Skip to contentSkip to conversation

.travis.yml: Test the release tarball

PATCH In review Philippe Mathieu-Daudé 2 participants 4 messages Oct 7, 2019 – Oct 18, 2019

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 .travis.yml: Test the release tarball

Add a job to generate the release tarball and build/install few QEMU targets from it.

Ideally we should build the 'efi' target from the 'roms' directory, but it is too time consuming.

This job is only triggered when a tag starting with 'v' is pushed, which is the case with release candidate tags.

---
v2: addressed mdroth comments

This job is quick enough: Ran for 16 min 33 sec
https://travis-ci.org/philmd/qemu/jobs/594565293

Based-on: <[email protected]> pull request including "Fix tarball builds of UEFI/EDK2 firmware"
https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg02734.html

---
 .travis.yml | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
.travis.yml +23 -0
index d0b9e099b9..d881ea0849 100644
@@ -339,3 +339,26 @@ matrix:
         - CONFIG="--target-list=xtensa-softmmu,arm-softmmu,aarch64-softmmu,alpha-softmmu"
         - TEST_CMD="make -j3 check-tcg V=1"
         - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
+
+
+    # Release builds
+    # The make-release script expect a QEMU version, so our tag must start with a 'v'.
+    # This is the case when release candidate tags are created.
+    - if: tag IS present AND tag =~ /^v\d+\.\d+(\.\d+)?(-\S*)?$/
+      env:
+        # We want to build from the release tarball
+        - BUILD_DIR="release/build/dir" SRC_DIR="../../.."
+        - BASE_CONFIG="--prefix=$PWD/dist"
+        - CONFIG="--target-list=x86_64-softmmu,aarch64-softmmu,armeb-linux-user,ppc-linux-user"
+        - TEST_CMD="make install -j3"
+        - QEMU_VERSION="${TRAVIS_TAG:1}"
+        - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
+      before_script:
+        - command -v ccache && ccache --zero-stats
+        - mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR}
+      script:
+        - make -C ${SRC_DIR} qemu-${QEMU_VERSION}.tar.bz2
+        - ls -l ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2
+        - tar -xf ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2 && cd qemu-${QEMU_VERSION}
+        - ./configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; }
+        - make install
Signature · 1 line
2.21.0
#1 lore raw

ping?

Quoted 55 lines · Philippe Mathieu-Daudé

Add a job to generate the release tarball and build/install few QEMU targets from it.

Ideally we should build the 'efi' target from the 'roms' directory, but it is too time consuming.

This job is only triggered when a tag starting with 'v' is pushed, which is the case with release candidate tags.

---
v2: addressed mdroth comments

This job is quick enough: Ran for 16 min 33 sec
https://travis-ci.org/philmd/qemu/jobs/594565293

Based-on: <[email protected]> pull request including "Fix tarball builds of UEFI/EDK2 firmware"
https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg02734.html

---
  .travis.yml | 23 +++++++++++++++++++++++
  1 file changed, 23 insertions(+)
.travis.yml +23 -0
index d0b9e099b9..d881ea0849 100644
@@ -339,3 +339,26 @@ matrix:
          - CONFIG="--target-list=xtensa-softmmu,arm-softmmu,aarch64-softmmu,alpha-softmmu"
          - TEST_CMD="make -j3 check-tcg V=1"
          - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
+
+
+    # Release builds
+    # The make-release script expect a QEMU version, so our tag must start with a 'v'.
+    # This is the case when release candidate tags are created.
+    - if: tag IS present AND tag =~ /^v\d+\.\d+(\.\d+)?(-\S*)?$/
+      env:
+        # We want to build from the release tarball
+        - BUILD_DIR="release/build/dir" SRC_DIR="../../.."
+        - BASE_CONFIG="--prefix=$PWD/dist"
+        - CONFIG="--target-list=x86_64-softmmu,aarch64-softmmu,armeb-linux-user,ppc-linux-user"
+        - TEST_CMD="make install -j3"
+        - QEMU_VERSION="${TRAVIS_TAG:1}"
+        - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
+      before_script:
+        - command -v ccache && ccache --zero-stats
+        - mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR}
+      script:
+        - make -C ${SRC_DIR} qemu-${QEMU_VERSION}.tar.bz2
+        - ls -l ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2
+        - tar -xf ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2 && cd qemu-${QEMU_VERSION}
+        - ./configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; }
+        - make install
#2 lore raw
Quoted 1 line · Philippe Mathieu-Daudé

ping?

I've pulled it into testing/next to play but I was wondering if it was worth it given how infrequently it would run...

Quoted 43 lines · Philippe Mathieu-Daudé
Quoted 41 lines

Add a job to generate the release tarball and build/install few QEMU targets from it.
Ideally we should build the 'efi' target from the 'roms' directory, but it is too time consuming.
This job is only triggered when a tag starting with 'v' is pushed, which is the case with release candidate tags.

---
v2: addressed mdroth comments
This job is quick enough: Ran for 16 min 33 sec
https://travis-ci.org/philmd/qemu/jobs/594565293
Based-on: <[email protected]> pull request including "Fix tarball builds of UEFI/EDK2 firmware"
https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg02734.html

---
  .travis.yml | 23 +++++++++++++++++++++++
  1 file changed, 23 insertions(+)
.travis.yml +16 -0
index d0b9e099b9..d881ea0849 100644
@@ -339,3 +339,26 @@ matrix:
          - CONFIG="--target-list=xtensa-softmmu,arm-softmmu,aarch64-softmmu,alpha-softmmu"
          - TEST_CMD="make -j3 check-tcg V=1"
          - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
+
+
+    # Release builds
+    # The make-release script expect a QEMU version, so our tag must start with a 'v'.
+    # This is the case when release candidate tags are created.
+    - if: tag IS present AND tag =~ /^v\d+\.\d+(\.\d+)?(-\S*)?$/
+      env:
+        # We want to build from the release tarball
+        - BUILD_DIR="release/build/dir" SRC_DIR="../../.."
+        - BASE_CONFIG="--prefix=$PWD/dist"
+        - CONFIG="--target-list=x86_64-softmmu,aarch64-softmmu,armeb-linux-user,ppc-linux-user"
+        - TEST_CMD="make install -j3"
+        - QEMU_VERSION="${TRAVIS_TAG:1}"
+        - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
+      before_script:
+        - command -v ccache && ccache --zero-stats
Quoted 8 lines

.travis.yml matrix: · line 364

Quoted 8 lines
.travis.yml +7 -0
+        - mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR}
+      script:
+        - make -C ${SRC_DIR} qemu-${QEMU_VERSION}.tar.bz2
+        - ls -l ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2
+        - tar -xf ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2 && cd qemu-${QEMU_VERSION}
+        - ./configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; }
+        - make install

--
Alex Bennée

#3 lore raw
Quoted 7 lines · Alex Bennée
Quoted 1 line · Philippe Mathieu-Daudé

ping?

I've pulled it into testing/next to play but I was wondering if it was worth it given how infrequently it would run...

Well, it will run when we tag release candidate and catch eventual bugs before we tag the final release. The idea is to avoid the same mistake we did with the last release that Bruce spotted.

Quoted 55 lines
Quoted 42 lines · Philippe Mathieu-Daudé
Quoted 41 lines

Add a job to generate the release tarball and build/install few QEMU targets from it.
Ideally we should build the 'efi' target from the 'roms' directory, but it is too time consuming.
This job is only triggered when a tag starting with 'v' is pushed, which is the case with release candidate tags.

---
v2: addressed mdroth comments
This job is quick enough: Ran for 16 min 33 sec
https://travis-ci.org/philmd/qemu/jobs/594565293
Based-on: <[email protected]> pull request including "Fix tarball builds of UEFI/EDK2 firmware"
https://lists.gnu.org/archive/html/qemu-devel/2019-09/msg02734.html

---
   .travis.yml | 23 +++++++++++++++++++++++
   1 file changed, 23 insertions(+)
.travis.yml +16 -0
index d0b9e099b9..d881ea0849 100644
@@ -339,3 +339,26 @@ matrix:
           - CONFIG="--target-list=xtensa-softmmu,arm-softmmu,aarch64-softmmu,alpha-softmmu"
           - TEST_CMD="make -j3 check-tcg V=1"
           - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
+
+
+    # Release builds
+    # The make-release script expect a QEMU version, so our tag must start with a 'v'.
+    # This is the case when release candidate tags are created.
+    - if: tag IS present AND tag =~ /^v\d+\.\d+(\.\d+)?(-\S*)?$/
+      env:
+        # We want to build from the release tarball
+        - BUILD_DIR="release/build/dir" SRC_DIR="../../.."
+        - BASE_CONFIG="--prefix=$PWD/dist"
+        - CONFIG="--target-list=x86_64-softmmu,aarch64-softmmu,armeb-linux-user,ppc-linux-user"
+        - TEST_CMD="make install -j3"
+        - QEMU_VERSION="${TRAVIS_TAG:1}"
+        - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-default"
+      before_script:
+        - command -v ccache && ccache --zero-stats
Quoted 8 lines

.travis.yml matrix: · line 364

Quoted 8 lines
.travis.yml +7 -0
+        - mkdir -p ${BUILD_DIR} && cd ${BUILD_DIR}
+      script:
+        - make -C ${SRC_DIR} qemu-${QEMU_VERSION}.tar.bz2
+        - ls -l ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2
+        - tar -xf ${SRC_DIR}/qemu-${QEMU_VERSION}.tar.bz2 && cd qemu-${QEMU_VERSION}
+        - ./configure ${BASE_CONFIG} ${CONFIG} || { cat config.log && exit 1; }
+        - make install

--
Alex Bennée