nvme: Restart request timers in resetting state
Keith Busch
maintainerPATCH 1/5 nvme: Restart request timers in resetting state
A controller in the resetting state has not yet completed its recovery actions. Don't attempt additional recovery in this state and just restart the timer instead.
--- drivers/nvme/host/rdma.c | 8 ++++++++ drivers/nvme/host/tcp.c | 8 ++++++++ 2 files changed, 16 insertions(+)
drivers/nvme/host/rdma.c +8 -0
@@ -1688,6 +1688,14 @@ nvme_rdma_timeout(struct request *rq, bool reserved)dev_warn (ctrl->ctrl.device,"I/O %d QID %d timeout\n" , rq->tag,nvme_rdma_queue_idx (queue)); +/* +* Restart the timer if a controller reset is already scheduled. Any +* timed out commands would be handled before entering the connecting +* state. +*/ +if (ctrl->ctrl.state ==NVME_CTRL_RESETTING ) +return BLK_EH_RESET_TIMER ; +if (ctrl->ctrl.state !=NVME_CTRL_LIVE ) {/* * Teardown immediately if controller times out while starting
drivers/nvme/host/tcp.c +8 -0
@@ -2044,6 +2044,14 @@ nvme_tcp_timeout(struct request *rq, bool reserved)struct nvme_tcp_ctrl *ctrl = req->queue->ctrl;struct nvme_tcp_cmd_pdu *pdu = req->pdu; +/* +* Restart the timer if a controller reset is already scheduled. Any +* timed out commands would be handled before entering the connecting +* state. +*/ +if (ctrl->ctrl.state ==NVME_CTRL_RESETTING ) +return BLK_EH_RESET_TIMER ; +dev_warn (ctrl->ctrl.device,"queue %d: timeout request %#x type %d\n" ,nvme_tcp_queue_id (req->queue), rq->tag, pdu->hdr.type);
Signature · 7 lines
2.14.5 _______________________________________________ Linux-nvme mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-nvme
Keith Busch
maintainerPATCH 2/5 nvme: Prevent resets during paused states
A paused controller is doing critical internal activation work. Don't allow a reset to occur by setting it to the resetting state, preventing any future reset from occuring during this time.
--- drivers/nvme/host/core.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/nvme/host/core.c +6 -3
@@ -3705,20 +3705,23 @@ static void nvme_fw_act_work(struct work_struct *work) fw_act_timeout = jiffies +msecs_to_jiffies (admin_timeout *1000 ); +if (!nvme_change_ctrl_state (ctrl,NVME_CTRL_RESETTING )) +return ; +nvme_stop_queues (ctrl);while (nvme_ctrl_pp_status (ctrl)) {if (time_after (jiffies, fw_act_timeout)) {dev_warn (ctrl->device,"Fw activation timeout, reset controller\n" ); -nvme_reset_ctrl (ctrl); +if (nvme_change_ctrl_state (ctrl,NVME_CTRL_LIVE )) +nvme_reset_ctrl (ctrl);break ; }msleep (100 ); } -if (ctrl->state !=NVME_CTRL_LIVE ) +if (!nvme_change_ctrl_state (ctrl,NVME_CTRL_LIVE ))return ; -nvme_start_queues (ctrl);/* read FW slot information to clear the AER */ nvme_get_fw_slot_info (ctrl);
Signature · 7 lines
2.14.5 _______________________________________________ Linux-nvme mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-nvme
Sagi Grimberg
maintainerRe: [PATCH 2/5] nvme: Prevent resets during paused states
Quoted 4 lines
A paused controller is doing critical internal activation work. Don't allow a reset to occur by setting it to the resetting state, preventing any future reset from occuring during this time.
Is there a reproducible bug actually being addressed here?
Also, seems a bit "acrobatic" to set the state to RESETTING without really resetting it (and then change it back to LIVE before you do actually resetting it).
Would it make sense to look at nvme_ctrl_pp_status when scheduling a reset in nvme_reset_ctrl? Just a thought..
Quoted 11 lines
Signed-off-by Keith Busch <[email protected]>--- drivers/nvme/host/core.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)drivers/nvme/host/core.c +0
-0@@ -3705,20 +3705,23 @@ static void nvme_fw_act_work(struct work_struct *work) fw_act_timeout = jiffies +
drivers/nvme/host/core.c static void nvme_fw_act_work(struct work_struct *work) · line 3715
Quoted 10 lines
drivers/nvme/host/core.c +3
-0msecs_to_jiffies (admin_timeout *1000 ); +if (!nvme_change_ctrl_state (ctrl,NVME_CTRL_RESETTING )) +return ; +nvme_stop_queues (ctrl);while (nvme_ctrl_pp_status (ctrl)) {if (time_after (jiffies, fw_act_timeout)) {dev_warn (ctrl->device,"Fw activation timeout, reset controller\n" );
Would be good if the print will reflect if it resetting or not..
drivers/nvme/host/core.c static void nvme_fw_act_work(struct work_struct *work) · line 3717
Quoted 3 lines
drivers/nvme/host/core.c +2
-1-nvme_reset_ctrl (ctrl); +if (nvme_change_ctrl_state (ctrl,NVME_CTRL_LIVE )) +nvme_reset_ctrl (ctrl);
How can this state change not succeed? ctrl removal?
drivers/nvme/host/core.c static void nvme_fw_act_work(struct work_struct *work) · line 3724
Quoted 8 lines
drivers/nvme/host/core.c +1
-1break ; }msleep (100 ); } -if (ctrl->state !=NVME_CTRL_LIVE ) +if (!nvme_change_ctrl_state (ctrl,NVME_CTRL_LIVE ))return ;
In what scenario this will not succeed? if the reset did it?
_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
Keith Busch
maintainerRe: [PATCH 2/5] nvme: Prevent resets during paused states
Quoted 6 lines · Sagi Grimberg
Quoted 4 lines
A paused controller is doing critical internal activation work. Don't allow a reset to occur by setting it to the resetting state, preventing any future reset from occuring during this time.
Is there a reproducible bug actually being addressed here?
Yes, IO timeouts happen during CSTS.PP, which is normal, and esaclating such errors to reset the controller while it is activating firmware is not a good idea.
Further, we do not want to a user to manaully trigger a reset (via sysfs or other means), so this properly blocks such actions.
Quoted 3 lines
Also, seems a bit "acrobatic" to set the state to RESETTING without really resetting it (and then change it back to LIVE before you do actually resetting it).
We can think of a CSTS.PP as the device internally resetting itself to activate firmware.
Quoted 2 lines
Would it make sense to look at
nvme_ctrl_pp_statuswhen scheduling a reset innvme_reset_ctrl? Just a thought..
We have to be able to reset if we decide CSTS.PP is stuck, fw activation timeout.
Quoted 23 lines
Quoted 10 lines
Signed-off-by Keith Busch <[email protected]>--- drivers/nvme/host/core.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)drivers/nvme/host/core.c +0
-0drivers/nvme/host/core.c static void nvme_fw_act_work(struct work_struct *work) · line 3714
Quoted 10 lines
drivers/nvme/host/core.c +3
-0@@ -3705,20 +3705,23 @@ static void nvme_fw_act_work(struct work_struct *work) fw_act_timeout = jiffies +msecs_to_jiffies (admin_timeout *1000 ); +if (!nvme_change_ctrl_state (ctrl,NVME_CTRL_RESETTING )) +return ; +nvme_stop_queues (ctrl);while (nvme_ctrl_pp_status (ctrl)) {if (time_after (jiffies, fw_act_timeout)) {dev_warn (ctrl->device,"Fw activation timeout, reset controller\n" );Would be good if the print will reflect if it resetting or not..
Quoted 5 lines
drivers/nvme/host/core.c static void nvme_fw_act_work(struct work_struct *work) · line 3717
Quoted 3 lines
drivers/nvme/host/core.c +2
-1-nvme_reset_ctrl (ctrl); +if (nvme_change_ctrl_state (ctrl,NVME_CTRL_LIVE )) +nvme_reset_ctrl (ctrl);How can this state change not succeed? ctrl removal?
Right, we can't prevent a transition to a deleting state.
Quoted 9 lines
drivers/nvme/host/core.c static void nvme_fw_act_work(struct work_struct *work) · line 3724
Quoted 7 lines
drivers/nvme/host/core.c +1
-1break ; }msleep (100 ); } -if (ctrl->state !=NVME_CTRL_LIVE ) +if (!nvme_change_ctrl_state (ctrl,NVME_CTRL_LIVE ))return ;In what scenario this will not succeed? if the reset did it?
Controller deletion should be the only reason here.
I see now the "break" for a failed activation ought to be a return, so I can fix that if you're okay with the rest.
_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
Sagi Grimberg
maintainerRe: [PATCH 2/5] nvme: Prevent resets during paused states
Quoted 7 lines
Quoted 4 lines
Also, seems a bit "acrobatic" to set the state to RESETTING without really resetting it (and then change it back to LIVE before you do actually resetting it).
We can think of a CSTS.PP as the device internally resetting itself to activate firmware.
Can the reset flush the fw activation work? I'm trying to understand if this state games are the best solution here...
Quoted 5 lines
Quoted 2 lines
Would it make sense to look at
nvme_ctrl_pp_statuswhen scheduling a reset innvme_reset_ctrl? Just a thought..We have to be able to reset if we decide CSTS.PP is stuck, fw activation timeout.
See above.
Quoted 7 lines
Quoted 5 lines
drivers/nvme/host/core.c static void nvme_fw_act_work(struct work_struct *work) · line 3717
Quoted 3 lines
drivers/nvme/host/core.c +2
-1-nvme_reset_ctrl (ctrl); +if (nvme_change_ctrl_state (ctrl,NVME_CTRL_LIVE )) +nvme_reset_ctrl (ctrl);How can this state change not succeed? ctrl removal?
Right, we can't prevent a transition to a deleting state.
_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
Keith Busch
maintainerPATCH 3/5 nvme-pci: Free tagset if no IO queues
In reply to Keith BuschIf a controller becomes degraded after a reset, we will not be able to perform any IO. We currently teardown all previously created request queues and namespaces, but we had been keeping an unusable tagset. Free it after all queues using it have been released.
--- drivers/nvme/host/pci.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/nvme/host/pci.c +9 -2
@@ -2489,14 +2489,20 @@ static void nvme_release_prp_pools(struct nvme_dev *dev)dma_pool_destroy (dev->prp_small_pool); } +static void nvme_free_tagset (struct nvme_dev *dev) +{ +if (dev->tagset.tags) +blk_mq_free_tag_set (&dev->tagset); + dev->ctrl.tagset =NULL ; +} +static void nvme_pci_free_ctrl (struct nvme_ctrl *ctrl) {struct nvme_dev *dev =to_nvme_dev (ctrl);nvme_dbbuf_dma_free (dev);put_device (dev->dev); -if (dev->tagset.tags) -blk_mq_free_tag_set (&dev->tagset); +nvme_free_tagset (dev);if (dev->ctrl.admin_q)blk_put_queue (dev->ctrl.admin_q);kfree (dev->queues);
@@ -2615,6 +2621,7 @@ static void nvme_reset_work(struct work_struct *work)nvme_kill_queues (&dev->ctrl);nvme_remove_namespaces (&dev->ctrl); new_state =NVME_CTRL_ADMIN_ONLY ; +nvme_free_tagset (dev); }else {nvme_start_queues (&dev->ctrl);nvme_wait_freeze (&dev->ctrl);
Signature · 7 lines
2.14.5 _______________________________________________ Linux-nvme mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-nvme
Sagi Grimberg
maintainerRe: [PATCH 3/5] nvme-pci: Free tagset if no IO queues
Quoted 5 lines
If a controller becomes degraded after a reset, we will not be able to perform any IO. We currently teardown all previously created request queues and namespaces, but we had been keeping an unusable tagset. Free it after all queues using it have been released.
Is this a resource thing? or is this causing actual troubles?
_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
Keith Busch
maintainerRe: [PATCH 3/5] nvme-pci: Free tagset if no IO queues
Quoted 7 lines · Sagi Grimberg
Quoted 5 lines
If a controller becomes degraded after a reset, we will not be able to perform any IO. We currently teardown all previously created request queues and namespaces, but we had been keeping an unusable tagset. Free it after all queues using it have been released.
Is this a resource thing? or is this causing actual troubles?
Yes, this is freeing an unusable resource so that we don't need to unbind the driver in order to reclaim it.
I only noticed this though because PATCH 4/5 needs to observe the cleared tagset to operate correctly.
_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
Sagi Grimberg
maintainerRe: [PATCH 3/5] nvme-pci: Free tagset if no IO queues
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
If a controller becomes degraded after a reset, we will not be able to perform any IO. We currently teardown all previously created request queues and namespaces, but we had been keeping an unusable tagset. Free it after all queues using it have been released.
Quoted 7 lines
Quoted 1 line
Is this a resource thing? or is this causing actual troubles?
Yes, this is freeing an unusable resource so that we don't need to unbind the driver in order to reclaim it.
I only noticed this though because PATCH 4/5 needs to observe the cleared tagset to operate correctly.
I think that it would be easier to understand with a cover-letter explaining the steps and why they are taken.
_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
Keith Busch
maintainerPATCH 4/5 nvme: Remove ADMIN_ONLY state
In reply to Keith BuschThe admin only state was intended to fence off actions that don't apply to a non-IO capable controller. The only actual user of this is the scan_work, and pci was the only transport to ever set this state. The consequence of having this state is placing an additional burden on every other action that applies to both live and admin only controllers.
Remove the admin only state and place the admin only burden on the only place that actually cares: scan_work.
This also prepares to make it easier to temporarily pause a LIVE state so that we don't need to remember which state the controller had been in prior to the pause.
--- drivers/nvme/host/core.c | 22 +++------------------- drivers/nvme/host/fabrics.h | 3 +-- drivers/nvme/host/nvme.h | 1 - drivers/nvme/host/pci.c | 21 ++++++--------------- 4 files changed, 10 insertions(+), 37 deletions(-)
drivers/nvme/host/core.c +3 -19
@@ -114,7 +114,7 @@ static void nvme_queue_scan(struct nvme_ctrl *ctrl)/* * Only new queue scan work when admin and IO queues are both alive */ -if (ctrl->state ==NVME_CTRL_LIVE ) +if (ctrl->state ==NVME_CTRL_LIVE && ctrl->tagset)queue_work (nvme_wq, &ctrl->scan_work); }
@@ -135,8 +135,7 @@ int nvme_reset_ctrl_sync(struct nvme_ctrl *ctrl) ret =nvme_reset_ctrl (ctrl);if (!ret) {flush_work (&ctrl->reset_work); -if (ctrl->state !=NVME_CTRL_LIVE && - ctrl->state !=NVME_CTRL_ADMIN_ONLY ) +if (ctrl->state !=NVME_CTRL_LIVE ) ret = -ENETRESET ; }
@@ -313,15 +312,6 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl, old_state = ctrl->state;switch (new_state) { -case NVME_CTRL_ADMIN_ONLY : -switch (old_state) { -case NVME_CTRL_CONNECTING : - changed = true; -/* FALLTHRU */ -default : -break ; - } -break ;case NVME_CTRL_LIVE :switch (old_state) {case NVME_CTRL_NEW :
@@ -337,7 +327,6 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,switch (old_state) {case NVME_CTRL_NEW :case NVME_CTRL_LIVE : -case NVME_CTRL_ADMIN_ONLY : changed = true;/* FALLTHRU */ default :
@@ -357,7 +346,6 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,case NVME_CTRL_DELETING :switch (old_state) {case NVME_CTRL_LIVE : -case NVME_CTRL_ADMIN_ONLY :case NVME_CTRL_RESETTING :case NVME_CTRL_CONNECTING : changed = true;
@@ -2775,7 +2763,6 @@ static int nvme_dev_open(struct inode *inode, struct file *file)switch (ctrl->state) {case NVME_CTRL_LIVE : -case NVME_CTRL_ADMIN_ONLY :break ;default :return -EWOULDBLOCK ;
@@ -3065,7 +3052,6 @@ static ssize_t nvme_sysfs_show_state(struct device *dev,static const char *const state_name[] = { [NVME_CTRL_NEW ] ="new" , [NVME_CTRL_LIVE ] ="live" , - [NVME_CTRL_ADMIN_ONLY ] ="only-admin" , [NVME_CTRL_RESETTING ] ="resetting" , [NVME_CTRL_CONNECTING ] ="connecting" , [NVME_CTRL_DELETING ] ="deleting" ,
@@ -3579,11 +3565,9 @@ static void nvme_scan_work(struct work_struct *work)struct nvme_id_ctrl *id;unsigned nn; -if (ctrl->state !=NVME_CTRL_LIVE ) +if (ctrl->state !=NVME_CTRL_LIVE || !ctrl->tagset)return ; -WARN_ON_ONCE (!ctrl->tagset); -if (test_and_clear_bit (NVME_AER_NOTICE_NS_CHANGED , &ctrl->events)) {dev_info (ctrl->device,"rescanning namespaces.\n" );nvme_clear_changed_ns_log (ctrl);
drivers/nvme/host/fabrics.h +1 -2
@@ -182,8 +182,7 @@ bool nvmf_ip_options_match(struct nvme_ctrl *ctrl,static inline bool nvmf_check_ready (struct nvme_ctrl *ctrl,struct request *rq,bool queue_live) { -if (likely (ctrl->state ==NVME_CTRL_LIVE || - ctrl->state ==NVME_CTRL_ADMIN_ONLY )) +if (likely (ctrl->state ==NVME_CTRL_LIVE ))return true;return __nvmf_check_ready (ctrl, rq, queue_live); }
drivers/nvme/host/nvme.h +0 -1
@@ -156,7 +156,6 @@ static inline u16 nvme_req_qid(struct request *req)enum nvme_ctrl_state {NVME_CTRL_NEW ,NVME_CTRL_LIVE , -NVME_CTRL_ADMIN_ONLY ,/* Only admin queue live */ NVME_CTRL_RESETTING ,NVME_CTRL_CONNECTING ,NVME_CTRL_DELETING ,
drivers/nvme/host/pci.c +6 -15
@@ -2262,10 +2262,7 @@ static bool __nvme_disable_io_queues(struct nvme_dev *dev, u8 opcode)return true; } -/* -* return error value only when tagset allocation failed -*/ -static int nvme_dev_add (struct nvme_dev *dev) +static void nvme_dev_add (struct nvme_dev *dev) {int ret;
@@ -2295,7 +2292,7 @@ static int nvme_dev_add(struct nvme_dev *dev)if (ret) {dev_warn (dev->ctrl.device,"IO queues tagset allocation failed %d\n" , ret); -return ret; +return ; } dev->ctrl.tagset = &dev->tagset; }else {
@@ -2306,7 +2303,6 @@ static int nvme_dev_add(struct nvme_dev *dev) }nvme_dbbuf_set (dev); -return 0 ; }static int nvme_pci_enable (struct nvme_dev *dev)
@@ -2526,7 +2522,6 @@ static void nvme_reset_work(struct work_struct *work) container_of(work, struct nvme_dev, ctrl.reset_work);bool was_suspend = !!(dev->ctrl.ctrl_config &NVME_CC_SHN_NORMAL );int result; -enum nvme_ctrl_state new_state =NVME_CTRL_LIVE ;if (WARN_ON (dev->ctrl.state !=NVME_CTRL_RESETTING )) { result = -ENODEV ;
@@ -2620,14 +2615,11 @@ static void nvme_reset_work(struct work_struct *work)dev_warn (dev->ctrl.device,"IO queues not created\n" );nvme_kill_queues (&dev->ctrl);nvme_remove_namespaces (&dev->ctrl); - new_state =NVME_CTRL_ADMIN_ONLY ;nvme_free_tagset (dev); }else {nvme_start_queues (&dev->ctrl);nvme_wait_freeze (&dev->ctrl); -/* hit this only when allocate tagset fails */ -if (nvme_dev_add (dev)) - new_state =NVME_CTRL_ADMIN_ONLY ; +nvme_dev_add (dev);nvme_unfreeze (&dev->ctrl); }
@@ -2635,9 +2627,9 @@ static void nvme_reset_work(struct work_struct *work)* If only admin queue live, keep it to do further investigation or * recovery. */ -if (!nvme_change_ctrl_state (&dev->ctrl, new_state)) { +if (!nvme_change_ctrl_state (&dev->ctrl,NVME_CTRL_LIVE )) {dev_warn (dev->ctrl.device, -"failed to mark controller state %d\n" , new_state); +"failed to mark controller live state\n" ); result = -ENODEV ; goto out; }
@@ -2934,8 +2926,7 @@ static int nvme_suspend(struct device *dev)nvme_wait_freeze (ctrl);nvme_sync_queues (ctrl); -if (ctrl->state !=NVME_CTRL_LIVE && - ctrl->state !=NVME_CTRL_ADMIN_ONLY ) +if (ctrl->state !=NVME_CTRL_LIVE ) goto unfreeze; ndev->last_ps =0 ;
Signature · 7 lines
2.14.5 _______________________________________________ Linux-nvme mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-nvme
Keith Busch
maintainerPATCH 5/5 nvme: Wait for reset state when required
In reply to Keith BuschDisabling a controller in a path that resets it in a different context needs to fence off other resets from occuring between these actions. Provide a method to block until we've successfully entered a reset state prior to disabling so that we can perform the controller disabling without racing with another reset. Otherwise, that other reset may either undo our teardown, or our teardown may undo the in-progress reset's bringup.
--- drivers/nvme/host/core.c | 36 +++++++++++++++++++++++++++++++++++- drivers/nvme/host/nvme.h | 3 +++ drivers/nvme/host/pci.c | 43 ++++++++++++++++++++++++++++++++----------- 3 files changed, 70 insertions(+), 12 deletions(-)
drivers/nvme/host/core.c +35 -1
@@ -367,8 +367,10 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,break ; } -if (changed) +if (changed) { ctrl->state = new_state; +wake_up_all (&ctrl->state_wq); + }spin_unlock_irqrestore (&ctrl->lock, flags);if (changed && ctrl->state ==NVME_CTRL_LIVE )
@@ -377,6 +379,37 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl, }EXPORT_SYMBOL_GPL (nvme_change_ctrl_state); +/* +* Returns false for sink states that can't ever transition back to live +*/ +static bool nvme_state_transient (struct nvme_ctrl *ctrl) +{ +switch (ctrl->state) { +case NVME_CTRL_NEW : +case NVME_CTRL_LIVE : +case NVME_CTRL_RESETTING : +case NVME_CTRL_CONNECTING : +return true;; +case NVME_CTRL_DELETING : +case NVME_CTRL_DEAD : +default : +return false; + } +} + +/* +* Waits for the controller state to be reset, or returns false if it is not +* possible to ever transition to reset. +*/ +bool nvme_wait_reset (struct nvme_ctrl *ctrl) +{ +wait_event (ctrl->state_wq, +nvme_change_ctrl_state (ctrl,NVME_CTRL_RESETTING ) || + !nvme_state_transient (ctrl)); +return ctrl->state ==NVME_CTRL_RESETTING ; +} +EXPORT_SYMBOL_GPL (nvme_wait_reset); +static void nvme_free_ns_head (struct kref *ref) { struct nvme_ns_head *head =
@@ -3841,6 +3874,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct device *dev,INIT_WORK (&ctrl->async_event_work, nvme_async_event_work);INIT_WORK (&ctrl->fw_act_work, nvme_fw_act_work);INIT_WORK (&ctrl->delete_work, nvme_delete_ctrl_work); +init_waitqueue_head (&ctrl->state_wq);INIT_DELAYED_WORK (&ctrl->ka_work, nvme_keep_alive_work);memset (&ctrl->ka_cmd,0 ,sizeof (ctrl->ka_cmd));
drivers/nvme/host/nvme.h +3 -0
@@ -15,6 +15,7 @@#include <linux/sed-opal.h> #include <linux/fault-inject.h> #include <linux/rcupdate.h> +#include <linux/wait.h> #include <trace/events/block.h>
@@ -193,6 +194,7 @@ struct nvme_ctrl {struct cdev cdev;struct work_struct reset_work;struct work_struct delete_work; +wait_queue_head_t state_wq;struct nvme_subsystem *subsys;struct list_head subsys_entry;
@@ -443,6 +445,7 @@ void nvme_complete_rq(struct request *req);bool nvme_cancel_request (struct request *req,void *data,bool reserved);bool nvme_change_ctrl_state (struct nvme_ctrl *ctrl,enum nvme_ctrl_state new_state); +bool nvme_wait_reset (struct nvme_ctrl *ctrl);int nvme_disable_ctrl (struct nvme_ctrl *ctrl);int nvme_enable_ctrl (struct nvme_ctrl *ctrl);int nvme_shutdown_ctrl (struct nvme_ctrl *ctrl);
drivers/nvme/host/pci.c +32 -11
103 lines not on this page · raw message
Signature · 7 lines
2.14.5 _______________________________________________ Linux-nvme mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-nvme
Re: [PATCH 5/5] nvme: Wait for reset state when required
Quoted 213 lines · Keith Busch
Disabling a controller in a path that resets it in a different context needs to fence off other resets from occuring between these actions. Provide a method to block until we've successfully entered a reset state prior to disabling so that we can perform the controller disabling without racing with another reset. Otherwise, that other reset may either undo our teardown, or our teardown may undo the in-progress reset's bringup.
Signed-off-by Keith Busch <[email protected]>--- drivers/nvme/host/core.c | 36 +++++++++++++++++++++++++++++++++++- drivers/nvme/host/nvme.h | 3 +++ drivers/nvme/host/pci.c | 43 ++++++++++++++++++++++++++++++++----------- 3 files changed, 70 insertions(+), 12 deletions(-)drivers/nvme/host/core.c +35
-1@@ -367,8 +367,10 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl,break ; } -if (changed) +if (changed) { ctrl->state = new_state; +wake_up_all (&ctrl->state_wq); + }spin_unlock_irqrestore (&ctrl->lock, flags);if (changed && ctrl->state ==NVME_CTRL_LIVE )@@ -377,6 +379,37 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl, }EXPORT_SYMBOL_GPL (nvme_change_ctrl_state); +/* +* Returns false for sink states that can't ever transition back to live +*/ +static bool nvme_state_transient (struct nvme_ctrl *ctrl) +{ +switch (ctrl->state) { +case NVME_CTRL_NEW : +case NVME_CTRL_LIVE : +case NVME_CTRL_RESETTING : +case NVME_CTRL_CONNECTING : +return true;; +case NVME_CTRL_DELETING : +case NVME_CTRL_DEAD : +default : +return false; + } +} + +/* +* Waits for the controller state to be reset, or returns false if it is not +* possible to ever transition to reset. +*/ +bool nvme_wait_reset (struct nvme_ctrl *ctrl) +{ +wait_event (ctrl->state_wq, +nvme_change_ctrl_state (ctrl,NVME_CTRL_RESETTING ) || + !nvme_state_transient (ctrl)); +return ctrl->state ==NVME_CTRL_RESETTING ; +} +EXPORT_SYMBOL_GPL (nvme_wait_reset); +static void nvme_free_ns_head (struct kref *ref) { struct nvme_ns_head *head =@@ -3841,6 +3874,7 @@ int nvme_init_ctrl(struct nvme_ctrl *ctrl, struct device *dev,INIT_WORK (&ctrl->async_event_work, nvme_async_event_work);INIT_WORK (&ctrl->fw_act_work, nvme_fw_act_work);INIT_WORK (&ctrl->delete_work, nvme_delete_ctrl_work); +init_waitqueue_head (&ctrl->state_wq);INIT_DELAYED_WORK (&ctrl->ka_work, nvme_keep_alive_work);memset (&ctrl->ka_cmd,0 ,sizeof (ctrl->ka_cmd));drivers/nvme/host/nvme.h +3
-0@@ -15,6 +15,7 @@#include <linux/sed-opal.h> #include <linux/fault-inject.h> #include <linux/rcupdate.h> +#include <linux/wait.h> #include <trace/events/block.h> @@ -193,6 +194,7 @@ struct nvme_ctrl {struct cdev cdev;struct work_struct reset_work;struct work_struct delete_work; +wait_queue_head_t state_wq;struct nvme_subsystem *subsys;struct list_head subsys_entry;@@ -443,6 +445,7 @@ void nvme_complete_rq(struct request *req);bool nvme_cancel_request (struct request *req,void *data,bool reserved);bool nvme_change_ctrl_state (struct nvme_ctrl *ctrl,enum nvme_ctrl_state new_state); +bool nvme_wait_reset (struct nvme_ctrl *ctrl);int nvme_disable_ctrl (struct nvme_ctrl *ctrl);int nvme_enable_ctrl (struct nvme_ctrl *ctrl);int nvme_shutdown_ctrl (struct nvme_ctrl *ctrl);drivers/nvme/host/pci.c +31
-11@@ -2462,6 +2462,14 @@ static void nvme_dev_disable(struct nvme_dev *dev, bool shutdown)mutex_unlock (&dev->shutdown_lock); } +static int nvme_disable_prepare_reset (struct nvme_dev *dev,bool shutdown) +{ +if (!nvme_wait_reset (&dev->ctrl)) +return -EBUSY ; +nvme_dev_disable (dev, shutdown); +return 0 ; +} +static int nvme_setup_prp_pools (struct nvme_dev *dev) { dev->prp_page_pool = dma_pool_create("prp list page", dev->dev,@@ -2509,6 +2517,11 @@ static void nvme_pci_free_ctrl(struct nvme_ctrl *ctrl)static void nvme_remove_dead_ctrl (struct nvme_dev *dev) { +/* +* Set state to deleting now to avoid blocking nvme_wait_reset(), which +* may be holding this pci_dev's device lock. +*/ +nvme_change_ctrl_state (&dev->ctrl,NVME_CTRL_DELETING );nvme_get_ctrl (&dev->ctrl);nvme_dev_disable (dev, false);nvme_kill_queues (&dev->ctrl);@@ -2833,19 +2846,27 @@ static int nvme_probe(struct pci_dev *pdev, const struct pci_device_id *id)static void nvme_reset_prepare (struct pci_dev *pdev) {struct nvme_dev *dev =pci_get_drvdata (pdev); -nvme_dev_disable (dev, false); + +/* +* We don't need to check the return value from waiting for the reset +* state as pci_dev device lock is held, making it impossible to race +* with ->remove(). +*/ +nvme_disable_prepare_reset (dev, false); +nvme_sync_queues (&dev->ctrl); }static void nvme_reset_done (struct pci_dev *pdev) {struct nvme_dev *dev =pci_get_drvdata (pdev); +nvme_change_ctrl_state (&dev->ctrl,NVME_CTRL_LIVE );nvme_reset_ctrl_sync (&dev->ctrl); }static void nvme_shutdown (struct pci_dev *pdev) {struct nvme_dev *dev =pci_get_drvdata (pdev); -nvme_dev_disable (dev, true); +nvme_disable_prepare_reset (dev, true); }/* @@ -2897,8 +2918,10 @@ static int nvme_resume(struct device *dev)struct nvme_ctrl *ctrl = &ndev->ctrl;if (pm_resume_via_firmware () || !ctrl->npss || -nvme_set_power_state (ctrl, ndev->last_ps) !=0 ) -nvme_reset_ctrl (ctrl); +nvme_set_power_state (ctrl, ndev->last_ps) !=0 ) { +if (nvme_change_ctrl_state (&ndev->ctrl,NVME_CTRL_LIVE )) +nvme_reset_ctrl (ctrl); + }return 0 ; }@@ -2917,10 +2940,8 @@ static int nvme_suspend(struct device *dev)* device does not support any non-default power states, shut down the * device fully. */ -if (pm_suspend_via_firmware () || !ctrl->npss) { -nvme_dev_disable (ndev, true); -return 0 ; - } +if (pm_suspend_via_firmware () || !ctrl->npss) +return nvme_disable_prepare_reset (ndev, true);nvme_start_freeze (ctrl);nvme_wait_freeze (ctrl);@@ -2943,9 +2964,8 @@ static int nvme_suspend(struct device *dev)* Clearing npss forces a controller reset on resume. The * correct value will be resdicovered then. */ -nvme_dev_disable (ndev, true); + ret =nvme_disable_prepare_reset (ndev, true); ctrl->npss =0 ; - ret =0 ; goto unfreeze; }/* @@ -2963,7 +2983,7 @@ static int nvme_simple_suspend(struct device *dev) {struct nvme_dev *ndev =pci_get_drvdata (to_pci_dev (dev)); -nvme_dev_disable (ndev, true); +nvme_disable_prepare_reset (ndev, true);return 0 ; }
drivers/nvme/host/pci.c static int nvme_simple_resume(struct device *dev) · line 2998
Quoted 7 lines
drivers/nvme/host/pci.c +1
-0@@ -2972,6 +2992,7 @@ static int nvme_simple_resume(struct device *dev)struct pci_dev *pdev =to_pci_dev (dev);struct nvme_dev *ndev =pci_get_drvdata (pdev); +nvme_change_ctrl_state (&ndev->ctrl,NVME_CTRL_LIVE );nvme_reset_ctrl (&ndev->ctrl);return 0 ; }
patches 1-4 look fine, and excluding fc on patch 1 was valid.
This patch overall looks fine too. I do get nervous that the new state transitions in some of these functions may make new state dependencies that show up in the common layers, especially around reset. Based on the pci vs core division and no actual change to the state transitions, it doesn't look like it bleeds out.
-- james
_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
Sagi Grimberg
maintainerRe: [PATCH 5/5] nvme: Wait for reset state when required
In reply to Keith BuschQuoted 8 lines
Disabling a controller in a path that resets it in a different context needs to fence off other resets from occuring between these actions. Provide a method to block until we've successfully entered a reset state prior to disabling so that we can perform the controller disabling without racing with another reset. Otherwise, that other reset may either undo our teardown, or our teardown may undo the in-progress reset's bringup.
Why not simply flushing the reset work like nvme_reset_ctrl_sync?
I might be out of context here...
_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
Keith Busch
maintainerRe: [PATCH 5/5] nvme: Wait for reset state when required
Quoted 9 lines · Sagi Grimberg
Quoted 8 lines
Disabling a controller in a path that resets it in a different context needs to fence off other resets from occuring between these actions. Provide a method to block until we've successfully entered a reset state prior to disabling so that we can perform the controller disabling without racing with another reset. Otherwise, that other reset may either undo our teardown, or our teardown may undo the in-progress reset's bringup.
Quoted 3 lines
Why not simply flushing the reset work like
nvme_reset_ctrl_sync?I might be out of context here...
It's not enough to know a current reset completes. We have to know that another won't schedule, which the RESETTING state guarantees.
More context:
This is for when we can't re-enable the controller in the same context as when we have to disable it.
For example, PCIe FLR occurs in two stages. Suspend/resume is another example. An IO timeout occuring concurrently with either gets the wrong end result because the timeout tries to incorrectly re-enable the device. This patch appropriatly synchronizes everyone through the state machine to prevent these things from running concurrently.
_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
Sagi Grimberg
maintainerdrivers/nvme/host/rdma.c nvme_rdma_timeout(struct request *rq, bool reserved) · line 1699
Quoted 10 lines
drivers/nvme/host/rdma.c +8
-0+/* +* Restart the timer if a controller reset is already scheduled. Any +* timed out commands would be handled before entering the connecting +* state. +*/ +if (ctrl->ctrl.state ==NVME_CTRL_RESETTING ) +return BLK_EH_RESET_TIMER ; +if (ctrl->ctrl.state !=NVME_CTRL_LIVE ) {
Not sure I understand what exactly is this solving? if the controller is not responding to a connect command, we just added another ADMIN_TIMEOUT to failing it.
_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
Keith Busch
maintainerQuoted 14 lines · Sagi Grimberg
drivers/nvme/host/rdma.c nvme_rdma_timeout(struct request *rq, bool reserved) · line 1699
Quoted 10 lines
drivers/nvme/host/rdma.c +8
-0+/* +* Restart the timer if a controller reset is already scheduled. Any +* timed out commands would be handled before entering the connecting +* state. +*/ +if (ctrl->ctrl.state ==NVME_CTRL_RESETTING ) +return BLK_EH_RESET_TIMER ; +if (ctrl->ctrl.state !=NVME_CTRL_LIVE ) {Not sure I understand what exactly is this solving? if the controller is not responding to a connect command, we just added another
ADMIN_TIMEOUTto failing it.
The connect command is sent in the CONNECTING state, no? So that's not affected by this. The point of this patch is to not do anything in a reset state because whatever set the reset state is responsible for clearing any commands prior to exiting that state.
But the motivation for why I'm bringing this up now is that it also prepares for PATCH 2/5. That one uses the RESETTING state when the controller reports CSTS.PP. We do not want to schedule a reset when the controller is in that state, and we also expect any IO dispatched prior to seeing CSTS.PP may time out. Any IO should complete once CSTS.PP clears, so not escalating recovery is the correct action during that window, and we use the state machine to coordinate that.
_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
Sagi Grimberg
maintainerQuoted 15 lines
Quoted 14 lines
drivers/nvme/host/rdma.c nvme_rdma_timeout(struct request *rq, bool reserved) · line 1699
Quoted 10 lines
drivers/nvme/host/rdma.c +8
-0+/* +* Restart the timer if a controller reset is already scheduled. Any +* timed out commands would be handled before entering the connecting +* state. +*/ +if (ctrl->ctrl.state ==NVME_CTRL_RESETTING ) +return BLK_EH_RESET_TIMER ; +if (ctrl->ctrl.state !=NVME_CTRL_LIVE ) {Not sure I understand what exactly is this solving? if the controller is not responding to a connect command, we just added another
ADMIN_TIMEOUTto failing it.
Quoted 2 lines
The connect command is sent in the CONNECTING state, no? So that's not affected by this.
Right. but if the channel failed in connect, we will not transition to RESTTING and handle the failure in the timeout handler. I will need to test what is the effect here.
Quoted 3 lines
The point of this patch is to not do anything in a
reset state because whatever set the reset state is responsible for clearing any commands prior to exiting that state.
OK, we might need a bit more to make this correct in the fabrics drivers.
Quoted 7 lines
But the motivation for why I'm bringing this up now is that it also prepares for PATCH 2/5. That one uses the RESETTING state when the controller reports CSTS.PP. We do not want to schedule a reset when the controller is in that state, and we also expect any IO dispatched prior to seeing CSTS.PP may time out. Any IO should complete once CSTS.PP clears, so not escalating recovery is the correct action during that window, and we use the state machine to coordinate that.
I think that patch 2/5 needs some more in-code documentation to explain why its mangling with the controller state machine without going through the normal state changing operations.
_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme
Quoted 7 lines · Sagi Grimberg
Quoted 4 lines
The point of this patch is to not do anything in a
reset state because whatever set the reset state is responsible for clearing any commands prior to exiting that state.OK, we might need a bit more to make this correct in the fabrics drivers.
We certainly should be meeting this bar:
rdma/tcp uses blk_mq_tagset_busy_iter() with nvme_cancel_request, which is immediately completion of anything outstanding.
FC uses blk_mq_tagset_busy_iter() with an abort path then waits for the io aborts.
These coupled with the fabrics check-ready logic to not accept new io should mean we meet the bar.
-- james
_______________________________________________
Linux-nvme mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-nvme