Skip to contentSkip to conversation

crypto: powerpc - convert SPE AES algorithms to skcipher API

PATCH In review Eric Biggers 3 participants 6 messages Oct 15, 2019 – Oct 25, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover crypto: powerpc - convert SPE AES algorithms to skcipher API

This series converts the glue code for the PowerPC SPE implementations of AES-ECB, AES-CBC, AES-CTR, and AES-XTS from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed.

Patch 1-2 are fixes. Patch 3 is the actual conversion.

Tested with:

export ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- make mpc85xx_defconfig
cat >> .config << EOF
# CONFIG_MODULES is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_DEBUG_KERNEL=y CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_XTS=y CONFIG_CRYPTO_AES_PPC_SPE=y
EOF
make olddefconfig
make -j32
qemu-system-ppc -M mpc8544ds -cpu e500 -nographic \
-kernel arch/powerpc/boot/zImage \
-append cryptomgr.fuzz_iterations=1000

Note that xts-ppc-spe still fails the comparison tests due to the lack of ciphertext stealing support. This is not addressed by this series.

Changed since v1:

- Split fixes into separate patches.

- Made ppc_aes_setkey_skcipher() call ppc_aes_setkey(), rather than creating a separate expand_key() function. This keeps the code shorter.

Eric Biggers (3):
crypto: powerpc - don't unnecessarily use atomic scatterwalk
crypto: powerpc - don't set ivsize for AES-ECB
crypto: powerpc - convert SPE AES algorithms to skcipher API

 arch/powerpc/crypto/aes-spe-glue.c | 389 ++++++++++++-----------------
 crypto/Kconfig                     |   1 +
 2 files changed, 166 insertions(+), 224 deletions(-)
Signature · 1 line
2.23.0
#1 lore raw

PATCH v2 1/3 crypto: powerpc - don't unnecessarily use atomic scatterwalk

From: Eric Biggers <[email protected]>

The PowerPC SPE implementations of AES modes only disable preemption during the actual encryption/decryption, not during the scatterwalk functions. It's therefore unnecessary to request an atomic scatterwalk. So don't do so.

---
 arch/powerpc/crypto/aes-spe-glue.c | 7 -------
 1 file changed, 7 deletions(-)
arch/powerpc/crypto/aes-spe-glue.c +0 -7
index 3a4ca7d32477..319f1dbb3a70 100644
@@ -186,7 +186,6 @@ static int ppc_ecb_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 	unsigned int ubytes;
 	int err;
 
-	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 
@@ -214,7 +213,6 @@ static int ppc_ecb_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 	unsigned int ubytes;
 	int err;
 
-	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 
@@ -242,7 +240,6 @@ static int ppc_cbc_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 	unsigned int ubytes;
 	int err;
 
-	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 
@@ -270,7 +267,6 @@ static int ppc_cbc_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 	unsigned int ubytes;
 	int err;
 
-	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 
@@ -298,7 +294,6 @@ static int ppc_ctr_crypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 	unsigned int pbytes, ubytes;
 	int err;
 
-	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE);
 
@@ -329,7 +324,6 @@ static int ppc_xts_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 	int err;
 	u32 *twk;
 
-	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 	twk = ctx->key_twk;
@@ -360,7 +354,6 @@ static int ppc_xts_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
 	int err;
 	u32 *twk;
 
-	desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;
 	blkcipher_walk_init(&walk, dst, src, nbytes);
 	err = blkcipher_walk_virt(desc, &walk);
 	twk = ctx->key_twk;
Signature · 1 line
2.23.0
#2 lore raw

PATCH v2 2/3 crypto: powerpc - don't set ivsize for AES-ECB

In reply to Eric Biggers

From: Eric Biggers <[email protected]>

Set the ivsize for the "ecb-ppc-spe" algorithm to 0, since ECB mode doesn't take an IV.

This fixes a failure in the extra crypto self-tests:

alg: skcipher: ivsize for ecb-ppc-spe (16) doesn't match generic impl (0)

---
 arch/powerpc/crypto/aes-spe-glue.c | 1 -
 1 file changed, 1 deletion(-)
arch/powerpc/crypto/aes-spe-glue.c +0 -1
index 319f1dbb3a70..4189d2644f74 100644
@@ -415,7 +415,6 @@ static struct crypto_alg aes_algs[] = { {
 		.blkcipher = {
 			.min_keysize		=	AES_MIN_KEY_SIZE,
 			.max_keysize		=	AES_MAX_KEY_SIZE,
-			.ivsize			=	AES_BLOCK_SIZE,
 			.setkey			=	ppc_aes_setkey,
 			.encrypt		=	ppc_ecb_encrypt,
 			.decrypt		=	ppc_ecb_decrypt,
Signature · 1 line
2.23.0
#3 lore raw

PATCH v2 3/3 crypto: powerpc - convert SPE AES algorithms to skcipher API

In reply to Eric Biggers

From: Eric Biggers <[email protected]>

Convert the glue code for the PowerPC SPE implementations of AES-ECB, AES-CBC, AES-CTR, and AES-XTS from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed.

Tested with:

export ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- make mpc85xx_defconfig
cat >> .config << EOF
# CONFIG_MODULES is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_DEBUG_KERNEL=y CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_XTS=y CONFIG_CRYPTO_AES_PPC_SPE=y
EOF
make olddefconfig
make -j32
qemu-system-ppc -M mpc8544ds -cpu e500 -nographic \
-kernel arch/powerpc/boot/zImage \
-append cryptomgr.fuzz_iterations=1000

Note that xts-ppc-spe still fails the comparison tests due to the lack of ciphertext stealing support. This is not addressed by this patch.

This patch also cleans up the code by making ->encrypt() and ->decrypt() call a common function for each of ECB, CBC, and XTS, and by using a clearer way to compute the length to process at each step.

---
 arch/powerpc/crypto/aes-spe-glue.c | 381 +++++++++++++----------------
 crypto/Kconfig                     |   1 +
 2 files changed, 166 insertions(+), 216 deletions(-)
arch/powerpc/crypto/aes-spe-glue.c +165 -216
index 4189d2644f74..f828f8bcd0c6 100644
@@ -17,6 +17,7 @@
 #include <asm/byteorder.h>
 #include <asm/switch_to.h>
 #include <crypto/algapi.h>
+#include <crypto/internal/skcipher.h>
 #include <crypto/xts.h>
 
 /*
@@ -118,13 +119,19 @@ static int ppc_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key,
 	return 0;
 }
 
-static int ppc_xts_setkey(struct crypto_tfm *tfm, const u8 *in_key,
+static int ppc_aes_setkey_skcipher(struct crypto_skcipher *tfm,
+				   const u8 *in_key, unsigned int key_len)
+{
+	return ppc_aes_setkey(crypto_skcipher_tfm(tfm), in_key, key_len);
+}
+
+static int ppc_xts_setkey(struct crypto_skcipher *tfm, const u8 *in_key,
 		   unsigned int key_len)
 {
-	struct ppc_xts_ctx *ctx = crypto_tfm_ctx(tfm);
+	struct ppc_xts_ctx *ctx = crypto_skcipher_ctx(tfm);
 	int err;
 
-	err = xts_check_key(tfm, in_key, key_len);
+	err = xts_verify_key(tfm, in_key, key_len);
 	if (err)
 		return err;
 
@@ -133,7 +140,7 @@ static int ppc_xts_setkey(struct crypto_tfm *tfm, const u8 *in_key,
 	if (key_len != AES_KEYSIZE_128 &&
 	    key_len != AES_KEYSIZE_192 &&
 	    key_len != AES_KEYSIZE_256) {
-		tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+		crypto_skcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN);
 		return -EINVAL;
 	}
 
@@ -178,201 +185,154 @@ static void ppc_aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
 	spe_end();
 }
 
-static int ppc_ecb_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
-			   struct scatterlist *src, unsigned int nbytes)
+static int ppc_ecb_crypt(struct skcipher_request *req, bool enc)
 {
-	struct ppc_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
-	struct blkcipher_walk walk;
-	unsigned int ubytes;
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct ppc_aes_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	unsigned int nbytes;
 	int err;
 
-	blkcipher_walk_init(&walk, dst, src, nbytes);
-	err = blkcipher_walk_virt(desc, &walk);
+	err = skcipher_walk_virt(&walk, req, false);
 
-	while ((nbytes = walk.nbytes)) {
-		ubytes = nbytes > MAX_BYTES ?
-			 nbytes - MAX_BYTES : nbytes & (AES_BLOCK_SIZE - 1);
-		nbytes -= ubytes;
+	while ((nbytes = walk.nbytes) != 0) {
+		nbytes = min_t(unsigned int, nbytes, MAX_BYTES);
+		nbytes = round_down(nbytes, AES_BLOCK_SIZE);
 
 		spe_begin();
-		ppc_encrypt_ecb(walk.dst.virt.addr, walk.src.virt.addr,
-				ctx->key_enc, ctx->rounds, nbytes);
+		if (enc)
+			ppc_encrypt_ecb(walk.dst.virt.addr, walk.src.virt.addr,
+					ctx->key_enc, ctx->rounds, nbytes);
+		else
+			ppc_decrypt_ecb(walk.dst.virt.addr, walk.src.virt.addr,
+					ctx->key_dec, ctx->rounds, nbytes);
 		spe_end();
 
-		err = blkcipher_walk_done(desc, &walk, ubytes);
+		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
 	}
 
 	return err;
 }
 
-static int ppc_ecb_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
-			   struct scatterlist *src, unsigned int nbytes)
+static int ppc_ecb_encrypt(struct skcipher_request *req)
 {
-	struct ppc_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
-	struct blkcipher_walk walk;
-	unsigned int ubytes;
-	int err;
-
-	blkcipher_walk_init(&walk, dst, src, nbytes);
-	err = blkcipher_walk_virt(desc, &walk);
-
-	while ((nbytes = walk.nbytes)) {
-		ubytes = nbytes > MAX_BYTES ?
-			 nbytes - MAX_BYTES : nbytes & (AES_BLOCK_SIZE - 1);
-		nbytes -= ubytes;
-
-		spe_begin();
-		ppc_decrypt_ecb(walk.dst.virt.addr, walk.src.virt.addr,
-				ctx->key_dec, ctx->rounds, nbytes);
-		spe_end();
-
-		err = blkcipher_walk_done(desc, &walk, ubytes);
-	}
+	return ppc_ecb_crypt(req, true);
+}
 
-	return err;
+static int ppc_ecb_decrypt(struct skcipher_request *req)
+{
+	return ppc_ecb_crypt(req, false);
 }
 
-static int ppc_cbc_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
-			   struct scatterlist *src, unsigned int nbytes)
+static int ppc_cbc_crypt(struct skcipher_request *req, bool enc)
 {
-	struct ppc_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
-	struct blkcipher_walk walk;
-	unsigned int ubytes;
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct ppc_aes_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	unsigned int nbytes;
 	int err;
 
-	blkcipher_walk_init(&walk, dst, src, nbytes);
-	err = blkcipher_walk_virt(desc, &walk);
+	err = skcipher_walk_virt(&walk, req, false);
 
-	while ((nbytes = walk.nbytes)) {
-		ubytes = nbytes > MAX_BYTES ?
-			 nbytes - MAX_BYTES : nbytes & (AES_BLOCK_SIZE - 1);
-		nbytes -= ubytes;
+	while ((nbytes = walk.nbytes) != 0) {
+		nbytes = min_t(unsigned int, nbytes, MAX_BYTES);
+		nbytes = round_down(nbytes, AES_BLOCK_SIZE);
 
 		spe_begin();
-		ppc_encrypt_cbc(walk.dst.virt.addr, walk.src.virt.addr,
-				ctx->key_enc, ctx->rounds, nbytes, walk.iv);
+		if (enc)
+			ppc_encrypt_cbc(walk.dst.virt.addr, walk.src.virt.addr,
+					ctx->key_enc, ctx->rounds, nbytes,
+					walk.iv);
+		else
+			ppc_decrypt_cbc(walk.dst.virt.addr, walk.src.virt.addr,
+					ctx->key_dec, ctx->rounds, nbytes,
+					walk.iv);
 		spe_end();
 
-		err = blkcipher_walk_done(desc, &walk, ubytes);
+		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
 	}
 
 	return err;
 }
 
-static int ppc_cbc_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
-			   struct scatterlist *src, unsigned int nbytes)
+static int ppc_cbc_encrypt(struct skcipher_request *req)
 {
-	struct ppc_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
-	struct blkcipher_walk walk;
-	unsigned int ubytes;
-	int err;
-
-	blkcipher_walk_init(&walk, dst, src, nbytes);
-	err = blkcipher_walk_virt(desc, &walk);
-
-	while ((nbytes = walk.nbytes)) {
-		ubytes = nbytes > MAX_BYTES ?
-			 nbytes - MAX_BYTES : nbytes & (AES_BLOCK_SIZE - 1);
-		nbytes -= ubytes;
-
-		spe_begin();
-		ppc_decrypt_cbc(walk.dst.virt.addr, walk.src.virt.addr,
-				ctx->key_dec, ctx->rounds, nbytes, walk.iv);
-		spe_end();
-
-		err = blkcipher_walk_done(desc, &walk, ubytes);
-	}
+	return ppc_cbc_crypt(req, true);
+}
 
-	return err;
+static int ppc_cbc_decrypt(struct skcipher_request *req)
+{
+	return ppc_cbc_crypt(req, false);
 }
 
-static int ppc_ctr_crypt(struct blkcipher_desc *desc, struct scatterlist *dst,
-			 struct scatterlist *src, unsigned int nbytes)
+static int ppc_ctr_crypt(struct skcipher_request *req)
 {
-	struct ppc_aes_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
-	struct blkcipher_walk walk;
-	unsigned int pbytes, ubytes;
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct ppc_aes_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	unsigned int nbytes;
 	int err;
 
-	blkcipher_walk_init(&walk, dst, src, nbytes);
-	err = blkcipher_walk_virt_block(desc, &walk, AES_BLOCK_SIZE);
+	err = skcipher_walk_virt(&walk, req, false);
 
-	while ((pbytes = walk.nbytes)) {
-		pbytes = pbytes > MAX_BYTES ? MAX_BYTES : pbytes;
-		pbytes = pbytes == nbytes ?
-			 nbytes : pbytes & ~(AES_BLOCK_SIZE - 1);
-		ubytes = walk.nbytes - pbytes;
+	while ((nbytes = walk.nbytes) != 0) {
+		nbytes = min_t(unsigned int, nbytes, MAX_BYTES);
+		if (nbytes < walk.total)
+			nbytes = round_down(nbytes, AES_BLOCK_SIZE);
 
 		spe_begin();
 		ppc_crypt_ctr(walk.dst.virt.addr, walk.src.virt.addr,
-			      ctx->key_enc, ctx->rounds, pbytes , walk.iv);
+			      ctx->key_enc, ctx->rounds, nbytes, walk.iv);
 		spe_end();
 
-		nbytes -= pbytes;
-		err = blkcipher_walk_done(desc, &walk, ubytes);
+		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
 	}
 
 	return err;
 }
 
-static int ppc_xts_encrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
-			   struct scatterlist *src, unsigned int nbytes)
+static int ppc_xts_crypt(struct skcipher_request *req, bool enc)
 {
-	struct ppc_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
-	struct blkcipher_walk walk;
-	unsigned int ubytes;
+	struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
+	struct ppc_xts_ctx *ctx = crypto_skcipher_ctx(tfm);
+	struct skcipher_walk walk;
+	unsigned int nbytes;
 	int err;
 	u32 *twk;
 
-	blkcipher_walk_init(&walk, dst, src, nbytes);
-	err = blkcipher_walk_virt(desc, &walk);
+	err = skcipher_walk_virt(&walk, req, false);
 	twk = ctx->key_twk;
 
-	while ((nbytes = walk.nbytes)) {
-		ubytes = nbytes > MAX_BYTES ?
-			 nbytes - MAX_BYTES : nbytes & (AES_BLOCK_SIZE - 1);
-		nbytes -= ubytes;
+	while ((nbytes = walk.nbytes) != 0) {
+		nbytes = min_t(unsigned int, nbytes, MAX_BYTES);
+		nbytes = round_down(nbytes, AES_BLOCK_SIZE);
 
 		spe_begin();
-		ppc_encrypt_xts(walk.dst.virt.addr, walk.src.virt.addr,
-				ctx->key_enc, ctx->rounds, nbytes, walk.iv, twk);
+		if (enc)
+			ppc_encrypt_xts(walk.dst.virt.addr, walk.src.virt.addr,
+					ctx->key_enc, ctx->rounds, nbytes,
+					walk.iv, twk);
+		else
+			ppc_decrypt_xts(walk.dst.virt.addr, walk.src.virt.addr,
+					ctx->key_dec, ctx->rounds, nbytes,
+					walk.iv, twk);
 		spe_end();
 
 		twk = NULL;
-		err = blkcipher_walk_done(desc, &walk, ubytes);
+		err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
 	}
 
 	return err;
 }
 
-static int ppc_xts_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
-			   struct scatterlist *src, unsigned int nbytes)
+static int ppc_xts_encrypt(struct skcipher_request *req)
 {
-	struct ppc_xts_ctx *ctx = crypto_blkcipher_ctx(desc->tfm);
-	struct blkcipher_walk walk;
-	unsigned int ubytes;
-	int err;
-	u32 *twk;
-
-	blkcipher_walk_init(&walk, dst, src, nbytes);
-	err = blkcipher_walk_virt(desc, &walk);
-	twk = ctx->key_twk;
-
-	while ((nbytes = walk.nbytes)) {
-		ubytes = nbytes > MAX_BYTES ?
-			 nbytes - MAX_BYTES : nbytes & (AES_BLOCK_SIZE - 1);
-		nbytes -= ubytes;
-
-		spe_begin();
-		ppc_decrypt_xts(walk.dst.virt.addr, walk.src.virt.addr,
-				ctx->key_dec, ctx->rounds, nbytes, walk.iv, twk);
-		spe_end();
-
-		twk = NULL;
-		err = blkcipher_walk_done(desc, &walk, ubytes);
-	}
+	return ppc_xts_crypt(req, true);
+}
 
-	return err;
+static int ppc_xts_decrypt(struct skcipher_request *req)
+{
+	return ppc_xts_crypt(req, false);
 }
 
 /*
@@ -381,9 +341,9 @@ static int ppc_xts_decrypt(struct blkcipher_desc *desc, struct scatterlist *dst,
  * This improves IPsec thoughput by another few percent. Additionally we assume
  * that AES context is always aligned to at least 8 bytes because it is created
  * with kmalloc() in the crypto infrastructure
- *
  */
-static struct crypto_alg aes_algs[] = { {
+
+static struct crypto_alg aes_cipher_alg = {
 	.cra_name		=	"aes",
 	.cra_driver_name	=	"aes-ppc-spe",
 	.cra_priority		=	300,
@@ -401,95 +361,84 @@ static struct crypto_alg aes_algs[] = { {
 			.cia_decrypt		=	ppc_aes_decrypt
 		}
 	}
-}, {
-	.cra_name		=	"ecb(aes)",
-	.cra_driver_name	=	"ecb-ppc-spe",
-	.cra_priority		=	300,
-	.cra_flags		=	CRYPTO_ALG_TYPE_BLKCIPHER,
-	.cra_blocksize		=	AES_BLOCK_SIZE,
-	.cra_ctxsize		=	sizeof(struct ppc_aes_ctx),
-	.cra_alignmask		=	0,
-	.cra_type		=	&crypto_blkcipher_type,
-	.cra_module		=	THIS_MODULE,
-	.cra_u = {
-		.blkcipher = {
-			.min_keysize		=	AES_MIN_KEY_SIZE,
-			.max_keysize		=	AES_MAX_KEY_SIZE,
-			.setkey			=	ppc_aes_setkey,
-			.encrypt		=	ppc_ecb_encrypt,
-			.decrypt		=	ppc_ecb_decrypt,
-		}
-	}
-}, {
-	.cra_name		=	"cbc(aes)",
-	.cra_driver_name	=	"cbc-ppc-spe",
-	.cra_priority		=	300,
-	.cra_flags		=	CRYPTO_ALG_TYPE_BLKCIPHER,
-	.cra_blocksize		=	AES_BLOCK_SIZE,
-	.cra_ctxsize		=	sizeof(struct ppc_aes_ctx),
-	.cra_alignmask		=	0,
-	.cra_type		=	&crypto_blkcipher_type,
-	.cra_module		=	THIS_MODULE,
-	.cra_u = {
-		.blkcipher = {
-			.min_keysize		=	AES_MIN_KEY_SIZE,
-			.max_keysize		=	AES_MAX_KEY_SIZE,
-			.ivsize			=	AES_BLOCK_SIZE,
-			.setkey			=	ppc_aes_setkey,
-			.encrypt		=	ppc_cbc_encrypt,
-			.decrypt		=	ppc_cbc_decrypt,
-		}
-	}
-}, {
-	.cra_name		=	"ctr(aes)",
-	.cra_driver_name	=	"ctr-ppc-spe",
-	.cra_priority		=	300,
-	.cra_flags		=	CRYPTO_ALG_TYPE_BLKCIPHER,
-	.cra_blocksize		=	1,
-	.cra_ctxsize		=	sizeof(struct ppc_aes_ctx),
-	.cra_alignmask		=	0,
-	.cra_type		=	&crypto_blkcipher_type,
-	.cra_module		=	THIS_MODULE,
-	.cra_u = {
-		.blkcipher = {
-			.min_keysize		=	AES_MIN_KEY_SIZE,
-			.max_keysize		=	AES_MAX_KEY_SIZE,
-			.ivsize			=	AES_BLOCK_SIZE,
-			.setkey			=	ppc_aes_setkey,
-			.encrypt		=	ppc_ctr_crypt,
-			.decrypt		=	ppc_ctr_crypt,
-		}
-	}
-}, {
-	.cra_name		=	"xts(aes)",
-	.cra_driver_name	=	"xts-ppc-spe",
-	.cra_priority		=	300,
-	.cra_flags		=	CRYPTO_ALG_TYPE_BLKCIPHER,
-	.cra_blocksize		=	AES_BLOCK_SIZE,
-	.cra_ctxsize		=	sizeof(struct ppc_xts_ctx),
-	.cra_alignmask		=	0,
-	.cra_type		=	&crypto_blkcipher_type,
-	.cra_module		=	THIS_MODULE,
-	.cra_u = {
-		.blkcipher = {
-			.min_keysize		=	AES_MIN_KEY_SIZE * 2,
-			.max_keysize		=	AES_MAX_KEY_SIZE * 2,
-			.ivsize			=	AES_BLOCK_SIZE,
-			.setkey			=	ppc_xts_setkey,
-			.encrypt		=	ppc_xts_encrypt,
-			.decrypt		=	ppc_xts_decrypt,
-		}
+};
+
+static struct skcipher_alg aes_skcipher_algs[] = {
+	{
+		.base.cra_name		=	"ecb(aes)",
+		.base.cra_driver_name	=	"ecb-ppc-spe",
+		.base.cra_priority	=	300,
+		.base.cra_blocksize	=	AES_BLOCK_SIZE,
+		.base.cra_ctxsize	=	sizeof(struct ppc_aes_ctx),
+		.base.cra_module	=	THIS_MODULE,
+		.min_keysize		=	AES_MIN_KEY_SIZE,
+		.max_keysize		=	AES_MAX_KEY_SIZE,
+		.setkey			=	ppc_aes_setkey_skcipher,
+		.encrypt		=	ppc_ecb_encrypt,
+		.decrypt		=	ppc_ecb_decrypt,
+	}, {
+		.base.cra_name		=	"cbc(aes)",
+		.base.cra_driver_name	=	"cbc-ppc-spe",
+		.base.cra_priority	=	300,
+		.base.cra_blocksize	=	AES_BLOCK_SIZE,
+		.base.cra_ctxsize	=	sizeof(struct ppc_aes_ctx),
+		.base.cra_module	=	THIS_MODULE,
+		.min_keysize		=	AES_MIN_KEY_SIZE,
+		.max_keysize		=	AES_MAX_KEY_SIZE,
+		.ivsize			=	AES_BLOCK_SIZE,
+		.setkey			=	ppc_aes_setkey_skcipher,
+		.encrypt		=	ppc_cbc_encrypt,
+		.decrypt		=	ppc_cbc_decrypt,
+	}, {
+		.base.cra_name		=	"ctr(aes)",
+		.base.cra_driver_name	=	"ctr-ppc-spe",
+		.base.cra_priority	=	300,
+		.base.cra_blocksize	=	1,
+		.base.cra_ctxsize	=	sizeof(struct ppc_aes_ctx),
+		.base.cra_module	=	THIS_MODULE,
+		.min_keysize		=	AES_MIN_KEY_SIZE,
+		.max_keysize		=	AES_MAX_KEY_SIZE,
+		.ivsize			=	AES_BLOCK_SIZE,
+		.setkey			=	ppc_aes_setkey_skcipher,
+		.encrypt		=	ppc_ctr_crypt,
+		.decrypt		=	ppc_ctr_crypt,
+		.chunksize		=	AES_BLOCK_SIZE,
+	}, {
+		.base.cra_name		=	"xts(aes)",
+		.base.cra_driver_name	=	"xts-ppc-spe",
+		.base.cra_priority	=	300,
+		.base.cra_blocksize	=	AES_BLOCK_SIZE,
+		.base.cra_ctxsize	=	sizeof(struct ppc_xts_ctx),
+		.base.cra_module	=	THIS_MODULE,
+		.min_keysize		=	AES_MIN_KEY_SIZE * 2,
+		.max_keysize		=	AES_MAX_KEY_SIZE * 2,
+		.ivsize			=	AES_BLOCK_SIZE,
+		.setkey			=	ppc_xts_setkey,
+		.encrypt		=	ppc_xts_encrypt,
+		.decrypt		=	ppc_xts_decrypt,
 	}
-} };
+};
 
 static int __init ppc_aes_mod_init(void)
 {
-	return crypto_register_algs(aes_algs, ARRAY_SIZE(aes_algs));
+	int err;
+
+	err = crypto_register_alg(&aes_cipher_alg);
+	if (err)
+		return err;
+
+	err = crypto_register_skciphers(aes_skcipher_algs,
+					ARRAY_SIZE(aes_skcipher_algs));
+	if (err)
+		crypto_unregister_alg(&aes_cipher_alg);
+	return err;
 }
 
 static void __exit ppc_aes_mod_fini(void)
 {
-	crypto_unregister_algs(aes_algs, ARRAY_SIZE(aes_algs));
+	crypto_unregister_alg(&aes_cipher_alg);
+	crypto_unregister_skciphers(aes_skcipher_algs,
+				    ARRAY_SIZE(aes_skcipher_algs));
 }
 
 module_init(ppc_aes_mod_init);
crypto/Kconfig +1 -0
index 8c38c2b7f8e7..320548b4dfa9 100644
@@ -1125,6 +1125,7 @@ config CRYPTO_AES_SPARC64
 config CRYPTO_AES_PPC_SPE
 	tristate "AES cipher algorithms (PPC SPE)"
 	depends on PPC && SPE
+	select CRYPTO_BLKCIPHER
 	help
 	  AES cipher algorithms (FIPS-197). Additionally the acceleration
 	  for popular block cipher modes ECB, CBC, CTR and XTS is supported.
Signature · 1 line
2.23.0
Reviewed-by Tested-by on the v2 series
#4 lore raw
In reply to Eric Biggers
Quoted 37 lines · Eric Biggers

This series converts the glue code for the PowerPC SPE implementations of AES-ECB, AES-CBC, AES-CTR, and AES-XTS from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed.

Patch 1-2 are fixes. Patch 3 is the actual conversion.

Tested with:

export ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- make mpc85xx_defconfig
cat >> .config << EOF
# CONFIG_MODULES is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_DEBUG_KERNEL=y CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_XTS=y CONFIG_CRYPTO_AES_PPC_SPE=y
EOF
make olddefconfig
make -j32
qemu-system-ppc -M mpc8544ds -cpu e500 -nographic \
-kernel arch/powerpc/boot/zImage \
-append cryptomgr.fuzz_iterations=1000

Note that xts-ppc-spe still fails the comparison tests due to the lack of ciphertext stealing support. This is not addressed by this series.

Changed since v1:

- Split fixes into separate patches.

Quoted 9 lines

- Made ppc_aes_setkey_skcipher() call ppc_aes_setkey(), rather than creating a separate expand_key() function. This keeps the code shorter.

Eric Biggers (3):
crypto: powerpc - don't unnecessarily use atomic scatterwalk
crypto: powerpc - don't set ivsize for AES-ECB
crypto: powerpc - convert SPE AES algorithms to skcipher API

For the series

Quoted 7 lines
 arch/powerpc/crypto/aes-spe-glue.c | 389 ++++++++++++-----------------
 crypto/Kconfig                     |   1 +
 2 files changed, 166 insertions(+), 224 deletions(-)

--
2.23.0

maintainer
#5 lore raw
In reply to Eric Biggers
Quoted 40 lines · Eric Biggers

This series converts the glue code for the PowerPC SPE implementations of AES-ECB, AES-CBC, AES-CTR, and AES-XTS from the deprecated "blkcipher" API to the "skcipher" API. This is needed in order for the blkcipher API to be removed.

Patch 1-2 are fixes. Patch 3 is the actual conversion.

Tested with:

export ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- make mpc85xx_defconfig
cat >> .config << EOF
# CONFIG_MODULES is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_DEBUG_KERNEL=y CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_XTS=y CONFIG_CRYPTO_AES_PPC_SPE=y
EOF
make olddefconfig
make -j32
qemu-system-ppc -M mpc8544ds -cpu e500 -nographic \
-kernel arch/powerpc/boot/zImage \
-append cryptomgr.fuzz_iterations=1000

Note that xts-ppc-spe still fails the comparison tests due to the lack of ciphertext stealing support. This is not addressed by this series.

Changed since v1:

- Split fixes into separate patches.

- Made ppc_aes_setkey_skcipher() call ppc_aes_setkey(), rather than creating a separate expand_key() function. This keeps the code shorter.

Quoted 8 lines

Eric Biggers (3):
crypto: powerpc - don't unnecessarily use atomic scatterwalk
crypto: powerpc - don't set ivsize for AES-ECB
crypto: powerpc - convert SPE AES algorithms to skcipher API

 arch/powerpc/crypto/aes-spe-glue.c | 389 ++++++++++++-----------------
 crypto/Kconfig                     |   1 +
 2 files changed, 166 insertions(+), 224 deletions(-)

All applied. Thanks.

Signature · 3 lines
Email: Herbert Xu <[email protected]>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt