Pull request: u-boot-dfu (15.10.2019)
Dear Marek,
The following changes since commit7a779ed1755c2d5011bd9598da90291f759ae760:
travis: Exclude MIPS from the bcm job (2019-10-13 11:21:56 -0400)
are available in the Git repository at:
git at gitlab.denx.de:u-boot/custodians/u-boot-dfu.git
for you to fetch changes up to 5d897631065bb2f36bbc1bd7fabb670ce5da3ce8:
dfu: add callback for flush and initiated operation (2019-10-14 12:26:19 +0200)
----------------------------------------------------------------
Marek Szyprowski (5):
gadget: f_thor: properly enable 3rd endpoint defined by the
protocol
cmd: thor: select DFU subsystem also for 'thor' download tool
dfu: mmc: add support for in-partition offset
dwc3: flush cache only if there is a buffer attached to a request
thor: fix error path after g_dnl_register() failure
Patrick Delaunay (10):
dfu: cosmetic: cleanup sf to avoid checkpatch error
doc: dfu: Add dfu documentation
dfu: sf: add partition support for nor backend
dfu: prepare the support of multiple interface
dfu: allow to manage DFU on several devices
dfu: allow read with no data without error for EOF indication
dfu: add backend for MTD device
dfu: add partition support for MTD backend
dfu: add DFU virtual backend
dfu: add callback for flush and initiated operation
Ralph Siemsen (1):
dfu: dfu_nand: reduce verbosity
cmd/Kconfig | 1 + cmd/dfu.c | 21 +++++++++------- cmd/thordown.c | 3 ++- doc/README.dfu | 270 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/dfu/Kconfig | 21 ++++++++++++++++ drivers/dfu/Makefile | 2 ++ drivers/dfu/dfu.c | 145 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------- drivers/dfu/dfu_mmc.c | 13 ++++++++-- drivers/dfu/dfu_mtd.c | 311 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ drivers/dfu/dfu_nand.c | 2 +- drivers/dfu/dfu_sf.c | 56 +++++++++++++++++++++++++++++++++++++++++-- drivers/dfu/dfu_virt.c | 49 ++++++++++++++++++++++++++++++++++++++ drivers/usb/dwc3/gadget.c | 3 ++- drivers/usb/gadget/f_thor.c | 7 ++++++ include/dfu.h | 71
++++++++++++++++++++++++++++++++++++++++++++++++++++++ 15 files changed, 944 insertions(+), 31 deletions(-) create mode 100644 doc/README.dfu create mode 100644 drivers/dfu/dfu_mtd.c create mode 100644 drivers/dfu/dfu_virt.c
DFU_PR: Travis-CI (green):
https://travis-ci.org/lmajewski/u-boot-dfu/builds/597562672
Merge tag (for information about the changes / new features):
https://gitlab.denx.de/u-boot/custodians/u-boot-dfu/-/tags/u-boot-dfu-15Oct2019
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191015/2c20370c/attachment.sig>
Quoted 1 line · Lukasz Majewski
Dear Marek,
Hello Lukasz,
Quoted 5 lines
The following changes since commit
7a779ed1755c2d5011bd9598da90291f759ae760:travis: Exclude MIPS from the bcm job (2019-10-13 11:21:56 -0400)
Quoted 8 lines
are available in the Git repository at:
git at gitlab.denx.de:u-boot/custodians/u-boot-dfu.git
for you to fetch changes up to
5d897631065bb2f36bbc1bd7fabb670ce5da3ce8:dfu: add callback for flush and initiated operation (2019-10-14 12:26:19 +0200)
Which branch shall I pull ? This information is missing from the PR, again :-(
Hi Marek,
Quoted 14 lines · Lukasz Majewski
Quoted 1 line
Dear Marek,
Hello Lukasz,
Quoted 9 lines
The following changes since commit
7a779ed1755c2d5011bd9598da90291f759ae760:travis: Exclude MIPS from the bcm job (2019-10-13 11:21:56 -0400)
are available in the Git repository at:
git at gitlab.denx.de:u-boot/custodians/u-boot-dfu.git
Quoted 8 lines
Quoted 5 lines
for you to fetch changes up to
5d897631065bb2f36bbc1bd7fabb670ce5da3ce8:dfu: add callback for flush and initiated operation (2019-10-14 12:26:19 +0200)
Which branch shall I pull ? This information is missing from the PR, again :-(
Ach. I'm still (unfortunately) use my old script for PR.
You shall use the -master branch:
https://gitlab.denx.de/u-boot/custodians/u-boot-dfu/commits/master
I've written also the merge tag for this PR:
https://gitlab.denx.de/u-boot/custodians/u-boot-dfu/-/tags
Sorry for inconvenience and confusion.
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191015/d13eff1c/attachment.sig>
Hi Marek,
Quoted 28 lines
Hi Marek,
Quoted 15 lines · Lukasz Majewski
Quoted 1 line
Dear Marek,
Hello Lukasz,
Quoted 10 lines
The following changes since commit
7a779ed1755c2d5011bd9598da90291f759ae760:travis: Exclude MIPS from the bcm job (2019-10-13 11:21:56
-0400)are available in the Git repository at:
git at gitlab.denx.de:u-boot/custodians/u-boot-dfu.git
Quoted 8 lines
Quoted 5 lines
for you to fetch changes up to
5d897631065bb2f36bbc1bd7fabb670ce5da3ce8:dfu: add callback for flush and initiated operation (2019-10-14 12:26:19 +0200)
Which branch shall I pull ? This information is missing from the PR, again :-(
Ach. I'm still (unfortunately) use my old script for PR.
Quoted 7 lines
You shall use the -master branch:
https://gitlab.denx.de/u-boot/custodians/u-boot-dfu/commits/masterI've written also the merge tag for this PR:
https://gitlab.denx.de/u-boot/custodians/u-boot-dfu/-/tagsSorry for inconvenience and confusion.
Marek, are there any issues with this PR?
Unfortunately, I did not noticed it being applied to your u-boot-usb tree. Do you need any help?
Quoted 4 lines
Best regards,
Quoted 8 lines
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
lukma at denx.de
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191028/bbcf0f5c/attachment.sig>
Quoted 1 line · Lukasz Majewski
Hi Marek,
Hi,
Quoted 34 lines
Quoted 34 lines
Hi Marek,
Quoted 15 lines · Lukasz Majewski
Quoted 1 line
Dear Marek,
Hello Lukasz,
Quoted 10 lines
The following changes since commit
7a779ed1755c2d5011bd9598da90291f759ae760:travis: Exclude MIPS from the bcm job (2019-10-13 11:21:56
-0400)are available in the Git repository at:
git at gitlab.denx.de:u-boot/custodians/u-boot-dfu.git
Quoted 8 lines
Quoted 5 lines
for you to fetch changes up to
5d897631065bb2f36bbc1bd7fabb670ce5da3ce8:dfu: add callback for flush and initiated operation (2019-10-14 12:26:19 +0200)
Which branch shall I pull ? This information is missing from the PR, again :-(
Ach. I'm still (unfortunately) use my old script for PR.
You shall use the -master branch:
https://gitlab.denx.de/u-boot/custodians/u-boot-dfu/commits/masterI've written also the merge tag for this PR:
https://gitlab.denx.de/u-boot/custodians/u-boot-dfu/-/tags
Quoted 6 lines
Quoted 1 line
Sorry for inconvenience and confusion.
Marek, are there any issues with this PR?
Unfortunately, I did not noticed it being applied to your u-boot-usb tree. Do you need any help?
The USB tree was stuck due to multiple patchsets which had issues. It is unstuck now, so rebase the PR on u-boot-usb/master and resubmit it.
Thanks
Hi Marek,
Quoted 41 lines · Lukasz Majewski
Quoted 1 line
Hi Marek,
Hi,
Quoted 36 lines
Quoted 35 lines
Hi Marek,
Quoted 15 lines · Lukasz Majewski
Quoted 1 line
Dear Marek,
Hello Lukasz,
Quoted 10 lines
The following changes since commit
7a779ed1755c2d5011bd9598da90291f759ae760:travis: Exclude MIPS from the bcm job (2019-10-13 11:21:56
-0400)are available in the Git repository at:
git at gitlab.denx.de:u-boot/custodians/u-boot-dfu.git
Quoted 8 lines
Quoted 5 lines
for you to fetch changes up to
5d897631065bb2f36bbc1bd7fabb670ce5da3ce8:dfu: add callback for flush and initiated operation (2019-10-14 12:26:19 +0200)
Which branch shall I pull ? This information is missing from the PR, again :-(
Ach. I'm still (unfortunately) use my old script for PR.
You shall use the -master branch:
https://gitlab.denx.de/u-boot/custodians/u-boot-dfu/commits/masterI've written also the merge tag for this PR:
https://gitlab.denx.de/u-boot/custodians/u-boot-dfu/-/tagsSorry for inconvenience and confusion.
Quoted 7 lines
Quoted 4 lines
Marek, are there any issues with this PR?
Unfortunately, I did not noticed it being applied to your u-boot-usb tree. Do you need any help?
The USB tree was stuck due to multiple patchsets which had issues. It is unstuck now, so rebase the PR on u-boot-usb/master and resubmit it.
Thanks for the update. I will prepare updated PR.
Quoted 2 lines
Thanks
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191029/91cc770c/attachment.sig>
[U-Boot] [GIT] Pull request: u-boot-dfu (30.10.2019)
Hi Marek,
The following changes since commit7f0d5fa97074690dcbfcbc902f99c8dab0bff24d:
dwc3-generic: Don't fail probe if clk/reset entries are absent (2019-10-28 23:47:45 +0100)
are available in the Git repository at:
git at gitlab.denx.de:u-boot/custodians/u-boot-dfu.git
BRANCH: master
https://gitlab.denx.de/u-boot/custodians/u-boot-dfu/commits/master
Merge TAG:
https://gitlab.denx.de/u-boot/custodians/u-boot-dfu/-/tags/u-boot-dfu-30Oct2019
for you to fetch changes up to 60af9f0fc2e94d105c617cfa32a32ec411e23192:
dfu: add callback for flush and initiated operation (2019-10-30 10:00:29 +0100)
----------------------------------------------------------------
Marek Szyprowski (5):
gadget: f_thor: properly enable 3rd endpoint defined by the
protocol cmd: thor: select DFU subsystem also for 'thor' download tool
dfu: mmc: add support for in-partition offset
dwc3: flush cache only if there is a buffer attached to a request
thor: fix error path after g_dnl_register() failure
Patrick Delaunay (10):
dfu: cosmetic: cleanup sf to avoid checkpatch error
doc: dfu: Add dfu documentation
dfu: sf: add partition support for nor backend
dfu: prepare the support of multiple interface
dfu: allow to manage DFU on several devices
dfu: allow read with no data without error for EOF indication
dfu: add backend for MTD device
dfu: add partition support for MTD backend
dfu: add DFU virtual backend
dfu: add callback for flush and initiated operation
Ralph Siemsen (1):
dfu: dfu_nand: reduce verbosity
Travis-CI: https://travis-ci.org/lmajewski/u-boot-dfu/builds/604863805
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de -------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20191030/fe72c11e/attachment.sig>
[U-Boot] [GIT] Pull request: u-boot-dfu (30.10.2019)
Quoted 8 lines · Lukasz Majewski
Hi Marek,
The following changes since commit
7f0d5fa97074690dcbfcbc902f99c8dab0bff24d:dwc3-generic: Don't fail probe if clk/reset entries are absent (2019-10-28 23:47:45 +0100)
Quoted 6 lines
are available in the Git repository at:
git at gitlab.denx.de:u-boot/custodians/u-boot-dfu.git
BRANCH: master
https://gitlab.denx.de/u-boot/custodians/u-boot-dfu/commits/master
Pulled, thanks.