.travis.yml: Test the release tarball
PATCH 1/1 .travis.yml: Test the release tarball
Add a job to generate the release tarball and build/install few QEMU targets from it.
Ideally we should build the 'efi' target from the 'roms' directory, but it is too time consuming.
This job is only triggered when a tag starting with 'v' is pushed, which is the case with release candidate tags.
---
This job is quick enough: Ran for 15 min 32 sec
https://travis-ci.org/philmd/qemu/jobs/587583631
Based-on: <[email protected]> "Fix tarball builds of UEFI/EDK2 firmware"
https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg02734.html
--- .travis.yml | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
.travis.yml +22 -0
@@ -339,3 +339,25 @@ matrix: - CONFIG="--target-list=xtensa-softmmu,arm-softmmu,aarch64-softmmu,alpha-softmmu" - TEST_CMD="make -j3 check-tcg V=1" - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default" + + + # Release builds + # The make-release script expect a QEMU version, so our tag must start with a 'v' + - if: tag IS present AND tag =~ ^v + env: + # We want to build from the release tarball + - BUILD_DIR="release/build/dir" SRC_DIR="../../.." + - BASE_CONFIG="--prefix=$PWD/dist" + - CONFIG="--target-list=x86_64-softmmu,aarch64-softmmu,armeb-linux-user,ppc-linux-user" + - TEST_CMD="make install -j3" + - QEMU_VERSION="${TRAVIS_TAG:1}" + - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default" + before_script: + - command -v ccache && ccache --zero-stats + - mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR} + script: + - ${SRC_DIR}/scripts/make-release ${SRC_DIR} ${QEMU_VERSION} + - ls -l qemu-${QEMU_VERSION}.tar.bz2 + - tar -xf qemu-${QEMU_VERSION}.tar.bz2 && cd qemu-${QEMU_VERSION} + - ./configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; } + - make install
Signature · 1 line
2.20.1
Quoted 26 lines · Philippe Mathieu-Daudé
Add a job to generate the release tarball and build/install few QEMU targets from it.
Ideally we should build the 'efi' target from the 'roms' directory, but it is too time consuming.
This job is only triggered when a tag starting with 'v' is pushed, which is the case with release candidate tags.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>---
This job is quick enough: Ran for 15 min 32 sec
https://travis-ci.org/philmd/qemu/jobs/587583631Based-on: <[email protected]> "Fix tarball builds of UEFI/EDK2 firmware"
https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg02734.html--- .travis.yml | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+).travis.yml +0
-0
.travis.yml matrix: · line 345
Quoted 7 lines
.travis.yml +4
-0@@ -339,3 +339,25 @@ matrix: - CONFIG="--target-list=xtensa-softmmu,arm-softmmu,aarch64-softmmu,alpha-softmmu" - TEST_CMD="make -j3 check-tcg V=1" - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default" + + + # Release builds + # The make-release script expect a QEMU version, so our tag must start with a 'v'
*sigh* I forgot to commit my stash.
This is simply a change in the comment:
-- >8 --
@@ -342,7 +342,8 @@
# Release builds
- # The make-release script expect a QEMU version, so our tag must
start with a 'v'
+ # The make-release script expect a QEMU version, so our tag must
start with a 'v'.
+ # This is the case when release candidate tags are created.
---
Quoted 19 lines
.travis.yml +18
-0+ - if: tag IS present AND tag =~ ^v + env: + # We want to build from the release tarball + - BUILD_DIR="release/build/dir" SRC_DIR="../../.." + - BASE_CONFIG="--prefix=$PWD/dist" + - CONFIG="--target-list=x86_64-softmmu,aarch64-softmmu,armeb-linux-user,ppc-linux-user" + - TEST_CMD="make install -j3" + - QEMU_VERSION="${TRAVIS_TAG:1}" + - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default" + before_script: + - command -v ccache && ccache --zero-stats + - mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR} + script: + - ${SRC_DIR}/scripts/make-release ${SRC_DIR} ${QEMU_VERSION} + - ls -l qemu-${QEMU_VERSION}.tar.bz2 + - tar -xf qemu-${QEMU_VERSION}.tar.bz2 && cd qemu-${QEMU_VERSION} + - ./configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; } + - make install
Quoting Philippe Mathieu-Daudé (2019-09-20 12:42:19)
Quoted 5 lines
Add a job to generate the release tarball and build/install few QEMU targets from it.
Ideally we should build the 'efi' target from the 'roms' directory, but it is too time consuming.
Individual targets might not be too bad. For instance:
make -f Makefile.edk2 ../pc-bios/edk2-x86_64-secure-code.fd.bz2
builds in about 7m on my 2-core laptop, but the invocation is sort of hacky. Probably makes sense to expose via make efi-<arch> targets before adding such a test.
Cases covered here seem like a good starting point. Just some minor comments below.
Quoted 21 lines
This job is only triggered when a tag starting with 'v' is pushed, which is the case with release candidate tags.
Signed-off-by Philippe Mathieu-Daudé <[email protected]>---
This job is quick enough: Ran for 15 min 32 sec
https://travis-ci.org/philmd/qemu/jobs/587583631Based-on: <[email protected]> "Fix tarball builds of UEFI/EDK2 firmware"
https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg02734.html--- .travis.yml | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+).travis.yml +0
-0
.travis.yml matrix: · line 346
Quoted 8 lines
.travis.yml +5
-0@@ -339,3 +339,25 @@ matrix: - CONFIG="--target-list=xtensa-softmmu,arm-softmmu,aarch64-softmmu,alpha-softmmu" - TEST_CMD="make -j3 check-tcg V=1" - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default" + + + # Release builds + # The make-release script expect a QEMU version, so our tag must start with a 'v' + - if: tag IS present AND tag =~ ^v
Might ^v be a bit too open-ended? Perhaps ^v\d+\. or something of the sort?
.travis.yml matrix: · line 359
Quoted 13 lines
.travis.yml +13
-0+ env: + # We want to build from the release tarball + - BUILD_DIR="release/build/dir" SRC_DIR="../../.." + - BASE_CONFIG="--prefix=$PWD/dist" + - CONFIG="--target-list=x86_64-softmmu,aarch64-softmmu,armeb-linux-user,ppc-linux-user" + - TEST_CMD="make install -j3" + - QEMU_VERSION="${TRAVIS_TAG:1}" + - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default" + before_script: + - command -v ccache && ccache --zero-stats + - mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR} + script: + - ${SRC_DIR}/scripts/make-release ${SRC_DIR} ${QEMU_VERSION}
Same result currently, but the make qemu-$version.tar.bz2 target is probably more robust/stable to test with.
Quoted 7 lines
.travis.yml +4
-0+ - ls -l qemu-${QEMU_VERSION}.tar.bz2 + - tar -xf qemu-${QEMU_VERSION}.tar.bz2 && cd qemu-${QEMU_VERSION} + - ./configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; } + - make installSignature · 1 line
2.20.1