arm64: tegra: Fix 'active-low' warning for Jetson Xavier regulator
Subsystems (2)
Jon Hunter
maintainerPATCH 1/2 arm64: tegra: Fix 'active-low' warning for Jetson Xavier regulator
Commit 4fdbfd60a3a2 ("arm64: tegra: Add PCIe slot supply information in p2972-0000 platform") added regulators for the PCIe slot on the Jetson Xavier platform. One of these regulators has an active-low enable and this commit incorrectly added an active-low specifier for the GPIO which causes the following warning to occur on boot ...
WARNING KERN regulator@3 GPIO handle specifies active low - ignored
The fixed-regulator binding does not use the active-low flag from the gpio specifier and purely relies of the presence of the 'enable-active-high' property to determine if it is active high or low (if this property is omitted). Fix this warning by setting the GPIO to active-high in the GPIO specifier. Finally, remove the 'enable-active-low' as this is not a valid property.
--- arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi +1 -2
@@ -309,9 +309,8 @@ regulator-name = "VDD_12V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_LOW>; + gpio = <&gpio TEGRA194_MAIN_GPIO(A, 1) GPIO_ACTIVE_HIGH>; regulator-boot-on; - enable-active-low; }; }; };
Signature · 1 line
2.17.1
Jon Hunter
maintainerPATCH 2/2 arm64: tegra: Fix 'active-low' warning for Jetson TX1 regulator
Commit 34993594181d ("arm64: tegra: Enable HDMI on Jetson TX1") added a regulator for HDMI on the Jetson TX1 platform. This regulator has an active high enable, but the GPIO specifier for enabling the regulator incorrectly defines it as active-low. This causes the following warning to occur on boot ...
WARNING KERN regulator@10 GPIO handle specifies active low - ignored
The fixed-regulator binding does not use the active-low flag from the gpio specifier and purely relies of the presence of the 'enable-active-high' property to determine if it is active high or low (if this property is omitted). Fix this warning by setting the GPIO to active-high in the GPIO specifier which aligns with the presense of the 'enable-active-high' property.
--- arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi +1 -1
@@ -1612,7 +1612,7 @@ regulator-name = "VDD_HDMI_5V0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&exp1 12 GPIO_ACTIVE_LOW>; + gpio = <&exp1 12 GPIO_ACTIVE_HIGH>; enable-active-high; vin-supply = <&vdd_5v0_sys>; };
Signature · 1 line
2.17.1