4.14.145-stable review

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/bridge/br_mdb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/bridge/br_mdb.c +1 -1

@@ -373,7 +373,7 @@ static int nlmsg_populate_rtr_fill(struc
 	struct nlmsghdr *nlh;
 	struct nlattr *nest;
 
-	nlh = nlmsg_put(skb, pid, seq, type, sizeof(*bpm), NLM_F_MULTI);
+	nlh = nlmsg_put(skb, pid, seq, type, sizeof(*bpm), 0);
 	if (!nlh)
 		return -EMSGSIZE;

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #2 lore raw

PATCH 2/45 cdc_ether: fix rndis support for Mediatek based smartphones

From: "Bjørn Mork" <[email protected]>

[ Upstream commit 4d7ffcf3bf1be98d876c570cab8fc31d9fa92725 ]

A Mediatek based smartphone owner reports problems with USB tethering in Linux. The verbose USB listing shows a rndis_host interface pair (e0/01/03 + 10/00/00), but the driver fails to bind with

[  355.960428] usb 1-4: bad CDC descriptors

The problem is a failsafe test intended to filter out ACM serial functions using the same 02/02/ff class/subclass/protocol as RNDIS. The serial functions are recognized by their non-zero bmCapabilities.

No RNDIS function with non-zero bmCapabilities were known at the time this failsafe was added. But it turns out that some Wireless class RNDIS functions are using the bmCapabilities field. These functions are uniquely identified as RNDIS by their class/subclass/protocol, so the failing test can safely be disabled. The same applies to the two types of Misc class RNDIS functions.

Applying the failsafe to Communication class functions only retains the original functionality, and fixes the problem for the Mediatek based smartphone.

Tow examples of CDC functional descriptors with non-zero bmCapabilities from Wireless class RNDIS functions are:

0e8d:000a Mediatek Crosscall Spider X5 3G Phone

CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x0f
connection notifications
sends break
line coding and serial state
get/set/clear comm features
CDC Union:
bMasterInterface 0
bSlaveInterface 1
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1

and

19d2:1023 ZTE K4201-z

CDC Header:
bcdCDC 1.10
CDC ACM:
bmCapabilities 0x02
line coding and serial state
CDC Call Management:
bmCapabilities 0x03
call management
use DataInterface
bDataInterface 1
CDC Union:
bMasterInterface 0
bSlaveInterface 1

The Mediatek example is believed to apply to most smartphones with Mediatek firmware. The ZTE example is most likely also part of a larger family of devices/firmwares.

Signed-off-by Bjørn Mork <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/usb/cdc_ether.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)

drivers/net/usb/cdc_ether.c +10 -3

@@ -221,9 +221,16 @@ int usbnet_generic_cdc_bind(struct usbne
 		goto bad_desc;
 	}
 skip:
-	if (	rndis &&
-		header.usb_cdc_acm_descriptor &&
-		header.usb_cdc_acm_descriptor->bmCapabilities) {
+	/* Communcation class functions with bmCapabilities are not
+	 * RNDIS.  But some Wireless class RNDIS functions use
+	 * bmCapabilities for their own purpose. The failsafe is
+	 * therefore applied only to Communication class RNDIS
+	 * functions.  The rndis test is redundant, but a cheap
+	 * optimization.
+	 */
+	if (rndis && is_rndis(&intf->cur_altsetting->desc) &&
+	    header.usb_cdc_acm_descriptor &&
+	    header.usb_cdc_acm_descriptor->bmCapabilities) {
 			dev_dbg(&intf->dev,
 				"ACM capabilities %02x, not really RNDIS?\n",
 				header.usb_cdc_acm_descriptor->bmCapabilities);

Greg Kroah-Hartman

author maintainer

2019-09-18 06:33 UTC #3 lore raw

PATCH 3/45 ipv6: Fix the link time qualifier of ping_v6_proc_exit_net()

From: Christophe JAILLET <[email protected]>

[ Upstream commit d23dbc479a8e813db4161a695d67da0e36557846 ]

The '.exit' functions from 'pernet_operations' structure should be marked as __net_exit, not __net_init.

Fixes d862e5461423 ("net: ipv6: Implement /proc/net/icmp6.")

Signed-off-by Christophe JAILLET <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/ipv6/ping.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/ipv6/ping.c +1 -1

@@ -233,7 +233,7 @@ static int __net_init ping_v6_proc_init_
 	return ping_proc_register(net, &ping_v6_seq_afinfo);
 }
 
-static void __net_init ping_v6_proc_exit_net(struct net *net)
+static void __net_exit ping_v6_proc_exit_net(struct net *net)
 {
 	return ping_proc_unregister(net, &ping_v6_seq_afinfo);
 }

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #4 lore raw

PATCH 4/45 isdn/capi: check message length in capi_write()

From: Eric Biggers <[email protected]>

[ Upstream commit fe163e534e5eecdfd7b5920b0dfd24c458ee85d6 ]

syzbot reported:

    BUG: KMSAN: uninit-value in capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700
    CPU: 0 PID: 10025 Comm: syz-executor379 Not tainted 4.20.0-rc7+ #2
    Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
    Call Trace:
      __dump_stack lib/dump_stack.c:77 [inline]
      dump_stack+0x173/0x1d0 lib/dump_stack.c:113
      kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
      __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
      capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700
      do_loop_readv_writev fs/read_write.c:703 [inline]
      do_iter_write+0x83e/0xd80 fs/read_write.c:961
      vfs_writev fs/read_write.c:1004 [inline]
      do_writev+0x397/0x840 fs/read_write.c:1039
      __do_sys_writev fs/read_write.c:1112 [inline]
      __se_sys_writev+0x9b/0xb0 fs/read_write.c:1109
      __x64_sys_writev+0x4a/0x70 fs/read_write.c:1109
      do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
      entry_SYSCALL_64_after_hwframe+0x63/0xe7
    [...]

The problem is that capi_write() is reading past the end of the message. Fix it by checking the message's length in the needed places.

Reported-and-tested-by [email protected]

Signed-off-by Eric Biggers <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/isdn/capi/capi.c          |   10 +++++++++-
 include/uapi/linux/isdn/capicmd.h |    1 +
 2 files changed, 10 insertions(+), 1 deletion(-)

drivers/isdn/capi/capi.c +9 -1

@@ -687,6 +687,9 @@ capi_write(struct file *file, const char
 	if (!cdev->ap.applid)
 		return -ENODEV;
 
+	if (count < CAPIMSG_BASELEN)
+		return -EINVAL;
+
 	skb = alloc_skb(count, GFP_USER);
 	if (!skb)
 		return -ENOMEM;

@@ -697,7 +700,8 @@ capi_write(struct file *file, const char
 	}
 	mlen = CAPIMSG_LEN(skb->data);
 	if (CAPIMSG_CMD(skb->data) == CAPI_DATA_B3_REQ) {
-		if ((size_t)(mlen + CAPIMSG_DATALEN(skb->data)) != count) {
+		if (count < CAPI_DATA_B3_REQ_LEN ||
+		    (size_t)(mlen + CAPIMSG_DATALEN(skb->data)) != count) {
 			kfree_skb(skb);
 			return -EINVAL;
 		}

@@ -710,6 +714,10 @@ capi_write(struct file *file, const char
 	CAPIMSG_SETAPPID(skb->data, cdev->ap.applid);
 
 	if (CAPIMSG_CMD(skb->data) == CAPI_DISCONNECT_B3_RESP) {
+		if (count < CAPI_DISCONNECT_B3_RESP_LEN) {
+			kfree_skb(skb);
+			return -EINVAL;
+		}
 		mutex_lock(&cdev->lock);
 		capincci_free(cdev, CAPIMSG_NCCI(skb->data));
 		mutex_unlock(&cdev->lock);

include/uapi/linux/isdn/capicmd.h +1 -0

@@ -16,6 +16,7 @@
 #define CAPI_MSG_BASELEN		8
 #define CAPI_DATA_B3_REQ_LEN		(CAPI_MSG_BASELEN+4+4+2+2+2)
 #define CAPI_DATA_B3_RESP_LEN		(CAPI_MSG_BASELEN+4+2)
+#define CAPI_DISCONNECT_B3_RESP_LEN	(CAPI_MSG_BASELEN+4)
 
 /*----- CAPI commands -----*/
 #define CAPI_ALERT		    0x01

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #5 lore raw

PATCH 5/45 net: Fix null de-reference of device refcount

From: Subash Abhinov Kasiviswanathan <[email protected]>

[ Upstream commit 10cc514f451a0f239aa34f91bc9dc954a9397840 ]

In event of failure during register_netdevice, free_netdev is invoked immediately. free_netdev assumes that all the netdevice refcounts have been dropped prior to it being called and as a result frees and clears out the refcount pointer.

However, this is not necessarily true as some of the operations in the NETDEV_UNREGISTER notifier handlers queue RCU callbacks for invocation after a grace period. The IPv4 callback in_dev_rcu_put tries to access the refcount after free_netdev is called which leads to a null de-reference-

44837.761523: <6> Unable to handle kernel paging request at

                    virtual address 0000004a88287000
44837.761651:   <2> pc : in_dev_finish_destroy+0x4c/0xc8
44837.761654:   <2> lr : in_dev_finish_destroy+0x2c/0xc8
44837.762393:   <2> Call trace:
44837.762398:   <2>  in_dev_finish_destroy+0x4c/0xc8
44837.762404:   <2>  in_dev_rcu_put+0x24/0x30
44837.762412:   <2>  rcu_nocb_kthread+0x43c/0x468
44837.762418:   <2>  kthread+0x118/0x128
44837.762424:   <2>  ret_from_fork+0x10/0x1c

Fix this by waiting for the completion of the call_rcu() in case of register_netdevice errors.

Fixes 93ee31f14f6f ("[NET]: Fix free_netdev on register_netdev failure.")

Cc Sean Tranchetti <[email protected]>

Signed-off-by Subash Abhinov Kasiviswanathan <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/core/dev.c |    2 ++
 1 file changed, 2 insertions(+)

net/core/dev.c +2 -0

@@ -7698,6 +7698,8 @@ int register_netdevice(struct net_device
 	ret = notifier_to_errno(ret);
 	if (ret) {
 		rollback_registered(dev);
+		rcu_barrier();
+
 		dev->reg_state = NETREG_UNREGISTERED;
 	}
 	/*

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #6 lore raw

PATCH 6/45 net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list

[0]
https://lore.kernel.org/netdev/20190826170724.25ff616f@pixies/
https://lore.kernel.org/netdev/[email protected]/

From: Shmulik Ladkani <[email protected]>

[ Upstream commit 3dcbdb134f329842a38f0e6797191b885ab00a00 ]

Historically, support for frag_list packets entering skb_segment() was limited to frag_list members terminating on exact same gso_size boundaries. This is verified with a BUG_ON since commit 89319d3801d1 ("net: Add frag_list support to skb_segment"), quote:

As such we require all frag_list members terminate on exact MSS boundaries. This is checked using BUG_ON.
As there should only be one producer in the kernel of such packets, namely GRO, this requirement should not be difficult to maintain.

However, since commit 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper"), the "exact MSS boundaries" assumption no longer holds:
An eBPF program using bpf_skb_change_proto() DOES modify 'gso_size', but leaves the frag_list members as originally merged by GRO with the original 'gso_size'. Example of such programs are bpf-based NAT46 or NAT64.

This lead to a kernel BUG_ON for flows involving:
- GRO generating a frag_list skb
- bpf program performing bpf_skb_change_proto() or bpf_skb_adjust_room()
- skb_segment() of the skb

See example BUG_ON reports in [0].

In commit 13acc94eff12 ("net: permit skb_segment on head_frag frag_list skb"), skb_segment() was modified to support the "gso_size mangling" case of a frag_list GRO'ed skb, but *only* for frag_list members having head_frag==true (having a page-fragment head).

Alas, GRO packets having frag_list members with a linear kmalloced head (head_frag==false) still hit the BUG_ON.

This commit adds support to skb_segment() for a 'head_skb' packet having a frag_list whose members are *non* head_frag, with gso_size mangled, by disabling SG and thus falling-back to copying the data from the given 'head_skb' into the generated segmented skbs - as suggested by Willem de Bruijn [1].

Since this approach involves the penalty of skb_copy_and_csum_bits() when building the segments, care was taken in order to enable this solution only when required:
- untrusted gso_size, by testing SKB_GSO_DODGY is set (SKB_GSO_DODGY is set by any gso_size mangling functions in net/core/filter.c)
- the frag_list is non empty, its item is a non head_frag, *and* the headlen of the given 'head_skb' does not match the gso_size.

[1]
https://lore.kernel.org/netdev/CA+FuTSfVsgNDi7c=GUU8nMg2hWxF2SjCNLXetHeVPdnxAW5K-w@mail.gmail.com/

Fixes 6578171a7ff0 ("bpf: add bpf_skb_change_proto helper")

Cc Daniel Borkmann <[email protected]>

Cc Eric Dumazet <[email protected]>

Cc Alexander Duyck <[email protected]>

Signed-off-by Shmulik Ladkani <[email protected]>

Reviewed-by Willem de Bruijn <[email protected]>

Reviewed-by Alexander Duyck <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/core/skbuff.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

net/core/skbuff.c +19 -0

@@ -3514,6 +3514,25 @@ struct sk_buff *skb_segment(struct sk_bu
 	int pos;
 	int dummy;
 
+	if (list_skb && !list_skb->head_frag && skb_headlen(list_skb) &&
+	    (skb_shinfo(head_skb)->gso_type & SKB_GSO_DODGY)) {
+		/* gso_size is untrusted, and we have a frag_list with a linear
+		 * non head_frag head.
+		 *
+		 * (we assume checking the first list_skb member suffices;
+		 * i.e if either of the list_skb members have non head_frag
+		 * head, then the first one has too).
+		 *
+		 * If head_skb's headlen does not fit requested gso_size, it
+		 * means that the frag_list members do NOT terminate on exact
+		 * gso_size boundaries. Hence we cannot perform skb_frag_t page
+		 * sharing. Therefore we must fallback to copying the frag_list
+		 * skbs; we do so by disabling SG.
+		 */
+		if (mss != GSO_BY_FRAGS && mss != skb_headlen(head_skb))
+			features &= ~NETIF_F_SG;
+	}
+
 	__skb_push(head_skb, doffset);
 	proto = skb_network_protocol(head_skb, &dummy);
 	if (unlikely(!proto))

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #7 lore raw

PATCH 7/45 net: phylink: Fix flow control resolution

From: Stefan Chulski <[email protected]>

[ Upstream commit 63b2ed4e10b2e6c913e1d8cdd728e7fba4115a3d ]

Regarding to IEEE 802.3-2015 standard section 2 28B.3 Priority resolution - Table 28-3 - Pause resolution

In case of Local device Pause=1 AsymDir=0, Link partner Pause=1 AsymDir=1, Local device resolution should be enable PAUSE transmit, disable PAUSE receive.
And in case of Local device Pause=1 AsymDir=1, Link partner Pause=1 AsymDir=0, Local device resolution should be enable PAUSE receive, disable PAUSE transmit.

Fixes 9525ae83959b ("phylink: add phylink infrastructure")

Signed-off-by Stefan Chulski <[email protected]>

Reported-by Shaul Ben-Mayor <[email protected]>

Acked-by Russell King <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/phy/phylink.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

drivers/net/phy/phylink.c +3 -3

@@ -359,8 +359,8 @@ static void phylink_get_fixed_state(stru
  *  Local device  Link partner
  *  Pause AsymDir Pause AsymDir Result
  *    1     X       1     X     TX+RX
- *    0     1       1     1     RX
- *    1     1       0     1     TX
+ *    0     1       1     1     TX
+ *    1     1       0     1     RX
  */
 static void phylink_resolve_flow(struct phylink *pl,
 	struct phylink_link_state *state)

@@ -381,7 +381,7 @@ static void phylink_resolve_flow(struct
 			new_pause = MLO_PAUSE_TX | MLO_PAUSE_RX;
 		else if (pause & MLO_PAUSE_ASYM)
 			new_pause = state->pause & MLO_PAUSE_SYM ?
-				 MLO_PAUSE_RX : MLO_PAUSE_TX;
+				 MLO_PAUSE_TX : MLO_PAUSE_RX;
 	} else {
 		new_pause = pl->link_config.pause & MLO_PAUSE_TXRX_MASK;
 	}

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #8 lore raw

PATCH 8/45 sch_hhf: ensure quantum and hhf_non_hh_weight are non-zero

From: Cong Wang <[email protected]>

[ Upstream commit d4d6ec6dac07f263f06d847d6f732d6855522845 ]

In case of TCA_HHF_NON_HH_WEIGHT or TCA_HHF_QUANTUM is zero, it would make no progress inside the loop in hhf_dequeue() thus kernel would get stuck.

Fix this by checking this corner case in hhf_change().

Fixes 10239edf86f1 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")

Reported-by [email protected]

Cc Jamal Hadi Salim <[email protected]>

Cc Jiri Pirko <[email protected]>

Cc Terry Lam <[email protected]>

Signed-off-by Cong Wang <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/sched/sch_hhf.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/sched/sch_hhf.c +1 -1

@@ -528,7 +528,7 @@ static int hhf_change(struct Qdisc *sch,
 		new_hhf_non_hh_weight = nla_get_u32(tb[TCA_HHF_NON_HH_WEIGHT]);
 
 	non_hh_quantum = (u64)new_quantum * new_hhf_non_hh_weight;
-	if (non_hh_quantum > INT_MAX)
+	if (non_hh_quantum == 0 || non_hh_quantum > INT_MAX)
 		return -EINVAL;
 
 	sch_tree_lock(sch);

Greg Kroah-Hartman

author maintainer

2019-09-18 06:32 UTC #9 lore raw

PATCH 9/45 sctp: Fix the link time qualifier of sctp_ctrlsock_exit()

From: Christophe JAILLET <[email protected]>

[ Upstream commit b456d72412ca8797234449c25815e82f4e1426c0 ]

The '.exit' functions from 'pernet_operations' structure should be marked as __net_exit, not __net_init.

Fixes 8e2d61e0aed2 ("sctp: fix race on protocol/netns initialization")

Signed-off-by Christophe JAILLET <[email protected]>

Acked-by Marcelo Ricardo Leitner <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/sctp/protocol.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/sctp/protocol.c +1 -1

@@ -1344,7 +1344,7 @@ static int __net_init sctp_ctrlsock_init
 	return status;
 }
 
-static void __net_init sctp_ctrlsock_exit(struct net *net)
+static void __net_exit sctp_ctrlsock_exit(struct net *net)
 {
 	/* Free the control endpoint.  */
 	inet_ctl_sock_destroy(net->sctp.ctl_sock);

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #10 lore raw

PATCH 10/45 sctp: use transport pf_retrans in sctp_do_8_2_transport_strike

From: Xin Long <[email protected]>

[ Upstream commit 10eb56c582c557c629271f1ee31e15e7a9b2558b ]

Transport should use its own pf_retrans to do the error_count check, instead of asoc's. Otherwise, it's meaningless to make pf_retrans per transport.

Fixes 5aa93bcf66f4 ("sctp: Implement quick failover draft from tsvwg")

Signed-off-by Xin Long <[email protected]>

Acked-by Marcelo Ricardo Leitner <[email protected]>

Acked-by Neil Horman <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/sctp/sm_sideeffect.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/sctp/sm_sideeffect.c +1 -1

@@ -542,7 +542,7 @@ static void sctp_do_8_2_transport_strike
 	if (net->sctp.pf_enable &&
 	   (transport->state == SCTP_ACTIVE) &&
 	   (transport->error_count < transport->pathmaxrxt) &&
-	   (transport->error_count > asoc->pf_retrans)) {
+	   (transport->error_count > transport->pf_retrans)) {
 
 		sctp_assoc_control_transport(asoc, transport,
 					     SCTP_TRANSPORT_PF,

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #11 lore raw

PATCH 11/45 tcp: fix tcp_ecn_withdraw_cwr() to clear TCP_ECN_QUEUE_CWR

From: Neal Cardwell <[email protected]>

[ Upstream commit af38d07ed391b21f7405fa1f936ca9686787d6d2 ]

Fix tcp_ecn_withdraw_cwr() to clear the correct bit:
TCP_ECN_QUEUE_CWR.

Rationale: basically, TCP_ECN_DEMAND_CWR is a bit that is purely about the behavior of data receivers, and deciding whether to reflect incoming IP ECN CE marks as outgoing TCP th->ece marks. The TCP_ECN_QUEUE_CWR bit is purely about the behavior of data senders, and deciding whether to send CWR. The tcp_ecn_withdraw_cwr() function is only called from tcp_undo_cwnd_reduction() by data senders during an undo, so it should zero the sender-side state, TCP_ECN_QUEUE_CWR. It does not make sense to stop the reflection of incoming CE bits on incoming data packets just because outgoing packets were spuriously retransmitted.

The bug has been reproduced with packetdrill to manifest in a scenario with RFC3168 ECN, with an incoming data packet with CE bit set and carrying a TCP timestamp value that causes cwnd undo. Before this fix, the IP CE bit was ignored and not reflected in the TCP ECE header bit, and sender sent a TCP CWR ('W') bit on the next outgoing data packet, even though the cwnd reduction had been undone. After this fix, the sender properly reflects the CE bit and does not set the W bit.

Note: the bug actually predates 2005 git history; this Fixes footer is chosen to be the oldest SHA1 I have tested (from Sep 2007) for which the patch applies cleanly (since before this commit the code was in a .h file).

Fixes bdf1ee5d3bd3 ("[TCP]: Move code from tcp_ecn.h to tcp*.c and tcp.h & remove it")

Signed-off-by Neal Cardwell <[email protected]>

Acked-by Yuchung Cheng <[email protected]>

Acked-by Soheil Hassas Yeganeh <[email protected]>

Cc Eric Dumazet <[email protected]>

Signed-off-by Eric Dumazet <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/ipv4/tcp_input.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

net/ipv4/tcp_input.c +1 -1

@@ -247,7 +247,7 @@ static void tcp_ecn_accept_cwr(struct tc
 
 static void tcp_ecn_withdraw_cwr(struct tcp_sock *tp)
 {
-	tp->ecn_flags &= ~TCP_ECN_DEMAND_CWR;
+	tp->ecn_flags &= ~TCP_ECN_QUEUE_CWR;
 }
 
 static void __tcp_ecn_check_ce(struct sock *sk, const struct sk_buff *skb)

Greg Kroah-Hartman

author maintainer

2019-09-18 06:33 UTC #12 lore raw

PATCH 12/45 tipc: add NULL pointer check before calling kfree_rcu

From: Xin Long <[email protected]>

[ Upstream commit 42dec1dbe38239cf91cc1f4df7830c66276ced37 ]

Unlike kfree(p), kfree_rcu(p, rcu) won't do NULL pointer check. When tipc_nametbl_remove_publ returns NULL, the panic below happens:

   BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
   RIP: 0010:__call_rcu+0x1d/0x290
   Call Trace:
    <IRQ>
    tipc_publ_notify+0xa9/0x170 [tipc]
    tipc_node_write_unlock+0x8d/0x100 [tipc]
    tipc_node_link_down+0xae/0x1d0 [tipc]
    tipc_node_check_dest+0x3ea/0x8f0 [tipc]
    ? tipc_disc_rcv+0x2c7/0x430 [tipc]
    tipc_disc_rcv+0x2c7/0x430 [tipc]
    ? tipc_rcv+0x6bb/0xf20 [tipc]
    tipc_rcv+0x6bb/0xf20 [tipc]
    ? ip_route_input_slow+0x9cf/0xb10
    tipc_udp_recv+0x195/0x1e0 [tipc]
    ? tipc_udp_is_known_peer+0x80/0x80 [tipc]
    udp_queue_rcv_skb+0x180/0x460
    udp_unicast_rcv_skb.isra.56+0x75/0x90
    __udp4_lib_rcv+0x4ce/0xb90
    ip_local_deliver_finish+0x11c/0x210
    ip_local_deliver+0x6b/0xe0
    ? ip_rcv_finish+0xa9/0x410
    ip_rcv+0x273/0x362

Fixes 97ede29e80ee ("tipc: convert name table read-write lock to RCU")

Reported-by Li Shuang <[email protected]>

Signed-off-by Xin Long <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 net/tipc/name_distr.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

net/tipc/name_distr.c +2 -1

@@ -224,7 +224,8 @@ static void tipc_publ_purge(struct net *
 		       publ->key);
 	}
 
-	kfree_rcu(p, rcu);
+	if (p)
+		kfree_rcu(p, rcu);
 }
 
 /**

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #13 lore raw

PATCH 13/45 tun: fix use-after-free when register netdev failed

From: Yang Yingliang <[email protected]>

[ Upstream commit 77f22f92dff8e7b45c7786a430626d38071d4670 ]

I got a UAF repport in tun driver when doing fuzzy test:

[  466.269490] ==================================================================
[  466.271792] BUG: KASAN: use-after-free in tun_chr_read_iter+0x2ca/0x2d0
[  466.271806] Read of size 8 at addr ffff888372139250 by task tun-test/2699
[  466.271810]
[  466.271824] CPU: 1 PID: 2699 Comm: tun-test Not tainted 5.3.0-rc1-00001-g5a9433db2614-dirty #427
[  466.271833] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
[  466.271838] Call Trace:
[  466.271858]  dump_stack+0xca/0x13e
[  466.271871]  ? tun_chr_read_iter+0x2ca/0x2d0
[  466.271890]  print_address_description+0x79/0x440
[  466.271906]  ? vprintk_func+0x5e/0xf0
[  466.271920]  ? tun_chr_read_iter+0x2ca/0x2d0
[  466.271935]  __kasan_report+0x15c/0x1df
[  466.271958]  ? tun_chr_read_iter+0x2ca/0x2d0
[  466.271976]  kasan_report+0xe/0x20
[  466.271987]  tun_chr_read_iter+0x2ca/0x2d0
[  466.272013]  do_iter_readv_writev+0x4b7/0x740
[  466.272032]  ? default_llseek+0x2d0/0x2d0
[  466.272072]  do_iter_read+0x1c5/0x5e0
[  466.272110]  vfs_readv+0x108/0x180
[  466.299007]  ? compat_rw_copy_check_uvector+0x440/0x440
[  466.299020]  ? fsnotify+0x888/0xd50
[  466.299040]  ? __fsnotify_parent+0xd0/0x350
[  466.299064]  ? fsnotify_first_mark+0x1e0/0x1e0
[  466.304548]  ? vfs_write+0x264/0x510
[  466.304569]  ? ksys_write+0x101/0x210
[  466.304591]  ? do_preadv+0x116/0x1a0
[  466.304609]  do_preadv+0x116/0x1a0
[  466.309829]  do_syscall_64+0xc8/0x600
[  466.309849]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  466.309861] RIP: 0033:0x4560f9
[  466.309875] Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[  466.309889] RSP: 002b:00007ffffa5166e8 EFLAGS: 00000206 ORIG_RAX: 0000000000000127
[  466.322992] RAX: ffffffffffffffda RBX: 0000000000400460 RCX: 00000000004560f9
[  466.322999] RDX: 0000000000000003 RSI: 00000000200008c0 RDI: 0000000000000003
[  466.323007] RBP: 00007ffffa516700 R08: 0000000000000004 R09: 0000000000000000
[  466.323014] R10: 0000000000000000 R11: 0000000000000206 R12: 000000000040cb10
[  466.323021] R13: 0000000000000000 R14: 00000000006d7018 R15: 0000000000000000
[  466.323057]
[  466.323064] Allocated by task 2605:
[  466.335165]  save_stack+0x19/0x80
[  466.336240]  __kasan_kmalloc.constprop.8+0xa0/0xd0
[  466.337755]  kmem_cache_alloc+0xe8/0x320
[  466.339050]  getname_flags+0xca/0x560
[  466.340229]  user_path_at_empty+0x2c/0x50
[  466.341508]  vfs_statx+0xe6/0x190
[  466.342619]  __do_sys_newstat+0x81/0x100
[  466.343908]  do_syscall_64+0xc8/0x600
[  466.345303]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  466.347034]
[  466.347517] Freed by task 2605:
[  466.348471]  save_stack+0x19/0x80
[  466.349476]  __kasan_slab_free+0x12e/0x180
[  466.350726]  kmem_cache_free+0xc8/0x430
[  466.351874]  putname+0xe2/0x120
[  466.352921]  filename_lookup+0x257/0x3e0
[  466.354319]  vfs_statx+0xe6/0x190
[  466.355498]  __do_sys_newstat+0x81/0x100
[  466.356889]  do_syscall_64+0xc8/0x600
[  466.358037]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  466.359567]
[  466.360050] The buggy address belongs to the object at ffff888372139100
[  466.360050]  which belongs to the cache names_cache of size 4096
[  466.363735] The buggy address is located 336 bytes inside of
[  466.363735]  4096-byte region [ffff888372139100, ffff88837213a100)
[  466.367179] The buggy address belongs to the page:
[  466.368604] page:ffffea000dc84e00 refcount:1 mapcount:0 mapping:ffff8883df1b4f00 index:0x0 compound_mapcount: 0
[  466.371582] flags: 0x2fffff80010200(slab|head)
[  466.372910] raw: 002fffff80010200 dead000000000100 dead000000000122 ffff8883df1b4f00
[  466.375209] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[  466.377778] page dumped because: kasan: bad access detected
[  466.379730]
[  466.380288] Memory state around the buggy address:
[  466.381844]  ffff888372139100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.384009]  ffff888372139180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.386131] >ffff888372139200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.388257]                                                  ^
[  466.390234]  ffff888372139280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.392512]  ffff888372139300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  466.394667] ==================================================================

tun_chr_read_iter() accessed the memory which freed by free_netdev() called by tun_set_iff():

CPUA CPUB
tun_set_iff()
alloc_netdev_mqs()
tun_attach()
tun_chr_read_iter()
tun_get()
tun_do_read()
tun_ring_recv()
register_netdevice() <-- inject error
goto err_detach
tun_detach_all() <-- set RCV_SHUTDOWN
free_netdev() <-- called from
err_free_dev path
netdev_freemem() <-- free the memory
without check refcount
(In this path, the refcount cannot prevent
freeing the memory of dev, and the memory
will be used by dev_put() called by
tun_chr_read_iter() on CPUB.)
(Break from tun_ring_recv(), because RCV_SHUTDOWN is set)
tun_put()
dev_put() <-- use the memory
freed by netdev_freemem()

Put the publishing of tfile->tun after register_netdevice(), so tun_get() won't get the tun pointer that freed by err_detach path if register_netdevice() failed.

Fixes eb0fb363f920 ("tuntap: attach queue 0 before registering netdevice")

Reported-by Hulk Robot <[email protected]>

Signed-off-by Yang Yingliang <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/net/tun.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

drivers/net/tun.c +11 -5

@@ -630,7 +630,8 @@ static void tun_detach_all(struct net_de
 		module_put(THIS_MODULE);
 }
 
-static int tun_attach(struct tun_struct *tun, struct file *file, bool skip_filter)
+static int tun_attach(struct tun_struct *tun, struct file *file,
+		      bool skip_filter, bool publish_tun)
 {
 	struct tun_file *tfile = file->private_data;
 	struct net_device *dev = tun->dev;

@@ -672,7 +673,8 @@ static int tun_attach(struct tun_struct
 
 	tfile->queue_index = tun->numqueues;
 	tfile->socket.sk->sk_shutdown &= ~RCV_SHUTDOWN;
-	rcu_assign_pointer(tfile->tun, tun);
+	if (publish_tun)
+		rcu_assign_pointer(tfile->tun, tun);
 	rcu_assign_pointer(tun->tfiles[tun->numqueues], tfile);
 	tun->numqueues++;

@@ -2011,7 +2013,7 @@ static int tun_set_iff(struct net *net,
 		if (err < 0)
 			return err;
 
-		err = tun_attach(tun, file, ifr->ifr_flags & IFF_NOFILTER);
+		err = tun_attach(tun, file, ifr->ifr_flags & IFF_NOFILTER, true);
 		if (err < 0)
 			return err;

@@ -2100,13 +2102,17 @@ static int tun_set_iff(struct net *net,
 				       NETIF_F_HW_VLAN_STAG_TX);
 
 		INIT_LIST_HEAD(&tun->disabled);
-		err = tun_attach(tun, file, false);
+		err = tun_attach(tun, file, false, false);
 		if (err < 0)
 			goto err_free_flow;
 
 		err = register_netdevice(tun->dev);
 		if (err < 0)
 			goto err_detach;
+		/* free_netdev() won't check refcnt, to aovid race
+		 * with dev_put() we need publish tun after registration.
+		 */
+		rcu_assign_pointer(tfile->tun, tun);
 	}
 
 	netif_carrier_on(tun->dev);

@@ -2252,7 +2258,7 @@ static int tun_set_queue(struct file *fi
 		ret = security_tun_dev_attach_queue(tun->security);
 		if (ret < 0)
 			goto unlock;
-		ret = tun_attach(tun, file, false);
+		ret = tun_attach(tun, file, false, true);
 	} else if (ifr->ifr_flags & IFF_DETACH_QUEUE) {
 		tun = rtnl_dereference(tfile->tun);
 		if (!tun || !(tun->flags & IFF_MULTI_QUEUE) || tfile->detached)

Greg Kroah-Hartman

author maintainer

2019-09-18 06:33 UTC #14 lore raw

PATCH 14/45 btrfs: compression: add helper for type to string conversion

From: David Sterba <[email protected]>

commit e128f9c3f7242318e1c76d204c7ae32bc878b8c7 upstream.

There are several places opencoding this conversion, add a helper now that we have 3 compression algorithms.

Signed-off-by David Sterba <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/btrfs/compression.c |   15 +++++++++++++++
 fs/btrfs/compression.h |    2 ++
 2 files changed, 17 insertions(+)

fs/btrfs/compression.c +15 -0

@@ -43,6 +43,21 @@
 #include "extent_io.h"
 #include "extent_map.h"
 
+static const char* const btrfs_compress_types[] = { "", "zlib", "lzo", "zstd" };
+
+const char* btrfs_compress_type2str(enum btrfs_compression_type type)
+{
+	switch (type) {
+	case BTRFS_COMPRESS_ZLIB:
+	case BTRFS_COMPRESS_LZO:
+	case BTRFS_COMPRESS_ZSTD:
+	case BTRFS_COMPRESS_NONE:
+		return btrfs_compress_types[type];
+	}
+
+	return NULL;
+}
+
 static int btrfs_decompress_bio(struct compressed_bio *cb);
 
 static inline int compressed_bio_size(struct btrfs_fs_info *fs_info,

fs/btrfs/compression.h +2 -0

@@ -130,6 +130,8 @@ extern const struct btrfs_compress_op bt
 extern const struct btrfs_compress_op btrfs_lzo_compress;
 extern const struct btrfs_compress_op btrfs_zstd_compress;
 
+const char* btrfs_compress_type2str(enum btrfs_compression_type type);
+
 int btrfs_compress_heuristic(struct inode *inode, u64 start, u64 end);
 
 #endif

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #15 lore raw

PATCH 15/45 btrfs: correctly validate compression type

From: Johannes Thumshirn <[email protected]>

commit aa53e3bfac7205fb3a8815ac1c937fd6ed01b41e upstream.

Nikolay reported the following KASAN splat when running btrfs/048:

[ 1843.470920] ==================================================================
[ 1843.471971] BUG: KASAN: slab-out-of-bounds in strncmp+0x66/0xb0
[ 1843.472775] Read of size 1 at addr ffff888111e369e2 by task btrfs/3979

[ 1843.473904] CPU: 3 PID: 3979 Comm: btrfs Not tainted 5.2.0-rc3-default #536
[ 1843.475009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1843.476322] Call Trace:
[ 1843.476674]  dump_stack+0x7c/0xbb
[ 1843.477132]  ? strncmp+0x66/0xb0
[ 1843.477587]  print_address_description+0x114/0x320
[ 1843.478256]  ? strncmp+0x66/0xb0
[ 1843.478740]  ? strncmp+0x66/0xb0
[ 1843.479185]  __kasan_report+0x14e/0x192
[ 1843.479759]  ? strncmp+0x66/0xb0
[ 1843.480209]  kasan_report+0xe/0x20
[ 1843.480679]  strncmp+0x66/0xb0
[ 1843.481105]  prop_compression_validate+0x24/0x70
[ 1843.481798]  btrfs_xattr_handler_set_prop+0x65/0x160
[ 1843.482509]  __vfs_setxattr+0x71/0x90
[ 1843.483012]  __vfs_setxattr_noperm+0x84/0x130
[ 1843.483606]  vfs_setxattr+0xac/0xb0
[ 1843.484085]  setxattr+0x18c/0x230
[ 1843.484546]  ? vfs_setxattr+0xb0/0xb0
[ 1843.485048]  ? __mod_node_page_state+0x1f/0xa0
[ 1843.485672]  ? _raw_spin_unlock+0x24/0x40
[ 1843.486233]  ? __handle_mm_fault+0x988/0x1290
[ 1843.486823]  ? lock_acquire+0xb4/0x1e0
[ 1843.487330]  ? lock_acquire+0xb4/0x1e0
[ 1843.487842]  ? mnt_want_write_file+0x3c/0x80
[ 1843.488442]  ? debug_lockdep_rcu_enabled+0x22/0x40
[ 1843.489089]  ? rcu_sync_lockdep_assert+0xe/0x70
[ 1843.489707]  ? __sb_start_write+0x158/0x200
[ 1843.490278]  ? mnt_want_write_file+0x3c/0x80
[ 1843.490855]  ? __mnt_want_write+0x98/0xe0
[ 1843.491397]  __x64_sys_fsetxattr+0xba/0xe0
[ 1843.492201]  ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 1843.493201]  do_syscall_64+0x6c/0x230
[ 1843.493988]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1843.495041] RIP: 0033:0x7fa7a8a7707a
[ 1843.495819] Code: 48 8b 0d 21 de 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 be 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ee dd 2b 00 f7 d8 64 89 01 48
[ 1843.499203] RSP: 002b:00007ffcb73bca38 EFLAGS: 00000202 ORIG_RAX: 00000000000000be
[ 1843.500210] RAX: ffffffffffffffda RBX: 00007ffcb73bda9d RCX: 00007fa7a8a7707a
[ 1843.501170] RDX: 00007ffcb73bda9d RSI: 00000000006dc050 RDI: 0000000000000003
[ 1843.502152] RBP: 00000000006dc050 R08: 0000000000000000 R09: 0000000000000000
[ 1843.503109] R10: 0000000000000002 R11: 0000000000000202 R12: 00007ffcb73bda91
[ 1843.504055] R13: 0000000000000003 R14: 00007ffcb73bda82 R15: ffffffffffffffff

[ 1843.505268] Allocated by task 3979:
[ 1843.505771]  save_stack+0x19/0x80
[ 1843.506211]  __kasan_kmalloc.constprop.5+0xa0/0xd0
[ 1843.506836]  setxattr+0xeb/0x230
[ 1843.507264]  __x64_sys_fsetxattr+0xba/0xe0
[ 1843.507886]  do_syscall_64+0x6c/0x230
[ 1843.508429]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

[ 1843.509558] Freed by task 0:
[ 1843.510188] (stack is not available)

[ 1843.511309] The buggy address belongs to the object at ffff888111e369e0
                which belongs to the cache kmalloc-8 of size 8
[ 1843.514095] The buggy address is located 2 bytes inside of
                8-byte region [ffff888111e369e0, ffff888111e369e8)
[ 1843.516524] The buggy address belongs to the page:
[ 1843.517561] page:ffff88813f478d80 refcount:1 mapcount:0 mapping:ffff88811940c300 index:0xffff888111e373b8 compound_mapcount: 0
[ 1843.519993] flags: 0x4404000010200(slab|head)
[ 1843.520951] raw: 0004404000010200 ffff88813f48b008 ffff888119403d50 ffff88811940c300
[ 1843.522616] raw: ffff888111e373b8 000000000016000f 00000001ffffffff 0000000000000000
[ 1843.524281] page dumped because: kasan: bad access detected

[ 1843.525936] Memory state around the buggy address:
[ 1843.526975]  ffff888111e36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.528479]  ffff888111e36900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.530138] >ffff888111e36980: fc fc fc fc fc fc fc fc fc fc fc fc 02 fc fc fc
[ 1843.531877]                                                        ^
[ 1843.533287]  ffff888111e36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.534874]  ffff888111e36a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.536468] ==================================================================

This is caused by supplying a too short compression value ('lz') in the test-case and comparing it to 'lzo' with strncmp() and a length of 3. strncmp() read past the 'lz' when looking for the 'o' and thus caused an out-of-bounds read.

Introduce a new check 'btrfs_compress_is_valid_type()' which not only checks the user-supplied value against known compression types, but also employs checks for too short values.

Reported-by Nikolay Borisov <[email protected]>

Fixes 272e5326c783 ("btrfs: prop: fix vanished compression property after failed set")

CC [email protected] # 5.1+

Reviewed-by Nikolay Borisov <[email protected]>

Signed-off-by Johannes Thumshirn <[email protected]>

Reviewed-by David Sterba <[email protected]>

Signed-off-by David Sterba <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/btrfs/compression.c |   16 ++++++++++++++++
 fs/btrfs/compression.h |    1 +
 fs/btrfs/props.c       |    6 +-----
 3 files changed, 18 insertions(+), 5 deletions(-)

fs/btrfs/compression.c +16 -0

@@ -58,6 +58,22 @@ const char* btrfs_compress_type2str(enum
 	return NULL;
 }
 
+bool btrfs_compress_is_valid_type(const char *str, size_t len)
+{
+	int i;
+
+	for (i = 1; i < ARRAY_SIZE(btrfs_compress_types); i++) {
+		size_t comp_len = strlen(btrfs_compress_types[i]);
+
+		if (len < comp_len)
+			continue;
+
+		if (!strncmp(btrfs_compress_types[i], str, comp_len))
+			return true;
+	}
+	return false;
+}
+
 static int btrfs_decompress_bio(struct compressed_bio *cb);
 
 static inline int compressed_bio_size(struct btrfs_fs_info *fs_info,

fs/btrfs/compression.h +1 -0

@@ -131,6 +131,7 @@ extern const struct btrfs_compress_op bt
 extern const struct btrfs_compress_op btrfs_zstd_compress;
 
 const char* btrfs_compress_type2str(enum btrfs_compression_type type);
+bool btrfs_compress_is_valid_type(const char *str, size_t len);
 
 int btrfs_compress_heuristic(struct inode *inode, u64 start, u64 end);

fs/btrfs/props.c +1 -5

@@ -386,11 +386,7 @@ int btrfs_subvol_inherit_props(struct bt
 
 static int prop_compression_validate(const char *value, size_t len)
 {
-	if (!strncmp("lzo", value, 3))
-		return 0;
-	else if (!strncmp("zlib", value, 4))
-		return 0;
-	else if (!strncmp("zstd", value, 4))
+	if (btrfs_compress_is_valid_type(value, len))
 		return 0;
 
 	return -EINVAL;

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #16 lore raw

PATCH 16/45 Revert "MIPS: SiByte: Enable swiotlb for SWARM, LittleSur and BigSur"

From: Greg Kroah-Hartman <[email protected]>

This reverts commit c85acbf72786a5901a2170b2145761ed7cf06429 which is commit e4849aff1e169b86c561738daf8ff020e9de1011 upstream

Guenter writes:
Upstream commit e4849aff1e16 ("MIPS: SiByte: Enable swiotlb for SWARM, LittleSur and BigSur") results in build failures in v4.4.y and v4.14.y.

make bigsur_defconfig:

warning: (SIBYTE_SWARM && SIBYTE_SENTOSA && SIBYTE_BIGSUR && SWIOTLB_XEN && AMD_IOMMU) selects SWIOTLB which has unmet direct dependencies (CAVIUM_OCTEON_SOC || MACH_LOONGSON64 && CPU_LOONGSON3 || NLM_XLP_BOARD || NLM_XLR_BOARD)
warning: (SIBYTE_SWARM && SIBYTE_SENTOSA && SIBYTE_BIGSUR && SWIOTLB_XEN && AMD_IOMMU) selects SWIOTLB which has unmet direct dependencies (CAVIUM_OCTEON_SOC || MACH_LOONGSON64 && CPU_LOONGSON3 || NLM_XLP_BOARD || NLM_XLR_BOARD)

and the actual build:

lib/swiotlb.o: In function `swiotlb_tbl_map_single':
(.text+0x1c0): undefined reference to `iommu_is_span_boundary' Makefile:1021: recipe for target 'vmlinux' failed

Reported-by Guenter Roeck <[email protected]>

Cc Maciej W. Rozycki <[email protected]>

Cc Paul Burton <[email protected]>

Cc Christoph Hellwig <[email protected]>

Cc Ralf Baechle <[email protected]>

Cc Sasha Levin <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/mips/Kconfig                |    3 ---
 arch/mips/sibyte/common/Makefile |    1 -
 arch/mips/sibyte/common/dma.c    |   14 --------------
 3 files changed, 18 deletions(-)
 delete mode 100644 arch/mips/sibyte/common/dma.c

arch/mips/Kconfig +0 -3

@@ -800,7 +800,6 @@ config SIBYTE_SWARM
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select ZONE_DMA32 if 64BIT
-	select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
 
 config SIBYTE_LITTLESUR
 	bool "Sibyte BCM91250C2-LittleSur"

@@ -823,7 +822,6 @@ config SIBYTE_SENTOSA
 	select SYS_HAS_CPU_SB1
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
 
 config SIBYTE_BIGSUR
 	bool "Sibyte BCM91480B-BigSur"

@@ -837,7 +835,6 @@ config SIBYTE_BIGSUR
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select ZONE_DMA32 if 64BIT
-	select SWIOTLB if ARCH_DMA_ADDR_T_64BIT && PCI
 
 config SNI_RM
 	bool "SNI RM200/300/400"

arch/mips/sibyte/common/Makefile +0 -1

@@ -1,5 +1,4 @@
 obj-y := cfe.o
-obj-$(CONFIG_SWIOTLB)			+= dma.o
 obj-$(CONFIG_SIBYTE_BUS_WATCHER)	+= bus_watcher.o
 obj-$(CONFIG_SIBYTE_CFE_CONSOLE)	+= cfe_console.o
 obj-$(CONFIG_SIBYTE_TBPROF)		+= sb_tbprof.o

arch/mips/sibyte/common/dma.c deleted +0 ~~-14~~

@@ -1,14 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *	DMA support for Broadcom SiByte platforms.
- *
- *	Copyright (c) 2018  Maciej W. Rozycki
- */
-
-#include <linux/swiotlb.h>
-#include <asm/bootinfo.h>
-
-void __init plat_swiotlb_setup(void)
-{
-	swiotlb_init(1);
-}

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #17 lore raw

PATCH 17/45 gpiolib: acpi: Add gpiolib_acpi_run_edge_events_on_boot option and blacklist

From: Hans de Goede <[email protected]>

commit 61f7f7c8f978b1c0d80e43c83b7d110ca0496eb4 upstream.

Another day; another DSDT bug we need to workaround...

Since commit ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot") we call _AEI edge handlers at boot.

In some rare cases this causes problems. One example of this is the Minix Neo Z83-4 mini PC, this device has a clear DSDT bug where it has some copy and pasted code for dealing with Micro USB-B connector host/device role switching, while the mini PC does not even have a micro-USB connector. This code, which should not be there, messes with the DDC data pin from the HDMI connector (switching it to GPIO mode) breaking HDMI support.

To avoid problems like this, this commit adds a new gpiolib_acpi.run_edge_events_on_boot kernel commandline option, which allows disabling the running of _AEI edge event handlers at boot.

The default value is -1/auto which uses a DMI based blacklist, the initial version of this blacklist contains the Neo Z83-4 fixing the HDMI breakage.

Cc Daniel Drake <[email protected]>

Cc Ian W MORRISON <[email protected]>

Reported-by Ian W MORRISON <[email protected]>

Fixes ca876c7483b6 ("gpiolib-acpi: make sure we trigger edge events at least once on boot")

Signed-off-by Hans de Goede <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Acked-by Mika Westerberg <[email protected]>

Reviewed-by Andy Shevchenko <[email protected]>

Tested-by Ian W MORRISON <[email protected]>

Signed-off-by Linus Walleij <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/gpio/gpiolib-acpi.c |   42 ++++++++++++++++++++++++++++++++++++++----
 1 file changed, 38 insertions(+), 4 deletions(-)

drivers/gpio/gpiolib-acpi.c +38 -4

@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/dmi.h>
 #include <linux/errno.h>
 #include <linux/gpio.h>
 #include <linux/gpio/consumer.h>

@@ -23,6 +24,11 @@
 
 #include "gpiolib.h"
 
+static int run_edge_events_on_boot = -1;
+module_param(run_edge_events_on_boot, int, 0444);
+MODULE_PARM_DESC(run_edge_events_on_boot,
+		 "Run edge _AEI event-handlers at boot: 0=no, 1=yes, -1=auto");
+
 /**
  * struct acpi_gpio_event - ACPI GPIO event handler data
  *

@@ -231,10 +237,13 @@ static void acpi_gpiochip_request_irq(st
 	event->irq_requested = true;
 
 	/* Make sure we trigger the initial state of edge-triggered IRQs */
-	value = gpiod_get_raw_value_cansleep(event->desc);
-	if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) ||
-	    ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0))
-		event->handler(event->irq, event);
+	if (run_edge_events_on_boot &&
+	    (event->irqflags & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING))) {
+		value = gpiod_get_raw_value_cansleep(event->desc);
+		if (((event->irqflags & IRQF_TRIGGER_RISING) && value == 1) ||
+		    ((event->irqflags & IRQF_TRIGGER_FALLING) && value == 0))
+			event->handler(event->irq, event);
+	}
 }
 
 static void acpi_gpiochip_request_irqs(struct acpi_gpio_chip *acpi_gpio)

@@ -1302,3 +1311,28 @@ static int acpi_gpio_handle_deferred_req
 }
 /* We must use _sync so that this runs after the first deferred_probe run */
 late_initcall_sync(acpi_gpio_handle_deferred_request_irqs);
+
+static const struct dmi_system_id run_edge_events_on_boot_blacklist[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MINIX"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
+		}
+	},
+	{} /* Terminating entry */
+};
+
+static int acpi_gpio_setup_params(void)
+{
+	if (run_edge_events_on_boot < 0) {
+		if (dmi_check_system(run_edge_events_on_boot_blacklist))
+			run_edge_events_on_boot = 0;
+		else
+			run_edge_events_on_boot = 1;
+	}
+
+	return 0;
+}
+
+/* Directly after dmi_setup() which runs as core_initcall() */
+postcore_initcall(acpi_gpio_setup_params);

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #18 lore raw

PATCH 18/45 gpio: fix line flag validation in linehandle_create

From: Kent Gibson <[email protected]>

commit e95fbc130a162ba9ad956311b95aa0da269eea48 upstream.

linehandle_create should not allow both GPIOHANDLE_REQUEST_INPUT and GPIOHANDLE_REQUEST_OUTPUT to be set.

Fixes d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")

Cc stable <[email protected]>

Signed-off-by Kent Gibson <[email protected]>

Signed-off-by Bartosz Golaszewski <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/gpio/gpiolib.c |   12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

drivers/gpio/gpiolib.c +11 -1

@@ -444,12 +444,23 @@ static int linehandle_create(struct gpio
 	struct linehandle_state *lh;
 	struct file *file;
 	int fd, i, count = 0, ret;
+	u32 lflags;
 
 	if (copy_from_user(&handlereq, ip, sizeof(handlereq)))
 		return -EFAULT;
 	if ((handlereq.lines == 0) || (handlereq.lines > GPIOHANDLES_MAX))
 		return -EINVAL;
 
+	lflags = handlereq.flags;
+
+	/*
+	 * Do not allow both INPUT & OUTPUT flags to be set as they are
+	 * contradictory.
+	 */
+	if ((lflags & GPIOHANDLE_REQUEST_INPUT) &&
+	    (lflags & GPIOHANDLE_REQUEST_OUTPUT))
+		return -EINVAL;
+
 	lh = kzalloc(sizeof(*lh), GFP_KERNEL);
 	if (!lh)
 		return -ENOMEM;

@@ -470,7 +481,6 @@ static int linehandle_create(struct gpio
 	/* Request each GPIO */
 	for (i = 0; i < handlereq.lines; i++) {
 		u32 offset = handlereq.lineoffsets[i];
-		u32 lflags = handlereq.flags;
 		struct gpio_desc *desc;
 
 		if (offset >= gdev->ngpio) {

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #19 lore raw

PATCH 19/45 gpio: fix line flag validation in lineevent_create

From: Kent Gibson <[email protected]>

commit 5ca2f54b597c816df54ff1b28eb99cf7262b955d upstream.

lineevent_create should not allow any of GPIOHANDLE_REQUEST_OUTPUT, GPIOHANDLE_REQUEST_OPEN_DRAIN or GPIOHANDLE_REQUEST_OPEN_SOURCE to be set.

Fixes d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")

Cc stable <[email protected]>

Signed-off-by Kent Gibson <[email protected]>

Signed-off-by Bartosz Golaszewski <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/gpio/gpiolib.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

drivers/gpio/gpiolib.c +3 -5

@@ -815,7 +815,9 @@ static int lineevent_create(struct gpio_
 	}
 
 	/* This is just wrong: we don't look for events on output lines */
-	if (lflags & GPIOHANDLE_REQUEST_OUTPUT) {
+	if ((lflags & GPIOHANDLE_REQUEST_OUTPUT) ||
+	    (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN) ||
+	    (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)) {
 		ret = -EINVAL;
 		goto out_free_label;
 	}

@@ -829,10 +831,6 @@ static int lineevent_create(struct gpio_
 
 	if (lflags & GPIOHANDLE_REQUEST_ACTIVE_LOW)
 		set_bit(FLAG_ACTIVE_LOW, &desc->flags);
-	if (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN)
-		set_bit(FLAG_OPEN_DRAIN, &desc->flags);
-	if (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)
-		set_bit(FLAG_OPEN_SOURCE, &desc->flags);
 
 	ret = gpiod_direction_input(desc);
 	if (ret)

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #20 lore raw

PATCH 20/45 Btrfs: fix assertion failure during fsync and use of stale transaction

From: Filipe Manana <[email protected]>

commit 410f954cb1d1c79ae485dd83a175f21954fd87cd upstream.

Sometimes when fsync'ing a file we need to log that other inodes exist and when we need to do that we acquire a reference on the inodes and then drop that reference using iput() after logging them.

That generally is not a problem except if we end up doing the final iput() (dropping the last reference) on the inode and that inode has a link count of 0, which can happen in a very short time window if the logging path gets a reference on the inode while it's being unlinked.

In that case we end up getting the eviction callback, btrfs_evict_inode(), invoked through the iput() call chain which needs to drop all of the inode's items from its subvolume btree, and in order to do that, it needs to join a transaction at the helper function evict_refill_and_join(). However because the task previously started a transaction at the fsync handler, btrfs_sync_file(), it has current->journal_info already pointing to a transaction handle and therefore evict_refill_and_join() will get that transaction handle from btrfs_join_transaction(). From this point on, two different problems can happen:

1) evict_refill_and_join() will often change the transaction handle's block reserve (->block_rsv) and set its ->bytes_reserved field to a value greater than 0. If evict_refill_and_join() never commits the transaction, the eviction handler ends up decreasing the reference count (->use_count) of the transaction handle through the call to btrfs_end_transaction(), and after that point we have a transaction handle with a NULL ->block_rsv (which is the value prior to the transaction join from evict_refill_and_join()) and a ->bytes_reserved value greater than 0. If after the eviction/iput completes the inode logging path hits an error or it decides that it must fallback to a transaction commit, the btrfs fsync handle, btrfs_sync_file(), gets a non-zero value from btrfs_log_dentry_safe(), and because of that non-zero value it tries to commit the transaction using a handle with a NULL ->block_rsv and a non-zero ->bytes_reserved value. This makes the transaction commit hit an assertion failure at btrfs_trans_release_metadata() because ->bytes_reserved is not zero but the ->block_rsv is NULL. The produced stack trace for that is like the following:

   [192922.917158] assertion failed: !trans->bytes_reserved, file: fs/btrfs/transaction.c, line: 816
   [192922.917553] ------------[ cut here ]------------
   [192922.917922] kernel BUG at fs/btrfs/ctree.h:3532!
   [192922.918310] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
   [192922.918666] CPU: 2 PID: 883 Comm: fsstress Tainted: G        W         5.1.4-btrfs-next-47 #1
   [192922.919035] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
   [192922.919801] RIP: 0010:assfail.constprop.25+0x18/0x1a [btrfs]
   (...)
   [192922.920925] RSP: 0018:ffffaebdc8a27da8 EFLAGS: 00010286
   [192922.921315] RAX: 0000000000000051 RBX: ffff95c9c16a41c0 RCX: 0000000000000000
   [192922.921692] RDX: 0000000000000000 RSI: ffff95cab6b16838 RDI: ffff95cab6b16838
   [192922.922066] RBP: ffff95c9c16a41c0 R08: 0000000000000000 R09: 0000000000000000
   [192922.922442] R10: ffffaebdc8a27e70 R11: 0000000000000000 R12: ffff95ca731a0980
   [192922.922820] R13: 0000000000000000 R14: ffff95ca84c73338 R15: ffff95ca731a0ea8
   [192922.923200] FS:  00007f337eda4e80(0000) GS:ffff95cab6b00000(0000) knlGS:0000000000000000
   [192922.923579] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   [192922.923948] CR2: 00007f337edad000 CR3: 00000001e00f6002 CR4: 00000000003606e0
   [192922.924329] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
   [192922.924711] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
   [192922.925105] Call Trace:
   [192922.925505]  btrfs_trans_release_metadata+0x10c/0x170 [btrfs]
   [192922.925911]  btrfs_commit_transaction+0x3e/0xaf0 [btrfs]
   [192922.926324]  btrfs_sync_file+0x44c/0x490 [btrfs]
   [192922.926731]  do_fsync+0x38/0x60
   [192922.927138]  __x64_sys_fdatasync+0x13/0x20
   [192922.927543]  do_syscall_64+0x60/0x1c0
   [192922.927939]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
   (...)
   [192922.934077] ---[ end trace f00808b12068168f ]---

2) If evict_refill_and_join() decides to commit the transaction, it will be able to do it, since the nested transaction join only increments the transaction handle's ->use_count reference counter and it does not prevent the transaction from getting committed. This means that after eviction completes, the fsync logging path will be using a transaction handle that refers to an already committed transaction. What happens when using such a stale transaction can be unpredictable, we are at least having a use-after-free on the transaction handle itself, since the transaction commit will call kmem_cache_free() against the handle regardless of its ->use_count value, or we can end up silently losing all the updates to the log tree after that iput() in the logging path, or using a transaction handle that in the meanwhile was allocated to another task for a new transaction, etc, pretty much unpredictable what can happen.

In order to fix both of them, instead of using iput() during logging, use btrfs_add_delayed_iput(), so that the logging path of fsync never drops the last reference on an inode, that step is offloaded to a safe context (usually the cleaner kthread).

The assertion failure issue was sporadically triggered by the test case generic/475 from fstests, which loads the dm error target while fsstress is running, which lead to fsync failing while logging inodes with -EIO errors and then trying later to commit the transaction, triggering the assertion failure.

CC [email protected] # 4.4+

Reviewed-by Josef Bacik <[email protected]>

Signed-off-by Filipe Manana <[email protected]>

Signed-off-by David Sterba <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/btrfs/tree-log.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

fs/btrfs/tree-log.c +4 -4

@@ -5122,7 +5122,7 @@ again:
 						BTRFS_I(other_inode),
 						LOG_OTHER_INODE, 0, LLONG_MAX,
 						ctx);
-				iput(other_inode);
+				btrfs_add_delayed_iput(other_inode);
 				if (err)
 					goto out_unlock;
 				else

@@ -5539,7 +5539,7 @@ process_leaf:
 			}
 
 			if (btrfs_inode_in_log(BTRFS_I(di_inode), trans->transid)) {
-				iput(di_inode);
+				btrfs_add_delayed_iput(di_inode);
 				break;
 			}

@@ -5551,7 +5551,7 @@ process_leaf:
 			if (!ret &&
 			    btrfs_must_commit_transaction(trans, BTRFS_I(di_inode)))
 				ret = 1;
-			iput(di_inode);
+			btrfs_add_delayed_iput(di_inode);
 			if (ret)
 				goto next_dir_inode;
 			if (ctx->log_new_dentries) {

@@ -5698,7 +5698,7 @@ static int btrfs_log_all_parents(struct
 			if (!ret && ctx && ctx->log_new_dentries)
 				ret = log_new_dir_dentries(trans, root,
 						   BTRFS_I(dir_inode), ctx);
-			iput(dir_inode);
+			btrfs_add_delayed_iput(dir_inode);
 			if (ret)
 				goto out;
 		}

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #21 lore raw

PATCH 21/45 genirq: Prevent NULL pointer dereference in resend_irqs()

From: Yunfeng Ye <[email protected]>

commit eddf3e9c7c7e4d0707c68d1bb22cc6ec8aef7d4a upstream.

The following crash was observed:

  Unable to handle kernel NULL pointer dereference at 0000000000000158
  Internal error: Oops: 96000004 [#1] SMP
  pc : resend_irqs+0x68/0xb0
  lr : resend_irqs+0x64/0xb0
  ...
  Call trace:
   resend_irqs+0x68/0xb0
   tasklet_action_common.isra.6+0x84/0x138
   tasklet_action+0x2c/0x38
   __do_softirq+0x120/0x324
   run_ksoftirqd+0x44/0x60
   smpboot_thread_fn+0x1ac/0x1e8
   kthread+0x134/0x138
   ret_from_fork+0x10/0x18

The reason for this is that the interrupt resend mechanism happens in soft interrupt context, which is a asynchronous mechanism versus other operations on interrupts. free_irq() does not take resend handling into account. Thus, the irq descriptor might be already freed before the resend tasklet is executed. resend_irqs() does not check the return value of the interrupt descriptor lookup and derefences the return value unconditionally.

1):
__setup_irq
irq_startup
check_irq_resend // activate softirq to handle resend irq
2):
irq_domain_free_irqs

    irq_free_descs
      free_desc
        call_rcu(&desc->rcu, delayed_free_desc)

3):
__do_softirq
tasklet_action
resend_irqs
desc = irq_to_desc(irq) desc->handle_irq(desc) // desc is NULL --> Ooops

Fix this by adding a NULL pointer check in resend_irqs() before derefencing the irq descriptor.

Fixes a4633adcdbc1 ("[PATCH] genirq: add genirq sw IRQ-retrigger")

Signed-off-by Yunfeng Ye <[email protected]>

Signed-off-by Thomas Gleixner <[email protected]>

Reviewed-by Zhiqiang Liu <[email protected]>

Link https://lkml.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 kernel/irq/resend.c |    2 ++
 1 file changed, 2 insertions(+)

kernel/irq/resend.c +2 -0

@@ -38,6 +38,8 @@ static void resend_irqs(unsigned long ar
 		irq = find_first_bit(irqs_resend, nr_irqs);
 		clear_bit(irq, irqs_resend);
 		desc = irq_to_desc(irq);
+		if (!desc)
+			continue;
 		local_irq_disable();
 		desc->handle_irq(desc);
 		local_irq_enable();

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #22 lore raw

PATCH 22/45 KVM: s390: Do not leak kernel stack data in the KVM_S390_INTERRUPT ioctl

From: Thomas Huth <[email protected]>

commit 53936b5bf35e140ae27e4bbf0447a61063f400da upstream.

When the userspace program runs the KVM_S390_INTERRUPT ioctl to inject an interrupt, we convert them from the legacy struct kvm_s390_interrupt to the new struct kvm_s390_irq via the s390int_to_s390irq() function. However, this function does not take care of all types of interrupts that we can inject into the guest later (see do_inject_vcpu()). Since we do not clear out the s390irq values before calling s390int_to_s390irq(), there is a chance that we copy random data from the kernel stack which could be leaked to the userspace later.

Specifically, the problem exists with the KVM_S390_INT_PFAULT_INIT
interrupt: s390int_to_s390irq() does not handle it, and the function __inject_pfault_init() later copies irq->u.ext which contains the random kernel stack data. This data can then be leaked either to the guest memory in __deliver_pfault_init(), or the userspace might retrieve it directly with the KVM_S390_GET_IRQ_STATE ioctl.

Fix it by handling that interrupt type in s390int_to_s390irq(), too, and by making sure that the s390irq struct is properly pre-initialized. And while we're at it, make sure that s390int_to_s390irq() now directly returns -EINVAL for unknown interrupt types, so that we immediately get a proper error code in case we add more interrupt types to do_inject_vcpu() without updating s390int_to_s390irq() sometime in the future.

Link https://lore.kernel.org/kvm/[email protected] open here

Reviewed-by David Hildenbrand <[email protected]>

Reviewed-by Christian Borntraeger <[email protected]>

Reviewed-by Janosch Frank <[email protected]>

Signed-off-by Thomas Huth <[email protected]>

Signed-off-by Christian Borntraeger <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/s390/kvm/interrupt.c |   10 ++++++++++
 arch/s390/kvm/kvm-s390.c  |    2 +-
 2 files changed, 11 insertions(+), 1 deletion(-)

arch/s390/kvm/interrupt.c +10 -0

@@ -1701,6 +1701,16 @@ int s390int_to_s390irq(struct kvm_s390_i
 	case KVM_S390_MCHK:
 		irq->u.mchk.mcic = s390int->parm64;
 		break;
+	case KVM_S390_INT_PFAULT_INIT:
+		irq->u.ext.ext_params = s390int->parm;
+		irq->u.ext.ext_params2 = s390int->parm64;
+		break;
+	case KVM_S390_RESTART:
+	case KVM_S390_INT_CLOCK_COMP:
+	case KVM_S390_INT_CPU_TIMER:
+		break;
+	default:
+		return -EINVAL;
 	}
 	return 0;
 }

arch/s390/kvm/kvm-s390.c +1 -1

@@ -3730,7 +3730,7 @@ long kvm_arch_vcpu_ioctl(struct file *fi
 	}
 	case KVM_S390_INTERRUPT: {
 		struct kvm_s390_interrupt s390int;
-		struct kvm_s390_irq s390irq;
+		struct kvm_s390_irq s390irq = {};
 
 		r = -EFAULT;
 		if (copy_from_user(&s390int, argp, sizeof(s390int)))

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #23 lore raw

PATCH 23/45 KVM: x86: work around leak of uninitialized stack contents

From: Fuqian Huang <[email protected]>

commit 541ab2aeb28251bf7135c7961f3a6080eebcc705 upstream.

Emulation of VMPTRST can incorrectly inject a page fault when passed an operand that points to an MMIO address. The page fault will use uninitialized kernel stack memory as the CR2 and error code.

The right behavior would be to abort the VM with a KVM_EXIT_INTERNAL_ERROR exit to userspace; however, it is not an easy fix, so for now just ensure that the error code and CR2 are zero.

Signed-off-by Fuqian Huang <[email protected]>

[add comment]

Signed-off-by Paolo Bonzini <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/x86/kvm/x86.c |    7 +++++++
 1 file changed, 7 insertions(+)

arch/x86/kvm/x86.c +7 -0

@@ -4721,6 +4721,13 @@ int kvm_write_guest_virt_system(struct k
 	/* kvm_write_guest_virt_system can pull in tons of pages. */
 	vcpu->arch.l1tf_flush_l1d = true;
 
+	/*
+	 * FIXME: this should call handle_emulation_failure if X86EMUL_IO_NEEDED
+	 * is returned, but our callers are not ready for that and they blindly
+	 * call kvm_inject_page_fault.  Ensure that they at least do not leak
+	 * uninitialized kernel stack memory into cr2 and error code.
+	 */
+	memset(exception, 0, sizeof(*exception));
 	return kvm_write_guest_virt_helper(addr, val, bytes, vcpu,
 					   PFERR_WRITE_MASK, exception);
 }

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #24 lore raw

PATCH 24/45 KVM: nVMX: handle page fault in vmread

From: Paolo Bonzini <[email protected]>

commit f7eea636c3d505fe6f1d1066234f1aaf7171b681 upstream.

The implementation of vmread to memory is still incomplete, as it lacks the ability to do vmread to I/O memory just like vmptrst.

Signed-off-by Paolo Bonzini <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/x86/kvm/vmx.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

arch/x86/kvm/vmx.c +5 -2

@@ -7996,6 +7996,7 @@ static int handle_vmread(struct kvm_vcpu
 	unsigned long exit_qualification = vmcs_readl(EXIT_QUALIFICATION);
 	u32 vmx_instruction_info = vmcs_read32(VMX_INSTRUCTION_INFO);
 	gva_t gva = 0;
+	struct x86_exception e;
 
 	if (!nested_vmx_check_permission(vcpu))
 		return 1;

@@ -8023,8 +8024,10 @@ static int handle_vmread(struct kvm_vcpu
 				vmx_instruction_info, true, &gva))
 			return 1;
 		/* _system ok, nested_vmx_check_permission has verified cpl=0 */
-		kvm_write_guest_virt_system(vcpu, gva, &field_value,
-					    (is_long_mode(vcpu) ? 8 : 4), NULL);
+		if (kvm_write_guest_virt_system(vcpu, gva, &field_value,
+						(is_long_mode(vcpu) ? 8 : 4),
+						NULL))
+			kvm_inject_page_fault(vcpu, &e);
 	}
 
 	nested_vmx_succeed(vcpu);

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #25 lore raw

PATCH 25/45 MIPS: VDSO: Prevent use of smp_processor_id()

From: Paul Burton <[email protected]>

commit 351fdddd366245c0fb4636f32edfb4198c8d6b8c upstream.

VDSO code should not be using smp_processor_id(), since it is executed in user mode.
Introduce a VDSO-specific path which will cause a compile-time or link-time error (depending upon support for __compiletime_error) if the VDSO ever incorrectly attempts to use smp_processor_id().

[Matt Redfearn <[email protected]>: Move before change to smp_processor_id in series]

Signed-off-by Paul Burton <[email protected]>

Signed-off-by Matt Redfearn <[email protected]>

Patchwork: https://patchwork.linux-mips.org/patch/17932/

Cc Ralf Baechle <[email protected]>

Cc James Hogan <[email protected]>

Cc Guenter Roeck <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/mips/include/asm/smp.h |   12 +++++++++++-
 arch/mips/vdso/Makefile     |    3 ++-
 2 files changed, 13 insertions(+), 2 deletions(-)

arch/mips/include/asm/smp.h +11 -1

@@ -25,7 +25,17 @@ extern cpumask_t cpu_sibling_map[];
 extern cpumask_t cpu_core_map[];
 extern cpumask_t cpu_foreign_map[];
 
-#define raw_smp_processor_id() (current_thread_info()->cpu)
+static inline int raw_smp_processor_id(void)
+{
+#if defined(__VDSO__)
+	extern int vdso_smp_processor_id(void)
+		__compiletime_error("VDSO should not call smp_processor_id()");
+	return vdso_smp_processor_id();
+#else
+	return current_thread_info()->cpu;
+#endif
+}
+#define raw_smp_processor_id raw_smp_processor_id
 
 /* Map from cpu id to sequential logical cpu number.  This will only
    not be idempotent when cpus failed to come on-line.	*/

arch/mips/vdso/Makefile +2 -1

@@ -7,7 +7,8 @@ ccflags-vdso := \
 	$(filter -I%,$(KBUILD_CFLAGS)) \
 	$(filter -E%,$(KBUILD_CFLAGS)) \
 	$(filter -mmicromips,$(KBUILD_CFLAGS)) \
-	$(filter -march=%,$(KBUILD_CFLAGS))
+	$(filter -march=%,$(KBUILD_CFLAGS)) \
+	-D__VDSO__
 cflags-vdso := $(ccflags-vdso) \
 	$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \
 	-O2 -g -fPIC -fno-strict-aliasing -fno-common -fno-builtin -G 0 \

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #26 lore raw

PATCH 26/45 MIPS: VDSO: Use same -m%-float cflag as the kernel proper

From: Paul Burton <[email protected]>

commit 0648e50e548d881d025b9419a1a168753c8e2bf7 upstream.

The MIPS VDSO build currently doesn't provide the -msoft-float flag to the compiler as the kernel proper does. This results in an attempt to use the compiler's default floating point configuration, which can be problematic in cases where this is incompatible with the target CPU's -march= flag. For example decstation_defconfig fails to build using toolchains in which gcc was configured --with-fp-32=xx with the following error:

LDS arch/mips/vdso/vdso.lds
cc1: error: '-march=r3000' requires '-mfp32'
make[2]: *** [scripts/Makefile.build:379: arch/mips/vdso/vdso.lds] Error 1

The kernel proper avoids this error because we build with the -msoft-float compiler flag, rather than using the compiler's default. Pass this flag through to the VDSO build so that it too becomes agnostic to the toolchain's floating point configuration.

Note that this is filtered out from KBUILD_CFLAGS rather than simply always using -msoft-float such that if we switch the kernel to use -mno-float in the future the VDSO will automatically inherit the change.

The VDSO doesn't actually include any floating point code, and its .MIPS.abiflags section is already manually generated to specify that it's compatible with any floating point ABI. As such this change should have no effect on the resulting VDSO, apart from fixing the build failure for affected toolchains.

Signed-off-by Paul Burton <[email protected]>

Reported-by Kevin Hilman <[email protected]>

Reported-by Guenter Roeck <[email protected]>

Tested-by Kevin Hilman <[email protected]>

Fixes ebb5e78cc634 ("MIPS: Initial implementation of a VDSO")

Cc Maciej W. Rozycki <[email protected]>

Cc [email protected] # v4.4+

Cc Guenter Roeck <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/mips/vdso/Makefile |    1 +
 1 file changed, 1 insertion(+)

arch/mips/vdso/Makefile +1 -0

@@ -8,6 +8,7 @@ ccflags-vdso := \
 	$(filter -E%,$(KBUILD_CFLAGS)) \
 	$(filter -mmicromips,$(KBUILD_CFLAGS)) \
 	$(filter -march=%,$(KBUILD_CFLAGS)) \
+	$(filter -m%-float,$(KBUILD_CFLAGS)) \
 	-D__VDSO__
 cflags-vdso := $(ccflags-vdso) \
 	$(filter -W%,$(filter-out -Wa$(comma)%,$(KBUILD_CFLAGS))) \

Greg Kroah-Hartman

author maintainer

2019-09-18 06:33 UTC #27 lore raw

PATCH 27/45 powerpc: Add barrier_nospec to raw_copy_in_user()

From: Suraj Jitindar Singh <[email protected]>

commit 6fbcdd59094ade30db63f32316e9502425d7b256 upstream.

Commit ddf35cf3764b ("powerpc: Use barrier_nospec in copy_from_user()") Added barrier_nospec before loading from user-controlled pointers. The intention was to order the load from the potentially user-controlled pointer vs a previous branch based on an access_ok() check or similar.

In order to achieve the same result, add a barrier_nospec to the raw_copy_in_user() function before loading from such a user-controlled pointer.

Fixes ddf35cf3764b ("powerpc: Use barrier_nospec in copy_from_user()")

Signed-off-by Suraj Jitindar Singh <[email protected]>

Signed-off-by Michael Ellerman <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/powerpc/include/asm/uaccess.h |    1 +
 1 file changed, 1 insertion(+)

arch/powerpc/include/asm/uaccess.h +1 -0

@@ -280,6 +280,7 @@ extern unsigned long __copy_tofrom_user(
 static inline unsigned long
 raw_copy_in_user(void __user *to, const void __user *from, unsigned long n)
 {
+	barrier_nospec();
 	return __copy_tofrom_user(to, from, n);
 }
 #endif /* __powerpc64__ */

Greg Kroah-Hartman

author maintainer

2019-09-18 06:20 UTC #28 lore raw

PATCH 28/45 drm/meson: Add support for XBGR8888 & ABGR8888 formats

Link https://patchwork.freedesktop.org/patch/msgid/[email protected]

From: Neil Armstrong <[email protected]>

commit 5ffff4415f9eeae834960226770963e2947e17eb upstream.

Add missing XBGR8888 & ABGR8888 formats variants from the primary plane.

Fixes bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller")

Signed-off-by Neil Armstrong <[email protected]>

Reviewed-by Kevin Hilman <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/gpu/drm/meson/meson_plane.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

drivers/gpu/drm/meson/meson_plane.c +16 -0

@@ -124,6 +124,13 @@ static void meson_plane_atomic_update(st
 		priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
 					      OSD_COLOR_MATRIX_32_ARGB;
 		break;
+	case DRM_FORMAT_XBGR8888:
+		/* For XRGB, replace the pixel's alpha by 0xFF */
+		writel_bits_relaxed(OSD_REPLACE_EN, OSD_REPLACE_EN,
+				    priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
+		priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
+					      OSD_COLOR_MATRIX_32_ABGR;
+		break;
 	case DRM_FORMAT_ARGB8888:
 		/* For ARGB, use the pixel's alpha */
 		writel_bits_relaxed(OSD_REPLACE_EN, 0,

@@ -131,6 +138,13 @@ static void meson_plane_atomic_update(st
 		priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
 					      OSD_COLOR_MATRIX_32_ARGB;
 		break;
+	case DRM_FORMAT_ABGR8888:
+		/* For ARGB, use the pixel's alpha */
+		writel_bits_relaxed(OSD_REPLACE_EN, 0,
+				    priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
+		priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
+					      OSD_COLOR_MATRIX_32_ABGR;
+		break;
 	case DRM_FORMAT_RGB888:
 		priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_24 |
 					      OSD_COLOR_MATRIX_24_RGB;

@@ -200,7 +214,9 @@ static const struct drm_plane_funcs meso
 
 static const uint32_t supported_drm_formats[] = {
 	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_ABGR8888,
 	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_XBGR8888,
 	DRM_FORMAT_RGB888,
 	DRM_FORMAT_RGB565,
 };

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #29 lore raw

PATCH 29/45 clk: rockchip: Dont yell about bad mmc phases when getting

From: Douglas Anderson <[email protected]>

commit 6943b839721ad4a31ad2bacf6e71b21f2dfe3134 upstream.

At boot time, my rk3288-veyron devices yell with 8 lines that look like this:

  [    0.000000] rockchip_mmc_get_phase: invalid clk rate

This is because the clock framework at clk_register() time tries to get the phase but we don't have a parent yet.

While the errors appear to be harmless they are still ugly and, in general, we don't want yells like this in the log unless they are important.

There's no real reason to be yelling here. We can still return -EINVAL to indicate that the phase makes no sense without a parent. If someone really tries to do tuning and the clock is reported as 0 then we'll see the yells in rockchip_mmc_set_phase().

Fixes 4bf59902b500 ("clk: rockchip: Prevent calculating mmc phase if clock rate is zero")

Signed-off-by Douglas Anderson <[email protected]>

Signed-off-by Heiko Stuebner <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/clk/rockchip/clk-mmc-phase.c |    4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

drivers/clk/rockchip/clk-mmc-phase.c +1 -3

@@ -59,10 +59,8 @@ static int rockchip_mmc_get_phase(struct
 	u32 delay_num = 0;
 
 	/* See the comment for rockchip_mmc_set_phase below */
-	if (!rate) {
-		pr_err("%s: invalid clk rate\n", __func__);
+	if (!rate)
 		return -EINVAL;
-	}
 
 	raw_value = readl(mmc_clock->reg) >> (mmc_clock->shift);

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #30 lore raw

PATCH 30/45 mtd: rawnand: mtk: Fix wrongly assigned OOB buffer pointer issue

From: Xiaolei Li <[email protected]>

commit 336d4b138be2dad372b67a2388e42805c48aaa38 upstream.

One main goal of the function mtk_nfc_update_ecc_stats is to check whether sectors are all empty. If they are empty, set these sectors's data buffer and OOB buffer as 0xff.

But now, the sector OOB buffer pointer is wrongly assigned. We always do memset from sector 0.

To fix this issue, pass start sector number to make OOB buffer pointer be properly assigned.

Fixes 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device")

Signed-off-by Xiaolei Li <[email protected]>

Reviewed-by Miquel Raynal <[email protected]>

Signed-off-by Miquel Raynal <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/mtd/nand/mtk_nand.c |   21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

drivers/mtd/nand/mtk_nand.c +10 ~~-11~~

@@ -846,19 +846,21 @@ static int mtk_nfc_write_oob_std(struct
 	return ret & NAND_STATUS_FAIL ? -EIO : 0;
 }
 
-static int mtk_nfc_update_ecc_stats(struct mtd_info *mtd, u8 *buf, u32 sectors)
+static int mtk_nfc_update_ecc_stats(struct mtd_info *mtd, u8 *buf, u32 start,
+				    u32 sectors)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
 	struct mtk_nfc *nfc = nand_get_controller_data(chip);
 	struct mtk_nfc_nand_chip *mtk_nand = to_mtk_nand(chip);
 	struct mtk_ecc_stats stats;
+	u32 reg_size = mtk_nand->fdm.reg_size;
 	int rc, i;
 
 	rc = nfi_readl(nfc, NFI_STA) & STA_EMP_PAGE;
 	if (rc) {
 		memset(buf, 0xff, sectors * chip->ecc.size);
 		for (i = 0; i < sectors; i++)
-			memset(oob_ptr(chip, i), 0xff, mtk_nand->fdm.reg_size);
+			memset(oob_ptr(chip, start + i), 0xff, reg_size);
 		return 0;
 	}

@@ -878,7 +880,7 @@ static int mtk_nfc_read_subpage(struct m
 	u32 spare = mtk_nand->spare_per_sector;
 	u32 column, sectors, start, end, reg;
 	dma_addr_t addr;
-	int bitflips;
+	int bitflips = 0;
 	size_t len;
 	u8 *buf;
 	int rc;

@@ -946,14 +948,11 @@ static int mtk_nfc_read_subpage(struct m
 	if (rc < 0) {
 		dev_err(nfc->dev, "subpage done timeout\n");
 		bitflips = -EIO;
-	} else {
-		bitflips = 0;
-		if (!raw) {
-			rc = mtk_ecc_wait_done(nfc->ecc, ECC_DECODE);
-			bitflips = rc < 0 ? -ETIMEDOUT :
-				mtk_nfc_update_ecc_stats(mtd, buf, sectors);
-			mtk_nfc_read_fdm(chip, start, sectors);
-		}
+	} else if (!raw) {
+		rc = mtk_ecc_wait_done(nfc->ecc, ECC_DECODE);
+		bitflips = rc < 0 ? -ETIMEDOUT :
+			mtk_nfc_update_ecc_stats(mtd, buf, start, sectors);
+		mtk_nfc_read_fdm(chip, start, sectors);
 	}
 
 	dma_unmap_single(nfc->dev, addr, len, DMA_FROM_DEVICE);

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #31 lore raw

PATCH 31/45 PCI: Always allow probing with driver_override

Link https://lore.kernel.org/lkml/[email protected] open here

From: Alex Williamson <[email protected]>

commit 2d2f4273cbe9058d1f5a518e5e880d27d7b3b30f upstream.

Commit 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding") introduced the sriov_drivers_autoprobe attribute which allows users to prevent the kernel from automatically probing a driver for new VFs as they are created. This allows VFs to be spawned without automatically binding the new device to a host driver, such as in cases where the user intends to use the device only with a meta driver like vfio-pci. However, the current implementation prevents any use of drivers_probe with the VF while sriov_drivers_autoprobe=0. This blocks the now current general practice of setting driver_override followed by using drivers_probe to bind a device to a specified driver.

The kernel never automatically sets a driver_override therefore it seems we can assume a driver_override reflects the intent of the user. Also, probing a device using a driver_override match seems outside the scope of the 'auto' part of sriov_drivers_autoprobe. Therefore, let's allow driver_override matches regardless of sriov_drivers_autoprobe, which we can do by simply testing if a driver_override is set for a device as a 'can probe' condition.

Fixes 0e7df22401a3 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding")

Link https://lore.kernel.org/linux-pci/[email protected]/T/#u open here

Signed-off-by Alex Williamson <[email protected]>

Signed-off-by Bjorn Helgaas <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/pci/pci-driver.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

drivers/pci/pci-driver.c +2 -1

@@ -400,7 +400,8 @@ void __weak pcibios_free_irq(struct pci_
 #ifdef CONFIG_PCI_IOV
 static inline bool pci_device_can_probe(struct pci_dev *pdev)
 {
-	return (!pdev->is_virtfn || pdev->physfn->sriov->drivers_autoprobe);
+	return (!pdev->is_virtfn || pdev->physfn->sriov->drivers_autoprobe ||
+		pdev->driver_override);
 }
 #else
 static inline bool pci_device_can_probe(struct pci_dev *pdev)

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #32 lore raw

PATCH 32/45 ubifs: Correctly use tnc_next() in search_dh_cookie()

From: Richard Weinberger <[email protected]>

commit bacfa94b08027b9f66ede7044972e3b066766b3e upstream.

Commit c877154d307f fixed an uninitialized variable and optimized the function to not call tnc_next() in the first iteration of the loop. While this seemed perfectly legit and wise, it turned out to be illegal.
If the lookup function does not find an exact match it will rewind the cursor by 1.
The rewinded cursor will not match the name hash we are looking for and this results in a spurious -ENOENT.
So we need to move to the next entry in case of an non-exact match, but not if the match was exact.

While we are here, update the documentation to avoid further confusion.

Cc Hyunchul Lee <[email protected]>

Cc Geert Uytterhoeven <[email protected]>

Fixes c877154d307f ("ubifs: Fix uninitialized variable in search_dh_cookie()")

Fixes 781f675e2d7e ("ubifs: Fix unlink code wrt. double hash lookups")

Signed-off-by Richard Weinberger <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 fs/ubifs/tnc.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

fs/ubifs/tnc.c +11 -5

@@ -1164,8 +1164,8 @@ static struct ubifs_znode *dirty_cow_bot
  *   o exact match, i.e. the found zero-level znode contains key @key, then %1
  *     is returned and slot number of the matched branch is stored in @n;
  *   o not exact match, which means that zero-level znode does not contain
- *     @key, then %0 is returned and slot number of the closest branch is stored
- *     in @n;
+ *     @key, then %0 is returned and slot number of the closest branch or %-1
+ *     is stored in @n; In this case calling tnc_next() is mandatory.
  *   o @key is so small that it is even less than the lowest key of the
  *     leftmost zero-level node, then %0 is returned and %0 is stored in @n.
  *

@@ -1882,13 +1882,19 @@ int ubifs_tnc_lookup_nm(struct ubifs_inf
 
 static int search_dh_cookie(struct ubifs_info *c, const union ubifs_key *key,
 			    struct ubifs_dent_node *dent, uint32_t cookie,
-			    struct ubifs_znode **zn, int *n)
+			    struct ubifs_znode **zn, int *n, int exact)
 {
 	int err;
 	struct ubifs_znode *znode = *zn;
 	struct ubifs_zbranch *zbr;
 	union ubifs_key *dkey;
 
+	if (!exact) {
+		err = tnc_next(c, &znode, n);
+		if (err)
+			return err;
+	}
+
 	for (;;) {
 		zbr = &znode->zbranch[*n];
 		dkey = &zbr->key;

@@ -1930,7 +1936,7 @@ static int do_lookup_dh(struct ubifs_inf
 	if (unlikely(err < 0))
 		goto out_unlock;
 
-	err = search_dh_cookie(c, key, dent, cookie, &znode, &n);
+	err = search_dh_cookie(c, key, dent, cookie, &znode, &n, err);
 
 out_unlock:
 	mutex_unlock(&c->tnc_mutex);

@@ -2716,7 +2722,7 @@ int ubifs_tnc_remove_dh(struct ubifs_inf
 		if (unlikely(err < 0))
 			goto out_free;
 
-		err = search_dh_cookie(c, key, dent, cookie, &znode, &n);
+		err = search_dh_cookie(c, key, dent, cookie, &znode, &n, err);
 		if (err)
 			goto out_free;
 	}

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #33 lore raw

PATCH 33/45 driver core: Fix use-after-free and double free on glue directory

From: Muchun Song <[email protected]>

commit ac43432cb1f5c2950408534987e57c2071e24d8f upstream.

There is a race condition between removing glue directory and adding a new device under the glue dir. It can be reproduced in following test:

CPU1: CPU2:

device_add()
get_device_parent()
class_dir_create_and_add()
kobject_add_internal()
create_dir() // create glue_dir

device_add()
get_device_parent()
kobject_get() // get glue_dir

device_del()
cleanup_glue_dir()

    kobject_del(glue_dir)

                                                kobject_add()
                                                  kobject_add_internal()
                                                    create_dir() // in glue_dir
                                                      sysfs_create_dir_ns()
                                                        kernfs_create_dir_ns(sd)

      sysfs_remove_dir() // glue_dir->sd=NULL
      sysfs_put()        // free glue_dir->sd

                                                          // sd is freed
                                                          kernfs_new_node(sd)
                                                            kernfs_get(glue_dir)
                                                            kernfs_add_one()
                                                            kernfs_put()

Before CPU1 remove last child device under glue dir, if CPU2 add a new device under glue dir, the glue_dir kobject reference count will be increase to 2 via kobject_get() in get_device_parent(). And CPU2 has been called kernfs_create_dir_ns(), but not call kernfs_new_node(). Meanwhile, CPU1 call sysfs_remove_dir() and sysfs_put(). This result in glue_dir->sd is freed and it's reference count will be 0. Then CPU2 call kernfs_get(glue_dir) will trigger a warning in kernfs_get() and increase it's reference count to 1. Because glue_dir->sd is freed by CPU1, the next call kernfs_add_one() by CPU2 will fail(This is also use-after-free) and call kernfs_put() to decrease reference count. Because the reference count is decremented to 0, it will also call kmem_cache_free() to free the glue_dir->sd again. This will result in double free.

In order to avoid this happening, we also should make sure that kernfs_node for glue_dir is released in CPU1 only when refcount for glue_dir kobj is 1 to fix this race.

The following calltrace is captured in kernel 4.14 with the following patch applied:

commit 726e41097920 ("drivers: core: Remove glue dirs from sysfs earlier")

--------------------------------------------------------------------------

[    3.633703] WARNING: CPU: 4 PID: 513 at .../fs/kernfs/dir.c:494
                Here is WARN_ON(!atomic_read(&kn->count) in kernfs_get().
....
[    3.633986] Call trace:
[    3.633991]  kernfs_create_dir_ns+0xa8/0xb0
[    3.633994]  sysfs_create_dir_ns+0x54/0xe8
[    3.634001]  kobject_add_internal+0x22c/0x3f0
[    3.634005]  kobject_add+0xe4/0x118
[    3.634011]  device_add+0x200/0x870
[    3.634017]  _request_firmware+0x958/0xc38
[    3.634020]  request_firmware_into_buf+0x4c/0x70
....
[    3.634064] kernel BUG at .../mm/slub.c:294!
                Here is BUG_ON(object == fp) in set_freepointer().
....
[    3.634346] Call trace:
[    3.634351]  kmem_cache_free+0x504/0x6b8
[    3.634355]  kernfs_put+0x14c/0x1d8
[    3.634359]  kernfs_create_dir_ns+0x88/0xb0
[    3.634362]  sysfs_create_dir_ns+0x54/0xe8
[    3.634366]  kobject_add_internal+0x22c/0x3f0
[    3.634370]  kobject_add+0xe4/0x118
[    3.634374]  device_add+0x200/0x870
[    3.634378]  _request_firmware+0x958/0xc38
[    3.634381]  request_firmware_into_buf+0x4c/0x70

--------------------------------------------------------------------------

Fixes 726e41097920 ("drivers: core: Remove glue dirs from sysfs earlier")

Signed-off-by Muchun Song <[email protected]>

Reviewed-by Mukesh Ojha <[email protected]>

Signed-off-by Prateek Sood <[email protected]>

Link https://lore.kernel.org/r/[email protected] open here

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/base/core.c |   53 +++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 52 insertions(+), 1 deletion(-)

drivers/base/core.c +52 -1

@@ -1572,12 +1572,63 @@ static inline struct kobject *get_glue_d
  */
 static void cleanup_glue_dir(struct device *dev, struct kobject *glue_dir)
 {
+	unsigned int ref;
+
 	/* see if we live in a "glue" directory */
 	if (!live_in_glue_dir(glue_dir, dev))
 		return;
 
 	mutex_lock(&gdp_mutex);
-	if (!kobject_has_children(glue_dir))
+	/**
+	 * There is a race condition between removing glue directory
+	 * and adding a new device under the glue directory.
+	 *
+	 * CPU1:                                         CPU2:
+	 *
+	 * device_add()
+	 *   get_device_parent()
+	 *     class_dir_create_and_add()
+	 *       kobject_add_internal()
+	 *         create_dir()    // create glue_dir
+	 *
+	 *                                               device_add()
+	 *                                                 get_device_parent()
+	 *                                                   kobject_get() // get glue_dir
+	 *
+	 * device_del()
+	 *   cleanup_glue_dir()
+	 *     kobject_del(glue_dir)
+	 *
+	 *                                               kobject_add()
+	 *                                                 kobject_add_internal()
+	 *                                                   create_dir() // in glue_dir
+	 *                                                     sysfs_create_dir_ns()
+	 *                                                       kernfs_create_dir_ns(sd)
+	 *
+	 *       sysfs_remove_dir() // glue_dir->sd=NULL
+	 *       sysfs_put()        // free glue_dir->sd
+	 *
+	 *                                                         // sd is freed
+	 *                                                         kernfs_new_node(sd)
+	 *                                                           kernfs_get(glue_dir)
+	 *                                                           kernfs_add_one()
+	 *                                                           kernfs_put()
+	 *
+	 * Before CPU1 remove last child device under glue dir, if CPU2 add
+	 * a new device under glue dir, the glue_dir kobject reference count
+	 * will be increase to 2 in kobject_get(k). And CPU2 has been called
+	 * kernfs_create_dir_ns(). Meanwhile, CPU1 call sysfs_remove_dir()
+	 * and sysfs_put(). This result in glue_dir->sd is freed.
+	 *
+	 * Then the CPU2 will see a stale "empty" but still potentially used
+	 * glue dir around in kernfs_new_node().
+	 *
+	 * In order to avoid this happening, we also should make sure that
+	 * kernfs_node for glue_dir is released in CPU1 only when refcount
+	 * for glue_dir kobj is 1.
+	 */
+	ref = kref_read(&glue_dir->kref);
+	if (!kobject_has_children(glue_dir) && !--ref)
 		kobject_del(glue_dir);
 	kobject_put(glue_dir);
 	mutex_unlock(&gdp_mutex);

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #34 lore raw

PATCH 34/45 crypto: talitos - check AES key size

From: Christophe Leroy <[email protected]>

commit 1ba34e71e9e56ac29a52e0d42b6290f3dc5bfd90 upstream.

Although the HW accepts any size and silently truncates it to the correct length, the extra tests expects EINVAL to be returned when the key size is not valid.

Fixes 4de9d0b547b9 ("crypto: talitos - Add ablkcipher algorithms")

Signed-off-by Herbert Xu <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/crypto/talitos.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

drivers/crypto/talitos.c +14 -0

@@ -1528,6 +1528,18 @@ static int ablkcipher_setkey(struct cryp
 	return 0;
 }
 
+static int ablkcipher_aes_setkey(struct crypto_ablkcipher *cipher,
+				  const u8 *key, unsigned int keylen)
+{
+	if (keylen == AES_KEYSIZE_128 || keylen == AES_KEYSIZE_192 ||
+	    keylen == AES_KEYSIZE_256)
+		return ablkcipher_setkey(cipher, key, keylen);
+
+	crypto_ablkcipher_set_flags(cipher, CRYPTO_TFM_RES_BAD_KEY_LEN);
+
+	return -EINVAL;
+}
+
 static void common_nonsnoop_unmap(struct device *dev,
 				  struct talitos_edesc *edesc,
 				  struct ablkcipher_request *areq)

@@ -2621,6 +2633,7 @@ static struct talitos_alg_template drive
 				.min_keysize = AES_MIN_KEY_SIZE,
 				.max_keysize = AES_MAX_KEY_SIZE,
 				.ivsize = AES_BLOCK_SIZE,
+				.setkey = ablkcipher_aes_setkey,
 			}
 		},
 		.desc_hdr_template = DESC_HDR_TYPE_COMMON_NONSNOOP_NO_AFEU |

@@ -2638,6 +2651,7 @@ static struct talitos_alg_template drive
 				.min_keysize = AES_MIN_KEY_SIZE,
 				.max_keysize = AES_MAX_KEY_SIZE,
 				.ivsize = AES_BLOCK_SIZE,
+				.setkey = ablkcipher_aes_setkey,
 			}
 		},
 		.desc_hdr_template = DESC_HDR_TYPE_AESU_CTR_NONSNOOP |

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #35 lore raw

PATCH 35/45 crypto: talitos - fix CTR alg blocksize

From: Christophe Leroy <[email protected]>

commit b9a05b6041cb9810a291315569b2af0d63c3680a upstream.

CTR has a blocksize of 1.

Fixes 5e75ae1b3cef ("crypto: talitos - add new crypto modes")

Signed-off-by Herbert Xu <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/crypto/talitos.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/crypto/talitos.c +1 -1

@@ -2644,7 +2644,7 @@ static struct talitos_alg_template drive
 		.alg.crypto = {
 			.cra_name = "ctr(aes)",
 			.cra_driver_name = "ctr-aes-talitos",
-			.cra_blocksize = AES_BLOCK_SIZE,
+			.cra_blocksize = 1,
 			.cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
 				     CRYPTO_ALG_ASYNC,
 			.cra_ablkcipher = {

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #36 lore raw

PATCH 36/45 crypto: talitos - check data blocksize in ablkcipher.

From: Christophe Leroy <[email protected]>

commit ee483d32ee1a1a7f7d7e918fbc350c790a5af64a upstream.

When data size is not a multiple of the alg's block size, the SEC generates an error interrupt and dumps the registers. And for NULL size, the SEC does just nothing and the interrupt is awaited forever.

This patch ensures the data size is correct before submitting the request to the SEC engine.

Fixes 4de9d0b547b9 ("crypto: talitos - Add ablkcipher algorithms")

Signed-off-by Herbert Xu <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/crypto/talitos.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

drivers/crypto/talitos.c +16 -0

@@ -1668,6 +1668,14 @@ static int ablkcipher_encrypt(struct abl
 	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
 	struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
 	struct talitos_edesc *edesc;
+	unsigned int blocksize =
+			crypto_tfm_alg_blocksize(crypto_ablkcipher_tfm(cipher));
+
+	if (!areq->nbytes)
+		return 0;
+
+	if (areq->nbytes % blocksize)
+		return -EINVAL;
 
 	/* allocate extended descriptor */
 	edesc = ablkcipher_edesc_alloc(areq, true);

@@ -1685,6 +1693,14 @@ static int ablkcipher_decrypt(struct abl
 	struct crypto_ablkcipher *cipher = crypto_ablkcipher_reqtfm(areq);
 	struct talitos_ctx *ctx = crypto_ablkcipher_ctx(cipher);
 	struct talitos_edesc *edesc;
+	unsigned int blocksize =
+			crypto_tfm_alg_blocksize(crypto_ablkcipher_tfm(cipher));
+
+	if (!areq->nbytes)
+		return 0;
+
+	if (areq->nbytes % blocksize)
+		return -EINVAL;
 
 	/* allocate extended descriptor */
 	edesc = ablkcipher_edesc_alloc(areq, false);

Greg Kroah-Hartman

author maintainer

2019-09-18 06:22 UTC #37 lore raw

PATCH 37/45 crypto: talitos - fix ECB algs ivsize

From: Christophe Leroy <[email protected]>

commit d84cc9c9524ec5973a337533e6d8ccd3e5f05f2b upstream.

ECB's ivsize must be 0.

Fixes 5e75ae1b3cef ("crypto: talitos - add new crypto modes")

Signed-off-by Herbert Xu <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/crypto/talitos.c |    1 -
 1 file changed, 1 deletion(-)

drivers/crypto/talitos.c +0 -1

@@ -2666,7 +2666,6 @@ static struct talitos_alg_template drive
 			.cra_ablkcipher = {
 				.min_keysize = AES_MIN_KEY_SIZE,
 				.max_keysize = AES_MAX_KEY_SIZE,
-				.ivsize = AES_BLOCK_SIZE,
 				.setkey = ablkcipher_aes_setkey,
 			}
 		},

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #38 lore raw

PATCH 38/45 crypto: talitos - Do not modify req->cryptlen on decryption.

From: Christophe Leroy <[email protected]>

commit 7ede4c36cf7c6516986ee9d75b197c8bf73ea96f upstream.

For decrypt, req->cryptlen includes the size of the authentication part while all functions of the driver expect cryptlen to be the size of the encrypted data.

As it is not expected to change req->cryptlen, this patch implements local calculation of cryptlen.

Fixes 9c4a79653b35 ("crypto: talitos - Freescale integrated security engine (SEC) driver")

Signed-off-by Herbert Xu <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/crypto/talitos.c |   31 +++++++++++++++++--------------
 1 file changed, 17 insertions(+), 14 deletions(-)

drivers/crypto/talitos.c +17 ~~-14~~

@@ -943,11 +943,13 @@ static void talitos_sg_unmap(struct devi
 
 static void ipsec_esp_unmap(struct device *dev,
 			    struct talitos_edesc *edesc,
-			    struct aead_request *areq)
+			    struct aead_request *areq, bool encrypt)
 {
 	struct crypto_aead *aead = crypto_aead_reqtfm(areq);
 	struct talitos_ctx *ctx = crypto_aead_ctx(aead);
 	unsigned int ivsize = crypto_aead_ivsize(aead);
+	unsigned int authsize = crypto_aead_authsize(aead);
+	unsigned int cryptlen = areq->cryptlen - (encrypt ? 0 : authsize);
 
 	if (edesc->desc.hdr & DESC_HDR_TYPE_IPSEC_ESP)
 		unmap_single_talitos_ptr(dev, &edesc->desc.ptr[6],

@@ -956,7 +958,7 @@ static void ipsec_esp_unmap(struct devic
 	unmap_single_talitos_ptr(dev, &edesc->desc.ptr[2], DMA_TO_DEVICE);
 	unmap_single_talitos_ptr(dev, &edesc->desc.ptr[0], DMA_TO_DEVICE);
 
-	talitos_sg_unmap(dev, edesc, areq->src, areq->dst, areq->cryptlen,
+	talitos_sg_unmap(dev, edesc, areq->src, areq->dst, cryptlen,
 			 areq->assoclen);
 
 	if (edesc->dma_len)

@@ -967,7 +969,7 @@ static void ipsec_esp_unmap(struct devic
 		unsigned int dst_nents = edesc->dst_nents ? : 1;
 
 		sg_pcopy_to_buffer(areq->dst, dst_nents, ctx->iv, ivsize,
-				   areq->assoclen + areq->cryptlen - ivsize);
+				   areq->assoclen + cryptlen - ivsize);
 	}
 }

@@ -988,7 +990,7 @@ static void ipsec_esp_encrypt_done(struc
 
 	edesc = container_of(desc, struct talitos_edesc, desc);
 
-	ipsec_esp_unmap(dev, edesc, areq);
+	ipsec_esp_unmap(dev, edesc, areq, true);
 
 	/* copy the generated ICV to dst */
 	if (edesc->icv_ool) {

@@ -1020,7 +1022,7 @@ static void ipsec_esp_decrypt_swauth_don
 
 	edesc = container_of(desc, struct talitos_edesc, desc);
 
-	ipsec_esp_unmap(dev, edesc, req);
+	ipsec_esp_unmap(dev, edesc, req, false);
 
 	if (!err) {
 		char icvdata[SHA512_DIGEST_SIZE];

@@ -1066,7 +1068,7 @@ static void ipsec_esp_decrypt_hwauth_don
 
 	edesc = container_of(desc, struct talitos_edesc, desc);
 
-	ipsec_esp_unmap(dev, edesc, req);
+	ipsec_esp_unmap(dev, edesc, req, false);
 
 	/* check ICV auth status */
 	if (!err && ((desc->hdr_lo & DESC_HDR_LO_ICCR1_MASK) !=

@@ -1173,6 +1175,7 @@ static int talitos_sg_map(struct device
  * fill in and submit ipsec_esp descriptor
  */
 static int ipsec_esp(struct talitos_edesc *edesc, struct aead_request *areq,
+		     bool encrypt,
 		     void (*callback)(struct device *dev,
 				      struct talitos_desc *desc,
 				      void *context, int error))

@@ -1182,7 +1185,7 @@ static int ipsec_esp(struct talitos_edes
 	struct talitos_ctx *ctx = crypto_aead_ctx(aead);
 	struct device *dev = ctx->dev;
 	struct talitos_desc *desc = &edesc->desc;
-	unsigned int cryptlen = areq->cryptlen;
+	unsigned int cryptlen = areq->cryptlen - (encrypt ? 0 : authsize);
 	unsigned int ivsize = crypto_aead_ivsize(aead);
 	int tbl_off = 0;
 	int sg_count, ret;

@@ -1324,7 +1327,7 @@ static int ipsec_esp(struct talitos_edes
 
 	ret = talitos_submit(dev, ctx->ch, desc, callback, areq);
 	if (ret != -EINPROGRESS) {
-		ipsec_esp_unmap(dev, edesc, areq);
+		ipsec_esp_unmap(dev, edesc, areq, encrypt);
 		kfree(edesc);
 	}
 	return ret;

@@ -1433,9 +1436,10 @@ static struct talitos_edesc *aead_edesc_
 	unsigned int authsize = crypto_aead_authsize(authenc);
 	struct talitos_ctx *ctx = crypto_aead_ctx(authenc);
 	unsigned int ivsize = crypto_aead_ivsize(authenc);
+	unsigned int cryptlen = areq->cryptlen - (encrypt ? 0 : authsize);
 
 	return talitos_edesc_alloc(ctx->dev, areq->src, areq->dst,
-				   iv, areq->assoclen, areq->cryptlen,
+				   iv, areq->assoclen, cryptlen,
 				   authsize, ivsize, icv_stashing,
 				   areq->base.flags, encrypt);
 }

@@ -1454,7 +1458,7 @@ static int aead_encrypt(struct aead_requ
 	/* set encrypt */
 	edesc->desc.hdr = ctx->desc_hdr_template | DESC_HDR_MODE0_ENCRYPT;
 
-	return ipsec_esp(edesc, req, ipsec_esp_encrypt_done);
+	return ipsec_esp(edesc, req, true, ipsec_esp_encrypt_done);
 }
 
 static int aead_decrypt(struct aead_request *req)

@@ -1466,8 +1470,6 @@ static int aead_decrypt(struct aead_requ
 	struct talitos_edesc *edesc;
 	void *icvdata;
 
-	req->cryptlen -= authsize;
-
 	/* allocate extended descriptor */
 	edesc = aead_edesc_alloc(req, req->iv, 1, false);
 	if (IS_ERR(edesc))

@@ -1485,7 +1487,8 @@ static int aead_decrypt(struct aead_requ
 		/* reset integrity check result bits */
 		edesc->desc.hdr_lo = 0;
 
-		return ipsec_esp(edesc, req, ipsec_esp_decrypt_hwauth_done);
+		return ipsec_esp(edesc, req, false,
+				 ipsec_esp_decrypt_hwauth_done);
 	}
 
 	/* Have to check the ICV with software */

@@ -1501,7 +1504,7 @@ static int aead_decrypt(struct aead_requ
 	sg_pcopy_to_buffer(req->src, edesc->src_nents ? : 1, icvdata, authsize,
 			   req->assoclen + req->cryptlen - authsize);
 
-	return ipsec_esp(edesc, req, ipsec_esp_decrypt_swauth_done);
+	return ipsec_esp(edesc, req, false, ipsec_esp_decrypt_swauth_done);
 }
 
 static int ablkcipher_setkey(struct crypto_ablkcipher *cipher,

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #39 lore raw

PATCH 39/45 crypto: talitos - HMAC SNOOP NO AFEU mode requires SW icv checking.

From: Christophe Leroy <[email protected]>

commit 4bbfb839259a9c96a0be872e16f7471b7136aee5 upstream.

In that mode, hardware ICV verification is not supported.

Fixes 7405c8d7ff97 ("crypto: talitos - templates for AEAD using HMAC_SNOOP_NO_AFEU")

Signed-off-by Herbert Xu <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/crypto/talitos.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

drivers/crypto/talitos.c +2 -1

@@ -1475,7 +1475,8 @@ static int aead_decrypt(struct aead_requ
 	if (IS_ERR(edesc))
 		return PTR_ERR(edesc);
 
-	if ((priv->features & TALITOS_FTR_HW_AUTH_CHECK) &&
+	if ((edesc->desc.hdr & DESC_HDR_TYPE_IPSEC_ESP) &&
+	    (priv->features & TALITOS_FTR_HW_AUTH_CHECK) &&
 	    ((!edesc->src_nents && !edesc->dst_nents) ||
 	     priv->features & TALITOS_FTR_SRC_LINK_TBL_LEN_INCLUDES_EXTENT)) {

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #40 lore raw

PATCH 40/45 firmware: ti_sci: Always request response from firmware

From: Andrew F. Davis <[email protected]>

commit 66f030eac257a572fbedab3d9646d87d647351fd upstream.

TI-SCI firmware will only respond to messages when the TI_SCI_FLAG_REQ_ACK_ON_PROCESSED flag is set. Most messages already do this, set this for the ones that do not.

This will be enforced in future firmware that better match the TI-SCI specifications, this patch will not break users of existing firmware.

Fixes aa276781a64a ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol")

Signed-off-by Andrew F. Davis <[email protected]>

Acked-by Nishanth Menon <[email protected]>

Tested-by Alejandro Hernandez <[email protected]>

Signed-off-by Tero Kristo <[email protected]>

Signed-off-by Santosh Shilimkar <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/firmware/ti_sci.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

drivers/firmware/ti_sci.c +4 -4

@@ -471,9 +471,9 @@ static int ti_sci_cmd_get_revision(struc
 	struct ti_sci_xfer *xfer;
 	int ret;
 
-	/* No need to setup flags since it is expected to respond */
 	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_VERSION,
-				   0x0, sizeof(struct ti_sci_msg_hdr),
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(struct ti_sci_msg_hdr),
 				   sizeof(*rev_info));
 	if (IS_ERR(xfer)) {
 		ret = PTR_ERR(xfer);

@@ -601,9 +601,9 @@ static int ti_sci_get_device_state(const
 	info = handle_to_ti_sci_info(handle);
 	dev = info->dev;
 
-	/* Response is expected, so need of any flags */
 	xfer = ti_sci_get_one_xfer(info, TI_SCI_MSG_GET_DEVICE_STATE,
-				   0, sizeof(*req), sizeof(*resp));
+				   TI_SCI_FLAG_REQ_ACK_ON_PROCESSED,
+				   sizeof(*req), sizeof(*resp));
 	if (IS_ERR(xfer)) {
 		ret = PTR_ERR(xfer);
 		dev_err(dev, "Message alloc failed(%d)\n", ret);

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #41 lore raw

PATCH 41/45 drm/mediatek: mtk_drm_drv.c: Add of_node_put() before goto

From: Nishka Dasgupta <[email protected]>

commit 165d42c012be69900f0e2f8545626cb9e7d4a832 upstream.

Each iteration of for_each_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the goto in two places.
Issue found with Coccinelle.

Fixes 119f5173628a (drm/mediatek: Add DRM Driver for Mediatek SoC MT8173)

Signed-off-by Nishka Dasgupta <[email protected]>

Signed-off-by CK Hu <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/gpu/drm/mediatek/mtk_drm_drv.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

drivers/gpu/drm/mediatek/mtk_drm_drv.c +4 -1

@@ -504,12 +504,15 @@ static int mtk_drm_probe(struct platform
 			comp = devm_kzalloc(dev, sizeof(*comp), GFP_KERNEL);
 			if (!comp) {
 				ret = -ENOMEM;
+				of_node_put(node);
 				goto err_node;
 			}
 
 			ret = mtk_ddp_comp_init(dev, node, comp, comp_id, NULL);
-			if (ret)
+			if (ret) {
+				of_node_put(node);
 				goto err_node;
+			}
 
 			private->ddp_comp[comp_id] = comp;
 		}

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #42 lore raw

PATCH 42/45 Revert "Bluetooth: btusb: driver to enable the usb-wakeup feature"

Link https://marc.info/?l=linux-bluetooth&m=156441081612627&w=2

From: Mario Limonciello <[email protected]>

commit 1ffdb51f28e8ec6be0a2b812c1765b5cf5c44a8f upstream.

This reverts commit a0085f2510e8976614ad8f766b209448b385492f.

This commit has caused regressions in notebooks that support suspend to idle such as the XPS 9360, XPS 9370 and XPS 9380.

These notebooks will wakeup from suspend to idle from an unsolicited advertising packet from an unpaired BLE device.

In a bug report it was sugggested that this is caused by a generic lack of LE privacy support. Revert this commit until that behavior can be avoided by the kernel.

Fixes a0085f2510e8 ("Bluetooth: btusb: driver to enable the usb-wakeup feature")

BugLink https://bugzilla.kernel.org/show_bug.cgi?id=200039

Link https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/750073/

CC Bastien Nocera <[email protected]>

CC Christian Kellner <[email protected]>

CC Sukumar Ghorai <[email protected]>

Signed-off-by Mario Limonciello <[email protected]>

Signed-off-by Marcel Holtmann <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/bluetooth/btusb.c |    5 -----
 1 file changed, 5 deletions(-)

drivers/bluetooth/btusb.c +0 -5

@@ -1124,10 +1124,6 @@ static int btusb_open(struct hci_dev *hd
 	}
 
 	data->intf->needs_remote_wakeup = 1;
-	/* device specific wakeup source enabled and required for USB
-	 * remote wakeup while host is suspended
-	 */
-	device_wakeup_enable(&data->udev->dev);
 
 	if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
 		goto done;

@@ -1191,7 +1187,6 @@ static int btusb_close(struct hci_dev *h
 		goto failed;
 
 	data->intf->needs_remote_wakeup = 0;
-	device_wakeup_disable(&data->udev->dev);
 	usb_autopm_put_interface(data->intf);
 
 failed:

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #43 lore raw

PATCH 43/45 platform/x86: pmc_atom: Add CB4063 Beckhoff Automation board to critclk_systems DMI table

From: Steffen Dirkwinkel <[email protected]>

commit 9452fbf5c6cf5f470e0748fe7a14a683e7765f7a upstream.

The CB4063 board uses pmc_plt_clk* clocks for ethernet controllers. This adds it to the critclk_systems DMI table so the clocks are marked as CLK_CRITICAL and not turned off.

Fixes 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")

Signed-off-by Steffen Dirkwinkel <[email protected]>

Signed-off-by Andy Shevchenko <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/platform/x86/pmc_atom.c |    8 ++++++++
 1 file changed, 8 insertions(+)

drivers/platform/x86/pmc_atom.c +8 -0

@@ -453,6 +453,14 @@ static const struct dmi_system_id critcl
 	},
 	{
 		/* pmc_plt_clk* - are used for ethernet controllers */
+		.ident = "Beckhoff CB4063",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),
+			DMI_MATCH(DMI_BOARD_NAME, "CB4063"),
+		},
+	},
+	{
+		/* pmc_plt_clk* - are used for ethernet controllers */
 		.ident = "Beckhoff CB6263",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),

Greg Kroah-Hartman

author maintainer

2019-09-18 06:21 UTC #44 lore raw

PATCH 44/45 nvmem: Use the same permissions for eeprom as for nvmem

Link https://lore.kernel.org/r/20190728184255.563332e6@endymion open here

From: Jean Delvare <[email protected]>

commit e70d8b287301eb6d7c7761c6171c56af62110ea3 upstream.

The compatibility "eeprom" attribute is currently root-only no matter what the configuration says. The "nvmem" attribute does respect the setting of the root_only configuration bit, so do the same for "eeprom".

Signed-off-by Jean Delvare <[email protected]>

Fixes b6c217ab9be6 ("nvmem: Add backwards compatibility support for older EEPROM drivers.")

Reviewed-by Bartosz Golaszewski <[email protected]>

Cc Andrew Lunn <[email protected]>

Cc Srinivas Kandagatla <[email protected]>

Cc Arnd Bergmann <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 drivers/nvmem/core.c |   15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

drivers/nvmem/core.c +11 -4

@@ -407,10 +407,17 @@ static int nvmem_setup_compat(struct nvm
 	if (!config->base_dev)
 		return -EINVAL;
 
-	if (nvmem->read_only)
-		nvmem->eeprom = bin_attr_ro_root_nvmem;
-	else
-		nvmem->eeprom = bin_attr_rw_root_nvmem;
+	if (nvmem->read_only) {
+		if (config->root_only)
+			nvmem->eeprom = bin_attr_ro_root_nvmem;
+		else
+			nvmem->eeprom = bin_attr_ro_nvmem;
+	} else {
+		if (config->root_only)
+			nvmem->eeprom = bin_attr_rw_root_nvmem;
+		else
+			nvmem->eeprom = bin_attr_rw_nvmem;
+	}
 	nvmem->eeprom.attr.name = "eeprom";
 	nvmem->eeprom.size = nvmem->size;
 #ifdef CONFIG_DEBUG_LOCK_ALLOC

Greg Kroah-Hartman

author maintainer

2019-09-18 06:22 UTC #45 lore raw

PATCH 45/45 x86/build: Add -Wnoaddress-of-packed-member to REALMODE_CFLAGS, to silence GCC9 build warning

From: Linus Torvalds <[email protected]>

commit 42e0e95474fc6076b5cd68cab8fa0340a1797a72 upstream.

One of the very few warnings I have in the current build comes from arch/x86/boot/edd.c, where I get the following with a gcc9 build:

arch/x86/boot/edd.c: In function ‘query_edd’:
arch/x86/boot/edd.c:148:11: warning: taking address of packed member of ‘struct boot_params’ may result in an unaligned pointer value [-Waddress-of-packed-member]

     148 |  mbrptr = boot_params.edd_mbr_sig_buffer;
         |           ^~~~~~~~~~~

This warning triggers because we throw away all the CFLAGS and then make a new set for REALMODE_CFLAGS, so the -Wno-address-of-packed-member we added in the following commit is not present:

6f303d60534c ("gcc-9: silence 'address-of-packed-member' warning")

The simplest solution for now is to adjust the warning for this version of CFLAGS as well, but it would definitely make sense to examine whether REALMODE_CFLAGS could be derived from CFLAGS, so that it picks up changes in the compiler flags environment automatically.

Signed-off-by Linus Torvalds <[email protected]>

Acked-by Borislav Petkov <[email protected]>

Cc Peter Zijlstra <[email protected]>

Cc Thomas Gleixner <[email protected]>

Signed-off-by Ingo Molnar <[email protected]>

Signed-off-by Greg Kroah-Hartman <[email protected]>

---
 arch/x86/Makefile |    1 +
 1 file changed, 1 insertion(+)

arch/x86/Makefile +1 -0

@@ -39,6 +39,7 @@ REALMODE_CFLAGS	:= $(M16_CFLAGS) -g -Os
 
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -ffreestanding)
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -fno-stack-protector)
+REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), -Wno-address-of-packed-member)
 REALMODE_CFLAGS += $(call __cc-option, $(CC), $(REALMODE_CFLAGS), $(cc_stack_align4))
 export REALMODE_CFLAGS

kernelci.org bot

2019-09-18 13:19 UTC #46 lore raw

stable-rc/linux-4.14.y boot: 131 boots: 0 failed, 121 passed with 10 offline (v4.14.144-46-g187d767985cf)

Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.14.y/kernel/v4.14.144-46-g187d767985cf/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.14.y/kernel/v4.14.144-46-g187d767985cf/

Tree: stable-rc
Branch: linux-4.14.y
Git Describe: v4.14.144-46-g187d767985cf
Git Commit: 187d767985cf878208592ce3ca667e5021abf2f6
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 66 unique boards, 23 SoC families, 13 builds out of 201

Offline Platforms:

arm64:

    defconfig:
        gcc-8
            apq8016-sbc: 1 offline lab

arm:

    multi_v7_defconfig:
        gcc-8
            exynos5800-peach-pi: 1 offline lab
            qcom-apq8064-cm-qs600: 1 offline lab
            qcom-apq8064-ifc6410: 1 offline lab
            sun5i-r8-chip: 1 offline lab

    davinci_all_defconfig:
        gcc-8
            dm365evm,legacy: 1 offline lab

    qcom_defconfig:
        gcc-8
            qcom-apq8064-cm-qs600: 1 offline lab
            qcom-apq8064-ifc6410: 1 offline lab

    sunxi_defconfig:
        gcc-8
            sun5i-r8-chip: 1 offline lab
            sun7i-a20-bananapi: 1 offline lab

---
For more info write to <[email protected]>

Naresh Kamboju

2019-09-18 13:55 UTC #47 lore raw

Quoted 10 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.14.145 release. There are 45 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri 20 Sep 2019 06:09:47 AM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at:

Quoted 9 lines

        https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.145-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Summary
------------------------------------------------------------------------

kernel: 4.14.145-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 187d767985cf878208592ce3ca667e5021abf2f6
git describe: v4.14.144-46-g187d767985cf
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.144-46-g187d767985cf

No regressions (compared to build v4.14.144)

No fixes (compared to build v4.14.144)

Ran 23713 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64

Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-containers-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fs-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-mm-tests
* spectre-meltdown-checker-test
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-cpuhotplug-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-math-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* network-basic-tests
* perf
* v4l2-compliance
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none

Signature · 2 lines

Linaro LKFT
https://lkft.linaro.org

Jon Hunter

maintainer

2019-09-18 16:28 UTC #48 lore raw

Quoted 9 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.14.145 release. There are 45 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri 20 Sep 2019 06:09:47 AM UTC. Anything received after that time might be too late.
The whole patch series can be found in one patch at:

Quoted 8 lines

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.145-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h

All tests are passing for Tegra ...

Test results for stable-v4.14:

    8 builds:	8 pass, 0 fail
    16 boots:	16 pass, 0 fail
    24 tests:	24 pass, 0 fail

Linux version: 4.14.145-rc1-g187d767985cf
Boards tested: tegra124-jetson-tk1, tegra20-ventana,

                tegra210-p2371-2180, tegra30-cardhu-a04

Cheers
Jon

Signature · 1 line

nvpublic

Guenter Roeck

2019-09-18 19:37 UTC #49 lore raw

Quoted 8 lines · Greg Kroah-Hartman

This is the start of the stable review cycle for the 4.14.145 release. There are 45 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Fri 20 Sep 2019 06:09:47 AM UTC. Anything received after that time might be too late.

Build results:

	total: 172 pass: 172 fail: 0
Qemu test results:
	total: 372 pass: 372 fail: 0

Guenter

shuah

2019-09-19 01:26 UTC #50 lore raw