Skip to contentSkip to conversation

clk: jz4740: Add TCU clock

PATCH New Sasha Levin 1 participant 13 messages Sep 29, 2019

Subsystems (9)
Stable branch Documentation PCI MIPS +5 more subsystems
lore
Share & tools
lore

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/13 clk: jz4740: Add TCU clock

From: Paul Cercueil <[email protected]>

[ Upstream commit 73dd11dc1a883d4c994d729dc9984f4890001157 ]

Add the missing TCU clock to the list of clocks supplied by the CGU for the JZ4740 SoC.

---
 drivers/clk/ingenic/jz4740-cgu.c       | 6 ++++++
 include/dt-bindings/clock/jz4740-cgu.h | 1 +
 2 files changed, 7 insertions(+)
drivers/clk/ingenic/jz4740-cgu.c +6 -0
index 510fe7e0c8f1c..79f0d48ec875b 100644
@@ -211,6 +211,12 @@ static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
 		.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
 		.gate = { CGU_REG_CLKGR, 5 },
 	},
+
+	[JZ4740_CLK_TCU] = {
+		"tcu", CGU_CLK_GATE,
+		.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
+		.gate = { CGU_REG_CLKGR, 1 },
+	},
 };
 
 static void __init jz4740_cgu_init(struct device_node *np)
include/dt-bindings/clock/jz4740-cgu.h +1 -0
index 43153d3e9bd26..ff7c27bc98e37 100644
@@ -33,5 +33,6 @@
 #define JZ4740_CLK_ADC		19
 #define JZ4740_CLK_I2C		20
 #define JZ4740_CLK_AIC		21
+#define JZ4740_CLK_TCU		22
 
 #endif /* __DT_BINDINGS_CLOCK_JZ4740_CGU_H__ */
Signature · 1 line
2.20.1
author maintainer
#3 lore raw

PATCH 4/13 PCI: tegra: Fix OF node reference leak

From: Nishka Dasgupta <[email protected]>

[ Upstream commit 9e38e690ace3e7a22a81fc02652fc101efb340cf ]

Each iteration of for_each_child_of_node() executes of_node_put() on the previous node, but in some return paths in the middle of the loop of_node_put() is missing thus causing a reference leak.

Hence stash these mid-loop return values in a variable 'err' and add a new label err_node_put which executes of_node_put() on the previous node and returns 'err' on failure.

Change mid-loop return statements to point to jump to this label to fix the reference leak.

Issue found with Coccinelle.

---
 drivers/pci/host/pci-tegra.c | 22 +++++++++++++++-------
 1 file changed, 15 insertions(+), 7 deletions(-)
drivers/pci/host/pci-tegra.c +15 -7
index 8dfccf7332411..8e101b19c4d6f 100644
@@ -1898,14 +1898,15 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		err = of_pci_get_devfn(port);
 		if (err < 0) {
 			dev_err(dev, "failed to parse address: %d\n", err);
-			return err;
+			goto err_node_put;
 		}
 
 		index = PCI_SLOT(err);
 
 		if (index < 1 || index > soc->num_ports) {
 			dev_err(dev, "invalid port number: %d\n", index);
-			return -EINVAL;
+			err = -EINVAL;
+			goto err_node_put;
 		}
 
 		index--;
@@ -1914,12 +1915,13 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		if (err < 0) {
 			dev_err(dev, "failed to parse # of lanes: %d\n",
 				err);
-			return err;
+			goto err_node_put;
 		}
 
 		if (value > 16) {
 			dev_err(dev, "invalid # of lanes: %u\n", value);
-			return -EINVAL;
+			err = -EINVAL;
+			goto err_node_put;
 		}
 
 		lanes |= value << (index << 3);
@@ -1933,13 +1935,15 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		lane += value;
 
 		rp = devm_kzalloc(dev, sizeof(*rp), GFP_KERNEL);
-		if (!rp)
-			return -ENOMEM;
+		if (!rp) {
+			err = -ENOMEM;
+			goto err_node_put;
+		}
 
 		err = of_address_to_resource(port, 0, &rp->regs);
 		if (err < 0) {
 			dev_err(dev, "failed to parse address: %d\n", err);
-			return err;
+			goto err_node_put;
 		}
 
 		INIT_LIST_HEAD(&rp->list);
@@ -1966,6 +1970,10 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		return err;
 
 	return 0;
+
+err_node_put:
+	of_node_put(port);
+	return err;
 }
 
 /*
Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH 7/13 HID: apple: Fix stuck function keys when using FN

In reply to Sasha Levin

From: Joao Moreno <[email protected]>

[ Upstream commit aec256d0ecd561036f188dbc8fa7924c47a9edfd ]

This fixes an issue in which key down events for function keys would be repeatedly emitted even after the user has raised the physical key. For example, the driver fails to emit the F5 key up event when going through the following steps:
- fnmode=1: hold FN, hold F5, release FN, release F5
- fnmode=2: hold F5, hold FN, release F5, release FN

The repeated F5 key down events can be easily verified using xev.

---
 drivers/hid/hid-apple.c | 49 +++++++++++++++++++++++------------------
 1 file changed, 28 insertions(+), 21 deletions(-)
drivers/hid/hid-apple.c +28 -21
index 65a0c79f212e1..31c087e1746d6 100644
@@ -55,7 +55,6 @@ MODULE_PARM_DESC(swap_opt_cmd, "Swap the Option (\"Alt\") and Command (\"Flag\")
 struct apple_sc {
 	unsigned long quirks;
 	unsigned int fn_on;
-	DECLARE_BITMAP(pressed_fn, KEY_CNT);
 	DECLARE_BITMAP(pressed_numlock, KEY_CNT);
 };
 
@@ -182,6 +181,8 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 {
 	struct apple_sc *asc = hid_get_drvdata(hid);
 	const struct apple_key_translation *trans, *table;
+	bool do_translate;
+	u16 code = 0;
 
 	if (usage->code == KEY_FN) {
 		asc->fn_on = !!value;
@@ -190,8 +191,6 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 	}
 
 	if (fnmode) {
-		int do_translate;
-
 		if (hid->product >= USB_DEVICE_ID_APPLE_WELLSPRING4_ANSI &&
 				hid->product <= USB_DEVICE_ID_APPLE_WELLSPRING4A_JIS)
 			table = macbookair_fn_keys;
@@ -203,25 +202,33 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
 		trans = apple_find_translation (table, usage->code);
 
 		if (trans) {
-			if (test_bit(usage->code, asc->pressed_fn))
-				do_translate = 1;
-			else if (trans->flags & APPLE_FLAG_FKEY)
-				do_translate = (fnmode == 2 && asc->fn_on) ||
-					(fnmode == 1 && !asc->fn_on);
-			else
-				do_translate = asc->fn_on;
-
-			if (do_translate) {
-				if (value)
-					set_bit(usage->code, asc->pressed_fn);
-				else
-					clear_bit(usage->code, asc->pressed_fn);
-
-				input_event(input, usage->type, trans->to,
-						value);
-
-				return 1;
+			if (test_bit(trans->from, input->key))
+				code = trans->from;
+			else if (test_bit(trans->to, input->key))
+				code = trans->to;
+
+			if (!code) {
+				if (trans->flags & APPLE_FLAG_FKEY) {
+					switch (fnmode) {
+					case 1:
+						do_translate = !asc->fn_on;
+						break;
+					case 2:
+						do_translate = asc->fn_on;
+						break;
+					default:
+						/* should never happen */
+						do_translate = false;
+					}
+				} else {
+					do_translate = asc->fn_on;
+				}
+
+				code = do_translate ? trans->to : trans->from;
 			}
+
+			input_event(input, usage->type, code, value);
+			return 1;
 		}
 
 		if (asc->quirks & APPLE_NUMLOCK_EMULATION &&
Signature · 1 line
2.20.1
author maintainer
#1 lore raw

PATCH 2/13 MIPS: tlbex: Explicitly cast _PAGE_NO_EXEC to a boolean

In reply to Sasha Levin

From: Nathan Chancellor <[email protected]>

[ Upstream commit c59ae0a1055127dd3828a88e111a0db59b254104 ]

clang warns:

arch/mips/mm/tlbex.c:634:19: error: use of logical '&&' with constant operand [-Werror,-Wconstant-logical-operand]

        if (cpu_has_rixi && _PAGE_NO_EXEC) {
                         ^  ~~~~~~~~~~~~~
arch/mips/mm/tlbex.c:634:19: note: use '&' for a bitwise operation
        if (cpu_has_rixi && _PAGE_NO_EXEC) {
                         ^~
                         &
arch/mips/mm/tlbex.c:634:19: note: remove constant to silence this
warning
        if (cpu_has_rixi && _PAGE_NO_EXEC) {
                        ~^~~~~~~~~~~~~~~~

1 error generated.

Explicitly cast this value to a boolean so that clang understands we intend for this to be a non-zero value.

Fixes 00bf1c691d08 ("MIPS: tlbex: Avoid placing software PTE bits in Entry* PFN fields")
Cc Ralf Baechle <[email protected]>
Cc James Hogan <[email protected]>
Cc Nick Desaulniers <[email protected]>
---
 arch/mips/mm/tlbex.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/mips/mm/tlbex.c +1 -1
index 3cc5b2e4263c0..47d50197789be 100644
@@ -637,7 +637,7 @@ static __maybe_unused void build_convert_pte_to_entrylo(u32 **p,
 		return;
 	}
 
-	if (cpu_has_rixi && _PAGE_NO_EXEC) {
+	if (cpu_has_rixi && !!_PAGE_NO_EXEC) {
 		if (fill_includes_sw_bits) {
 			UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL));
 		} else {
Signature · 1 line
2.20.1
author maintainer
#2 lore raw

PATCH 3/13 mfd: intel-lpss: Remove D3cold delay

In reply to Sasha Levin

From: Kai-Heng Feng <[email protected]>

[ Upstream commit 76380a607ba0b28627c9b4b55cd47a079a59624b ]

Goodix touchpad may drop its first couple input events when i2c-designware-platdrv and intel-lpss it connects to took too long to runtime resume from runtime suspended state.

This issue happens becuase the touchpad has a rather small buffer to store up to 13 input events, so if the host doesn't read those events in time (i.e. runtime resume takes too long), events are dropped from the touchpad's buffer.

The bottleneck is D3cold delay it waits when transitioning from D3cold to D0, hence remove the delay to make the resume faster. I've tested some systems with intel-lpss and haven't seen any regression.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202683

---
 drivers/mfd/intel-lpss-pci.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/mfd/intel-lpss-pci.c +2 -0
index 9ff243970e93e..5b41111e62fd1 100644
@@ -39,6 +39,8 @@ static int intel_lpss_pci_probe(struct pci_dev *pdev,
 	info->mem = &pdev->resource[0];
 	info->irq = pdev->irq;
 
+	pdev->d3cold_delay = 0;
+
 	/* Probably it is enough to set this for iDMA capable devices only */
 	pci_set_master(pdev);
 
Signature · 1 line
2.20.1
author maintainer
#4 lore raw

PATCH 5/13 ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes

In reply to Sasha Levin

From: Will Deacon <[email protected]>

[ Upstream commit 834020366da9ab3fb87d1eb9a3160eb22dbed63a ]

Translation faults arising from cache maintenance instructions are rather unhelpfully reported with an FSR value where the WnR field is set to 1, indicating that the faulting access was a write. Since cache maintenance instructions on 32-bit ARM do not require any particular permissions, this can cause our private 'cacheflush' system call to fail spuriously if a translation fault is generated due to page aging when targetting a read-only VMA.

In this situation, we will return -EFAULT to userspace, although this is unfortunately suppressed by the popular '__builtin___clear_cache()' intrinsic provided by GCC, which returns void.

Although it's tempting to write this off as a userspace issue, we can actually do a little bit better on CPUs that support LPAE, even if the short-descriptor format is in use. On these CPUs, cache maintenance faults additionally set the CM field in the FSR, which we can use to suppress the write permission checks in the page fault handler and succeed in performing cache maintenance to read-only areas even in the presence of a translation fault.

---
 arch/arm/mm/fault.c | 4 ++--
 arch/arm/mm/fault.h | 1 +
 2 files changed, 3 insertions(+), 2 deletions(-)
arch/arm/mm/fault.c +2 -2
index 5ca207ada8524..2539c8f9fb3fa 100644
@@ -214,7 +214,7 @@ static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
 {
 	unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
 
-	if (fsr & FSR_WRITE)
+	if ((fsr & FSR_WRITE) && !(fsr & FSR_CM))
 		mask = VM_WRITE;
 	if (fsr & FSR_LNX_PF)
 		mask = VM_EXEC;
@@ -284,7 +284,7 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 
 	if (user_mode(regs))
 		flags |= FAULT_FLAG_USER;
-	if (fsr & FSR_WRITE)
+	if ((fsr & FSR_WRITE) && !(fsr & FSR_CM))
 		flags |= FAULT_FLAG_WRITE;
 
 	/*
arch/arm/mm/fault.h +1 -0
index afc1f84e763b2..9bc272642d55a 100644
@@ -5,6 +5,7 @@
  * Fault status register encodings.  We steal bit 31 for our own purposes.
  */
 #define FSR_LNX_PF		(1 << 31)
+#define FSR_CM			(1 << 13)
 #define FSR_WRITE		(1 << 11)
 #define FSR_FS4			(1 << 10)
 #define FSR_FS3_0		(15)
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 6/13 firmware: bcm47xx_nvram: Correct size_t printf format

In reply to Sasha Levin

From: Florian Fainelli <[email protected]>

[ Upstream commit feb4eb060c3aecc3c5076bebe699cd09f1133c41 ]

When building on a 64-bit host, we will get warnings like those:

drivers/firmware/broadcom/bcm47xx_nvram.c:103:3: note: in expansion of macro 'pr_err'
pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n", ^~~~~~
drivers/firmware/broadcom/bcm47xx_nvram.c:103:28: note: format string is defined here
pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",

                           ~^
                           %li

Use %zu instead for that purpose.

---
 drivers/firmware/broadcom/bcm47xx_nvram.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/firmware/broadcom/bcm47xx_nvram.c +2 -2
index 0b631e5b5b843..8632b952d77c5 100644
@@ -100,7 +100,7 @@ static int nvram_find_and_copy(void __iomem *iobase, u32 lim)
 		nvram_len = size;
 	}
 	if (nvram_len >= NVRAM_SPACE) {
-		pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
+		pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
 		       nvram_len, NVRAM_SPACE - 1);
 		nvram_len = NVRAM_SPACE - 1;
 	}
@@ -152,7 +152,7 @@ static int nvram_init(void)
 	    header.len > sizeof(header)) {
 		nvram_len = header.len;
 		if (nvram_len >= NVRAM_SPACE) {
-			pr_err("nvram on flash (%i bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
+			pr_err("nvram on flash (%zu bytes) is bigger than the reserved space in memory, will just copy the first %i bytes\n",
 				header.len, NVRAM_SPACE);
 			nvram_len = NVRAM_SPACE - 1;
 		}
Signature · 1 line
2.20.1
author maintainer
#10 lore raw

PATCH 11/13 hypfs: Fix error number left in struct pointer member

In reply to Sasha Levin

From: David Howells <[email protected]>

[ Upstream commit b54c64f7adeb241423cd46598f458b5486b0375e ]

In hypfs_fill_super(), if hypfs_create_update_file() fails, sbi->update_file is left holding an error number. This is passed to hypfs_kill_super() which doesn't check for this.

Fix this by not setting sbi->update_value until after we've checked for error.

Fixes 24bbb1faf3f0 ("[PATCH] s390_hypfs filesystem")
cc Martin Schwidefsky <[email protected]>
cc Heiko Carstens <[email protected]>
---
 arch/s390/hypfs/inode.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)
arch/s390/hypfs/inode.c +5 -4
index 2a17123130d30..224aeda1e8ccf 100644
@@ -267,7 +267,7 @@ static int hypfs_show_options(struct seq_file *s, struct dentry *root)
 static int hypfs_fill_super(struct super_block *sb, void *data, int silent)
 {
 	struct inode *root_inode;
-	struct dentry *root_dentry;
+	struct dentry *root_dentry, *update_file;
 	int rc = 0;
 	struct hypfs_sb_info *sbi;
 
@@ -298,9 +298,10 @@ static int hypfs_fill_super(struct super_block *sb, void *data, int silent)
 		rc = hypfs_diag_create_files(root_dentry);
 	if (rc)
 		return rc;
-	sbi->update_file = hypfs_create_update_file(root_dentry);
-	if (IS_ERR(sbi->update_file))
-		return PTR_ERR(sbi->update_file);
+	update_file = hypfs_create_update_file(root_dentry);
+	if (IS_ERR(update_file))
+		return PTR_ERR(update_file);
+	sbi->update_file = update_file;
 	hypfs_update_update(sb);
 	pr_info("Hypervisor filesystem mounted\n");
 	return 0;
Signature · 1 line
2.20.1
author maintainer
#11 lore raw

PATCH 12/13 ocfs2: wait for recovering done after direct unlock request

In reply to Sasha Levin

From: Changwei Ge <[email protected]>

[ Upstream commit 0a3775e4f883912944481cf2ef36eb6383a9cc74 ]

There is a scenario causing ocfs2 umount hang when multiple hosts are rebooting at the same time.

NODE1 NODE2 NODE3
send unlock requset to NODE2
dies
become recovery master recover NODE2
find NODE2 dead
mark resource RECOVERING
directly remove lock from grant list
calculate usage but RECOVERING marked
**miss the window of purging
clear RECOVERING

To reproduce this issue, crash a host and then umount ocfs2 from another node.

To solve this, just let unlock progress wait for recovery done.

---
 fs/ocfs2/dlm/dlmunlock.c | 23 +++++++++++++++++++----
 1 file changed, 19 insertions(+), 4 deletions(-)
fs/ocfs2/dlm/dlmunlock.c +19 -4
index 1082b2c3014be..5f2a120240e51 100644
@@ -105,7 +105,8 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm,
 	enum dlm_status status;
 	int actions = 0;
 	int in_use;
-        u8 owner;
+	u8 owner;
+	int recovery_wait = 0;
 
 	mlog(0, "master_node = %d, valblk = %d\n", master_node,
 	     flags & LKM_VALBLK);
@@ -208,9 +209,12 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm,
 		}
 		if (flags & LKM_CANCEL)
 			lock->cancel_pending = 0;
-		else
-			lock->unlock_pending = 0;
-
+		else {
+			if (!lock->unlock_pending)
+				recovery_wait = 1;
+			else
+				lock->unlock_pending = 0;
+		}
 	}
 
 	/* get an extra ref on lock.  if we are just switching
@@ -244,6 +248,17 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm,
 	spin_unlock(&res->spinlock);
 	wake_up(&res->wq);
 
+	if (recovery_wait) {
+		spin_lock(&res->spinlock);
+		/* Unlock request will directly succeed after owner dies,
+		 * and the lock is already removed from grant list. We have to
+		 * wait for RECOVERING done or we miss the chance to purge it
+		 * since the removement is much faster than RECOVERING proc.
+		 */
+		__dlm_wait_on_lockres_flags(res, DLM_LOCK_RES_RECOVERING);
+		spin_unlock(&res->spinlock);
+	}
+
 	/* let the caller's final dlm_lock_put handle the actual kfree */
 	if (actions & DLM_UNLOCK_FREE_LOCK) {
 		/* this should always be coupled with list removal */
Signature · 1 line
2.20.1
author maintainer
#12 lore raw

PATCH 13/13 kmemleak: increase DEBUG_KMEMLEAK_EARLY_LOG_SIZE default to 16K

In reply to Sasha Levin

From: Nicolas Boichat <[email protected]>

[ Upstream commit b751c52bb587ae66f773b15204ef7a147467f4c7 ]

The current default value (400) is too low on many systems (e.g. some ARM64 platform takes up 1000+ entries).

syzbot uses 16000 as default value, and has proved to be enough on beefy configurations, so let's pick that value.

This consumes more RAM on boot (each entry is 160 bytes, so in total ~2.5MB of RAM), but the memory would later be freed (early_log is __initdata).

---
 lib/Kconfig.debug | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
lib/Kconfig.debug +1 -1
index 4f561860bf41e..bc5ff3a53d4a6 100644
@@ -535,7 +535,7 @@ config DEBUG_KMEMLEAK_EARLY_LOG_SIZE
 	int "Maximum kmemleak early log entries"
 	depends on DEBUG_KMEMLEAK
 	range 200 40000
-	default 400
+	default 16000
 	help
 	  Kmemleak must track all the memory allocations to avoid
 	  reporting false positives. Since memory may be allocated or
Signature · 1 line
2.20.1
author maintainer
#8 lore raw

PATCH 9/13 ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address

In reply to Sasha Levin

From: Mike Rapoport <[email protected]>

[ Upstream commit 00d2ec1e6bd82c0538e6dd3e4a4040de93ba4fef ]

The calculation of memblock_limit in adjust_lowmem_bounds() assumes that bank 0 starts from a PMD-aligned address. However, the beginning of the first bank may be NOMAP memory and the start of usable memory will be not aligned to PMD boundary. In such case the memblock_limit will be set to the end of the NOMAP region, which will prevent any memblock allocations.

Mark the region between the end of the NOMAP area and the next PMD-aligned address as NOMAP as well, so that the usable memory will start at PMD-aligned address.

---
 arch/arm/mm/mmu.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
arch/arm/mm/mmu.c +16 -0
index f7c741358f37e..241bf898adf5b 100644
@@ -1168,6 +1168,22 @@ void __init adjust_lowmem_bounds(void)
 	 */
 	vmalloc_limit = (u64)(uintptr_t)vmalloc_min - PAGE_OFFSET + PHYS_OFFSET;
 
+	/*
+	 * The first usable region must be PMD aligned. Mark its start
+	 * as MEMBLOCK_NOMAP if it isn't
+	 */
+	for_each_memblock(memory, reg) {
+		if (!memblock_is_nomap(reg)) {
+			if (!IS_ALIGNED(reg->base, PMD_SIZE)) {
+				phys_addr_t len;
+
+				len = round_up(reg->base, PMD_SIZE) - reg->base;
+				memblock_mark_nomap(reg->base, len);
+			}
+			break;
+		}
+	}
+
 	for_each_memblock(memory, reg) {
 		phys_addr_t block_start = reg->base;
 		phys_addr_t block_end = reg->base + reg->size;
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 10/13 fat: work around race with userspace's read via blockdev while mounting

In reply to Sasha Levin

From: OGAWA Hirofumi <[email protected]>

[ Upstream commit 07bfa4415ab607e459b69bd86aa7e7602ce10b4f ]

If userspace reads the buffer via blockdev while mounting, sb_getblk()+modify can race with buffer read via blockdev.

For example,

            FS                               userspace
    bh = sb_getblk()
    modify bh->b_data
                                  read
				    ll_rw_block(bh)
				      fill bh->b_data by on-disk data
				      /* lost modified data by FS */
				      set_buffer_uptodate(bh)
    set_buffer_uptodate(bh)

Userspace should not use the blockdev while mounting though, the udev seems to be already doing this. Although I think the udev should try to avoid this, workaround the race by small overhead.

---
 fs/fat/dir.c    | 13 +++++++++++--
 fs/fat/fatent.c |  3 +++
 2 files changed, 14 insertions(+), 2 deletions(-)
fs/fat/dir.c +11 -2
index 81cecbe6d7cf6..971e369517a73 100644
@@ -1097,8 +1097,11 @@ static int fat_zeroed_cluster(struct inode *dir, sector_t blknr, int nr_used,
 			err = -ENOMEM;
 			goto error;
 		}
+		/* Avoid race with userspace read via bdev */
+		lock_buffer(bhs[n]);
 		memset(bhs[n]->b_data, 0, sb->s_blocksize);
 		set_buffer_uptodate(bhs[n]);
+		unlock_buffer(bhs[n]);
 		mark_buffer_dirty_inode(bhs[n], dir);
 
 		n++;
@@ -1155,6 +1158,8 @@ int fat_alloc_new_dir(struct inode *dir, struct timespec *ts)
 	fat_time_unix2fat(sbi, ts, &time, &date, &time_cs);
 
 	de = (struct msdos_dir_entry *)bhs[0]->b_data;
+	/* Avoid race with userspace read via bdev */
+	lock_buffer(bhs[0]);
 	/* filling the new directory slots ("." and ".." entries) */
 	memcpy(de[0].name, MSDOS_DOT, MSDOS_NAME);
 	memcpy(de[1].name, MSDOS_DOTDOT, MSDOS_NAME);
@@ -1177,6 +1182,7 @@ int fat_alloc_new_dir(struct inode *dir, struct timespec *ts)
 	de[0].size = de[1].size = 0;
 	memset(de + 2, 0, sb->s_blocksize - 2 * sizeof(*de));
 	set_buffer_uptodate(bhs[0]);
+	unlock_buffer(bhs[0]);
 	mark_buffer_dirty_inode(bhs[0], dir);
 
 	err = fat_zeroed_cluster(dir, blknr, 1, bhs, MAX_BUF_PER_PAGE);
@@ -1234,11 +1240,14 @@ static int fat_add_new_entries(struct inode *dir, void *slots, int nr_slots,
 
 			/* fill the directory entry */
 			copy = min(size, sb->s_blocksize);
+			/* Avoid race with userspace read via bdev */
+			lock_buffer(bhs[n]);
 			memcpy(bhs[n]->b_data, slots, copy);
-			slots += copy;
-			size -= copy;
 			set_buffer_uptodate(bhs[n]);
+			unlock_buffer(bhs[n]);
 			mark_buffer_dirty_inode(bhs[n], dir);
+			slots += copy;
+			size -= copy;
 			if (!size)
 				break;
 			n++;
fs/fat/fatent.c +3 -0
index a9cad9b60790b..0129d4d07a544 100644
@@ -389,8 +389,11 @@ static int fat_mirror_bhs(struct super_block *sb, struct buffer_head **bhs,
 				err = -ENOMEM;
 				goto error;
 			}
+			/* Avoid race with userspace read via bdev */
+			lock_buffer(c_bh);
 			memcpy(c_bh->b_data, bhs[n]->b_data, sb->s_blocksize);
 			set_buffer_uptodate(c_bh);
+			unlock_buffer(c_bh);
 			mark_buffer_dirty_inode(c_bh, sbi->fat_inode);
 			if (sb->s_flags & MS_SYNCHRONOUS)
 				err = sync_dirty_buffer(c_bh);
Signature · 1 line
2.20.1
author maintainer
#7 lore raw

PATCH 8/13 security: smack: Fix possible null-pointer dereferences in smack_socket_sock_rcv_skb()

In reply to Sasha Levin

From: Jia-Ju Bai <[email protected]>

[ Upstream commit 3f4287e7d98a2954f20bf96c567fdffcd2b63eb9 ]

In smack_socket_sock_rcv_skb(), there is an if statement on line 3920 to check whether skb is NULL:

    if (skb && skb->secmark != 0)

This check indicates skb can be NULL in some cases.

But on lines 3931 and 3932, skb is used:

    ad.a.u.net->netif = skb->skb_iif;
    ipv6_skb_to_auditdata(skb, &ad.a, NULL);

Thus, possible null-pointer dereferences may occur when skb is NULL.

To fix these possible bugs, an if statement is added to check skb.

These bugs are found by a static analysis tool STCheck written by us.

---
 security/smack/smack_lsm.c | 2 ++
 1 file changed, 2 insertions(+)
security/smack/smack_lsm.c +2 -0
index aeb3ba70f9077..19d1702aa9856 100644
@@ -4037,6 +4037,8 @@ static int smack_socket_sock_rcv_skb(struct sock *sk, struct sk_buff *skb)
 			skp = smack_ipv6host_label(&sadd);
 		if (skp == NULL)
 			skp = smack_net_ambient;
+		if (skb == NULL)
+			break;
 #ifdef CONFIG_AUDIT
 		smk_ad_init_net(&ad, __func__, LSM_AUDIT_DATA_NET, &net);
 		ad.a.u.net->family = family;
Signature · 1 line
2.20.1