board: stm32mp1: fixup the usb product id for USB download gadget
PATCH 1/1 board: stm32mp1: fixup the usb product id for USB download gadget
Select the correct USB product id used by the download gadget for ST stm32mp1 boards.
The board stm32mp1 select the correct product id, as defined in
http://www.linux-usb.org/usb.ids for the STMicroelectronics vendor id = 0x0483 (CONFIG_USB_GADGET_VENDOR_NUM):
- dfu = 0xdf11 : STM Device in DFU mode
it is the value used by ROM code and reused for stm32prog command
- fasboot = 0x0afb : Android Fastboot device
- others = 0x5720 (CONFIG_USB_GADGET_PRODUCT_NUM) Mass Storage Device
it is used for UMS command / usb_dnl_ums
This patch avoid conflict when the same USB VID/PID is used for ums, fastboot or dfu command (two different protocols associated to the same PID).
---
board/st/stm32mp1/stm32mp1.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
board/st/stm32mp1/stm32mp1.c +17 -0
@@ -233,6 +233,23 @@ int g_dnl_board_usb_cable_connected(void) return dwc2_udc_B_session_valid(dwc2_udc_otg); } + +#define STM32MP1_G_DNL_DFU_PRODUCT_NUM 0xdf11 +#define STM32MP1_G_DNL_FASTBOOT_PRODUCT_NUM 0x0afb + +int g_dnl_bind_fixup (struct usb_device_descriptor *dev,const char *name) +{ +if (!strcmp (name,"usb_dnl_dfu" )) +put_unaligned (STM32MP1_G_DNL_DFU_PRODUCT_NUM , &dev->idProduct); +else if (!strcmp (name,"usb_dnl_fastboot" )) +put_unaligned (STM32MP1_G_DNL_FASTBOOT_PRODUCT_NUM , + &dev->idProduct); +else +put_unaligned (CONFIG_USB_GADGET_PRODUCT_NUM , &dev->idProduct); + +return 0 ; +} +#endif /* CONFIG_USB_GADGET */ #ifdef CONFIG_LED
Signature · 1 line
2.17.1
PATCH 1/1 board: stm32mp1: fixup the usb product id for USB download gadget
Hi Patrick
Quoted 42 lines · Patrick Delaunay
Select the correct USB product id used by the download gadget for ST stm32mp1 boards.
The board stm32mp1 select the correct product id, as defined in
http://www.linux-usb.org/usb.ids for the STMicroelectronics vendor id =0x0483(CONFIG_USB_GADGET_VENDOR_NUM):
- dfu =0xdf11: STM Device in DFU mode
it is the value used by ROM code and reused for stm32prog command
- fasboot =0x0afb: Android Fastboot device
- others =0x5720(CONFIG_USB_GADGET_PRODUCT_NUM) Mass Storage Device
it is used for UMS command /usb_dnl_umsThis patch avoid conflict when the same USB VID/PID is used for ums, fastboot or dfu command (two different protocols associated to the same PID).
Signed-off-by Patrick Delaunay <[email protected]>---
board/st/stm32mp1/stm32mp1.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)board/st/stm32mp1/stm32mp1.c +10
-0@@ -233,6 +233,23 @@ int g_dnl_board_usb_cable_connected(void)return dwc2_udc_B_session_valid (dwc2_udc_otg); } + +#define STM32MP1_G_DNL_DFU_PRODUCT_NUM 0xdf11 +#define STM32MP1_G_DNL_FASTBOOT_PRODUCT_NUM 0x0afb + +int g_dnl_bind_fixup (struct usb_device_descriptor *dev,const char *name) +{ +if (!strcmp (name,"usb_dnl_dfu" )) +put_unaligned (STM32MP1_G_DNL_DFU_PRODUCT_NUM , &dev->idProduct); +else if (!strcmp (name,"usb_dnl_fastboot" )) + put_unaligned(STM32MP1_G_DNL_FASTBOOT_PRODUCT_NUM,
board/st/stm32mp1/stm32mp1.c int g_dnl_board_usb_cable_connected(void) · line 255
Quoted 10 lines
board/st/stm32mp1/stm32mp1.c +7
-0+ &dev->idProduct); + else + put_unaligned(CONFIG_USB_GADGET_PRODUCT_NUM, &dev->idProduct); + + return 0; +} +#endif /* CONFIG_USB_GADGET */ #ifdef CONFIG_LED
Thanks
PATCH 1/1 board: stm32mp1: fixup the usb product id for USB download gadget
In reply to Patrick DelaunayQuoted 15 lines
Select the correct USB product id used by the download gadget for ST stm32mp1 boards.
The board stm32mp1 select the correct product id, as defined in http://www.linux-
usb.org/usb.ids for the STMicroelectronics vendor id =0x0483(CONFIG_USB_GADGET_VENDOR_NUM):
- dfu =0xdf11: STM Device in DFU mode
it is the value used by ROM code and reused for stm32prog
command
- fasboot =0x0afb: Android Fastboot device
- others =0x5720(CONFIG_USB_GADGET_PRODUCT_NUM)
Mass Storage Device
it is used for UMS command /usb_dnl_ums
Quoted 5 lines
This patch avoid conflict when the same USB VID/PID is used for ums, fastboot or dfu command (two different protocols associated to the same PID).
Signed-off-by Patrick Delaunay <[email protected]>---
Applied to u-boot-stm32/master, thanks!