Skip to contentSkip to conversation

regulator: fan53555: add chip id for Silergy SYR83X

PATCH In review Vasily Khoruzhick 2 participants 2 messages Nov 6, 2019 Voltage and current regulator framework

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 regulator: fan53555: add chip id for Silergy SYR83X

SYR83X is used in Rockpro64 and it has die ID == 9. All other registers are the same as in SYR82X

---
 drivers/regulator/fan53555.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/regulator/fan53555.c +2 -0
index dbe477da4e55..00c83492f774 100644
@@ -83,6 +83,7 @@ enum {
 
 enum {
 	SILERGY_SYR82X = 8,
+	SILERGY_SYR83X = 9,
 };
 
 struct fan53555_device_info {
@@ -302,6 +303,7 @@ static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
 	/* Init voltage range and step */
 	switch (di->chip_id) {
 	case SILERGY_SYR82X:
+	case SILERGY_SYR83X:
 		di->vsel_min = 712500;
 		di->vsel_step = 12500;
 		break;
Signature · 1 line
2.23.0
maintainer
#1 lore raw

Applied "regulator: fan53555: add chip id for Silergy SYR83X" to the regulator tree

The patch

regulator: fan53555: add chip id for Silergy SYR83X

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.5

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From 5365e3df422938e6b34e1afdd2ff1cfc5768290e Mon Sep 17 00:00:00 2001
From: Vasily Khoruzhick <[email protected]>
Date: Wed, 6 Nov 2019 08:12:11 -0800
Subject: [PATCH] regulator: fan53555: add chip id for Silergy SYR83X

SYR83X is used in Rockpro64 and it has die ID == 9. All other registers are the same as in SYR82X

---
 drivers/regulator/fan53555.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/regulator/fan53555.c +2 -0
index dbe477da4e55..00c83492f774 100644
@@ -83,6 +83,7 @@ enum {
 
 enum {
 	SILERGY_SYR82X = 8,
+	SILERGY_SYR83X = 9,
 };
 
 struct fan53555_device_info {
@@ -302,6 +303,7 @@ static int fan53555_voltages_setup_silergy(struct fan53555_device_info *di)
 	/* Init voltage range and step */
 	switch (di->chip_id) {
 	case SILERGY_SYR82X:
+	case SILERGY_SYR83X:
 		di->vsel_min = 712500;
 		di->vsel_step = 12500;
 		break;
Signature · 1 line
2.20.1