Make pcm_ioplug check lock status before locking (fixes pcm_jack lockups)
cover Make pcm_ioplug check lock status before locking (fixes pcm_jack lockups)
This is my first time contributing a patch to a mailing list. If I've made a mess, please let me know so I can learn how to avoid it in future.
The purpose of this patchset is to fix a specific common lockup in the pcm_jack plugin (from alsa-plugins). I'm not sure if this is the right approach to take, but at the very least it should make the pcm_ioplug code a bit more resilient.
The problem is this: When using the pcm_jack plugin, if a program attempts to play audio using the SND_PCM_FORMAT_FLOAT format, said program locks up.
This should be enough to reproduce the bug:
pcm.rawjack {
type jack
playback_ports {
0 system:playback_1
1 system:playback_2
}
capture_ports {
0 system:capture_1
1 system:capture_2
}
}
pcm.!default {
type plug
slave.pcm "rawjack"
}What's happening is that several snd_pcm_ioplug_* functions assume that the pcm mutex is locked already. It then proceeds to unlock the mutex, call a function, and then relock the mutex. When the mutex isn't locked already, the initial unlock results in a silently ignored pthread error, and the lock results in the program eventually deadlocking as it doesn't expect the mutex to be held at that point.
Patch 2 modifies pcm_ioplug to check if the mutex is held before doing the unlock-act-lock sequence, and if the mutex is not held then it skips the unlock and lock stages. This depends on Patch 1, which adds a snd_pcm_is_locked function to give the state of the mutex.
Patch 3 is completely optional. It adds assertions which make sure that all uses of snd_pcm_lock/snd_pcm_unlock are correct. On one hand this will likely result in crashes in some of the less refined parts of the code. On the other hand, when that happens, you'll know which parts need a bit more love. I know it was useful for finding this issue in the first place.
These patches fix the problems I am having, but if you have a more suitable approach to fixing this problem then please let me know.
Regards,
Ben R
Ben Russell (3):
pcm_local: Add snd_pcm_is_locked
pcm_ioplug: Don't unlock+lock if we're not locked
pcm_local: assert() when using mutexes incorrectly
src/pcm/pcm_ioplug.c | 50 +++++++++++++++++++++++----------- src/pcm/pcm_local.h | 64 ++++++++++++++++++++++++++++++++++++++------ 2 files changed, 91 insertions(+), 23 deletions(-)
Signature · 6 lines
2.23.0 _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
PATCH 1/3 pcm_local: Add snd_pcm_is_locked
This is needed in preparation for a fix to be applied to pcm_ioplug which will be in a following commit.
--- src/pcm/pcm_local.h | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)
src/pcm/pcm_local.h +32 -0
@@ -1171,9 +1171,41 @@ static inline void snd_pcm_unlock(snd_pcm_t *pcm)if (pcm->lock_enabled && pcm->need_lock) pthread_mutex_unlock(&pcm->lock); } + +/* +* snd_pcm_is_locked() is used to determine if the lock is currently held. +* It is mostly provided as a workaround for pcm_ioplug, which otherwise would +* for some functions assume that the plugin is locked even when it isn't. +* +* If $LIBASOUND_THREAD_SAFE=0 is set then this always returns 0 as there +* is no mutex in that case. +*/ +static inline int snd_pcm_is_locked (snd_pcm_t *pcm) +{ +int trylock_result; +int unlock_result; + +if (pcm->lock_enabled) { + trylock_result =pthread_mutex_trylock (&pcm->lock); +assert (trylock_result ==0 || trylock_result ==EBUSY ); +if (trylock_result ==0 ) { +/* we managed to grab the lock; therefore, it wasn't locked */ + unlock_result =pthread_mutex_unlock (&pcm->lock); +assert (unlock_result ==0 ); +return 0 ; + }else { +/* we failed to grab the lock; therefore, it was locked */ +return 1 ; + } + }else { +return 0 ; + } +} +#else /* THREAD_SAFE_API */ #define __snd_pcm_lock (pcm) do {} while (0)#define __snd_pcm_unlock (pcm) do {} while (0)#define snd_pcm_lock (pcm) do {} while (0)#define snd_pcm_unlock (pcm) do {} while (0) +#define snd_pcm_is_locked (pcm) 0#endif /* THREAD_SAFE_API */
Signature · 6 lines
2.23.0 _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
PATCH 2/3 pcm_ioplug: Don't unlock+lock if we're not locked
In reply to Ben RussellThis fixes a deadlock when using the pcm_jack plugin via a plug.
Some snd_pcm_ioplug_* functions assumed that they were being called with the pcm mutex locked, and would perform an unlock-act-lock sequence in order to allow the relevant function to lock the mutex itself.
If the mutex was not locked before calling these functions, it would silently fail on unlocking the mutex, and then erroneously leave the mutex locked as it left the function.
This patch checks to see if the mutex is locked before attempting the unlock-act-lock sequence. If the mutex is not locked when entering these functions, then we act and leave the mutex unlocked.
--- src/pcm/pcm_ioplug.c | 50 +++++++++++++++++++++++++++++++------------- 1 file changed, 35 insertions(+), 15 deletions(-)
src/pcm/pcm_ioplug.c +35 -15
@@ -164,9 +164,13 @@ static int snd_pcm_ioplug_prepare(snd_pcm_t *pcm)snd_pcm_ioplug_reset (pcm);if (io->data->callback->prepare) { -snd_pcm_unlock (pcm);/* to avoid deadlock */ - err = io->data->callback->prepare (io->data); -snd_pcm_lock (pcm); +if (snd_pcm_is_locked (pcm)) { +snd_pcm_unlock (pcm);/* to avoid deadlock */ + err = io->data->callback->prepare (io->data); +snd_pcm_lock (pcm); + }else { + err = io->data->callback->prepare (io->data); + } }if (err <0 )return err;
@@ -463,9 +467,13 @@ static int snd_pcm_ioplug_sw_params(snd_pcm_t *pcm, snd_pcm_sw_params_t *params)if (!io->data->callback->sw_params)return 0 ; -snd_pcm_unlock (pcm);/* to avoid deadlock */ - err = io->data->callback->sw_params (io->data, params); -snd_pcm_lock (pcm); +if (snd_pcm_is_locked (pcm)) { +snd_pcm_unlock (pcm);/* to avoid deadlock */ + err = io->data->callback->sw_params (io->data, params); +snd_pcm_lock (pcm); + }else { + err = io->data->callback->sw_params (io->data, params); + }return err; }
@@ -764,9 +772,13 @@ static int snd_pcm_ioplug_poll_descriptors_count(snd_pcm_t *pcm)int err =1 ;if (io->data->callback->poll_descriptors_count) { -snd_pcm_unlock (pcm);/* to avoid deadlock */ - err = io->data->callback->poll_descriptors_count (io->data); -snd_pcm_lock (pcm); +if (snd_pcm_is_locked (pcm)) { +snd_pcm_unlock (pcm);/* to avoid deadlock */ + err = io->data->callback->poll_descriptors_count (io->data); +snd_pcm_lock (pcm); + }else { + err = io->data->callback->poll_descriptors_count (io->data); + } }return err; }
@@ -777,9 +789,13 @@ static int snd_pcm_ioplug_poll_descriptors(snd_pcm_t *pcm, struct pollfd *pfds,int err;if (io->data->callback->poll_descriptors) { -snd_pcm_unlock (pcm);/* to avoid deadlock */ - err = io->data->callback->poll_descriptors (io->data, pfds, space); -snd_pcm_lock (pcm); +if (snd_pcm_is_locked (pcm)) { +snd_pcm_unlock (pcm);/* to avoid deadlock */ + err = io->data->callback->poll_descriptors (io->data, pfds, space); +snd_pcm_lock (pcm); + }else { + err = io->data->callback->poll_descriptors (io->data, pfds, space); + }return err; }if (pcm->poll_fd <0 )
@@ -799,9 +815,13 @@ static int snd_pcm_ioplug_poll_revents(snd_pcm_t *pcm, struct pollfd *pfds, unsiint err;if (io->data->callback->poll_revents) { -snd_pcm_unlock (pcm);/* to avoid deadlock */ - err = io->data->callback->poll_revents (io->data, pfds, nfds, revents); -snd_pcm_lock (pcm); +if (snd_pcm_is_locked (pcm)) { +snd_pcm_unlock (pcm);/* to avoid deadlock */ + err = io->data->callback->poll_revents (io->data, pfds, nfds, revents); +snd_pcm_lock (pcm); + }else { + err = io->data->callback->poll_revents (io->data, pfds, nfds, revents); + } }else { *revents = pfds->revents; err =0 ;
Signature · 6 lines
2.23.0 _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
PATCH 3/3 pcm_local: assert() when using mutexes incorrectly
In reply to Ben RussellThis makes it easier to find pcm mutex handling errors.
--- src/pcm/pcm_local.h | 32 ++++++++++++++++++++++++-------- 1 file changed, 24 insertions(+), 8 deletions(-)
src/pcm/pcm_local.h +24 -8
@@ -1153,23 +1153,39 @@ static inline void sw_set_period_event(snd_pcm_sw_params_t *params, int val)*/ static inline void __snd_pcm_lock (snd_pcm_t *pcm) { -if (pcm->lock_enabled) -pthread_mutex_lock (&pcm->lock); +int lock_err; + +if (pcm->lock_enabled) { + lock_err =pthread_mutex_lock (&pcm->lock); +assert (lock_err ==0 ); + } }static inline void __snd_pcm_unlock (snd_pcm_t *pcm) { -if (pcm->lock_enabled) -pthread_mutex_unlock (&pcm->lock); +int unlock_err; + +if (pcm->lock_enabled) { + unlock_err =pthread_mutex_unlock (&pcm->lock); +assert (unlock_err ==0 ); + } }static inline void snd_pcm_lock (snd_pcm_t *pcm) { -if (pcm->lock_enabled && pcm->need_lock) -pthread_mutex_lock (&pcm->lock); +int lock_err; + +if (pcm->lock_enabled && pcm->need_lock) { + lock_err =pthread_mutex_lock (&pcm->lock); +assert (lock_err ==0 ); + } }static inline void snd_pcm_unlock (snd_pcm_t *pcm) { -if (pcm->lock_enabled && pcm->need_lock) -pthread_mutex_unlock (&pcm->lock); +int unlock_err; + +if (pcm->lock_enabled && pcm->need_lock) { + unlock_err =pthread_mutex_unlock (&pcm->lock); +assert (unlock_err ==0 ); + } }/*
Signature · 6 lines
2.23.0 _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 26 lines · Ben Russell
This is my first time contributing a patch to a mailing list. If I've made a mess, please let me know so I can learn how to avoid it in future.
The purpose of this patchset is to fix a specific common lockup in the
pcm_jackplugin (from alsa-plugins). I'm not sure if this is the right approach to take, but at the very least it should make thepcm_ioplugcode a bit more resilient.The problem is this: When using the
pcm_jackplugin, if a program attempts to play audio using theSND_PCM_FORMAT_FLOATformat, said program locks up.This should be enough to reproduce the bug:
pcm.rawjack { type jack playback_ports { 0 system:playback_1 1 system:playback_2 } capture_ports { 0 system:capture_1 1 system:capture_2 } } pcm.!default { type plug slave.pcm "rawjack" }
Quoted 7 lines
What's happening is that several snd_pcm_ioplug_* functions assume that the pcm mutex is locked already. It then proceeds to unlock the mutex, call a function, and then relock the mutex. When the mutex isn't locked already, the initial unlock results in a silently ignored pthread error, and the lock results in the program eventually deadlocking as it doesn't expect the mutex to be held at that point.
Patch 2 modifies
pcm_ioplugto check if the mutex is held before doing the unlock-act-lock sequence, and if the mutex is not held then it skips the unlock and lock stages. This depends on Patch 1, which adds asnd_pcm_is_lockedfunction to give the state of the mutex.Patch 3 is completely optional. It adds assertions which make sure that all uses of snd_pcm_lock/snd_pcm_unlock are correct. On one hand this will likely result in crashes in some of the less refined parts of the code. On the other hand, when that happens, you'll know which parts need a bit more love. I know it was useful for finding this issue in the first place.
These patches fix the problems I am having, but if you have a more suitable approach to fixing this problem then please let me know.
Thanks for the analysis and patches. It's indeed a serious problem we need to address.
The current semantics of locking in alsa-lib code assumes that the lock/unlock never fails. So the "right-and-quick" fix would be just to take the patch 3 to assert() upon pthread_mutex_lock/unlock errors. Then we need to paper over the actual invalid locks.
I do wonder, though, exactly which code path triggers the pthread mutex error? You should be able to catch it via gdb after the patch.
thanks,
Takashi
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 44 lines · On Sun, 22 Sep 2019 22:25:48 +0200 Takashi Iwai <[email protected]> wrote:
Quoted 26 lines · Ben Russell
This is my first time contributing a patch to a mailing list. If I've made a mess, please let me know so I can learn how to avoid it in future.
The purpose of this patchset is to fix a specific common lockup in the
pcm_jackplugin (from alsa-plugins). I'm not sure if this is the right approach to take, but at the very least it should make thepcm_ioplugcode a bit more resilient.The problem is this: When using the
pcm_jackplugin, if a program attempts to play audio using theSND_PCM_FORMAT_FLOATformat, said program locks up.This should be enough to reproduce the bug:
pcm.rawjack { type jack playback_ports { 0 system:playback_1 1 system:playback_2 } capture_ports { 0 system:capture_1 1 system:capture_2 } } pcm.!default { type plug slave.pcm "rawjack" }Quoted 7 lines
What's happening is that several snd_pcm_ioplug_* functions assume that the pcm mutex is locked already. It then proceeds to unlock the mutex, call a function, and then relock the mutex. When the mutex isn't locked already, the initial unlock results in a silently ignored pthread error, and the lock results in the program eventually deadlocking as it doesn't expect the mutex to be held at that point.
Patch 2 modifies
pcm_ioplugto check if the mutex is held before doing the unlock-act-lock sequence, and if the mutex is not held then it skips the unlock and lock stages. This depends on Patch 1, which adds asnd_pcm_is_lockedfunction to give the state of the mutex.Patch 3 is completely optional. It adds assertions which make sure that all uses of snd_pcm_lock/snd_pcm_unlock are correct. On one hand this will likely result in crashes in some of the less refined parts of the code. On the other hand, when that happens, you'll know which parts need a bit more love. I know it was useful for finding this issue in the first place.
These patches fix the problems I am having, but if you have a more suitable approach to fixing this problem then please let me know.
Thanks for the analysis and patches. It's indeed a serious problem we need to address.
The current semantics of locking in alsa-lib code assumes that the lock/unlock never fails. So the "right-and-quick" fix would be just to take the patch 3 to
assert()upon pthread_mutex_lock/unlock errors. Then we need to paper over the actual invalid locks.
Quoted 7 lines
I do wonder, though, exactly which code path triggers the pthread mutex error? You should be able to catch it via gdb after the patch.
thanks,
Takashi
Sure thing. With patch #3 against commit 1d7a131f, this trips up on an assert:
$ gdb --args mpv --ao=alsa --audio-format=float RESPECOGNIZE.mp3
The relevant backtrace:
#4 0x00007ffff4b06cf3 in snd_pcm_unlock (pcm=0x5555558625c0) at pcm_local.h:1187 #5 0x00007ffff4b075b3 in snd_pcm_unlock (pcm=0x5555558625c0) at pcm_local.h:1187
if (pcm->lock_enabled && pcm->need_lock) {
unlock_err = pthread_mutex_unlock(&pcm->lock);
assert(unlock_err == 0); <-- this line
}
#6 snd_pcm_ioplug_prepare (pcm=0x5555558625c0) at pcm_ioplug.c:167
snd_pcm_ioplug_reset(pcm);
if (io->data->callback->prepare) {
snd_pcm_unlock(pcm); /* to avoid deadlock */ <-- this line
err = io->data->callback->prepare(io->data);
snd_pcm_lock(pcm);
}
#7 0x00007ffff4abcba0 in snd_pcm_prepare (pcm=0x5555558627c0) at pcm.c:1214
snd_pcm_lock(pcm);
if (pcm->fast_ops->prepare)
err = pcm->fast_ops->prepare(pcm->fast_op_arg); <-- this line
else
err = -ENOSYS;#8 0x00005555555a2efa in ?? ()
Using --audio-format=s16 does not deadlock, as it goes via pcm_plugin before it can go via pcm_ioplug (it's most likely for sample format conversion):
#0 0x00007ffff4b07522 in snd_pcm_unlock (pcm=<optimized out>) at pcm_ioplug.c:166 #1 snd_pcm_ioplug_prepare (pcm=0x555555862640) at pcm_ioplug.c:167 #2 0x00007ffff4abcba0 in snd_pcm_prepare (pcm=0x555555862640) at pcm.c:1214 #3 0x00007ffff4ad2ed7 in snd_pcm_plugin_prepare (pcm=0x555555862e50) at pcm_plugin.c:159 snd_pcm_plugin_t *plugin = pcm->private_data; int err; err = snd_pcm_prepare(plugin->gen.slave); <-- this line if (err < 0) return err;
#4 0x00007ffff4abcba0 in snd_pcm_prepare (pcm=0x555555862840) at pcm.c:1214 #5 0x00005555555a2efa in ?? ()
Regards,
Ben R
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 94 lines · Ben Russell
Quoted 44 lines · On Sun, 22 Sep 2019 22:25:48 +0200 Takashi Iwai <[email protected]> wrote:
Quoted 26 lines · Ben Russell
This is my first time contributing a patch to a mailing list. If I've made a mess, please let me know so I can learn how to avoid it in future.
The purpose of this patchset is to fix a specific common lockup in the
pcm_jackplugin (from alsa-plugins). I'm not sure if this is the right approach to take, but at the very least it should make thepcm_ioplugcode a bit more resilient.The problem is this: When using the
pcm_jackplugin, if a program attempts to play audio using theSND_PCM_FORMAT_FLOATformat, said program locks up.This should be enough to reproduce the bug:
pcm.rawjack { type jack playback_ports { 0 system:playback_1 1 system:playback_2 } capture_ports { 0 system:capture_1 1 system:capture_2 } } pcm.!default { type plug slave.pcm "rawjack" }Quoted 7 lines
What's happening is that several snd_pcm_ioplug_* functions assume that the pcm mutex is locked already. It then proceeds to unlock the mutex, call a function, and then relock the mutex. When the mutex isn't locked already, the initial unlock results in a silently ignored pthread error, and the lock results in the program eventually deadlocking as it doesn't expect the mutex to be held at that point.
Patch 2 modifies
pcm_ioplugto check if the mutex is held before doing the unlock-act-lock sequence, and if the mutex is not held then it skips the unlock and lock stages. This depends on Patch 1, which adds asnd_pcm_is_lockedfunction to give the state of the mutex.Patch 3 is completely optional. It adds assertions which make sure that all uses of snd_pcm_lock/snd_pcm_unlock are correct. On one hand this will likely result in crashes in some of the less refined parts of the code. On the other hand, when that happens, you'll know which parts need a bit more love. I know it was useful for finding this issue in the first place.
These patches fix the problems I am having, but if you have a more suitable approach to fixing this problem then please let me know.
Thanks for the analysis and patches. It's indeed a serious problem we need to address.
The current semantics of locking in alsa-lib code assumes that the lock/unlock never fails. So the "right-and-quick" fix would be just to take the patch 3 to
assert()upon pthread_mutex_lock/unlock errors. Then we need to paper over the actual invalid locks.Quoted 7 lines
I do wonder, though, exactly which code path triggers the pthread mutex error? You should be able to catch it via gdb after the patch.
thanks,
Takashi
Sure thing. With patch #3 against commit
1d7a131f, this trips up on an assert:$ gdb --args mpv --ao=alsa --audio-format=float RESPECOGNIZE.mp3The relevant backtrace:
#4
0x00007ffff4b06cf3insnd_pcm_unlock(pcm=0x5555558625c0) at pcm_local.h:1187 #50x00007ffff4b075b3insnd_pcm_unlock(pcm=0x5555558625c0) at pcm_local.h:1187if (pcm->lock_enabled && pcm->need_lock) { unlock_err = pthread_mutex_unlock(&pcm->lock); assert(unlock_err == 0); <-- this line } #6 snd_pcm_ioplug_prepare (pcm=0x5555558625c0) at pcm_ioplug.c:167 snd_pcm_ioplug_reset(pcm); if (io->data->callback->prepare) { snd_pcm_unlock(pcm); /* to avoid deadlock */ <-- this line err = io->data->callback->prepare(io->data); snd_pcm_lock(pcm); } #7 0x00007ffff4abcba0 in snd_pcm_prepare (pcm=0x5555558627c0) at pcm.c:1214 snd_pcm_lock(pcm); if (pcm->fast_ops->prepare) err = pcm->fast_ops->prepare(pcm->fast_op_arg); <-- this line else err = -ENOSYS;#8
0x00005555555a2efain ?? ()Using --audio-format=s16 does not deadlock, as it goes via
pcm_pluginbefore it can go viapcm_ioplug(it's most likely for sample format conversion):#0 0x00007ffff4b07522 in snd_pcm_unlock (pcm=<optimized out>) at pcm_ioplug.c:166 #1 snd_pcm_ioplug_prepare (pcm=0x555555862640) at pcm_ioplug.c:167 #2 0x00007ffff4abcba0 in snd_pcm_prepare (pcm=0x555555862640) at pcm.c:1214 #3 0x00007ffff4ad2ed7 in snd_pcm_plugin_prepare (pcm=0x555555862e50) at pcm_plugin.c:159 snd_pcm_plugin_t *plugin = pcm->private_data; int err; err = snd_pcm_prepare(plugin->gen.slave); <-- this line if (err < 0) return err;
Quoted 2 lines
#4
0x00007ffff4abcba0insnd_pcm_prepare(pcm=0x555555862840) at pcm.c:1214 #50x00005555555a2efain ?? ()
Thanks, after reading the traces carefully, finally I figured out what went wrong. In some cases, pcm->fast_op_arg isn't pcm itself but has a different value. Then we call snd_pcm_lock() with pcm, but call fast_op with fast_op_arg as the PCM object. This leads to the unexpected behavior for the plugin that tries to unlock / relock from the given PCM object.
So, we'd need to convert snd_pcm_lock()/unlock() with fast_op_arg or op_arg in most places.
A test fix patch is below. Could you test it quickly?
I'm going to traveling from tomorrow, so I'd like to have confirmation before merging into git repo.
thanks,
Takashi
-- 8< --
From: Takashi Iwai <[email protected]>
Subject: [PATCH] pcm: Fix the wrong PCM object passed for locking/unlocking
Most of PCM API functions have snd_pcm_lock()/unlock() wraps for the actual calls of ops, and some plugins try to unlock/relock internally for the given PCM object. This, unfortunately, causes a problem in some configurations and leads to the unexpected behavior or deadlock.
The main problem is that we call snd_pcm_lock() with the given PCM object, while calling the ops with pcm->op_arg or pcm->fast_op_arg as the slave PCM object. Meanwhile the plugin code assumes that the passed PCM object is already locked, and calls snd_pcm_unlock(). This bug doesn't hit always because in most cases pcm->op_arg and fast_op_arg are identical with pcm itself. But in some configurations they have different values, so the problem surfaces.
This patch is an attempt to resolve these inconsistencies. It replaces most of snd_pcm_lock()/unlock() calls with either pcm->op_arg or pcm->fast_op_arg, depending on the call pattern, so that the plugin code can safely run snd_pcm_unlock() to the given PCM object.
--- src/pcm/pcm.c | 114 +++++++++++++++++++++++++++++----------------------------- 1 file changed, 57 insertions(+), 57 deletions(-)
src/pcm/pcm.c +57 -57
@@ -789,7 +789,7 @@ int snd_pcm_nonblock(snd_pcm_t *pcm, int nonblock)/* FIXME: __snd_pcm_lock() call below is commented out because of the * the possible deadlock in signal handler calling snd_pcm_abort() */ -/* __snd_pcm_lock(pcm); */ /* forced lock due to pcm field change */ +/* __snd_pcm_lock(pcm->op_arg); */ /* forced lock due to pcm field change */ if (pcm->ops->nonblock) err = pcm->ops->nonblock (pcm->op_arg, nonblock);else
@@ -809,7 +809,7 @@ int snd_pcm_nonblock(snd_pcm_t *pcm, int nonblock) pcm->mode &= ~SND_PCM_NONBLOCK ; } unlock: -/* __snd_pcm_unlock(pcm); */ /* FIXME: see above */ +/* __snd_pcm_unlock(pcm->op_arg); */ /* FIXME: see above */ return err; }
@@ -989,13 +989,13 @@ int snd_pcm_sw_params(snd_pcm_t *pcm, snd_pcm_sw_params_t *params) return -EINVAL; }#endif -__snd_pcm_lock (pcm);/* forced lock due to pcm field change */ +__snd_pcm_lock (pcm->op_arg);/* forced lock due to pcm field change */ if (pcm->ops->sw_params) err = pcm->ops->sw_params (pcm->op_arg, params);else err = -ENOSYS ;if (err <0 ) { -__snd_pcm_unlock (pcm); +__snd_pcm_unlock (pcm->op_arg);return err; } pcm->tstamp_mode = params->tstamp_mode;
@@ -1008,7 +1008,7 @@ int snd_pcm_sw_params(snd_pcm_t *pcm, snd_pcm_sw_params_t *params) pcm->silence_threshold = params->silence_threshold; pcm->silence_size = params->silence_size; pcm->boundary = params->boundary; -__snd_pcm_unlock (pcm); +__snd_pcm_unlock (pcm->op_arg);return 0 ; }
@@ -1025,12 +1025,12 @@ int snd_pcm_status(snd_pcm_t *pcm, snd_pcm_status_t *status)int err;assert (pcm && status); -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg);if (pcm->fast_ops->status) err = pcm->fast_ops->status (pcm->fast_op_arg, status);else err = -ENOSYS ; -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return err; }
@@ -1050,9 +1050,9 @@ snd_pcm_state_t snd_pcm_state(snd_pcm_t *pcm)snd_pcm_state_t state;assert (pcm); -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg); state =__snd_pcm_state (pcm); -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return state; }
@@ -1078,9 +1078,9 @@ int snd_pcm_hwsync(snd_pcm_t *pcm)SNDMSG ("PCM not set up" );return -EIO ; } -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg); err =__snd_pcm_hwsync (pcm); -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return err; }
@@ -1123,9 +1123,9 @@ int snd_pcm_delay(snd_pcm_t *pcm, snd_pcm_sframes_t *delayp)SNDMSG ("PCM not set up" );return -EIO ; } -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg); err =__snd_pcm_delay (pcm, delayp); -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return err; }
@@ -1181,12 +1181,12 @@ int snd_pcm_htimestamp(snd_pcm_t *pcm, snd_pcm_uframes_t *avail, snd_htimestamp_SNDMSG ("PCM not set up" );return -EIO ; } -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg);if (pcm->fast_ops->htimestamp) err = pcm->fast_ops->htimestamp (pcm->fast_op_arg, avail, tstamp);else err = -ENOSYS ; -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return err; }
@@ -1209,12 +1209,12 @@ int snd_pcm_prepare(snd_pcm_t *pcm) err =bad_pcm_state (pcm, ~P_STATE (DISCONNECTED ));if (err <0 )return err; -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg);if (pcm->fast_ops->prepare) err = pcm->fast_ops->prepare (pcm->fast_op_arg);else err = -ENOSYS ; -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return err; }
@@ -1236,12 +1236,12 @@ int snd_pcm_reset(snd_pcm_t *pcm)SNDMSG ("PCM not set up" );return -EIO ; } -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg);if (pcm->fast_ops->reset) err = pcm->fast_ops->reset (pcm->fast_op_arg);else err = -ENOSYS ; -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return err; }
@@ -1264,9 +1264,9 @@ int snd_pcm_start(snd_pcm_t *pcm) err =bad_pcm_state (pcm,P_STATE (PREPARED ));if (err <0 )return err; -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg); err =__snd_pcm_start (pcm); -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return err; }
@@ -1296,12 +1296,12 @@ int snd_pcm_drop(snd_pcm_t *pcm) P_STATE(SUSPENDED));if (err <0 )return err; -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg);if (pcm->fast_ops->drop) err = pcm->fast_ops->drop (pcm->fast_op_arg);else err = -ENOSYS ; -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return err; }
@@ -1364,12 +1364,12 @@ int snd_pcm_pause(snd_pcm_t *pcm, int enable) err =bad_pcm_state (pcm,P_STATE_RUNNABLE );if (err <0 )return err; -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg);if (pcm->fast_ops->pause) err = pcm->fast_ops->pause (pcm->fast_op_arg, enable);else err = -ENOSYS ; -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return err; }
@@ -1397,12 +1397,12 @@ snd_pcm_sframes_t snd_pcm_rewindable(snd_pcm_t *pcm) err =bad_pcm_state (pcm,P_STATE_RUNNABLE );if (err <0 )return err; -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg);if (pcm->fast_ops->rewindable) result = pcm->fast_ops->rewindable (pcm->fast_op_arg);else result = -ENOSYS ; -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return result; }
@@ -1430,12 +1430,12 @@ snd_pcm_sframes_t snd_pcm_rewind(snd_pcm_t *pcm, snd_pcm_uframes_t frames) err =bad_pcm_state (pcm,P_STATE_RUNNABLE );if (err <0 )return err; -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg);if (pcm->fast_ops->rewind) result = pcm->fast_ops->rewind (pcm->fast_op_arg, frames);else result = -ENOSYS ; -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return result; }
@@ -1463,12 +1463,12 @@ snd_pcm_sframes_t snd_pcm_forwardable(snd_pcm_t *pcm) err =bad_pcm_state (pcm,P_STATE_RUNNABLE );if (err <0 )return err; -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg);if (pcm->fast_ops->forwardable) result = pcm->fast_ops->forwardable (pcm->fast_op_arg);else result = -ENOSYS ; -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return result; }
@@ -1500,12 +1500,12 @@ snd_pcm_sframes_t snd_pcm_forward(snd_pcm_t *pcm, snd_pcm_uframes_t frames) err =bad_pcm_state (pcm,P_STATE_RUNNABLE );if (err <0 )return err; -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg);if (pcm->fast_ops->forward) result = pcm->fast_ops->forward (pcm->fast_op_arg, frames);else result = -ENOSYS ; -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return result; } use_default_symbol_version(__snd_pcm_forward, snd_pcm_forward, ALSA_0.9.0rc8);
@@ -1724,9 +1724,9 @@ int snd_pcm_poll_descriptors_count(snd_pcm_t *pcm)int count;assert (pcm); -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg); count =__snd_pcm_poll_descriptors_count (pcm); -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return count; }
@@ -1782,9 +1782,9 @@ int snd_pcm_poll_descriptors(snd_pcm_t *pcm, struct pollfd *pfds, unsigned int sint err;assert (pcm && pfds); -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg); err =__snd_pcm_poll_descriptors (pcm, pfds, space); -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return err; }
@@ -1817,9 +1817,9 @@ int snd_pcm_poll_descriptors_revents(snd_pcm_t *pcm, struct pollfd *pfds, unsignint err;assert (pcm && pfds && revents); -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg); err =__snd_pcm_poll_revents (pcm, pfds, nfds, revents); -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return err; }
@@ -2816,9 +2816,9 @@ int snd_pcm_wait(snd_pcm_t *pcm, int timeout) {int err; -__snd_pcm_lock (pcm);/* forced lock */ +__snd_pcm_lock (pcm->fast_op_arg);/* forced lock */ err =__snd_pcm_wait_in_lock (pcm, timeout); -__snd_pcm_unlock (pcm); +__snd_pcm_unlock (pcm->fast_op_arg);return err; }
@@ -2865,9 +2865,9 @@ int snd_pcm_wait_nocheck(snd_pcm_t *pcm, int timeout)return -EIO ; } do { - __snd_pcm_unlock(pcm); + __snd_pcm_unlock(pcm->fast_op_arg); err_poll = poll(pfd, npfds, timeout); - __snd_pcm_lock(pcm); + __snd_pcm_lock(pcm->fast_op_arg); if (err_poll < 0) { if (errno == EINTR && !PCMINABORT(pcm)) continue;
@@ -2926,9 +2926,9 @@ snd_pcm_sframes_t snd_pcm_avail_update(snd_pcm_t *pcm) {snd_pcm_sframes_t result; -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg); result =__snd_pcm_avail_update (pcm); -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return result; }
@@ -2956,13 +2956,13 @@ snd_pcm_sframes_t snd_pcm_avail(snd_pcm_t *pcm)SNDMSG ("PCM not set up" );return -EIO ; } -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg); err =__snd_pcm_hwsync (pcm);if (err <0 ) result = err;else result =__snd_pcm_avail_update (pcm); -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return result; }
@@ -2989,7 +2989,7 @@ int snd_pcm_avail_delay(snd_pcm_t *pcm,SNDMSG ("PCM not set up" );return -EIO ; } -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg); err =__snd_pcm_hwsync (pcm);if (err <0 ) goto unlock;
@@ -3004,7 +3004,7 @@ int snd_pcm_avail_delay(snd_pcm_t *pcm, *availp = sf; err =0 ; unlock: -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return err; }
@@ -7192,9 +7192,9 @@ int snd_pcm_mmap_begin(snd_pcm_t *pcm, err =bad_pcm_state (pcm,P_STATE_RUNNABLE );if (err <0 )return err; -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg); err =__snd_pcm_mmap_begin (pcm, areas, offset, frames); -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return err; }
@@ -7297,9 +7297,9 @@ snd_pcm_sframes_t snd_pcm_mmap_commit(snd_pcm_t *pcm, err =bad_pcm_state (pcm,P_STATE_RUNNABLE );if (err <0 )return err; -snd_pcm_lock (pcm); +snd_pcm_lock (pcm->fast_op_arg); result =__snd_pcm_mmap_commit (pcm, offset, frames); -snd_pcm_unlock (pcm); +snd_pcm_unlock (pcm->fast_op_arg);return result; }
@@ -7375,7 +7375,7 @@ snd_pcm_sframes_t snd_pcm_read_areas(snd_pcm_t *pcm, const snd_pcm_channel_area_if (size ==0 )return 0 ; -__snd_pcm_lock (pcm);/* forced lock */ +__snd_pcm_lock (pcm->fast_op_arg);/* forced lock */ while (size >0 ) {snd_pcm_uframes_t frames;snd_pcm_sframes_t avail;
@@ -7434,7 +7434,7 @@ snd_pcm_sframes_t snd_pcm_read_areas(snd_pcm_t *pcm, const snd_pcm_channel_area_ xfer += frames; } _end: -__snd_pcm_unlock (pcm); +__snd_pcm_unlock (pcm->fast_op_arg);return xfer >0 ? (snd_pcm_sframes_t ) xfer :snd_pcm_check_error (pcm, err); }
@@ -7449,7 +7449,7 @@ snd_pcm_sframes_t snd_pcm_write_areas(snd_pcm_t *pcm, const snd_pcm_channel_areaif (size ==0 )return 0 ; -__snd_pcm_lock (pcm);/* forced lock */ +__snd_pcm_lock (pcm->fast_op_arg);/* forced lock */ while (size >0 ) {snd_pcm_uframes_t frames;snd_pcm_sframes_t avail;
@@ -7523,7 +7523,7 @@ snd_pcm_sframes_t snd_pcm_write_areas(snd_pcm_t *pcm, const snd_pcm_channel_area xfer += frames; } _end: -__snd_pcm_unlock (pcm); +__snd_pcm_unlock (pcm->fast_op_arg);return xfer >0 ? (snd_pcm_sframes_t ) xfer :snd_pcm_check_error (pcm, err); }
Signature · 6 lines
2.16.4 _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 114 lines · On Tue, 24 Sep 2019 12:18:24 +0200 Takashi Iwai <[email protected]> wrote:
Quoted 94 lines · Ben Russell
Quoted 44 lines · On Sun, 22 Sep 2019 22:25:48 +0200 Takashi Iwai <[email protected]> wrote:
Quoted 26 lines · Ben Russell
This is my first time contributing a patch to a mailing list. If I've made a mess, please let me know so I can learn how to avoid it in future.
The purpose of this patchset is to fix a specific common lockup in the
pcm_jackplugin (from alsa-plugins). I'm not sure if this is the right approach to take, but at the very least it should make thepcm_ioplugcode a bit more resilient.The problem is this: When using the
pcm_jackplugin, if a program attempts to play audio using theSND_PCM_FORMAT_FLOATformat, said program locks up.This should be enough to reproduce the bug:
pcm.rawjack { type jack playback_ports { 0 system:playback_1 1 system:playback_2 } capture_ports { 0 system:capture_1 1 system:capture_2 } } pcm.!default { type plug slave.pcm "rawjack" }Quoted 7 lines
What's happening is that several snd_pcm_ioplug_* functions assume that the pcm mutex is locked already. It then proceeds to unlock the mutex, call a function, and then relock the mutex. When the mutex isn't locked already, the initial unlock results in a silently ignored pthread error, and the lock results in the program eventually deadlocking as it doesn't expect the mutex to be held at that point.
Patch 2 modifies
pcm_ioplugto check if the mutex is held before doing the unlock-act-lock sequence, and if the mutex is not held then it skips the unlock and lock stages. This depends on Patch 1, which adds asnd_pcm_is_lockedfunction to give the state of the mutex.Patch 3 is completely optional. It adds assertions which make sure that all uses of snd_pcm_lock/snd_pcm_unlock are correct. On one hand this will likely result in crashes in some of the less refined parts of the code. On the other hand, when that happens, you'll know which parts need a bit more love. I know it was useful for finding this issue in the first place.
These patches fix the problems I am having, but if you have a more suitable approach to fixing this problem then please let me know.
Thanks for the analysis and patches. It's indeed a serious problem we need to address.
The current semantics of locking in alsa-lib code assumes that the lock/unlock never fails. So the "right-and-quick" fix would be just to take the patch 3 to
assert()upon pthread_mutex_lock/unlock errors. Then we need to paper over the actual invalid locks.Quoted 7 lines
I do wonder, though, exactly which code path triggers the pthread mutex error? You should be able to catch it via gdb after the patch.
thanks,
Takashi
Sure thing. With patch #3 against commit
1d7a131f, this trips up on an assert:$ gdb --args mpv --ao=alsa --audio-format=float RESPECOGNIZE.mp3The relevant backtrace:
#4
0x00007ffff4b06cf3insnd_pcm_unlock(pcm=0x5555558625c0) at pcm_local.h:1187 #50x00007ffff4b075b3insnd_pcm_unlock(pcm=0x5555558625c0) at pcm_local.h:1187if (pcm->lock_enabled && pcm->need_lock) { unlock_err = pthread_mutex_unlock(&pcm->lock); assert(unlock_err == 0); <-- this line } #6 snd_pcm_ioplug_prepare (pcm=0x5555558625c0) at pcm_ioplug.c:167 snd_pcm_ioplug_reset(pcm); if (io->data->callback->prepare) { snd_pcm_unlock(pcm); /* to avoid deadlock */ <-- this line err = io->data->callback->prepare(io->data); snd_pcm_lock(pcm); } #7 0x00007ffff4abcba0 in snd_pcm_prepare (pcm=0x5555558627c0) at pcm.c:1214 snd_pcm_lock(pcm); if (pcm->fast_ops->prepare) err = pcm->fast_ops->prepare(pcm->fast_op_arg); <-- this line else err = -ENOSYS;#8
0x00005555555a2efain ?? ()Using --audio-format=s16 does not deadlock, as it goes via
pcm_pluginbefore it can go viapcm_ioplug(it's most likely for sample format conversion):#0 0x00007ffff4b07522 in snd_pcm_unlock (pcm=<optimized out>) at pcm_ioplug.c:166 #1 snd_pcm_ioplug_prepare (pcm=0x555555862640) at pcm_ioplug.c:167 #2 0x00007ffff4abcba0 in snd_pcm_prepare (pcm=0x555555862640) at pcm.c:1214 #3 0x00007ffff4ad2ed7 in snd_pcm_plugin_prepare (pcm=0x555555862e50) at pcm_plugin.c:159 snd_pcm_plugin_t *plugin = pcm->private_data; int err; err = snd_pcm_prepare(plugin->gen.slave); <-- this line if (err < 0) return err;Quoted 2 lines
#4
0x00007ffff4abcba0insnd_pcm_prepare(pcm=0x555555862840) at pcm.c:1214 #50x00005555555a2efain ?? ()Thanks, after reading the traces carefully, finally I figured out what went wrong. In some cases,
pcm->fast_op_argisn't pcm itself but has a different value. Then we callsnd_pcm_lock()with pcm, but callfast_opwithfast_op_argas the PCM object. This leads to the unexpected behavior for the plugin that tries to unlock / relock from the given PCM object.So, we'd need to convert snd_pcm_lock()/unlock() with
fast_op_argorop_argin most places.A test fix patch is below. Could you test it quickly?
I'm going to traveling from tomorrow, so I'd like to have confirmation before merging into git repo.
Quoted 5 lines
thanks,
Takashi
-- 8< --
The patch works fine. mpv works for float and s16, Wine works, Mumble works for capture and playback.
Thanks for tracking this down so quickly.
Regards,
Ben R
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel