#9 lore raw

Re: [PATCH 4/4] media: hantro: Support color conversion via post-processing

Quoted 501 lines · Ezequiel Garcia

The Hantro G1 decoder is able to enable a post-processor on the decoding pipeline, which can be used to perform scaling and color conversion.

The post-processor is integrated to the decoder, and it's possible to use it in a way that is completely transparent to the user.

This commit enables color conversion via post-processing, which means the driver now exposes YUV packed and RGB pixel formats, in addition to NV12.

On the YUV-to-RGB path, the post-processing pipeline allows to modify the image contrast, brigthness and saturation, so additional user controls are added to expose them.

---
 drivers/staging/media/hantro/Makefile         |   1 +
 drivers/staging/media/hantro/hantro.h         |  23 +-
 drivers/staging/media/hantro/hantro_drv.c     |  24 +-
 .../staging/media/hantro/hantro_g1_h264_dec.c |   2 +-
 .../media/hantro/hantro_g1_mpeg2_dec.c        |   3 +-
 .../staging/media/hantro/hantro_g1_vp8_dec.c  |   2 +-
 drivers/staging/media/hantro/hantro_h264.c    |   7 +-
 drivers/staging/media/hantro/hantro_hw.h      |  11 +
 .../staging/media/hantro/hantro_postproc.c    | 316 ++++++++++++++++++
 drivers/staging/media/hantro/hantro_v4l2.c    |  21 +-
 drivers/staging/media/hantro/rk3288_vpu_hw.c  |  21 ++
 11 files changed, 420 insertions(+), 11 deletions(-)
 create mode 100644 drivers/staging/media/hantro/hantro_postproc.c
drivers/staging/media/hantro/Makefile +1 -0
index 5d6b0383d280..496b30c3c396 100644
@@ -3,6 +3,7 @@ obj-$(CONFIG_VIDEO_HANTRO) += hantro-vpu.o
 hantro-vpu-y += \
 		hantro_drv.o \
 		hantro_v4l2.o \
+		hantro_postproc.o \
 		hantro_h1_jpeg_enc.o \
 		hantro_g1_h264_dec.o \
 		hantro_g1_mpeg2_dec.o \
drivers/staging/media/hantro/hantro.h +22 -1
index e8872f24e351..8446a1fa9ab9 100644
@@ -237,6 +237,7 @@ struct hantro_ctx {
 			  unsigned int bytesused);
 
 	const struct hantro_codec_ops *codec_ops;
+	struct hantro_postproc_ctx postproc;
 
 	/* Specific for particular codec modes. */
 	union {
@@ -250,7 +251,8 @@ struct hantro_ctx {
 /**
  * struct hantro_fmt - information about supported video formats.
  * @name:	Human readable name of the format.
- * @fourcc:	FourCC code of the format. See V4L2_PIX_FMT_*.
+ * @fourcc:	FourCC code of the post-processed format. See V4L2_PIX_FMT_*.
+ * @dec_fourcc:	FourCC code of the native format. See V4L2_PIX_FMT_*.
  * @codec_mode:	Codec mode related to this format. See
  *		enum hantro_codec_mode.
  * @header_size: Optional header size. Currently used by JPEG encoder.
@@ -261,6 +263,7 @@ struct hantro_ctx {
 struct hantro_fmt {
 	char *name;
 	u32 fourcc;
+	u32 dec_fourcc;
 	enum hantro_codec_mode codec_mode;
 	int header_size;
 	int max_depth;
@@ -387,4 +390,22 @@ hantro_h264_buffer_extra_size(unsigned int width, unsigned int height)
 	return 128 * MB_WIDTH(width) * MB_HEIGHT(height);
 }
 
+static inline bool
+hantro_use_postproc(struct hantro_ctx *ctx)
+{
+	return ctx->vpu_dst_fmt->fourcc != ctx->vpu_dst_fmt->dec_fourcc;
+}
+
+static inline dma_addr_t
+hantro_get_dec_buf_addr(struct hantro_ctx *ctx, struct vb2_buffer *vb)
+{
+	if (hantro_use_postproc(ctx))
+		return ctx->postproc.dec_q[vb->index].dma;
+	return vb2_dma_contig_plane_dma_addr(vb, 0);
+}
+
+void hantro_postproc_setup(struct hantro_ctx *ctx);
+void hantro_postproc_free(struct hantro_ctx *ctx);
+int hantro_postproc_alloc(struct hantro_ctx *ctx);
+
 #endif /* HANTRO_H_ */
drivers/staging/media/hantro/hantro_drv.c +22 -2
index f550b68d46ca..300178562014 100644
@@ -53,7 +53,7 @@ dma_addr_t hantro_get_ref(struct hantro_ctx *ctx, u64 ts)
 	if (index < 0)
 		return 0;
 	buf = vb2_get_buffer(q, index);
-	return vb2_dma_contig_plane_dma_addr(buf, 0);
+	return hantro_get_dec_buf_addr(ctx, buf);
 }
 
 static int
@@ -165,6 +165,9 @@ void hantro_finish_run(struct hantro_ctx *ctx)
 {
 	struct vb2_v4l2_buffer *src_buf;
 
+	if (hantro_use_postproc(ctx))
+		hantro_postproc_setup(ctx);
+
 	src_buf = hantro_get_src_buf(ctx);
 	v4l2_ctrl_request_complete(src_buf->vb2_buf.req_obj.req,
 				   &ctx->ctrl_handler);
@@ -365,8 +368,9 @@ static int hantro_ctrls_setup(struct hantro_dev *vpu,
 			      int allowed_codecs)
 {
 	int i, num_ctrls = ARRAY_SIZE(controls);
+	int postproc_ctrls = (allowed_codecs & HANTRO_DECODERS) ? 3 : 0;
 
-	v4l2_ctrl_handler_init(&ctx->ctrl_handler, num_ctrls);
+	v4l2_ctrl_handler_init(&ctx->ctrl_handler, num_ctrls + postproc_ctrls);
 
 	for (i = 0; i < num_ctrls; i++) {
 		if (!(allowed_codecs & controls[i].codec))
@@ -382,6 +386,22 @@ static int hantro_ctrls_setup(struct hantro_dev *vpu,
 			return ctx->ctrl_handler.error;
 		}
 	}
+
+	/*
+	 * Add post-processing controls.
+	 * Only used if the post-processing path is enabled,
+	 * when the application sets a CAPTURE pixel format
+	 * that requires it.
+	 */
+	if (postproc_ctrls) {
+		v4l2_ctrl_new_std(&ctx->ctrl_handler, NULL,
+				  V4L2_CID_CONTRAST, -64, 64, 1, 0);
+		v4l2_ctrl_new_std(&ctx->ctrl_handler, NULL,
+				  V4L2_CID_BRIGHTNESS, -128, 127, 1, 0);
+		v4l2_ctrl_new_std(&ctx->ctrl_handler, NULL,
+				  V4L2_CID_SATURATION, -64, 128, 1, 0);
+	}
+
 	return v4l2_ctrl_handler_setup(&ctx->ctrl_handler);
 }
 
drivers/staging/media/hantro/hantro_g1_h264_dec.c +1 -1
index 29130946dea4..e263a6b50651 100644
@@ -241,7 +241,7 @@ static void set_buffers(struct hantro_ctx *ctx)
 	vdpu_write_relaxed(vpu, src_dma, G1_REG_ADDR_STR);
 
 	/* Destination (decoded frame) buffer. */
-	dst_dma = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
+	dst_dma = hantro_get_dec_buf_addr(ctx, &dst_buf->vb2_buf);
 	vdpu_write_relaxed(vpu, dst_dma, G1_REG_ADDR_DST);
 
 	/* Higher profiles require DMV buffer appended to reference frames. */
drivers/staging/media/hantro/hantro_g1_mpeg2_dec.c +1 -2
index f3bf67d8a289..63fe89ef21ae 100644
@@ -121,7 +121,7 @@ hantro_g1_mpeg2_dec_set_buffers(struct hantro_dev *vpu, struct hantro_ctx *ctx,
 	vdpu_write_relaxed(vpu, addr, G1_REG_RLC_VLC_BASE);
 
 	/* Destination frame buffer */
-	addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
+	addr = hantro_get_dec_buf_addr(ctx, dst_buf);
 	current_addr = addr;
 
 	if (picture->picture_structure == PICT_BOTTOM_FIELD)
@@ -243,7 +243,6 @@ void hantro_g1_mpeg2_dec_run(struct hantro_ctx *ctx)
 	hantro_g1_mpeg2_dec_set_buffers(vpu, ctx, &src_buf->vb2_buf,
 					&dst_buf->vb2_buf,
 					sequence, picture, slice_params);
-
 	hantro_finish_run(ctx);
 
 	reg = G1_REG_DEC_E(1);
drivers/staging/media/hantro/hantro_g1_vp8_dec.c +1 -1
index cad18094fee0..e708994d1aba 100644
@@ -422,7 +422,7 @@ static void cfg_buffers(struct hantro_ctx *ctx,
 	}
 	vdpu_write_relaxed(vpu, reg, G1_REG_FWD_PIC(0));
 
-	dst_dma = vb2_dma_contig_plane_dma_addr(&vb2_dst->vb2_buf, 0);
+	dst_dma = hantro_get_dec_buf_addr(ctx, &vb2_dst->vb2_buf);
 	vdpu_write_relaxed(vpu, dst_dma, G1_REG_ADDR_DST);
 }
 
drivers/staging/media/hantro/hantro_h264.c +6 -1
index 2227b4e12067..d00b3096b7ae 100644
@@ -13,6 +13,7 @@
 #include <linux/types.h>
 #include <linux/sort.h>
 #include <media/v4l2-mem2mem.h>
+#include <media/v4l2-common.h>
 
 #include "hantro.h"
 #include "hantro_hw.h"
@@ -635,7 +636,11 @@ int hantro_h264_dec_init(struct hantro_ctx *ctx)
 	tbl = priv->cpu;
 	memcpy(tbl->cabac_table, h264_cabac_table, sizeof(tbl->cabac_table));
 
-	v4l2_fill_pixfmt_mp(&pix_mp, ctx->dst_fmt.pixelformat,
+	/*
+	 * For the decoder picture size, we want the decoder
+	 * native pixel format, so we use dec_fourcc here.
+	 */
+	v4l2_fill_pixfmt_mp(&pix_mp, ctx->vpu_dst_fmt->dec_fourcc,
 			    ctx->dst_fmt.width, ctx->dst_fmt.height);
 	h264_dec->pic_size = pix_mp.plane_fmt[0].sizeimage;
 
drivers/staging/media/hantro/hantro_hw.h +11 -0
index 69b88f4d3fb3..ae1d869e7c28 100644
@@ -28,11 +28,13 @@ struct hantro_variant;
  * @cpu:	CPU pointer to the buffer.
  * @dma:	DMA address of the buffer.
  * @size:	Size of the buffer.
+ * @attrs:	Attributes of the DMA mapping.
  */
 struct hantro_aux_buf {
 	void *cpu;
 	dma_addr_t dma;
 	size_t size;
+	unsigned long attrs;
 };
 
 /**
@@ -109,6 +111,15 @@ struct hantro_vp8_dec_hw_ctx {
 	struct hantro_aux_buf prob_tbl;
 };
 
+/**
+ * struct hantro_postproc_ctx
+ *
+ * @dec_q:		References buffers, in decoder format.
+ */
+struct hantro_postproc_ctx {
+	struct hantro_aux_buf dec_q[VB2_MAX_FRAME];
+};
+
 /**
  * struct hantro_codec_ops - codec mode specific operations
  *
drivers/staging/media/hantro/hantro_postproc.c new file +235 -0
new file mode 100644
index 000000000000..17d023a253a8
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hantro G1 post-processor support
+ *
+ * Copyright (C) 2019 Collabora, Ltd.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/types.h>
+
+#include "hantro.h"
+#include "hantro_hw.h"
+
+#define G1_SWREG(nr)		((nr) * 4)
+
+#define G1_REG_PP_INTERRUPT		G1_SWREG(60)
+#define    G1_REG_PP_READY_IRQ		BIT(12)
+#define    G1_REG_PP_IRQ		BIT(8)
+#define    G1_REG_PP_IRQ_DIS		BIT(4)
+#define    G1_REG_PP_PIPELINE_EN	BIT(1)
+#define    G1_REG_PP_EXTERNAL_TRIGGER	BIT(0)
+#define G1_REG_PP_DEV_CONFIG		G1_SWREG(61)
+#define     G1_REG_PP_AXI_RD_ID(v)	(((v) << 24) & GENMASK(31, 24))
+#define     G1_REG_PP_AXI_WR_ID(v)	(((v) << 16) & GENMASK(23, 16))
+#define     G1_REG_PP_INSWAP32_E(v)	((v) ? BIT(10) : 0)
+#define     G1_REG_PP_DATA_DISC_E(v)	((v) ? BIT(9) : 0)
+#define     G1_REG_PP_CLK_GATE_E(v)	((v) ? BIT(8) : 0)
+#define     G1_REG_PP_IN_ENDIAN(v)	((v) ? BIT(7) : 0)
+#define     G1_REG_PP_OUT_ENDIAN(v)	((v) ? BIT(6) : 0)
+#define     G1_REG_PP_OUTSWAP32_E(v)	((v) ? BIT(5) : 0)
+#define     G1_REG_PP_MAX_BURST(v)	(((v) << 0) & GENMASK(4, 0))
+#define G1_REG_PP_IN_LUMA_BASE		G1_SWREG(63)
+#define G1_REG_PP_IN_CB_BASE		G1_SWREG(64)
+#define G1_REG_PP_IN_CR_BASE		G1_SWREG(65)
+#define G1_REG_PP_OUT_LUMA_BASE		G1_SWREG(66)
+#define G1_REG_PP_OUT_CHROMA_BASE	G1_SWREG(67)
+#define G1_REG_PP_CONTRAST_ADJUST	G1_SWREG(68)
+#define G1_REG_PP_COLOR_CONVERSION	G1_SWREG(69)
+#define G1_REG_PP_COLOR_CONVERSION0	G1_SWREG(70)
+#define G1_REG_PP_COLOR_CONVERSION1	G1_SWREG(71)
+#define G1_REG_PP_INPUT_SIZE		G1_SWREG(72)
+#define    G1_REG_PP_INPUT_SIZE_HEIGHT(v) (((v) << 9) & GENMASK(16, 9))
+#define    G1_REG_PP_INPUT_SIZE_WIDTH(v)  (((v) << 0) & GENMASK(8, 0))
+#define G1_REG_PP_SCALING0		G1_SWREG(79)
+#define     G1_REG_PP_PADD_R(v)	(((v) << 23) & GENMASK(27, 23))
+#define     G1_REG_PP_PADD_G(v)	(((v) << 18) & GENMASK(22, 18))
+#define     G1_REG_PP_RANGEMAP_Y(v) ((v) ? BIT(31) : 0)
+#define     G1_REG_PP_RANGEMAP_C(v) ((v) ? BIT(30) : 0)
+#define     G1_REG_PP_YCBCR_RANGE(v) ((v) ? BIT(29) : 0)
+#define     G1_REG_PP_RGB_16(v) ((v) ? BIT(28) : 0)
+#define G1_REG_PP_SCALING1		G1_SWREG(80)
+#define     G1_REG_PP_PADD_B(v)	(((v) << 18) & GENMASK(22, 18))
+#define G1_REG_PP_MASK_R		G1_SWREG(82)
+#define G1_REG_PP_MASK_G		G1_SWREG(83)
+#define G1_REG_PP_MASK_B		G1_SWREG(84)
+#define G1_REG_PP_CONTROL		G1_SWREG(85)
+#define     G1_REG_PP_CONTROL_IN_FMT(v)	(((v) << 29) & GENMASK(31, 29))
+#define     G1_REG_PP_CONTROL_OUT_FMT(v) (((v) << 26) & GENMASK(28, 26))
+#define     G1_REG_PP_CONTROL_OUT_HEIGHT(v) (((v) << 15) & GENMASK(25, 15))
+#define     G1_REG_PP_CONTROL_OUT_WIDTH(v) (((v) << 4) & GENMASK(14, 4))
+#define G1_REG_PP_MASK1_ORIG_WIDTH	G1_SWREG(88)
+#define     G1_REG_PP_ORIG_WIDTH(v)	(((v) << 23) & GENMASK(31, 23))
+#define G1_REG_PP_DISPLAY_WIDTH		G1_SWREG(92)
+#define G1_REG_PP_FUSE			G1_SWREG(99)
+
+#define VPU_PP_IN_YUYV			0x0
+#define VPU_PP_IN_NV12			0x1
+#define VPU_PP_IN_YUV420		0x2
+#define VPU_PP_IN_YUV240_TILED		0x5
+#define VPU_PP_OUT_RGB			0x0
+#define VPU_PP_OUT_YUYV			0x3
+
+#define DEF_COLOR_COEFF_A 298
+#define DEF_COLOR_COEFF_B 409
+#define DEF_COLOR_COEFF_C 208
+#define DEF_COLOR_COEFF_D 100
+#define DEF_COLOR_COEFF_E 516
+
+static const struct hantro_reg reg_color_a2 = { G1_REG_PP_COLOR_CONVERSION, 18, 0x3ff };
+static const struct hantro_reg reg_color_a1 = { G1_REG_PP_COLOR_CONVERSION, 8, 0x3ff };
+static const struct hantro_reg reg_color_b = { G1_REG_PP_COLOR_CONVERSION0, 0, 0x3ff };
+static const struct hantro_reg reg_color_c = { G1_REG_PP_COLOR_CONVERSION0, 10, 0x3ff };
+static const struct hantro_reg reg_color_d = { G1_REG_PP_COLOR_CONVERSION0, 20, 0x3ff };
+static const struct hantro_reg reg_color_e = { G1_REG_PP_COLOR_CONVERSION1, 0, 0x3ff };
+static const struct hantro_reg reg_color_f = { G1_REG_PP_COLOR_CONVERSION1, 10, 0xff };
+static const struct hantro_reg reg_contrast_thr1 = { G1_REG_PP_CONTRAST_ADJUST, 24, 0xff };
+static const struct hantro_reg reg_contrast_thr2 = { G1_REG_PP_COLOR_CONVERSION, 0, 0xff };
+static const struct hantro_reg reg_contrast_off1 = { G1_REG_PP_CONTRAST_ADJUST, 0, 0x3ff };
+static const struct hantro_reg reg_contrast_off2 = { G1_REG_PP_CONTRAST_ADJUST, 10, 0x3ff };
+static const struct hantro_reg reg_ycbcr_range = { G1_REG_PP_SCALING0, 29, 0x1 };
+static const struct hantro_reg reg_pad_r = { G1_REG_PP_SCALING0, 23, 0x1f };
+static const struct hantro_reg reg_pad_g = { G1_REG_PP_SCALING0, 18, 0x1f };
+static const struct hantro_reg reg_pad_b = { G1_REG_PP_SCALING1, 18, 0x1f };
+
+static s32 hantro_postproc_get_ctrl(struct hantro_ctx *ctx, u32 id, s32 def_val)
+{
+	struct v4l2_ctrl *ctrl;
+
+	ctrl = v4l2_ctrl_find(&ctx->ctrl_handler, id);
+	if (!ctrl)
+		return def_val;
+	return v4l2_ctrl_g_ctrl(ctrl);
+}
+
+static void hantro_postproc_setup_rgb(struct hantro_ctx *ctx)
+{
+	struct hantro_dev *vpu = ctx->dev;
+	s32 thr1y, thr2y;
+	s32 thr1, thr2;
+	s32 off1, off2;
+	s32 a1, a2;
+	s32 tmp, satur;
+	s32 contrast, saturation, brightness;
+
+	contrast = hantro_postproc_get_ctrl(ctx, V4L2_CID_CONTRAST, 0);
+	brightness = hantro_postproc_get_ctrl(ctx, V4L2_CID_BRIGHTNESS, 0);
+	saturation = hantro_postproc_get_ctrl(ctx, V4L2_CID_SATURATION, 0);
+
+	if (ctx->src_fmt.quantization == V4L2_QUANTIZATION_LIM_RANGE) {
+		s32 tmp1, tmp2;
+
+		thr1 = (219 * (contrast + 128)) / 512;
+		thr1y = (219 - 2 * thr1) / 2;
+		thr2 = 219 - thr1;
+		thr2y = 219 - thr1y;
+
+		tmp1 = (thr1y * 256) / thr1;
+		tmp2 = ((thr2y - thr1y) * 256) / (thr2 - thr1);
+		off1 = ((thr1y - ((tmp2 * thr1) / 256)) * (s32)DEF_COLOR_COEFF_A) / 256;
+		off2 = ((thr2y - ((tmp1 * thr2) / 256)) * (s32)DEF_COLOR_COEFF_A) / 256;
+
+		tmp1 = (64 * (contrast + 128)) / 128;
+		tmp2 = 256 * (128 - tmp1);
+		a1 = (tmp2 + off2) / thr1;
+		a2 = a1 + (256 * (off2 - 1)) / (thr2 - thr1);
+	} else {
+		thr1 = (64 * (contrast + 128)) / 128;
+		thr1y = 128 - thr1;
+		thr2 = 256 - thr1;
+		thr2y = 256 - thr1y;
+		a1 = (thr1y * 256) / thr1;
+		a2 = ((thr2y - thr1y) * 256) / (thr2 - thr1);
+		off1 = thr1y - (a2 * thr1) / 256;
+		off2 = thr2y - (a1 * thr2) / 256;
+	}
+
+	a1 = clamp(a1, 0, 1023);
+	a2 = clamp(a2, 0, 1023);
+	thr1 = clamp(thr1, 0, 255);
+	thr2 = clamp(thr2, 0, 255);
+	off1 = clamp(off1, -512, 511);
+	off2 = clamp(off2, -512, 511);
+
+	hantro_reg_write(vpu, &reg_contrast_thr1, thr1);
+	hantro_reg_write(vpu, &reg_contrast_thr2, thr2);
+	hantro_reg_write(vpu, &reg_contrast_off1, off1);
+	hantro_reg_write(vpu, &reg_contrast_off2, off2);
+	hantro_reg_write(vpu, &reg_color_a1, a1);
+	hantro_reg_write(vpu, &reg_color_a2, a2);
+
+	/* Brightness */
+	hantro_reg_write(vpu, &reg_color_f, brightness);
+
+	/* Saturation */
+	satur = 64 + saturation;
+	tmp = (satur * (s32)DEF_COLOR_COEFF_B) / 64;
+	tmp = clamp(tmp, 0, 1023);
+	hantro_reg_write(vpu, &reg_color_b, tmp);
+
+	tmp = (satur * (s32)DEF_COLOR_COEFF_C) / 64;
+	tmp = clamp(tmp, 0, 1023);
+	hantro_reg_write(vpu, &reg_color_c, tmp);
+
+	tmp = (satur * (s32)DEF_COLOR_COEFF_D) / 64;
+	tmp = clamp(tmp, 0, 1023);
+	hantro_reg_write(vpu, &reg_color_d, tmp);
+
+	tmp = (satur * (s32)DEF_COLOR_COEFF_E) / 64;
+	tmp = clamp(tmp, 0, 1023);
+	hantro_reg_write(vpu, &reg_color_e, tmp);
+
+	/* Set RGB padding and mask */
+	switch (ctx->vpu_dst_fmt->fourcc) {
+	case V4L2_PIX_FMT_RGBX32:
+		hantro_reg_write(vpu, &reg_pad_r, 0);
+		hantro_reg_write(vpu, &reg_pad_g, 8);
+		hantro_reg_write(vpu, &reg_pad_b, 16);
+
+		vdpu_write_relaxed(vpu, 0xff000000, G1_REG_PP_MASK_R);
+		vdpu_write_relaxed(vpu, 0x00ff0000, G1_REG_PP_MASK_G);
+		vdpu_write_relaxed(vpu, 0x0000ff00, G1_REG_PP_MASK_B);
+		break;
+	case V4L2_PIX_FMT_XRGB32:
+		hantro_reg_write(vpu, &reg_pad_r, 8);
+		hantro_reg_write(vpu, &reg_pad_g, 16);
+		hantro_reg_write(vpu, &reg_pad_b, 24);
+
+		vdpu_write_relaxed(vpu, 0x00ff0000, G1_REG_PP_MASK_R);
+		vdpu_write_relaxed(vpu, 0x0000ff00, G1_REG_PP_MASK_G);
+		vdpu_write_relaxed(vpu, 0x000000ff, G1_REG_PP_MASK_B);
+		break;
+	case V4L2_PIX_FMT_XBGR32:
+		hantro_reg_write(vpu, &reg_pad_b, 0);
+		hantro_reg_write(vpu, &reg_pad_g, 8);
+		hantro_reg_write(vpu, &reg_pad_r, 16);
+
+		vdpu_write_relaxed(vpu, 0xff000000, G1_REG_PP_MASK_B);
+		vdpu_write_relaxed(vpu, 0x00ff0000, G1_REG_PP_MASK_G);
+		vdpu_write_relaxed(vpu, 0x0000ff00, G1_REG_PP_MASK_R);
+		break;
+	}
+}
+
+void hantro_postproc_setup(struct hantro_ctx *ctx)
+{
+	struct hantro_dev *vpu = ctx->dev;
+	struct vb2_v4l2_buffer *dst_buf;
+	u32 reg, src_pp_fmt, dst_pp_fmt;
+	dma_addr_t dst_dma;
+
+	/* Turn on pipeline mode. Must be done first. */
+	vdpu_write(vpu, G1_REG_PP_PIPELINE_EN, G1_REG_PP_INTERRUPT);
+
+	reg = G1_REG_PP_AXI_RD_ID(0) |
+	      G1_REG_PP_AXI_WR_ID(0) |
+	      G1_REG_PP_INSWAP32_E(1) |
+	      G1_REG_PP_OUTSWAP32_E(1) |
+	      G1_REG_PP_DATA_DISC_E(0) |
+	      G1_REG_PP_CLK_GATE_E(1) |
+	      G1_REG_PP_IN_ENDIAN(1) |
+	      G1_REG_PP_OUT_ENDIAN(1) |
+	      G1_REG_PP_MAX_BURST(16);
+	vdpu_write_relaxed(vpu, reg, G1_REG_PP_DEV_CONFIG);
+
+	/* Configure picture resolution. */

drivers/staging/media/hantro/hantro_postproc.c line 245

Quoted 10 lines
drivers/staging/media/hantro/hantro_postproc.c new file +10 -0
+	reg = G1_REG_PP_INPUT_SIZE_HEIGHT(MB_HEIGHT(ctx->dst_fmt.height)) |
+	      G1_REG_PP_INPUT_SIZE_WIDTH(MB_WIDTH(ctx->dst_fmt.width));
+	vdpu_write_relaxed(vpu, reg, G1_REG_PP_INPUT_SIZE);
+
+	dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
+	dst_dma = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
+	vdpu_write_relaxed(vpu, dst_dma, G1_REG_PP_OUT_LUMA_BASE);
+
+	reg = (ctx->dst_fmt.quantization ==
+	       V4L2_QUANTIZATION_LIM_RANGE) ? 0 : 1;

Why dst_fmt? Userspace cannot set the quantization range of the capture format, it's either copied from the source format or explicitly set in the driver.

I see this code in vidioc_s_fmt_cap_mplane():

        /* Colorimetry information are always propagated. */
        ctx->src_fmt.colorspace = pix_mp->colorspace;
        ctx->src_fmt.ycbcr_enc = pix_mp->ycbcr_enc;
        ctx->src_fmt.xfer_func = pix_mp->xfer_func;
        ctx->src_fmt.quantization = pix_mp->quantization;

I think this is wrong.

If I am not mistaken, userspace has parsed this information from the bytestream and should pass it to the driver when it calls S_FMT for the output queue. Please correct me if I am wrong. But this information has to come from somewhere.

These values should be propagated to the capture queue.

Adding YUV to RGB conversion changes this: in that case you want to convert to full range RGB. So both ycbcr_enc and quantization can be set to the DEFAULT value for the RGB capture format. The colorspace and xfer_func values are copied as before since those are not converted by the post-processing step.

Regards,

Hans

Quoted 154 lines
drivers/staging/media/hantro/hantro_postproc.c new file +71 -0
+	hantro_reg_write(vpu, &reg_ycbcr_range, reg);
+
+	/* Clear this register before setting the RGB coefficients. */
+	vdpu_write_relaxed(vpu, 0, G1_REG_PP_SCALING1);
+
+	switch (ctx->vpu_dst_fmt->fourcc) {
+	case V4L2_PIX_FMT_YUYV:
+		dst_pp_fmt = VPU_PP_OUT_YUYV;
+		break;
+	case V4L2_PIX_FMT_RGBX32:
+	case V4L2_PIX_FMT_XRGB32:
+	case V4L2_PIX_FMT_XBGR32:
+		dst_pp_fmt = VPU_PP_OUT_RGB;
+		hantro_postproc_setup_rgb(ctx);
+		break;
+	default:
+		return;
+	}
+
+	/* Currently NV12 is the only supported input pixel format. */
+	src_pp_fmt = VPU_PP_IN_NV12;
+
+	/* Configure src/dst post-processor formats. */
+	reg = G1_REG_PP_CONTROL_IN_FMT(src_pp_fmt) |
+	      G1_REG_PP_CONTROL_OUT_FMT(dst_pp_fmt) |
+	      G1_REG_PP_CONTROL_OUT_HEIGHT(ctx->dst_fmt.height) |
+	      G1_REG_PP_CONTROL_OUT_WIDTH(ctx->dst_fmt.width);
+	vdpu_write_relaxed(vpu, reg, G1_REG_PP_CONTROL);
+
+	reg = G1_REG_PP_ORIG_WIDTH(MB_WIDTH(ctx->dst_fmt.width));
+	vdpu_write_relaxed(vpu, reg, G1_REG_PP_MASK1_ORIG_WIDTH);
+	vdpu_write_relaxed(vpu, ctx->dst_fmt.width, G1_REG_PP_DISPLAY_WIDTH);
+}
+
+void hantro_postproc_free(struct hantro_ctx *ctx)
+{
+	struct hantro_dev *vpu = ctx->dev;
+	unsigned int i;
+
+	for (i = 0; i < VB2_MAX_FRAME; ++i) {
+		struct hantro_aux_buf *priv = &ctx->postproc.dec_q[i];
+
+		if (priv->cpu) {
+			dma_free_attrs(vpu->dev, priv->size, priv->cpu,
+				       priv->dma, priv->attrs);
+			priv->cpu = NULL;
+		}
+	}
+}
+
+int hantro_postproc_alloc(struct hantro_ctx *ctx)
+{
+	struct hantro_dev *vpu = ctx->dev;
+	unsigned int i, buf_size;
+
+	buf_size = ctx->dst_fmt.plane_fmt[0].sizeimage;
+
+	for (i = 0; i < VB2_MAX_FRAME; ++i) {
+		struct hantro_aux_buf *priv = &ctx->postproc.dec_q[i];
+
+		priv->attrs = DMA_ATTR_NO_KERNEL_MAPPING |
+			      DMA_ATTR_WRITE_COMBINE |
+			      DMA_ATTR_NON_CONSISTENT;
+		priv->cpu = dma_alloc_attrs(vpu->dev, buf_size, &priv->dma,
+					    GFP_KERNEL, priv->attrs);
+		if (!priv->cpu)
+			return -ENOMEM;
+		priv->size = buf_size;
+	}
+	return 0;
+}
drivers/staging/media/hantro/hantro_v4l2.c +18 -3
index 59adecba0e85..37a9ba71afa6 100644
@@ -242,9 +242,10 @@ static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f,
 		/*
 		 * The H264 decoder needs extra space on the output buffers
 		 * to store motion vectors. This is needed for reference
-		 * frames.
+		 * frames and only if the format is non-post-processed (NV12).
 		 */
-		if (ctx->vpu_src_fmt->fourcc == V4L2_PIX_FMT_H264_SLICE)
+		if (ctx->vpu_src_fmt->fourcc == V4L2_PIX_FMT_H264_SLICE &&
+		    fmt->fourcc == V4L2_PIX_FMT_NV12)
 			pix_mp->plane_fmt[0].sizeimage +=
 				hantro_h264_buffer_extra_size(pix_mp->width,
 							      pix_mp->height);
@@ -634,10 +635,23 @@ static int hantro_start_streaming(struct vb2_queue *q, unsigned int count)
 
 		vpu_debug(4, "Codec mode = %d\n", codec_mode);
 		ctx->codec_ops = &ctx->dev->variant->codec_ops[codec_mode];
-		if (ctx->codec_ops->init)
+		if (ctx->codec_ops->init) {
 			ret = ctx->codec_ops->init(ctx);
+			if (ret)
+				return ret;
+		}
+
+		if (hantro_use_postproc(ctx)) {
+			ret = hantro_postproc_alloc(ctx);
+			if (ret)
+				goto err_codec_exit;
+		}
 	}
+	return ret;
 
+err_codec_exit:
+	if (ctx->codec_ops && ctx->codec_ops->exit)
+		ctx->codec_ops->exit(ctx);
 	return ret;
 }
 
@@ -664,6 +678,7 @@ static void hantro_stop_streaming(struct vb2_queue *q)
 	struct hantro_ctx *ctx = vb2_get_drv_priv(q);
 
 	if (hantro_vq_is_coded(q)) {
+		hantro_postproc_free(ctx);
 		if (ctx->codec_ops && ctx->codec_ops->exit)
 			ctx->codec_ops->exit(ctx);
 	}
drivers/staging/media/hantro/rk3288_vpu_hw.c +21 -0
index c0bdd6c02520..18d6b725309b 100644
@@ -59,6 +59,27 @@ static const struct hantro_fmt rk3288_vpu_enc_fmts[] = {
 static const struct hantro_fmt rk3288_vpu_dec_fmts[] = {
 	{
 		.fourcc = V4L2_PIX_FMT_NV12,
+		.dec_fourcc = V4L2_PIX_FMT_NV12,
+		.codec_mode = HANTRO_MODE_NONE,
+	},
+	{
+		.fourcc = V4L2_PIX_FMT_RGBX32,
+		.dec_fourcc = V4L2_PIX_FMT_NV12,
+		.codec_mode = HANTRO_MODE_NONE,
+	},
+	{
+		.fourcc = V4L2_PIX_FMT_XRGB32,
+		.dec_fourcc = V4L2_PIX_FMT_NV12,
+		.codec_mode = HANTRO_MODE_NONE,
+	},
+	{
+		.fourcc = V4L2_PIX_FMT_XBGR32,
+		.dec_fourcc = V4L2_PIX_FMT_NV12,
+		.codec_mode = HANTRO_MODE_NONE,
+	},
+	{
+		.fourcc = V4L2_PIX_FMT_YUYV,
+		.dec_fourcc = V4L2_PIX_FMT_NV12,
 		.codec_mode = HANTRO_MODE_NONE,
 	},
 	{
#10 lore raw

Re: [PATCH 4/4] media: hantro: Support color conversion via post-processing

Quoted 525 lines · Hans Verkuil
Quoted 501 lines · Ezequiel Garcia

The Hantro G1 decoder is able to enable a post-processor on the decoding pipeline, which can be used to perform scaling and color conversion.

The post-processor is integrated to the decoder, and it's possible to use it in a way that is completely transparent to the user.

This commit enables color conversion via post-processing, which means the driver now exposes YUV packed and RGB pixel formats, in addition to NV12.

On the YUV-to-RGB path, the post-processing pipeline allows to modify the image contrast, brigthness and saturation, so additional user controls are added to expose them.

---
 drivers/staging/media/hantro/Makefile         |   1 +
 drivers/staging/media/hantro/hantro.h         |  23 +-
 drivers/staging/media/hantro/hantro_drv.c     |  24 +-
 .../staging/media/hantro/hantro_g1_h264_dec.c |   2 +-
 .../media/hantro/hantro_g1_mpeg2_dec.c        |   3 +-
 .../staging/media/hantro/hantro_g1_vp8_dec.c  |   2 +-
 drivers/staging/media/hantro/hantro_h264.c    |   7 +-
 drivers/staging/media/hantro/hantro_hw.h      |  11 +
 .../staging/media/hantro/hantro_postproc.c    | 316 ++++++++++++++++++
 drivers/staging/media/hantro/hantro_v4l2.c    |  21 +-
 drivers/staging/media/hantro/rk3288_vpu_hw.c  |  21 ++
 11 files changed, 420 insertions(+), 11 deletions(-)
 create mode 100644 drivers/staging/media/hantro/hantro_postproc.c
drivers/staging/media/hantro/Makefile +1 -0
index 5d6b0383d280..496b30c3c396 100644
@@ -3,6 +3,7 @@ obj-$(CONFIG_VIDEO_HANTRO) += hantro-vpu.o
 hantro-vpu-y += \
 		hantro_drv.o \
 		hantro_v4l2.o \
+		hantro_postproc.o \
 		hantro_h1_jpeg_enc.o \
 		hantro_g1_h264_dec.o \
 		hantro_g1_mpeg2_dec.o \
drivers/staging/media/hantro/hantro.h +22 -1
index e8872f24e351..8446a1fa9ab9 100644
@@ -237,6 +237,7 @@ struct hantro_ctx {
 			  unsigned int bytesused);
 
 	const struct hantro_codec_ops *codec_ops;
+	struct hantro_postproc_ctx postproc;
 
 	/* Specific for particular codec modes. */
 	union {
@@ -250,7 +251,8 @@ struct hantro_ctx {
 /**
  * struct hantro_fmt - information about supported video formats.
  * @name:	Human readable name of the format.
- * @fourcc:	FourCC code of the format. See V4L2_PIX_FMT_*.
+ * @fourcc:	FourCC code of the post-processed format. See V4L2_PIX_FMT_*.
+ * @dec_fourcc:	FourCC code of the native format. See V4L2_PIX_FMT_*.
  * @codec_mode:	Codec mode related to this format. See
  *		enum hantro_codec_mode.
  * @header_size: Optional header size. Currently used by JPEG encoder.
@@ -261,6 +263,7 @@ struct hantro_ctx {
 struct hantro_fmt {
 	char *name;
 	u32 fourcc;
+	u32 dec_fourcc;
 	enum hantro_codec_mode codec_mode;
 	int header_size;
 	int max_depth;
@@ -387,4 +390,22 @@ hantro_h264_buffer_extra_size(unsigned int width, unsigned int height)
 	return 128 * MB_WIDTH(width) * MB_HEIGHT(height);
 }
 
+static inline bool
+hantro_use_postproc(struct hantro_ctx *ctx)
+{
+	return ctx->vpu_dst_fmt->fourcc != ctx->vpu_dst_fmt->dec_fourcc;
+}
+
+static inline dma_addr_t
+hantro_get_dec_buf_addr(struct hantro_ctx *ctx, struct vb2_buffer *vb)
+{
+	if (hantro_use_postproc(ctx))
+		return ctx->postproc.dec_q[vb->index].dma;
+	return vb2_dma_contig_plane_dma_addr(vb, 0);
+}
+
+void hantro_postproc_setup(struct hantro_ctx *ctx);
+void hantro_postproc_free(struct hantro_ctx *ctx);
+int hantro_postproc_alloc(struct hantro_ctx *ctx);
+
 #endif /* HANTRO_H_ */
drivers/staging/media/hantro/hantro_drv.c +22 -2
index f550b68d46ca..300178562014 100644
@@ -53,7 +53,7 @@ dma_addr_t hantro_get_ref(struct hantro_ctx *ctx, u64 ts)
 	if (index < 0)
 		return 0;
 	buf = vb2_get_buffer(q, index);
-	return vb2_dma_contig_plane_dma_addr(buf, 0);
+	return hantro_get_dec_buf_addr(ctx, buf);
 }
 
 static int
@@ -165,6 +165,9 @@ void hantro_finish_run(struct hantro_ctx *ctx)
 {
 	struct vb2_v4l2_buffer *src_buf;
 
+	if (hantro_use_postproc(ctx))
+		hantro_postproc_setup(ctx);
+
 	src_buf = hantro_get_src_buf(ctx);
 	v4l2_ctrl_request_complete(src_buf->vb2_buf.req_obj.req,
 				   &ctx->ctrl_handler);
@@ -365,8 +368,9 @@ static int hantro_ctrls_setup(struct hantro_dev *vpu,
 			      int allowed_codecs)
 {
 	int i, num_ctrls = ARRAY_SIZE(controls);
+	int postproc_ctrls = (allowed_codecs & HANTRO_DECODERS) ? 3 : 0;
 
-	v4l2_ctrl_handler_init(&ctx->ctrl_handler, num_ctrls);
+	v4l2_ctrl_handler_init(&ctx->ctrl_handler, num_ctrls + postproc_ctrls);
 
 	for (i = 0; i < num_ctrls; i++) {
 		if (!(allowed_codecs & controls[i].codec))
@@ -382,6 +386,22 @@ static int hantro_ctrls_setup(struct hantro_dev *vpu,
 			return ctx->ctrl_handler.error;
 		}
 	}
+
+	/*
+	 * Add post-processing controls.
+	 * Only used if the post-processing path is enabled,
+	 * when the application sets a CAPTURE pixel format
+	 * that requires it.
+	 */
+	if (postproc_ctrls) {
+		v4l2_ctrl_new_std(&ctx->ctrl_handler, NULL,
+				  V4L2_CID_CONTRAST, -64, 64, 1, 0);
+		v4l2_ctrl_new_std(&ctx->ctrl_handler, NULL,
+				  V4L2_CID_BRIGHTNESS, -128, 127, 1, 0);
+		v4l2_ctrl_new_std(&ctx->ctrl_handler, NULL,
+				  V4L2_CID_SATURATION, -64, 128, 1, 0);
+	}
+
 	return v4l2_ctrl_handler_setup(&ctx->ctrl_handler);
 }
 
drivers/staging/media/hantro/hantro_g1_h264_dec.c +1 -1
index 29130946dea4..e263a6b50651 100644
@@ -241,7 +241,7 @@ static void set_buffers(struct hantro_ctx *ctx)
 	vdpu_write_relaxed(vpu, src_dma, G1_REG_ADDR_STR);
 
 	/* Destination (decoded frame) buffer. */
-	dst_dma = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
+	dst_dma = hantro_get_dec_buf_addr(ctx, &dst_buf->vb2_buf);
 	vdpu_write_relaxed(vpu, dst_dma, G1_REG_ADDR_DST);
 
 	/* Higher profiles require DMV buffer appended to reference frames. */
drivers/staging/media/hantro/hantro_g1_mpeg2_dec.c +1 -2
index f3bf67d8a289..63fe89ef21ae 100644
@@ -121,7 +121,7 @@ hantro_g1_mpeg2_dec_set_buffers(struct hantro_dev *vpu, struct hantro_ctx *ctx,
 	vdpu_write_relaxed(vpu, addr, G1_REG_RLC_VLC_BASE);
 
 	/* Destination frame buffer */
-	addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
+	addr = hantro_get_dec_buf_addr(ctx, dst_buf);
 	current_addr = addr;
 
 	if (picture->picture_structure == PICT_BOTTOM_FIELD)
@@ -243,7 +243,6 @@ void hantro_g1_mpeg2_dec_run(struct hantro_ctx *ctx)
 	hantro_g1_mpeg2_dec_set_buffers(vpu, ctx, &src_buf->vb2_buf,
 					&dst_buf->vb2_buf,
 					sequence, picture, slice_params);
-
 	hantro_finish_run(ctx);
 
 	reg = G1_REG_DEC_E(1);
drivers/staging/media/hantro/hantro_g1_vp8_dec.c +1 -1
index cad18094fee0..e708994d1aba 100644
@@ -422,7 +422,7 @@ static void cfg_buffers(struct hantro_ctx *ctx,
 	}
 	vdpu_write_relaxed(vpu, reg, G1_REG_FWD_PIC(0));
 
-	dst_dma = vb2_dma_contig_plane_dma_addr(&vb2_dst->vb2_buf, 0);
+	dst_dma = hantro_get_dec_buf_addr(ctx, &vb2_dst->vb2_buf);
 	vdpu_write_relaxed(vpu, dst_dma, G1_REG_ADDR_DST);
 }
 
drivers/staging/media/hantro/hantro_h264.c +6 -1
index 2227b4e12067..d00b3096b7ae 100644
@@ -13,6 +13,7 @@
 #include <linux/types.h>
 #include <linux/sort.h>
 #include <media/v4l2-mem2mem.h>
+#include <media/v4l2-common.h>
 
 #include "hantro.h"
 #include "hantro_hw.h"
@@ -635,7 +636,11 @@ int hantro_h264_dec_init(struct hantro_ctx *ctx)
 	tbl = priv->cpu;
 	memcpy(tbl->cabac_table, h264_cabac_table, sizeof(tbl->cabac_table));
 
-	v4l2_fill_pixfmt_mp(&pix_mp, ctx->dst_fmt.pixelformat,
+	/*
+	 * For the decoder picture size, we want the decoder
+	 * native pixel format, so we use dec_fourcc here.
+	 */
+	v4l2_fill_pixfmt_mp(&pix_mp, ctx->vpu_dst_fmt->dec_fourcc,
 			    ctx->dst_fmt.width, ctx->dst_fmt.height);
 	h264_dec->pic_size = pix_mp.plane_fmt[0].sizeimage;
 
drivers/staging/media/hantro/hantro_hw.h +11 -0
index 69b88f4d3fb3..ae1d869e7c28 100644
@@ -28,11 +28,13 @@ struct hantro_variant;
  * @cpu:	CPU pointer to the buffer.
  * @dma:	DMA address of the buffer.
  * @size:	Size of the buffer.
+ * @attrs:	Attributes of the DMA mapping.
  */
 struct hantro_aux_buf {
 	void *cpu;
 	dma_addr_t dma;
 	size_t size;
+	unsigned long attrs;
 };
 
 /**
@@ -109,6 +111,15 @@ struct hantro_vp8_dec_hw_ctx {
 	struct hantro_aux_buf prob_tbl;
 };
 
+/**
+ * struct hantro_postproc_ctx
+ *
+ * @dec_q:		References buffers, in decoder format.
+ */
+struct hantro_postproc_ctx {
+	struct hantro_aux_buf dec_q[VB2_MAX_FRAME];
+};
+
 /**
  * struct hantro_codec_ops - codec mode specific operations
  *
drivers/staging/media/hantro/hantro_postproc.c new file +235 -0
new file mode 100644
index 000000000000..17d023a253a8
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hantro G1 post-processor support
+ *
+ * Copyright (C) 2019 Collabora, Ltd.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/types.h>
+
+#include "hantro.h"
+#include "hantro_hw.h"
+
+#define G1_SWREG(nr)		((nr) * 4)
+
+#define G1_REG_PP_INTERRUPT		G1_SWREG(60)
+#define    G1_REG_PP_READY_IRQ		BIT(12)
+#define    G1_REG_PP_IRQ		BIT(8)
+#define    G1_REG_PP_IRQ_DIS		BIT(4)
+#define    G1_REG_PP_PIPELINE_EN	BIT(1)
+#define    G1_REG_PP_EXTERNAL_TRIGGER	BIT(0)
+#define G1_REG_PP_DEV_CONFIG		G1_SWREG(61)
+#define     G1_REG_PP_AXI_RD_ID(v)	(((v) << 24) & GENMASK(31, 24))
+#define     G1_REG_PP_AXI_WR_ID(v)	(((v) << 16) & GENMASK(23, 16))
+#define     G1_REG_PP_INSWAP32_E(v)	((v) ? BIT(10) : 0)
+#define     G1_REG_PP_DATA_DISC_E(v)	((v) ? BIT(9) : 0)
+#define     G1_REG_PP_CLK_GATE_E(v)	((v) ? BIT(8) : 0)
+#define     G1_REG_PP_IN_ENDIAN(v)	((v) ? BIT(7) : 0)
+#define     G1_REG_PP_OUT_ENDIAN(v)	((v) ? BIT(6) : 0)
+#define     G1_REG_PP_OUTSWAP32_E(v)	((v) ? BIT(5) : 0)
+#define     G1_REG_PP_MAX_BURST(v)	(((v) << 0) & GENMASK(4, 0))
+#define G1_REG_PP_IN_LUMA_BASE		G1_SWREG(63)
+#define G1_REG_PP_IN_CB_BASE		G1_SWREG(64)
+#define G1_REG_PP_IN_CR_BASE		G1_SWREG(65)
+#define G1_REG_PP_OUT_LUMA_BASE		G1_SWREG(66)
+#define G1_REG_PP_OUT_CHROMA_BASE	G1_SWREG(67)
+#define G1_REG_PP_CONTRAST_ADJUST	G1_SWREG(68)
+#define G1_REG_PP_COLOR_CONVERSION	G1_SWREG(69)
+#define G1_REG_PP_COLOR_CONVERSION0	G1_SWREG(70)
+#define G1_REG_PP_COLOR_CONVERSION1	G1_SWREG(71)
+#define G1_REG_PP_INPUT_SIZE		G1_SWREG(72)
+#define    G1_REG_PP_INPUT_SIZE_HEIGHT(v) (((v) << 9) & GENMASK(16, 9))
+#define    G1_REG_PP_INPUT_SIZE_WIDTH(v)  (((v) << 0) & GENMASK(8, 0))
+#define G1_REG_PP_SCALING0		G1_SWREG(79)
+#define     G1_REG_PP_PADD_R(v)	(((v) << 23) & GENMASK(27, 23))
+#define     G1_REG_PP_PADD_G(v)	(((v) << 18) & GENMASK(22, 18))
+#define     G1_REG_PP_RANGEMAP_Y(v) ((v) ? BIT(31) : 0)
+#define     G1_REG_PP_RANGEMAP_C(v) ((v) ? BIT(30) : 0)
+#define     G1_REG_PP_YCBCR_RANGE(v) ((v) ? BIT(29) : 0)
+#define     G1_REG_PP_RGB_16(v) ((v) ? BIT(28) : 0)
+#define G1_REG_PP_SCALING1		G1_SWREG(80)
+#define     G1_REG_PP_PADD_B(v)	(((v) << 18) & GENMASK(22, 18))
+#define G1_REG_PP_MASK_R		G1_SWREG(82)
+#define G1_REG_PP_MASK_G		G1_SWREG(83)
+#define G1_REG_PP_MASK_B		G1_SWREG(84)
+#define G1_REG_PP_CONTROL		G1_SWREG(85)
+#define     G1_REG_PP_CONTROL_IN_FMT(v)	(((v) << 29) & GENMASK(31, 29))
+#define     G1_REG_PP_CONTROL_OUT_FMT(v) (((v) << 26) & GENMASK(28, 26))
+#define     G1_REG_PP_CONTROL_OUT_HEIGHT(v) (((v) << 15) & GENMASK(25, 15))
+#define     G1_REG_PP_CONTROL_OUT_WIDTH(v) (((v) << 4) & GENMASK(14, 4))
+#define G1_REG_PP_MASK1_ORIG_WIDTH	G1_SWREG(88)
+#define     G1_REG_PP_ORIG_WIDTH(v)	(((v) << 23) & GENMASK(31, 23))
+#define G1_REG_PP_DISPLAY_WIDTH		G1_SWREG(92)
+#define G1_REG_PP_FUSE			G1_SWREG(99)
+
+#define VPU_PP_IN_YUYV			0x0
+#define VPU_PP_IN_NV12			0x1
+#define VPU_PP_IN_YUV420		0x2
+#define VPU_PP_IN_YUV240_TILED		0x5
+#define VPU_PP_OUT_RGB			0x0
+#define VPU_PP_OUT_YUYV			0x3
+
+#define DEF_COLOR_COEFF_A 298
+#define DEF_COLOR_COEFF_B 409
+#define DEF_COLOR_COEFF_C 208
+#define DEF_COLOR_COEFF_D 100
+#define DEF_COLOR_COEFF_E 516
+
+static const struct hantro_reg reg_color_a2 = { G1_REG_PP_COLOR_CONVERSION, 18, 0x3ff };
+static const struct hantro_reg reg_color_a1 = { G1_REG_PP_COLOR_CONVERSION, 8, 0x3ff };
+static const struct hantro_reg reg_color_b = { G1_REG_PP_COLOR_CONVERSION0, 0, 0x3ff };
+static const struct hantro_reg reg_color_c = { G1_REG_PP_COLOR_CONVERSION0, 10, 0x3ff };
+static const struct hantro_reg reg_color_d = { G1_REG_PP_COLOR_CONVERSION0, 20, 0x3ff };
+static const struct hantro_reg reg_color_e = { G1_REG_PP_COLOR_CONVERSION1, 0, 0x3ff };
+static const struct hantro_reg reg_color_f = { G1_REG_PP_COLOR_CONVERSION1, 10, 0xff };
+static const struct hantro_reg reg_contrast_thr1 = { G1_REG_PP_CONTRAST_ADJUST, 24, 0xff };
+static const struct hantro_reg reg_contrast_thr2 = { G1_REG_PP_COLOR_CONVERSION, 0, 0xff };
+static const struct hantro_reg reg_contrast_off1 = { G1_REG_PP_CONTRAST_ADJUST, 0, 0x3ff };
+static const struct hantro_reg reg_contrast_off2 = { G1_REG_PP_CONTRAST_ADJUST, 10, 0x3ff };
+static const struct hantro_reg reg_ycbcr_range = { G1_REG_PP_SCALING0, 29, 0x1 };
+static const struct hantro_reg reg_pad_r = { G1_REG_PP_SCALING0, 23, 0x1f };
+static const struct hantro_reg reg_pad_g = { G1_REG_PP_SCALING0, 18, 0x1f };
+static const struct hantro_reg reg_pad_b = { G1_REG_PP_SCALING1, 18, 0x1f };
+
+static s32 hantro_postproc_get_ctrl(struct hantro_ctx *ctx, u32 id, s32 def_val)
+{
+	struct v4l2_ctrl *ctrl;
+
+	ctrl = v4l2_ctrl_find(&ctx->ctrl_handler, id);
+	if (!ctrl)
+		return def_val;
+	return v4l2_ctrl_g_ctrl(ctrl);
+}
+
+static void hantro_postproc_setup_rgb(struct hantro_ctx *ctx)
+{
+	struct hantro_dev *vpu = ctx->dev;
+	s32 thr1y, thr2y;
+	s32 thr1, thr2;
+	s32 off1, off2;
+	s32 a1, a2;
+	s32 tmp, satur;
+	s32 contrast, saturation, brightness;
+
+	contrast = hantro_postproc_get_ctrl(ctx, V4L2_CID_CONTRAST, 0);
+	brightness = hantro_postproc_get_ctrl(ctx, V4L2_CID_BRIGHTNESS, 0);
+	saturation = hantro_postproc_get_ctrl(ctx, V4L2_CID_SATURATION, 0);
+
+	if (ctx->src_fmt.quantization == V4L2_QUANTIZATION_LIM_RANGE) {
+		s32 tmp1, tmp2;
+
+		thr1 = (219 * (contrast + 128)) / 512;
+		thr1y = (219 - 2 * thr1) / 2;
+		thr2 = 219 - thr1;
+		thr2y = 219 - thr1y;
+
+		tmp1 = (thr1y * 256) / thr1;
+		tmp2 = ((thr2y - thr1y) * 256) / (thr2 - thr1);
+		off1 = ((thr1y - ((tmp2 * thr1) / 256)) * (s32)DEF_COLOR_COEFF_A) / 256;
+		off2 = ((thr2y - ((tmp1 * thr2) / 256)) * (s32)DEF_COLOR_COEFF_A) / 256;
+
+		tmp1 = (64 * (contrast + 128)) / 128;
+		tmp2 = 256 * (128 - tmp1);
+		a1 = (tmp2 + off2) / thr1;
+		a2 = a1 + (256 * (off2 - 1)) / (thr2 - thr1);
+	} else {
+		thr1 = (64 * (contrast + 128)) / 128;
+		thr1y = 128 - thr1;
+		thr2 = 256 - thr1;
+		thr2y = 256 - thr1y;
+		a1 = (thr1y * 256) / thr1;
+		a2 = ((thr2y - thr1y) * 256) / (thr2 - thr1);
+		off1 = thr1y - (a2 * thr1) / 256;
+		off2 = thr2y - (a1 * thr2) / 256;
+	}
+
+	a1 = clamp(a1, 0, 1023);
+	a2 = clamp(a2, 0, 1023);
+	thr1 = clamp(thr1, 0, 255);
+	thr2 = clamp(thr2, 0, 255);
+	off1 = clamp(off1, -512, 511);
+	off2 = clamp(off2, -512, 511);
+
+	hantro_reg_write(vpu, &reg_contrast_thr1, thr1);
+	hantro_reg_write(vpu, &reg_contrast_thr2, thr2);
+	hantro_reg_write(vpu, &reg_contrast_off1, off1);
+	hantro_reg_write(vpu, &reg_contrast_off2, off2);
+	hantro_reg_write(vpu, &reg_color_a1, a1);
+	hantro_reg_write(vpu, &reg_color_a2, a2);
+
+	/* Brightness */
+	hantro_reg_write(vpu, &reg_color_f, brightness);
+
+	/* Saturation */
+	satur = 64 + saturation;
+	tmp = (satur * (s32)DEF_COLOR_COEFF_B) / 64;
+	tmp = clamp(tmp, 0, 1023);
+	hantro_reg_write(vpu, &reg_color_b, tmp);
+
+	tmp = (satur * (s32)DEF_COLOR_COEFF_C) / 64;
+	tmp = clamp(tmp, 0, 1023);
+	hantro_reg_write(vpu, &reg_color_c, tmp);
+
+	tmp = (satur * (s32)DEF_COLOR_COEFF_D) / 64;
+	tmp = clamp(tmp, 0, 1023);
+	hantro_reg_write(vpu, &reg_color_d, tmp);
+
+	tmp = (satur * (s32)DEF_COLOR_COEFF_E) / 64;
+	tmp = clamp(tmp, 0, 1023);
+	hantro_reg_write(vpu, &reg_color_e, tmp);
+
+	/* Set RGB padding and mask */
+	switch (ctx->vpu_dst_fmt->fourcc) {
+	case V4L2_PIX_FMT_RGBX32:
+		hantro_reg_write(vpu, &reg_pad_r, 0);
+		hantro_reg_write(vpu, &reg_pad_g, 8);
+		hantro_reg_write(vpu, &reg_pad_b, 16);
+
+		vdpu_write_relaxed(vpu, 0xff000000, G1_REG_PP_MASK_R);
+		vdpu_write_relaxed(vpu, 0x00ff0000, G1_REG_PP_MASK_G);
+		vdpu_write_relaxed(vpu, 0x0000ff00, G1_REG_PP_MASK_B);
+		break;
+	case V4L2_PIX_FMT_XRGB32:
+		hantro_reg_write(vpu, &reg_pad_r, 8);
+		hantro_reg_write(vpu, &reg_pad_g, 16);
+		hantro_reg_write(vpu, &reg_pad_b, 24);
+
+		vdpu_write_relaxed(vpu, 0x00ff0000, G1_REG_PP_MASK_R);
+		vdpu_write_relaxed(vpu, 0x0000ff00, G1_REG_PP_MASK_G);
+		vdpu_write_relaxed(vpu, 0x000000ff, G1_REG_PP_MASK_B);
+		break;
+	case V4L2_PIX_FMT_XBGR32:
+		hantro_reg_write(vpu, &reg_pad_b, 0);
+		hantro_reg_write(vpu, &reg_pad_g, 8);
+		hantro_reg_write(vpu, &reg_pad_r, 16);
+
+		vdpu_write_relaxed(vpu, 0xff000000, G1_REG_PP_MASK_B);
+		vdpu_write_relaxed(vpu, 0x00ff0000, G1_REG_PP_MASK_G);
+		vdpu_write_relaxed(vpu, 0x0000ff00, G1_REG_PP_MASK_R);
+		break;
+	}
+}
+
+void hantro_postproc_setup(struct hantro_ctx *ctx)
+{
+	struct hantro_dev *vpu = ctx->dev;
+	struct vb2_v4l2_buffer *dst_buf;
+	u32 reg, src_pp_fmt, dst_pp_fmt;
+	dma_addr_t dst_dma;
+
+	/* Turn on pipeline mode. Must be done first. */
+	vdpu_write(vpu, G1_REG_PP_PIPELINE_EN, G1_REG_PP_INTERRUPT);
+
+	reg = G1_REG_PP_AXI_RD_ID(0) |
+	      G1_REG_PP_AXI_WR_ID(0) |
+	      G1_REG_PP_INSWAP32_E(1) |
+	      G1_REG_PP_OUTSWAP32_E(1) |
+	      G1_REG_PP_DATA_DISC_E(0) |
+	      G1_REG_PP_CLK_GATE_E(1) |
+	      G1_REG_PP_IN_ENDIAN(1) |
+	      G1_REG_PP_OUT_ENDIAN(1) |
+	      G1_REG_PP_MAX_BURST(16);
+	vdpu_write_relaxed(vpu, reg, G1_REG_PP_DEV_CONFIG);
+
+	/* Configure picture resolution. */

drivers/staging/media/hantro/hantro_postproc.c line 245

Quoted 10 lines
drivers/staging/media/hantro/hantro_postproc.c new file +10 -0
+	reg = G1_REG_PP_INPUT_SIZE_HEIGHT(MB_HEIGHT(ctx->dst_fmt.height)) |
+	      G1_REG_PP_INPUT_SIZE_WIDTH(MB_WIDTH(ctx->dst_fmt.width));
+	vdpu_write_relaxed(vpu, reg, G1_REG_PP_INPUT_SIZE);
+
+	dst_buf = v4l2_m2m_next_dst_buf(ctx->fh.m2m_ctx);
+	dst_dma = vb2_dma_contig_plane_dma_addr(&dst_buf->vb2_buf, 0);
+	vdpu_write_relaxed(vpu, dst_dma, G1_REG_PP_OUT_LUMA_BASE);
+
+	reg = (ctx->dst_fmt.quantization ==
+	       V4L2_QUANTIZATION_LIM_RANGE) ? 0 : 1;

Why dst_fmt? Userspace cannot set the quantization range of the capture format, it's either copied from the source format or explicitly set in the driver.

I see this code in vidioc_s_fmt_cap_mplane():

        /* Colorimetry information are always propagated. */
        ctx->src_fmt.colorspace = pix_mp->colorspace;
        ctx->src_fmt.ycbcr_enc = pix_mp->ycbcr_enc;
        ctx->src_fmt.xfer_func = pix_mp->xfer_func;
        ctx->src_fmt.quantization = pix_mp->quantization;
Quoted 8 lines

I think this is wrong.

If I am not mistaken, userspace has parsed this information from the bytestream and should pass it to the driver when it calls S_FMT for the output queue. Please correct me if I am wrong. But this information has to come from somewhere.

These values should be propagated to the capture queue.

Yes, I think you are right here.

Quoted 5 lines

Adding YUV to RGB conversion changes this: in that case you want to convert to full range RGB. So both ycbcr_enc and quantization can be set to the DEFAULT value for the RGB capture format. The colorspace and xfer_func values are copied as before since those are not converted by the post-processing step.

Right, that makes sense.

Thanks for the feedback,
Ezequiel

#11 lore raw
In reply to Ezequiel Garcia

Hi Ezequiel,

Quoted 15 lines · Ezequiel Garcia

Hi all,

This series enables the post-processor support available on the Hantro G1 VPU. The post-processor block can be pipelined with the decoder hardware, allowing to perform operations such as color conversion, scaling, rotation, cropping, among others.

The decoder hardware needs its own set of NV12 buffers (the native decoder format), and the post-processor is the owner of the CAPTURE buffers. This allows the application get processed (scaled, converted, etc) buffers, completely transparently.

Quoted 4 lines

This feature is implemented by exposing other CAPTURE pixel formats to the application (ENUM_FMT). When the application sets a pixel format other than NV12, the driver will enable and use the post-processor transparently.

I'll try to review the series a bit later, but a general comment here is that the userspace wouldn't have a way to distinguish between the native and post-processed formats. I'm pretty much sure that post-processing at least imposes some power penalty, so it would be good if the userspace could avoid it if unnecessary.

Best regards,
Tomasz

#12 lore raw
Quoted 22 lines · Tomasz Figa

Hi Ezequiel,

Quoted 14 lines · Ezequiel Garcia

Hi all,

This series enables the post-processor support available on the Hantro G1 VPU. The post-processor block can be pipelined with the decoder hardware, allowing to perform operations such as color conversion, scaling, rotation, cropping, among others.

The decoder hardware needs its own set of NV12 buffers (the native decoder format), and the post-processor is the owner of the CAPTURE buffers. This allows the application get processed (scaled, converted, etc) buffers, completely transparently.

Quoted 4 lines

This feature is implemented by exposing other CAPTURE pixel formats to the application (ENUM_FMT). When the application sets a pixel format other than NV12, the driver will enable and use the post-processor transparently.

Quoted 6 lines

I'll try to review the series a bit later, but a general comment here is that the userspace wouldn't have a way to distinguish between the native and post-processed formats. I'm pretty much sure that post-processing at least imposes some power penalty, so it would be good if the userspace could avoid it if unnecessary.

Hm, that's true, good catch.

So, it would be desirable to retain the current behavior of allowing the application to just set a different pixel format and get a post-processed frame, transparently.

But at the same time, it would be nice if the application is somehow aware of the post-processing happening. Maybe we can expose a more accurate media controller topology, have applications enable the post-processing pipeline explicitly.

Thanks for the feedback,
Ezequiel

#13 lore raw
Quoted 32 lines · Ezequiel Garcia
Quoted 22 lines · Tomasz Figa

Hi Ezequiel,

Quoted 14 lines · Ezequiel Garcia

Hi all,

This series enables the post-processor support available on the Hantro G1 VPU. The post-processor block can be pipelined with the decoder hardware, allowing to perform operations such as color conversion, scaling, rotation, cropping, among others.

The decoder hardware needs its own set of NV12 buffers (the native decoder format), and the post-processor is the owner of the CAPTURE buffers. This allows the application get processed (scaled, converted, etc) buffers, completely transparently.

Quoted 4 lines

This feature is implemented by exposing other CAPTURE pixel formats to the application (ENUM_FMT). When the application sets a pixel format other than NV12, the driver will enable and use the post-processor transparently.

Quoted 6 lines

I'll try to review the series a bit later, but a general comment here is that the userspace wouldn't have a way to distinguish between the native and post-processed formats. I'm pretty much sure that post-processing at least imposes some power penalty, so it would be good if the userspace could avoid it if unnecessary.

Hm, that's true, good catch.

Quoted 8 lines

So, it would be desirable to retain the current behavior of allowing the application to just set a different pixel format and get a post-processed frame, transparently.

But at the same time, it would be nice if the application is somehow aware of the post-processing happening. Maybe we can expose a more accurate media controller topology, have applications enable the post-processing pipeline explicitly.

How it works on the stateful side is that userspace set the encoding type (the codec), then passes a header (in our case, there will be parsed structures replacing this) first. The driver then configure capture format, giving a hint of the "default" or "native" format. This may or may not be sufficient, but it does work in giving userspace a hint.

Quoted 4 lines

Thanks for the feedback,
Ezequiel

_______________________________________________
Linux-rockchip mailing list [email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

#14 lore raw
In reply to Ezequiel Garcia
Quoted 32 lines · Ezequiel Garcia
Quoted 22 lines · Tomasz Figa

Hi Ezequiel,

Quoted 14 lines · Ezequiel Garcia

Hi all,

This series enables the post-processor support available on the Hantro G1 VPU. The post-processor block can be pipelined with the decoder hardware, allowing to perform operations such as color conversion, scaling, rotation, cropping, among others.

The decoder hardware needs its own set of NV12 buffers (the native decoder format), and the post-processor is the owner of the CAPTURE buffers. This allows the application get processed (scaled, converted, etc) buffers, completely transparently.

Quoted 4 lines

This feature is implemented by exposing other CAPTURE pixel formats to the application (ENUM_FMT). When the application sets a pixel format other than NV12, the driver will enable and use the post-processor transparently.

Quoted 6 lines

I'll try to review the series a bit later, but a general comment here is that the userspace wouldn't have a way to distinguish between the native and post-processed formats. I'm pretty much sure that post-processing at least imposes some power penalty, so it would be good if the userspace could avoid it if unnecessary.

Hm, that's true, good catch.

Quoted 8 lines

So, it would be desirable to retain the current behavior of allowing the application to just set a different pixel format and get a post-processed frame, transparently.

But at the same time, it would be nice if the application is somehow aware of the post-processing happening. Maybe we can expose a more accurate media controller topology, have applications enable the post-processing pipeline explicitly.

How it works on the stateful side is that userspace set the encoding type (the codec), then passes a header (in our case, there will be parsed structures replacing this) first. The driver then configure capture format, giving a hint of the "default" or "native" format. This may or may not be sufficient, but it does work in giving userspace a hint.

Quoted 4 lines

Thanks for the feedback,
Ezequiel

_______________________________________________
Linux-rockchip mailing list [email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

#15 lore raw
Quoted 43 lines · Nicolas Dufresne
Quoted 32 lines · Ezequiel Garcia
Quoted 22 lines · Tomasz Figa

Hi Ezequiel,

Quoted 14 lines · Ezequiel Garcia

Hi all,

This series enables the post-processor support available on the Hantro G1 VPU. The post-processor block can be pipelined with the decoder hardware, allowing to perform operations such as color conversion, scaling, rotation, cropping, among others.

The decoder hardware needs its own set of NV12 buffers (the native decoder format), and the post-processor is the owner of the CAPTURE buffers. This allows the application get processed (scaled, converted, etc) buffers, completely transparently.

Quoted 4 lines

This feature is implemented by exposing other CAPTURE pixel formats to the application (ENUM_FMT). When the application sets a pixel format other than NV12, the driver will enable and use the post-processor transparently.

Quoted 6 lines

I'll try to review the series a bit later, but a general comment here is that the userspace wouldn't have a way to distinguish between the native and post-processed formats. I'm pretty much sure that post-processing at least imposes some power penalty, so it would be good if the userspace could avoid it if unnecessary.

Hm, that's true, good catch.

Quoted 8 lines

So, it would be desirable to retain the current behavior of allowing the application to just set a different pixel format and get a post-processed frame, transparently.

But at the same time, it would be nice if the application is somehow aware of the post-processing happening. Maybe we can expose a more accurate media controller topology, have applications enable the post-processing pipeline explicitly.

Quoted 6 lines

How it works on the stateful side is that userspace set the encoding type (the codec), then passes a header (in our case, there will be parsed structures replacing this) first. The driver then configure capture format, giving a hint of the "default" or "native" format. This may or may not be sufficient, but it does work in giving userspace a hint.

The bad side of that is that we can't handle more than 1 native format.

For the most backwards-compatible behavior, sorting the results of ENUM_FMT according to format preference would allow the applications that choose the first format returned that works for them to choose the best one.

For a further improvement, an ENUM_FMT flag that tells the userspace that a format is preferred could work.

That said, modelling the pipeline appropriately using the media controller is the idea I like the most, because it's the most comprehensive solution. That would have to be well specified and documented, though, and sounds like a long term effort.

Best regards,
Tomasz

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

#16 lore raw
Quoted 57 lines · Tomasz Figa
Quoted 42 lines · Nicolas Dufresne
Quoted 32 lines · Ezequiel Garcia
Quoted 22 lines · Tomasz Figa

Hi Ezequiel,

Quoted 14 lines · Ezequiel Garcia

Hi all,

This series enables the post-processor support available on the Hantro G1 VPU. The post-processor block can be pipelined with the decoder hardware, allowing to perform operations such as color conversion, scaling, rotation, cropping, among others.

The decoder hardware needs its own set of NV12 buffers (the native decoder format), and the post-processor is the owner of the CAPTURE buffers. This allows the application get processed (scaled, converted, etc) buffers, completely transparently.

Quoted 4 lines

This feature is implemented by exposing other CAPTURE pixel formats to the application (ENUM_FMT). When the application sets a pixel format other than NV12, the driver will enable and use the post-processor transparently.

Quoted 6 lines

I'll try to review the series a bit later, but a general comment here is that the userspace wouldn't have a way to distinguish between the native and post-processed formats. I'm pretty much sure that post-processing at least imposes some power penalty, so it would be good if the userspace could avoid it if unnecessary.

Hm, that's true, good catch.

Quoted 8 lines

So, it would be desirable to retain the current behavior of allowing the application to just set a different pixel format and get a post-processed frame, transparently.

But at the same time, it would be nice if the application is somehow aware of the post-processing happening. Maybe we can expose a more accurate media controller topology, have applications enable the post-processing pipeline explicitly.

Quoted 6 lines

How it works on the stateful side is that userspace set the encoding type (the codec), then passes a header (in our case, there will be parsed structures replacing this) first. The driver then configure capture format, giving a hint of the "default" or "native" format. This may or may not be sufficient, but it does work in giving userspace a hint.

The bad side of that is that we can't handle more than 1 native format.

For the most backwards-compatible behavior, sorting the results of ENUM_FMT according to format preference would allow the applications that choose the first format returned that works for them to choose the best one.

Quoted 8 lines

For a further improvement, an ENUM_FMT flag that tells the userspace that a format is preferred could work.

That said, modelling the pipeline appropriately using the media controller is the idea I like the most, because it's the most comprehensive solution. That would have to be well specified and documented, though, and sounds like a long term effort.

Completely agreed.

Thanks,
Ezequiel

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip

#17 lore raw

Hello,

Quoted 58 lines · Ezequiel Garcia
Quoted 57 lines · Tomasz Figa
Quoted 42 lines · Nicolas Dufresne
Quoted 32 lines · Ezequiel Garcia
Quoted 22 lines · Tomasz Figa

Hi Ezequiel,

Quoted 14 lines · Ezequiel Garcia

Hi all,

This series enables the post-processor support available on the Hantro G1 VPU. The post-processor block can be pipelined with the decoder hardware, allowing to perform operations such as color conversion, scaling, rotation, cropping, among others.

The decoder hardware needs its own set of NV12 buffers (the native decoder format), and the post-processor is the owner of the CAPTURE buffers. This allows the application get processed (scaled, converted, etc) buffers, completely transparently.

Quoted 4 lines

This feature is implemented by exposing other CAPTURE pixel formats to the application (ENUM_FMT). When the application sets a pixel format other than NV12, the driver will enable and use the post-processor transparently.

Quoted 6 lines

I'll try to review the series a bit later, but a general comment here is that the userspace wouldn't have a way to distinguish between the native and post-processed formats. I'm pretty much sure that post-processing at least imposes some power penalty, so it would be good if the userspace could avoid it if unnecessary.

Hm, that's true, good catch.

Quoted 8 lines

So, it would be desirable to retain the current behavior of allowing the application to just set a different pixel format and get a post-processed frame, transparently.

But at the same time, it would be nice if the application is somehow aware of the post-processing happening. Maybe we can expose a more accurate media controller topology, have applications enable the post-processing pipeline explicitly.

Quoted 6 lines

How it works on the stateful side is that userspace set the encoding type (the codec), then passes a header (in our case, there will be parsed structures replacing this) first. The driver then configure capture format, giving a hint of the "default" or "native" format. This may or may not be sufficient, but it does work in giving userspace a hint.

The bad side of that is that we can't handle more than 1 native format.

For the most backwards-compatible behavior, sorting the results of ENUM_FMT according to format preference would allow the applications that choose the first format returned that works for them to choose the best one.

Quoted 8 lines
Quoted 8 lines

For a further improvement, an ENUM_FMT flag that tells the userspace that a format is preferred could work.

That said, modelling the pipeline appropriately using the media controller is the idea I like the most, because it's the most comprehensive solution. That would have to be well specified and documented, though, and sounds like a long term effort.

I was playing with vimc to emulate this topology.

What I would suggest is a topology like this:

Device topology
- entity 1: Decoder (2 pads, 3 links)

            type V4L2 subdev subtype Unknown flags 0
        pad0: Sink
                <- "M2M Video Node":1 [ENABLED]
        pad1: Source
                -> "M2M Video Node":0 [ENABLED]
                -> "PostProc":0 []

- entity 4: PostProc (2 pads, 2 links)

            type V4L2 subdev subtype Unknown flags 0
        pad0: Sink
                <- "Decoder":1 []
        pad1: Source
                -> "M2M Video Node":0 []

- entity 7: M2M Video Node (2 pads, 3 links)

            type Node subtype V4L flags 0
            device node name /dev/video0
        pad0: Sink
                <- "Decoder":1 [ENABLED]
                <- "PostProc":1 []
        pad1: Source
                -> "Decoder":0 [ENABLED]

Dot file:
---------

digraph board {
	rankdir=TB
	n00000001 [label="{{<port0> 0} | Decoder\n | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
	n00000001:port1 -> n00000007
	n00000001:port1 -> n00000004:port0 [style=dashed]
	n00000004 [label="{{<port0> 0} | PostProc\n | {<port1> 1}}", shape=Mrecord, style=filled, fillcolor=green]
	n00000004:port1 -> n00000007 [style=dashed]
	n00000007 [label="M2M Video Node\n/dev/video0", shape=box, style=filled, fillcolor=yellow]
	n00000007 -> n00000001:port0
}

Also, as you mentioned in patch 4:

Quoted 3 lines

On the YUV-to-RGB path, the post-processing pipeline allows to modify the image contrast, brigthness and saturation, so additional user controls are added to expose them.

So I think it would make sense to expose these controls in the post-processor subdev, through a /dev/v4l-subdev0, this avoids having a dynamic set of controls in the video node depending on the path.

You don't even need to implement VIDIOC_{G,S}_FORMAT in the pads (at least v4l2-compliance doesn't complain, it is happy with "Not Supported"). So the post-processor /dev/v4l-subdev0 devnode could be used to expose only these controls, and you don't need to expose a devnode to the Decoder entity above (unless you have another reason).

I hope this helps,
Helen

_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip