Update sample configs to use modern cipher, remove static key examples
PATCH 1/1 Update sample configs to use modern cipher, remove static key examples
Since these are examples, people might use them as a basis for their own configs. In the non-push/pull configs, we should specify a decent cipher.
Further, I don't think we should recommend anyone to still use a static key configuration, so remove the static key config examples.
--- sample/sample-config-files/loopback-client | 1 + sample/sample-config-files/loopback-server | 1 + sample/sample-config-files/static-home.conf | 75 ------------------- sample/sample-config-files/static-office.conf | 72 ------------------ sample/sample-config-files/tls-home.conf | 12 +-- sample/sample-config-files/tls-office.conf | 3 + 6 files changed, 11 insertions(+), 153 deletions(-) delete mode 100644 sample/sample-config-files/static-home.conf delete mode 100644 sample/sample-config-files/static-office.conf
sample/sample-config-files/loopback-client +1 -0
@@ -22,5 +22,6 @@ ca sample-keys/ca.crt key sample-keys/client.key cert sample-keys/client.crt tls-auth sample-keys/ta.key 1 +cipher AES-256-GCM ping 1 inactive 120 10000000
sample/sample-config-files/loopback-server +1 -0
@@ -22,5 +22,6 @@ ca sample-keys/ca.crt key sample-keys/server.key cert sample-keys/server.crt tls-auth sample-keys/ta.key 0 +cipher AES-256-GCM ping 1 inactive 120 10000000
sample/sample-config-files/static-home.conf deleted +0 -75
75 lines not on this page · raw message
sample/sample-config-files/static-office.conf deleted +0 -72
72 lines not on this page · raw message
sample/sample-config-files/tls-home.conf +6 -6
@@ -4,12 +4,9 @@ # # '#' or ';' may be used to delimit comments. -# Use a dynamic tun device. -# For Linux 2.2 or non-Linux OSes, -# you may want to use an explicit -# unit number such as "tun1". -# OpenVPN also supports virtual -# ethernet "tap" devices. +# Use a dynamic tun device. For non-Linux OSes, you may want to use an +# explicit unit number such as "tun1". +# OpenVPN also supports virtual ethernet "tap" devices. dev tun # Our OpenVPN peer is the office gateway.
@@ -37,6 +34,9 @@ cert home.crt # Our private key key home.key +# Our data channel cipher (must match peer config) +cipher AES-256-GCM + # OpenVPN 2.0 uses UDP port 1194 by default # (official port assignment by iana.org 11/04). # OpenVPN 1.x uses UDP port 5000 by default.
sample/sample-config-files/tls-office.conf +3 -0
@@ -37,6 +37,9 @@ cert office.crt # Our private key key office.key +# Our data channel cipher (must match peer config) +cipher AES-256-GCM + # OpenVPN 2.0 uses UDP port 1194 by default # (official port assignment by iana.org 11/04). # OpenVPN 1.x uses UDP port 5000 by default.
Signature · 1 line
2.20.1
After a quick discussion in the group, we're all OK with kicking out static-key samples (only the samples, not the functionality yet) BUT we can't do the AES-256-GCM thing in 2.4 due to "RHEL6 and Debian 8" support (no AES-GCM there). So, master.
Your patch has been applied to the master branch.
commit ac10391f48e4ecc5c6db541e47bc747955ef1c93
Author: Steffan Karger Date: Sat Nov 9 18:42:35 2019 +0100
Update sample configs to use modern cipher, remove static key examples
Signed-off-by: Steffan Karger <[email protected]...>
Acked-by: Gert Doering <[email protected]...>
Message-Id: <[email protected]...>
URL: https://www.mail-archive.com/[email protected]/msg19081.html
Signed-off-by: Gert Doering <[email protected]...>--
kind regards,
Gert Doering