arm64: dts: rockchip: fix sdmmc detection on boot
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: fix sdmmc detection on boot
With working GPIO, during init the GPIO state s reset.
This causes the sdmmc regulator to shut down, preventing detection.
Removing and replacing the card will allow it to be detected, but that should not be necessary. Fix this by setting the regulator on at boot.
Signed-off-by Peter Geis <[email protected]>
--- arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 1 + 1 file changed, 1 insertion(+)
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +1 -0
@@ -35,6 +35,7 @@ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc0m1_gpio>; + regulator-boot-on; regulator-name = "vcc_sd"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>;
Signature · 1 line
2.20.1
Am Mittwoch, 16. Oktober 2019, 20:59:46 CET schrieb Peter Geis:
Quoted 6 lines
With working GPIO, during init the GPIO state s reset.
This causes the sdmmc regulator to shut down, preventing detection.
Removing and replacing the card will allow it to be detected, but that should not be necessary. Fix this by setting the regulator on at boot.Signed-off-by Peter Geis <[email protected]>
applied for 5.5
Thanks
Heiko