4.19.75-stable review

This is the start of the stable review cycle for the 4.19.75 release. There are 79 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sat 21 Sep 2019 09:44:25 PM UTC. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.75-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 4.19.75-rc1

Sean Young <[email protected]>
media: technisat-usb2: break out of loop at end of buffer

Will Deacon <[email protected]>
arm64: kpti: Whitelist Cortex-A CPUs that don't implement the CSV3 field

Kees Cook <[email protected]>
binfmt_elf: move brk out of mmap when doing direct loader exec

Jann Horn <[email protected]>
floppy: fix usercopy direction

Amir Goldstein <[email protected]>
ovl: fix regression caused by overlapping layers detection

Nathan Chancellor <[email protected]>
PCI: kirin: Fix section mismatch warning

Joerg Roedel <[email protected]>
iommu/amd: Fix race in increase_address_space()

Stuart Hayes <[email protected]>
iommu/amd: Flush old domains in kdump kernel

Hillf Danton <[email protected]>
keys: Fix missing null pointer check in request_key_auth_describe()

Tianyu Lan <[email protected]>
x86/hyper-v: Fix overflow bug in fill_gva_list()

Peter Zijlstra <[email protected]>
x86/uaccess: Don't leak the AC flags into __get_user() argument evaluation

Wenwen Wang <[email protected]>
dmaengine: ti: omap-dma: Add cleanup in omap_dma_probe()

Wenwen Wang <[email protected]>
dmaengine: ti: dma-crossbar: Fix a memory leak bug

Christophe JAILLET <[email protected]>
net: seeq: Fix the function used to release some memory in an error handling path

Dmitry Bogdanov <[email protected]>
net: aquantia: fix out of memory condition on rx side

Naoya Horiguchi <[email protected]>
tools/power turbostat: fix buffer overrun

Zephaniah E. Loss-Cutler-Hull <[email protected]>
tools/power x86_energy_perf_policy: Fix argument parsing

Ben Hutchings <[email protected]>
tools/power x86_energy_perf_policy: Fix "uninitialized variable" warnings at -O2

YueHaibing <[email protected]>
amd-xgbe: Fix error path in xgbe_mod_init()

Kim Phillips <[email protected]>
perf/x86/amd/ibs: Fix sample bias for dispatched micro-ops

Josh Hunt <[email protected]>
perf/x86/intel: Restrict period on Nehalem

Jarkko Nikula <[email protected]>
i2c: designware: Synchronize IRQs when unregistering slave client

Takashi Iwai <[email protected]>
sky2: Disable MSI on yet another ASUS boards (P6Xxxx)

Thomas Falcon <[email protected]>
ibmvnic: Do not process reset during or after device removal

zhaoyang <[email protected]>
ARM: 8901/1: add a criteria for pfn_valid of arm

Nagarjuna Kristam <[email protected]>
usb: host: xhci-tegra: Set DMA mask correctly

Dan Carpenter <[email protected]>
cifs: Use kzfree() to zero out the password

Ronnie Sahlberg <[email protected]>
cifs: set domainName when a domain-key is used in multiuser

Marc Zyngier <[email protected]>
kallsyms: Don't let kallsyms_lookup_size_offset() fail on retrieving the first symbol

Trond Myklebust <[email protected]>
NFSv2: Fix write regression

Trond Myklebust <[email protected]>
NFSv2: Fix eof handling

Thomas Jarosch <[email protected]>
netfilter: nf_conntrack_ftp: Fix debug output

Todd Seidelmann <[email protected]>
netfilter: xt_physdev: Fix spurious error message in physdev_mt_check

Thomas Gleixner <[email protected]>
x86/apic: Fix arch_dynirq_lower_bound() bug for DT enabled machines

Prashant Malani <[email protected]>

    r8152: Set memory to all 0xFFs on failed reg reads

Ilya Leoshkevich <[email protected]>
bpf: allow narrow loads of some sk_reuseport_md fields with offset > 0

Sven Eckelmann <[email protected]>
batman-adv: Only read OGM2 tvlv_len after buffer len check

Doug Berger <[email protected]>
ARM: 8874/1: mm: only adjust sections of valid mm structures

Wenwen Wang <[email protected]>
qed: Add cleanup in qed_slowpath_start()

Ivan Khoronzhuk <[email protected]>
xdp: unpin xdp umem pages in error path

Christophe JAILLET <[email protected]>
Kconfig: Fix the reference to the IDT77105 Phy driver in the description of ATM_NICSTAR_USE_IDT77105

Trond Myklebust <[email protected]>
NFS: Fix initialisation of I/O result struct in nfs_pgio_rpcsetup

Trond Myklebust <[email protected]>
NFSv4: Fix return value in nfs_finish_open()

Trond Myklebust <[email protected]>
NFSv4: Fix return values for nfs4_file_open()

Juliana Rodrigueiro <[email protected]>
netfilter: xt_nfacct: Fix alignment mismatch in xt_nfacct_match_info

Pablo Neira Ayuso <[email protected]>
netfilter: nft_flow_offload: missing netlink attribute policy

Todd Seidelmann <[email protected]>
netfilter: ebtables: Fix argument order to ADD_COUNTER

Phil Reid <[email protected]>
fpga: altera-ps-spi: Fix getting of optional confd gpio

Quentin Monnet <[email protected]>
tools: bpftool: close prog FD before exit on showing a single program

Ilya Leoshkevich <[email protected]>
selftests/bpf: fix "bind{4, 6} deny specific IP & port" on s390

Ilya Leoshkevich <[email protected]>
s390/bpf: use 32-bit index for tail calls

Suman Anna <[email protected]>
bus: ti-sysc: Simplify cleanup upon failures in sysc_probe()

Janusz Krzysztofik <[email protected]>
ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack

Faiz Abbas <[email protected]>
ARM: dts: dra74x: Fix iodelay configuration for mmc3

Tony Lindgren <[email protected]>
ARM: OMAP2+: Fix omap4 errata warning on other SoCs

Ilya Leoshkevich <[email protected]>
s390/bpf: fix lcgr instruction encoding

Tony Lindgren <[email protected]>
bus: ti-sysc: Fix using configured sysc mask value

Tony Lindgren <[email protected]>
ARM: OMAP2+: Fix missing SYSC_HAS_RESET_STATUS for dra7 epwmss

Faiz Abbas <[email protected]>
ARM: dts: am57xx: Disable voltage switching for SD card

YueHaibing <[email protected]>
ieee802154: hwsim: unregister hw while hwsim_subscribe_all_others fails

YueHaibing <[email protected]>
ieee802154: hwsim: Fix error handle path in hwsim_init_module

Masashi Honma <[email protected]>
nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds

Wen Huang <[email protected]>
mwifiex: Fix three heap overflow at parsing element in cfg80211_ap_settings

Razvan Stefanescu <[email protected]>
tty/serial: atmel: reschedule TX after RX was started

Chunyan Zhang <[email protected]>
serial: sprd: correct the wrong sequence of arguments

Hung-Te Lin <[email protected]>
firmware: google: check if size is valid when decoding VPD data

Matt Delco <[email protected]>
KVM: coalesced_mmio: add bounds checking

Cong Wang <[email protected]>
net_sched: let qdisc_put() accept NULL pointer

Dongli Zhang <[email protected]>
xen-netfront: do not assume sk_buff_head list is empty in error handling

Willem de Bruijn <[email protected]>
udp: correct reuseport selection with connected sockets

Xin Long <[email protected]>
ip6_gre: fix a dst leak in ip6erspan_tunnel_xmit

Yoshihiro Shimoda <[email protected]>
phy: renesas: rcar-gen3-usb2: Disable clearing VBUS in over-current

Sean Young <[email protected]>
media: tm6000: double free if usb disconnect while streaming

Alan Stern <[email protected]>
USB: usbcore: Fix slab-out-of-bounds bug during device reset

Aneesh Kumar K.V <[email protected]>
powerpc/mm/radix: Use the right page size for vmemmap mapping

Benjamin Tissoires <[email protected]>
Input: elan_i2c - remove Lenovo Legion Y7000 PnpID

Leon Romanovsky <[email protected]>
RDMA/restrack: Release task struct which was hold by CM_ID object

Aaron Armstrong Skomra <[email protected]>
HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report

Pablo Neira Ayuso <[email protected]>
netfilter: nf_flow_table: set default timeout after successful insertion

-------------

Diffstat:

 Documentation/filesystems/overlayfs.txt            |  2 +-
 Makefile                                           |  4 +-
 arch/arm/boot/dts/am571x-idk.dts                   |  7 +--
 arch/arm/boot/dts/am572x-idk.dts                   |  7 +--
 arch/arm/boot/dts/am574x-idk.dts                   |  7 +--
 arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi    |  1 +
 arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts      |  7 +--
 arch/arm/boot/dts/am57xx-beagle-x15-revc.dts       |  7 +--
 arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi          | 50 +++++++--------
 arch/arm/mach-omap1/ams-delta-fiq-handler.S        |  3 +-
 arch/arm/mach-omap1/ams-delta-fiq.c                |  4 +-
 arch/arm/mach-omap2/omap4-common.c                 |  3 +
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c          |  3 +-
 arch/arm/mm/init.c                                 |  8 ++-
 arch/arm64/kernel/cpufeature.c                     |  6 ++
 arch/powerpc/mm/pgtable-radix.c                    | 16 +++--
 arch/s390/net/bpf_jit_comp.c                       | 12 ++--
 arch/x86/events/amd/ibs.c                          | 13 +++-
 arch/x86/events/intel/core.c                       |  6 ++
 arch/x86/hyperv/mmu.c                              |  8 ++-
 arch/x86/include/asm/perf_event.h                  | 12 ++--
 arch/x86/include/asm/uaccess.h                     |  4 +-
 arch/x86/kernel/apic/io_apic.c                     |  8 ++-
 drivers/atm/Kconfig                                |  2 +-
 drivers/block/floppy.c                             |  4 +-
 drivers/bus/ti-sysc.c                              | 19 +++---
 drivers/dma/ti/dma-crossbar.c                      |  4 +-
 drivers/dma/ti/omap-dma.c                          |  4 +-
 drivers/firmware/google/vpd.c                      |  4 +-
 drivers/firmware/google/vpd_decode.c               | 55 +++++++++-------
 drivers/firmware/google/vpd_decode.h               |  6 +-
 drivers/fpga/altera-ps-spi.c                       | 11 ++--
 drivers/hid/wacom_sys.c                            | 10 +--
 drivers/hid/wacom_wac.c                            |  4 ++
 drivers/i2c/busses/i2c-designware-slave.c          |  1 +
 drivers/infiniband/core/cma.c                      |  7 +--
 drivers/infiniband/core/restrack.c                 |  6 +-
 drivers/input/mouse/elan_i2c_core.c                |  2 +-
 drivers/iommu/amd_iommu.c                          | 40 ++++++++++--
 drivers/media/usb/dvb-usb/technisat-usb2.c         | 22 +++----
 drivers/media/usb/tm6000/tm6000-dvb.c              |  3 +
 drivers/net/ethernet/amd/xgbe/xgbe-main.c          | 10 ++-
 drivers/net/ethernet/aquantia/atlantic/aq_vec.c    |  3 +-
 drivers/net/ethernet/ibm/ibmvnic.c                 |  6 +-
 drivers/net/ethernet/marvell/sky2.c                |  7 +++
 drivers/net/ethernet/qlogic/qed/qed_main.c         |  4 +-
 drivers/net/ethernet/seeq/sgiseeq.c                |  7 ++-
 drivers/net/ieee802154/mac802154_hwsim.c           |  8 ++-
 drivers/net/usb/r8152.c                            |  5 +-
 drivers/net/wireless/marvell/mwifiex/ie.c          |  3 +
 drivers/net/wireless/marvell/mwifiex/uap_cmd.c     |  9 ++-
 drivers/net/xen-netfront.c                         |  2 +-
 drivers/pci/controller/dwc/pcie-kirin.c            |  4 +-
 drivers/phy/renesas/phy-rcar-gen3-usb2.c           |  2 +
 drivers/tty/serial/atmel_serial.c                  |  1 -
 drivers/tty/serial/sprd_serial.c                   |  2 +-
 drivers/usb/core/config.c                          | 12 ++--
 drivers/usb/host/xhci-tegra.c                      | 10 +++
 fs/binfmt_elf.c                                    | 11 ++++
 fs/cifs/connect.c                                  | 22 +++++++
 fs/nfs/dir.c                                       |  2 +-
 fs/nfs/nfs4file.c                                  | 12 ++--
 fs/nfs/pagelist.c                                  |  2 +-
 fs/nfs/proc.c                                      |  7 ++-
 fs/overlayfs/ovl_entry.h                           |  1 +
 fs/overlayfs/super.c                               | 73 ++++++++++++++--------
 include/net/sock_reuseport.h                       | 21 ++++++-
 include/uapi/linux/netfilter/xt_nfacct.h           |  5 ++
 kernel/kallsyms.c                                  |  6 +-
 net/batman-adv/bat_v_ogm.c                         | 18 ++++--
 net/bridge/netfilter/ebtables.c                    |  8 +--
 net/core/filter.c                                  |  8 +--
 net/core/sock_reuseport.c                          | 15 ++++-
 net/ipv4/datagram.c                                |  2 +
 net/ipv4/udp.c                                     |  5 +-
 net/ipv6/datagram.c                                |  2 +
 net/ipv6/ip6_gre.c                                 |  2 +-
 net/ipv6/udp.c                                     |  5 +-
 net/netfilter/nf_conntrack_ftp.c                   |  2 +-
 net/netfilter/nf_flow_table_core.c                 |  2 +-
 net/netfilter/nft_flow_offload.c                   |  6 ++
 net/netfilter/xt_nfacct.c                          | 36 +++++++----
 net/netfilter/xt_physdev.c                         |  6 +-
 net/sched/sch_generic.c                            |  3 +
 net/wireless/nl80211.c                             |  4 +-
 net/xdp/xdp_umem.c                                 |  4 +-
 security/keys/request_key_auth.c                   |  6 ++
 tools/bpf/bpftool/prog.c                           |  4 +-
 tools/power/x86/turbostat/turbostat.c              |  2 +-
 .../x86_energy_perf_policy.c                       | 28 +++++----
 tools/testing/selftests/bpf/test_sock.c            |  7 ++-
 virt/kvm/coalesced_mmio.c                          | 17 ++---
 92 files changed, 561 insertions(+), 290 deletions(-)

From: Pablo Neira Ayuso <[email protected]>

commit 110e48725db6262f260f10727d0fb2d3d25895e4 upstream.

Set up the default timeout for this new entry otherwise the garbage collector might quickly remove it right after the flowtable insertion.

---
 net/netfilter/nf_flow_table_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -203,7 +203,7 @@ int flow_offload_add(struct nf_flowtable
 		return err;
 	}
 
-	flow->timeout = (u32)jiffies;
+	flow->timeout = (u32)jiffies + NF_FLOW_TIMEOUT;
 	return 0;
 }
 EXPORT_SYMBOL_GPL(flow_offload_add);

From: Aaron Armstrong Skomra <[email protected]>

commit 184eccd40389df29abefab88092c4ff33191fd0c upstream.

In the generic code path, HID_DG_CONTACTMAX was previously only read from the second byte of report 0x23.

Another report (0x82) has the HID_DG_CONTACTMAX in the higher nibble of the third byte. We should support reading the value of HID_DG_CONTACTMAX no matter what report we are reading or which position that value is in.

To do this we submit the feature report as a event report using hid_report_raw_event(). Our modified finger event path records the value of HID_DG_CONTACTMAX when it sees that usage.

---
 drivers/hid/wacom_sys.c |   10 ++++++----
 drivers/hid/wacom_wac.c |    4 ++++
 2 files changed, 10 insertions(+), 4 deletions(-)

@@ -282,14 +282,16 @@ static void wacom_feature_mapping(struct
 		/* leave touch_max as is if predefined */
 		if (!features->touch_max) {
 			/* read manually */
-			data = kzalloc(2, GFP_KERNEL);
+			n = hid_report_len(field->report);
+			data = hid_alloc_report_buf(field->report, GFP_KERNEL);
 			if (!data)
 				break;
 			data[0] = field->report->id;
 			ret = wacom_get_report(hdev, HID_FEATURE_REPORT,
-						data, 2, WAC_CMD_RETRIES);
-			if (ret == 2) {
-				features->touch_max = data[1];
+					       data, n, WAC_CMD_RETRIES);
+			if (ret == n) {
+				ret = hid_report_raw_event(hdev,
+					HID_FEATURE_REPORT, data, n, 0);
 			} else {
 				features->touch_max = 16;
 				hid_warn(hdev, "wacom_feature_mapping: "

@@ -2533,6 +2533,7 @@ static void wacom_wac_finger_event(struc
 	struct wacom *wacom = hid_get_drvdata(hdev);
 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
 	unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
+	struct wacom_features *features = &wacom->wacom_wac.features;
 
 	switch (equivalent_usage) {
 	case HID_GD_X:

@@ -2553,6 +2554,9 @@ static void wacom_wac_finger_event(struc
 	case HID_DG_TIPSWITCH:
 		wacom_wac->hid_data.tipswitch = value;
 		break;
+	case HID_DG_CONTACTMAX:
+		features->touch_max = value;
+		return;
 	}
 
 

From: Leon Romanovsky <[email protected]>

commit ed7a01fd3fd77f40b4ef2562b966a5decd8928d2 upstream.

Tracking CM_ID resource is performed in two stages: creation of cm_id and connecting it to the cma_dev. It is needed because rdma-cm protocol exports two separate user-visible calls rdma_create_id and rdma_accept.

At the time of CM_ID creation, the real owner of that object is unknown yet and we need to grab task_struct. This task_struct is released or reassigned in attach phase later on. but call to rdma_destroy_id left this task_struct unreleased.

Such separation is unique to CM_ID and other restrack objects initialize in one shot. It means that it is safe to use "res->valid" check to catch unfinished CM_ID flow and release task_struct for that object.

---
 drivers/infiniband/core/cma.c      |    7 +++----
 drivers/infiniband/core/restrack.c |    6 ++++--
 2 files changed, 7 insertions(+), 6 deletions(-)

@@ -1723,8 +1723,8 @@ void rdma_destroy_id(struct rdma_cm_id *
 	mutex_lock(&id_priv->handler_mutex);
 	mutex_unlock(&id_priv->handler_mutex);
 
+	rdma_restrack_del(&id_priv->res);
 	if (id_priv->cma_dev) {
-		rdma_restrack_del(&id_priv->res);
 		if (rdma_cap_ib_cm(id_priv->id.device, 1)) {
 			if (id_priv->cm_id.ib)
 				ib_destroy_cm_id(id_priv->cm_id.ib);

@@ -3463,10 +3463,9 @@ int rdma_bind_addr(struct rdma_cm_id *id
 
 	return 0;
 err2:
-	if (id_priv->cma_dev) {
-		rdma_restrack_del(&id_priv->res);
+	rdma_restrack_del(&id_priv->res);
+	if (id_priv->cma_dev)
 		cma_release_dev(id_priv);
-	}
 err1:
 	cma_comp_exch(id_priv, RDMA_CM_ADDR_BOUND, RDMA_CM_IDLE);
 	return ret;

@@ -209,7 +209,7 @@ void rdma_restrack_del(struct rdma_restr
 	struct ib_device *dev;
 
 	if (!res->valid)
-		return;
+		goto out;
 
 	dev = res_to_dev(res);
 	if (!dev)

@@ -222,8 +222,10 @@ void rdma_restrack_del(struct rdma_restr
 	down_write(&dev->res.rwsem);
 	hash_del(&res->node);
 	res->valid = false;
+	up_write(&dev->res.rwsem);
+
+out:
 	if (res->task)
 		put_task_struct(res->task);
-	up_write(&dev->res.rwsem);
 }
 EXPORT_SYMBOL(rdma_restrack_del);

Hi!

...

Mainline says this needs additional fix, fe9bc1644918aa1d, see below.

(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Good catch, now queued up, thanks!

greg k-h

From: Benjamin Tissoires <[email protected]>

commit 0c043d70d04711fe6c380df9065fdc44192c49bf upstream.

Looks like the Bios of the Lenovo Legion Y7000 is using ELAN061B when the actual device is supposed to be used with hid-multitouch.

Remove it from the list of the supported device, hoping that no one will complain about the loss in functionality.

---
 drivers/input/mouse/elan_i2c_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1358,7 +1358,7 @@ static const struct acpi_device_id elan_
 	{ "ELAN0618", 0 },
 	{ "ELAN0619", 0 },
 	{ "ELAN061A", 0 },
-	{ "ELAN061B", 0 },
+/*	{ "ELAN061B", 0 }, not working on the Lenovo Legion Y7000 */
 	{ "ELAN061C", 0 },
 	{ "ELAN061D", 0 },
 	{ "ELAN061E", 0 },

From: Aneesh Kumar K.V <[email protected]>

commit 89a3496e0664577043666791ec07fb731d57c950 upstream.

We use mmu_vmemmap_psize to find the page size for mapping the vmmemap area. With radix translation, we are suboptimally setting this value to PAGE_SIZE.

We do check for 2M page size support and update mmu_vmemap_psize to use hugepage size but we suboptimally reset the value to PAGE_SIZE in radix__early_init_mmu(). This resulted in always mapping vmemmap area with 64K page size.

---
 arch/powerpc/mm/pgtable-radix.c |   16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

@@ -521,14 +521,6 @@ void __init radix__early_init_devtree(vo
 	mmu_psize_defs[MMU_PAGE_64K].shift = 16;
 	mmu_psize_defs[MMU_PAGE_64K].ap = 0x5;
 found:
-#ifdef CONFIG_SPARSEMEM_VMEMMAP
-	if (mmu_psize_defs[MMU_PAGE_2M].shift) {
-		/*
-		 * map vmemmap using 2M if available
-		 */
-		mmu_vmemmap_psize = MMU_PAGE_2M;
-	}
-#endif /* CONFIG_SPARSEMEM_VMEMMAP */
 	return;
 }
 

@@ -567,7 +559,13 @@ void __init radix__early_init_mmu(void)
 
 #ifdef CONFIG_SPARSEMEM_VMEMMAP
 	/* vmemmap mapping */
-	mmu_vmemmap_psize = mmu_virtual_psize;
+	if (mmu_psize_defs[MMU_PAGE_2M].shift) {
+		/*
+		 * map vmemmap using 2M if available
+		 */
+		mmu_vmemmap_psize = MMU_PAGE_2M;
+	} else
+		mmu_vmemmap_psize = mmu_virtual_psize;
 #endif
 	/*
 	 * initialize page table size

From: Alan Stern <[email protected]>

commit 3dd550a2d36596a1b0ee7955da3b611c031d3873 upstream.

The syzbot fuzzer provoked a slab-out-of-bounds error in the USB core:

BUG: KASAN: slab-out-of-bounds in memcmp+0xa6/0xb0 lib/string.c:904
Read of size 1 at addr ffff8881d175bed6 by task kworker/0:3/2746

CPU: 0 PID: 2746 Comm: kworker/0:3 Not tainted 5.3.0-rc5+ #28
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xca/0x13e lib/dump_stack.c:113
  print_address_description+0x6a/0x32c mm/kasan/report.c:351
  __kasan_report.cold+0x1a/0x33 mm/kasan/report.c:482
  kasan_report+0xe/0x12 mm/kasan/common.c:612
  memcmp+0xa6/0xb0 lib/string.c:904
  memcmp include/linux/string.h:400 [inline]
  descriptors_changed drivers/usb/core/hub.c:5579 [inline]
  usb_reset_and_verify_device+0x564/0x1300 drivers/usb/core/hub.c:5729
  usb_reset_device+0x4c1/0x920 drivers/usb/core/hub.c:5898
  rt2x00usb_probe+0x53/0x7af

drivers/net/wireless/ralink/rt2x00/rt2x00usb.c:806

The error occurs when the descriptors_changed() routine (called during a device reset) attempts to compare the old and new BOS and capability descriptors. The length it uses for the comparison is the wTotalLength value stored in BOS descriptor, but this value is not necessarily the same as the length actually allocated for the descriptors. If it is larger the routine will call memcmp() with a length that is too big, thus reading beyond the end of the allocated region and leading to this fault.

The kernel reads the BOS descriptor twice: first to get the total length of all the capability descriptors, and second to read it along with all those other descriptors. A malicious (or very faulty) device may send different values for the BOS descriptor fields each time. The memory area will be allocated using the wTotalLength value read the first time, but stored within it will be the value read the second time.

To prevent this possibility from causing any errors, this patch modifies the BOS descriptor after it has been read the second time:
It sets the wTotalLength field to the actual length of the descriptors that were read in and validated. Then the memcpy() call, or any other code using these descriptors, will be able to rely on wTotalLength being valid.

---
 drivers/usb/core/config.c |   12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

@@ -925,7 +925,7 @@ int usb_get_bos_descriptor(struct usb_de
 	struct usb_bos_descriptor *bos;
 	struct usb_dev_cap_header *cap;
 	struct usb_ssp_cap_descriptor *ssp_cap;
-	unsigned char *buffer;
+	unsigned char *buffer, *buffer0;
 	int length, total_len, num, i, ssac;
 	__u8 cap_type;
 	int ret;

@@ -970,10 +970,12 @@ int usb_get_bos_descriptor(struct usb_de
 			ret = -ENOMSG;
 		goto err;
 	}
+
+	buffer0 = buffer;
 	total_len -= length;
+	buffer += length;
 
 	for (i = 0; i < num; i++) {
-		buffer += length;
 		cap = (struct usb_dev_cap_header *)buffer;
 
 		if (total_len < sizeof(*cap) || total_len < cap->bLength) {

@@ -987,8 +989,6 @@ int usb_get_bos_descriptor(struct usb_de
 			break;
 		}
 
-		total_len -= length;
-
 		if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) {
 			dev_warn(ddev, "descriptor type invalid, skip\n");
 			continue;

@@ -1023,7 +1023,11 @@ int usb_get_bos_descriptor(struct usb_de
 		default:
 			break;
 		}
+
+		total_len -= length;
+		buffer += length;
 	}
+	dev->bos->desc->wTotalLength = cpu_to_le16(buffer - buffer0);
 
 	return 0;
 

From: Sean Young <[email protected]>

commit 699bf94114151aae4dceb2d9dbf1a6312839dcae upstream.

The usb_bulk_urb will kfree'd on disconnect, so ensure the pointer is set to NULL after each free.

stop stream
urb killing
urb buffer free
tm6000: got start feed request tm6000_start_feed
tm6000: got start stream request tm6000_start_stream
tm6000: pipe reset
tm6000: got start feed request tm6000_start_feed
tm6000: got start feed request tm6000_start_feed
tm6000: got start feed request tm6000_start_feed
tm6000: got start feed request tm6000_start_feed
tm6000: IR URB failure: status: -71, length 0 xhci_hcd 0000:00:14.0: ERROR unknown event type 37 xhci_hcd 0000:00:14.0: ERROR unknown event type 37
tm6000: error tm6000_urb_received
usb 1-2: USB disconnect, device number 5
tm6000: disconnecting tm6000 #0
==================================================================

BUG: KASAN: use-after-free in dvb_fini+0x75/0x140 [tm6000_dvb]
Read of size 8 at addr ffff888241044060 by task kworker/2:0/22

CPU: 2 PID: 22 Comm: kworker/2:0 Tainted: G        W         5.3.0-rc4+ #1
Hardware name: LENOVO 20KHCTO1WW/20KHCTO1WW, BIOS N23ET65W (1.40 ) 07/02/2019
Workqueue: usb_hub_wq hub_event
Call Trace:
 dump_stack+0x9a/0xf0
 print_address_description.cold+0xae/0x34f
 __kasan_report.cold+0x75/0x93
 ? tm6000_fillbuf+0x390/0x3c0 [tm6000_alsa]
 ? dvb_fini+0x75/0x140 [tm6000_dvb]
 kasan_report+0xe/0x12
 dvb_fini+0x75/0x140 [tm6000_dvb]
 tm6000_close_extension+0x51/0x80 [tm6000]
 tm6000_usb_disconnect.cold+0xd4/0x105 [tm6000]
 usb_unbind_interface+0xe4/0x390
 device_release_driver_internal+0x121/0x250
 bus_remove_device+0x197/0x260
 device_del+0x268/0x550
 ? __device_links_no_driver+0xd0/0xd0
 ? usb_remove_ep_devs+0x30/0x3b
 usb_disable_device+0x122/0x400
 usb_disconnect+0x153/0x430
 hub_event+0x800/0x1e40
 ? trace_hardirqs_on_thunk+0x1a/0x20
 ? hub_port_debounce+0x1f0/0x1f0
 ? retint_kernel+0x10/0x10
 ? lock_is_held_type+0xf1/0x130
 ? hub_port_debounce+0x1f0/0x1f0
 ? process_one_work+0x4ae/0xa00
 process_one_work+0x4ba/0xa00
 ? pwq_dec_nr_in_flight+0x160/0x160
 ? do_raw_spin_lock+0x10a/0x1d0
 worker_thread+0x7a/0x5c0
 ? process_one_work+0xa00/0xa00
 kthread+0x1d5/0x200
 ? kthread_create_worker_on_cpu+0xd0/0xd0
 ret_from_fork+0x3a/0x50

Allocated by task 2682:
 save_stack+0x1b/0x80
 __kasan_kmalloc.constprop.0+0xc2/0xd0
 usb_alloc_urb+0x28/0x60
 tm6000_start_feed+0x10a/0x300 [tm6000_dvb]
 dmx_ts_feed_start_filtering+0x86/0x120 [dvb_core]
 dvb_dmxdev_start_feed+0x121/0x180 [dvb_core]
 dvb_dmxdev_filter_start+0xcb/0x540 [dvb_core]
 dvb_demux_do_ioctl+0x7ed/0x890 [dvb_core]
 dvb_usercopy+0x97/0x1f0 [dvb_core]
 dvb_demux_ioctl+0x11/0x20 [dvb_core]
 do_vfs_ioctl+0x5d8/0x9d0
 ksys_ioctl+0x5e/0x90
 __x64_sys_ioctl+0x3d/0x50
 do_syscall_64+0x74/0xe0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 22:
 save_stack+0x1b/0x80
 __kasan_slab_free+0x12c/0x170
 kfree+0xfd/0x3a0
 xhci_giveback_urb_in_irq+0xfe/0x230
 xhci_td_cleanup+0x276/0x340
 xhci_irq+0x1129/0x3720
 __handle_irq_event_percpu+0x6e/0x420
 handle_irq_event_percpu+0x6f/0x100
 handle_irq_event+0x55/0x84
 handle_edge_irq+0x108/0x3b0
 handle_irq+0x2e/0x40
 do_IRQ+0x83/0x1a0

---
 drivers/media/usb/tm6000/tm6000-dvb.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -105,6 +105,7 @@ static void tm6000_urb_received(struct u
 			printk(KERN_ERR "tm6000:  error %s\n", __func__);
 			kfree(urb->transfer_buffer);
 			usb_free_urb(urb);
+			dev->dvb->bulk_urb = NULL;
 		}
 	}
 }

@@ -135,6 +136,7 @@ static int tm6000_start_stream(struct tm
 	dvb->bulk_urb->transfer_buffer = kzalloc(size, GFP_KERNEL);
 	if (!dvb->bulk_urb->transfer_buffer) {
 		usb_free_urb(dvb->bulk_urb);
+		dvb->bulk_urb = NULL;
 		return -ENOMEM;
 	}
 

@@ -161,6 +163,7 @@ static int tm6000_start_stream(struct tm
 
 		kfree(dvb->bulk_urb->transfer_buffer);
 		usb_free_urb(dvb->bulk_urb);
+		dvb->bulk_urb = NULL;
 		return ret;
 	}
 

From: Yoshihiro Shimoda <[email protected]>

commit e6839c31a608e79f2057fab987dd814f5d3477e6 upstream.

The hardware manual should be revised, but the initial value of VBCTRL.OCCLREN is set to 1 actually. If the bit is set, the hardware clears VBCTRL.VBOUT and ADPCTRL.DRVVBUS registers automatically when the hardware detects over-current signal from a USB power switch. However, since the hardware doesn't have any registers which indicates over-current, the driver cannot handle it at all. So, if "is_otg_channel" hardware detects over-current, since ADPCTRL.DRVVBUS register is cleared automatically, the channel cannot be used after that.

To resolve this behavior, this patch sets the VBCTRL.OCCLREN to 0 to keep ADPCTRL.DRVVBUS even if the "is_otg_channel" hardware detects over-current. (We assume a USB power switch itself protects over-current and turns the VBUS off.)

This patch is inspired by a BSP patch from Kazuya Mizuguchi.

---
 drivers/phy/renesas/phy-rcar-gen3-usb2.c |    2 ++
 1 file changed, 2 insertions(+)

@@ -66,6 +66,7 @@
 					 USB2_OBINT_IDDIGCHG)
 
 /* VBCTRL */
+#define USB2_VBCTRL_OCCLREN		BIT(16)
 #define USB2_VBCTRL_DRVVBUSSEL		BIT(8)
 
 /* LINECTRL1 */

@@ -289,6 +290,7 @@ static void rcar_gen3_init_otg(struct rc
 	u32 val;
 
 	val = readl(usb2_base + USB2_VBCTRL);
+	val &= ~USB2_VBCTRL_OCCLREN;
 	writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
 	writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
 	val = readl(usb2_base + USB2_OBINTEN);

From: Xin Long <[email protected]>

[ Upstream commit 28e486037747c2180470b77c290d4090ad42f259 ]

In ip6erspan_tunnel_xmit(), if the skb will not be sent out, it has to be freed on the tx_err path. Otherwise when deleting a netns, it would cause dst/dev to leak, and dmesg shows:

unregister_netdevice: waiting for lo to become free. Usage count = 1

---
 net/ipv6/ip6_gre.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -988,7 +988,7 @@ static netdev_tx_t ip6erspan_tunnel_xmit
 		if (unlikely(!tun_info ||
 			     !(tun_info->mode & IP_TUNNEL_INFO_TX) ||
 			     ip_tunnel_info_af(tun_info) != AF_INET6))
-			return -EINVAL;
+			goto tx_err;
 
 		key = &tun_info->key;
 		memset(&fl6, 0, sizeof(fl6));

From: Willem de Bruijn <[email protected]>

[ Upstream commit acdcecc61285faed359f1a3568c32089cc3a8329 ]

UDP reuseport groups can hold a mix unconnected and connected sockets. Ensure that connections only receive all traffic to their 4-tuple.

Fast reuseport returns on the first reuseport match on the assumption that all matches are equal. Only if connections are present, return to the previous behavior of scoring all sockets.

Record if connections are present and if so (1) treat such connected sockets as an independent match from the group, (2) only return 2-tuple matches from reuseport and (3) do not return on the first 2-tuple reuseport match to allow for a higher scoring match later.

New field has_conns is set without locks. No other fields in the bitmap are modified at runtime and the field is only ever set unconditionally, so an RMW cannot miss a change.

---
 include/net/sock_reuseport.h |   21 ++++++++++++++++++++-
 net/core/sock_reuseport.c    |   15 +++++++++++++--
 net/ipv4/datagram.c          |    2 ++
 net/ipv4/udp.c               |    5 +++--
 net/ipv6/datagram.c          |    2 ++
 net/ipv6/udp.c               |    5 +++--
 6 files changed, 43 insertions(+), 7 deletions(-)

@@ -21,7 +21,8 @@ struct sock_reuseport {
 	unsigned int		synq_overflow_ts;
 	/* ID stays the same even after the size of socks[] grows. */
 	unsigned int		reuseport_id;
-	bool			bind_inany;
+	unsigned int		bind_inany:1;
+	unsigned int		has_conns:1;
 	struct bpf_prog __rcu	*prog;		/* optional BPF sock selector */
 	struct sock		*socks[0];	/* array of sock pointers */
 };

@@ -35,6 +36,24 @@ extern struct sock *reuseport_select_soc
 					  struct sk_buff *skb,
 					  int hdr_len);
 extern int reuseport_attach_prog(struct sock *sk, struct bpf_prog *prog);
+
+static inline bool reuseport_has_conns(struct sock *sk, bool set)
+{
+	struct sock_reuseport *reuse;
+	bool ret = false;
+
+	rcu_read_lock();
+	reuse = rcu_dereference(sk->sk_reuseport_cb);
+	if (reuse) {
+		if (set)
+			reuse->has_conns = 1;
+		ret = reuse->has_conns;
+	}
+	rcu_read_unlock();
+
+	return ret;
+}
+
 int reuseport_get_id(struct sock_reuseport *reuse);
 
 #endif  /* _SOCK_REUSEPORT_H */

@@ -292,8 +292,19 @@ struct sock *reuseport_select_sock(struc
 
 select_by_hash:
 		/* no bpf or invalid bpf result: fall back to hash usage */
-		if (!sk2)
-			sk2 = reuse->socks[reciprocal_scale(hash, socks)];
+		if (!sk2) {
+			int i, j;
+
+			i = j = reciprocal_scale(hash, socks);
+			while (reuse->socks[i]->sk_state == TCP_ESTABLISHED) {
+				i++;
+				if (i >= reuse->num_socks)
+					i = 0;
+				if (i == j)
+					goto out;
+			}
+			sk2 = reuse->socks[i];
+		}
 	}
 
 out:

@@ -19,6 +19,7 @@
 #include <net/sock.h>
 #include <net/route.h>
 #include <net/tcp_states.h>
+#include <net/sock_reuseport.h>
 
 int __ip4_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
 {

@@ -73,6 +74,7 @@ int __ip4_datagram_connect(struct sock *
 	}
 	inet->inet_daddr = fl4->daddr;
 	inet->inet_dport = usin->sin_port;
+	reuseport_has_conns(sk, true);
 	sk->sk_state = TCP_ESTABLISHED;
 	sk_set_txhash(sk);
 	inet->inet_id = jiffies;

@@ -443,12 +443,13 @@ static struct sock *udp4_lib_lookup2(str
 		score = compute_score(sk, net, saddr, sport,
 				      daddr, hnum, dif, sdif, exact_dif);
 		if (score > badness) {
-			if (sk->sk_reuseport) {
+			if (sk->sk_reuseport &&
+			    sk->sk_state != TCP_ESTABLISHED) {
 				hash = udp_ehashfn(net, daddr, hnum,
 						   saddr, sport);
 				result = reuseport_select_sock(sk, hash, skb,
 							sizeof(struct udphdr));
-				if (result)
+				if (result && !reuseport_has_conns(sk, false))
 					return result;
 			}
 			badness = score;

@@ -31,6 +31,7 @@
 #include <net/ip6_route.h>
 #include <net/tcp_states.h>
 #include <net/dsfield.h>
+#include <net/sock_reuseport.h>
 
 #include <linux/errqueue.h>
 #include <linux/uaccess.h>

@@ -258,6 +259,7 @@ ipv4_connected:
 		goto out;
 	}
 
+	reuseport_has_conns(sk, true);
 	sk->sk_state = TCP_ESTABLISHED;
 	sk_set_txhash(sk);
 out:

@@ -177,13 +177,14 @@ static struct sock *udp6_lib_lookup2(str
 		score = compute_score(sk, net, saddr, sport,
 				      daddr, hnum, dif, sdif, exact_dif);
 		if (score > badness) {
-			if (sk->sk_reuseport) {
+			if (sk->sk_reuseport &&
+			    sk->sk_state != TCP_ESTABLISHED) {
 				hash = udp6_ehashfn(net, daddr, hnum,
 						    saddr, sport);
 
 				result = reuseport_select_sock(sk, hash, skb,
 							sizeof(struct udphdr));
-				if (result)
+				if (result && !reuseport_has_conns(sk, false))
 					return result;
 			}
 			result = sk;

That's an ... extremely tricky game with concurrent access. I'm pretty sure it is not valid C, but maybe it is acceptable for kernel.

(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

From: Dongli Zhang <[email protected]>

[ Upstream commit 00b368502d18f790ab715e055869fd4bb7484a9b ]

When skb_shinfo(skb) is not able to cache extra fragment (that is, skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS), xennet_fill_frags() assumes the sk_buff_head list is already empty. As a result, cons is increased only by 1 and returns to error handling path in xennet_poll().

However, if the sk_buff_head list is not empty, queue->rx.rsp_cons may be set incorrectly. That is, queue->rx.rsp_cons would point to the rx ring buffer entries whose queue->rx_skbs[i] and queue->grant_rx_ref[i] are already cleared to NULL. This leads to NULL pointer access in the next iteration to process rx ring buffer entries.

Below is how xennet_poll() does error handling. All remaining entries in tmpq are accounted to queue->rx.rsp_cons without assuming how many outstanding skbs are remained in the list.

985 static int xennet_poll(struct napi_struct *napi, int budget)
... ...
1032 if (unlikely(xennet_set_skb_gso(skb, gso))) {

1033                   __skb_queue_head(&tmpq, skb);
1034                   queue->rx.rsp_cons += skb_queue_len(&tmpq);
1035                   goto err;

1036 }

It is better to always have the error handling in the same way.

---
 drivers/net/xen-netfront.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -909,7 +909,7 @@ static RING_IDX xennet_fill_frags(struct
 			__pskb_pull_tail(skb, pull_to - skb_headlen(skb));
 		}
 		if (unlikely(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS)) {
-			queue->rx.rsp_cons = ++cons;
+			queue->rx.rsp_cons = ++cons + skb_queue_len(list);
 			kfree_skb(nskb);
 			return ~0U;
 		}

From: Cong Wang <[email protected]>

[ Upstream commit 6efb971ba8edfbd80b666f29de12882852f095ae ]

When tcf_block_get() fails in sfb_init(), q->qdisc is still a NULL pointer which leads to a crash in sfb_destroy(). Similar for sch_dsmark.

Instead of fixing each separately, Linus suggested to just accept NULL pointer in qdisc_put(), which would make callers easier.

(For sch_dsmark, the bug probably exists long before commit 6529eaba33f0.)

---
 net/sched/sch_generic.c |    3 +++
 1 file changed, 3 insertions(+)

@@ -950,6 +950,9 @@ void qdisc_destroy(struct Qdisc *qdisc)
 	const struct Qdisc_ops  *ops = qdisc->ops;
 	struct sk_buff *skb, *tmp;
 
+	if (!qdisc)
+		return;
+
 	if (qdisc->flags & TCQ_F_BUILTIN ||
 	    !refcount_dec_and_test(&qdisc->refcnt))
 		return;

From: Matt Delco <[email protected]>

commit b60fe990c6b07ef6d4df67bc0530c7c90a62623a upstream.

The first/last indexes are typically shared with a user app. The app can change the 'last' index that the kernel uses to store the next result. This change sanity checks the index before using it for writing to a potentially arbitrary address.

This fixes CVE-2019-14821.

---
 virt/kvm/coalesced_mmio.c |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

@@ -40,7 +40,7 @@ static int coalesced_mmio_in_range(struc
 	return 1;
 }
 
-static int coalesced_mmio_has_room(struct kvm_coalesced_mmio_dev *dev)
+static int coalesced_mmio_has_room(struct kvm_coalesced_mmio_dev *dev, u32 last)
 {
 	struct kvm_coalesced_mmio_ring *ring;
 	unsigned avail;

@@ -52,7 +52,7 @@ static int coalesced_mmio_has_room(struc
 	 * there is always one unused entry in the buffer
 	 */
 	ring = dev->kvm->coalesced_mmio_ring;
-	avail = (ring->first - ring->last - 1) % KVM_COALESCED_MMIO_MAX;
+	avail = (ring->first - last - 1) % KVM_COALESCED_MMIO_MAX;
 	if (avail == 0) {
 		/* full */
 		return 0;

@@ -67,24 +67,27 @@ static int coalesced_mmio_write(struct k
 {
 	struct kvm_coalesced_mmio_dev *dev = to_mmio(this);
 	struct kvm_coalesced_mmio_ring *ring = dev->kvm->coalesced_mmio_ring;
+	__u32 insert;
 
 	if (!coalesced_mmio_in_range(dev, addr, len))
 		return -EOPNOTSUPP;
 
 	spin_lock(&dev->kvm->ring_lock);
 
-	if (!coalesced_mmio_has_room(dev)) {
+	insert = READ_ONCE(ring->last);
+	if (!coalesced_mmio_has_room(dev, insert) ||
+	    insert >= KVM_COALESCED_MMIO_MAX) {
 		spin_unlock(&dev->kvm->ring_lock);
 		return -EOPNOTSUPP;
 	}
 
 	/* copy data in first free entry of the ring */
 
-	ring->coalesced_mmio[ring->last].phys_addr = addr;
-	ring->coalesced_mmio[ring->last].len = len;
-	memcpy(ring->coalesced_mmio[ring->last].data, val, len);
+	ring->coalesced_mmio[insert].phys_addr = addr;
+	ring->coalesced_mmio[insert].len = len;
+	memcpy(ring->coalesced_mmio[insert].data, val, len);
 	smp_wmb();
-	ring->last = (ring->last + 1) % KVM_COALESCED_MMIO_MAX;
+	ring->last = (insert + 1) % KVM_COALESCED_MMIO_MAX;
 	spin_unlock(&dev->kvm->ring_lock);
 	return 0;
 }

From: Hung-Te Lin <[email protected]>

commit 4b708b7b1a2c09fbdfff6b942ebe3a160213aacd upstream.

The VPD implementation from Chromium Vital Product Data project used to parse data from untrusted input without checking if the meta data is invalid or corrupted. For example, the size from decoded content may be negative value, or larger than whole input buffer. Such invalid data may cause buffer overflow.

To fix that, the size parameters passed to vpd_decode functions should be changed to unsigned integer (u32) type, and the parsing of entry header should be refactored so every size field is correctly verified before starting to decode.

---
 drivers/firmware/google/vpd.c        |    4 +-
 drivers/firmware/google/vpd_decode.c |   55 ++++++++++++++++++++---------------
 drivers/firmware/google/vpd_decode.h |    6 +--
 3 files changed, 37 insertions(+), 28 deletions(-)

@@ -100,8 +100,8 @@ static int vpd_section_check_key_name(co
 	return VPD_OK;
 }
 
-static int vpd_section_attrib_add(const u8 *key, s32 key_len,
-				  const u8 *value, s32 value_len,
+static int vpd_section_attrib_add(const u8 *key, u32 key_len,
+				  const u8 *value, u32 value_len,
 				  void *arg)
 {
 	int ret;

@@ -33,8 +33,8 @@ enum {
 };
 
 /* Callback for vpd_decode_string to invoke. */
-typedef int vpd_decode_callback(const u8 *key, s32 key_len,
-				const u8 *value, s32 value_len,
+typedef int vpd_decode_callback(const u8 *key, u32 key_len,
+				const u8 *value, u32 value_len,
 				void *arg);
 
 /*

@@ -52,7 +52,7 @@ typedef int vpd_decode_callback(const u8
  * If one entry is successfully decoded, sends it to callback and returns the
  * result.
  */
-int vpd_decode_string(const s32 max_len, const u8 *input_buf, s32 *consumed,
+int vpd_decode_string(const u32 max_len, const u8 *input_buf, u32 *consumed,
 		      vpd_decode_callback callback, void *callback_arg);
 
 #endif  /* __VPD_DECODE_H */

From: Chunyan Zhang <[email protected]>

commit 9c801e313195addaf11c16e155f50789d6ebfd19 upstream.

The sequence of arguments which was passed to handle_lsr_errors() didn't match the parameters defined in that function, &lsr was passed to flag and &flag was passed to lsr, this patch fixed that.

---
 drivers/tty/serial/sprd_serial.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -232,7 +232,7 @@ static inline void sprd_rx(struct uart_p
 
 		if (lsr & (SPRD_LSR_BI | SPRD_LSR_PE |
 			SPRD_LSR_FE | SPRD_LSR_OE))
-			if (handle_lsr_errors(port, &lsr, &flag))
+			if (handle_lsr_errors(port, &flag, &lsr))
 				continue;
 		if (uart_handle_sysrq_char(port, ch))
 			continue;

From: Razvan Stefanescu <[email protected]>

commit d2ace81bf902a9f11d52e59e5d232d2255a0e353 upstream.

When half-duplex RS485 communication is used, after RX is started, TX tasklet still needs to be scheduled tasklet. This avoids console freezing when more data is to be transmitted, if the serial communication is not closed.

---
 drivers/tty/serial/atmel_serial.c |    1 -
 1 file changed, 1 deletion(-)

@@ -1270,7 +1270,6 @@ atmel_handle_transmit(struct uart_port *
 
 			atmel_port->hd_start_rx = false;
 			atmel_start_rx(port);
-			return;
 		}
 
 		atmel_tasklet_schedule(atmel_port, &atmel_port->tasklet_tx);

From: Wen Huang <[email protected]>

commit 7caac62ed598a196d6ddf8d9c121e12e082cac3a upstream.

mwifiex_update_vs_ie(),mwifiex_set_uap_rates() and mwifiex_set_wmm_params() call memcpy() without checking the destination size.Since the source is given from user-space, this may trigger a heap buffer overflow.

Fix them by putting the length check before performing memcpy().

This fix addresses CVE-2019-14814,CVE-2019-14815,CVE-2019-14816.

---
 drivers/net/wireless/marvell/mwifiex/ie.c      |    3 +++
 drivers/net/wireless/marvell/mwifiex/uap_cmd.c |    9 ++++++++-
 2 files changed, 11 insertions(+), 1 deletion(-)

@@ -241,6 +241,9 @@ static int mwifiex_update_vs_ie(const u8
 		}
 
 		vs_ie = (struct ieee_types_header *)vendor_ie;
+		if (le16_to_cpu(ie->ie_length) + vs_ie->len + 2 >
+			IEEE_MAX_IE_SIZE)
+			return -EINVAL;
 		memcpy(ie->ie_buffer + le16_to_cpu(ie->ie_length),
 		       vs_ie, vs_ie->len + 2);
 		le16_unaligned_add_cpu(&ie->ie_length, vs_ie->len + 2);

@@ -265,6 +265,8 @@ mwifiex_set_uap_rates(struct mwifiex_uap
 
 	rate_ie = (void *)cfg80211_find_ie(WLAN_EID_SUPP_RATES, var_pos, len);
 	if (rate_ie) {
+		if (rate_ie->len > MWIFIEX_SUPPORTED_RATES)
+			return;
 		memcpy(bss_cfg->rates, rate_ie + 1, rate_ie->len);
 		rate_len = rate_ie->len;
 	}

@@ -272,8 +274,11 @@ mwifiex_set_uap_rates(struct mwifiex_uap
 	rate_ie = (void *)cfg80211_find_ie(WLAN_EID_EXT_SUPP_RATES,
 					   params->beacon.tail,
 					   params->beacon.tail_len);
-	if (rate_ie)
+	if (rate_ie) {
+		if (rate_ie->len > MWIFIEX_SUPPORTED_RATES - rate_len)
+			return;
 		memcpy(bss_cfg->rates + rate_len, rate_ie + 1, rate_ie->len);
+	}
 
 	return;
 }

@@ -391,6 +396,8 @@ mwifiex_set_wmm_params(struct mwifiex_pr
 					    params->beacon.tail_len);
 	if (vendor_ie) {
 		wmm_ie = vendor_ie;
+		if (*(wmm_ie + 1) > sizeof(struct mwifiex_types_wmm_info))
+			return;
 		memcpy(&bss_cfg->wmm_info, wmm_ie +
 		       sizeof(struct ieee_types_header), *(wmm_ie + 1));
 		priv->wmm_enabled = 1;

From: Masashi Honma <[email protected]>

commit 4b2c5a14cd8005a900075f7dfec87473c6ee66fb upstream.

commit 1222a1601488 ("nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds") was incomplete and requires one more fix to prevent accessing to rssi_thresholds[n] because user can control rssi_thresholds[i] values to make i reach to n. For example, rssi_thresholds = {-400, -300, -200, -100} when last is -34.

---
 net/wireless/nl80211.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

@@ -10270,9 +10270,11 @@ static int cfg80211_cqm_rssi_update(stru
 	hyst = wdev->cqm_config->rssi_hyst;
 	n = wdev->cqm_config->n_rssi_thresholds;
 
-	for (i = 0; i < n; i++)
+	for (i = 0; i < n; i++) {
+		i = array_index_nospec(i, n);
 		if (last < wdev->cqm_config->rssi_thresholds[i])
 			break;
+	}
 
 	low_index = i - 1;
 	if (low_index >= 0) {

Hi!

(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

From: YueHaibing <[email protected]>

[ Upstream commit 1cbbbf39efab05fae67f59e6ed01bb85061c69e2 ]

KASAN report this:

BUG: unable to handle kernel paging request at fffffbfff834f001
PGD 237fe8067 P4D 237fe8067 PUD 237e64067 PMD 1c968d067 PTE 0
Oops: 0000 [#1] SMP KASAN PTI
CPU: 1 PID: 8871 Comm: syz-executor.0 Tainted: G         C        5.0.0+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:strcmp+0x31/0xa0 lib/string.c:328
Code: 00 00 00 00 fc ff df 55 53 48 83 ec 08 eb 0a 84 db 48 89 ef 74 5a 4c 89 e6 48 89 f8 48 89 fa 48 8d 6f 01 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 04 84 c0 75 50 48 89 f0 48 89 f2 0f b6 5d
RSP: 0018:ffff8881e0c57800 EFLAGS: 00010246
RAX: 1ffffffff834f001 RBX: ffffffffc1a78000 RCX: ffffffff827b9503
RDX: 0000000000000000 RSI: ffffffffc1a40008 RDI: ffffffffc1a78008
RBP: ffffffffc1a78009 R08: fffffbfff6a92195 R09: fffffbfff6a92195
R10: ffff8881e0c578b8 R11: fffffbfff6a92194 R12: ffffffffc1a40008
R13: dffffc0000000000 R14: ffffffffc1a3e470 R15: ffffffffc1a40000
FS:  00007fdcc02ff700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff834f001 CR3: 00000001b3134003 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 genl_family_find_byname+0x7f/0xf0 net/netlink/genetlink.c:104
 genl_register_family+0x1e1/0x1070 net/netlink/genetlink.c:333
 ? 0xffffffffc1978000
 hwsim_init_module+0x6a/0x1000 [mac802154_hwsim]
 ? 0xffffffffc1978000
 ? 0xffffffffc1978000
 ? 0xffffffffc1978000
 do_one_initcall+0xbc/0x47d init/main.c:887
 do_init_module+0x1b5/0x547 kernel/module.c:3456
 load_module+0x6405/0x8c10 kernel/module.c:3804
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898
 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fdcc02fec58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003
RBP: 00007fdcc02fec70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fdcc02ff6bc
R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004
Modules linked in: mac802154_hwsim(+) mac802154 ieee802154 speakup(C) rc_proteus_2309 rtc_rk808 streebog_generic rds vboxguest madera_spi madera da9052_wdt mISDN_core ueagle_atm usbatm atm ir_imon_decoder scsi_transport_sas rc_dntv_live_dvb_t panel_samsung_s6d16d0 drm drm_panel_orientation_quirks lib80211 fb_agm1264k_fl(C) gspca_pac7302 gspca_main videobuf2_v4l2 soundwire_intel_init i2c_dln2 dln2 usbcore hid_gaff 88pm8607 nfnetlink axp20x_i2c axp20x uio pata_marvell pmbus_core snd_sonicvibes gameport snd_pcm snd_opl3_lib snd_timer snd_hwdep snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore rtc_ds1511 rtc_ds1742 vsock dwc_xlgmac rtc_rx8010 libphy twofish_x86_64_3way twofish_x86_64 twofish_common ad5696_i2c ad5686 lp8788_charger cxd2880_spi dvb_core videobuf2_common videodev media videobuf2_vmalloc videobuf2_memops fbtft(C) sysimgblt sysfillrect syscopyarea fb_sys_fops janz_ican3 firewire_net firewire_core crc_itu_t spi_slave_system_control i2c_matroxfb i2c_algo_bit
 matroxfb_base fb fbdev matroxfb_DAC1064 matroxfb_accel cfbcopyarea cfbimgblt cfbfillrect matroxfb_Ti3026 matroxfb_g450 g450_pll matroxfb_misc leds_blinkm ti_dac7311 intel_spi_pci intel_spi spi_nor hid_elan hid async_tx rc_cinergy_1400 rc_core intel_ishtp kxcjk_1013 industrialio_triggered_buffer kfifo_buf can_dev intel_th spi_pxa2xx_platform pata_artop vme_ca91cx42 gb_gbphy(C) greybus(C) industrialio mptbase st_drv cmac ttpci_eeprom via_wdt gpio_xra1403 mtd iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 input_leds crypto_simd cryptd glue_helper ide_pci_generic piix psmouse
 ide_core serio_raw ata_generic i2c_piix4 pata_acpi parport_pc parport floppy rtc_cmos intel_agp intel_gtt agpgart sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: speakup]
Dumping ftrace buffer:
   (ftrace buffer empty)
CR2: fffffbfff834f001
---[ end trace 5aa772c793e0e971 ]---
RIP: 0010:strcmp+0x31/0xa0 lib/string.c:328
Code: 00 00 00 00 fc ff df 55 53 48 83 ec 08 eb 0a 84 db 48 89 ef 74 5a 4c 89 e6 48 89 f8 48 89 fa 48 8d 6f 01 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 04 84 c0 75 50 48 89 f0 48 89 f2 0f b6 5d
RSP: 0018:ffff8881e0c57800 EFLAGS: 00010246
RAX: 1ffffffff834f001 RBX: ffffffffc1a78000 RCX: ffffffff827b9503
RDX: 0000000000000000 RSI: ffffffffc1a40008 RDI: ffffffffc1a78008
RBP: ffffffffc1a78009 R08: fffffbfff6a92195 R09: fffffbfff6a92195
R10: ffff8881e0c578b8 R11: fffffbfff6a92194 R12: ffffffffc1a40008
R13: dffffc0000000000 R14: ffffffffc1a3e470 R15: ffffffffc1a40000
FS:  00007fdcc02ff700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: fffffbfff834f001 CR3: 00000001b3134003 CR4: 00000000007606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

PKRU: 55555554

The error handing path misplace the cleanup in hwsim_init_module, switch the two cleanup functions to fix above issues.

---
 drivers/net/ieee802154/mac802154_hwsim.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index f1ed1744801c7..20b4c0c21e36a 100644
@@ -920,9 +920,9 @@ static __init int hwsim_init_module(void)
 	return 0;
 
 platform_drv:
-	genl_unregister_family(&hwsim_genl_family);
-platform_dev:
 	platform_device_unregister(mac802154hwsim_dev);
+platform_dev:
+	genl_unregister_family(&hwsim_genl_family);
 	return rc;
 }
 

2.20.1

From: YueHaibing <[email protected]>

[ Upstream commit de166bbe861738c8bc3e5dad5b03f45d7d6ef914 ]

KASAN report this:

kernel BUG at net/mac802154/main.c:130!
invalid opcode: 0000 [#1] PREEMPT SMP

CPU: 0 PID: 19932 Comm: modprobe Not tainted 5.1.0-rc6+ #22
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:ieee802154_free_hw+0x2a/0x30 [mac802154]
Code: 55 48 8d 57 38 48 89 e5 53 48 89 fb 48 8b 47 38 48 39 c2 75 15 48 8d 7f 48 e8 82 85 16 e1 48 8b 7b 28 e8 f9 ef 83 e2 5b 5d c3 <0f> 0b 0f 1f 40 00 55 48 89 e5 53 48 89 fb 0f b6 86 80 00 00 00 88
RSP: 0018:ffffc90001c7b9f0 EFLAGS: 00010206
RAX: ffff88822df3aa80 RBX: ffff88823143d5c0 RCX: 0000000000000002
RDX: ffff88823143d5f8 RSI: ffff88822b1fabc0 RDI: ffff88823143d5c0
RBP: ffffc90001c7b9f8 R08: 0000000000000000 R09: 0000000000000001
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffff4
R13: ffff88822dea4f50 R14: ffff88823143d7c0 R15: 00000000fffffff4
FS: 00007ff52e999540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fdc06dba768 CR3: 000000023160a000 CR4: 00000000000006f0
Call Trace:
 hwsim_add_one+0x2dd/0x540 [mac802154_hwsim]
 hwsim_probe+0x2f/0xb0 [mac802154_hwsim]
 platform_drv_probe+0x3a/0x90
 ? driver_sysfs_add+0x79/0xb0
 really_probe+0x1d4/0x2d0
 driver_probe_device+0x50/0xf0
 device_driver_attach+0x54/0x60
 __driver_attach+0x7e/0xd0
 ? device_driver_attach+0x60/0x60
 bus_for_each_dev+0x68/0xc0
 driver_attach+0x19/0x20
 bus_add_driver+0x15e/0x200
 driver_register+0x5b/0xf0
 __platform_driver_register+0x31/0x40
 hwsim_init_module+0x74/0x1000 [mac802154_hwsim]
 ? 0xffffffffa00e9000
 do_one_initcall+0x6c/0x3cc
 ? kmem_cache_alloc_trace+0x248/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7ff52e4a2839
Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffffa7b3c08 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 00005647560a2a00 RCX: 00007ff52e4a2839
RDX: 0000000000000000 RSI: 00005647547f3c2e RDI: 0000000000000003
RBP: 00005647547f3c2e R08: 0000000000000000 R09: 00005647560a2a00
R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000
R13: 00005647560a2c10 R14: 0000000000040000 R15: 00005647560a2a00
Modules linked in: mac802154_hwsim(+) mac802154 [last unloaded: mac802154_hwsim]

In hwsim_add_one, if hwsim_subscribe_all_others fails, we should call ieee802154_unregister_hw to free resources.

---
 drivers/net/ieee802154/mac802154_hwsim.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index 20b4c0c21e36a..be1f1a86bcd61 100644
@@ -821,7 +821,7 @@ static int hwsim_add_one(struct genl_info *info, struct device *dev,
 		err = hwsim_subscribe_all_others(phy);
 		if (err < 0) {
 			mutex_unlock(&hwsim_phys_lock);
-			goto err_reg;
+			goto err_subscribe;
 		}
 	}
 	list_add_tail(&phy->list, &hwsim_phys);

@@ -831,6 +831,8 @@ static int hwsim_add_one(struct genl_info *info, struct device *dev,
 
 	return idx;
 
+err_subscribe:
+	ieee802154_unregister_hw(phy->hw);
 err_reg:
 	kfree(pib);
 err_pib:

2.20.1

From: Faiz Abbas <[email protected]>

[ Upstream commit fb59ee37cfe20d10d19568899d1458a58361246c ]

If UHS speed modes are enabled, a compatible SD card switches down to 1.8V during enumeration. If after this a software reboot/crash takes place and on-chip ROM tries to enumerate the SD card, the difference in IO voltages (host @ 3.3V and card @ 1.8V) may end up damaging the card.

The fix for this is to have support for power cycling the card in hardware (with a PORz/soft-reset line causing a power cycle of the card). Because the beaglebone X15 (rev A,B and C), am57xx-idks and am57xx-evms don't have this capability, disable voltage switching for these boards.

The major effect of this is that the maximum supported speed mode is now high speed(50 MHz) down from SDR104(200 MHz).

commit 88a748419b84 ("ARM: dts: am57xx-idk: Remove support for voltage switching for SD card") did this only for idk boards. Do it for all affected boards.

---
 arch/arm/boot/dts/am571x-idk.dts                | 7 +------
 arch/arm/boot/dts/am572x-idk.dts                | 7 +------
 arch/arm/boot/dts/am574x-idk.dts                | 7 +------
 arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 1 +
 arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts   | 7 +------
 arch/arm/boot/dts/am57xx-beagle-x15-revc.dts    | 7 +------
 6 files changed, 6 insertions(+), 30 deletions(-)

index d9a2049a1ea8a..6bebedfc0f35a 100644
@@ -98,14 +98,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
 };
 
 &mmc2 {

index 3ef9111d0e8ba..9235173edbd3a 100644
@@ -20,14 +20,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
 };
 
 &mmc2 {

index 378dfa780ac17..ae43de3297f4f 100644
@@ -24,14 +24,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_default>;
-	pinctrl-3 = <&mmc1_pins_hs>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_conf>;
-	pinctrl-6 = <&mmc1_pins_ddr50 &mmc1_iodelay_sdr104_conf>;
 };
 
 &mmc2 {

index ad953113cefbd..d53532b479475 100644
@@ -433,6 +433,7 @@
 
 	bus-width = <4>;
 	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+	no-1-8-v;
 };
 
 &mmc2 {

index 5a77b334923d0..34c69965821bb 100644
@@ -19,14 +19,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
 	vmmc-supply = <&vdd_3v3>;
 	vqmmc-supply = <&ldo1_reg>;
 };

index 17c41da3b55f1..ccd99160bbdfb 100644
@@ -19,14 +19,9 @@
 };
 
 &mmc1 {
-	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default>;
 	pinctrl-1 = <&mmc1_pins_hs>;
-	pinctrl-2 = <&mmc1_pins_sdr12>;
-	pinctrl-3 = <&mmc1_pins_sdr25>;
-	pinctrl-4 = <&mmc1_pins_sdr50>;
-	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
-	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
 	vmmc-supply = <&vdd_3v3>;
 	vqmmc-supply = <&ldo1_reg>;
 };

2.20.1

From: Tony Lindgren <[email protected]>

[ Upstream commit afd58b162e48076e3fe66d08a69eefbd6fe71643 ]

TRM says PWMSS_SYSCONFIG bit for SOFTRESET changes to zero when reset is completed. Let's configure it as otherwise we get warnings on boot when we check the data against dts provided data. Eventually the legacy platform data will be just dropped, but let's fix the warning first.

---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index e6c7061a8e736..3547f32822b64 100644
@@ -385,7 +385,8 @@ static struct omap_hwmod dra7xx_dcan2_hwmod = {
 static struct omap_hwmod_class_sysconfig dra7xx_epwmss_sysc = {
 	.rev_offs	= 0x0,
 	.sysc_offs	= 0x4,
-	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET,
+	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
+			  SYSC_HAS_RESET_STATUS,
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
 	.sysc_fields	= &omap_hwmod_sysc_type2,
 };

2.20.1

From: Tony Lindgren <[email protected]>

[ Upstream commit e212abd452a4af3174fcd469d46656f83e135a19 ]

We have cases where there are no softreset bits like with am335x lcdc. In that case ti,sysc-mask = <0> needs to be handled properly.

---
 drivers/bus/ti-sysc.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

index e4fe954e63a9b..4ca006e2137f7 100644
@@ -1022,10 +1022,7 @@ static int sysc_init_sysc_mask(struct sysc *ddata)
 	if (error)
 		return 0;
 
-	if (val)
-		ddata->cfg.sysc_val = val & ddata->cap->sysc_mask;
-	else
-		ddata->cfg.sysc_val = ddata->cap->sysc_mask;
+	ddata->cfg.sysc_val = val & ddata->cap->sysc_mask;
 
 	return 0;
 }

2.20.1

From: Ilya Leoshkevich <[email protected]>

[ Upstream commit bb2d267c448f4bc3a3389d97c56391cb779178ae ]

"masking, test in bounds 3" fails on s390, because BPF_ALU64_IMM(BPF_NEG, BPF_REG_2, 0) ignores the top 32 bits of BPF_REG_2. The reason is that JIT emits lcgfr instead of lcgr. The associated comment indicates that the code was intended to emit lcgr in the first place, it's just that the wrong opcode was used.

Fix by using the correct opcode.

---
 arch/s390/net/bpf_jit_comp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index d7052cbe984f8..a3ce1fdc3d802 100644
@@ -841,7 +841,7 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		break;
 	case BPF_ALU64 | BPF_NEG: /* dst = -dst */
 		/* lcgr %dst,%dst */
-		EMIT4(0xb9130000, dst_reg, dst_reg);
+		EMIT4(0xb9030000, dst_reg, dst_reg);
 		break;
 	/*
 	 * BPF_FROM_BE/LE

2.20.1

From: Tony Lindgren <[email protected]>

[ Upstream commit 45da5e09dd32fa98c32eaafe2513db6bd75e2f4f ]

We have errata i688 workaround produce warnings on SoCs other than omap4 and omap5:

omap4_sram_init:Unable to allocate sram needed to handle errata I688 omap4_sram_init:Unable to get sram pool needed to handle errata I688

This is happening because there is no ti,omap4-mpu node, or no SRAM to configure for the other SoCs, so let's remove the warning based on the SoC revision checks.

As nobody has complained it seems that the other SoC variants do not need this workaround.

---
 arch/arm/mach-omap2/omap4-common.c | 3 +++
 1 file changed, 3 insertions(+)

index b226c8aaf8b1c..7074cfd1ff413 100644
@@ -131,6 +131,9 @@ static int __init omap4_sram_init(void)
 	struct device_node *np;
 	struct gen_pool *sram_pool;
 
+	if (!soc_is_omap44xx() && !soc_is_omap54xx())
+		return 0;
+
 	np = of_find_compatible_node(NULL, NULL, "ti,omap4-mpu");
 	if (!np)
 		pr_warn("%s:Unable to allocate sram needed to handle errata I688\n",

2.20.1

From: Faiz Abbas <[email protected]>

[ Upstream commit 07f9a8be66a9bd86f9eaedf8f8aeb416195adab8 ]

According to the latest am572x[1] and dra74x[2] data manuals, mmc3 default, hs, sdr12 and sdr25 modes use iodelay values given in MMC3_MANUAL1. Set the MODE_SELECT bit for these so that manual mode is selected and correct iodelay values can be configured.

[1] http://www.ti.com/lit/ds/symlink/am5728.pdf
[2] http://www.ti.com/lit/ds/symlink/dra746.pdf

---
 arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi | 50 +++++++++++------------
 1 file changed, 25 insertions(+), 25 deletions(-)

index 28ebb4eb884a9..214b9e6de2c35 100644
@@ -32,7 +32,7 @@
  *
  * Datamanual Revisions:
  *
- * AM572x Silicon Revision 2.0: SPRS953B, Revised November 2016
+ * AM572x Silicon Revision 2.0: SPRS953F, Revised May 2019
  * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016
  *
  */

@@ -229,45 +229,45 @@
 
 	mmc3_pins_default: mmc3_pins_default {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 
 	mmc3_pins_hs: mmc3_pins_hs {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 
 	mmc3_pins_sdr12: mmc3_pins_sdr12 {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 
 	mmc3_pins_sdr25: mmc3_pins_sdr25 {
 		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
-			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
-			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
-			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
-			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
-			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
 		>;
 	};
 

2.20.1

From: Janusz Krzysztofik <[email protected]>

[ Upstream commit fa8397e45c64e60c80373bc19ee56e42a6bed9b6 ]

Non-serio path of Amstrad Delta FIQ deferred handler depended on irq_ack() method provided by OMAP GPIO driver. That method has been removed by commit 693de831c6e5 ("gpio: omap: remove irq_ack method"). Remove useless code from the deferred handler and reimplement the missing operation inside the base FIQ handler.

Should another dependency - irq_unmask() - be ever removed from the OMAP GPIO driver, WARN once if missing.

---
 arch/arm/mach-omap1/ams-delta-fiq-handler.S | 3 ++-
 arch/arm/mach-omap1/ams-delta-fiq.c         | 4 +---
 2 files changed, 3 insertions(+), 4 deletions(-)

index ddc27638ba2a5..017c792be0a07 100644
@@ -135,6 +135,8 @@ restart:
 	orr r11, r11, r13			@ mask all requested interrupts
 	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
 
+	str r13, [r12, #OMAP1510_GPIO_INT_STATUS] @ ack all requested interrupts
+
 	ands r10, r13, #KEYBRD_CLK_MASK		@ extract keyboard status - set?
 	beq hksw				@ no - try next source
 

@@ -142,7 +144,6 @@ restart:
 	@@@@@@@@@@@@@@@@@@@@@@
 	@ Keyboard clock FIQ mode interrupt handler
 	@ r10 now contains KEYBRD_CLK_MASK, use it
-	str r10, [r12, #OMAP1510_GPIO_INT_STATUS]	@ ack the interrupt
 	bic r11, r11, r10				@ unmask it
 	str r11, [r12, #OMAP1510_GPIO_INT_MASK]
 

index b0dc7ddf5877d..b8ba763fe1086 100644
@@ -73,9 +73,7 @@ static irqreturn_t deferred_fiq(int irq, void *dev_id)
 			 * interrupts default to since commit 80ac93c27441
 			 * requires interrupt already acked and unmasked.
 			 */
-			if (irq_chip->irq_ack)
-				irq_chip->irq_ack(d);
-			if (irq_chip->irq_unmask)
+			if (!WARN_ON_ONCE(!irq_chip->irq_unmask))
 				irq_chip->irq_unmask(d);
 		}
 		for (; irq_counter[gpio] < fiq_count; irq_counter[gpio]++)

2.20.1

From: Suman Anna <[email protected]>

[ Upstream commit a304f483b6b00d42bde41c45ca52c670945348e2 ]

The clocks are not yet parsed and prepared until after a successful sysc_get_clocks(), so there is no need to unprepare the clocks upon any failure of any of the prior functions in sysc_probe(). The current code path would have been a no-op because of the clock validity checks within sysc_unprepare(), but let's just simplify the cleanup path by returning the error directly.

While at this, also fix the cleanup path for a sysc_init_resets() failure which is executed after the clocks are prepared.

---
 drivers/bus/ti-sysc.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

index 4ca006e2137f7..e95b26319cd91 100644
@@ -1685,7 +1685,7 @@ static int sysc_probe(struct platform_device *pdev)
 
 	error = sysc_init_dts_quirks(ddata);
 	if (error)
-		goto unprepare;
+		return error;
 
 	error = sysc_get_clocks(ddata);
 	if (error)

@@ -1693,27 +1693,27 @@ static int sysc_probe(struct platform_device *pdev)
 
 	error = sysc_map_and_check_registers(ddata);
 	if (error)
-		goto unprepare;
+		return error;
 
 	error = sysc_init_sysc_mask(ddata);
 	if (error)
-		goto unprepare;
+		return error;
 
 	error = sysc_init_idlemodes(ddata);
 	if (error)
-		goto unprepare;
+		return error;
 
 	error = sysc_init_syss_mask(ddata);
 	if (error)
-		goto unprepare;
+		return error;
 
 	error = sysc_init_pdata(ddata);
 	if (error)
-		goto unprepare;
+		return error;
 
 	error = sysc_init_resets(ddata);
 	if (error)
-		return error;
+		goto unprepare;
 
 	pm_runtime_enable(ddata->dev);
 	error = sysc_init_module(ddata);

2.20.1

From: Ilya Leoshkevich <[email protected]>

[ Upstream commit 91b4db5313a2c793aabc2143efb8ed0cf0fdd097 ]

"p runtime/jit: pass > 32bit index to tail_call" fails when bpf_jit_enable=1, because the tail call is not executed.

This in turn is because the generated code assumes index is 64-bit, while it must be 32-bit, and as a result prog array bounds check fails, while it should pass. Even if bounds check would have passed, the code that follows uses 64-bit index to compute prog array offset.

Fix by using clrj instead of clgrj for comparing index with array size, and also by using llgfr for truncating index to 32 bits before using it to compute prog array offset.

---
 arch/s390/net/bpf_jit_comp.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

index a3ce1fdc3d802..2617e426c7926 100644
@@ -1015,8 +1015,8 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		/* llgf %w1,map.max_entries(%b2) */
 		EMIT6_DISP_LH(0xe3000000, 0x0016, REG_W1, REG_0, BPF_REG_2,
 			      offsetof(struct bpf_array, map.max_entries));
-		/* clgrj %b3,%w1,0xa,label0: if %b3 >= %w1 goto out */
-		EMIT6_PCREL_LABEL(0xec000000, 0x0065, BPF_REG_3,
+		/* clrj %b3,%w1,0xa,label0: if (u32)%b3 >= (u32)%w1 goto out */
+		EMIT6_PCREL_LABEL(0xec000000, 0x0077, BPF_REG_3,
 				  REG_W1, 0, 0xa);
 
 		/*

@@ -1042,8 +1042,10 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i
 		 *         goto out;
 		 */
 
-		/* sllg %r1,%b3,3: %r1 = index * 8 */
-		EMIT6_DISP_LH(0xeb000000, 0x000d, REG_1, BPF_REG_3, REG_0, 3);
+		/* llgfr %r1,%b3: %r1 = (u32) index */
+		EMIT4(0xb9160000, REG_1, BPF_REG_3);
+		/* sllg %r1,%r1,3: %r1 *= 8 */
+		EMIT6_DISP_LH(0xeb000000, 0x000d, REG_1, REG_1, REG_0, 3);
 		/* lg %r1,prog(%b2,%r1) */
 		EMIT6_DISP_LH(0xe3000000, 0x0004, REG_1, BPF_REG_2,
 			      REG_1, offsetof(struct bpf_array, ptrs));

2.20.1

From: Ilya Leoshkevich <[email protected]>

[ Upstream commit 27df5c7068bf23cab282dc64b1c9894429b3b8a0 ]

"bind4 allow specific IP & port" and "bind6 deny specific IP & port" fail on s390 because of endianness issue: the 4 IP address bytes are loaded as a word and compared with a constant, but the value of this constant should be different on big- and little- endian machines, which is not the case right now.

Use __bpf_constant_ntohl to generate proper value based on machine endianness.

---
 tools/testing/selftests/bpf/test_sock.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

index b8ebe2f580741..e9567122070a3 100644
@@ -13,6 +13,7 @@
 #include <bpf/bpf.h>
 
 #include "cgroup_helpers.h"
+#include "bpf_endian.h"
 #include "bpf_rlimit.h"
 #include "bpf_util.h"
 

@@ -231,7 +232,8 @@ static struct sock_test tests[] = {
 			/* if (ip == expected && port == expected) */
 			BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_6,
 				    offsetof(struct bpf_sock, src_ip6[3])),
-			BPF_JMP_IMM(BPF_JNE, BPF_REG_7, 0x01000000, 4),
+			BPF_JMP_IMM(BPF_JNE, BPF_REG_7,
+				    __bpf_constant_ntohl(0x00000001), 4),
 			BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_6,
 				    offsetof(struct bpf_sock, src_port)),
 			BPF_JMP_IMM(BPF_JNE, BPF_REG_7, 0x2001, 2),

@@ -260,7 +262,8 @@ static struct sock_test tests[] = {
 			/* if (ip == expected && port == expected) */
 			BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_6,
 				    offsetof(struct bpf_sock, src_ip4)),
-			BPF_JMP_IMM(BPF_JNE, BPF_REG_7, 0x0100007F, 4),
+			BPF_JMP_IMM(BPF_JNE, BPF_REG_7,
+				    __bpf_constant_ntohl(0x7F000001), 4),
 			BPF_LDX_MEM(BPF_W, BPF_REG_7, BPF_REG_6,
 				    offsetof(struct bpf_sock, src_port)),
 			BPF_JMP_IMM(BPF_JNE, BPF_REG_7, 0x1002, 2),

2.20.1

From: Quentin Monnet <[email protected]>

[ Upstream commit d34b044038bfb0e19caa8b019910efc465f41d5f ]

When showing metadata about a single program by invoking "bpftool prog show PROG", the file descriptor referring to the program is not closed before returning from the function. Let's close it.

---
 tools/bpf/bpftool/prog.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index bbba0d61570fe..4f9611af46422 100644
@@ -381,7 +381,9 @@ static int do_show(int argc, char **argv)
 		if (fd < 0)
 			return -1;
 
-		return show_prog(fd);
+		err = show_prog(fd);
+		close(fd);
+		return err;
 	}
 
 	if (argc)

2.20.1

From: Phil Reid <[email protected]>

[ Upstream commit dec43da46f63eb71f519d963ba6832838e4262a3 ]

Currently the driver does not handle EPROBE_DEFER for the confd gpio. Use devm_gpiod_get_optional() instead of devm_gpiod_get() and return error codes from altera_ps_probe().

---
 drivers/fpga/altera-ps-spi.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

index 24b25c6260366..4925cae7dcdde 100644
@@ -207,7 +207,7 @@ static int altera_ps_write_complete(struct fpga_manager *mgr,
 		return -EIO;
 	}
 
-	if (!IS_ERR(conf->confd)) {
+	if (conf->confd) {
 		if (!gpiod_get_raw_value_cansleep(conf->confd)) {
 			dev_err(&mgr->dev, "CONF_DONE is inactive!\n");
 			return -EIO;

@@ -265,10 +265,13 @@ static int altera_ps_probe(struct spi_device *spi)
 		return PTR_ERR(conf->status);
 	}
 
-	conf->confd = devm_gpiod_get(&spi->dev, "confd", GPIOD_IN);
+	conf->confd = devm_gpiod_get_optional(&spi->dev, "confd", GPIOD_IN);
 	if (IS_ERR(conf->confd)) {
-		dev_warn(&spi->dev, "Not using confd gpio: %ld\n",
-			 PTR_ERR(conf->confd));
+		dev_err(&spi->dev, "Failed to get confd gpio: %ld\n",
+			PTR_ERR(conf->confd));
+		return PTR_ERR(conf->confd);
+	} else if (!conf->confd) {
+		dev_warn(&spi->dev, "Not using confd gpio");
 	}
 
 	/* Register manager with unique name */

2.20.1

Hi!

(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Yes it will. I can submit a patch for that if required.

Regards
Phil Reid

From: Todd Seidelmann <[email protected]>

[ Upstream commit f20faa06d83de440bec8e200870784c3458793c4 ]

The ordering of arguments to the x_tables ADD_COUNTER macro appears to be wrong in ebtables (cf. ip_tables.c, ip6_tables.c, and arp_tables.c).

This causes data corruption in the ebtables userspace tools because they get incorrect packet & byte counts from the kernel.

---
 net/bridge/netfilter/ebtables.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

index 62ffc989a44a2..7d249afa1466c 100644
@@ -225,7 +225,7 @@ unsigned int ebt_do_table(struct sk_buff *skb,
 			return NF_DROP;
 		}
 
-		ADD_COUNTER(*(counter_base + i), 1, skb->len);
+		ADD_COUNTER(*(counter_base + i), skb->len, 1);
 
 		/* these should only watch: not modify, nor tell us
 		 * what to do with the packet

@@ -963,8 +963,8 @@ static void get_counters(const struct ebt_counter *oldcounters,
 			continue;
 		counter_base = COUNTER_BASE(oldcounters, nentries, cpu);
 		for (i = 0; i < nentries; i++)
-			ADD_COUNTER(counters[i], counter_base[i].pcnt,
-				    counter_base[i].bcnt);
+			ADD_COUNTER(counters[i], counter_base[i].bcnt,
+				    counter_base[i].pcnt);
 	}
 }
 

@@ -1289,7 +1289,7 @@ static int do_update_counters(struct net *net, const char *name,
 
 	/* we add to the counters of the first cpu */
 	for (i = 0; i < num_counters; i++)
-		ADD_COUNTER(t->private->counters[i], tmp[i].pcnt, tmp[i].bcnt);
+		ADD_COUNTER(t->private->counters[i], tmp[i].bcnt, tmp[i].pcnt);
 
 	write_unlock_bh(&t->lock);
 	ret = 0;

2.20.1

From: Pablo Neira Ayuso <[email protected]>

[ Upstream commit 14c415862c0630e01712a4eeaf6159a2b1b6d2a4 ]

The netlink attribute policy for NFTA_FLOW_TABLE_NAME is missing.

---
 net/netfilter/nft_flow_offload.c | 6 ++++++
 1 file changed, 6 insertions(+)

index 69decbe2c9884..1ef8cb789c41a 100644
@@ -149,6 +149,11 @@ static int nft_flow_offload_validate(const struct nft_ctx *ctx,
 	return nft_chain_validate_hooks(ctx->chain, hook_mask);
 }
 
+static const struct nla_policy nft_flow_offload_policy[NFTA_FLOW_MAX + 1] = {
+	[NFTA_FLOW_TABLE_NAME]	= { .type = NLA_STRING,
+				    .len = NFT_NAME_MAXLEN - 1 },
+};
+
 static int nft_flow_offload_init(const struct nft_ctx *ctx,
 				 const struct nft_expr *expr,
 				 const struct nlattr * const tb[])

@@ -207,6 +212,7 @@ static const struct nft_expr_ops nft_flow_offload_ops = {
 static struct nft_expr_type nft_flow_offload_type __read_mostly = {
 	.name		= "flow_offload",
 	.ops		= &nft_flow_offload_ops,
+	.policy		= nft_flow_offload_policy,
 	.maxattr	= NFTA_FLOW_MAX,
 	.owner		= THIS_MODULE,
 };

2.20.1

From: Juliana Rodrigueiro <[email protected]>

[ Upstream commit 89a26cd4b501e9511d3cd3d22327fc76a75a38b3 ]

When running a 64-bit kernel with a 32-bit iptables binary, the size of the xt_nfacct_match_info struct diverges.

kernel: sizeof(struct xt_nfacct_match_info) : 40
iptables: sizeof(struct xt_nfacct_match_info)) : 36

Trying to append nfacct related rules results in an unhelpful message. Although it is suggested to look for more information in dmesg, nothing can be found there.

    # iptables -A <chain> -m nfacct --nfacct-name <acct-object>
    iptables: Invalid argument. Run `dmesg' for more information.

This patch fixes the memory misalignment by enforcing 8-byte alignment within the struct's first revision. This solution is often used in many other uapi netfilter headers.

---
 include/uapi/linux/netfilter/xt_nfacct.h |  5 ++++
 net/netfilter/xt_nfacct.c                | 36 ++++++++++++++++--------
 2 files changed, 30 insertions(+), 11 deletions(-)

index 5c8a4d760ee34..b5123ab8d54a8 100644
@@ -11,4 +11,9 @@ struct xt_nfacct_match_info {
 	struct nf_acct	*nfacct;
 };
 
+struct xt_nfacct_match_info_v1 {
+	char		name[NFACCT_NAME_MAX];
+	struct nf_acct	*nfacct __attribute__((aligned(8)));
+};
+
 #endif /* _XT_NFACCT_MATCH_H */

index 6b56f4170860c..3241fee9f2a19 100644
@@ -57,25 +57,39 @@ nfacct_mt_destroy(const struct xt_mtdtor_param *par)
 	nfnl_acct_put(info->nfacct);
 }
 
-static struct xt_match nfacct_mt_reg __read_mostly = {
-	.name       = "nfacct",
-	.family     = NFPROTO_UNSPEC,
-	.checkentry = nfacct_mt_checkentry,
-	.match      = nfacct_mt,
-	.destroy    = nfacct_mt_destroy,
-	.matchsize  = sizeof(struct xt_nfacct_match_info),
-	.usersize   = offsetof(struct xt_nfacct_match_info, nfacct),
-	.me         = THIS_MODULE,
+static struct xt_match nfacct_mt_reg[] __read_mostly = {
+	{
+		.name       = "nfacct",
+		.revision   = 0,
+		.family     = NFPROTO_UNSPEC,
+		.checkentry = nfacct_mt_checkentry,
+		.match      = nfacct_mt,
+		.destroy    = nfacct_mt_destroy,
+		.matchsize  = sizeof(struct xt_nfacct_match_info),
+		.usersize   = offsetof(struct xt_nfacct_match_info, nfacct),
+		.me         = THIS_MODULE,
+	},
+	{
+		.name       = "nfacct",
+		.revision   = 1,
+		.family     = NFPROTO_UNSPEC,
+		.checkentry = nfacct_mt_checkentry,
+		.match      = nfacct_mt,
+		.destroy    = nfacct_mt_destroy,
+		.matchsize  = sizeof(struct xt_nfacct_match_info_v1),
+		.usersize   = offsetof(struct xt_nfacct_match_info_v1, nfacct),
+		.me         = THIS_MODULE,
+	},
 };
 
 static int __init nfacct_mt_init(void)
 {
-	return xt_register_match(&nfacct_mt_reg);
+	return xt_register_matches(nfacct_mt_reg, ARRAY_SIZE(nfacct_mt_reg));
 }
 
 static void __exit nfacct_mt_exit(void)
 {
-	xt_unregister_match(&nfacct_mt_reg);
+	xt_unregister_matches(nfacct_mt_reg, ARRAY_SIZE(nfacct_mt_reg));
 }
 
 module_init(nfacct_mt_init);

2.20.1

From: Trond Myklebust <[email protected]>

[ Upstream commit 90cf500e338ab3f3c0f126ba37e36fb6a9058441 ]

Currently, we are translating RPC level errors such as timeouts, as well as interrupts etc into EOPENSTALE, which forces a single replay of the open attempt. What we actually want to do is force the replay only in the cases where the returned error indicates that the file may have changed on the server.

So the fix is to spell out the exact set of errors where we want to return EOPENSTALE.

---
 fs/nfs/nfs4file.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

index 61abbb087ed13..75d3cf86f1723 100644
@@ -73,13 +73,13 @@ nfs4_file_open(struct inode *inode, struct file *filp)
 	if (IS_ERR(inode)) {
 		err = PTR_ERR(inode);
 		switch (err) {
-		case -EPERM:
-		case -EACCES:
-		case -EDQUOT:
-		case -ENOSPC:
-		case -EROFS:
-			goto out_put_ctx;
 		default:
+			goto out_put_ctx;
+		case -ENOENT:
+		case -ESTALE:
+		case -EISDIR:
+		case -ENOTDIR:
+		case -ELOOP:
 			goto out_drop;
 		}
 	}

2.20.1

From: Trond Myklebust <[email protected]>

[ Upstream commit 9821421a291b548ef4369c6998745baa36ddecd5 ]

If the file turns out to be of the wrong type after opening, we want to revalidate the path and retry, so return EOPENSTALE rather than ESTALE.

---
 fs/nfs/dir.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 71b2e390becf2..b8d6860879528 100644
@@ -1486,7 +1486,7 @@ static int nfs_finish_open(struct nfs_open_context *ctx,
 	if (S_ISREG(file->f_path.dentry->d_inode->i_mode))
 		nfs_file_set_open_context(file, ctx);
 	else
-		err = -ESTALE;
+		err = -EOPENSTALE;
 out:
 	return err;
 }

2.20.1

From: Trond Myklebust <[email protected]>

[ Upstream commit 17d8c5d145000070c581f2a8aa01edc7998582ab ]

Initialise the result count to 0 rather than initialising it to the argument count. The reason is that we want to ensure we record the I/O stats correctly in the case where an error is returned (for instance in the layoutstats).

---
 fs/nfs/pagelist.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index d23ea74b5d203..9cf59e2622f8e 100644
@@ -567,7 +567,7 @@ static void nfs_pgio_rpcsetup(struct nfs_pgio_header *hdr,
 	}
 
 	hdr->res.fattr   = &hdr->fattr;
-	hdr->res.count   = count;
+	hdr->res.count   = 0;
 	hdr->res.eof     = 0;
 	hdr->res.verf    = &hdr->verf;
 	nfs_fattr_init(&hdr->fattr);

2.20.1

From: Christophe JAILLET <[email protected]>

[ Upstream commit cd9d4ff9b78fcd0fc4708900ba3e52e71e1a7690 ]

This should be IDT77105, not IDT77015.

---
 drivers/atm/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 2e2efa577437e..8c37294f1d1ee 100644
@@ -200,7 +200,7 @@ config ATM_NICSTAR_USE_SUNI
 	  make the card work).
 
 config ATM_NICSTAR_USE_IDT77105
-	bool "Use IDT77015 PHY driver (25Mbps)"
+	bool "Use IDT77105 PHY driver (25Mbps)"
 	depends on ATM_NICSTAR
 	help
 	  Support for the PHYsical layer chip in ForeRunner LE25 cards. In

2.20.1

From: Ivan Khoronzhuk <[email protected]>

[ Upstream commit fb89c39455e4b49881c5a42761bd71f03d3ef888 ]

Fix mem leak caused by missed unpin routine for umem pages.

---
 net/xdp/xdp_umem.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index a3b037fbfecde..8cab91c482ff5 100644
@@ -322,7 +322,7 @@ static int xdp_umem_reg(struct xdp_umem *umem, struct xdp_umem_reg *mr)
 	umem->pages = kcalloc(umem->npgs, sizeof(*umem->pages), GFP_KERNEL);
 	if (!umem->pages) {
 		err = -ENOMEM;
-		goto out_account;
+		goto out_pin;
 	}
 
 	for (i = 0; i < umem->npgs; i++)

@@ -330,6 +330,8 @@ static int xdp_umem_reg(struct xdp_umem *umem, struct xdp_umem_reg *mr)
 
 	return 0;
 
+out_pin:
+	xdp_umem_unpin_pages(umem);
 out_account:
 	xdp_umem_unaccount_pages(umem);
 	return err;

2.20.1

From: Wenwen Wang <[email protected]>

[ Upstream commit de0e4fd2f07ce3bbdb69dfb8d9426b7227451b69 ]

If qed_mcp_send_drv_version() fails, no cleanup is executed, leading to memory leaks. To fix this issue, introduce the label 'err4' to perform the cleanup work before returning the error.

---
 drivers/net/ethernet/qlogic/qed/qed_main.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index cf3b0e3dc350c..637687b766ff0 100644
@@ -1150,7 +1150,7 @@ static int qed_slowpath_start(struct qed_dev *cdev,
 					      &drv_version);
 		if (rc) {
 			DP_NOTICE(cdev, "Failed sending drv version command\n");
-			return rc;
+			goto err4;
 		}
 	}
 

@@ -1158,6 +1158,8 @@ static int qed_slowpath_start(struct qed_dev *cdev,
 
 	return 0;
 
+err4:
+	qed_ll2_dealloc_if(cdev);
 err3:
 	qed_hw_stop(cdev);
 err2:

2.20.1

From: Doug Berger <[email protected]>

[ Upstream commit c51bc12d06b3a5494fbfcbd788a8e307932a06e9 ]

A timing hazard exists when an early fork/exec thread begins exiting and sets its mm pointer to NULL while a separate core tries to update the section information.

This commit ensures that the mm pointer is not NULL before setting its section parameters. The arguments provided by commit 11ce4b33aedc ("ARM: 8672/1: mm: remove tasklist locking from update_sections_early()") are equally valid for not requiring grabbing the task_lock around this check.

---
 arch/arm/mm/init.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index 0cc8e04295a40..66b1568b95e05 100644
@@ -713,7 +713,8 @@ static void update_sections_early(struct section_perm perms[], int n)
 		if (t->flags & PF_KTHREAD)
 			continue;
 		for_each_thread(t, s)
-			set_section_perms(perms, n, true, s->mm);
+			if (s->mm)
+				set_section_perms(perms, n, true, s->mm);
 	}
 	set_section_perms(perms, n, true, current->active_mm);
 	set_section_perms(perms, n, true, &init_mm);

2.20.1

From: Sven Eckelmann <[email protected]>

[ Upstream commit 0ff0f15a32c093381ad1abc06abe85afb561ab28 ]

Multiple batadv_ogm2_packet can be stored in an skbuff. The functions batadv_v_ogm_send_to_if() uses batadv_v_ogm_aggr_packet() to check if there is another additional batadv_ogm2_packet in the skb or not before they continue processing the packet.

The length for such an OGM2 is BATADV_OGM2_HLEN + batadv_ogm2_packet->tvlv_len. The check must first check that at least BATADV_OGM2_HLEN bytes are available before it accesses tvlv_len (which is part of the header. Otherwise it might try read outside of the currently available skbuff to get the content of tvlv_len.

---
 net/batman-adv/bat_v_ogm.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

index 2948b41b06d47..d241ccc0ca027 100644
@@ -643,17 +643,23 @@ batadv_v_ogm_process_per_outif(struct batadv_priv *bat_priv,
  * batadv_v_ogm_aggr_packet() - checks if there is another OGM aggregated
  * @buff_pos: current position in the skb
  * @packet_len: total length of the skb
- * @tvlv_len: tvlv length of the previously considered OGM
+ * @ogm2_packet: potential OGM2 in buffer
  *
  * Return: true if there is enough space for another OGM, false otherwise.
  */
-static bool batadv_v_ogm_aggr_packet(int buff_pos, int packet_len,
-				     __be16 tvlv_len)
+static bool
+batadv_v_ogm_aggr_packet(int buff_pos, int packet_len,
+			 const struct batadv_ogm2_packet *ogm2_packet)
 {
 	int next_buff_pos = 0;
 
-	next_buff_pos += buff_pos + BATADV_OGM2_HLEN;
-	next_buff_pos += ntohs(tvlv_len);
+	/* check if there is enough space for the header */
+	next_buff_pos += buff_pos + sizeof(*ogm2_packet);
+	if (next_buff_pos > packet_len)
+		return false;
+
+	/* check if there is enough space for the optional TVLV */
+	next_buff_pos += ntohs(ogm2_packet->tvlv_len);
 
 	return (next_buff_pos <= packet_len) &&
 	       (next_buff_pos <= BATADV_MAX_AGGREGATION_BYTES);

@@ -830,7 +836,7 @@ int batadv_v_ogm_packet_recv(struct sk_buff *skb,
 	ogm_packet = (struct batadv_ogm2_packet *)skb->data;
 
 	while (batadv_v_ogm_aggr_packet(ogm_offset, skb_headlen(skb),
-					ogm_packet->tvlv_len)) {
+					ogm_packet)) {
 		batadv_v_ogm_process(skb, ogm_offset, if_incoming);
 
 		ogm_offset += BATADV_OGM2_HLEN;

2.20.1

From: Ilya Leoshkevich <[email protected]>

[ Upstream commit 2c238177bd7f4b14bdf7447cc1cd9bb791f147e6 ]

test_select_reuseport fails on s390 due to verifier rejecting test_select_reuseport_kern.o with the following message:

	; data_check.eth_protocol = reuse_md->eth_protocol;
	18: (69) r1 = *(u16 *)(r6 +22)
	invalid bpf_context access off=22 size=2

This is because on big-endian machines casts from __u32 to __u16 are generated by referencing the respective variable as __u16 with an offset of 2 (as opposed to 0 on little-endian machines).

The verifier already has all the infrastructure in place to allow such accesses, it's just that they are not explicitly enabled for eth_protocol field. Enable them for eth_protocol field by using bpf_ctx_range instead of offsetof.

Ditto for ip_protocol, bind_inany and len, since they already allow narrowing, and the same problem can arise when working with them.

---
 net/core/filter.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

index c996380f29597..e6fa88506c00d 100644
@@ -7234,13 +7234,13 @@ sk_reuseport_is_valid_access(int off, int size,
 		return size == size_default;
 
 	/* Fields that allow narrowing */
-	case offsetof(struct sk_reuseport_md, eth_protocol):
+	case bpf_ctx_range(struct sk_reuseport_md, eth_protocol):
 		if (size < FIELD_SIZEOF(struct sk_buff, protocol))
 			return false;
 		/* fall through */
-	case offsetof(struct sk_reuseport_md, ip_protocol):
-	case offsetof(struct sk_reuseport_md, bind_inany):
-	case offsetof(struct sk_reuseport_md, len):
+	case bpf_ctx_range(struct sk_reuseport_md, ip_protocol):
+	case bpf_ctx_range(struct sk_reuseport_md, bind_inany):
+	case bpf_ctx_range(struct sk_reuseport_md, len):
 		bpf_ctx_record_field_size(info, size_default);
 		return bpf_ctx_narrow_access_ok(off, size, size_default);
 

2.20.1

From: Prashant Malani <[email protected]>

[ Upstream commit f53a7ad189594a112167efaf17ea8d0242b5ac00 ]

get_registers() blindly copies the memory written to by the usb_control_msg() call even if the underlying urb failed.

This could lead to junk register values being read by the driver, since some indirect callers of get_registers() ignore the return values. One example is:
ocp_read_dword() ignores the return value of generic_ocp_read(), which calls get_registers().

So, emulate PCI "Master Abort" behavior by setting the buffer to all 0xFFs when usb_control_msg() fails.

This patch is copied from the r8152 driver (v2.12.0) published by Realtek (www.realtek.com).

---
 drivers/net/usb/r8152.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

index f1b5201cc3207..a065a6184f7e4 100644
@@ -788,8 +788,11 @@ int get_registers(struct r8152 *tp, u16 value, u16 index, u16 size, void *data)
 	ret = usb_control_msg(tp->udev, usb_rcvctrlpipe(tp->udev, 0),
 			      RTL8152_REQ_GET_REGS, RTL8152_REQT_READ,
 			      value, index, tmp, size, 500);
+	if (ret < 0)
+		memset(data, 0xff, size);
+	else
+		memcpy(data, tmp, size);
 
-	memcpy(data, tmp, size);
 	kfree(tmp);
 
 	return ret;

2.20.1

From: Thomas Gleixner <[email protected]>

[ Upstream commit 3e5bedc2c258341702ddffbd7688c5e6eb01eafa ]

Rahul Tanwar reported the following bug on DT systems:

Such systems will very likely not even boot.

For DT enabled machines ioapic_dynirq_base is irrelevant and not updated, so simply map the IRQ base 1:1 instead.

---
 arch/x86/kernel/apic/io_apic.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

index 4077e309e5c4c..ab22eded61d25 100644
@@ -2432,7 +2432,13 @@ unsigned int arch_dynirq_lower_bound(unsigned int from)
 	 * dmar_alloc_hwirq() may be called before setup_IO_APIC(), so use
 	 * gsi_top if ioapic_dynirq_base hasn't been initialized yet.
 	 */
-	return ioapic_initialized ? ioapic_dynirq_base : gsi_top;
+	if (!ioapic_initialized)
+		return gsi_top;
+	/*
+	 * For DT enabled machines ioapic_dynirq_base is irrelevant and not
+	 * updated. So simply return @from if ioapic_dynirq_base == 0.
+	 */
+	return ioapic_dynirq_base ? : from;
 }
 
 #ifdef CONFIG_X86_32

2.20.1

From: Todd Seidelmann <[email protected]>

[ Upstream commit 3cf2f450fff304be9cf4868bf0df17f253bc5b1c ]

Simplify the check in physdev_mt_check() to emit an error message only when passed an invalid chain (ie, NF_INET_LOCAL_OUT). This avoids cluttering up the log with errors against valid rules.

For large/heavily modified rulesets, current behavior can quickly overwhelm the ring buffer, because this function gets called on every change, regardless of the rule that was changed.

---
 net/netfilter/xt_physdev.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

index 05f00fb20b047..cd15ea79e3e2a 100644
@@ -104,11 +104,9 @@ static int physdev_mt_check(const struct xt_mtchk_param *par)
 	if (info->bitmask & (XT_PHYSDEV_OP_OUT | XT_PHYSDEV_OP_ISOUT) &&
 	    (!(info->bitmask & XT_PHYSDEV_OP_BRIDGED) ||
 	     info->invert & XT_PHYSDEV_OP_BRIDGED) &&
-	    par->hook_mask & ((1 << NF_INET_LOCAL_OUT) |
-	    (1 << NF_INET_FORWARD) | (1 << NF_INET_POST_ROUTING))) {
+	    par->hook_mask & (1 << NF_INET_LOCAL_OUT)) {
 		pr_info_ratelimited("--physdev-out and --physdev-is-out only supported in the FORWARD and POSTROUTING chains with bridged traffic\n");
-		if (par->hook_mask & (1 << NF_INET_LOCAL_OUT))
-			return -EINVAL;
+		return -EINVAL;
 	}
 
 	if (!brnf_probed) {

2.20.1

From: Thomas Jarosch <[email protected]>

[ Upstream commit 3a069024d371125227de3ac8fa74223fcf473520 ]

The find_pattern() debug output was printing the 'skip' character. This can be a NULL-byte and messes up further pr_debug() output.

Output without the fix:
kernel: nf_conntrack_ftp: Pattern matches!
kernel: nf_conntrack_ftp: Skipped up to <7>nf_conntrack_ftp: find_pattern PORT': dlen = 8
kernel: nf_conntrack_ftp: find_pattern `EPRT': dlen = 8

Output with the fix:
kernel: nf_conntrack_ftp: Pattern matches!
kernel: nf_conntrack_ftp: Skipped up to 0x0 delimiter!
kernel: nf_conntrack_ftp: Match succeeded!
kernel: nf_conntrack_ftp: conntrack_ftp: match `172,17,0,100,200,207' (20 bytes at 4150681645)
kernel: nf_conntrack_ftp: find_pattern `PORT': dlen = 8

---
 net/netfilter/nf_conntrack_ftp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index a11c304fb7713..efc14c7b4f8ef 100644
@@ -323,7 +323,7 @@ static int find_pattern(const char *data, size_t dlen,
 		i++;
 	}
 
-	pr_debug("Skipped up to `%c'!\n", skip);
+	pr_debug("Skipped up to 0x%hhx delimiter!\n", skip);
 
 	*numoff = i;
 	*numlen = getnum(data + i, dlen - i, cmd, term, numoff);

2.20.1

From: Trond Myklebust <[email protected]>

[ Upstream commit 71affe9be45a5c60b9772e1b2701710712637274 ]

If we received a reply from the server with a zero length read and no error, then that implies we are at eof.

---
 fs/nfs/proc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index e0c257bd62b93..89fa9c706b380 100644
@@ -594,7 +594,8 @@ static int nfs_read_done(struct rpc_task *task, struct nfs_pgio_header *hdr)
 		/* Emulate the eof flag, which isn't normally needed in NFSv2
 		 * as it is guaranteed to always return the file attributes
 		 */
-		if (hdr->args.offset + hdr->res.count >= hdr->res.fattr->size)
+		if ((hdr->res.count == 0 && hdr->args.count > 0) ||
+		    hdr->args.offset + hdr->res.count >= hdr->res.fattr->size)
 			hdr->res.eof = 1;
 	}
 	return 0;

2.20.1

From: Trond Myklebust <[email protected]>

[ Upstream commit d33d4beb522987d1c305c12500796f9be3687dee ]

Ensure we update the write result count on success, since the RPC call itself does not do so.

---
 fs/nfs/proc.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

index 89fa9c706b380..0e0335e77ce68 100644
@@ -616,8 +616,10 @@ static int nfs_proc_pgio_rpc_prepare(struct rpc_task *task,
 
 static int nfs_write_done(struct rpc_task *task, struct nfs_pgio_header *hdr)
 {
-	if (task->tk_status >= 0)
+	if (task->tk_status >= 0) {
+		hdr->res.count = hdr->args.count;
 		nfs_writeback_update_inode(hdr);
+	}
 	return 0;
 }
 

2.20.1

From: Marc Zyngier <[email protected]>

[ Upstream commit 2a1a3fa0f29270583f0e6e3100d609e09697add1 ]

An arm64 kernel configured with

CONFIG_KPROBES=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y

reports the following kprobe failure:

  [    0.032677] kprobes: failed to populate blacklist: -22
  [    0.033376] Please take care of using kprobes.

It appears that kprobe fails to retrieve the symbol at address 0xffff000010081000, despite this symbol being in System.map:

ffff000010081000 T __exception_text_start

This symbol is part of the first group of aliases in the kallsyms_offsets array (symbol names generated using ugly hacks in scripts/kallsyms.c):

kallsyms_offsets:

          .long   0x1000 // do_undefinstr
          .long   0x1000 // efi_header_end
          .long   0x1000 // _stext
          .long   0x1000 // __exception_text_start
          .long   0x12b0 // do_cp15instr

Looking at the implementation of get_symbol_pos(), it returns the lowest index for aliasing symbols. In this case, it return 0.

But kallsyms_lookup_size_offset() considers 0 as a failure, which is obviously wrong (there is definitely a valid symbol living there). In turn, the kprobe blacklisting stops abruptly, hence the original error.

A CONFIG_KALLSYMS_ALL kernel wouldn't fail as there is always some random symbols at the beginning of this array, which are never looked up via kallsyms_lookup_size_offset.

Fix it by considering that get_symbol_pos() is always successful (which is consistent with the other uses of this function).

---
 kernel/kallsyms.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

index 02a0b01380d8e..ed87dac8378cc 100644
@@ -262,8 +262,10 @@ int kallsyms_lookup_size_offset(unsigned long addr, unsigned long *symbolsize,
 {
 	char namebuf[KSYM_NAME_LEN];
 
-	if (is_ksym_addr(addr))
-		return !!get_symbol_pos(addr, symbolsize, offset);
+	if (is_ksym_addr(addr)) {
+		get_symbol_pos(addr, symbolsize, offset);
+		return 1;
+	}
 	return !!module_address_lookup(addr, symbolsize, offset, NULL, namebuf) ||
 	       !!__bpf_address_lookup(addr, symbolsize, offset, namebuf);
 }

2.20.1

From: Ronnie Sahlberg <[email protected]>

[ Upstream commit f2aee329a68f5a907bcff11a109dfe17c0b41aeb ]

RHBZ: 1710429

When we use a domain-key to authenticate using multiuser we must also set the domainnmame for the new volume as it will be used and passed to the server in the NTLMSSP Domain-name.

---
 fs/cifs/connect.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

index 208430bb66fc6..75727518b272a 100644
@@ -2756,6 +2756,7 @@ static int
 cifs_set_cifscreds(struct smb_vol *vol, struct cifs_ses *ses)
 {
 	int rc = 0;
+	int is_domain = 0;
 	const char *delim, *payload;
 	char *desc;
 	ssize_t len;

@@ -2803,6 +2804,7 @@ cifs_set_cifscreds(struct smb_vol *vol, struct cifs_ses *ses)
 			rc = PTR_ERR(key);
 			goto out_err;
 		}
+		is_domain = 1;
 	}
 
 	down_read(&key->sem);

@@ -2860,6 +2862,26 @@ cifs_set_cifscreds(struct smb_vol *vol, struct cifs_ses *ses)
 		goto out_key_put;
 	}
 
+	/*
+	 * If we have a domain key then we must set the domainName in the
+	 * for the request.
+	 */
+	if (is_domain && ses->domainName) {
+		vol->domainname = kstrndup(ses->domainName,
+					   strlen(ses->domainName),
+					   GFP_KERNEL);
+		if (!vol->domainname) {
+			cifs_dbg(FYI, "Unable to allocate %zd bytes for "
+				 "domain\n", len);
+			rc = -ENOMEM;
+			kfree(vol->username);
+			vol->username = NULL;
+			kfree(vol->password);
+			vol->password = NULL;
+			goto out_key_put;
+		}
+	}
+
 out_key_put:
 	up_read(&key->sem);
 	key_put(key);

2.20.1

From: Dan Carpenter <[email protected]>

[ Upstream commit 478228e57f81f6cb60798d54fc02a74ea7dd267e ]

It's safer to zero out the password so that it can never be disclosed.

---
 fs/cifs/connect.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 75727518b272a..c290e231f9188 100644
@@ -2876,7 +2876,7 @@ cifs_set_cifscreds(struct smb_vol *vol, struct cifs_ses *ses)
 			rc = -ENOMEM;
 			kfree(vol->username);
 			vol->username = NULL;
-			kfree(vol->password);
+			kzfree(vol->password);
 			vol->password = NULL;
 			goto out_key_put;
 		}

2.20.1

From: Nagarjuna Kristam <[email protected]>

[ Upstream commit 993cc8753453fccfe060a535bbe21fcf1001b626 ]

The Falcon microcontroller that runs the XUSB firmware and which is responsible for exposing the XHCI interface can address only 40 bits of memory. Typically that's not a problem because Tegra devices don't have enough system memory to exceed those 40 bits.

However, if the ARM SMMU is enable on Tegra186 and later, the addresses passed to the XUSB controller can be anywhere in the 48-bit IOV address space of the ARM SMMU. Since the DMA/IOMMU API starts allocating from the top of the IOVA space, the Falcon microcontroller is not able to load the firmware successfully.

Fix this by setting the DMA mask to 40 bits, which will force the DMA API to map the buffer for the firmware to an IOVA that is addressable by the Falcon.

---
 drivers/usb/host/xhci-tegra.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

index b1cce989bd123..fe37dacc695fc 100644
@@ -1148,6 +1148,16 @@ static int tegra_xusb_probe(struct platform_device *pdev)
 
 	tegra_xusb_ipfs_config(tegra, regs);
 
+	/*
+	 * The XUSB Falcon microcontroller can only address 40 bits, so set
+	 * the DMA mask accordingly.
+	 */
+	err = dma_set_mask_and_coherent(tegra->dev, DMA_BIT_MASK(40));
+	if (err < 0) {
+		dev_err(&pdev->dev, "failed to set DMA mask: %d\n", err);
+		goto put_rpm;
+	}
+
 	err = tegra_xusb_load_firmware(tegra);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to load firmware: %d\n", err);

2.20.1

From: zhaoyang <[email protected]>

[ Upstream commit 5b3efa4f1479c91cb8361acef55f9c6662feba57 ]

pfn_valid can be wrong when parsing a invalid pfn whose phys address exceeds BITS_PER_LONG as the MSB will be trimed when shifted.

The issue originally arise from bellowing call stack, which corresponding to an access of the /proc/kpageflags from userspace with a invalid pfn parameter and leads to kernel panic.

[46886.723249] c7 [<c031ff98>] (stable_page_flags) from [<c03203f8>]
[46886.723264] c7 [<c0320368>] (kpageflags_read) from [<c0312030>]
[46886.723280] c7 [<c0311fb0>] (proc_reg_read) from [<c02a6e6c>]
[46886.723290] c7 [<c02a6e24>] (__vfs_read) from [<c02a7018>]
[46886.723301] c7 [<c02a6f74>] (vfs_read) from [<c02a778c>]
[46886.723315] c7 [<c02a770c>] (SyS_pread64) from [<c0108620>]

(ret_fast_syscall+0x0/0x28)

---
 arch/arm/mm/init.c | 5 +++++
 1 file changed, 5 insertions(+)

index 66b1568b95e05..e1d330a269212 100644
@@ -196,6 +196,11 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max_low,
 #ifdef CONFIG_HAVE_ARCH_PFN_VALID
 int pfn_valid(unsigned long pfn)
 {
+	phys_addr_t addr = __pfn_to_phys(pfn);
+
+	if (__phys_to_pfn(addr) != pfn)
+		return 0;
+
 	return memblock_is_map_memory(__pfn_to_phys(pfn));
 }
 EXPORT_SYMBOL(pfn_valid);

2.20.1

From: Thomas Falcon <[email protected]>

[ Upstream commit 36f1031c51a2538e5558fb44c6d6b88f98d3c0f2 ]

Currently, the ibmvnic driver will not schedule device resets if the device is being removed, but does not check the device state before the reset is actually processed. This leads to a race where a reset is scheduled with a valid device state but is processed after the driver has been removed, resulting in an oops.

Fix this by checking the device state before processing a queued reset event.

---
 drivers/net/ethernet/ibm/ibmvnic.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

index 255de7d68cd33..5a57be66a4872 100644
@@ -1998,6 +1998,10 @@ static void __ibmvnic_reset(struct work_struct *work)
 
 	rwi = get_next_rwi(adapter);
 	while (rwi) {
+		if (adapter->state == VNIC_REMOVING ||
+		    adapter->state == VNIC_REMOVED)
+			goto out;
+
 		if (adapter->force_reset_recovery) {
 			adapter->force_reset_recovery = false;
 			rc = do_hard_reset(adapter, rwi, reset_state);

@@ -2022,7 +2026,7 @@ static void __ibmvnic_reset(struct work_struct *work)
 		netdev_dbg(adapter->netdev, "Reset failed\n");
 		free_all_rwi(adapter);
 	}
-
+out:
 	adapter->resetting = false;
 	if (we_lock_rtnl)
 		rtnl_unlock();

2.20.1

From: Takashi Iwai <[email protected]>

[ Upstream commit 189308d5823a089b56e2299cd96589507dac7319 ]

A similar workaround for the suspend/resume problem is needed for yet another ASUS machines, P6X models. Like the previous fix, the BIOS doesn't provide the standard DMI_SYS_* entry, so again DMI_BOARD_* entries are used instead.

---
 drivers/net/ethernet/marvell/sky2.c | 7 +++++++
 1 file changed, 7 insertions(+)

index 4ade864c8d531..d013f30019b69 100644
@@ -4954,6 +4954,13 @@ static const struct dmi_system_id msi_blacklist[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "P6T"),
 		},
 	},
+	{
+		.ident = "ASUS P6X",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "P6X"),
+		},
+	},
 	{}
 };
 

2.20.1

From: Jarkko Nikula <[email protected]>

[ Upstream commit c486dcd2f1bbdd524a1e0149734b79e4ae329650 ]

Make sure interrupt handler i2c_dw_irq_handler_slave() has finished before clearing the the dev->slave pointer in i2c_dw_unreg_slave().

There is possibility for a race if i2c_dw_irq_handler_slave() is running on another CPU while clearing the dev->slave pointer.

---
 drivers/i2c/busses/i2c-designware-slave.c | 1 +
 1 file changed, 1 insertion(+)

index e7f9305b2dd9f..f5f001738df5e 100644
@@ -94,6 +94,7 @@ static int i2c_dw_unreg_slave(struct i2c_client *slave)
 
 	dev->disable_int(dev);
 	dev->disable(dev);
+	synchronize_irq(dev->irq);
 	dev->slave = NULL;
 	pm_runtime_put(dev->dev);
 

2.20.1

From: Josh Hunt <[email protected]>

[ Upstream commit 44d3bbb6f5e501b873218142fe08cdf62a4ac1f3 ]

We see our Nehalem machines reporting 'perfevents: irq loop stuck!' in some cases when using perf:

perfevents: irq loop stuck!

WARNING: CPU: 0 PID: 3485 at arch/x86/events/intel/core.c:2282 intel_pmu_handle_irq+0x37b/0x530
...
RIP: 0010:intel_pmu_handle_irq+0x37b/0x530
...
Call Trace:
<NMI>
? perf_event_nmi_handler+0x2e/0x50
? intel_pmu_save_and_restart+0x50/0x50
perf_event_nmi_handler+0x2e/0x50
nmi_handle+0x6e/0x120
default_do_nmi+0x3e/0x100
do_nmi+0x102/0x160
end_repeat_nmi+0x16/0x50
...
? native_write_msr+0x6/0x20
? native_write_msr+0x6/0x20
</NMI>
intel_pmu_enable_event+0x1ce/0x1f0
x86_pmu_start+0x78/0xa0
x86_pmu_enable+0x252/0x310
__perf_event_task_sched_in+0x181/0x190
? __switch_to_asm+0x41/0x70
? __switch_to_asm+0x35/0x70
? __switch_to_asm+0x41/0x70
? __switch_to_asm+0x35/0x70
finish_task_switch+0x158/0x260
__schedule+0x2f6/0x840
? hrtimer_start_range_ns+0x153/0x210
schedule+0x32/0x80
schedule_hrtimeout_range_clock+0x8a/0x100
? hrtimer_init+0x120/0x120
ep_poll+0x2f7/0x3a0
? wake_up_q+0x60/0x60
do_epoll_wait+0xa9/0xc0
__x64_sys_epoll_wait+0x1a/0x20
do_syscall_64+0x4e/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fdeb1e96c03

...

---
 arch/x86/events/intel/core.c | 6 ++++++
 1 file changed, 6 insertions(+)

index db5a2ba617536..2dd8b0d64295a 100644
@@ -3319,6 +3319,11 @@ static u64 bdw_limit_period(struct perf_event *event, u64 left)
 	return left;
 }
 
+static u64 nhm_limit_period(struct perf_event *event, u64 left)
+{
+	return max(left, 32ULL);
+}
+
 PMU_FORMAT_ATTR(event,	"config:0-7"	);
 PMU_FORMAT_ATTR(umask,	"config:8-15"	);
 PMU_FORMAT_ATTR(edge,	"config:18"	);

@@ -4115,6 +4120,7 @@ __init int intel_pmu_init(void)
 		x86_pmu.pebs_constraints = intel_nehalem_pebs_event_constraints;
 		x86_pmu.enable_all = intel_pmu_nhm_enable_all;
 		x86_pmu.extra_regs = intel_nehalem_extra_regs;
+		x86_pmu.limit_period = nhm_limit_period;
 
 		x86_pmu.cpu_events = nhm_events_attrs;
 

2.20.1

From: Kim Phillips <[email protected]>

[ Upstream commit 0f4cd769c410e2285a4e9873a684d90423f03090 ]

When counting dispatched micro-ops with cnt_ctl=1, in order to prevent sample bias, IBS hardware preloads the least significant 7 bits of current count (IbsOpCurCnt) with random values, such that, after the interrupt is handled and counting resumes, the next sample taken will be slightly perturbed.

The current count bitfield is in the IBS execution control h/w register, alongside the maximum count field.

Currently, the IBS driver writes that register with the maximum count, leaving zeroes to fill the current count field, thereby overwriting the random bits the hardware preloaded for itself.

Fix the driver to actually retain and carry those random bits from the read of the IBS control register, through to its write, instead of overwriting the lower current count bits with zeroes.

Tested with:

perf record -c 100001 -e ibs_op/cnt_ctl=1/pp -a -C 0 taskset -c 0 <workload>

'perf annotate' output before:

 15.70  65:   addsd     %xmm0,%xmm1
 17.30        add       $0x1,%rax
 15.88        cmp       %rdx,%rax
              je        82
 17.32  72:   test      $0x1,%al
              jne       7c
  7.52        movapd    %xmm1,%xmm0
  5.90        jmp       65
  8.23  7c:   sqrtsd    %xmm1,%xmm0
 12.15        jmp       65

'perf annotate' output after:

 16.63  65:   addsd     %xmm0,%xmm1
 16.82        add       $0x1,%rax
 16.81        cmp       %rdx,%rax
              je        82
 16.69  72:   test      $0x1,%al
              jne       7c
  8.30        movapd    %xmm1,%xmm0
  8.13        jmp       65
  8.24  7c:   sqrtsd    %xmm1,%xmm0
  8.39        jmp       65

Tested on Family 15h and 17h machines.

Machines prior to family 10h Rev. C don't have the RDWROPCNT capability, and have the IbsOpCurCnt bitfield reserved, so this patch shouldn't affect their operation.

It is unknown why commit db98c5faf8cb ("perf/x86: Implement 64-bit counter support for IBS") ignored the lower 4 bits of the IbsOpCurCnt field; the number of preloaded random bits has always been 7, AFAICT.

---
 arch/x86/events/amd/ibs.c         | 13 ++++++++++---
 arch/x86/include/asm/perf_event.h | 12 ++++++++----
 2 files changed, 18 insertions(+), 7 deletions(-)

index d50bb4dc06503..80c6d84cad67b 100644
@@ -672,10 +672,17 @@ fail:
 
 	throttle = perf_event_overflow(event, &data, &regs);
 out:
-	if (throttle)
+	if (throttle) {
 		perf_ibs_stop(event, 0);
-	else
-		perf_ibs_enable_event(perf_ibs, hwc, period >> 4);
+	} else {
+		period >>= 4;
+
+		if ((ibs_caps & IBS_CAPS_RDWROPCNT) &&
+		    (*config & IBS_OP_CNT_CTL))
+			period |= *config & IBS_OP_CUR_CNT_RAND;
+
+		perf_ibs_enable_event(perf_ibs, hwc, period);
+	}
 
 	perf_event_update_userpage(event);
 

index 78241b736f2a0..f6c4915a863e0 100644
@@ -209,16 +209,20 @@ struct x86_pmu_capability {
 #define IBSCTL_LVT_OFFSET_VALID		(1ULL<<8)
 #define IBSCTL_LVT_OFFSET_MASK		0x0F
 
-/* ibs fetch bits/masks */
+/* IBS fetch bits/masks */
 #define IBS_FETCH_RAND_EN	(1ULL<<57)
 #define IBS_FETCH_VAL		(1ULL<<49)
 #define IBS_FETCH_ENABLE	(1ULL<<48)
 #define IBS_FETCH_CNT		0xFFFF0000ULL
 #define IBS_FETCH_MAX_CNT	0x0000FFFFULL
 
-/* ibs op bits/masks */
-/* lower 4 bits of the current count are ignored: */
-#define IBS_OP_CUR_CNT		(0xFFFF0ULL<<32)
+/*
+ * IBS op bits/masks
+ * The lower 7 bits of the current count are random bits
+ * preloaded by hardware and ignored in software
+ */
+#define IBS_OP_CUR_CNT		(0xFFF80ULL<<32)
+#define IBS_OP_CUR_CNT_RAND	(0x0007FULL<<32)
 #define IBS_OP_CNT_CTL		(1ULL<<19)
 #define IBS_OP_VAL		(1ULL<<18)
 #define IBS_OP_ENABLE		(1ULL<<17)

2.20.1

From: YueHaibing <[email protected]>

[ Upstream commit b6b4dc4c1fa7f1c99398e7dc85758049645e9588 ]

In xgbe_mod_init(), we should do cleanup if some error occurs

---
 drivers/net/ethernet/amd/xgbe/xgbe-main.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

index b41f23679a087..7ce9c69e9c44f 100644
@@ -469,13 +469,19 @@ static int __init xgbe_mod_init(void)
 
 	ret = xgbe_platform_init();
 	if (ret)
-		return ret;
+		goto err_platform_init;
 
 	ret = xgbe_pci_init();
 	if (ret)
-		return ret;
+		goto err_pci_init;
 
 	return 0;
+
+err_pci_init:
+	xgbe_platform_exit();
+err_platform_init:
+	unregister_netdevice_notifier(&xgbe_netdev_notifier);
+	return ret;
 }
 
 static void __exit xgbe_mod_exit(void)

2.20.1

From: Ben Hutchings <[email protected]>

[ Upstream commit adb8049097a9ec4acd09fbd3aa8636199a78df8a ]

x86_energy_perf_policy first uses __get_cpuid() to check the maximum CPUID level and exits if it is too low. It then assumes that later calls will succeed (which I think is architecturally guaranteed). It also assumes that CPUID works at all (which is not guaranteed on x86_32).

If optimisations are enabled, gcc warns about potentially uninitialized variables. Fix this by adding an exit-on-error after every call to __get_cpuid() instead of just checking the maximum level.

---
 .../x86_energy_perf_policy.c                  | 26 +++++++++++--------
 1 file changed, 15 insertions(+), 11 deletions(-)

index 65bbe627a425f..bbef8bcf44d6d 100644
@@ -1260,6 +1260,15 @@ void probe_dev_msr(void)
 		if (system("/sbin/modprobe msr > /dev/null 2>&1"))
 			err(-5, "no /dev/cpu/0/msr, Try \"# modprobe msr\" ");
 }
+
+static void get_cpuid_or_exit(unsigned int leaf,
+			     unsigned int *eax, unsigned int *ebx,
+			     unsigned int *ecx, unsigned int *edx)
+{
+	if (!__get_cpuid(leaf, eax, ebx, ecx, edx))
+		errx(1, "Processor not supported\n");
+}
+
 /*
  * early_cpuid()
  * initialize turbo_is_enabled, has_hwp, has_epb