regulator: stpmic1: Set a default ramp delay value
PATCH 1/1 regulator: stpmic1: Set a default ramp delay value
Set a default ramp delay value to the regulators with the worst case value.
--- drivers/regulator/stpmic1_regulator.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/regulator/stpmic1_regulator.c +6 -0
@@ -54,6 +54,8 @@ enum {/* Enable time worst case is 5000mV/(2250uV/uS) */ #define PMIC_ENABLE_TIME_US 2200 +/* Ramp delay worst case is (2250uV/uS) */ +#define PMIC_RAMP_DELAY 2200static const struct regulator_linear_range buck1_ranges[] = {REGULATOR_LINEAR_RANGE (725000 ,0 ,4 ,0 ),
@@ -208,6 +210,7 @@ static const struct regulator_ops stpmic1_switch_regul_ops = { .enable_val = 1, \ .disable_val = 0, \ .enable_time = PMIC_ENABLE_TIME_US, \ + .ramp_delay = PMIC_RAMP_DELAY, \ .supply_name = #base, \ }
@@ -227,6 +230,7 @@ static const struct regulator_ops stpmic1_switch_regul_ops = { .enable_val = 1, \ .disable_val = 0, \ .enable_time = PMIC_ENABLE_TIME_US, \ + .ramp_delay = PMIC_RAMP_DELAY, \ .bypass_reg = LDO3_ACTIVE_CR, \ .bypass_mask = LDO_BYPASS_MASK, \ .bypass_val_on = LDO_BYPASS_MASK, \
@@ -248,6 +252,7 @@ static const struct regulator_ops stpmic1_switch_regul_ops = { .enable_val = 1, \ .disable_val = 0, \ .enable_time = PMIC_ENABLE_TIME_US, \ + .ramp_delay = PMIC_RAMP_DELAY, \ .supply_name = #base, \ }
@@ -267,6 +272,7 @@ static const struct regulator_ops stpmic1_switch_regul_ops = { .enable_val = 1, \ .disable_val = 0, \ .enable_time = PMIC_ENABLE_TIME_US, \ + .ramp_delay = PMIC_RAMP_DELAY, \ .of_map_mode = stpmic1_map_mode, \ .pull_down_reg = ids##_PULL_DOWN_REG, \ .pull_down_mask = ids##_PULL_DOWN_MASK, \
Signature · 1 line
2.17.1
Mark Brown
maintainerApplied "regulator: stpmic1: Set a default ramp delay value" to the regulator tree
The patch
regulator: stpmic1: Set a default ramp delay value
has been applied to the regulator tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.5
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 9ebde17c5d0387a5e1f71e687ac35d36e01208cc Mon Sep 17 00:00:00 2001
From: Pascal Paillet <[email protected]>
Date: Wed, 13 Nov 2019 17:15:29 +0100
Subject: [PATCH] regulator: stpmic1: Set a default ramp delay value
Set a default ramp delay value to the regulators with the worst case value.
--- drivers/regulator/stpmic1_regulator.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/regulator/stpmic1_regulator.c +6 -0
@@ -54,6 +54,8 @@ enum {/* Enable time worst case is 5000mV/(2250uV/uS) */ #define PMIC_ENABLE_TIME_US 2200 +/* Ramp delay worst case is (2250uV/uS) */ +#define PMIC_RAMP_DELAY 2200static const struct regulator_linear_range buck1_ranges[] = {REGULATOR_LINEAR_RANGE (725000 ,0 ,4 ,0 ),
@@ -208,6 +210,7 @@ static const struct regulator_ops stpmic1_switch_regul_ops = { .enable_val = 1, \ .disable_val = 0, \ .enable_time = PMIC_ENABLE_TIME_US, \ + .ramp_delay = PMIC_RAMP_DELAY, \ .supply_name = #base, \ }
@@ -227,6 +230,7 @@ static const struct regulator_ops stpmic1_switch_regul_ops = { .enable_val = 1, \ .disable_val = 0, \ .enable_time = PMIC_ENABLE_TIME_US, \ + .ramp_delay = PMIC_RAMP_DELAY, \ .bypass_reg = LDO3_ACTIVE_CR, \ .bypass_mask = LDO_BYPASS_MASK, \ .bypass_val_on = LDO_BYPASS_MASK, \
@@ -248,6 +252,7 @@ static const struct regulator_ops stpmic1_switch_regul_ops = { .enable_val = 1, \ .disable_val = 0, \ .enable_time = PMIC_ENABLE_TIME_US, \ + .ramp_delay = PMIC_RAMP_DELAY, \ .supply_name = #base, \ }
@@ -267,6 +272,7 @@ static const struct regulator_ops stpmic1_switch_regul_ops = { .enable_val = 1, \ .disable_val = 0, \ .enable_time = PMIC_ENABLE_TIME_US, \ + .ramp_delay = PMIC_RAMP_DELAY, \ .of_map_mode = stpmic1_map_mode, \ .pull_down_reg = ids##_PULL_DOWN_REG, \ .pull_down_mask = ids##_PULL_DOWN_MASK, \
Signature · 1 line
2.20.1