Fix generic/050 for filesystems without journal
v2 cover Fix generic/050 for filesystems without journal
Hello,
this is the second revision of the patches to fix test generic/050 for filesystems without journal (e.g. ext4 in nojournal mode) by converting the test to have alternate outputs. We also cleanup special handling of XFS with quotas in this test.
Honza
PATCH v2 1/3 generic/050: Fix test failure for filesystems without journal
Filesystems without journal can happily mount unrecovered filesystem read-only which confuses this test. Handle this by providing different expected output for filesystems without journal.
---
common/rc | 33 +++++++++++++++++++++++-------
tests/generic/050 | 8 ++++++++
tests/generic/050.cfg | 1 +
tests/generic/{050.out => 050.out.default} | 0
tests/generic/050.out.nojournal | 22 ++++++++++++++++++++
5 files changed, 57 insertions(+), 7 deletions(-)
create mode 100644 tests/generic/050.cfg
rename tests/generic/{050.out => 050.out.default} (100%)
create mode 100644 tests/generic/050.out.nojournalcommon/rc +26 -7
@@ -3159,7 +3159,7 @@ _require_norecovery() # It's possible that TEST_DEV and SCRATCH_DEV have different features (it'd be # odd, but possible) so check $TEST_DEV by default, but we can optionall pass # any dev we want. -_require_metadata_journaling() +_has_metadata_journaling() { if [ -z $1 ]; then local dev=$TEST_DEV
@@ -3169,26 +3169,37 @@ _require_metadata_journaling() case "$FSTYP" in ext2|vfat|msdos|udf) - _notrun "$FSTYP does not support metadata journaling" + echo "$FSTYP does not support metadata journaling" + return 1 ;; ext4) # ext4 could be mkfs'd without a journal... _require_dumpe2fs - $DUMPE2FS_PROG -h $dev 2>&1 | grep -q has_journal || \ - _notrun "$FSTYP on $dev not configured with metadata journaling" + $DUMPE2FS_PROG -h $dev 2>&1 | grep -q has_journal || { + echo "$FSTYP on $dev not configured with metadata journaling" + return 1 + } # ext4 might not load a journal - _exclude_scratch_mount_option "noload" + if _normalize_mount_options | grep -qw "noload"; then + echo "mount option \"noload\" not allowed in this test" + return 1 + fi ;; overlay) # metadata journaling check is based on base filesystem configurations # and because -overlay option saves those configurations to OVL_BASE_*, # adding restore/override the configurations before/after the check. if [ ! -z $OVL_BASE_FSTYP -a $OVL_BASE_FSTYP != "overlay" ]; then + local ret + _overlay_config_restore - _require_metadata_journaling + _has_metadata_journaling + ret=$? _overlay_config_override + return $ret else - _notrun "No metadata journaling support for legacy overlay setup" + echo "No metadata journaling support for legacy overlay setup" + return 1 fi ;; *)
@@ -3197,6 +3208,14 @@ _require_metadata_journaling() esac } +_require_metadata_journaling() +{ + msg=$(_has_metadata_journaling $@) + if [ -n "$msg" ]; then + _notrun "$msg" + fi +} + _count_extents() { $XFS_IO_PROG -c "fiemap" $1 | tail -n +2 | grep -v hole | wc -l
tests/generic/050 +8 -0
@@ -6,6 +6,7 @@ # # Check out various mount/remount/unmount scenarious on a read-only blockdev. # +seqfull=$0 seq=`basename $0` seqres=$RESULT_DIR/$seq echo "QA output created by $seq"
@@ -34,6 +35,13 @@ _require_scratch_shutdown _require_local_device $SCRATCH_DEV _require_norecovery +# Select appropriate output file +features="" +if ! _has_metadata_journaling $SCRATCH_DEV >/dev/null; then + features="nojournal" +fi +_link_out_file "$features" + _scratch_mkfs >/dev/null 2>&1 filter_ro_mount() {
tests/generic/050.cfg new file +1 -0
@@ -0,0 +1 @@ +nojournal: nojournal
tests/generic/050.out.default renamed from tests/generic/050.out +0 -0
tests/generic/050.out.nojournal new file +22 -0
@@ -0,0 +1,22 @@ +QA output created by 050 +setting device read-only +mounting read-only block device: +mount: device write-protected, mounting read-only +touching file on read-only filesystem (should fail) +touch: cannot touch 'SCRATCH_MNT/foo': Read-only file system +unmounting read-only filesystem +setting device read-write +mounting read-write block device: +touch files +going down: +unmounting shutdown filesystem: +setting device read-only +mounting filesystem that needs recovery on a read-only device: +mount: device write-protected, mounting read-only +unmounting read-only filesystem +mounting filesystem with -o norecovery on a read-only device: +mount: device write-protected, mounting read-only +unmounting read-only filesystem +setting device read-write +mounting filesystem that needs recovery with -o ro: +*** done
Signature · 1 line
2.16.4
PATCH v2 2/3 generic/050: Handle xfs quota special case with different output
In reply to Jan KaraInstead of faking output for the case of XFS with quotas, just use a different output file with appropriate output.
--- tests/generic/050 | 62 ++++++++++++------------------------------ tests/generic/050.cfg | 1 + tests/generic/050.out.xfsquota | 25 +++++++++++++++++ 3 files changed, 43 insertions(+), 45 deletions(-) create mode 100644 tests/generic/050.out.xfsquota
tests/generic/050 +17 -45
@@ -39,27 +39,15 @@ _require_norecovery features="" if ! _has_metadata_journaling $SCRATCH_DEV >/dev/null; then features="nojournal" +elif [ "$FSTYP" = "xfs" ] && echo "$MOUNT_OPTIONS" | grep -q quota ; then + # Mounting with quota on XFS requires a writable fs, which means + # we expect to fail the ro blockdev test with with EPERM. + features="xfsquota" fi _link_out_file "$features" _scratch_mkfs >/dev/null 2>&1 -filter_ro_mount() { - local arg="" - - if [ -n "$expect_mount_failure" ]; then - arg="s|mount: $SCRATCH_MNT: permission denied|mount: device write-protected, mounting read-only|g" - fi - sed -e "$arg" | _filter_ro_mount -} - -# Mounting with quota on XFS requires a writable fs, which means -# we expect to fail the ro blockdev test with with EPERM. -expect_mount_failure= -if [ "$FSTYP" = "xfs" ] && echo "$MOUNT_OPTIONS" | grep -q quota ; then - expect_mount_failure=1 -fi - # # Mark the device read-only #
@@ -70,25 +58,16 @@ blockdev --setro $SCRATCH_DEV # Mount it, and make sure we can't write to it, and we can unmount it again # echo "mounting read-only block device:" -_try_scratch_mount 2>&1 | filter_ro_mount -if [ "${PIPESTATUS[0]}" -eq 0 ]; then - echo "touching file on read-only filesystem (should fail)" - touch $SCRATCH_MNT/foo 2>&1 | _filter_scratch - - # - # Apparently this used to be broken at some point: - # http://oss.sgi.com/bugzilla/show_bug.cgi?id=807 - # - echo "unmounting read-only filesystem" - _scratch_unmount 2>&1 | _filter_scratch -elif [ -n "${expect_mount_failure}" ]; then - # Mount failed, so simulate EROFS instead of scribbling on root fs - echo "touching file on read-only filesystem (should fail)" - echo "touch: cannot touch 'SCRATCH_MNT/foo': Read-only file system" - echo "unmounting read-only filesystem" -else - echo "Mount failed, though it wasn't supposed to!" -fi +_try_scratch_mount 2>&1 | _filter_ro_mount +echo "touching file on read-only filesystem (should fail)" +touch $SCRATCH_MNT/foo 2>&1 | _filter_scratch + +# +# Apparently this used to be broken at some point: +# http://oss.sgi.com/bugzilla/show_bug.cgi?id=807 +# +echo "unmounting read-only filesystem" +_scratch_unmount 2>&1 | _filter_scratch echo "setting device read-write" blockdev --setrw $SCRATCH_DEV
@@ -124,16 +103,9 @@ _scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot # data recovery hack. # echo "mounting filesystem with -o norecovery on a read-only device:" -_try_scratch_mount -o norecovery 2>&1 | filter_ro_mount -if [ "${PIPESTATUS[0]}" -eq 0 ]; then - echo "unmounting read-only filesystem" - _scratch_unmount 2>&1 | _filter_scratch -elif [ -n "${expect_mount_failure}" ]; then - # Mount failed, simulate correct output - echo "unmounting read-only filesystem" -else - echo "Mount failed, though it wasn't supposed to!" -fi +_try_scratch_mount -o norecovery 2>&1 | _filter_ro_mount +echo "unmounting read-only filesystem" +_scratch_unmount 2>&1 | _filter_scratch echo "setting device read-write" blockdev --setrw $SCRATCH_DEV
tests/generic/050.cfg +1 -0
@@ -1 +1,2 @@ nojournal: nojournal +xfsquota: xfsquota
tests/generic/050.out.xfsquota new file +25 -0
@@ -0,0 +1,25 @@ +QA output created by 050 +setting device read-only +mounting read-only block device: +mount: /mnt-scratch: permission denied +touching file on read-only filesystem (should fail) +unmounting read-only filesystem +umount: SCRATCH_DEV: not mounted. +setting device read-write +mounting read-write block device: +touch files +going down: +unmounting shutdown filesystem: +setting device read-only +mounting filesystem that needs recovery on a read-only device: +mount: device write-protected, mounting read-only +mount: cannot mount device read-only +unmounting read-only filesystem +umount: SCRATCH_DEV: not mounted +mounting filesystem with -o norecovery on a read-only device: +mount: /mnt-scratch: permission denied +unmounting read-only filesystem +umount: SCRATCH_DEV: not mounted. +setting device read-write +mounting filesystem that needs recovery with -o ro: +*** done
Signature · 1 line
2.16.4
PATCH v2 3/3 generic/050: Consistently remove traling dot from umount output
In reply to Jan KaraWe did not consistently remove trailing dot from umount output which can presumably lead to false failures with particular versions of util-linux. Make sure all umount output is properly filtered.
--- tests/generic/050 | 4 ++-- tests/generic/050.out.xfsquota | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
tests/generic/050 +2 -2
@@ -67,7 +67,7 @@ touch $SCRATCH_MNT/foo 2>&1 | _filter_scratch # http://oss.sgi.com/bugzilla/show_bug.cgi?id=807 # echo "unmounting read-only filesystem" -_scratch_unmount 2>&1 | _filter_scratch +_scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot echo "setting device read-write" blockdev --setrw $SCRATCH_DEV
@@ -105,7 +105,7 @@ _scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot echo "mounting filesystem with -o norecovery on a read-only device:" _try_scratch_mount -o norecovery 2>&1 | _filter_ro_mount echo "unmounting read-only filesystem" -_scratch_unmount 2>&1 | _filter_scratch +_scratch_unmount 2>&1 | _filter_scratch | _filter_ending_dot echo "setting device read-write" blockdev --setrw $SCRATCH_DEV
tests/generic/050.out.xfsquota +2 -2
@@ -4,7 +4,7 @@ mounting read-only block device: mount: /mnt-scratch: permission denied touching file on read-only filesystem (should fail) unmounting read-only filesystem -umount: SCRATCH_DEV: not mounted. +umount: SCRATCH_DEV: not mounted setting device read-write mounting read-write block device: touch files
@@ -19,7 +19,7 @@ umount: SCRATCH_DEV: not mounted mounting filesystem with -o norecovery on a read-only device: mount: /mnt-scratch: permission denied unmounting read-only filesystem -umount: SCRATCH_DEV: not mounted. +umount: SCRATCH_DEV: not mounted setting device read-write mounting filesystem that needs recovery with -o ro: *** done
Signature · 1 line
2.16.4