Skip to contentSkip to conversation

spi: tegra20-slink: add missed clk_unprepare

PATCH In review Chuhong Yuan 2 participants 2 messages Nov 15, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 spi: tegra20-slink: add missed clk_unprepare

The driver misses calling clk_unprepare in probe failure and remove. Add the calls to fix it.

---
 drivers/spi/spi-tegra20-slink.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/spi/spi-tegra20-slink.c +4 -1
index 111fffc91435..374a2a32edcd 100644
@@ -1073,7 +1073,7 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	ret = clk_enable(tspi->clk);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Clock enable failed %d\n", ret);
-		goto exit_free_master;
+		goto exit_clk_unprepare;
 	}
 
 	spi_irq = platform_get_irq(pdev, 0);
@@ -1146,6 +1146,8 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	free_irq(spi_irq, tspi);
 exit_clk_disable:
 	clk_disable(tspi->clk);
+exit_clk_unprepare:
+	clk_unprepare(tspi->clk);
 exit_free_master:
 	spi_master_put(master);
 	return ret;
@@ -1159,6 +1161,7 @@ static int tegra_slink_remove(struct platform_device *pdev)
 	free_irq(tspi->irq, tspi);
 
 	clk_disable(tspi->clk);
+	clk_unprepare(tspi->clk);
 
 	if (tspi->tx_dma_chan)
 		tegra_slink_deinit_dma_param(tspi, false);
Signature · 1 line
2.24.0
maintainer
#1 lore raw

Applied "spi: tegra20-slink: add missed clk_unprepare" to the spi tree

The patch

spi: tegra20-slink: add missed clk_unprepare

has been applied to the spi tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.5

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 04358e40ba96d687c0811c21d9dede73f5244a98 Mon Sep 17 00:00:00 2001

From: Chuhong Yuan <[email protected]>
Date: Fri, 15 Nov 2019 16:31:22 +0800
Subject: [PATCH] spi: tegra20-slink: add missed clk_unprepare

The driver misses calling clk_unprepare in probe failure and remove. Add the calls to fix it.

---
 drivers/spi/spi-tegra20-slink.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/spi/spi-tegra20-slink.c +4 -1
index 51573f41ed12..7f4d932dade7 100644
@@ -1072,7 +1072,7 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	ret = clk_enable(tspi->clk);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Clock enable failed %d\n", ret);
-		goto exit_free_master;
+		goto exit_clk_unprepare;
 	}
 
 	spi_irq = platform_get_irq(pdev, 0);
@@ -1145,6 +1145,8 @@ static int tegra_slink_probe(struct platform_device *pdev)
 	free_irq(spi_irq, tspi);
 exit_clk_disable:
 	clk_disable(tspi->clk);
+exit_clk_unprepare:
+	clk_unprepare(tspi->clk);
 exit_free_master:
 	spi_master_put(master);
 	return ret;
@@ -1158,6 +1160,7 @@ static int tegra_slink_remove(struct platform_device *pdev)
 	free_irq(tspi->irq, tspi);
 
 	clk_disable(tspi->clk);
+	clk_unprepare(tspi->clk);
 
 	if (tspi->tx_dma_chan)
 		tegra_slink_deinit_dma_param(tspi, false);
Signature · 1 line
2.20.1