ipmi: use %*ph to print small buffer
PATCH 1/1 ipmi: use %*ph to print small buffer
From: Andy Shevchenko <[email protected]>
Use %*ph format to print small buffer as hex string.
The change is safe since the specifier can handle up to 64 bytes and taking into account the buffer size of 100 bytes on stack the function has never been used to dump more than 32 bytes. Note, this also avoids potential buffer overflow if the length of the input buffer is bigger.
--- drivers/char/ipmi/ipmi_msghandler.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-)
drivers/char/ipmi/ipmi_msghandler.c +1 -8
@@ -48,14 +48,7 @@ static int handle_one_recv_msg(struct ipmi_smi *intf,static void ipmi_debug_msg (const char *title,unsigned char *data,unsigned int len) { -int i, pos; -char buf[100 ]; - - pos =snprintf (buf,sizeof (buf),"%s: " , title); -for (i =0 ; i < len; i++) - pos +=snprintf (buf + pos,sizeof (buf) - pos, -" %2.2x" , data[i]); -pr_debug ("%s\n" , buf); +pr_debug ("%s: %*ph\n" , title, len, buf); }#else static void ipmi_debug_msg(const char *title, unsigned char *data,
Signature · 1 line
2.23.0
Quoted 6 lines · Andy Shevchenko
Use %*ph format to print small buffer as hex string.
The change is safe since the specifier can handle up to 64 bytes and taking into account the buffer size of 100 bytes on stack the function has never been used to dump more than 32 bytes. Note, this also avoids potential buffer overflow if the length of the input buffer is bigger.
[]
drivers/char/ipmi/ipmi_msghandler.c
Quoted 1 line
drivers/char/ipmi/ipmi_msghandler.c +0
-0
[]
Quoted 6 lines
drivers/char/ipmi/ipmi_msghandler.c +0
-2@@ -48,14 +48,7 @@ static int handle_one_recv_msg(struct ipmi_smi *intf,static void ipmi_debug_msg (const char *title,unsigned char *data,unsigned int len) { -int i, pos; -char buf[100 ];
drivers/char/ipmi/ipmi_msghandler.c static int handle_one_recv_msg(struct ipmi_smi *intf, · line 54
Quoted 10 lines
drivers/char/ipmi/ipmi_msghandler.c +1
-6- - pos =snprintf (buf,sizeof (buf),"%s: " , title); -for (i =0 ; i < len; i++) - pos +=snprintf (buf + pos,sizeof (buf) - pos, -" %2.2x" , data[i]); -pr_debug ("%s\n" , buf); +pr_debug ("%s: %*ph\n" , title, len, buf); }#else static void ipmi_debug_msg(const char *title, unsigned char *data,
Now you might as well remove the #ifdef DEBUG above this and the empty function in the #else too.
Quoted 21 lines · Joe Perches
Quoted 6 lines · Andy Shevchenko
Use %*ph format to print small buffer as hex string.
The change is safe since the specifier can handle up to 64 bytes and taking into account the buffer size of 100 bytes on stack the function has never been used to dump more than 32 bytes. Note, this also avoids potential buffer overflow if the length of the input buffer is bigger.
[]
drivers/char/ipmi/ipmi_msghandler.c
Quoted 1 line
drivers/char/ipmi/ipmi_msghandler.c +0
-0[]
Quoted 11 lines
drivers/char/ipmi/ipmi_msghandler.c +0
-7@@ -48,14 +48,7 @@ static int handle_one_recv_msg(struct ipmi_smi *intf,static void ipmi_debug_msg (const char *title,unsigned char *data,unsigned int len) { -int i, pos; -char buf[100 ]; - - pos =snprintf (buf,sizeof (buf),"%s: " , title); -for (i =0 ; i < len; i++) - pos +=snprintf (buf + pos,sizeof (buf) - pos, -" %2.2x" , data[i]);
Quoted 8 lines
drivers/char/ipmi/ipmi_msghandler.c static int handle_one_recv_msg(struct ipmi_smi *intf, · line 54
Quoted 5 lines
drivers/char/ipmi/ipmi_msghandler.c +1
-1-pr_debug ("%s\n" , buf); +pr_debug ("%s: %*ph\n" , title, len, buf); }#else static void ipmi_debug_msg(const char *title, unsigned char *data,Now you might as well remove the #ifdef DEBUG above this and the empty function in the #else too.
It's up to maintainer.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Quoted 31 lines · Andy Shevchenko
Quoted 21 lines · Joe Perches
Quoted 6 lines · Andy Shevchenko
Use %*ph format to print small buffer as hex string.
The change is safe since the specifier can handle up to 64 bytes and taking into account the buffer size of 100 bytes on stack the function has never been used to dump more than 32 bytes. Note, this also avoids potential buffer overflow if the length of the input buffer is bigger.
[]
drivers/char/ipmi/ipmi_msghandler.c
Quoted 1 line
drivers/char/ipmi/ipmi_msghandler.c +0
-0[]
Quoted 11 lines
drivers/char/ipmi/ipmi_msghandler.c +0
-7@@ -48,14 +48,7 @@ static int handle_one_recv_msg(struct ipmi_smi *intf,static void ipmi_debug_msg (const char *title,unsigned char *data,unsigned int len) { -int i, pos; -char buf[100 ]; - - pos =snprintf (buf,sizeof (buf),"%s: " , title); -for (i =0 ; i < len; i++) - pos +=snprintf (buf + pos,sizeof (buf) - pos, -" %2.2x" , data[i]);Quoted 8 lines
drivers/char/ipmi/ipmi_msghandler.c static int handle_one_recv_msg(struct ipmi_smi *intf, · line 54
Quoted 5 lines
drivers/char/ipmi/ipmi_msghandler.c +1
-1-pr_debug ("%s\n" , buf); +pr_debug ("%s: %*ph\n" , title, len, buf); }#else static void ipmi_debug_msg(const char *title, unsigned char *data,Now you might as well remove the #ifdef DEBUG above this and the empty function in the #else too.
Quoted 1 line
It's up to maintainer.
That's like suggesting any function with a single pr_debug should have another duplicative empty function without.
Using code like the below is not good form as it's prone to defects when the arguments in one block is changed but not the other.
Also the first form doesn't work with dynamic debug.
#ifdef DEBUG
void debug_print(...)
{
pr_debug(...);
}#else
void debug_print(...)
{
}
#endif
Quoted 5 lines · Joe Perches
Quoted 4 lines · Andy Shevchenko
Quoted 3 lines · Joe Perches
Quoted 1 line · Andy Shevchenko
static void ipmi_debug_msg(const char *title, unsigned char *data,
...
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
drivers/char/ipmi/ipmi_msghandler.c +1
-0+pr_debug ("%s: %*ph\n" , title, len, buf);
...
Quoted 8 lines
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
#else
static void ipmi_debug_msg(const char *title, unsigned char *data,Now you might as well remove the #ifdef DEBUG above this and the empty function in the #else too.
It's up to maintainer.
Quoted 8 lines
That's like suggesting any function with a single
pr_debugshould have another duplicative empty function without.Using code like the below is not good form as it's prone to defects when the arguments in one block is changed but not the other.
Also the first form doesn't work with dynamic debug.
I'm surprised to see my name in To:. I guess you intended to explain this to Corey. I'm fine with either, since I have no idea what is in the IPMI going on.
Signature · 2 lines
With Best Regards, Andy Shevchenko
PATCH 1/1 ipmi: Convert ipmi_debug_msg to pr_debug and use %*ph
In reply to Joe PerchesUsing %*ph format to print small buffers as hex string reduces overall object size and allows the removal of the two variants of ipmi_debug_msg.
This also removes unnecessary duplicate colons from output when enabled by #DEBUG or newly possible CONFIG_DYNAMIC_DEBUG.
--- drivers/char/ipmi/ipmi_msghandler.c | 29 ++++++----------------------- 1 file changed, 6 insertions(+), 23 deletions(-)
drivers/char/ipmi/ipmi_msghandler.c +6 -23
@@ -44,25 +44,6 @@ static void need_waiter(struct ipmi_smi *intf);static int handle_one_recv_msg (struct ipmi_smi *intf,struct ipmi_smi_msg *msg); -#ifdef DEBUG -static void ipmi_debug_msg (const char *title,unsigned char *data, -unsigned int len) -{ -int i, pos; -char buf[100 ]; - - pos =snprintf (buf,sizeof (buf),"%s: " , title); -for (i =0 ; i < len; i++) - pos +=snprintf (buf + pos,sizeof (buf) - pos, -" %2.2x" , data[i]); -pr_debug ("%s\n" , buf); -} -#else -static void ipmi_debug_msg (const char *title,unsigned char *data, -unsigned int len) -{ } -#endif -static bool initialized;static bool drvregistered;
@@ -2267,7 +2248,8 @@ static int i_ipmi_request(struct ipmi_user *user,ipmi_free_smi_msg (smi_msg);ipmi_free_recv_msg (recv_msg); }else { -ipmi_debug_msg ("Send" , smi_msg->data, smi_msg->data_size); +pr_debug ("%s: %*ph\n" , +"Send" , smi_msg->data, smi_msg->data_size);smi_send (intf, intf->handlers, smi_msg, priority); }
@@ -3730,7 +3712,8 @@ static int handle_ipmb_get_msg_cmd(struct ipmi_smi *intf, msg->data[10 ] =ipmb_checksum (&msg->data[6 ],4 ); msg->data_size =11 ; -ipmi_debug_msg ("Invalid command:" , msg->data, msg->data_size); +pr_debug ("%s: %*ph\n" , +"Invalid command" , msg->data, msg->data_size);rcu_read_lock ();if (!intf->in_shutdown) {
@@ -4217,7 +4200,7 @@ static int handle_one_recv_msg(struct ipmi_smi *intf,int requeue;int chan; -ipmi_debug_msg ("Recv:" , msg->rsp, msg->rsp_size); +pr_debug ("%s: %*ph\n" ,"Recv" , msg->rsp, msg->rsp_size);if ((msg->data_size >=2 ) && (msg->data[0] == (IPMI_NETFN_APP_REQUEST << 2))
@@ -4576,7 +4559,7 @@ smi_from_recv_msg(struct ipmi_smi *intf, struct ipmi_recv_msg *recv_msg, smi_msg->data_size = recv_msg->msg.data_len; smi_msg->msgid =STORE_SEQ_IN_MSGID (seq, seqid); -ipmi_debug_msg ("Resend: " , smi_msg->data, smi_msg->data_size); +pr_debug ("%s: %*ph\n" ,"Resend" , smi_msg->data, smi_msg->data_size);return smi_msg; }
Re: [PATCH] ipmi: Convert ipmi_debug_msg to pr_debug and use %*ph
Quoted 6 lines · Joe Perches
Using %*ph format to print small buffers as hex string reduces overall object size and allows the removal of the two variants of
ipmi_debug_msg.This also removes unnecessary duplicate colons from output when enabled by #DEBUG or newly possible
CONFIG_DYNAMIC_DEBUG.
I have sent v2 with slightly better approach (no need to have %s).
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH] ipmi: Convert ipmi_debug_msg to pr_debug and use %*ph
Quoted 9 lines · Andy Shevchenko
Quoted 6 lines · Joe Perches
Using %*ph format to print small buffers as hex string reduces overall object size and allows the removal of the two variants of
ipmi_debug_msg.This also removes unnecessary duplicate colons from output when enabled by #DEBUG or newly possible
CONFIG_DYNAMIC_DEBUG.I have sent v2 with slightly better approach (no need to have %s).
Great, yours has the advantage of actually compiling properly. I did not reverse the arguments after the format. oops.
kbuild test robot
build botRe: [PATCH] ipmi: Convert ipmi_debug_msg to pr_debug and use %*ph
In reply to Joe PerchesI love your patch! Perhaps something to improve:
Hi Joe,
I love your patch! Perhaps something to improve:
[auto build test WARNING on char-misc/char-misc-testing]
[cannot apply to v5.4-rc2 next-20191011]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
url: https://github.com/0day-ci/linux/commits/Joe-Perches/ipmi-Convert-ipmi_debug_msg-to-pr_debug-and-use-ph/20191014-051352
config: x86_64-kexec (attached as .config)
compiler: gcc-7 (Debian 7.4.0-13) 7.4.0
reproduce:
# save the attached .config to linux build tree
make ARCH=x86_64 If you fix the issue, kindly add following tag
All warnings (new ones prefixed by >>):
In file included from include/linux/kernel.h:15:0,
from include/linux/list.h:9,
from include/linux/module.h:9,
from drivers/char/ipmi/ipmi_msghandler.c:17:
drivers/char/ipmi/ipmi_msghandler.c: In function 'i_ipmi_request':
>> include/linux/kern_levels.h:5:18: warning: field width specifier '*' expects argument of type 'int', but argument 4 has type 'unsigned char *' [-Wformat=]
#define KERN_SOH "\001" /* ASCII Start Of Header */
^
include/linux/printk.h:137:10: note: in definition of macro 'no_printk'
printk(fmt, ##__VA_ARGS__); \
^~~
include/linux/kern_levels.h:15:20: note: in expansion of macro 'KERN_SOH'
#define KERN_DEBUG KERN_SOH "7" /* debug-level messages */
^~~~~~~~
include/linux/printk.h:342:12: note: in expansion of macro 'KERN_DEBUG'
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:2251:3: note: in expansion of macro 'pr_debug'
pr_debug("%s: %*ph\n",
^~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:2251:18: note: format string is defined here
pr_debug("%s: %*ph\n",
~^~
In file included from include/linux/kernel.h:15:0,
from include/linux/list.h:9,
from include/linux/module.h:9,
from drivers/char/ipmi/ipmi_msghandler.c:17:
>> include/linux/kern_levels.h:5:18: warning: format '%p' expects argument of type 'void *', but argument 5 has type 'int' [-Wformat=]
#define KERN_SOH "\001" /* ASCII Start Of Header */
^
include/linux/printk.h:137:10: note: in definition of macro 'no_printk'
printk(fmt, ##__VA_ARGS__); \
^~~
include/linux/kern_levels.h:15:20: note: in expansion of macro 'KERN_SOH'
#define KERN_DEBUG KERN_SOH "7" /* debug-level messages */
^~~~~~~~
include/linux/printk.h:342:12: note: in expansion of macro 'KERN_DEBUG'
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:2251:3: note: in expansion of macro 'pr_debug'
pr_debug("%s: %*ph\n",
^~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:2251:19: note: format string is defined here
pr_debug("%s: %*ph\n",
~~^
%*d
In file included from include/linux/kernel.h:15:0,
from include/linux/list.h:9,
from include/linux/module.h:9,
from drivers/char/ipmi/ipmi_msghandler.c:17:
drivers/char/ipmi/ipmi_msghandler.c: In function 'handle_ipmb_get_msg_cmd':
>> include/linux/kern_levels.h:5:18: warning: field width specifier '*' expects argument of type 'int', but argument 4 has type 'unsigned char *' [-Wformat=]
#define KERN_SOH "\001" /* ASCII Start Of Header */
^
include/linux/printk.h:137:10: note: in definition of macro 'no_printk'
printk(fmt, ##__VA_ARGS__); \
^~~
include/linux/kern_levels.h:15:20: note: in expansion of macro 'KERN_SOH'
#define KERN_DEBUG KERN_SOH "7" /* debug-level messages */
^~~~~~~~
include/linux/printk.h:342:12: note: in expansion of macro 'KERN_DEBUG'
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:3715:3: note: in expansion of macro 'pr_debug'
pr_debug("%s: %*ph\n",
^~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:3715:18: note: format string is defined here
pr_debug("%s: %*ph\n",
~^~
In file included from include/linux/kernel.h:15:0,
from include/linux/list.h:9,
from include/linux/module.h:9,
from drivers/char/ipmi/ipmi_msghandler.c:17:
>> include/linux/kern_levels.h:5:18: warning: format '%p' expects argument of type 'void *', but argument 5 has type 'int' [-Wformat=]
#define KERN_SOH "\001" /* ASCII Start Of Header */
^
include/linux/printk.h:137:10: note: in definition of macro 'no_printk'
printk(fmt, ##__VA_ARGS__); \
^~~
include/linux/kern_levels.h:15:20: note: in expansion of macro 'KERN_SOH'
#define KERN_DEBUG KERN_SOH "7" /* debug-level messages */
^~~~~~~~
include/linux/printk.h:342:12: note: in expansion of macro 'KERN_DEBUG'
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:3715:3: note: in expansion of macro 'pr_debug'
pr_debug("%s: %*ph\n",
^~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:3715:19: note: format string is defined here
pr_debug("%s: %*ph\n",
~~^
%*d
In file included from include/linux/kernel.h:15:0,
from include/linux/list.h:9,
from include/linux/module.h:9,
from drivers/char/ipmi/ipmi_msghandler.c:17:
drivers/char/ipmi/ipmi_msghandler.c: In function 'handle_one_recv_msg':
>> include/linux/kern_levels.h:5:18: warning: field width specifier '*' expects argument of type 'int', but argument 4 has type 'unsigned char *' [-Wformat=]
#define KERN_SOH "\001" /* ASCII Start Of Header */
^
include/linux/printk.h:137:10: note: in definition of macro 'no_printk'
printk(fmt, ##__VA_ARGS__); \
^~~
include/linux/kern_levels.h:15:20: note: in expansion of macro 'KERN_SOH'
#define KERN_DEBUG KERN_SOH "7" /* debug-level messages */
^~~~~~~~
include/linux/printk.h:342:12: note: in expansion of macro 'KERN_DEBUG'
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:4203:2: note: in expansion of macro 'pr_debug'
pr_debug("%s: %*ph\n", "Recv", msg->rsp, msg->rsp_size);
^~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:4203:17: note: format string is defined here
pr_debug("%s: %*ph\n", "Recv", msg->rsp, msg->rsp_size);
~^~
In file included from include/linux/kernel.h:15:0,
from include/linux/list.h:9,
from include/linux/module.h:9,
from drivers/char/ipmi/ipmi_msghandler.c:17:
>> include/linux/kern_levels.h:5:18: warning: format '%p' expects argument of type 'void *', but argument 5 has type 'int' [-Wformat=]
#define KERN_SOH "\001" /* ASCII Start Of Header */
^
include/linux/printk.h:137:10: note: in definition of macro 'no_printk'
printk(fmt, ##__VA_ARGS__); \
^~~
include/linux/kern_levels.h:15:20: note: in expansion of macro 'KERN_SOH'
#define KERN_DEBUG KERN_SOH "7" /* debug-level messages */
^~~~~~~~
include/linux/printk.h:342:12: note: in expansion of macro 'KERN_DEBUG'
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:4203:2: note: in expansion of macro 'pr_debug'
pr_debug("%s: %*ph\n", "Recv", msg->rsp, msg->rsp_size);
^~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:4203:18: note: format string is defined here
pr_debug("%s: %*ph\n", "Recv", msg->rsp, msg->rsp_size);
~~^
%*d
In file included from include/linux/kernel.h:15:0,
from include/linux/list.h:9,
from include/linux/module.h:9,
from drivers/char/ipmi/ipmi_msghandler.c:17:
drivers/char/ipmi/ipmi_msghandler.c: In function 'smi_from_recv_msg':
>> include/linux/kern_levels.h:5:18: warning: field width specifier '*' expects argument of type 'int', but argument 4 has type 'unsigned char *' [-Wformat=]
#define KERN_SOH "\001" /* ASCII Start Of Header */
^
include/linux/printk.h:137:10: note: in definition of macro 'no_printk'
printk(fmt, ##__VA_ARGS__); \
^~~
include/linux/kern_levels.h:15:20: note: in expansion of macro 'KERN_SOH'
#define KERN_DEBUG KERN_SOH "7" /* debug-level messages */
^~~~~~~~
include/linux/printk.h:342:12: note: in expansion of macro 'KERN_DEBUG'
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:4562:2: note: in expansion of macro 'pr_debug'
pr_debug("%s: %*ph\n", "Resend", smi_msg->data, smi_msg->data_size);
^~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:4562:17: note: format string is defined here
pr_debug("%s: %*ph\n", "Resend", smi_msg->data, smi_msg->data_size);
~^~
In file included from include/linux/kernel.h:15:0,
from include/linux/list.h:9,
from include/linux/module.h:9,
from drivers/char/ipmi/ipmi_msghandler.c:17:
>> include/linux/kern_levels.h:5:18: warning: format '%p' expects argument of type 'void *', but argument 5 has type 'int' [-Wformat=]
#define KERN_SOH "\001" /* ASCII Start Of Header */
^
include/linux/printk.h:137:10: note: in definition of macro 'no_printk'
printk(fmt, ##__VA_ARGS__); \
^~~
include/linux/kern_levels.h:15:20: note: in expansion of macro 'KERN_SOH'
#define KERN_DEBUG KERN_SOH "7" /* debug-level messages */
^~~~~~~~
include/linux/printk.h:342:12: note: in expansion of macro 'KERN_DEBUG'
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
^~~~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:4562:2: note: in expansion of macro 'pr_debug'
pr_debug("%s: %*ph\n", "Resend", smi_msg->data, smi_msg->data_size);
^~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:4562:18: note: format string is defined here
pr_debug("%s: %*ph\n", "Resend", smi_msg->data, smi_msg->data_size);
~~^
%*dvim +5 include/linux/kern_levels.h
314ba3520e513a Joe Perches 2012-07-30 404d2c8c83d0e3a Joe Perches 2012-07-30 @5 #define KERN_SOH "\001" /* ASCII Start Of Header */04d2c8c83d0e3a Joe Perches 2012-07-30 6 #define KERN_SOH_ASCII '\001'04d2c8c83d0e3a Joe Perches 2012-07-30 7
:::::: The code at line 5 was first introduced by commit
:::::: 04d2c8c83d0e3ac5f78aeede51babb3236200112 printk: convert the format for KERN_<LEVEL> to a 2 byte pattern
:::::: TO: Joe Perches <[email protected]>
:::::: CC: Linus Torvalds <[email protected]>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
kbuild test robot
build botRe: [PATCH] ipmi: Convert ipmi_debug_msg to pr_debug and use %*ph
In reply to Joe PerchesI love your patch! Perhaps something to improve:
Hi Joe,
I love your patch! Perhaps something to improve:
[auto build test WARNING on char-misc/char-misc-testing]
[cannot apply to v5.4-rc2 next-20191011]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
url: https://github.com/0day-ci/linux/commits/Joe-Perches/ipmi-Convert-ipmi_debug_msg-to-pr_debug-and-use-ph/20191014-051352
config: sparc64-allmodconfig (attached as .config)
compiler: sparc64-linux-gcc (GCC) 7.4.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=7.4.0 make.cross ARCH=sparc64
If you fix the issue, kindly add following tag
All warnings (new ones prefixed by >>):
drivers/char/ipmi/ipmi_msghandler.c: In function 'i_ipmi_request':
>> drivers/char/ipmi/ipmi_msghandler.c:14:21: warning: field width specifier '*' expects argument of type 'int', but argument 5 has type 'unsigned char *' [-Wformat=]
#define pr_fmt(fmt) "%s" fmt, "IPMI message handler: "
^
include/linux/dynamic_debug.h:125:15: note: in expansion of macro 'pr_fmt'
func(&id, ##__VA_ARGS__); \
^~~~~~~~~~~
include/linux/dynamic_debug.h:143:2: note: in expansion of macro '__dynamic_func_call'
__dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~
include/linux/dynamic_debug.h:153:2: note: in expansion of macro '_dynamic_func_call'
_dynamic_func_call(fmt, __dynamic_pr_debug, \
^~~~~~~~~~~~~~~~~~
include/linux/printk.h:336:2: note: in expansion of macro 'dynamic_pr_debug'
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~
>> drivers/char/ipmi/ipmi_msghandler.c:2251:3: note: in expansion of macro 'pr_debug'
pr_debug("%s: %*ph\n",
^~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:2251:18: note: format string is defined here
pr_debug("%s: %*ph\n",
~^~
>> drivers/char/ipmi/ipmi_msghandler.c:14:21: warning: format '%p' expects argument of type 'void *', but argument 6 has type 'int' [-Wformat=]
#define pr_fmt(fmt) "%s" fmt, "IPMI message handler: "
^
include/linux/dynamic_debug.h:125:15: note: in expansion of macro 'pr_fmt'
func(&id, ##__VA_ARGS__); \
^~~~~~~~~~~
include/linux/dynamic_debug.h:143:2: note: in expansion of macro '__dynamic_func_call'
__dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~
include/linux/dynamic_debug.h:153:2: note: in expansion of macro '_dynamic_func_call'
_dynamic_func_call(fmt, __dynamic_pr_debug, \
^~~~~~~~~~~~~~~~~~
include/linux/printk.h:336:2: note: in expansion of macro 'dynamic_pr_debug'
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~
>> drivers/char/ipmi/ipmi_msghandler.c:2251:3: note: in expansion of macro 'pr_debug'
pr_debug("%s: %*ph\n",
^~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:2251:19: note: format string is defined here
pr_debug("%s: %*ph\n",
~~^
%*d
drivers/char/ipmi/ipmi_msghandler.c: In function 'handle_ipmb_get_msg_cmd':
>> drivers/char/ipmi/ipmi_msghandler.c:14:21: warning: field width specifier '*' expects argument of type 'int', but argument 5 has type 'unsigned char *' [-Wformat=]
#define pr_fmt(fmt) "%s" fmt, "IPMI message handler: "
^
include/linux/dynamic_debug.h:125:15: note: in expansion of macro 'pr_fmt'
func(&id, ##__VA_ARGS__); \
^~~~~~~~~~~
include/linux/dynamic_debug.h:143:2: note: in expansion of macro '__dynamic_func_call'
__dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~
include/linux/dynamic_debug.h:153:2: note: in expansion of macro '_dynamic_func_call'
_dynamic_func_call(fmt, __dynamic_pr_debug, \
^~~~~~~~~~~~~~~~~~
include/linux/printk.h:336:2: note: in expansion of macro 'dynamic_pr_debug'
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:3715:3: note: in expansion of macro 'pr_debug'
pr_debug("%s: %*ph\n",
^~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:3715:18: note: format string is defined here
pr_debug("%s: %*ph\n",
~^~
>> drivers/char/ipmi/ipmi_msghandler.c:14:21: warning: format '%p' expects argument of type 'void *', but argument 6 has type 'int' [-Wformat=]
#define pr_fmt(fmt) "%s" fmt, "IPMI message handler: "
^
include/linux/dynamic_debug.h:125:15: note: in expansion of macro 'pr_fmt'
func(&id, ##__VA_ARGS__); \
^~~~~~~~~~~
include/linux/dynamic_debug.h:143:2: note: in expansion of macro '__dynamic_func_call'
__dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~
include/linux/dynamic_debug.h:153:2: note: in expansion of macro '_dynamic_func_call'
_dynamic_func_call(fmt, __dynamic_pr_debug, \
^~~~~~~~~~~~~~~~~~
include/linux/printk.h:336:2: note: in expansion of macro 'dynamic_pr_debug'
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:3715:3: note: in expansion of macro 'pr_debug'
pr_debug("%s: %*ph\n",
^~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:3715:19: note: format string is defined here
pr_debug("%s: %*ph\n",
~~^
%*d
drivers/char/ipmi/ipmi_msghandler.c: In function 'handle_one_recv_msg':
>> drivers/char/ipmi/ipmi_msghandler.c:14:21: warning: field width specifier '*' expects argument of type 'int', but argument 5 has type 'unsigned char *' [-Wformat=]
#define pr_fmt(fmt) "%s" fmt, "IPMI message handler: "
^
include/linux/dynamic_debug.h:125:15: note: in expansion of macro 'pr_fmt'
func(&id, ##__VA_ARGS__); \
^~~~~~~~~~~
include/linux/dynamic_debug.h:143:2: note: in expansion of macro '__dynamic_func_call'
__dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~
include/linux/dynamic_debug.h:153:2: note: in expansion of macro '_dynamic_func_call'
_dynamic_func_call(fmt, __dynamic_pr_debug, \
^~~~~~~~~~~~~~~~~~
include/linux/printk.h:336:2: note: in expansion of macro 'dynamic_pr_debug'
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:4203:2: note: in expansion of macro 'pr_debug'
pr_debug("%s: %*ph\n", "Recv", msg->rsp, msg->rsp_size);
^~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:4203:17: note: format string is defined here
pr_debug("%s: %*ph\n", "Recv", msg->rsp, msg->rsp_size);
~^~
>> drivers/char/ipmi/ipmi_msghandler.c:14:21: warning: format '%p' expects argument of type 'void *', but argument 6 has type 'int' [-Wformat=]
#define pr_fmt(fmt) "%s" fmt, "IPMI message handler: "
^
include/linux/dynamic_debug.h:125:15: note: in expansion of macro 'pr_fmt'
func(&id, ##__VA_ARGS__); \
^~~~~~~~~~~
include/linux/dynamic_debug.h:143:2: note: in expansion of macro '__dynamic_func_call'
__dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~
include/linux/dynamic_debug.h:153:2: note: in expansion of macro '_dynamic_func_call'
_dynamic_func_call(fmt, __dynamic_pr_debug, \
^~~~~~~~~~~~~~~~~~
include/linux/printk.h:336:2: note: in expansion of macro 'dynamic_pr_debug'
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:4203:2: note: in expansion of macro 'pr_debug'
pr_debug("%s: %*ph\n", "Recv", msg->rsp, msg->rsp_size);
^~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:4203:18: note: format string is defined here
pr_debug("%s: %*ph\n", "Recv", msg->rsp, msg->rsp_size);
~~^
%*d
drivers/char/ipmi/ipmi_msghandler.c: In function 'smi_from_recv_msg':
>> drivers/char/ipmi/ipmi_msghandler.c:14:21: warning: field width specifier '*' expects argument of type 'int', but argument 5 has type 'unsigned char *' [-Wformat=]
#define pr_fmt(fmt) "%s" fmt, "IPMI message handler: "
^
include/linux/dynamic_debug.h:125:15: note: in expansion of macro 'pr_fmt'
func(&id, ##__VA_ARGS__); \
^~~~~~~~~~~
include/linux/dynamic_debug.h:143:2: note: in expansion of macro '__dynamic_func_call'
__dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~
include/linux/dynamic_debug.h:153:2: note: in expansion of macro '_dynamic_func_call'
_dynamic_func_call(fmt, __dynamic_pr_debug, \
^~~~~~~~~~~~~~~~~~
include/linux/printk.h:336:2: note: in expansion of macro 'dynamic_pr_debug'
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:4562:2: note: in expansion of macro 'pr_debug'
pr_debug("%s: %*ph\n", "Resend", smi_msg->data, smi_msg->data_size);
^~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:4562:17: note: format string is defined here
pr_debug("%s: %*ph\n", "Resend", smi_msg->data, smi_msg->data_size);
~^~
>> drivers/char/ipmi/ipmi_msghandler.c:14:21: warning: format '%p' expects argument of type 'void *', but argument 6 has type 'int' [-Wformat=]
#define pr_fmt(fmt) "%s" fmt, "IPMI message handler: "
^
include/linux/dynamic_debug.h:125:15: note: in expansion of macro 'pr_fmt'
func(&id, ##__VA_ARGS__); \
^~~~~~~~~~~
include/linux/dynamic_debug.h:143:2: note: in expansion of macro '__dynamic_func_call'
__dynamic_func_call(__UNIQUE_ID(ddebug), fmt, func, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~~~~
include/linux/dynamic_debug.h:153:2: note: in expansion of macro '_dynamic_func_call'
_dynamic_func_call(fmt, __dynamic_pr_debug, \
^~~~~~~~~~~~~~~~~~
include/linux/printk.h:336:2: note: in expansion of macro 'dynamic_pr_debug'
dynamic_pr_debug(fmt, ##__VA_ARGS__)
^~~~~~~~~~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:4562:2: note: in expansion of macro 'pr_debug'
pr_debug("%s: %*ph\n", "Resend", smi_msg->data, smi_msg->data_size);
^~~~~~~~
drivers/char/ipmi/ipmi_msghandler.c:4562:18: note: format string is defined here
pr_debug("%s: %*ph\n", "Resend", smi_msg->data, smi_msg->data_size);
~~^
%*dvim +14 drivers/char/ipmi/ipmi_msghandler.c
445e2cbda928a3 Joe Perches 2018-05-09 @14 #define pr_fmt(fmt) "%s" fmt, "IPMI message handler: " 445e2cbda928a3 Joe Perches 2018-05-09 15 #define dev_fmt pr_fmt445e2cbda928a3 Joe Perches 2018-05-09 16
:::::: The code at line 14 was first introduced by commit
:::::: 445e2cbda928a3523c1c1da76788d19df52611c8 ipmi: msghandler: Add and use pr_fmt and dev_fmt, remove PFX
:::::: TO: Joe Perches <[email protected]>
:::::: CC: Corey Minyard <[email protected]>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation