hwmon: (tmp421) Allow reading at 2Hz instead of 0.5Hz
PATCH 1/1 hwmon: (tmp421) Allow reading at 2Hz instead of 0.5Hz
Our driver configures the device to read at 2Hz, but then only allows the user to read cached temp values at up to 0.5Hz. Let's allow users to read as quickly as we do.
Signed-off-by Kyle Roeschley <[email protected]>
--- drivers/hwmon/tmp421.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/hwmon/tmp421.c +2 -1
@@ -127,7 +127,8 @@ static struct tmp421_data *tmp421_update_device(struct device *dev)mutex_lock (&data->update_lock); -if (time_after (jiffies, data->last_updated +2 *HZ ) || !data->valid) { +if (time_after (jiffies, data->last_updated + (HZ /2 )) || + !data->valid) { data->config =i2c_smbus_read_byte_data (client,TMP421_CONFIG_REG_1 );
Signature · 1 line
2.23.0.rc1
Quoted 5 lines · Kyle Roeschley
Our driver configures the device to read at 2Hz, but then only allows the user to read cached temp values at up to 0.5Hz. Let's allow users to read as quickly as we do.
Signed-off-by Kyle Roeschley <[email protected]>
Applied.
Thanks,
Guenter
Quoted 18 lines
--- drivers/hwmon/tmp421.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/hwmon/tmp421.c +2
-1@@ -127,7 +127,8 @@ static struct tmp421_data *tmp421_update_device(struct device *dev)mutex_lock (&data->update_lock); -if (time_after (jiffies, data->last_updated +2 *HZ ) || !data->valid) { +if (time_after (jiffies, data->last_updated + (HZ /2 )) || + !data->valid) { data->config =i2c_smbus_read_byte_data (client,TMP421_CONFIG_REG_1 );