More Tacoma devicetree updates
Subsystems (2)
PATCH 1/2 ARM: dts: Aspeed: Tacoma: Add gpio-key definitions
In reply to Eddie JamesAdd gpio-keys for various signals on Tacoma.
--- arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 60 +++++++++++++++++++++ 1 file changed, 60 insertions(+)
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +60 -0
@@ -3,6 +3,7 @@ /dts-v1/; #include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> #include <dt-bindings/leds/leds-pca955x.h> / {
@@ -33,6 +34,65 @@ reg = <0xba000000 0x2000000>; /* 32M */ }; }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Q, 7)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio0 ASPEED_GPIO(E, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(E, 3)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(H, 3)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(E, 5)>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + }; }; &fmc {
Signature · 1 line
2.23.0
PATCH 2/2 ARM: dts: Aspeed: Tacoma: Add watchdog definitions
In reply to Eddie JamesThe first watchdog on Tacoma is wired to the fans. Use the second watchdog as the kernel/system watchdog.
--- arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +14 -0
@@ -524,3 +524,17 @@ memory-region = <&flash_memory>; flash = <&spi1>; }; + +&wdt1 { + aspeed,reset-type = "none"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; +}; + +&wdt2 { + status = "okay"; +};
Signature · 1 line
2.23.0
cover More Tacoma devicetree updates
Some updates for gpios and watchdogs. These have been tested on several Tacoma systems.
Eddie James (2):
ARM: dts: Aspeed: Tacoma: Add gpio-key definitions
ARM: dts: Aspeed: Tacoma: Add watchdog definitions
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 74 +++++++++++++++++++++ 1 file changed, 74 insertions(+)
Signature · 1 line
2.23.0
Re: [PATCH linux dev-5.3 1/2] ARM: dts: Aspeed: Tacoma: Add gpio-key definitions
In reply to Eddie JamesQuoted 3 lines · Eddie James
Add gpio-keys for various signals on Tacoma.
Signed-off-by Eddie James <[email protected]>
Quoted 87 lines
--- arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 60 +++++++++++++++++++++ 1 file changed, 60 insertions(+)arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts +60
-0@@ -3,6 +3,7 @@ /dts-v1/; #include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> #include <dt-bindings/leds/leds-pca955x.h> / {@@ -33,6 +34,65 @@ reg = <0xba000000 0x2000000>; /* 32M */ }; }; + + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Q, 7)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio0 ASPEED_GPIO(E, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(E, 3)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(H, 3)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(E, 5)>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <1000>; + + fan0-presence { + label = "fan0-presence"; + gpios = <&pca0 4 GPIO_ACTIVE_LOW>; + linux,code = <4>; + }; + + fan1-presence { + label = "fan1-presence"; + gpios = <&pca0 5 GPIO_ACTIVE_LOW>; + linux,code = <5>; + }; + + fan2-presence { + label = "fan2-presence"; + gpios = <&pca0 6 GPIO_ACTIVE_LOW>; + linux,code = <6>; + }; + + fan3-presence { + label = "fan3-presence"; + gpios = <&pca0 7 GPIO_ACTIVE_LOW>; + linux,code = <7>; + }; + }; }; &fmc {Signature · 1 line
2.23.0
Re: [PATCH linux dev-5.3 2/2] ARM: dts: Aspeed: Tacoma: Add watchdog definitions
In reply to Eddie JamesQuoted 4 lines · Eddie James
The first watchdog on Tacoma is wired to the fans. Use the second watchdog as the kernel/system watchdog.
Signed-off-by Eddie James <[email protected]>