Clear Color Support for TGL Render Decompression
v2 cover Clear Color Support for TGL Render Decompression
Support for Clear Color is contained in the last two patches submitted by Radhakrishna Sripada. The first 9 patches are currently undergoing review/revision changes. The first 9 patches are cherry-picked from the series
https://patchwork.freedesktop.org/series/67078/
Expecting feedback for the last 2 patches. The infrastructure to test the patch series is WIP.
Dhinakaran Pandiyan (9):
drm/framebuffer: Format modifier for Intel Gen-12 render compression drm/i915: Use intel_tile_height() instead of re-implementing drm/i915: Move CCS stride alignment W/A inside
intel_fb_stride_alignment
drm/i915/tgl: Gen-12 render decompression
drm/i915: Extract framebufer CCS offset checks into a function drm/framebuffer: Format modifier for Intel Gen-12 media compression drm/i915: Skip rotated offset adjustment for unsupported modifiers drm/fb: Extend format_info member arrays to handle four planes Gen-12 display can decompress surfaces compressed by the media engine.
Radhakrishna Sripada (2):
drm/framebuffer/tgl: Format modifier for Intel Gen 12 render
compression with Clear Color
drm/i915/tgl: Add Clear Color supoort for TGL Render Decompression
drivers/gpu/drm/i915/display/intel_display.c | 424 ++++++++++++++---- .../drm/i915/display/intel_display_types.h | 5 +- drivers/gpu/drm/i915/display/intel_sprite.c | 70 ++- drivers/gpu/drm/i915/i915_reg.h | 14 + include/drm/drm_fourcc.h | 8 +- include/uapi/drm/drm_fourcc.h | 35 ++ 6 files changed, 441 insertions(+), 115 deletions(-)
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 1/11 drm/framebuffer: Format modifier for Intel Gen-12 render compression
From: Dhinakaran Pandiyan <[email protected]>
Gen-12 has a new compression format, add a new modifier to indicate that.
--- include/uapi/drm/drm_fourcc.h | 11 +++++++++++ 1 file changed, 11 insertions(+)
include/uapi/drm/drm_fourcc.h +11 -0
@@ -410,6 +410,17 @@ extern "C" {#define I915_FORMAT_MOD_Y_TILED_CCS fourcc_mod_code(INTEL, 4)#define I915_FORMAT_MOD_Yf_TILED_CCS fourcc_mod_code(INTEL, 5) +/* +* Intel color control surfaces (CCS) for Gen-12 render compression. +* +* The main surface is Y-tiled and at plane index 0, the CCS is linear and +* at index 1. A 64B CCS cache line corresponds to an area of 4x1 tiles in +* main surface. In other words, 4 bits in CCS map to a main surface cache +* line pair. The main surface pitch is required to be a multiple of four +* Y-tile widths. +*/ +#define I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS fourcc_mod_code(INTEL, 6) +/* * Tiled, NV12MT, grouped in 64 (pixels) x 32 (lines) -sized macroblocks *
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 2/11 drm/i915: Use intel_tile_height() instead of re-implementing
In reply to Radhakrishna SripadaFrom: Dhinakaran Pandiyan <[email protected]>
intel_tile_dims() computes tile height using size and width, when there is already a function to do just that - intel_tile_height()
--- drivers/gpu/drm/i915/display/intel_display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display.c +1 -1
@@ -1957,7 +1957,7 @@ static void intel_tile_dims(const struct drm_framebuffer *fb, int color_plane,unsigned int cpp = fb->format->cpp[color_plane]; *tile_width = tile_width_bytes / cpp; - *tile_height =intel_tile_size (to_i915 (fb->dev)) / tile_width_bytes; + *tile_height =intel_tile_height (fb, color_plane); }unsigned int
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 3/11 drm/i915: Move CCS stride alignment W/A inside intel_fb_stride_alignment
In reply to Radhakrishna SripadaFrom: Dhinakaran Pandiyan <[email protected]>
Easier to read if all the alignment changes are in one place and contained within a function.
--- drivers/gpu/drm/i915/display/intel_display.c | 31 ++++++++++---------- 1 file changed, 16 insertions(+), 15 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +16 -15
@@ -2551,7 +2551,22 @@ intel_fb_stride_alignment(const struct drm_framebuffer *fb, int color_plane)else return 64 ; }else { -return intel_tile_width_bytes (fb, color_plane); +u32 tile_width =intel_tile_width_bytes (fb, color_plane); + +/* +* Display WA #0531: skl,bxt,kbl,glk +* +* Render decompression and plane width > 3840 +* combined with horizontal panning requires the +* plane stride to be a multiple of 4. We'll just +* require the entire fb to accommodate that to avoid +* potential runtime errors at plane configuration time. +*/ +if (IS_GEN (dev_priv,9 ) &&is_ccs_modifier (fb->modifier) && + color_plane ==0 && fb->width >3840 ) + tile_width *=4 ; + +return tile_width; } }
@@ -15705,20 +15720,6 @@ static int intel_framebuffer_init(struct intel_framebuffer *intel_fb, } stride_alignment =intel_fb_stride_alignment (fb, i); - -/* -* Display WA #0531: skl,bxt,kbl,glk -* -* Render decompression and plane width > 3840 -* combined with horizontal panning requires the -* plane stride to be a multiple of 4. We'll just -* require the entire fb to accommodate that to avoid -* potential runtime errors at plane configuration time. -*/ -if (IS_GEN (dev_priv,9 ) && i ==0 && fb->width >3840 && -is_ccs_modifier (fb->modifier)) - stride_alignment *=4 ; -if (fb->pitches[i] & (stride_alignment -1 )) {DRM_DEBUG_KMS ("plane %d pitch (%d) must be at least %u byte aligned\n" , i, fb->pitches[i], stride_alignment);
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 4/11 drm/i915/tgl: Gen-12 render decompression
In reply to Radhakrishna SripadaFrom: Dhinakaran Pandiyan <[email protected]>
Gen-12 display decompression operates on Y-tiled compressed main surface. The CCS is linear and has 4 bits of metadata for each main surface cache line pair, a size ratio of 1:256. Gen-12 display decompression is incompatible with buffers compressed by earlier GPUs, so make use of a new modifier to identify gen-12 compression. Another notable change is that render decompression is supported on all planes except cursor and on all pipes. Start by adding render decompression support for [A,X]BGR888 pixel formats.
v2: Fix checkpatch warnings (Lucas)
v3:
Rebase, disable color clear, styling changes and modify intel_tile_width_bytes and intel_tile_height to handle linear CCS
--- drivers/gpu/drm/i915/display/intel_display.c | 85 ++++++++++++++++---- drivers/gpu/drm/i915/display/intel_sprite.c | 23 ++++-- drivers/gpu/drm/i915/i915_reg.h | 1 + 3 files changed, 84 insertions(+), 25 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +68 -17
@@ -1911,6 +1911,10 @@ intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)if (color_plane ==1 )return 128 ;/* fall through */ +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +if (color_plane ==1 ) +return 64 ; +/* fall through */ case I915_FORMAT_MOD_Y_TILED :if (IS_GEN (dev_priv,2 ) ||HAS_128_BYTE_Y_TILING (dev_priv))return 128 ;
@@ -1944,8 +1948,15 @@ intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)static unsigned int intel_tile_height (const struct drm_framebuffer *fb,int color_plane) { -return intel_tile_size (to_i915 (fb->dev)) / -intel_tile_width_bytes (fb, color_plane); +switch (fb->modifier) { +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +if (color_plane ==1 ) +return 1 ; +/* fall through */ +default : +return intel_tile_size (to_i915 (fb->dev)) / +intel_tile_width_bytes (fb, color_plane); + } }/* Return the tile dimensions in pixel units */
@@ -2044,6 +2055,8 @@ static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,if (INTEL_GEN (dev_priv) >=9 )return 256 *1024 ;return 0 ; +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +return 16 *1024 ;case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Yf_TILED_CCS:case I915_FORMAT_MOD_Y_TILED :
@@ -2243,7 +2256,8 @@ static u32 intel_adjust_tile_offset(int *x, int *y,static bool is_surface_linear (u64 modifier,int color_plane) { -return modifier ==DRM_FORMAT_MOD_LINEAR ; +return modifier ==DRM_FORMAT_MOD_LINEAR || + (modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS && color_plane ==1 ); } static u32 intel_adjust_aligned_offset(int *x, int *y,
@@ -2430,6 +2444,7 @@ static unsigned int intel_fb_modifier_to_tiling(u64 fb_modifier)return I915_TILING_X ;case I915_FORMAT_MOD_Y_TILED :case I915_FORMAT_MOD_Y_TILED_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS :return I915_TILING_Y ;default :return I915_TILING_NONE ;
@@ -2450,7 +2465,7 @@ static unsigned int intel_fb_modifier_to_tiling(u64 fb_modifier)* us a ratio of one byte in the CCS for each 8x16 pixels in the * main surface. */ -static const struct drm_format_info ccs_formats[] = { +static const struct drm_format_info skl_ccs_formats[] = { { .format =DRM_FORMAT_XRGB8888 , .depth =24 , .num_planes =2 , .cpp = {4 ,1 , }, .hsub =8 , .vsub =16 , }, { .format =DRM_FORMAT_XBGR8888 , .depth =24 , .num_planes =2 ,
@@ -2461,6 +2476,24 @@ static const struct drm_format_info ccs_formats[] = { .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, .has_alpha = true, }, }; +/* +* Gen-12 compression uses 4 bits of CCS data for each cache line pair in the +* main surface. And each 64B CCS cache line represents an area of 4x1 Y-tiles +* in the main surface. With 4 byte pixels and each Y-tile having dimensions of +* 32x32 pixels, the ratio turns out to 1B in the CCS for every 2x32 pixels in +* the main surface. +*/ +static const struct drm_format_info gen12_ccs_formats[] = { + { .format =DRM_FORMAT_XRGB8888 , .depth =24 , .num_planes =2 , + .cpp = {4 ,1 , }, .hsub =2 , .vsub =32 , }, + { .format =DRM_FORMAT_XBGR8888 , .depth =24 , .num_planes =2 , + .cpp = {4 ,1 , }, .hsub =2 , .vsub =32 , }, + { .format =DRM_FORMAT_ARGB8888 , .depth =32 , .num_planes =2 , + .cpp = {4 ,1 , }, .hsub =2 , .vsub =32 , .has_alpha = true }, + { .format =DRM_FORMAT_ABGR8888 , .depth =32 , .num_planes =2 , + .cpp = {4 ,1 , }, .hsub =2 , .vsub =32 , .has_alpha = true }, +}; +static const struct drm_format_info *lookup_format_info (const struct drm_format_info formats[],int num_formats,u32 format)
@@ -2481,8 +2514,12 @@ intel_get_format_info(const struct drm_mode_fb_cmd2 *cmd)switch (cmd->modifier[0 ]) {case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Yf_TILED_CCS: -return lookup_format_info (ccs_formats, -ARRAY_SIZE (ccs_formats), +return lookup_format_info (skl_ccs_formats, +ARRAY_SIZE (skl_ccs_formats), + cmd->pixel_format); +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +return lookup_format_info (gen12_ccs_formats, +ARRAY_SIZE (gen12_ccs_formats), cmd->pixel_format);default :return NULL ;
@@ -2491,7 +2528,8 @@ intel_get_format_info(const struct drm_mode_fb_cmd2 *cmd)bool is_ccs_modifier (u64 modifier) { -return modifier ==I915_FORMAT_MOD_Y_TILED_CCS || +return modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS || + modifier ==I915_FORMAT_MOD_Y_TILED_CCS || modifier == I915_FORMAT_MOD_Yf_TILED_CCS; }
@@ -2536,8 +2574,9 @@ static u32 intel_fb_stride_alignment(const struct drm_framebuffer *fb, int color_plane) {struct drm_i915_private *dev_priv =to_i915 (fb->dev); +u32 tile_width; -if (fb->modifier ==DRM_FORMAT_MOD_LINEAR ) { +if (is_surface_linear (fb->modifier, color_plane)) {u32 max_stride =intel_plane_fb_max_stride (dev_priv, fb->format->format, fb->modifier);
@@ -2546,13 +2585,14 @@ intel_fb_stride_alignment(const struct drm_framebuffer *fb, int color_plane)* To make remapping with linear generally feasible * we need the stride to be page aligned. */ -if (fb->pitches[color_plane] > max_stride) +if (fb->pitches[color_plane] > max_stride && !is_ccs_modifier (fb->modifier))return intel_tile_size (dev_priv);else return 64 ; - }else { -u32 tile_width =intel_tile_width_bytes (fb, color_plane); + } + tile_width =intel_tile_width_bytes (fb, color_plane); +if (is_ccs_modifier (fb->modifier) && color_plane ==0 ) {/* * Display WA #0531: skl,bxt,kbl,glk *
@@ -2562,12 +2602,16 @@ intel_fb_stride_alignment(const struct drm_framebuffer *fb, int color_plane)* require the entire fb to accommodate that to avoid * potential runtime errors at plane configuration time. */ -if (IS_GEN (dev_priv,9 ) &&is_ccs_modifier (fb->modifier) && - color_plane ==0 && fb->width >3840 ) +if (IS_GEN (dev_priv,9 ) && fb->width >3840 ) + tile_width *=4 ; +/* +* The main surface pitch must be padded to a multiple of four +* tile widths. +*/ +else if (INTEL_GEN (dev_priv) >=12 ) tile_width *=4 ; - -return tile_width; } +return tile_width; }bool intel_plane_can_remap (const struct intel_plane_state *plane_state)
@@ -2676,6 +2720,7 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv,int ccs_x, ccs_y;intel_tile_dims (fb, i, &tile_width, &tile_height); + tile_width *= hsub; tile_height *= vsub;
@@ -3972,7 +4017,7 @@ static unsigned int skl_plane_stride_mult(const struct drm_framebuffer *fb,* The stride is either expressed as a multiple of 64 bytes chunks for * linear buffers or in number of tiles for tiled buffers. */ -if (fb->modifier ==DRM_FORMAT_MOD_LINEAR ) +if (is_surface_linear (fb->modifier, color_plane))return 64 ;else if (drm_rotation_90_or_270 (rotation))return intel_tile_height (fb, color_plane);
@@ -4098,6 +4143,10 @@ static u32 skl_plane_ctl_tiling(u64 fb_modifier)return PLANE_CTL_TILED_Y ;case I915_FORMAT_MOD_Y_TILED_CCS :return PLANE_CTL_TILED_Y |PLANE_CTL_RENDER_DECOMPRESSION_ENABLE ; +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +return PLANE_CTL_TILED_Y | +PLANE_CTL_RENDER_DECOMPRESSION_ENABLE | +PLANE_CTL_CLEAR_COLOR_DISABLE ;case I915_FORMAT_MOD_Yf_TILED:return PLANE_CTL_TILED_YF ;case I915_FORMAT_MOD_Yf_TILED_CCS:
@@ -9899,7 +9948,9 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc,case PLANE_CTL_TILED_Y : plane_config->tiling =I915_TILING_Y ;if (val &PLANE_CTL_RENDER_DECOMPRESSION_ENABLE ) - fb->modifier =I915_FORMAT_MOD_Y_TILED_CCS ; + fb->modifier =INTEL_GEN (dev_priv) >=12 ? +I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +I915_FORMAT_MOD_Y_TILED_CCS ;else fb->modifier =I915_FORMAT_MOD_Y_TILED ;break ;
drivers/gpu/drm/i915/display/intel_sprite.c +15 -8
@@ -535,6 +535,7 @@ skl_program_plane(struct intel_plane *plane,const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;u32 surf_addr = plane_state->color_plane[color_plane].offset;u32 stride =skl_plane_stride (plane_state, color_plane); +u32 aux_dist = plane_state->color_plane[1 ].offset - surf_addr;u32 aux_stride =skl_plane_stride (plane_state,1 );int crtc_x = plane_state->base.dst.x1;int crtc_y = plane_state->base.dst.y1;
@@ -576,8 +577,10 @@ skl_program_plane(struct intel_plane *plane,I915_WRITE_FW (PLANE_STRIDE (pipe, plane_id), stride);I915_WRITE_FW (PLANE_POS (pipe, plane_id), (crtc_y <<16 ) | crtc_x);I915_WRITE_FW (PLANE_SIZE (pipe, plane_id), (src_h <<16 ) | src_w); -I915_WRITE_FW (PLANE_AUX_DIST (pipe, plane_id), - (plane_state->color_plane[1 ].offset - surf_addr) | aux_stride); + +if (INTEL_GEN (dev_priv) <12 ) + aux_dist |= aux_stride; +I915_WRITE_FW (PLANE_AUX_DIST (pipe, plane_id), aux_dist);if (icl_is_hdr_plane (dev_priv, plane_id)) {u32 cus_ctl =0 ;
@@ -1733,7 +1736,8 @@ static int skl_plane_check_fb(const struct intel_crtc_state *crtc_state, (fb->modifier == I915_FORMAT_MOD_Y_TILED || fb->modifier == I915_FORMAT_MOD_Yf_TILED || fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS || - fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS)) { + fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS || + fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS)) {DRM_DEBUG_KMS ("Y/Yf tiling not supported in IF-ID mode\n" );return -EINVAL ; }
@@ -2145,7 +2149,8 @@ static const u64 skl_plane_format_modifiers_ccs[] = {DRM_FORMAT_MOD_INVALID }; -static const u64 gen12_plane_format_modifiers_noccs[] = { +static const u64 gen12_plane_format_modifiers_ccs[] = { +I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS ,I915_FORMAT_MOD_Y_TILED ,I915_FORMAT_MOD_X_TILED ,DRM_FORMAT_MOD_LINEAR ,
@@ -2307,6 +2312,7 @@ static bool gen12_plane_format_mod_supported(struct drm_plane *_plane,case DRM_FORMAT_MOD_LINEAR :case I915_FORMAT_MOD_X_TILED :case I915_FORMAT_MOD_Y_TILED : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS :break ;default :return false;
@@ -2317,6 +2323,9 @@ static bool gen12_plane_format_mod_supported(struct drm_plane *_plane,case DRM_FORMAT_XBGR8888 :case DRM_FORMAT_ARGB8888 :case DRM_FORMAT_ABGR8888 : +if (is_ccs_modifier (modifier)) +return true; +/* fall through */ case DRM_FORMAT_RGB565 :case DRM_FORMAT_XRGB2101010 :case DRM_FORMAT_XBGR2101010 :
@@ -2525,13 +2534,11 @@ skl_universal_plane_create(struct drm_i915_private *dev_priv, formats =skl_get_plane_formats (dev_priv, pipe, plane_id, &num_formats); + plane->has_ccs =skl_plane_has_ccs (dev_priv, pipe, plane_id);if (INTEL_GEN (dev_priv) >=12 ) { -/* TODO: Implement support for gen-12 CCS modifiers */ - plane->has_ccs = false; - modifiers = gen12_plane_format_modifiers_noccs; + modifiers = gen12_plane_format_modifiers_ccs; plane_funcs = &gen12_plane_funcs; }else { - plane->has_ccs =skl_plane_has_ccs (dev_priv, pipe, plane_id);if (plane->has_ccs) modifiers = skl_plane_format_modifiers_ccs;else
drivers/gpu/drm/i915/i915_reg.h +1 -0
@@ -6688,6 +6688,7 @@ enum {#define PLANE_CTL_YUV422_VYUY (3 << 16)#define PLANE_CTL_RENDER_DECOMPRESSION_ENABLE (1 << 15)#define PLANE_CTL_TRICKLE_FEED_DISABLE (1 << 14) +#define PLANE_CTL_CLEAR_COLOR_DISABLE (1 << 13)/* TGL+ */ #define PLANE_CTL_PLANE_GAMMA_DISABLE (1 << 13)/* Pre-GLK */ #define PLANE_CTL_TILED_MASK (0x7 << 10)#define PLANE_CTL_TILED_LINEAR (0 << 10)
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 5/11 drm/i915: Extract framebufer CCS offset checks into a function
In reply to Radhakrishna SripadaFrom: Dhinakaran Pandiyan <[email protected]>
intel_fill_fb_info() has grown quite large and wrapping the offset checks into a separate function makes the loop a bit easier to follow.
--- drivers/gpu/drm/i915/display/intel_display.c | 69 ++++++++++++-------- 1 file changed, 40 insertions(+), 29 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +40 -29
@@ -2682,6 +2682,43 @@ static bool intel_plane_needs_remap(const struct intel_plane_state *plane_state)return stride > max_stride; } +static int +intel_fb_check_ccs_xy (struct drm_framebuffer *fb,int x,int y) +{ +struct intel_framebuffer *intel_fb =to_intel_framebuffer (fb); +int hsub = fb->format->hsub; +int vsub = fb->format->vsub; +int tile_width, tile_height; +int ccs_x, ccs_y; +int main_x, main_y; + +intel_tile_dims (fb,1 , &tile_width, &tile_height); + + tile_width *= hsub; + tile_height *= vsub; + + ccs_x = (x * hsub) % tile_width; + ccs_y = (y * vsub) % tile_height; + main_x = intel_fb->normal[0 ].x % tile_width; + main_y = intel_fb->normal[0 ].y % tile_height; + +/* +* CCS doesn't have its own x/y offset register, so the intra CCS tile +* x/y offsets must match between CCS and the main surface. +*/ +if (main_x != ccs_x || main_y != ccs_y) { +DRM_DEBUG_KMS ("Bad CCS x/y (main %d,%d ccs %d,%d) full (main %d,%d ccs %d,%d)\n" , + main_x, main_y, + ccs_x, ccs_y, + intel_fb->normal[0 ].x, + intel_fb->normal[0 ].y, + x, y); +return -EINVAL ; + } + +return 0 ; +} +static int intel_fill_fb_info (struct drm_i915_private *dev_priv,struct drm_framebuffer *fb)
@@ -2713,35 +2750,9 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv, }if (is_ccs_modifier (fb->modifier) && i ==1 ) { -int hsub = fb->format->hsub; -int vsub = fb->format->vsub; -int tile_width, tile_height; -int main_x, main_y; -int ccs_x, ccs_y; - -intel_tile_dims (fb, i, &tile_width, &tile_height); - - tile_width *= hsub; - tile_height *= vsub; - - ccs_x = (x * hsub) % tile_width; - ccs_y = (y * vsub) % tile_height; - main_x = intel_fb->normal[0 ].x % tile_width; - main_y = intel_fb->normal[0 ].y % tile_height; - -/* -* CCS doesn't have its own x/y offset register, so the intra CCS tile -* x/y offsets must match between CCS and the main surface. -*/ -if (main_x != ccs_x || main_y != ccs_y) { -DRM_DEBUG_KMS ("Bad CCS x/y (main %d,%d ccs %d,%d) full (main %d,%d ccs %d,%d)\n" , - main_x, main_y, - ccs_x, ccs_y, - intel_fb->normal[0 ].x, - intel_fb->normal[0 ].y, - x, y); -return -EINVAL ; - } + ret =intel_fb_check_ccs_xy (fb, x, y); +if (ret) +return ret; }/*
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 6/11 drm/framebuffer: Format modifier for Intel Gen-12 media compression
In reply to Radhakrishna SripadaFrom: Dhinakaran Pandiyan <[email protected]>
Gen-12 display can decompress surfaces compressed by the media engine, add a new modifier as the driver needs to know the surface was compressed by the media or render engine.
--- include/uapi/drm/drm_fourcc.h | 13 +++++++++++++ 1 file changed, 13 insertions(+)
include/uapi/drm/drm_fourcc.h +13 -0
@@ -421,6 +421,19 @@ extern "C" {*/ #define I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS fourcc_mod_code(INTEL, 6) +/* +* Intel color control surfaces (CCS) for Gen-12 media compression +* +* The main surface is Y-tiled and at plane index 0, the CCS is linear and +* at index 1. A 64B CCS cache line corresponds to an area of 4x1 tiles in +* main surface. In other words, 4 bits in CCS map to a main surface cache +* line pair. The main surface pitch is required to be a multiple of four +* Y-tile widths. For semi-planar formats like NV12, CCS plane follows the +* Y and UV planes i.e., planes 0 and 2 are used for Y and UV surfaces, +* planes 1 and 3 for the respective CCS. +*/ +#define I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS fourcc_mod_code(INTEL, 7) +/* * Tiled, NV12MT, grouped in 64 (pixels) x 32 (lines) -sized macroblocks *
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 7/11 drm/i915: Skip rotated offset adjustment for unsupported modifiers
In reply to Radhakrishna SripadaFrom: Dhinakaran Pandiyan <[email protected]>
During framebuffer creation, we pre-compute offsets for 90/270 plane rotation. However, only Y and Yf modifiers support 90/270 rotation. So, skip the calculations for other modifiers.
--- drivers/gpu/drm/i915/display/intel_display.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display.c +3 -1
@@ -2784,7 +2784,9 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv, tile_size); offset /= tile_size; -if (!is_surface_linear (fb->modifier, i)) { +/* Y or Yf modifiers required for 90/270 rotation */ +if (fb->modifier ==I915_FORMAT_MOD_Y_TILED || + fb->modifier == I915_FORMAT_MOD_Yf_TILED) {unsigned int tile_width, tile_height;unsigned int pitch_tiles;struct drm_rect r;
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 8/11 drm/fb: Extend format_info member arrays to handle four planes
In reply to Radhakrishna SripadaFrom: Dhinakaran Pandiyan <[email protected]>
addfb() uAPI has supported four planes for a while now, make format_info compatible with that.
--- include/drm/drm_fourcc.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
include/drm/drm_fourcc.h +4 -4
@@ -78,7 +78,7 @@ struct drm_format_info {* triplet @char_per_block, @block_w, @block_h for better * describing the pixel format. */ -u8 cpp[3 ]; +u8 cpp[4 ];/** * @char_per_block:
@@ -104,7 +104,7 @@ struct drm_format_info {* information from their drm_mode_config.get_format_info hook * if they want the core to be validating the pitch. */ -u8 char_per_block[3 ]; +u8 char_per_block[4 ]; };/**
@@ -113,7 +113,7 @@ struct drm_format_info {* Block width in pixels, this is intended to be accessed through * drm_format_info_block_width() */ -u8 block_w[3 ]; +u8 block_w[4 ];/** * @block_h:
@@ -121,7 +121,7 @@ struct drm_format_info {* Block height in pixels, this is intended to be accessed through * drm_format_info_block_height() */ -u8 block_h[3 ]; +u8 block_h[4 ];/** @hsub: Horizontal chroma subsampling factor */ u8 hsub;
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 9/11 Gen-12 display can decompress surfaces compressed by the media engine.
In reply to Radhakrishna SripadaFrom: Dhinakaran Pandiyan <[email protected]>
Detect the modifier corresponding to media compression to enable display decompression for YUV and xRGB packed formats. A new modifier is added so that the driver can distinguish between media and render compressed buffers. Unlike render decompression, plane 6 and plane 7 do not support media decompression.
v2: Fix checkpatch warnings on code style (Lucas)
From DK:
Separate modifier array for planes that cannot decompress media (Ville)
v3: Support planar formats
--- drivers/gpu/drm/i915/display/intel_display.c | 237 +++++++++++++----- .../drm/i915/display/intel_display_types.h | 2 +- drivers/gpu/drm/i915/display/intel_sprite.c | 44 +++- drivers/gpu/drm/i915/i915_reg.h | 1 + 4 files changed, 220 insertions(+), 64 deletions(-)
drivers/gpu/drm/i915/display/intel_display.c +180 -57
@@ -1911,6 +1911,10 @@ intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)if (color_plane ==1 )return 128 ;/* fall through */ +case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS : +if (color_plane ==3 ) +return 64 ; +/* fall through */ case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS :if (color_plane ==1 )return 64 ;
@@ -2256,8 +2260,16 @@ static u32 intel_adjust_tile_offset(int *x, int *y,static bool is_surface_linear (u64 modifier,int color_plane) { -return modifier ==DRM_FORMAT_MOD_LINEAR || - (modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS && color_plane ==1 ); +switch (modifier) { +case DRM_FORMAT_MOD_LINEAR : +return true; +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +return color_plane ==1 ; +case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS : +return color_plane ==1 || color_plane ==3 ; +default : +return false; + } } static u32 intel_adjust_aligned_offset(int *x, int *y,
@@ -2445,6 +2457,7 @@ static unsigned int intel_fb_modifier_to_tiling(u64 fb_modifier)case I915_FORMAT_MOD_Y_TILED :case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS :return I915_TILING_Y ;default :return I915_TILING_NONE ;
@@ -2492,6 +2505,10 @@ static const struct drm_format_info gen12_ccs_formats[] = { .cpp = { 4, 1, }, .hsub = 2, .vsub = 32, .has_alpha = true }, { .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 2, .cpp = { 4, 1, }, .hsub = 2, .vsub = 32, .has_alpha = true }, + { .format = DRM_FORMAT_YUYV, .num_planes = 2, + .cpp = { 2, 1, }, .hsub = 4, .vsub = 32, .is_yuv = true }, + { .format = DRM_FORMAT_NV12, .num_planes = 4, + .cpp = { 1, 1, 2, 1}, .hsub = 2, .vsub = 2, .is_yuv = true }, }; static const struct drm_format_info *
@@ -2529,6 +2546,7 @@ intel_get_format_info(const struct drm_mode_fb_cmd2 *cmd)bool is_ccs_modifier (u64 modifier) {return modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS || + modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS || modifier ==I915_FORMAT_MOD_Y_TILED_CCS || modifier == I915_FORMAT_MOD_Yf_TILED_CCS; }
@@ -2592,7 +2610,7 @@ intel_fb_stride_alignment(const struct drm_framebuffer *fb, int color_plane) } tile_width =intel_tile_width_bytes (fb, color_plane); -if (is_ccs_modifier (fb->modifier) && color_plane ==0 ) { +if (is_ccs_modifier (fb->modifier)) {/* * Display WA #0531: skl,bxt,kbl,glk *
@@ -2602,7 +2620,7 @@ intel_fb_stride_alignment(const struct drm_framebuffer *fb, int color_plane)* require the entire fb to accommodate that to avoid * potential runtime errors at plane configuration time. */ -if (IS_GEN (dev_priv,9 ) && fb->width >3840 ) +if (IS_GEN (dev_priv,9 ) && color_plane ==0 && fb->width >3840 ) tile_width *=4 ;/* * The main surface pitch must be padded to a multiple of four
@@ -2682,25 +2700,71 @@ static bool intel_plane_needs_remap(const struct intel_plane_state *plane_state)return stride > max_stride; } +static void +intel_fb_plane_get_subsampling (int *hsub,int *vsub,const struct drm_framebuffer *fb,int color_plane) +{ +if (fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS ) { +static const struct { +int cpp[4 ]; +int vsub[4 ]; +int hsub[4 ]; + } mc_ccs_subsampling = {.cpp = {1 ,1 ,2 ,1 }, .hsub = {1 ,8 ,2 ,16 }, .vsub = {1 ,32 ,2 ,32 } }; + + *hsub = mc_ccs_subsampling.hsub[color_plane]; + *vsub = mc_ccs_subsampling.vsub[color_plane]; + }else { + *hsub = fb->format->hsub; + *vsub = fb->format->vsub; + } +} + +static void +intel_fb_plane_dims (int *w,int *h,struct drm_framebuffer *fb,int color_plane) +{ +int hsub, vsub; + +intel_fb_plane_get_subsampling (&hsub, &vsub, fb, color_plane); + *w = fb->width / hsub; + *h = fb->height / vsub; +} + +static bool is_ccs_plane (u64 modifier,int color_plane) +{ +if (!is_ccs_modifier (modifier)) +return false; +else if (modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS ) +return color_plane ==3 || color_plane ==1 ; +else +return color_plane ==1 ; +} +static int -intel_fb_check_ccs_xy (struct drm_framebuffer *fb,int x,int y) +intel_fb_check_ccs_xy (struct drm_framebuffer *fb,int color_plane,int x,int y) {struct intel_framebuffer *intel_fb =to_intel_framebuffer (fb); -int hsub = fb->format->hsub; -int vsub = fb->format->vsub; +int hsub, vsub; +int hsub_main, vsub_main;int tile_width, tile_height;int ccs_x, ccs_y;int main_x, main_y; -intel_tile_dims (fb,1 , &tile_width, &tile_height); +if (!is_ccs_plane (fb->modifier, color_plane)) +return 0 ; + +intel_tile_dims (fb, color_plane, &tile_width, &tile_height); +intel_fb_plane_get_subsampling (&hsub, &vsub, fb, color_plane); +intel_fb_plane_get_subsampling (&hsub_main, &vsub_main, fb, color_plane -1 ); + + hsub /= hsub_main; + vsub /= vsub_main; tile_width *= hsub; tile_height *= vsub; ccs_x = (x * hsub) % tile_width; ccs_y = (y * vsub) % tile_height; - main_x = intel_fb->normal[0 ].x % tile_width; - main_y = intel_fb->normal[0 ].y % tile_height; + main_x = intel_fb->normal[color_plane -1 ].x % tile_width; + main_y = intel_fb->normal[color_plane -1 ].y % tile_height;/* * CCS doesn't have its own x/y offset register, so the intra CCS tile
@@ -2710,8 +2774,8 @@ intel_fb_check_ccs_xy(struct drm_framebuffer *fb, int x, int y)DRM_DEBUG_KMS ("Bad CCS x/y (main %d,%d ccs %d,%d) full (main %d,%d ccs %d,%d)\n" , main_x, main_y, ccs_x, ccs_y, - intel_fb->normal[0 ].x, - intel_fb->normal[0 ].y, + intel_fb->normal[color_plane -1 ].x, + intel_fb->normal[color_plane -1 ].y, x, y);return -EINVAL ; }
@@ -2739,8 +2803,7 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv,int ret; cpp = fb->format->cpp[i]; - width =drm_framebuffer_plane_width (fb->width, fb, i); - height =drm_framebuffer_plane_height (fb->height, fb, i); +intel_fb_plane_dims (&width, &height, fb, i); ret =intel_fb_offset_to_xy (&x, &y, fb, i);if (ret) {
@@ -2749,11 +2812,9 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv,return ret; } -if (is_ccs_modifier (fb->modifier) && i ==1 ) { - ret =intel_fb_check_ccs_xy (fb, x, y); -if (ret) -return ret; - } + ret =intel_fb_check_ccs_xy (fb, i, x, y); +if (ret) +return ret;/* * The fence (if used) is aligned to the start of the object
@@ -3371,6 +3432,7 @@ static int skl_max_plane_width(const struct drm_framebuffer *fb,return 5120 ;case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Yf_TILED_CCS: +case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS :/* FIXME AUX plane? */ case I915_FORMAT_MOD_Y_TILED :case I915_FORMAT_MOD_Yf_TILED:
@@ -3430,16 +3492,18 @@ static int icl_max_plane_height(void) }static bool skl_check_main_ccs_coordinates (struct intel_plane_state *plane_state, -int main_x,int main_y,u32 main_offset) +int main_x,int main_y,u32 main_offset, +int aux_plane) {const struct drm_framebuffer *fb = plane_state->base.fb; -int hsub = fb->format->hsub; -int vsub = fb->format->vsub; -int aux_x = plane_state->color_plane[1 ].x; -int aux_y = plane_state->color_plane[1 ].y; -u32 aux_offset = plane_state->color_plane[1 ].offset; -u32 alignment =intel_surf_alignment (fb,1 ); - +int hsub; +int vsub; +int aux_x = plane_state->color_plane[aux_plane].x; +int aux_y = plane_state->color_plane[aux_plane].y; +u32 aux_offset = plane_state->color_plane[aux_plane].offset; +u32 alignment =intel_surf_alignment (fb, aux_plane); + +intel_fb_plane_get_subsampling (&hsub, &vsub, fb, aux_plane);while (aux_offset >= main_offset && aux_y <= main_y) {int x, y;
@@ -3451,7 +3515,7 @@ static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state x = aux_x / hsub; y = aux_y / vsub; - aux_offset =intel_plane_adjust_aligned_offset (&x, &y, plane_state,1 , + aux_offset =intel_plane_adjust_aligned_offset (&x, &y, plane_state, aux_plane, aux_offset, aux_offset - alignment); aux_x = x * hsub + aux_x % hsub; aux_y = y * vsub + aux_y % vsub;
@@ -3460,9 +3524,9 @@ static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_stateif (aux_x != main_x || aux_y != main_y)return false; - plane_state->color_plane[1 ].offset = aux_offset; - plane_state->color_plane[1 ].x = aux_x; - plane_state->color_plane[1 ].y = aux_y; + plane_state->color_plane[aux_plane].offset = aux_offset; + plane_state->color_plane[aux_plane].x = aux_x; + plane_state->color_plane[aux_plane].y = aux_y;return true; }
@@ -3536,7 +3600,7 @@ static int skl_check_main_surface(struct intel_plane_state *plane_state)* they match with the main surface x/y offsets. */ if (is_ccs_modifier (fb->modifier)) { -while (!skl_check_main_ccs_coordinates (plane_state, x, y, offset)) { +while (!skl_check_main_ccs_coordinates (plane_state, x, y, offset,1 )) {if (offset ==0 )break ;
@@ -3569,7 +3633,8 @@ static int skl_check_nv12_aux_surface(struct intel_plane_state *plane_state) {const struct drm_framebuffer *fb = plane_state->base.fb;unsigned int rotation = plane_state->base.rotation; -int max_width =skl_max_plane_width (fb,1 , rotation); +int uv =is_ccs_modifier (fb->modifier) ?2 :1 ; +int max_width =skl_max_plane_width (fb, uv, rotation);int max_height =4096 ;int x = plane_state->base.src.x1 >>17 ;int y = plane_state->base.src.y1 >>17 ;
@@ -3577,8 +3642,8 @@ static int skl_check_nv12_aux_surface(struct intel_plane_state *plane_state)int h =drm_rect_height (&plane_state->base.src) >>17 ;u32 offset; -intel_add_fb_offsets (&x, &y, plane_state,1 ); - offset =intel_plane_compute_aligned_offset (&x, &y, plane_state,1 ); +intel_add_fb_offsets (&x, &y, plane_state, uv); + offset =intel_plane_compute_aligned_offset (&x, &y, plane_state, uv);/* FIXME not quite sure how/if these apply to the chroma plane */ if (w > max_width || h > max_height) {
@@ -3587,9 +3652,41 @@ static int skl_check_nv12_aux_surface(struct intel_plane_state *plane_state)return -EINVAL ; } - plane_state->color_plane[1 ].offset = offset; - plane_state->color_plane[1 ].x = x; - plane_state->color_plane[1 ].y = y; +if (is_ccs_modifier (fb->modifier)) { +int aux_offset = plane_state->color_plane[3 ].offset; +int alignment =intel_surf_alignment (fb, uv); + +if (offset > aux_offset) { +int hsub, vsub; +int main_x = x, main_y = y; + +intel_fb_plane_get_subsampling (&hsub, &vsub, fb, uv); + x = main_x / hsub; + y = main_y / vsub; + offset =intel_plane_adjust_aligned_offset (&x, &y, plane_state, uv, + offset, + aux_offset & ~(alignment -1 )); + x = x * hsub + main_x % hsub; + y = y * vsub + main_y % vsub; + } + +while (!skl_check_main_ccs_coordinates (plane_state, x, y, offset,3 )) { +if (offset ==0 ) +break ; + + offset =intel_plane_adjust_aligned_offset (&x, &y, plane_state, uv, + offset, offset - alignment); + } + +if (x != plane_state->color_plane[3 ].x || y != plane_state->color_plane[3 ].y) { +DRM_DEBUG_KMS ("Unable to find suitable display surface offset due to CCS\n" ); +return -EINVAL ; + } + } + + plane_state->color_plane[uv].offset = offset; + plane_state->color_plane[uv].x = x; + plane_state->color_plane[uv].y = y;return 0 ; }
@@ -3599,19 +3696,30 @@ static int skl_check_ccs_aux_surface(struct intel_plane_state *plane_state)const struct drm_framebuffer *fb = plane_state->base.fb;int src_x = plane_state->base.src.x1 >>16 ;int src_y = plane_state->base.src.y1 >>16 ; -int hsub = fb->format->hsub; -int vsub = fb->format->vsub; -int x = src_x / hsub; -int y = src_y / vsub;u32 offset; +int ccs; -intel_add_fb_offsets (&x, &y, plane_state,1 ); - offset =intel_plane_compute_aligned_offset (&x, &y, plane_state,1 ); - plane_state->color_plane[1 ].offset = offset; - plane_state->color_plane[1 ].x = x * hsub + src_x % hsub; - plane_state->color_plane[1 ].y = y * vsub + src_y % vsub; +for (ccs =1 ; ccs < fb->format->num_planes; ccs +=2 ) { +int hsub, vsub; +int main_hsub, main_vsub; +int x, y; + +intel_fb_plane_get_subsampling (&hsub, &vsub, fb, ccs); +intel_fb_plane_get_subsampling (&main_hsub, &main_vsub, fb, ccs -1 ); + hsub /= main_hsub; + vsub /= main_vsub; + x = src_x / hsub; + y = src_y / vsub; + +intel_add_fb_offsets (&x, &y, plane_state, ccs); + offset =intel_plane_compute_aligned_offset (&x, &y, + plane_state, ccs); + plane_state->color_plane[ccs].offset = offset; + plane_state->color_plane[ccs].x = x * hsub + src_x % hsub; + plane_state->color_plane[ccs].y = y * vsub + src_y % vsub; + }return 0 ; }
@@ -3619,6 +3727,7 @@ int skl_check_plane_surface(struct intel_plane_state *plane_state) {const struct drm_framebuffer *fb = plane_state->base.fb;int ret; +bool needs_aux = false; ret =intel_plane_compute_gtt (plane_state);if (ret)
@@ -3628,21 +3737,31 @@ int skl_check_plane_surface(struct intel_plane_state *plane_state)return 0 ;/* -* Handle the AUX surface first since -* the main surface setup depends on it. +* Handle the AUX surface first since the main surface setup depends on +* it. */ -if (drm_format_info_is_yuv_semiplanar (fb->format)) { - ret =skl_check_nv12_aux_surface (plane_state); +if (is_ccs_modifier (fb->modifier)) { + needs_aux = true; + ret =skl_check_ccs_aux_surface (plane_state);if (ret)return ret; - }else if (is_ccs_modifier (fb->modifier)) { - ret =skl_check_ccs_aux_surface (plane_state); + } + +if (drm_format_info_is_yuv_semiplanar (fb->format)) { + needs_aux = true; + ret =skl_check_nv12_aux_surface (plane_state);if (ret)return ret; - }else { - plane_state->color_plane[1 ].offset = ~0xfff ; - plane_state->color_plane[1 ].x =0 ; - plane_state->color_plane[1 ].y =0 ; + } + +if (!needs_aux) { +int i; + +for (i =1 ; i < fb->format->num_planes; i++) { + plane_state->color_plane[i].offset = ~0xfff ; + plane_state->color_plane[i].x =0 ; + plane_state->color_plane[i].y =0 ; + } } ret =skl_check_main_surface (plane_state);
@@ -4160,6 +4279,8 @@ static u32 skl_plane_ctl_tiling(u64 fb_modifier)return PLANE_CTL_TILED_Y |PLANE_CTL_RENDER_DECOMPRESSION_ENABLE |PLANE_CTL_CLEAR_COLOR_DISABLE ; +case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS : +return PLANE_CTL_TILED_Y |PLANE_CTL_MEDIA_DECOMPRESSION_ENABLE ;case I915_FORMAT_MOD_Yf_TILED:return PLANE_CTL_TILED_YF ;case I915_FORMAT_MOD_Yf_TILED_CCS:
@@ -9964,6 +10085,8 @@ skylake_get_initial_plane_config(struct intel_crtc *crtc, fb->modifier =INTEL_GEN (dev_priv) >=12 ?I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS :I915_FORMAT_MOD_Y_TILED_CCS ; + else if (val & PLANE_CTL_MEDIA_DECOMPRESSION_ENABLE) + fb->modifier = I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS; else fb->modifier = I915_FORMAT_MOD_Y_TILED;break ;
drivers/gpu/drm/i915/display/intel_display_types.h +1 -1
@@ -530,7 +530,7 @@ struct intel_plane_state {*/ u32 stride;int x, y; - } color_plane[2 ]; + } color_plane[4 ];/* plane control register */ u32 ctl;
drivers/gpu/drm/i915/display/intel_sprite.c +38 -6
89 lines not on this page · raw message
drivers/gpu/drm/i915/i915_reg.h +1 -0
@@ -6696,6 +6696,7 @@ enum {#define PLANE_CTL_TILED_Y (4 << 10)#define PLANE_CTL_TILED_YF (5 << 10)#define PLANE_CTL_FLIP_HORIZONTAL (1 << 8) +#define PLANE_CTL_MEDIA_DECOMPRESSION_ENABLE (1 << 4)/* TGL+ */ #define PLANE_CTL_ALPHA_MASK (0x3 << 4)/* Pre-GLK */ #define PLANE_CTL_ALPHA_DISABLE (0 << 4)#define PLANE_CTL_ALPHA_SW_PREMULTIPLY (2 << 4)
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 10/11 drm/framebuffer/tgl: Format modifier for Intel Gen 12 render compression with Clear Color
In reply to Radhakrishna SripadaGen12 display can decompress surfaces compressed by render engine with Clear Color, add a new modifier as the driver needs to know the surface was compressed by render engine.
V2: Description changes as suggested by Rafael.
--- include/uapi/drm/drm_fourcc.h | 11 +++++++++++ 1 file changed, 11 insertions(+)
include/uapi/drm/drm_fourcc.h +11 -0
@@ -434,6 +434,17 @@ extern "C" {*/ #define I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS fourcc_mod_code(INTEL, 7) +/* +* Intel color control surfaces Clear Color(CCS_CC) for Gen-12 render compression. +* +* The main surface is Y-tiled and is at plane index 0 whereas CCS_CC is linear +* and at index 1. The clear color is stored at index 2, and the pitch should +* be ignored. A CCS_CC cache line corresponds to an area of 4x1 tiles in the +* main surface. The main surface pitch is required to be a multiple of 4 tile +* widths. +*/ +#define I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC fourcc_mod_code(INTEL, 8) +/* * Tiled, NV12MT, grouped in 64 (pixels) x 32 (lines) -sized macroblocks *
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v2 10/11] drm/framebuffer/tgl: Format modifier for Intel Gen 12 render compression with Clear Color
Quoted 20 lines · Radhakrishna Sripada
Gen12 display can decompress surfaces compressed by render engine with Clear Color, add a new modifier as the driver needs to know the surface was compressed by render engine.
V2: Description changes as suggested by Rafael.
Cc Ville Syrjala <[email protected]>Cc Dhinakaran Pandiyan <[email protected]>Cc Kalyan Kondapally <[email protected]>Cc Rafael Antognolli <[email protected]>Cc Nanley Chery <[email protected]>Signed-off-by Radhakrishna Sripada <[email protected]>--- include/uapi/drm/drm_fourcc.h | 11 +++++++++++ 1 file changed, 11 insertions(+)include/uapi/drm/drm_fourcc.h +0
-0
include/uapi/drm/drm_fourcc.h extern "C" { · line 441
Quoted 8 lines
include/uapi/drm/drm_fourcc.h +5
-0@@ -434,6 +434,17 @@ extern "C" {*/ #define I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS fourcc_mod_code(INTEL, 7) +/* +* Intel color control surfaces Clear Color(CCS_CC) for Gen-12 render compression. +* +* The main surface is Y-tiled and is at plane index 0 whereas CCS_CC is linear +* and at index 1.
Clear color data is fixed size - 64b, that should be in the documentation here.
Quoted 2 lines
The clear color is stored at index 2, and the pitch should
+ * be ignored. ACCS_CCcache line corresponds to an area of 4x1 tiles in the
That's a CCS cache line, not a CCS_CC cache line, right?
include/uapi/drm/drm_fourcc.h extern "C" { · line 450
Quoted 8 lines
+ * main surface. The main surface pitch is required to be a multiple of 4 tile
+ * widths.
+ */include/uapi/drm/drm_fourcc.h +2
-0+#define I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC fourcc_mod_code(INTEL, 8) +/* * Tiled, NV12MT, grouped in 64 (pixels) x 32 (lines) -sized macroblocks *
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v2 10/11] drm/framebuffer/tgl: Format modifier for Intel Gen 12 render compression with Clear Color
HI,
Quoted 44 lines
-----Original Message-----
From: Pandiyan, Dhinakaran
Sent: Friday, October 4, 2019 5:08 PM
To: Sripada, Radhakrishna <[email protected]>; intel- [email protected]
Cc: Syrjala, Ville <[email protected]>; Sharma, Shashank <[email protected]>; Antognolli, Rafael <[email protected]>; Roper, Matthew D <[email protected]>; Chery, Nanley G <[email protected]>; Ville Syrjala <[email protected]>; Kondapally, Kalyan <[email protected]>
Subject: Re: [PATCH v2 10/11] drm/framebuffer/tgl: Format modifier for Intel Gen 12 render compression with Clear ColorQuoted 2 lines · Radhakrishna Sripada
Gen12 display can decompress surfaces compressed by render engine with Clear Color, add a new modifier as the driver needs to know the surface
was compressed by render engine.
Quoted 19 lines
V2: Description changes as suggested by Rafael.
Cc Ville Syrjala <[email protected]>Cc Dhinakaran Pandiyan <[email protected]>Cc Kalyan Kondapally <[email protected]>Cc Rafael Antognolli <[email protected]>Cc Nanley Chery <[email protected]>Signed-off-by Radhakrishna Sripada <[email protected]>--- include/uapi/drm/drm_fourcc.h | 11 +++++++++++ 1 file changed, 11 insertions(+)(quoted diff) +0
-0
b/include/uapi/drm/drm_fourcc.hindexc4a4e0fdbee5..99c61ee9b61f100644include/uapi/drm/drm_fourcc.h extern "C" { · line 435
Quoted 2 lines
include/uapi/drm/drm_fourcc.h +0
-0@@ -434,6 +434,17 @@ extern "C" {*/ #define I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS fourcc_mod_code(INTEL,
include/uapi/drm/drm_fourcc.h extern "C" {
Quoted 4 lines
include/uapi/drm/drm_fourcc.h +2
-07) +/* +* Intel color control surfaces Clear Color(CCS_CC) for Gen-12 render
Quoted 7 lines
compression.
include/uapi/drm/drm_fourcc.h extern "C" { · line 443
Quoted 4 lines
include/uapi/drm/drm_fourcc.h +4
-0+* +* The main surface is Y-tiled and is at plane index 0 whereas CCS_CC +is linear +* and at index 1. Clear color data is fixed size - 64b, that should be in the documentation here.
Sure will update the documentation in next rev.
Thanks,
Radhakrishna(RK) Sripada
Quoted 7 lines
Quoted 5 lines
The clear color is stored at index 2, and the pitch should
+ * be ignored. ACCS_CCcache line corresponds to an area of 4x1
+ tiles in theThat's a CCS cache line, not a
CCS_CCcache line, right?
Quoted 10 lines
include/uapi/drm/drm_fourcc.h extern "C" { · line 450
Quoted 10 lines
+ * main surface. The main surface pitch is required to be a multiple
include/uapi/drm/drm_fourcc.h +6
-0+of 4 tile +* widths. +*/ +#define I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC +fourcc_mod_code (INTEL ,8 ) +/* * Tiled, NV12MT, grouped in 64 (pixels) x 32 (lines) -sized macroblocks *
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v2 11/11 drm/i915/tgl: Add Clear Color supoort for TGL Render Decompression
In reply to Radhakrishna SripadaRender Decompression is supported with Y-Tiled main surface. The CCS is linear and has 4 bits of data for each main surface cache line pair, a ratio of 1:256. Additional Clear Color information is passed from the user-space through an offset in the GEM BO. Add a new modifier to identify and parse new Clear Color information and extend Gen12 render decompression functionality to the newly added modifier.
v2: Fix has_alpha flag for modifiers, omit CC modifier during initial
plane config(Matt). Fix Lookup error.
--- drivers/gpu/drm/i915/display/intel_display.c | 38 +++++++++++++++++++ .../drm/i915/display/intel_display_types.h | 3 ++ drivers/gpu/drm/i915/display/intel_sprite.c | 11 +++++- drivers/gpu/drm/i915/i915_reg.h | 12 ++++++ 4 files changed, 63 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display.c +38 -0
@@ -1916,6 +1916,7 @@ intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)return 64 ;/* fall through */ case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :if (color_plane ==1 )return 64 ;/* fall through */
@@ -2060,6 +2061,7 @@ static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,return 256 *1024 ;return 0 ;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return 16 *1024 ;case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Yf_TILED_CCS:
@@ -2264,6 +2266,7 @@ static bool is_surface_linear(u64 modifier, int color_plane)case DRM_FORMAT_MOD_LINEAR :return true;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return color_plane ==1 ;case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS :return color_plane ==1 || color_plane ==3 ;
@@ -2458,6 +2461,7 @@ static unsigned int intel_fb_modifier_to_tiling(u64 fb_modifier)case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS :case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return I915_TILING_Y ;default :return I915_TILING_NONE ;
@@ -2511,6 +2515,25 @@ static const struct drm_format_info gen12_ccs_formats[] = { .cpp = { 1, 1, 2, 1}, .hsub = 2, .vsub = 2, .is_yuv = true }, }; +/* +* Gen-12 compression uses 4 bits of CCS data for each cache line pair in the +* main surface. And each 64B CCS cache line represents an area of 4x1 Y-tiles +* in the main surface. With 4 byte pixels and each Y-tile having dimensions of +* 32x32 pixels, the ratio turns out to 1B in the CCS for every 2 x 32 pixels in +* the main surface. Additional surface is used to pass the Clear Color +* structure for the driver to program the DE. +*/ +static const struct drm_format_info gen12_ccs_cc_formats[] = { + { .format =DRM_FORMAT_XRGB8888 , .depth =24 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , }, + { .format =DRM_FORMAT_XBGR8888 , .depth =24 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , }, + { .format =DRM_FORMAT_ARGB8888 , .depth =32 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , .has_alpha = true }, + { .format =DRM_FORMAT_ABGR8888 , .depth =32 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , .has_alpha = true }, +}; +static const struct drm_format_info *lookup_format_info (const struct drm_format_info formats[],int num_formats,u32 format)
@@ -2538,6 +2561,10 @@ intel_get_format_info(const struct drm_mode_fb_cmd2 *cmd)return lookup_format_info (gen12_ccs_formats,ARRAY_SIZE (gen12_ccs_formats), cmd->pixel_format); +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : +return lookup_format_info (gen12_ccs_cc_formats, +ARRAY_SIZE (gen12_ccs_cc_formats), + cmd->pixel_format);default :return NULL ; }
@@ -2547,6 +2574,7 @@ bool is_ccs_modifier(u64 modifier) {return modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS || modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS || + modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC || modifier ==I915_FORMAT_MOD_Y_TILED_CCS || modifier == I915_FORMAT_MOD_Yf_TILED_CCS; }
@@ -4274,6 +4302,7 @@ static u32 skl_plane_ctl_tiling(u64 fb_modifier)case I915_FORMAT_MOD_Y_TILED :return PLANE_CTL_TILED_Y ;case I915_FORMAT_MOD_Y_TILED_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return PLANE_CTL_TILED_Y |PLANE_CTL_RENDER_DECOMPRESSION_ENABLE ;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : return PLANE_CTL_TILED_Y |
@@ -14539,6 +14568,15 @@ static int intel_plane_pin_fb(struct intel_plane_state *plane_state) plane_state->vma = vma; +if (fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ) { +u32 *ccaddr =kmap_atomic (i915_gem_object_get_page (intel_fb_obj (fb), + fb->offsets[2 ] >>PAGE_SHIFT )); + + plane_state->ccval = ((u64)*(ccaddr +CC_VAL_HIGHER_OFFSET ) <<32 ) + | *(ccaddr +CC_VAL_LOWER_OFFSET ); +kunmap_atomic (ccaddr); + } +return 0 ; }
drivers/gpu/drm/i915/display/intel_display_types.h +3 -0
@@ -579,6 +579,9 @@ struct intel_plane_state {u32 slave;struct drm_intel_sprite_colorkey ckey; + +/* Clear Color Value */ +u64 ccval; };struct intel_initial_plane_config {
drivers/gpu/drm/i915/display/intel_sprite.c +10 -1
@@ -549,6 +549,7 @@ skl_program_plane(struct intel_plane *plane,u32 plane_color_ctl =0 ;unsigned long irqflags;u32 keymsk, keymax; +u64 ccval = plane_state->ccval; plane_ctl |=skl_plane_ctl_crtc (crtc_state);
@@ -609,6 +610,10 @@ skl_program_plane(struct intel_plane *plane,if (fb->format->is_yuv &&icl_is_hdr_plane (dev_priv, plane_id))icl_program_input_csc (plane, crtc_state, plane_state); +if (fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ) +intel_uncore_write64_fw (&dev_priv->uncore, +PLANE_CC_VAL (pipe, plane_id), ccval); +skl_write_plane_wm (plane, crtc_state);I915_WRITE_FW (PLANE_KEYVAL (pipe, plane_id), key->min_value);
@@ -1738,7 +1743,8 @@ static int skl_plane_check_fb(const struct intel_crtc_state *crtc_state, fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS || fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS || fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS || - fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS)) { + fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS || + fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC)) {DRM_DEBUG_KMS ("Y/Yf tiling not supported in IF-ID mode\n" );return -EINVAL ; }
@@ -2153,6 +2159,7 @@ static const u64 skl_plane_format_modifiers_ccs[] = {static const u64 gen12_plane_format_modifiers_mc_ccs[] = {I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS ,I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS , +I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ,I915_FORMAT_MOD_Y_TILED ,I915_FORMAT_MOD_X_TILED ,DRM_FORMAT_MOD_LINEAR ,
@@ -2161,6 +2168,7 @@ static const u64 gen12_plane_format_modifiers_mc_ccs[] = {static const u64 gen12_plane_format_modifiers_rc_ccs[] = {I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS , +I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ,I915_FORMAT_MOD_Y_TILED ,I915_FORMAT_MOD_X_TILED ,DRM_FORMAT_MOD_LINEAR ,
@@ -2334,6 +2342,7 @@ static bool gen12_plane_format_mod_supported(struct drm_plane *_plane,case I915_FORMAT_MOD_X_TILED :case I915_FORMAT_MOD_Y_TILED :case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :break ;default :return false;
drivers/gpu/drm/i915/i915_reg.h +12 -0
@@ -6729,6 +6729,8 @@ enum {#define _PLANE_KEYMAX_1_A 0x701a0#define _PLANE_KEYMAX_2_A 0x702a0#define PLANE_KEYMAX_ALPHA (a) ((a) << 24) +#define _PLANE_CC_VAL_1_A 0x701b4 +#define _PLANE_CC_VAL_2_A 0x702b4#define _PLANE_AUX_DIST_1_A 0x701c0#define _PLANE_AUX_DIST_2_A 0x702c0#define _PLANE_AUX_OFFSET_1_A 0x701c4
@@ -6768,6 +6770,16 @@ enum {#define _PLANE_NV12_BUF_CFG_1_A 0x70278#define _PLANE_NV12_BUF_CFG_2_A 0x70378 +#define _PLANE_CC_VAL_1_B 0x711b4 +#define _PLANE_CC_VAL_2_B 0x712b4 +#define _PLANE_CC_VAL_1 (pipe) _PIPE(pipe, _PLANE_CC_VAL_1_A, _PLANE_CC_VAL_1_B) +#define _PLANE_CC_VAL_2 (pipe) _PIPE(pipe, _PLANE_CC_VAL_2_A, _PLANE_CC_VAL_2_B) +#define PLANE_CC_VAL (pipe, plane) \ + _MMIO_PLANE(plane, _PLANE_CC_VAL_1(pipe), _PLANE_CC_VAL_2(pipe)) + +#define CC_VAL_LOWER_OFFSET 4 +#define CC_VAL_HIGHER_OFFSET 5 +/* Input CSC Register Definitions */ #define _PLANE_INPUT_CSC_RY_GY_1_A 0x701E0#define _PLANE_INPUT_CSC_RY_GY_2_A 0x702E0
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH v3 11/11 drm/i915/tgl: Add Clear Color supoort for TGL Render Decompression
Render Decompression is supported with Y-Tiled main surface. The CCS is linear and has 4 bits of data for each main surface cache line pair, a ratio of 1:256. Additional Clear Color information is passed from the user-space through an offset in the GEM BO. Add a new modifier to identify and parse new Clear Color information and extend Gen12 render decompression functionality to the newly added modifier.
v2: Fix has_alpha flag for modifiers, omit CC modifier during initial
plane config(Matt). Fix Lookup error.
v3: Fix the panic while running kms_cube
--- drivers/gpu/drm/i915/display/intel_display.c | 52 +++++++++++++++++++ .../drm/i915/display/intel_display_types.h | 3 ++ drivers/gpu/drm/i915/display/intel_sprite.c | 11 +++- drivers/gpu/drm/i915/i915_reg.h | 12 +++++ 4 files changed, 77 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/display/intel_display.c +52 -0
@@ -1919,6 +1919,10 @@ intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)if (color_plane ==1 )return 64 ;/* fall through */ +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : +if (color_plane ==1 || color_plane ==2 ) +return 64 ; +/* fall through */ case I915_FORMAT_MOD_Y_TILED :if (IS_GEN (dev_priv,2 ) ||HAS_128_BYTE_Y_TILING (dev_priv))return 128 ;
@@ -2060,6 +2064,7 @@ static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,return 256 *1024 ;return 0 ;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return 16 *1024 ;case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Yf_TILED_CCS:
@@ -2265,6 +2270,8 @@ static bool is_surface_linear(u64 modifier, int color_plane)return true;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS :return color_plane ==1 ; +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : +return color_plane ==1 || color_plane ==2 ;case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS :return color_plane ==1 || color_plane ==3 ;default :
@@ -2458,6 +2465,7 @@ static unsigned int intel_fb_modifier_to_tiling(u64 fb_modifier)case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS :case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return I915_TILING_Y ;default :return I915_TILING_NONE ;
@@ -2511,6 +2519,25 @@ static const struct drm_format_info gen12_ccs_formats[] = { .cpp = { 1, 1, 2, 1}, .hsub = 2, .vsub = 2, .is_yuv = true }, }; +/* +* Gen-12 compression uses 4 bits of CCS data for each cache line pair in the +* main surface. And each 64B CCS cache line represents an area of 4x1 Y-tiles +* in the main surface. With 4 byte pixels and each Y-tile having dimensions of +* 32x32 pixels, the ratio turns out to 1B in the CCS for every 2 x 32 pixels in +* the main surface. Additional surface is used to pass the Clear Color +* structure for the driver to program the DE. +*/ +static const struct drm_format_info gen12_ccs_cc_formats[] = { + { .format =DRM_FORMAT_XRGB8888 , .depth =24 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , }, + { .format =DRM_FORMAT_XBGR8888 , .depth =24 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , }, + { .format =DRM_FORMAT_ARGB8888 , .depth =32 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , .has_alpha = true }, + { .format =DRM_FORMAT_ABGR8888 , .depth =32 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , .has_alpha = true }, +}; +static const struct drm_format_info *lookup_format_info (const struct drm_format_info formats[],int num_formats,u32 format)
@@ -2538,6 +2565,10 @@ intel_get_format_info(const struct drm_mode_fb_cmd2 *cmd)return lookup_format_info (gen12_ccs_formats,ARRAY_SIZE (gen12_ccs_formats), cmd->pixel_format); +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : +return lookup_format_info (gen12_ccs_cc_formats, +ARRAY_SIZE (gen12_ccs_cc_formats), + cmd->pixel_format);default :return NULL ; }
@@ -2547,6 +2578,7 @@ bool is_ccs_modifier(u64 modifier) {return modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS || modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS || + modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC || modifier ==I915_FORMAT_MOD_Y_TILED_CCS || modifier == I915_FORMAT_MOD_Yf_TILED_CCS; }
@@ -2734,6 +2766,8 @@ static bool is_ccs_plane(u64 modifier, int color_plane)return false; else if (modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS) return color_plane == 3 || color_plane == 1; + else if (modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC) + return color_plane == 1 || color_plane == 2; else return color_plane == 1; }
@@ -2805,6 +2839,14 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv, cpp = fb->format->cpp[i];intel_fb_plane_dims (&width, &height, fb, i); +/* +* Plane 2 of Render Compression with Clear Color fb modifier is consumed +* by the driver and not passed to DE. Skip the arithmetic related to +* alignment and offset calculation. +*/ +if (i ==2 && fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ) +continue ; + ret =intel_fb_offset_to_xy (&x, &y, fb, i);if (ret) { DRM_DEBUG_KMS("bad fb plane %d offset: 0x%x\n",
@@ -4274,6 +4316,7 @@ static u32 skl_plane_ctl_tiling(u64 fb_modifier)case I915_FORMAT_MOD_Y_TILED :return PLANE_CTL_TILED_Y ;case I915_FORMAT_MOD_Y_TILED_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return PLANE_CTL_TILED_Y |PLANE_CTL_RENDER_DECOMPRESSION_ENABLE ;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : return PLANE_CTL_TILED_Y |
@@ -14536,6 +14579,15 @@ static int intel_plane_pin_fb(struct intel_plane_state *plane_state) plane_state->vma = vma; +if (fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ) { +u32 *ccaddr =kmap_atomic (i915_gem_object_get_page (intel_fb_obj (fb), + fb->offsets[2 ] >>PAGE_SHIFT )); + + plane_state->ccval = ((u64)*(ccaddr +CC_VAL_HIGHER_OFFSET ) <<32 ) + | *(ccaddr +CC_VAL_LOWER_OFFSET ); +kunmap_atomic (ccaddr); + } +return 0 ; }
drivers/gpu/drm/i915/display/intel_display_types.h +3 -0
@@ -579,6 +579,9 @@ struct intel_plane_state {u32 planar_slave;struct drm_intel_sprite_colorkey ckey; + +/* Clear Color Value */ +u64 ccval; };struct intel_initial_plane_config {
drivers/gpu/drm/i915/display/intel_sprite.c +10 -1
@@ -549,6 +549,7 @@ skl_program_plane(struct intel_plane *plane,u32 plane_color_ctl =0 ;unsigned long irqflags;u32 keymsk, keymax; +u64 ccval = plane_state->ccval; plane_ctl |=skl_plane_ctl_crtc (crtc_state);
@@ -609,6 +610,10 @@ skl_program_plane(struct intel_plane *plane,if (fb->format->is_yuv &&icl_is_hdr_plane (dev_priv, plane_id))icl_program_input_csc (plane, crtc_state, plane_state); +if (fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ) +intel_uncore_write64_fw (&dev_priv->uncore, +PLANE_CC_VAL (pipe, plane_id), ccval); +skl_write_plane_wm (plane, crtc_state);I915_WRITE_FW (PLANE_KEYVAL (pipe, plane_id), key->min_value);
@@ -1738,7 +1743,8 @@ static int skl_plane_check_fb(const struct intel_crtc_state *crtc_state, fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS || fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS || fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS || - fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS)) { + fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS || + fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC)) {DRM_DEBUG_KMS ("Y/Yf tiling not supported in IF-ID mode\n" );return -EINVAL ; }
@@ -2153,6 +2159,7 @@ static const u64 skl_plane_format_modifiers_ccs[] = {static const u64 gen12_plane_format_modifiers_mc_ccs[] = {I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS ,I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS , +I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ,I915_FORMAT_MOD_Y_TILED ,I915_FORMAT_MOD_X_TILED ,DRM_FORMAT_MOD_LINEAR ,
@@ -2161,6 +2168,7 @@ static const u64 gen12_plane_format_modifiers_mc_ccs[] = {static const u64 gen12_plane_format_modifiers_rc_ccs[] = {I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS , +I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ,I915_FORMAT_MOD_Y_TILED ,I915_FORMAT_MOD_X_TILED ,DRM_FORMAT_MOD_LINEAR ,
@@ -2334,6 +2342,7 @@ static bool gen12_plane_format_mod_supported(struct drm_plane *_plane,case I915_FORMAT_MOD_X_TILED :case I915_FORMAT_MOD_Y_TILED :case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :break ;default :return false;
drivers/gpu/drm/i915/i915_reg.h +12 -0
@@ -6734,6 +6734,8 @@ enum {#define _PLANE_KEYMAX_1_A 0x701a0#define _PLANE_KEYMAX_2_A 0x702a0#define PLANE_KEYMAX_ALPHA (a) ((a) << 24) +#define _PLANE_CC_VAL_1_A 0x701b4 +#define _PLANE_CC_VAL_2_A 0x702b4#define _PLANE_AUX_DIST_1_A 0x701c0#define _PLANE_AUX_DIST_2_A 0x702c0#define _PLANE_AUX_OFFSET_1_A 0x701c4
@@ -6773,6 +6775,16 @@ enum {#define _PLANE_NV12_BUF_CFG_1_A 0x70278#define _PLANE_NV12_BUF_CFG_2_A 0x70378 +#define _PLANE_CC_VAL_1_B 0x711b4 +#define _PLANE_CC_VAL_2_B 0x712b4 +#define _PLANE_CC_VAL_1 (pipe) _PIPE(pipe, _PLANE_CC_VAL_1_A, _PLANE_CC_VAL_1_B) +#define _PLANE_CC_VAL_2 (pipe) _PIPE(pipe, _PLANE_CC_VAL_2_A, _PLANE_CC_VAL_2_B) +#define PLANE_CC_VAL (pipe, plane) \ + _MMIO_PLANE(plane, _PLANE_CC_VAL_1(pipe), _PLANE_CC_VAL_2(pipe)) + +#define CC_VAL_LOWER_OFFSET 4 +#define CC_VAL_HIGHER_OFFSET 5 +/* Input CSC Register Definitions */ #define _PLANE_INPUT_CSC_RY_GY_1_A 0x701E0#define _PLANE_INPUT_CSC_RY_GY_2_A 0x702E0
Signature · 6 lines
2.20.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v3 11/11] drm/i915/tgl: Add Clear Color supoort for TGL Render Decompression
Quoted 67 lines · Radhakrishna Sripada
Render Decompression is supported with Y-Tiled main surface. The CCS is linear and has 4 bits of data for each main surface cache line pair, a ratio of 1:256. Additional Clear Color information is passed from the user-space through an offset in the GEM BO. Add a new modifier to identify and parse new Clear Color information and extend Gen12 render decompression functionality to the newly added modifier.
v2: Fix
has_alphaflag for modifiers, omit CC modifier during initial
plane config(Matt). Fix Lookup error.
v3: Fix the panic while runningkms_cubeCc Dhinakaran Pandiyan <[email protected]>Cc Ville Syrjala <[email protected]>Cc Shashank Sharma <[email protected]>Cc Rafael Antognolli <[email protected]>Cc Matt Roper <[email protected]>Cc Nanley G Chery <[email protected]>Signed-off-by Radhakrishna Sripada <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 52 +++++++++++++++++++ .../drm/i915/display/intel_display_types.h | 3 ++ drivers/gpu/drm/i915/display/intel_sprite.c | 11 +++- drivers/gpu/drm/i915/i915_reg.h | 12 +++++ 4 files changed, 77 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/display/intel_display.c +8
-0@@ -1919,6 +1919,10 @@ intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)if (color_plane ==1 )return 64 ;/* fall through */ +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : +if (color_plane ==1 || color_plane ==2 ) +return 64 ; +/* fall through */ case I915_FORMAT_MOD_Y_TILED :if (IS_GEN (dev_priv,2 ) ||HAS_128_BYTE_Y_TILING (dev_priv))return 128 ;@@ -2060,6 +2064,7 @@ static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,return 256 *1024 ;return 0 ;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return 16 *1024 ;case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Yf_TILED_CCS:@@ -2265,6 +2270,8 @@ static bool is_surface_linear(u64 modifier, int color_plane)return true;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS :return color_plane ==1 ; +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : +return color_plane ==1 || color_plane ==2 ;case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS :return color_plane ==1 || color_plane ==3 ;default :@@ -2458,6 +2465,7 @@ static unsigned int intel_fb_modifier_to_tiling(u64 fb_modifier)case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS :case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return I915_TILING_Y ;default :return I915_TILING_NONE ;@@ -2511,6 +2519,25 @@ static const struct drm_format_info gen12_ccs_formats[] = { .cpp = { 1, 1, 2, 1}, .hsub = 2, .vsub = 2, .is_yuv = true },
drivers/gpu/drm/i915/display/intel_display.c static const struct drm_format_info gen12_ccs_formats[] = { · line 2529
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +8
-0}; +/* +* Gen-12 compression uses 4 bits of CCS data for each cache line pair in the +* main surface. And each 64B CCS cache line represents an area of 4x1 Y-tiles +* in the main surface. With 4 byte pixels and each Y-tile having dimensions of +* 32x32 pixels, the ratio turns out to 1B in the CCS for every 2 x 32 pixels in +* the main surface. Additional surface is used to pass the Clear Color +* structure for the driver to program the DE. +*/
Rather than duplicating the previous comment's text I'd just say
"Same as gen12_ccs_formats[] above, but with an additional surface used to pass..."
Quoted 44 lines
drivers/gpu/drm/i915/display/intel_display.c +18
-0+static const struct drm_format_info gen12_ccs_cc_formats[] = { + { .format =DRM_FORMAT_XRGB8888 , .depth =24 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , }, + { .format =DRM_FORMAT_XBGR8888 , .depth =24 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , }, + { .format =DRM_FORMAT_ARGB8888 , .depth =32 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , .has_alpha = true }, + { .format =DRM_FORMAT_ABGR8888 , .depth =32 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , .has_alpha = true }, +}; +static const struct drm_format_info *lookup_format_info (const struct drm_format_info formats[],int num_formats,u32 format)@@ -2538,6 +2565,10 @@ intel_get_format_info(const struct drm_mode_fb_cmd2 *cmd)return lookup_format_info (gen12_ccs_formats,ARRAY_SIZE (gen12_ccs_formats), cmd->pixel_format); +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : +return lookup_format_info (gen12_ccs_cc_formats, +ARRAY_SIZE (gen12_ccs_cc_formats), + cmd->pixel_format);default :return NULL ; }@@ -2547,6 +2578,7 @@ bool is_ccs_modifier(u64 modifier) {return modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS || modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS || + modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC || modifier ==I915_FORMAT_MOD_Y_TILED_CCS || modifier == I915_FORMAT_MOD_Yf_TILED_CCS; }@@ -2734,6 +2766,8 @@ static bool is_ccs_plane(u64 modifier, int color_plane)return false; else if (modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS) return color_plane == 3 || color_plane == 1; + else if (modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC) + return color_plane == 1 || color_plane == 2; else return color_plane == 1; }@@ -2805,6 +2839,14 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv, cpp = fb->format->cpp[i];
drivers/gpu/drm/i915/display/intel_display.c intel_fill_fb_info(struct drm_i915_private *dev_priv, · line 2849
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +8
-0intel_fb_plane_dims (&width, &height, fb, i); +/* +* Plane 2 of Render Compression with Clear Color fb modifier is consumed +* by the driver and not passed to DE. Skip the arithmetic related to +* alignment and offset calculation. +*/ +if (i ==2 && fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ) +continue ; +
We might as well do this before the cpp and width/height assignments too?
Should we also be checking IS_ALIGNED(offsets[2], PAGE_SIZE)? We seem to rely on that after kmap'ing below.
Matt
Quoted 131 lines
drivers/gpu/drm/i915/display/intel_display.c +10
-0ret =intel_fb_offset_to_xy (&x, &y, fb, i);if (ret) { DRM_DEBUG_KMS("bad fb plane %d offset: 0x%x\n",@@ -4274,6 +4316,7 @@ static u32 skl_plane_ctl_tiling(u64 fb_modifier)case I915_FORMAT_MOD_Y_TILED :return PLANE_CTL_TILED_Y ;case I915_FORMAT_MOD_Y_TILED_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return PLANE_CTL_TILED_Y |PLANE_CTL_RENDER_DECOMPRESSION_ENABLE ;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : return PLANE_CTL_TILED_Y |@@ -14536,6 +14579,15 @@ static int intel_plane_pin_fb(struct intel_plane_state *plane_state) plane_state->vma = vma; +if (fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ) { +u32 *ccaddr =kmap_atomic (i915_gem_object_get_page (intel_fb_obj (fb), + fb->offsets[2 ] >>PAGE_SHIFT )); + + plane_state->ccval = ((u64)*(ccaddr +CC_VAL_HIGHER_OFFSET ) <<32 ) + | *(ccaddr +CC_VAL_LOWER_OFFSET ); +kunmap_atomic (ccaddr); + } +return 0 ; }drivers/gpu/drm/i915/display/intel_display_types.h +3
-0@@ -579,6 +579,9 @@ struct intel_plane_state {u32 planar_slave;struct drm_intel_sprite_colorkey ckey; + +/* Clear Color Value */ +u64 ccval; };struct intel_initial_plane_config {drivers/gpu/drm/i915/display/intel_sprite.c +10
-1@@ -549,6 +549,7 @@ skl_program_plane(struct intel_plane *plane,u32 plane_color_ctl =0 ;unsigned long irqflags;u32 keymsk, keymax; +u64 ccval = plane_state->ccval; plane_ctl |=skl_plane_ctl_crtc (crtc_state);@@ -609,6 +610,10 @@ skl_program_plane(struct intel_plane *plane,if (fb->format->is_yuv &&icl_is_hdr_plane (dev_priv, plane_id))icl_program_input_csc (plane, crtc_state, plane_state); +if (fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ) +intel_uncore_write64_fw (&dev_priv->uncore, +PLANE_CC_VAL (pipe, plane_id), ccval); +skl_write_plane_wm (plane, crtc_state);I915_WRITE_FW (PLANE_KEYVAL (pipe, plane_id), key->min_value);@@ -1738,7 +1743,8 @@ static int skl_plane_check_fb(const struct intel_crtc_state *crtc_state, fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS || fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS || fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS || - fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS)) { + fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS || + fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC)) {DRM_DEBUG_KMS ("Y/Yf tiling not supported in IF-ID mode\n" );return -EINVAL ; }@@ -2153,6 +2159,7 @@ static const u64 skl_plane_format_modifiers_ccs[] = {static const u64 gen12_plane_format_modifiers_mc_ccs[] = {I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS ,I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS , +I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ,I915_FORMAT_MOD_Y_TILED ,I915_FORMAT_MOD_X_TILED ,DRM_FORMAT_MOD_LINEAR ,@@ -2161,6 +2168,7 @@ static const u64 gen12_plane_format_modifiers_mc_ccs[] = {static const u64 gen12_plane_format_modifiers_rc_ccs[] = {I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS , +I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ,I915_FORMAT_MOD_Y_TILED ,I915_FORMAT_MOD_X_TILED ,DRM_FORMAT_MOD_LINEAR ,@@ -2334,6 +2342,7 @@ static bool gen12_plane_format_mod_supported(struct drm_plane *_plane,case I915_FORMAT_MOD_X_TILED :case I915_FORMAT_MOD_Y_TILED :case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :break ;default :return false;drivers/gpu/drm/i915/i915_reg.h +12
-0@@ -6734,6 +6734,8 @@ enum {#define _PLANE_KEYMAX_1_A 0x701a0#define _PLANE_KEYMAX_2_A 0x702a0#define PLANE_KEYMAX_ALPHA (a) ((a) << 24) +#define _PLANE_CC_VAL_1_A 0x701b4 +#define _PLANE_CC_VAL_2_A 0x702b4#define _PLANE_AUX_DIST_1_A 0x701c0#define _PLANE_AUX_DIST_2_A 0x702c0#define _PLANE_AUX_OFFSET_1_A 0x701c4@@ -6773,6 +6775,16 @@ enum {#define _PLANE_NV12_BUF_CFG_1_A 0x70278#define _PLANE_NV12_BUF_CFG_2_A 0x70378 +#define _PLANE_CC_VAL_1_B 0x711b4 +#define _PLANE_CC_VAL_2_B 0x712b4 +#define _PLANE_CC_VAL_1 (pipe) _PIPE(pipe, _PLANE_CC_VAL_1_A, _PLANE_CC_VAL_1_B) +#define _PLANE_CC_VAL_2 (pipe) _PIPE(pipe, _PLANE_CC_VAL_2_A, _PLANE_CC_VAL_2_B) +#define PLANE_CC_VAL (pipe, plane) \ + _MMIO_PLANE(plane, _PLANE_CC_VAL_1(pipe), _PLANE_CC_VAL_2(pipe)) + +#define CC_VAL_LOWER_OFFSET 4 +#define CC_VAL_HIGHER_OFFSET 5 +/* Input CSC Register Definitions */ #define _PLANE_INPUT_CSC_RY_GY_1_A 0x701E0#define _PLANE_INPUT_CSC_RY_GY_2_A 0x702E0Signature · 1 line
2.20.1
Signature · 9 lines
Matt Roper Graphics Software Engineer VTT-OSGC Platform Enablement Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v3 11/11] drm/i915/tgl: Add Clear Color supoort for TGL Render Decompression
Quoted 142 lines · Matt Roper
Quoted 68 lines · Radhakrishna Sripada
Render Decompression is supported with Y-Tiled main surface. The CCS is linear and has 4 bits of data for each main surface cache line pair, a ratio of 1:256. Additional Clear Color information is passed from the user-space through an offset in the GEM BO. Add a new modifier to identify and parse new Clear Color information and extend Gen12 render decompression functionality to the newly added modifier.
v2: Fix
has_alphaflag for modifiers, omit CC modifier during initial
plane config(Matt). Fix Lookup error.
v3: Fix the panic while runningkms_cubeCc Dhinakaran Pandiyan <[email protected]>Cc Ville Syrjala <[email protected]>Cc Shashank Sharma <[email protected]>Cc Rafael Antognolli <[email protected]>Cc Matt Roper <[email protected]>Cc Nanley G Chery <[email protected]>Signed-off-by Radhakrishna Sripada <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 52 +++++++++++++++++++ .../drm/i915/display/intel_display_types.h | 3 ++ drivers/gpu/drm/i915/display/intel_sprite.c | 11 +++- drivers/gpu/drm/i915/i915_reg.h | 12 +++++ 4 files changed, 77 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/display/intel_display.c +8
-0@@ -1919,6 +1919,10 @@ intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)if (color_plane ==1 )return 64 ;/* fall through */ +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : +if (color_plane ==1 || color_plane ==2 ) +return 64 ; +/* fall through */ case I915_FORMAT_MOD_Y_TILED :if (IS_GEN (dev_priv,2 ) ||HAS_128_BYTE_Y_TILING (dev_priv))return 128 ;@@ -2060,6 +2064,7 @@ static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,return 256 *1024 ;return 0 ;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return 16 *1024 ;case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Yf_TILED_CCS:@@ -2265,6 +2270,8 @@ static bool is_surface_linear(u64 modifier, int color_plane)return true;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS :return color_plane ==1 ; +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : +return color_plane ==1 || color_plane ==2 ;case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS :return color_plane ==1 || color_plane ==3 ;default :@@ -2458,6 +2465,7 @@ static unsigned int intel_fb_modifier_to_tiling(u64 fb_modifier)case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS :case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return I915_TILING_Y ;default :return I915_TILING_NONE ;@@ -2511,6 +2519,25 @@ static const struct drm_format_info gen12_ccs_formats[] = { .cpp = { 1, 1, 2, 1}, .hsub = 2, .vsub = 2, .is_yuv = true },drivers/gpu/drm/i915/display/intel_display.c static const struct drm_format_info gen12_ccs_formats[] = { · line 2529
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +8
-0}; +/* +* Gen-12 compression uses 4 bits of CCS data for each cache line pair in the +* main surface. And each 64B CCS cache line represents an area of 4x1 Y-tiles +* in the main surface. With 4 byte pixels and each Y-tile having dimensions of +* 32x32 pixels, the ratio turns out to 1B in the CCS for every 2 x 32 pixels in +* the main surface. Additional surface is used to pass the Clear Color +* structure for the driver to program the DE. +*/ Rather than duplicating the previous comment's text I'd just say
"Same as gen12_ccs_formats[] above, but with an additional surface used to pass..."
Quoted 44 lines
drivers/gpu/drm/i915/display/intel_display.c +18
-0+static const struct drm_format_info gen12_ccs_cc_formats[] = { + { .format =DRM_FORMAT_XRGB8888 , .depth =24 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , }, + { .format =DRM_FORMAT_XBGR8888 , .depth =24 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , }, + { .format =DRM_FORMAT_ARGB8888 , .depth =32 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , .has_alpha = true }, + { .format =DRM_FORMAT_ABGR8888 , .depth =32 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , .has_alpha = true }, +}; +static const struct drm_format_info *lookup_format_info (const struct drm_format_info formats[],int num_formats,u32 format)@@ -2538,6 +2565,10 @@ intel_get_format_info(const struct drm_mode_fb_cmd2 *cmd)return lookup_format_info (gen12_ccs_formats,ARRAY_SIZE (gen12_ccs_formats), cmd->pixel_format); +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : +return lookup_format_info (gen12_ccs_cc_formats, +ARRAY_SIZE (gen12_ccs_cc_formats), + cmd->pixel_format);default :return NULL ; }@@ -2547,6 +2578,7 @@ bool is_ccs_modifier(u64 modifier) {return modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS || modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS || + modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC || modifier ==I915_FORMAT_MOD_Y_TILED_CCS || modifier == I915_FORMAT_MOD_Yf_TILED_CCS; }@@ -2734,6 +2766,8 @@ static bool is_ccs_plane(u64 modifier, int color_plane)return false; else if (modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS) return color_plane == 3 || color_plane == 1; + else if (modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC) + return color_plane == 1 || color_plane == 2; else return color_plane == 1; }@@ -2805,6 +2839,14 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv, cpp = fb->format->cpp[i];drivers/gpu/drm/i915/display/intel_display.c intel_fill_fb_info(struct drm_i915_private *dev_priv, · line 2849
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +8
-0intel_fb_plane_dims (&width, &height, fb, i); +/* +* Plane 2 of Render Compression with Clear Color fb modifier is consumed +* by the driver and not passed to DE. Skip the arithmetic related to +* alignment and offset calculation. +*/ +if (i ==2 && fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ) +continue ; +We might as well do this before the cpp and width/height assignments too?
Quoted 2 lines
Should we also be checking
IS_ALIGNED(offsets[2], PAGE_SIZE)? We seem to rely on that after kmap'ing below.
I am wondering if it needs to be page aligned. Since Clear Color data follows a linear CCS, would a 64B alignment suffice?
-DK
Quoted 121 lines
Matt
Quoted 117 lines
drivers/gpu/drm/i915/display/intel_display.c +10
-0ret =intel_fb_offset_to_xy (&x, &y, fb, i);if (ret) { DRM_DEBUG_KMS("bad fb plane %d offset: 0x%x\n",@@ -4274,6 +4316,7 @@ static u32 skl_plane_ctl_tiling(u64 fb_modifier)case I915_FORMAT_MOD_Y_TILED :return PLANE_CTL_TILED_Y ;case I915_FORMAT_MOD_Y_TILED_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return PLANE_CTL_TILED_Y |PLANE_CTL_RENDER_DECOMPRESSION_ENABLE ;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : return PLANE_CTL_TILED_Y |@@ -14536,6 +14579,15 @@ static int intel_plane_pin_fb(struct intel_plane_state *plane_state) plane_state->vma = vma; +if (fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ) { +u32 *ccaddr =kmap_atomic (i915_gem_object_get_page (intel_fb_obj (fb), + fb->offsets[2 ] >>PAGE_SHIFT )); + + plane_state->ccval = ((u64)*(ccaddr +CC_VAL_HIGHER_OFFSET ) <<32 ) + | *(ccaddr +CC_VAL_LOWER_OFFSET ); +kunmap_atomic (ccaddr); + } +return 0 ; }drivers/gpu/drm/i915/display/intel_display_types.h +3
-0@@ -579,6 +579,9 @@ struct intel_plane_state {u32 planar_slave;struct drm_intel_sprite_colorkey ckey; + +/* Clear Color Value */ +u64 ccval; };struct intel_initial_plane_config {drivers/gpu/drm/i915/display/intel_sprite.c +10
-1@@ -549,6 +549,7 @@ skl_program_plane(struct intel_plane *plane,u32 plane_color_ctl =0 ;unsigned long irqflags;u32 keymsk, keymax; +u64 ccval = plane_state->ccval; plane_ctl |=skl_plane_ctl_crtc (crtc_state);@@ -609,6 +610,10 @@ skl_program_plane(struct intel_plane *plane,if (fb->format->is_yuv &&icl_is_hdr_plane (dev_priv, plane_id))icl_program_input_csc (plane, crtc_state, plane_state); +if (fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ) +intel_uncore_write64_fw (&dev_priv->uncore, +PLANE_CC_VAL (pipe, plane_id), ccval); +skl_write_plane_wm (plane, crtc_state);I915_WRITE_FW (PLANE_KEYVAL (pipe, plane_id), key->min_value);@@ -1738,7 +1743,8 @@ static int skl_plane_check_fb(const struct intel_crtc_state *crtc_state, fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS || fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS || fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS || - fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS)) { + fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS || + fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC)) {DRM_DEBUG_KMS ("Y/Yf tiling not supported in IF-ID mode\n" );return -EINVAL ; }@@ -2153,6 +2159,7 @@ static const u64 skl_plane_format_modifiers_ccs[] = {static const u64 gen12_plane_format_modifiers_mc_ccs[] = {I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS ,I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS , +I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ,I915_FORMAT_MOD_Y_TILED ,I915_FORMAT_MOD_X_TILED ,DRM_FORMAT_MOD_LINEAR ,@@ -2161,6 +2168,7 @@ static const u64 gen12_plane_format_modifiers_mc_ccs[] = {static const u64 gen12_plane_format_modifiers_rc_ccs[] = {I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS , +I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ,I915_FORMAT_MOD_Y_TILED ,I915_FORMAT_MOD_X_TILED ,DRM_FORMAT_MOD_LINEAR ,@@ -2334,6 +2342,7 @@ static bool gen12_plane_format_mod_supported(struct drm_plane *_plane,case I915_FORMAT_MOD_X_TILED :case I915_FORMAT_MOD_Y_TILED :case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :break ;default :return false;drivers/gpu/drm/i915/i915_reg.h +2
-0@@ -6734,6 +6734,8 @@ enum {#define _PLANE_KEYMAX_1_A 0x701a0#define _PLANE_KEYMAX_2_A 0x702a0#define PLANE_KEYMAX_ALPHA (a) ((a) << 24) +#define _PLANE_CC_VAL_1_A 0x701b4 +#define _PLANE_CC_VAL_2_A 0x702b4#define _PLANE_AUX_DIST_1_A 0x701c0#define _PLANE_AUX_DIST_2_A 0x702c0#define _PLANE_AUX_OFFSET_1_A 0x701c4@@ -6773,6 +6775,16 @@ enum {#define _PLANE_NV12_BUF_CFG_1_A 0x70278#define _PLANE_NV12_BUF_CFG_2_A 0x70378
Quoted 18 lines
Quoted 16 lines
drivers/gpu/drm/i915/i915_reg.h +10
-0+#define _PLANE_CC_VAL_1_B 0x711b4 +#define _PLANE_CC_VAL_2_B 0x712b4 +#define _PLANE_CC_VAL_1 (pipe) _PIPE(pipe, _PLANE_CC_VAL_1_A, _PLANE_CC_VAL_1_B) +#define _PLANE_CC_VAL_2 (pipe) _PIPE(pipe, _PLANE_CC_VAL_2_A, _PLANE_CC_VAL_2_B) +#define PLANE_CC_VAL (pipe, plane) \ + _MMIO_PLANE(plane, _PLANE_CC_VAL_1(pipe), _PLANE_CC_VAL_2(pipe)) + +#define CC_VAL_LOWER_OFFSET 4 +#define CC_VAL_HIGHER_OFFSET 5 +/* Input CSC Register Definitions */ #define _PLANE_INPUT_CSC_RY_GY_1_A 0x701E0#define _PLANE_INPUT_CSC_RY_GY_2_A 0x702E0Signature · 1 line
2.20.1
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v3 11/11] drm/i915/tgl: Add Clear Color supoort for TGL Render Decompression
Quoted 143 lines · Dhinakaran Pandiyan
Quoted 142 lines · Matt Roper
Quoted 68 lines · Radhakrishna Sripada
Render Decompression is supported with Y-Tiled main surface. The CCS is linear and has 4 bits of data for each main surface cache line pair, a ratio of 1:256. Additional Clear Color information is passed from the user-space through an offset in the GEM BO. Add a new modifier to identify and parse new Clear Color information and extend Gen12 render decompression functionality to the newly added modifier.
v2: Fix
has_alphaflag for modifiers, omit CC modifier during initial
plane config(Matt). Fix Lookup error.
v3: Fix the panic while runningkms_cubeCc Dhinakaran Pandiyan <[email protected]>Cc Ville Syrjala <[email protected]>Cc Shashank Sharma <[email protected]>Cc Rafael Antognolli <[email protected]>Cc Matt Roper <[email protected]>Cc Nanley G Chery <[email protected]>Signed-off-by Radhakrishna Sripada <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 52 +++++++++++++++++++ .../drm/i915/display/intel_display_types.h | 3 ++ drivers/gpu/drm/i915/display/intel_sprite.c | 11 +++- drivers/gpu/drm/i915/i915_reg.h | 12 +++++ 4 files changed, 77 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/display/intel_display.c +8
-0@@ -1919,6 +1919,10 @@ intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)if (color_plane ==1 )return 64 ;/* fall through */ +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : +if (color_plane ==1 || color_plane ==2 ) +return 64 ; +/* fall through */ case I915_FORMAT_MOD_Y_TILED :if (IS_GEN (dev_priv,2 ) ||HAS_128_BYTE_Y_TILING (dev_priv))return 128 ;@@ -2060,6 +2064,7 @@ static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,return 256 *1024 ;return 0 ;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return 16 *1024 ;case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Yf_TILED_CCS:@@ -2265,6 +2270,8 @@ static bool is_surface_linear(u64 modifier, int color_plane)return true;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS :return color_plane ==1 ; +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : +return color_plane ==1 || color_plane ==2 ;case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS :return color_plane ==1 || color_plane ==3 ;default :@@ -2458,6 +2465,7 @@ static unsigned int intel_fb_modifier_to_tiling(u64 fb_modifier)case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS :case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return I915_TILING_Y ;default :return I915_TILING_NONE ;@@ -2511,6 +2519,25 @@ static const struct drm_format_info gen12_ccs_formats[] = { .cpp = { 1, 1, 2, 1}, .hsub = 2, .vsub = 2, .is_yuv = true },drivers/gpu/drm/i915/display/intel_display.c static const struct drm_format_info gen12_ccs_formats[] = { · line 2529
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +8
-0}; +/* +* Gen-12 compression uses 4 bits of CCS data for each cache line pair in the +* main surface. And each 64B CCS cache line represents an area of 4x1 Y-tiles +* in the main surface. With 4 byte pixels and each Y-tile having dimensions of +* 32x32 pixels, the ratio turns out to 1B in the CCS for every 2 x 32 pixels in +* the main surface. Additional surface is used to pass the Clear Color +* structure for the driver to program the DE. +*/ Rather than duplicating the previous comment's text I'd just say
"Same as gen12_ccs_formats[] above, but with an additional surface used to pass..."
Quoted 44 lines
drivers/gpu/drm/i915/display/intel_display.c +18
-0+static const struct drm_format_info gen12_ccs_cc_formats[] = { + { .format =DRM_FORMAT_XRGB8888 , .depth =24 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , }, + { .format =DRM_FORMAT_XBGR8888 , .depth =24 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , }, + { .format =DRM_FORMAT_ARGB8888 , .depth =32 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , .has_alpha = true }, + { .format =DRM_FORMAT_ABGR8888 , .depth =32 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , .has_alpha = true }, +}; +static const struct drm_format_info *lookup_format_info (const struct drm_format_info formats[],int num_formats,u32 format)@@ -2538,6 +2565,10 @@ intel_get_format_info(const struct drm_mode_fb_cmd2 *cmd)return lookup_format_info (gen12_ccs_formats,ARRAY_SIZE (gen12_ccs_formats), cmd->pixel_format); +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : +return lookup_format_info (gen12_ccs_cc_formats, +ARRAY_SIZE (gen12_ccs_cc_formats), + cmd->pixel_format);default :return NULL ; }@@ -2547,6 +2578,7 @@ bool is_ccs_modifier(u64 modifier) {return modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS || modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS || + modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC || modifier ==I915_FORMAT_MOD_Y_TILED_CCS || modifier == I915_FORMAT_MOD_Yf_TILED_CCS; }@@ -2734,6 +2766,8 @@ static bool is_ccs_plane(u64 modifier, int color_plane)return false; else if (modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS) return color_plane == 3 || color_plane == 1; + else if (modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC) + return color_plane == 1 || color_plane == 2; else return color_plane == 1; }@@ -2805,6 +2839,14 @@ intel_fill_fb_info(struct drm_i915_private *dev_priv, cpp = fb->format->cpp[i];drivers/gpu/drm/i915/display/intel_display.c intel_fill_fb_info(struct drm_i915_private *dev_priv, · line 2849
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +8
-0intel_fb_plane_dims (&width, &height, fb, i); +/* +* Plane 2 of Render Compression with Clear Color fb modifier is consumed +* by the driver and not passed to DE. Skip the arithmetic related to +* alignment and offset calculation. +*/ +if (i ==2 && fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ) +continue ; +We might as well do this before the cpp and width/height assignments too?
Quoted 7 lines
Quoted 2 lines
Should we also be checking
IS_ALIGNED(offsets[2], PAGE_SIZE)? We seem to rely on that after kmap'ing below.I am wondering if it needs to be page aligned. Since Clear Color data follows a linear CCS, would a 64B alignment suffice?
-DK
The kmap_atomic() farther down gives you a pointer to the beginning of the page that holds the CC. So if you don't require page alignment, you'll just need to account for that when extracting ccval below.
Matt
Quoted 141 lines
Quoted 140 lines
Matt
Quoted 133 lines
drivers/gpu/drm/i915/display/intel_display.c +10
-0ret =intel_fb_offset_to_xy (&x, &y, fb, i);if (ret) { DRM_DEBUG_KMS("bad fb plane %d offset: 0x%x\n",@@ -4274,6 +4316,7 @@ static u32 skl_plane_ctl_tiling(u64 fb_modifier)case I915_FORMAT_MOD_Y_TILED :return PLANE_CTL_TILED_Y ;case I915_FORMAT_MOD_Y_TILED_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return PLANE_CTL_TILED_Y |PLANE_CTL_RENDER_DECOMPRESSION_ENABLE ;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : return PLANE_CTL_TILED_Y |@@ -14536,6 +14579,15 @@ static int intel_plane_pin_fb(struct intel_plane_state *plane_state) plane_state->vma = vma; +if (fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ) { +u32 *ccaddr =kmap_atomic (i915_gem_object_get_page (intel_fb_obj (fb), + fb->offsets[2 ] >>PAGE_SHIFT )); + + plane_state->ccval = ((u64)*(ccaddr +CC_VAL_HIGHER_OFFSET ) <<32 ) + | *(ccaddr +CC_VAL_LOWER_OFFSET ); +kunmap_atomic (ccaddr); + } +return 0 ; }drivers/gpu/drm/i915/display/intel_display_types.h +3
-0@@ -579,6 +579,9 @@ struct intel_plane_state {u32 planar_slave;struct drm_intel_sprite_colorkey ckey; + +/* Clear Color Value */ +u64 ccval; };struct intel_initial_plane_config {drivers/gpu/drm/i915/display/intel_sprite.c +10
-1@@ -549,6 +549,7 @@ skl_program_plane(struct intel_plane *plane,u32 plane_color_ctl =0 ;unsigned long irqflags;u32 keymsk, keymax; +u64 ccval = plane_state->ccval; plane_ctl |=skl_plane_ctl_crtc (crtc_state);@@ -609,6 +610,10 @@ skl_program_plane(struct intel_plane *plane,if (fb->format->is_yuv &&icl_is_hdr_plane (dev_priv, plane_id))icl_program_input_csc (plane, crtc_state, plane_state); +if (fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ) +intel_uncore_write64_fw (&dev_priv->uncore, +PLANE_CC_VAL (pipe, plane_id), ccval); +skl_write_plane_wm (plane, crtc_state);I915_WRITE_FW (PLANE_KEYVAL (pipe, plane_id), key->min_value);@@ -1738,7 +1743,8 @@ static int skl_plane_check_fb(const struct intel_crtc_state *crtc_state, fb->modifier == I915_FORMAT_MOD_Y_TILED_CCS || fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS || fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS || - fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS)) { + fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS || + fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC)) {DRM_DEBUG_KMS ("Y/Yf tiling not supported in IF-ID mode\n" );return -EINVAL ; }@@ -2153,6 +2159,7 @@ static const u64 skl_plane_format_modifiers_ccs[] = {static const u64 gen12_plane_format_modifiers_mc_ccs[] = {I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS ,I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS , +I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ,I915_FORMAT_MOD_Y_TILED ,I915_FORMAT_MOD_X_TILED ,DRM_FORMAT_MOD_LINEAR ,@@ -2161,6 +2168,7 @@ static const u64 gen12_plane_format_modifiers_mc_ccs[] = {static const u64 gen12_plane_format_modifiers_rc_ccs[] = {I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS , +I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ,I915_FORMAT_MOD_Y_TILED ,I915_FORMAT_MOD_X_TILED ,DRM_FORMAT_MOD_LINEAR ,@@ -2334,6 +2342,7 @@ static bool gen12_plane_format_mod_supported(struct drm_plane *_plane,case I915_FORMAT_MOD_X_TILED :case I915_FORMAT_MOD_Y_TILED :case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :break ;default :return false;drivers/gpu/drm/i915/i915_reg.h +12
-0@@ -6734,6 +6734,8 @@ enum {#define _PLANE_KEYMAX_1_A 0x701a0#define _PLANE_KEYMAX_2_A 0x702a0#define PLANE_KEYMAX_ALPHA (a) ((a) << 24) +#define _PLANE_CC_VAL_1_A 0x701b4 +#define _PLANE_CC_VAL_2_A 0x702b4#define _PLANE_AUX_DIST_1_A 0x701c0#define _PLANE_AUX_DIST_2_A 0x702c0#define _PLANE_AUX_OFFSET_1_A 0x701c4@@ -6773,6 +6775,16 @@ enum {#define _PLANE_NV12_BUF_CFG_1_A 0x70278#define _PLANE_NV12_BUF_CFG_2_A 0x70378 +#define _PLANE_CC_VAL_1_B 0x711b4 +#define _PLANE_CC_VAL_2_B 0x712b4 +#define _PLANE_CC_VAL_1 (pipe) _PIPE(pipe, _PLANE_CC_VAL_1_A, _PLANE_CC_VAL_1_B) +#define _PLANE_CC_VAL_2 (pipe) _PIPE(pipe, _PLANE_CC_VAL_2_A, _PLANE_CC_VAL_2_B) +#define PLANE_CC_VAL (pipe, plane) \ + _MMIO_PLANE(plane, _PLANE_CC_VAL_1(pipe), _PLANE_CC_VAL_2(pipe)) + +#define CC_VAL_LOWER_OFFSET 4 +#define CC_VAL_HIGHER_OFFSET 5 +/* Input CSC Register Definitions */ #define _PLANE_INPUT_CSC_RY_GY_1_A 0x701E0#define _PLANE_INPUT_CSC_RY_GY_2_A 0x702E0Signature · 1 line
2.20.1
Signature · 9 lines
Matt Roper Graphics Software Engineer VTT-OSGC Platform Enablement Intel Corporation (916) 356-2795 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH v3 11/11] drm/i915/tgl: Add Clear Color supoort for TGL Render Decompression
In reply to Matt RoperHi Matt,
Quoted 103 lines
-----Original Message-----
From: Roper, Matthew D
Sent: Friday, October 4, 2019 4:53 PM
To: Sripada, Radhakrishna <[email protected]>
Cc: [email protected]; Pandiyan, Dhinakaran <[email protected]>; Syrjala, Ville <[email protected]>; Sharma, Shashank <[email protected]>; Antognolli, Rafael <[email protected]>; Chery, Nanley G <[email protected]>
Subject: Re: [PATCH v3 11/11] drm/i915/tgl: Add Clear Color supoort for TGL Render Decompressiondrivers/gpu/drm/i915/display/intel_display.c intel_tile_width_bytes(const struct
Quoted 31 lines · Radhakrishna Sripada
Render Decompression is supported with Y-Tiled main surface. The CCS is linear and has 4 bits of data for each main surface cache line pair, a ratio of 1:256. Additional Clear Color information is passed from the user-space through an offset in the GEM BO. Add a new modifier to identify and parse new Clear Color information and extend Gen12 render decompression functionality to the newly added modifier.
v2: Fix
has_alphaflag for modifiers, omit CC modifier during initial
plane config(Matt). Fix Lookup error.
v3: Fix the panic while runningkms_cubeCc Dhinakaran Pandiyan <[email protected]>Cc Ville Syrjala <[email protected]>Cc Shashank Sharma <[email protected]>Cc Rafael Antognolli <[email protected]>Cc Matt Roper <[email protected]>Cc Nanley G Chery <[email protected]>Signed-off-by Radhakrishna Sripada <[email protected]>--- drivers/gpu/drm/i915/display/intel_display.c | 52 +++++++++++++++++++ .../drm/i915/display/intel_display_types.h | 3 ++ drivers/gpu/drm/i915/display/intel_sprite.c | 11 +++- drivers/gpu/drm/i915/i915_reg.h | 12 +++++ 4 files changed, 77 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/display/intel_display.c +0
-0@@ -1919,6 +1919,10 @@ intel_tile_width_bytes(const struct
drm_framebuffer*fb, intcolor_plane)drivers/gpu/drm/i915/display/intel_display.c intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)
Quoted 9 lines
drivers/gpu/drm/i915/display/intel_display.c +4
-0if (color_plane ==1 )return 64 ;/* fall through */ +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : +if (color_plane ==1 || color_plane ==2 ) +return 64 ; +/* fall through */ case I915_FORMAT_MOD_Y_TILED : if (IS_GEN(dev_priv, 2) ||
HAS_128_BYTE_Y_TILING(dev_priv))drivers/gpu/drm/i915/display/intel_display.c static unsigned int intel_surf_alignment(const
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_display.c +0
-0return 128 ;@@ -2060,6 +2064,7 @@ static unsigned int intel_surf_alignment(conststruct
drm_framebuffer*fb,drivers/gpu/drm/i915/display/intel_display.c static bool is_surface_linear(u64 modifier, int
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display.c +1
-0return 256 *1024 ;return 0 ;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return 16 *1024 ;case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Yf_TILED_CCS:@@ -2265,6 +2270,8 @@ static bool is_surface_linear(u64 modifier, int
color_plane)drivers/gpu/drm/i915/display/intel_display.c static unsigned int
Quoted 9 lines
drivers/gpu/drm/i915/display/intel_display.c +2
-0return true;case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS :return color_plane ==1 ; +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : +return color_plane ==1 || color_plane ==2 ;case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS :return color_plane ==1 || color_plane ==3 ;default :@@ -2458,6 +2465,7 @@ static unsigned int
intel_fb_modifier_to_tiling(u64 fb_modifier)drivers/gpu/drm/i915/display/intel_display.c static const struct drm_format_info
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display.c +1
-0case I915_FORMAT_MOD_Y_TILED_CCS :case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS :case I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :return I915_TILING_Y ;default :return I915_TILING_NONE ;@@ -2511,6 +2519,25 @@ static const struct drm_format_infogen12_ccs_formats[] = {
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_display.c +3
-0.cpp = { 1, 1, 2, 1}, .hsub = 2, .vsub = 2, .is_yuv = true }, }; +/* +* Gen-12 compression uses 4 bits of CCS data for each cache line +pair in the drivers/gpu/drm/i915/display/intel_display.c static const struct drm_format_info · line 2533
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +10
-0+* main surface. And each 64B CCS cache line represents an area of +4x1 Y-tiles +* in the main surface. With 4 byte pixels and each Y-tile having +dimensions of +* 32x32 pixels, the ratio turns out to 1B in the CCS for every 2 x +32 pixels in +* the main surface. Additional surface is used to pass the Clear +Color +* structure for the driver to program the DE. +*/ Rather than duplicating the previous comment's text I'd just say
Quoted 2 lines
"Same as gen12_ccs_formats[] above, but with an additional surface used to pass..."
Sure will update that in the next rev.
Quoted 57 lines
drivers/gpu/drm/i915/display/intel_display.c intel_get_format_info(const struct
Quoted 16 lines
drivers/gpu/drm/i915/display/intel_display.c +11
-0+static const struct drm_format_info gen12_ccs_cc_formats[] = { + { .format =DRM_FORMAT_XRGB8888 , .depth =24 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , }, + { .format =DRM_FORMAT_XBGR8888 , .depth =24 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , }, + { .format =DRM_FORMAT_ARGB8888 , .depth =32 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , .has_alpha = true }, + { .format =DRM_FORMAT_ABGR8888 , .depth =32 , .num_planes =3 , + .cpp = {4 ,1 ,0 , }, .hsub =2 , .vsub =32 , .has_alpha = true }, +}; + static const struct drm_format_info * lookup_format_info(conststruct
drm_format_infoformats[],drivers/gpu/drm/i915/display/intel_display.c +0
-0int num_formats, u32 format)@@ -2538,6 +2565,10 @@ intel_get_format_info(const struct
drm_mode_fb_cmd2*cmd)Quoted 11 lines
drivers/gpu/drm/i915/display/intel_display.c +4
-0return lookup_format_info (gen12_ccs_formats,ARRAY_SIZE (gen12_ccs_formats), cmd->pixel_format); +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : +return lookup_format_info (gen12_ccs_cc_formats, +ARRAY_SIZE (gen12_ccs_cc_formats), + cmd->pixel_format);default :return NULL ; }drivers/gpu/drm/i915/display/intel_display.c bool is_ccs_modifier(u64 modifier) {
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_display.c +3
-0@@ -2547,6 +2578,7 @@ bool is_ccs_modifier(u64 modifier) {return modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS || modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS || + modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC || modifier ==I915_FORMAT_MOD_Y_TILED_CCS || modifier == I915_FORMAT_MOD_Yf_TILED_CCS; } @@ -2734,6 +2766,8 @@ static bool is_ccs_plane(u64 modifier, int color_plane) return false; else if (modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS) return color_plane == 3 || color_plane == 1; + else if (modifier ==
I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC)drivers/gpu/drm/i915/display/intel_display.c intel_fill_fb_info(struct drm_i915_private
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_display.c +1
-0+return color_plane ==1 || color_plane ==2 ; else return color_plane == 1; }@@ -2805,6 +2839,14 @@ intel_fill_fb_info(struct drm_i915_private
*dev_priv,drivers/gpu/drm/i915/display/intel_display.c intel_fill_fb_info(struct drm_i915_private *dev_priv,
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_display.c +2
-0cpp = fb->format->cpp[i];intel_fb_plane_dims (&width, &height, fb, i); +/* +* Plane 2 of Render Compression with Clear Color fb modifier is consumed
drivers/gpu/drm/i915/display/intel_display.c intel_fill_fb_info(struct drm_i915_private · line 2844
Quoted 1 line
drivers/gpu/drm/i915/display/intel_display.c +1
-0+* by the driver and not passed to DE. Skip the arithmetic related to
drivers/gpu/drm/i915/display/intel_display.c intel_fill_fb_info(struct drm_i915_private *dev_priv,
Quoted 3 lines
drivers/gpu/drm/i915/display/intel_display.c +3
-0+* alignment and offset calculation. +*/ + if (i == 2 && fb->modifier ==
I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC)
Quoted 7 lines
drivers/gpu/drm/i915/display/intel_display.c intel_fill_fb_info(struct drm_i915_private *dev_priv, · line 2849
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_display.c +2
-0+continue ; +We might as well do this before the cpp and width/height assignments too?
Should we also be checking
IS_ALIGNED(offsets[2], PAGE_SIZE)? We seem to rely on that after kmap'ing below.
Will make the changes in next rev.
Thanks,
Radhakrishna(RK) Sripada
Quoted 156 lines
Matt
drivers/gpu/drm/i915/display/intel_display.c intel_fill_fb_info(struct drm_i915_private *dev_priv, · line 2852
Quoted 3 lines
drivers/gpu/drm/i915/display/intel_display.c +0
-0ret =intel_fb_offset_to_xy (&x, &y, fb, i);if (ret) { DRM_DEBUG_KMS("bad fb plane %d offset: 0x%x\n",@@ -4274,6 +4316,7
drivers/gpu/drm/i915/display/intel_display.c static u32 skl_plane_ctl_tiling(u64 fb_modifier) · line 4322
Quoted 6 lines
@@ static u32
skl_plane_ctl_tiling(u64 fb_modifier)drivers/gpu/drm/i915/display/intel_display.c +1
-0case I915_FORMAT_MOD_Y_TILED :return PLANE_CTL_TILED_Y ;case I915_FORMAT_MOD_Y_TILED_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC : return PLANE_CTL_TILED_Y |
PLANE_CTL_RENDER_DECOMPRESSION_ENABLE;drivers/gpu/drm/i915/display/intel_display.c static int intel_plane_pin_fb(struct · line 14583
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_display.c +1
-0case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : return PLANE_CTL_TILED_Y |@@ -14536,6 +14579,15 @@ static int intel_plane_pin_fb(struct intel_plane_state *plane_state) plane_state->vma = vma; + if (fb->modifier ==
I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC) {drivers/gpu/drm/i915/display/intel_display.c static int intel_plane_pin_fb(struct · line 14584
Quoted 1 line
drivers/gpu/drm/i915/display/intel_display.c +1
-0+ u32 *ccaddr =kmap_atomic(i915_gem_object_get_page(intel_fb_obj(fb),
drivers/gpu/drm/i915/display/intel_display.c static int intel_plane_pin_fb(struct · line 14588
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_display.c +3
-0+ fb- offsets[2] >> PAGE_SHIFT)); + + plane_state->ccval = ((u64)*(ccaddr +
CC_VAL_HIGHER_OFFSET) << 32)Quoted 36 lines
drivers/gpu/drm/i915/display/intel_display.c +4
-0+ | *(ccaddr + CC_VAL_LOWER_OFFSET); +kunmap_atomic (ccaddr); + } +return 0 ;}
drivers/gpu/drm/i915/display/intel_display_types.h +3
-0@@ -579,6 +579,9 @@ struct intel_plane_state {u32 planar_slave;struct drm_intel_sprite_colorkey ckey; + +/* Clear Color Value */ +u64 ccval; };struct intel_initial_plane_config {drivers/gpu/drm/i915/display/intel_sprite.c +1
-0@@ -549,6 +549,7 @@ skl_program_plane(struct intel_plane *plane,u32 plane_color_ctl =0 ;unsigned long irqflags;u32 keymsk, keymax; +u64 ccval = plane_state->ccval; plane_ctl |=skl_plane_ctl_crtc (crtc_state);drivers/gpu/drm/i915/display/intel_sprite.c skl_program_plane(struct intel_plane *plane, · line 613
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_sprite.c +1
-0@@ -609,6 +610,10 @@ skl_program_plane(struct intel_plane *plane,if (fb->format->is_yuv &&icl_is_hdr_plane (dev_priv, plane_id))icl_program_input_csc (plane, crtc_state, plane_state); + if (fb->modifier ==
I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC)drivers/gpu/drm/i915/display/intel_sprite.c skl_program_plane(struct intel_plane *plane, · line 615
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_sprite.c +2
-0+ intel_uncore_write64_fw(&dev_priv->uncore, + PLANE_CC_VAL(pipe, plane_id),ccval);
drivers/gpu/drm/i915/display/intel_sprite.c skl_program_plane(struct intel_plane *plane, · line 619
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_sprite.c +1
-0+skl_write_plane_wm (plane, crtc_state);I915_WRITE_FW (PLANE_KEYVAL (pipe, plane_id), key->min_value);@@
Quoted 1 line
-1738,7 +1743,8 @@ static int skl_plane_check_fb(const struct
intel_crtc_state*crtc_state,drivers/gpu/drm/i915/display/intel_sprite.c static int skl_plane_check_fb(const struct intel_crtc_state *crtc_state,
Quoted 6 lines
drivers/gpu/drm/i915/display/intel_sprite.c +2
-1fb->modifier ==I915_FORMAT_MOD_Y_TILED_CCS || fb->modifier == I915_FORMAT_MOD_Yf_TILED_CCS || fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS || - fb->modifier == I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS)) { + fb->modifier ==I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS || + fb->modifier ==
I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC)) {Quoted 1 line
DRM_DEBUG_KMS("Y/Yf tiling not supported in IF-ID
mode\n");
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_sprite.c +0
-0return -EINVAL ; }@@ -2153,6 +2159,7 @@ static const u64skl_plane_format_modifiers_ccs[] = { static const u64
gen12_plane_format_modifiers_mc_ccs[] = {
drivers/gpu/drm/i915/display/intel_sprite.c static bool
Quoted 16 lines
drivers/gpu/drm/i915/display/intel_sprite.c +2
-0I915_FORMAT_MOD_Y_TILED_GEN12_MC_CCS ,I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS , +I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ,I915_FORMAT_MOD_Y_TILED ,I915_FORMAT_MOD_X_TILED , DRM_FORMAT_MOD_LINEAR,@@ -2161,6 +2168,7 @@ static const u64 gen12_plane_format_modifiers_mc_ccs[] = {static const u64 gen12_plane_format_modifiers_rc_ccs[] = {I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS , +I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC ,I915_FORMAT_MOD_Y_TILED ,I915_FORMAT_MOD_X_TILED ,drivers/gpu/drm/i915/display/intel_sprite.c +0
-0DRM_FORMAT_MOD_LINEAR,@@ -2334,6 +2342,7 @@ static boolgen12_plane_format_mod_supported(struct
drm_plane*_plane,Quoted 22 lines
drivers/gpu/drm/i915/display/intel_sprite.c +1
-0case I915_FORMAT_MOD_X_TILED :case I915_FORMAT_MOD_Y_TILED :case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS : +case I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC :break ;default :return false;(quoted diff) +0
-0
b/drivers/gpu/drm/i915/i915_reg.hindex0abf9a3917ed..01023fc880c8100644drivers/gpu/drm/i915/i915_reg.h +2
-0@@ -6734,6 +6734,8 @@ enum {#define _PLANE_KEYMAX_1_A 0x701a0#define _PLANE_KEYMAX_2_A 0x702a0#define PLANE_KEYMAX_ALPHA (a) ((a) << 24) +#define _PLANE_CC_VAL_1_A 0x701b4 +#define _PLANE_CC_VAL_2_A 0x702b4#define _PLANE_AUX_DIST_1_A 0x701c0#define _PLANE_AUX_DIST_2_A 0x702c0#define _PLANE_AUX_OFFSET_1_A 0x701c4drivers/gpu/drm/i915/i915_reg.h enum { · line 6780
Quoted 6 lines
drivers/gpu/drm/i915/i915_reg.h +3
-0@@ -6773,6 +6775,16 @@ enum {#define _PLANE_NV12_BUF_CFG_1_A 0x70278#define _PLANE_NV12_BUF_CFG_2_A 0x70378 +#define _PLANE_CC_VAL_1_B 0x711b4 +#define _PLANE_CC_VAL_2_B 0x712b4 +#define _PLANE_CC_VAL_1 (pipe) _PIPE(pipe, _PLANE_CC_VAL_1_A,
_PLANE_CC_VAL_1_B)drivers/gpu/drm/i915/i915_reg.h enum { · line 6781
Quoted 1 line
drivers/gpu/drm/i915/i915_reg.h +1
-0+#define _PLANE_CC_VAL_2 (pipe) _PIPE(pipe, _PLANE_CC_VAL_2_A,
_PLANE_CC_VAL_2_B)drivers/gpu/drm/i915/i915_reg.h enum { · line 6783
Quoted 2 lines
drivers/gpu/drm/i915/i915_reg.h +2
-0+#define PLANE_CC_VAL (pipe, plane) \ + _MMIO_PLANE(plane, _PLANE_CC_VAL_1(pipe),
_PLANE_CC_VAL_2(pipe))Quoted 9 lines
drivers/gpu/drm/i915/i915_reg.h +4
-1+ +#define CC_VAL_LOWER_OFFSET 4 +#define CC_VAL_HIGHER_OFFSET 5 +/* Input CSC Register Definitions */ #define _PLANE_INPUT_CSC_RY_GY_1_A 0x701E0#define _PLANE_INPUT_CSC_RY_GY_2_A 0x702E0 --2.20.1
Quoted 8 lines
Quoted 1 line
--
Matt Roper
Graphics Software Engineer
VTT-OSGC Platform Enablement
Intel Corporation
(916) 356-2795
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for Clear Color Support for TGL Render Decompression (rev2)
In reply to Radhakrishna Sripada== Series Details ==
== Series Details ==
Series: Clear Color Support for TGL Render Decompression (rev2)
URL : https://patchwork.freedesktop.org/series/66814/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip 4706ae48bc8d drm/framebuffer: Format modifier for Intel Gen-12 render compression 526735a4860b drm/i915: Use intel_tile_height() instead of re-implementing ce9382f23e62 drm/i915: Move CCS stride alignment W/A inside intel_fb_stride_alignment dbdf41118454 drm/i915/tgl: Gen-12 render decompression f59bf40903d1 drm/i915: Extract framebufer CCS offset checks into a function bc2c3819f8a9 drm/framebuffer: Format modifier for Intel Gen-12 media compression 13725d0dc466 drm/i915: Skip rotated offset adjustment for unsupported modifiers 5953c08cd2f0 drm/fb: Extend format_info member arrays to handle four planes cacd4434d14b Gen-12 display can decompress surfaces compressed by the media engine. -:13: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line) #13: compressed buffers. Unlike render decompression, plane 6 and plane 7 do not
-:113: WARNING:LONG_LINE: line over 100 characters
#113: FILE: drivers/gpu/drm/i915/display/intel_display.c:2704:
+intel_fb_plane_get_subsampling(int *hsub, int *vsub, const struct drm_framebuffer *fb, int color_plane)
-:120: WARNING:LONG_LINE: line over 100 characters #120: FILE: drivers/gpu/drm/i915/display/intel_display.c:2711:
+ } mc_ccs_subsampling = {.cpp = {1, 1, 2, 1}, .hsub = {1, 8, 2, 16}, .vsub = {1, 32, 2, 32} };
total: 0 errors, 3 warnings, 0 checks, 509 lines checkeda4463972aec5 drm/framebuffer/tgl: Format modifier for Intel Gen 12 render compression with Clear Color -:7: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line) #7:
Gen12 display can decompress surfaces compressed by render engine with Clear Color, add
total: 0 errors, 1 warnings, 0 checks, 17 lines checked07177893b7b4 drm/i915/tgl: Add Clear Color supoort for TGL Render Decompression -:222: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'pipe' - possible side-effects? #222: FILE: drivers/gpu/drm/i915/i915_reg.h:6777:
+#define PLANE_CC_VAL(pipe, plane) \
+ _MMIO_PLANE(plane, _PLANE_CC_VAL_1(pipe), _PLANE_CC_VAL_2(pipe))
total: 0 errors, 0 warnings, 1 checks, 172 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for Clear Color Support for TGL Render Decompression (rev2)
In reply to Radhakrishna Sripada== Series Details ==
== Series Details ==
Series: Clear Color Support for TGL Render Decompression (rev2)
URL : https://patchwork.freedesktop.org/series/66814/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_6945 -> Patchwork_14510
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with Patchwork_14510 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_14510, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_14510:
### IGT changes ###
#### Possible regressions ####
* igt@kms_addfb_basic@bo-too-small-due-to-tiling:
- fi-blb-e6850: [PASS][1] -> [FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-blb-e6850/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-blb-e6850/igt@[email protected]
- fi-kbl-x1275: [PASS][3] -> [FAIL][4]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-kbl-x1275/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-kbl-x1275/igt@[email protected]
- fi-apl-guc: [PASS][5] -> [FAIL][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-apl-guc/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-apl-guc/igt@[email protected]
- fi-bsw-kefka: [PASS][7] -> [FAIL][8]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-bsw-kefka/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-bsw-kefka/igt@[email protected]
- fi-bdw-5557u: [PASS][9] -> [FAIL][10]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-bdw-5557u/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-bdw-5557u/igt@[email protected]
- fi-bwr-2160: [PASS][11] -> [FAIL][12]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-bwr-2160/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-bwr-2160/igt@[email protected]
- fi-skl-6770hq: [PASS][13] -> [FAIL][14]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-skl-6770hq/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-skl-6770hq/igt@[email protected]
- fi-skl-6600u: [PASS][15] -> [FAIL][16]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-skl-6600u/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-skl-6600u/igt@[email protected]
- fi-kbl-guc: [PASS][17] -> [FAIL][18]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-kbl-guc/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-kbl-guc/igt@[email protected]
- fi-kbl-8809g: [PASS][19] -> [FAIL][20]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-kbl-8809g/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-kbl-8809g/igt@[email protected]
- fi-skl-lmem: [PASS][21] -> [FAIL][22]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-skl-lmem/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-skl-lmem/igt@[email protected]
- fi-kbl-r: [PASS][23] -> [FAIL][24]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-kbl-r/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-kbl-r/igt@[email protected]
- fi-skl-6260u: [PASS][25] -> [FAIL][26]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-skl-6260u/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-skl-6260u/igt@[email protected]
- fi-byt-n2820: [PASS][27] -> [FAIL][28]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-byt-n2820/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-byt-n2820/igt@[email protected]
- fi-snb-2600: [PASS][29] -> [FAIL][30]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-snb-2600/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-snb-2600/igt@[email protected]
- fi-ilk-650: [PASS][31] -> [FAIL][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-ilk-650/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-ilk-650/igt@[email protected]
- fi-elk-e7500: [PASS][33] -> [FAIL][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-elk-e7500/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-elk-e7500/igt@[email protected]
- fi-bdw-gvtdvm: [PASS][35] -> [FAIL][36]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-bdw-gvtdvm/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-bdw-gvtdvm/igt@[email protected]
- fi-hsw-peppy: [PASS][37] -> [FAIL][38]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-hsw-peppy/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-hsw-peppy/igt@[email protected]
- fi-glk-dsi: [PASS][39] -> [FAIL][40]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-glk-dsi/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-glk-dsi/igt@[email protected]
- fi-snb-2520m: [PASS][41] -> [FAIL][42]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-snb-2520m/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-snb-2520m/igt@[email protected]
- fi-pnv-d510: [PASS][43] -> [FAIL][44]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-pnv-d510/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-pnv-d510/igt@[email protected]
- fi-cfl-8109u: [PASS][45] -> [FAIL][46]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-cfl-8109u/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-cfl-8109u/igt@[email protected]
- fi-kbl-7500u: [PASS][47] -> [FAIL][48]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-kbl-7500u/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-kbl-7500u/igt@[email protected]
- fi-gdg-551: [PASS][49] -> [FAIL][50]
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-gdg-551/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-gdg-551/igt@[email protected]
- fi-cml-u2: [PASS][51] -> [FAIL][52]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-cml-u2/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-cml-u2/igt@[email protected]
- fi-bxt-dsi: [PASS][53] -> [FAIL][54]
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-bxt-dsi/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-bxt-dsi/igt@[email protected]
- fi-byt-j1900: [PASS][55] -> [FAIL][56]
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-byt-j1900/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-byt-j1900/igt@[email protected]
- fi-hsw-4770: [PASS][57] -> [FAIL][58]
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-hsw-4770/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-hsw-4770/igt@[email protected]
- fi-cfl-guc: [PASS][59] -> [FAIL][60]
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-cfl-guc/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-cfl-guc/igt@[email protected]
- fi-whl-u: [PASS][61] -> [FAIL][62]
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-whl-u/igt@[email protected]
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-whl-u/igt@[email protected]
- fi-icl-u3: [PASS][63] -> [FAIL][64]
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-icl-u3/igt@[email protected]
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-icl-u3/igt@[email protected]
- fi-skl-guc: [PASS][65] -> [FAIL][66]
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-skl-guc/igt@[email protected]
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-skl-guc/igt@[email protected]
- fi-bsw-n3050: [PASS][67] -> [FAIL][68]
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-bsw-n3050/igt@[email protected]
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-bsw-n3050/igt@[email protected]
- fi-ivb-3770: [PASS][69] -> [FAIL][70]
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-ivb-3770/igt@[email protected]
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-ivb-3770/igt@[email protected]
- fi-skl-iommu: [PASS][71] -> [FAIL][72]
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-skl-iommu/igt@[email protected]
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-skl-iommu/igt@[email protected]
- fi-cfl-8700k: [PASS][73] -> [FAIL][74]
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-cfl-8700k/igt@[email protected]
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-cfl-8700k/igt@[email protected]
- fi-skl-6700k2: [PASS][75] -> [FAIL][76]
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-skl-6700k2/igt@[email protected]
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-skl-6700k2/igt@[email protected]
#### Suppressed ####
The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.
* igt@kms_addfb_basic@bo-too-small-due-to-tiling:
- {fi-icl-u4}: [PASS][77] -> [FAIL][78]
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-icl-u4/igt@[email protected]
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-icl-u4/igt@[email protected]
- {fi-icl-dsi}: [PASS][79] -> [FAIL][80]
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-icl-dsi/igt@[email protected]
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-icl-dsi/igt@[email protected]
- {fi-tgl-u}: [PASS][81] -> [FAIL][82]
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-tgl-u/igt@[email protected]
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-tgl-u/igt@[email protected]
- {fi-tgl-u2}: [PASS][83] -> [FAIL][84]
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-tgl-u2/igt@[email protected]
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-tgl-u2/igt@[email protected]
- {fi-cml-h}: [PASS][85] -> [FAIL][86]
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-cml-h/igt@[email protected]
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-cml-h/igt@[email protected]
- {fi-kbl-soraka}: [PASS][87] -> [FAIL][88]
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-kbl-soraka/igt@[email protected]
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-kbl-soraka/igt@[email protected]
- {fi-cml-s}: [PASS][89] -> [FAIL][90]
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-cml-s/igt@[email protected]
[90]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-cml-s/igt@[email protected]
Known issues
------------
Here are the changes found in Patchwork_14510 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_ctx_create@basic-files:
- fi-icl-u2: [PASS][91] -> [INCOMPLETE][92] ([fdo#107713] / [fdo#109100])
[91]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-icl-u2/igt@[email protected]
[92]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-icl-u2/igt@[email protected]
* igt@gem_mmap_gtt@basic-write-cpu-read-gtt:
- fi-icl-u3: [PASS][93] -> [DMESG-WARN][94] ([fdo#107724]) +1 similar issue
[93]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-icl-u3/igt@[email protected]
[94]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-icl-u3/igt@[email protected]
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- fi-apl-guc: [PASS][95] -> [DMESG-WARN][96] ([fdo#108566])
[95]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-apl-guc/igt@[email protected]
[96]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-apl-guc/igt@[email protected]
#### Possible fixes ####
* igt@gem_mmap_gtt@basic-read-write-distinct:
- fi-icl-u3: [DMESG-WARN][97] ([fdo#107724]) -> [PASS][98] +1 similar issue
[97]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-icl-u3/igt@[email protected]
[98]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-icl-u3/igt@[email protected]
* igt@i915_module_load@reload:
- fi-icl-u3: [DMESG-WARN][99] ([fdo#107724] / [fdo#111214]) -> [PASS][100]
[99]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-icl-u3/igt@[email protected]
[100]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-icl-u3/igt@[email protected]
* igt@i915_selftest@live_hangcheck:
- fi-kbl-7500u: [INCOMPLETE][101] ([fdo#108744]) -> [PASS][102]
[101]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-kbl-7500u/igt@i915_selftest@live_hangcheck.html
[102]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-kbl-7500u/igt@i915_selftest@live_hangcheck.html
* igt@kms_pipe_crc_basic@suspend-read-crc-pipe-a:
- fi-blb-e6850: [INCOMPLETE][103] ([fdo#107718]) -> [PASS][104]
[103]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-blb-e6850/igt@[email protected]
[104]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-blb-e6850/igt@[email protected]
#### Warnings ####
* igt@kms_chamelium@hdmi-hpd-fast:
- fi-kbl-7500u: [FAIL][105] ([fdo#111407]) -> [FAIL][106] ([fdo#111045] / [fdo#111096])
[105]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6945/fi-kbl-7500u/igt@[email protected]
[106]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/fi-kbl-7500u/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#107718]: https://bugs.freedesktop.org/show_bug.cgi?id=107718
[fdo#107724]: https://bugs.freedesktop.org/show_bug.cgi?id=107724
[fdo#108566]: https://bugs.freedesktop.org/show_bug.cgi?id=108566
[fdo#108744]: https://bugs.freedesktop.org/show_bug.cgi?id=108744
[fdo#109100]: https://bugs.freedesktop.org/show_bug.cgi?id=109100
[fdo#111045]: https://bugs.freedesktop.org/show_bug.cgi?id=111045
[fdo#111096]: https://bugs.freedesktop.org/show_bug.cgi?id=111096
[fdo#111214]: https://bugs.freedesktop.org/show_bug.cgi?id=111214
[fdo#111407]: https://bugs.freedesktop.org/show_bug.cgi?id=111407
Participating hosts (54 -> 47)
------------------------------
Missing (7): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-icl-y fi-byt-clapper fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* Linux: CI_DRM_6945 -> Patchwork_14510
CI-20190529: 20190529
CI_DRM_6945: f11d819264a3fab210498a4920ef34a891da39e0 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5197: aa534ff47fd2f455c8be9e59eae807695b87fcdd @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_14510: 07177893b7b448fdc913c88c3540dd59c756d4be @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
07177893b7b4 drm/i915/tgl: Add Clear Color supoort for TGL Render Decompression a4463972aec5 drm/framebuffer/tgl: Format modifier for Intel Gen 12 render compression with Clear Color cacd4434d14b Gen-12 display can decompress surfaces compressed by the media engine. 5953c08cd2f0 drm/fb: Extend format_info member arrays to handle four planes 13725d0dc466 drm/i915: Skip rotated offset adjustment for unsupported modifiers bc2c3819f8a9 drm/framebuffer: Format modifier for Intel Gen-12 media compression f59bf40903d1 drm/i915: Extract framebufer CCS offset checks into a function dbdf41118454 drm/i915/tgl: Gen-12 render decompressionce9382f23e62 drm/i915:
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14510/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for Clear Color Support for TGL Render Decompression (rev3)
In reply to Radhakrishna Sripada== Series Details ==
== Series Details ==
Series: Clear Color Support for TGL Render Decompression (rev3)
URL : https://patchwork.freedesktop.org/series/66814/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip fa405794ca6b drm/framebuffer: Format modifier for Intel Gen-12 render compression dc89777e0306 drm/i915: Use intel_tile_height() instead of re-implementing a54ed04cc4d8 drm/i915: Move CCS stride alignment W/A inside intel_fb_stride_alignment 9d840b1281fb drm/i915/tgl: Gen-12 render decompression d752e75805e5 drm/i915: Extract framebufer CCS offset checks into a function 8f42a26a0fb0 drm/framebuffer: Format modifier for Intel Gen-12 media compression 3db40490ca8f drm/i915: Skip rotated offset adjustment for unsupported modifiers 32f56db73bf2 drm/fb: Extend format_info member arrays to handle four planes 6e5a61ea78da Gen-12 display can decompress surfaces compressed by the media engine. -:13: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line) #13: compressed buffers. Unlike render decompression, plane 6 and plane 7 do not
-:113: WARNING:LONG_LINE: line over 100 characters
#113: FILE: drivers/gpu/drm/i915/display/intel_display.c:2704:
+intel_fb_plane_get_subsampling(int *hsub, int *vsub, const struct drm_framebuffer *fb, int color_plane)
-:120: WARNING:LONG_LINE: line over 100 characters #120: FILE: drivers/gpu/drm/i915/display/intel_display.c:2711:
+ } mc_ccs_subsampling = {.cpp = {1, 1, 2, 1}, .hsub = {1, 8, 2, 16}, .vsub = {1, 32, 2, 32} };
total: 0 errors, 3 warnings, 0 checks, 509 lines checkedf872ae0f29f7 drm/framebuffer/tgl: Format modifier for Intel Gen 12 render compression with Clear Color -:7: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line) #7:
Gen12 display can decompress surfaces compressed by render engine with Clear Color, add
total: 0 errors, 1 warnings, 0 checks, 17 lines checked82473beafe08 drm/i915/tgl: Add Clear Color supoort for TGL Render Decompression -:251: CHECK:MACRO_ARG_REUSE: Macro argument reuse 'pipe' - possible side-effects? #251: FILE: drivers/gpu/drm/i915/i915_reg.h:6782:
+#define PLANE_CC_VAL(pipe, plane) \
+ _MMIO_PLANE(plane, _PLANE_CC_VAL_1(pipe), _PLANE_CC_VAL_2(pipe))
total: 0 errors, 0 warnings, 1 checks, 198 lines checked
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.BAT: failure for Clear Color Support for TGL Render Decompression (rev3)
In reply to Radhakrishna Sripada== Series Details ==
== Series Details ==
Series: Clear Color Support for TGL Render Decompression (rev3)
URL : https://patchwork.freedesktop.org/series/66814/
State : failure
== Summary ==
CI Bug Log - changes from CI_DRM_6973 -> Patchwork_14576
====================================================
Summary
-------
**FAILURE**
Serious unknown changes coming with Patchwork_14576 absolutely need to be verified manually.
If you think the reported changes have nothing to do with the changes introduced in Patchwork_14576, please notify your bug team to allow them to document this new failure mode, which will reduce false positives in CI.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/index.html
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_14576:
### IGT changes ###
#### Possible regressions ####
* igt@kms_addfb_basic@bo-too-small-due-to-tiling:
- fi-blb-e6850: [PASS][1] -> [FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-blb-e6850/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-blb-e6850/igt@[email protected]
- fi-kbl-x1275: [PASS][3] -> [FAIL][4]
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-kbl-x1275/igt@[email protected]
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-kbl-x1275/igt@[email protected]
- fi-apl-guc: [PASS][5] -> [FAIL][6]
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-apl-guc/igt@[email protected]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-apl-guc/igt@[email protected]
- fi-bsw-kefka: [PASS][7] -> [FAIL][8]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-bsw-kefka/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-bsw-kefka/igt@[email protected]
- fi-bdw-5557u: [PASS][9] -> [FAIL][10]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-bdw-5557u/igt@[email protected]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-bdw-5557u/igt@[email protected]
- fi-bwr-2160: [PASS][11] -> [FAIL][12]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-bwr-2160/igt@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-bwr-2160/igt@[email protected]
- fi-skl-6770hq: [PASS][13] -> [FAIL][14]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-skl-6770hq/igt@[email protected]
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-skl-6770hq/igt@[email protected]
- fi-skl-6600u: [PASS][15] -> [FAIL][16]
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-skl-6600u/igt@[email protected]
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-skl-6600u/igt@[email protected]
- fi-kbl-guc: [PASS][17] -> [FAIL][18]
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-kbl-guc/igt@[email protected]
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-kbl-guc/igt@[email protected]
- fi-kbl-8809g: [PASS][19] -> [FAIL][20]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-kbl-8809g/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-kbl-8809g/igt@[email protected]
- fi-skl-lmem: [PASS][21] -> [FAIL][22]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-skl-lmem/igt@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-skl-lmem/igt@[email protected]
- fi-kbl-r: [PASS][23] -> [FAIL][24]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-kbl-r/igt@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-kbl-r/igt@[email protected]
- fi-skl-6260u: [PASS][25] -> [FAIL][26]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-skl-6260u/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-skl-6260u/igt@[email protected]
- fi-byt-n2820: [PASS][27] -> [FAIL][28]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-byt-n2820/igt@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-byt-n2820/igt@[email protected]
- fi-snb-2600: [PASS][29] -> [FAIL][30]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-snb-2600/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-snb-2600/igt@[email protected]
- fi-ilk-650: [PASS][31] -> [FAIL][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-ilk-650/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-ilk-650/igt@[email protected]
- fi-elk-e7500: [PASS][33] -> [FAIL][34]
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-elk-e7500/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-elk-e7500/igt@[email protected]
- fi-bdw-gvtdvm: [PASS][35] -> [FAIL][36]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-bdw-gvtdvm/igt@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-bdw-gvtdvm/igt@[email protected]
- fi-hsw-peppy: [PASS][37] -> [FAIL][38]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-hsw-peppy/igt@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-hsw-peppy/igt@[email protected]
- fi-icl-u2: [PASS][39] -> [FAIL][40]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-icl-u2/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-icl-u2/igt@[email protected]
- fi-glk-dsi: [PASS][41] -> [FAIL][42]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-glk-dsi/igt@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-glk-dsi/igt@[email protected]
- fi-snb-2520m: [PASS][43] -> [FAIL][44]
[43]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-snb-2520m/igt@[email protected]
[44]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-snb-2520m/igt@[email protected]
- fi-cfl-8109u: [PASS][45] -> [FAIL][46]
[45]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-cfl-8109u/igt@[email protected]
[46]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-cfl-8109u/igt@[email protected]
- fi-kbl-7500u: [PASS][47] -> [FAIL][48]
[47]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-kbl-7500u/igt@[email protected]
[48]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-kbl-7500u/igt@[email protected]
- fi-gdg-551: [PASS][49] -> [FAIL][50]
[49]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-gdg-551/igt@[email protected]
[50]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-gdg-551/igt@[email protected]
- fi-cml-u2: [PASS][51] -> [FAIL][52]
[51]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-cml-u2/igt@[email protected]
[52]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-cml-u2/igt@[email protected]
- fi-byt-j1900: [PASS][53] -> [FAIL][54]
[53]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-byt-j1900/igt@[email protected]
[54]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-byt-j1900/igt@[email protected]
- fi-hsw-4770: [PASS][55] -> [FAIL][56]
[55]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-hsw-4770/igt@[email protected]
[56]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-hsw-4770/igt@[email protected]
- fi-cfl-guc: [PASS][57] -> [FAIL][58]
[57]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-cfl-guc/igt@[email protected]
[58]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-cfl-guc/igt@[email protected]
- fi-whl-u: [PASS][59] -> [FAIL][60]
[59]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-whl-u/igt@[email protected]
[60]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-whl-u/igt@[email protected]
- fi-skl-guc: [PASS][61] -> [FAIL][62]
[61]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-skl-guc/igt@[email protected]
[62]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-skl-guc/igt@[email protected]
- fi-bsw-n3050: [PASS][63] -> [FAIL][64]
[63]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-bsw-n3050/igt@[email protected]
[64]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-bsw-n3050/igt@[email protected]
- fi-ivb-3770: [PASS][65] -> [FAIL][66]
[65]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-ivb-3770/igt@[email protected]
[66]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-ivb-3770/igt@[email protected]
- fi-skl-iommu: [PASS][67] -> [FAIL][68]
[67]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-skl-iommu/igt@[email protected]
[68]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-skl-iommu/igt@[email protected]
- fi-cfl-8700k: [PASS][69] -> [FAIL][70]
[69]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-cfl-8700k/igt@[email protected]
[70]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-cfl-8700k/igt@[email protected]
- fi-hsw-4770r: [PASS][71] -> [FAIL][72]
[71]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-hsw-4770r/igt@[email protected]
[72]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-hsw-4770r/igt@[email protected]
- fi-skl-6700k2: [PASS][73] -> [FAIL][74]
[73]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-skl-6700k2/igt@[email protected]
[74]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-skl-6700k2/igt@[email protected]
#### Suppressed ####
The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.
* igt@kms_addfb_basic@bo-too-small-due-to-tiling:
- {fi-icl-u4}: [PASS][75] -> [FAIL][76]
[75]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-icl-u4/igt@[email protected]
[76]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-icl-u4/igt@[email protected]
- {fi-icl-dsi}: [PASS][77] -> [FAIL][78]
[77]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-icl-dsi/igt@[email protected]
[78]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-icl-dsi/igt@[email protected]
- {fi-kbl-soraka}: [PASS][79] -> [FAIL][80]
[79]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-kbl-soraka/igt@[email protected]
[80]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-kbl-soraka/igt@[email protected]
- {fi-icl-guc}: NOTRUN -> [FAIL][81]
[81]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-icl-guc/igt@[email protected]
- {fi-cml-s}: [PASS][82] -> [FAIL][83]
[82]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-cml-s/igt@[email protected]
[83]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-cml-s/igt@[email protected]
Known issues
------------
Here are the changes found in Patchwork_14576 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_ctx_create@basic-files:
- fi-icl-u3: [PASS][84] -> [INCOMPLETE][85] ([fdo#107713] / [fdo#109100])
[84]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-icl-u3/igt@[email protected]
[85]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-icl-u3/igt@[email protected]
* igt@gem_ctx_switch@legacy-render:
- fi-bxt-dsi: [PASS][86] -> [INCOMPLETE][87] ([fdo#103927] / [fdo#111381])
[86]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-bxt-dsi/igt@[email protected]
[87]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-bxt-dsi/igt@[email protected]
* igt@kms_chamelium@hdmi-hpd-fast:
- fi-kbl-7500u: [PASS][88] -> [FAIL][89] ([fdo#111045] / [fdo#111096])
[88]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6973/fi-kbl-7500u/igt@[email protected]
[89]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/fi-kbl-7500u/igt@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103927]: https://bugs.freedesktop.org/show_bug.cgi?id=103927
[fdo#107713]: https://bugs.freedesktop.org/show_bug.cgi?id=107713
[fdo#109100]: https://bugs.freedesktop.org/show_bug.cgi?id=109100
[fdo#111045]: https://bugs.freedesktop.org/show_bug.cgi?id=111045
[fdo#111096]: https://bugs.freedesktop.org/show_bug.cgi?id=111096
[fdo#111381]: https://bugs.freedesktop.org/show_bug.cgi?id=111381
Participating hosts (53 -> 45)
------------------------------
Missing (8): fi-ilk-m540 fi-hsw-4200u fi-byt-squawks fi-bsw-cyan fi-pnv-d510 fi-icl-y fi-byt-clapper fi-bdw-samus
Build changes
-------------
* CI: CI-20190529 -> None
* Linux: CI_DRM_6973 -> Patchwork_14576
CI-20190529: 20190529
CI_DRM_6973: 7462c58bba0fb6e85bd380591c3fd86e298c0f95 @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_5206: 5a6c68568def840cd720f18fc66f529a89f84675 @ git://anongit.freedesktop.org/xorg/app/intel-gpu-tools
Patchwork_14576: 82473beafe084fb5633fa5fe090cf33a9fe5983e @ git://anongit.freedesktop.org/gfx-ci/linux
== Linux commits ==
82473beafe08 drm/i915/tgl: Add Clear Color supoort for TGL Render Decompression f872ae0f29f7 drm/framebuffer/tgl: Format modifier for Intel Gen 12 render compression with Clear Color 6e5a61ea78da Gen-12 display can decompress surfaces compressed by the media engine. 32f56db73bf2 drm/fb: Extend format_info member arrays to handle four planes 3db40490ca8f drm/i915: Skip rotated offset adjustment for unsupported modifiers 8f42a26a0fb0 drm/framebuffer: Format modifier for Intel Gen-12 media compression d752e75805e5 drm/i915: Extract framebufer CCS offset checks into a function 9d840b1281fb drm/i915/tgl: Gen-12 render decompressiona54ed04cc4d8 drm/i915: Move CCS stride alignment W/A inside intel_fb_stride_alignment dc89777e0306 drm/i915: Use intel_tile_height() instead of re-implementing fa405794ca6b drm/framebuffer: Format modifier for Intel Gen-12 render compression
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_14576/index.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx