Skip to contentSkip to conversation

fjes: Handle workqueue allocation failure

PATCH Applied Will Deacon 2 participants 2 messages Oct 25, 2019 – Oct 29, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 fjes: Handle workqueue allocation failure

In the highly unlikely event that we fail to allocate either of the "/txrx" or "/control" workqueues, we should bail cleanly rather than blindly march on with NULL queue pointer(s) installed in the 'fjes_adapter' instance.

---

Compile-tested only.

 drivers/net/fjes/fjes_main.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
drivers/net/fjes/fjes_main.c +14 -1
index bbbc1dcb6ab5..b517c1af9de0 100644
@@ -1237,8 +1237,17 @@ static int fjes_probe(struct platform_device *plat_dev)
 	adapter->open_guard = false;
 
 	adapter->txrx_wq = alloc_workqueue(DRV_NAME "/txrx", WQ_MEM_RECLAIM, 0);
+	if (unlikely(!adapter->txrx_wq)) {
+		err = -ENOMEM;
+		goto err_free_netdev;
+	}
+
 	adapter->control_wq = alloc_workqueue(DRV_NAME "/control",
 					      WQ_MEM_RECLAIM, 0);
+	if (unlikely(!adapter->control_wq)) {
+		err = -ENOMEM;
+		goto err_free_txrx_wq;
+	}
 
 	INIT_WORK(&adapter->tx_stall_task, fjes_tx_stall_task);
 	INIT_WORK(&adapter->raise_intr_rxdata_task,
@@ -1255,7 +1264,7 @@ static int fjes_probe(struct platform_device *plat_dev)
 	hw->hw_res.irq = platform_get_irq(plat_dev, 0);
 	err = fjes_hw_init(&adapter->hw);
 	if (err)
-		goto err_free_netdev;
+		goto err_free_control_wq;
 
 	/* setup MAC address (02:00:00:00:00:[epid])*/
 	netdev->dev_addr[0] = 2;
@@ -1277,6 +1286,10 @@ static int fjes_probe(struct platform_device *plat_dev)
 
 err_hw_exit:
 	fjes_hw_exit(&adapter->hw);
+err_free_control_wq:
+	destroy_workqueue(adapter->control_wq);
+err_free_txrx_wq:
+	destroy_workqueue(adapter->txrx_wq);
 err_free_netdev:
 	free_netdev(netdev);
 err_out:
Signature · 1 line
2.24.0.rc0.303.g954a862665-goog
maintainer Applied
#1 lore raw

From: Will Deacon <[email protected]>
Date: Fri, 25 Oct 2019 12:06:02 +0100

Quoted 9 lines

In the highly unlikely event that we fail to allocate either of the "/txrx" or "/control" workqueues, we should bail cleanly rather than blindly march on with NULL queue pointer(s) installed in the 'fjes_adapter' instance.

Applied, thanks Will.