Skip to contentSkip to conversation

x86/insn: Add some Intel instructions to the opcode map

PATCH Applied Adrian Hunter 4 participants 7 messages Nov 15, 2019 – Nov 19, 2019

Subsystems (2)
lore
Share & tools
lore

Adrian Hunter

author reviewer
#0 lore raw

cover x86/insn: Add some Intel instructions to the opcode map

Hi

Here is a patch to update the x86 opcode map, and a patch to update the perf tools' "new instructions" test accordingly.

There are still a lot of AVX instructions to add and also CET instructions, which Yu-cheng is adding.

Adrian Hunter (2):
x86/insn: perf tools: Add some instructions to the new instructions test x86/insn: Add some Intel instructions to the opcode map

 arch/x86/lib/x86-opcode-map.txt              |  18 +++--
 tools/arch/x86/lib/x86-opcode-map.txt        |  18 +++--
 tools/perf/arch/x86/tests/insn-x86-dat-32.c  |  52 +++++++++++++
 tools/perf/arch/x86/tests/insn-x86-dat-64.c  |  62 +++++++++++++++
 tools/perf/arch/x86/tests/insn-x86-dat-src.c | 109 +++++++++++++++++++++++++++
 5 files changed, 247 insertions(+), 12 deletions(-)

Regards
Adrian

author reviewer
#1 lore raw

PATCH 1/2 x86/insn: perf tools: Add some instructions to the new instructions test

Add to the "x86 instruction decoder - new instructions" test the following instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd

For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037).

---
 tools/perf/arch/x86/tests/insn-x86-dat-32.c  |  52 +++++++++
 tools/perf/arch/x86/tests/insn-x86-dat-64.c  |  62 +++++++++++
 tools/perf/arch/x86/tests/insn-x86-dat-src.c | 109 +++++++++++++++++++
 3 files changed, 223 insertions(+)
tools/perf/arch/x86/tests/insn-x86-dat-32.c +52 -0
index fab3c6de73fa..58f8f2a095c4 100644
@@ -1647,6 +1647,12 @@
 "0f ae 30             \txsaveopt (%eax)",},
 {{0x0f, 0xae, 0xf0, }, 3, 0, "", "",
 "0f ae f0             \tmfence ",},
+{{0x0f, 0x1c, 0x00, }, 3, 0, "", "",
+"0f 1c 00             \tcldemote (%eax)",},
+{{0x0f, 0x1c, 0x05, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "",
+"0f 1c 05 78 56 34 12 \tcldemote 0x12345678",},
+{{0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%eax,%ecx,8)",},
 {{0x0f, 0xc7, 0x20, }, 3, 0, "", "",
 "0f c7 20             \txsavec (%eax)",},
 {{0x0f, 0xc7, 0x25, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "",
@@ -1677,3 +1683,49 @@
 "f3 0f ae 25 78 56 34 12 \tptwritel 0x12345678",},
 {{0xf3, 0x0f, 0xae, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
 "f3 0f ae a4 c8 78 56 34 12 \tptwritel 0x12345678(%eax,%ecx,8)",},
+{{0x66, 0x0f, 0xae, 0xf3, }, 4, 0, "", "",
+"66 0f ae f3          \ttpause %ebx",},
+{{0x67, 0xf3, 0x0f, 0xae, 0xf0, }, 5, 0, "", "",
+"67 f3 0f ae f0       \tumonitor %ax",},
+{{0xf3, 0x0f, 0xae, 0xf0, }, 4, 0, "", "",
+"f3 0f ae f0          \tumonitor %eax",},
+{{0xf2, 0x0f, 0xae, 0xf0, }, 4, 0, "", "",
+"f2 0f ae f0          \tumwait %eax",},
+{{0x0f, 0x38, 0xf9, 0x03, }, 4, 0, "", "",
+"0f 38 f9 03          \tmovdiri %eax,(%ebx)",},
+{{0x0f, 0x38, 0xf9, 0x88, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f 38 f9 88 78 56 34 12 \tmovdiri %ecx,0x12345678(%eax)",},
+{{0x66, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"66 0f 38 f8 18       \tmovdir64b (%eax),%ebx",},
+{{0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%eax),%ecx",},
+{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "",
+"67 66 0f 38 f8 1c    \tmovdir64b (%si),%bx",},
+{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "",
+"67 66 0f 38 f8 8c 34 12 \tmovdir64b 0x1234(%si),%cx",},
+{{0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"f2 0f 38 f8 18       \tenqcmd (%eax),%ebx",},
+{{0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%eax),%ecx",},
+{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "",
+"67 f2 0f 38 f8 1c    \tenqcmd (%si),%bx",},
+{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "",
+"67 f2 0f 38 f8 8c 34 12 \tenqcmd 0x1234(%si),%cx",},
+{{0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"f3 0f 38 f8 18       \tenqcmds (%eax),%ebx",},
+{{0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%eax),%ecx",},
+{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "",
+"67 f3 0f 38 f8 1c    \tenqcmds (%si),%bx",},
+{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "",
+"67 f3 0f 38 f8 8c 34 12 \tenqcmds 0x1234(%si),%cx",},
+{{0x0f, 0x01, 0xcf, }, 3, 0, "", "",
+"0f 01 cf             \tencls  ",},
+{{0x0f, 0x01, 0xd7, }, 3, 0, "", "",
+"0f 01 d7             \tenclu  ",},
+{{0x0f, 0x01, 0xc0, }, 3, 0, "", "",
+"0f 01 c0             \tenclv  ",},
+{{0x0f, 0x01, 0xc5, }, 3, 0, "", "",
+"0f 01 c5             \tpconfig ",},
+{{0xf3, 0x0f, 0x09, }, 3, 0, "", "",
+"f3 0f 09             \twbnoinvd ",},
tools/perf/arch/x86/tests/insn-x86-dat-64.c +62 -0

71 lines not on this page · raw message

tools/perf/arch/x86/tests/insn-x86-dat-src.c +109 -0

135 lines not on this page · raw message

Signature · 1 line
2.17.1
author reviewer
#3 lore raw

PATCH 2/2 x86/insn: Add some Intel instructions to the opcode map

In reply to Adrian Hunter

Add to the opcode map the following instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd

For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037).

The instruction decoding can be tested using the perf tools' "x86 instruction decoder - new instructions" test as folllows:

  $ perf test -v "new " 2>&1 | grep -i cldemote
  Decoded ok: 0f 1c 00                    cldemote (%eax)
  Decoded ok: 0f 1c 05 78 56 34 12        cldemote 0x12345678
  Decoded ok: 0f 1c 84 c8 78 56 34 12     cldemote 0x12345678(%eax,%ecx,8)
  Decoded ok: 0f 1c 00                    cldemote (%rax)
  Decoded ok: 41 0f 1c 00                 cldemote (%r8)
  Decoded ok: 0f 1c 04 25 78 56 34 12     cldemote 0x12345678
  Decoded ok: 0f 1c 84 c8 78 56 34 12     cldemote 0x12345678(%rax,%rcx,8)
  Decoded ok: 41 0f 1c 84 c8 78 56 34 12  cldemote 0x12345678(%r8,%rcx,8)
  $ perf test -v "new " 2>&1 | grep -i tpause
  Decoded ok: 66 0f ae f3                 tpause %ebx
  Decoded ok: 66 0f ae f3                 tpause %ebx
  Decoded ok: 66 41 0f ae f0              tpause %r8d
  $ perf test -v "new " 2>&1 | grep -i umonitor
  Decoded ok: 67 f3 0f ae f0              umonitor %ax
  Decoded ok: f3 0f ae f0                 umonitor %eax
  Decoded ok: 67 f3 0f ae f0              umonitor %eax
  Decoded ok: f3 0f ae f0                 umonitor %rax
  Decoded ok: 67 f3 41 0f ae f0           umonitor %r8d
  $ perf test -v "new " 2>&1 | grep -i umwait
  Decoded ok: f2 0f ae f0                 umwait %eax
  Decoded ok: f2 0f ae f0                 umwait %eax
  Decoded ok: f2 41 0f ae f0              umwait %r8d
  $ perf test -v "new " 2>&1 | grep -i movdiri
  Decoded ok: 0f 38 f9 03                 movdiri %eax,(%ebx)
  Decoded ok: 0f 38 f9 88 78 56 34 12     movdiri %ecx,0x12345678(%eax)
  Decoded ok: 48 0f 38 f9 03              movdiri %rax,(%rbx)
  Decoded ok: 48 0f 38 f9 88 78 56 34 12  movdiri %rcx,0x12345678(%rax)
  $ perf test -v "new " 2>&1 | grep -i movdir64b
  Decoded ok: 66 0f 38 f8 18              movdir64b (%eax),%ebx
  Decoded ok: 66 0f 38 f8 88 78 56 34 12  movdir64b 0x12345678(%eax),%ecx
  Decoded ok: 67 66 0f 38 f8 1c           movdir64b (%si),%bx
  Decoded ok: 67 66 0f 38 f8 8c 34 12     movdir64b 0x1234(%si),%cx
  Decoded ok: 66 0f 38 f8 18              movdir64b (%rax),%rbx
  Decoded ok: 66 0f 38 f8 88 78 56 34 12  movdir64b 0x12345678(%rax),%rcx
  Decoded ok: 67 66 0f 38 f8 18           movdir64b (%eax),%ebx
  Decoded ok: 67 66 0f 38 f8 88 78 56 34 12       movdir64b 0x12345678(%eax),%ecx
  $ perf test -v "new " 2>&1 | grep -i enqcmd
  Decoded ok: f2 0f 38 f8 18              enqcmd (%eax),%ebx
  Decoded ok: f2 0f 38 f8 88 78 56 34 12  enqcmd 0x12345678(%eax),%ecx
  Decoded ok: 67 f2 0f 38 f8 1c           enqcmd (%si),%bx
  Decoded ok: 67 f2 0f 38 f8 8c 34 12     enqcmd 0x1234(%si),%cx
  Decoded ok: f3 0f 38 f8 18              enqcmds (%eax),%ebx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%eax),%ecx
  Decoded ok: 67 f3 0f 38 f8 1c           enqcmds (%si),%bx
  Decoded ok: 67 f3 0f 38 f8 8c 34 12     enqcmds 0x1234(%si),%cx
  Decoded ok: f2 0f 38 f8 18              enqcmd (%rax),%rbx
  Decoded ok: f2 0f 38 f8 88 78 56 34 12  enqcmd 0x12345678(%rax),%rcx
  Decoded ok: 67 f2 0f 38 f8 18           enqcmd (%eax),%ebx
  Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12       enqcmd 0x12345678(%eax),%ecx
  Decoded ok: f3 0f 38 f8 18              enqcmds (%rax),%rbx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%rax),%rcx
  Decoded ok: 67 f3 0f 38 f8 18           enqcmds (%eax),%ebx
  Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12       enqcmds 0x12345678(%eax),%ecx
  $ perf test -v "new " 2>&1 | grep -i enqcmds
  Decoded ok: f3 0f 38 f8 18              enqcmds (%eax),%ebx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%eax),%ecx
  Decoded ok: 67 f3 0f 38 f8 1c           enqcmds (%si),%bx
  Decoded ok: 67 f3 0f 38 f8 8c 34 12     enqcmds 0x1234(%si),%cx
  Decoded ok: f3 0f 38 f8 18              enqcmds (%rax),%rbx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%rax),%rcx
  Decoded ok: 67 f3 0f 38 f8 18           enqcmds (%eax),%ebx
  Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12       enqcmds 0x12345678(%eax),%ecx
  $ perf test -v "new " 2>&1 | grep -i encls
  Decoded ok: 0f 01 cf                    encls
  Decoded ok: 0f 01 cf                    encls
  $ perf test -v "new " 2>&1 | grep -i enclu
  Decoded ok: 0f 01 d7                    enclu
  Decoded ok: 0f 01 d7                    enclu
  $ perf test -v "new " 2>&1 | grep -i enclv
  Decoded ok: 0f 01 c0                    enclv
  Decoded ok: 0f 01 c0                    enclv
  $ perf test -v "new " 2>&1 | grep -i pconfig
  Decoded ok: 0f 01 c5                    pconfig
  Decoded ok: 0f 01 c5                    pconfig
  $ perf test -v "new " 2>&1 | grep -i wbnoinvd
  Decoded ok: f3 0f 09                    wbnoinvd
  Decoded ok: f3 0f 09                    wbnoinvd
---
 arch/x86/lib/x86-opcode-map.txt       | 18 ++++++++++++------
 tools/arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------
 2 files changed, 24 insertions(+), 12 deletions(-)
arch/x86/lib/x86-opcode-map.txt +12 -6
index e0b85930dd77..0a0e9112f284 100644
@@ -333,7 +333,7 @@ AVXcode: 1
 06: CLTS
 07: SYSRET (o64)
 08: INVD
-09: WBINVD
+09: WBINVD | WBNOINVD (F3)
 0a:
 0b: UD2 (1B)
 0c:
@@ -364,7 +364,7 @@ AVXcode: 1
 # a ModR/M byte.
 1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev
 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
-1c:
+1c: Grp20 (1A),(1C)
 1d:
 1e:
 1f: NOP Ev
@@ -792,6 +792,8 @@ f3: Grp17 (1A)
 f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
 f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
 f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
+f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3)
+f9: MOVDIRI My,Gy
 EndTable
 
 Table: 3-byte opcode 2 (0x0f 0x3a)
@@ -943,9 +945,9 @@ GrpTable: Grp6
 EndTable
 
 GrpTable: Grp7
-0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
-1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
+0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
 3: LIDT Ms
 4: SMSW Mw/Rv
 5: rdpkru (110),(11B) | wrpkru (111),(11B)
@@ -1020,7 +1022,7 @@ GrpTable: Grp15
 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
 4: XSAVE | ptwrite Ey (F3),(11B)
 5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B)
 7: clflush | clflushopt (66) | sfence (11B)
 EndTable
 
@@ -1051,6 +1053,10 @@ GrpTable: Grp19
 6: vscatterpf1qps/d Wx (66),(ev)
 EndTable
 
+GrpTable: Grp20
+0: cldemote Mb
+EndTable
+
 # AMD's Prefetch Group
 GrpTable: GrpP
 0: PREFETCH
tools/arch/x86/lib/x86-opcode-map.txt +12 -6
index e0b85930dd77..0a0e9112f284 100644
@@ -333,7 +333,7 @@ AVXcode: 1
 06: CLTS
 07: SYSRET (o64)
 08: INVD
-09: WBINVD
+09: WBINVD | WBNOINVD (F3)
 0a:
 0b: UD2 (1B)
 0c:
@@ -364,7 +364,7 @@ AVXcode: 1
 # a ModR/M byte.
 1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev
 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
-1c:
+1c: Grp20 (1A),(1C)
 1d:
 1e:
 1f: NOP Ev
@@ -792,6 +792,8 @@ f3: Grp17 (1A)
 f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
 f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
 f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
+f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3)
+f9: MOVDIRI My,Gy
 EndTable
 
 Table: 3-byte opcode 2 (0x0f 0x3a)
@@ -943,9 +945,9 @@ GrpTable: Grp6
 EndTable
 
 GrpTable: Grp7
-0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
-1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
+0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
 3: LIDT Ms
 4: SMSW Mw/Rv
 5: rdpkru (110),(11B) | wrpkru (111),(11B)
@@ -1020,7 +1022,7 @@ GrpTable: Grp15
 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
 4: XSAVE | ptwrite Ey (F3),(11B)
 5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B)
 7: clflush | clflushopt (66) | sfence (11B)
 EndTable
 
@@ -1051,6 +1053,10 @@ GrpTable: Grp19
 6: vscatterpf1qps/d Wx (66),(ev)
 EndTable
 
+GrpTable: Grp20
+0: cldemote Mb
+EndTable
+
 # AMD's Prefetch Group
 GrpTable: GrpP
 0: PREFETCH
Signature · 1 line
2.17.1
Acked-by on v1 2/2
#4 lore raw

Hi Adrian,

Quoted 92 lines · On Fri, 15 Nov 2019 15:54:47 +0200 Adrian Hunter <[email protected]>…

Add to the opcode map the following instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd

For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037).

The instruction decoding can be tested using the perf tools' "x86 instruction decoder - new instructions" test as folllows:

  $ perf test -v "new " 2>&1 | grep -i cldemote
  Decoded ok: 0f 1c 00                    cldemote (%eax)
  Decoded ok: 0f 1c 05 78 56 34 12        cldemote 0x12345678
  Decoded ok: 0f 1c 84 c8 78 56 34 12     cldemote 0x12345678(%eax,%ecx,8)
  Decoded ok: 0f 1c 00                    cldemote (%rax)
  Decoded ok: 41 0f 1c 00                 cldemote (%r8)
  Decoded ok: 0f 1c 04 25 78 56 34 12     cldemote 0x12345678
  Decoded ok: 0f 1c 84 c8 78 56 34 12     cldemote 0x12345678(%rax,%rcx,8)
  Decoded ok: 41 0f 1c 84 c8 78 56 34 12  cldemote 0x12345678(%r8,%rcx,8)
  $ perf test -v "new " 2>&1 | grep -i tpause
  Decoded ok: 66 0f ae f3                 tpause %ebx
  Decoded ok: 66 0f ae f3                 tpause %ebx
  Decoded ok: 66 41 0f ae f0              tpause %r8d
  $ perf test -v "new " 2>&1 | grep -i umonitor
  Decoded ok: 67 f3 0f ae f0              umonitor %ax
  Decoded ok: f3 0f ae f0                 umonitor %eax
  Decoded ok: 67 f3 0f ae f0              umonitor %eax
  Decoded ok: f3 0f ae f0                 umonitor %rax
  Decoded ok: 67 f3 41 0f ae f0           umonitor %r8d
  $ perf test -v "new " 2>&1 | grep -i umwait
  Decoded ok: f2 0f ae f0                 umwait %eax
  Decoded ok: f2 0f ae f0                 umwait %eax
  Decoded ok: f2 41 0f ae f0              umwait %r8d
  $ perf test -v "new " 2>&1 | grep -i movdiri
  Decoded ok: 0f 38 f9 03                 movdiri %eax,(%ebx)
  Decoded ok: 0f 38 f9 88 78 56 34 12     movdiri %ecx,0x12345678(%eax)
  Decoded ok: 48 0f 38 f9 03              movdiri %rax,(%rbx)
  Decoded ok: 48 0f 38 f9 88 78 56 34 12  movdiri %rcx,0x12345678(%rax)
  $ perf test -v "new " 2>&1 | grep -i movdir64b
  Decoded ok: 66 0f 38 f8 18              movdir64b (%eax),%ebx
  Decoded ok: 66 0f 38 f8 88 78 56 34 12  movdir64b 0x12345678(%eax),%ecx
  Decoded ok: 67 66 0f 38 f8 1c           movdir64b (%si),%bx
  Decoded ok: 67 66 0f 38 f8 8c 34 12     movdir64b 0x1234(%si),%cx
  Decoded ok: 66 0f 38 f8 18              movdir64b (%rax),%rbx
  Decoded ok: 66 0f 38 f8 88 78 56 34 12  movdir64b 0x12345678(%rax),%rcx
  Decoded ok: 67 66 0f 38 f8 18           movdir64b (%eax),%ebx
  Decoded ok: 67 66 0f 38 f8 88 78 56 34 12       movdir64b 0x12345678(%eax),%ecx
  $ perf test -v "new " 2>&1 | grep -i enqcmd
  Decoded ok: f2 0f 38 f8 18              enqcmd (%eax),%ebx
  Decoded ok: f2 0f 38 f8 88 78 56 34 12  enqcmd 0x12345678(%eax),%ecx
  Decoded ok: 67 f2 0f 38 f8 1c           enqcmd (%si),%bx
  Decoded ok: 67 f2 0f 38 f8 8c 34 12     enqcmd 0x1234(%si),%cx
  Decoded ok: f3 0f 38 f8 18              enqcmds (%eax),%ebx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%eax),%ecx
  Decoded ok: 67 f3 0f 38 f8 1c           enqcmds (%si),%bx
  Decoded ok: 67 f3 0f 38 f8 8c 34 12     enqcmds 0x1234(%si),%cx
  Decoded ok: f2 0f 38 f8 18              enqcmd (%rax),%rbx
  Decoded ok: f2 0f 38 f8 88 78 56 34 12  enqcmd 0x12345678(%rax),%rcx
  Decoded ok: 67 f2 0f 38 f8 18           enqcmd (%eax),%ebx
  Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12       enqcmd 0x12345678(%eax),%ecx
  Decoded ok: f3 0f 38 f8 18              enqcmds (%rax),%rbx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%rax),%rcx
  Decoded ok: 67 f3 0f 38 f8 18           enqcmds (%eax),%ebx
  Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12       enqcmds 0x12345678(%eax),%ecx
  $ perf test -v "new " 2>&1 | grep -i enqcmds
  Decoded ok: f3 0f 38 f8 18              enqcmds (%eax),%ebx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%eax),%ecx
  Decoded ok: 67 f3 0f 38 f8 1c           enqcmds (%si),%bx
  Decoded ok: 67 f3 0f 38 f8 8c 34 12     enqcmds 0x1234(%si),%cx
  Decoded ok: f3 0f 38 f8 18              enqcmds (%rax),%rbx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%rax),%rcx
  Decoded ok: 67 f3 0f 38 f8 18           enqcmds (%eax),%ebx
  Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12       enqcmds 0x12345678(%eax),%ecx
  $ perf test -v "new " 2>&1 | grep -i encls
  Decoded ok: 0f 01 cf                    encls
  Decoded ok: 0f 01 cf                    encls
  $ perf test -v "new " 2>&1 | grep -i enclu
  Decoded ok: 0f 01 d7                    enclu
  Decoded ok: 0f 01 d7                    enclu
  $ perf test -v "new " 2>&1 | grep -i enclv
Quoted 9 lines
  Decoded ok: 0f 01 c0                    enclv
  Decoded ok: 0f 01 c0                    enclv
  $ perf test -v "new " 2>&1 | grep -i pconfig
  Decoded ok: 0f 01 c5                    pconfig
  Decoded ok: 0f 01 c5                    pconfig
  $ perf test -v "new " 2>&1 | grep -i wbnoinvd
  Decoded ok: f3 0f 09                    wbnoinvd
  Decoded ok: f3 0f 09                    wbnoinvd

Thanks for updating it!
This looks good to me.

Quoted 138 lines
---
 arch/x86/lib/x86-opcode-map.txt       | 18 ++++++++++++------
 tools/arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------
 2 files changed, 24 insertions(+), 12 deletions(-)
arch/x86/lib/x86-opcode-map.txt +12 -6
index e0b85930dd77..0a0e9112f284 100644
@@ -333,7 +333,7 @@ AVXcode: 1
 06: CLTS
 07: SYSRET (o64)
 08: INVD
-09: WBINVD
+09: WBINVD | WBNOINVD (F3)
 0a:
 0b: UD2 (1B)
 0c:
@@ -364,7 +364,7 @@ AVXcode: 1
 # a ModR/M byte.
 1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev
 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
-1c:
+1c: Grp20 (1A),(1C)
 1d:
 1e:
 1f: NOP Ev
@@ -792,6 +792,8 @@ f3: Grp17 (1A)
 f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
 f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
 f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
+f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3)
+f9: MOVDIRI My,Gy
 EndTable
 
 Table: 3-byte opcode 2 (0x0f 0x3a)
@@ -943,9 +945,9 @@ GrpTable: Grp6
 EndTable
 
 GrpTable: Grp7
-0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
-1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
+0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
 3: LIDT Ms
 4: SMSW Mw/Rv
 5: rdpkru (110),(11B) | wrpkru (111),(11B)
@@ -1020,7 +1022,7 @@ GrpTable: Grp15
 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
 4: XSAVE | ptwrite Ey (F3),(11B)
 5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B)
 7: clflush | clflushopt (66) | sfence (11B)
 EndTable
 
@@ -1051,6 +1053,10 @@ GrpTable: Grp19
 6: vscatterpf1qps/d Wx (66),(ev)
 EndTable
 
+GrpTable: Grp20
+0: cldemote Mb
+EndTable
+
 # AMD's Prefetch Group
 GrpTable: GrpP
 0: PREFETCH
tools/arch/x86/lib/x86-opcode-map.txt +12 -6
index e0b85930dd77..0a0e9112f284 100644
@@ -333,7 +333,7 @@ AVXcode: 1
 06: CLTS
 07: SYSRET (o64)
 08: INVD
-09: WBINVD
+09: WBINVD | WBNOINVD (F3)
 0a:
 0b: UD2 (1B)
 0c:
@@ -364,7 +364,7 @@ AVXcode: 1
 # a ModR/M byte.
 1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev
 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
-1c:
+1c: Grp20 (1A),(1C)
 1d:
 1e:
 1f: NOP Ev
@@ -792,6 +792,8 @@ f3: Grp17 (1A)
 f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
 f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
 f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
+f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3)
+f9: MOVDIRI My,Gy
 EndTable
 
 Table: 3-byte opcode 2 (0x0f 0x3a)
@@ -943,9 +945,9 @@ GrpTable: Grp6
 EndTable
 
 GrpTable: Grp7
-0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
-1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
+0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
 3: LIDT Ms
 4: SMSW Mw/Rv
 5: rdpkru (110),(11B) | wrpkru (111),(11B)
@@ -1020,7 +1022,7 @@ GrpTable: Grp15
 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
 4: XSAVE | ptwrite Ey (F3),(11B)
 5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B)
 7: clflush | clflushopt (66) | sfence (11B)
 EndTable
 
@@ -1051,6 +1053,10 @@ GrpTable: Grp19
 6: vscatterpf1qps/d Wx (66),(ev)
 EndTable
 
+GrpTable: Grp20
+0: cldemote Mb
+EndTable
+
 # AMD's Prefetch Group
 GrpTable: GrpP
 0: PREFETCH
Signature · 1 line
2.17.1
Signature · 1 line
Masami Hiramatsu <[email protected]>
merge bot Applied
#2 lore raw

[tip: perf/core] x86/insn: perf tools: Add some instructions to the new instructions test

In reply to Adrian Hunter
The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     1e5f015442e7b700941f8cd0274bb14962b3d78e
Gitweb:        https://git.kernel.org/tip/1e5f015442e7b700941f8cd0274bb14962b3d78e
Author:        Adrian Hunter <[email protected]>
AuthorDate:    Fri, 15 Nov 2019 15:54:46 +02:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Mon, 18 Nov 2019 18:53:54 -03:00

x86/insn: perf tools: Add some instructions to the new instructions test

Add to the "x86 instruction decoder - new instructions" test the following instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd

For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037).

---
 tools/perf/arch/x86/tests/insn-x86-dat-32.c  |  52 +++++++++-
 tools/perf/arch/x86/tests/insn-x86-dat-64.c  |  62 ++++++++++-
 tools/perf/arch/x86/tests/insn-x86-dat-src.c | 109 ++++++++++++++++++-
 3 files changed, 223 insertions(+)
tools/perf/arch/x86/tests/insn-x86-dat-32.c +52 -0
index fab3c6d..58f8f2a 100644
@@ -1647,6 +1647,12 @@
 "0f ae 30             \txsaveopt (%eax)",},
 {{0x0f, 0xae, 0xf0, }, 3, 0, "", "",
 "0f ae f0             \tmfence ",},
+{{0x0f, 0x1c, 0x00, }, 3, 0, "", "",
+"0f 1c 00             \tcldemote (%eax)",},
+{{0x0f, 0x1c, 0x05, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "",
+"0f 1c 05 78 56 34 12 \tcldemote 0x12345678",},
+{{0x0f, 0x1c, 0x84, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f 1c 84 c8 78 56 34 12 \tcldemote 0x12345678(%eax,%ecx,8)",},
 {{0x0f, 0xc7, 0x20, }, 3, 0, "", "",
 "0f c7 20             \txsavec (%eax)",},
 {{0x0f, 0xc7, 0x25, 0x78, 0x56, 0x34, 0x12, }, 7, 0, "", "",
@@ -1677,3 +1683,49 @@
 "f3 0f ae 25 78 56 34 12 \tptwritel 0x12345678",},
 {{0xf3, 0x0f, 0xae, 0xa4, 0xc8, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
 "f3 0f ae a4 c8 78 56 34 12 \tptwritel 0x12345678(%eax,%ecx,8)",},
+{{0x66, 0x0f, 0xae, 0xf3, }, 4, 0, "", "",
+"66 0f ae f3          \ttpause %ebx",},
+{{0x67, 0xf3, 0x0f, 0xae, 0xf0, }, 5, 0, "", "",
+"67 f3 0f ae f0       \tumonitor %ax",},
+{{0xf3, 0x0f, 0xae, 0xf0, }, 4, 0, "", "",
+"f3 0f ae f0          \tumonitor %eax",},
+{{0xf2, 0x0f, 0xae, 0xf0, }, 4, 0, "", "",
+"f2 0f ae f0          \tumwait %eax",},
+{{0x0f, 0x38, 0xf9, 0x03, }, 4, 0, "", "",
+"0f 38 f9 03          \tmovdiri %eax,(%ebx)",},
+{{0x0f, 0x38, 0xf9, 0x88, 0x78, 0x56, 0x34, 0x12, }, 8, 0, "", "",
+"0f 38 f9 88 78 56 34 12 \tmovdiri %ecx,0x12345678(%eax)",},
+{{0x66, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"66 0f 38 f8 18       \tmovdir64b (%eax),%ebx",},
+{{0x66, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"66 0f 38 f8 88 78 56 34 12 \tmovdir64b 0x12345678(%eax),%ecx",},
+{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "",
+"67 66 0f 38 f8 1c    \tmovdir64b (%si),%bx",},
+{{0x67, 0x66, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "",
+"67 66 0f 38 f8 8c 34 12 \tmovdir64b 0x1234(%si),%cx",},
+{{0xf2, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"f2 0f 38 f8 18       \tenqcmd (%eax),%ebx",},
+{{0xf2, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"f2 0f 38 f8 88 78 56 34 12 \tenqcmd 0x12345678(%eax),%ecx",},
+{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "",
+"67 f2 0f 38 f8 1c    \tenqcmd (%si),%bx",},
+{{0x67, 0xf2, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "",
+"67 f2 0f 38 f8 8c 34 12 \tenqcmd 0x1234(%si),%cx",},
+{{0xf3, 0x0f, 0x38, 0xf8, 0x18, }, 5, 0, "", "",
+"f3 0f 38 f8 18       \tenqcmds (%eax),%ebx",},
+{{0xf3, 0x0f, 0x38, 0xf8, 0x88, 0x78, 0x56, 0x34, 0x12, }, 9, 0, "", "",
+"f3 0f 38 f8 88 78 56 34 12 \tenqcmds 0x12345678(%eax),%ecx",},
+{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x1c, }, 6, 0, "", "",
+"67 f3 0f 38 f8 1c    \tenqcmds (%si),%bx",},
+{{0x67, 0xf3, 0x0f, 0x38, 0xf8, 0x8c, 0x34, 0x12, }, 8, 0, "", "",
+"67 f3 0f 38 f8 8c 34 12 \tenqcmds 0x1234(%si),%cx",},
+{{0x0f, 0x01, 0xcf, }, 3, 0, "", "",
+"0f 01 cf             \tencls  ",},
+{{0x0f, 0x01, 0xd7, }, 3, 0, "", "",
+"0f 01 d7             \tenclu  ",},
+{{0x0f, 0x01, 0xc0, }, 3, 0, "", "",
+"0f 01 c0             \tenclv  ",},
+{{0x0f, 0x01, 0xc5, }, 3, 0, "", "",
+"0f 01 c5             \tpconfig ",},
+{{0xf3, 0x0f, 0x09, }, 3, 0, "", "",
+"f3 0f 09             \twbnoinvd ",},
tools/perf/arch/x86/tests/insn-x86-dat-64.c +62 -0

71 lines not on this page · raw message

tools/perf/arch/x86/tests/insn-x86-dat-src.c +109 -0

135 lines not on this page · raw message

merge bot Applied
#6 lore raw
In reply to Adrian Hunter
The following commit has been merged into the perf/core branch of tip:

The following commit has been merged into the perf/core branch of tip:

Commit-ID:     b980be189c9badba50634671e2303e92bf28e35a
Gitweb:        https://git.kernel.org/tip/b980be189c9badba50634671e2303e92bf28e35a
Author:        Adrian Hunter <[email protected]>
AuthorDate:    Fri, 15 Nov 2019 15:54:47 +02:00
Committer:     Arnaldo Carvalho de Melo <[email protected]>
CommitterDate: Mon, 18 Nov 2019 18:54:45 -03:00

x86/insn: Add some Intel instructions to the opcode map

Add to the opcode map the following instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd

For information about the instructions, refer Intel SDM May 2019 (325462-070US) and Intel Architecture Instruction Set Extensions May 2019 (319433-037).

The instruction decoding can be tested using the perf tools' "x86 instruction decoder - new instructions" test as folllows:

  $ perf test -v "new " 2>&1 | grep -i cldemote
  Decoded ok: 0f 1c 00                    cldemote (%eax)
  Decoded ok: 0f 1c 05 78 56 34 12        cldemote 0x12345678
  Decoded ok: 0f 1c 84 c8 78 56 34 12     cldemote 0x12345678(%eax,%ecx,8)
  Decoded ok: 0f 1c 00                    cldemote (%rax)
  Decoded ok: 41 0f 1c 00                 cldemote (%r8)
  Decoded ok: 0f 1c 04 25 78 56 34 12     cldemote 0x12345678
  Decoded ok: 0f 1c 84 c8 78 56 34 12     cldemote 0x12345678(%rax,%rcx,8)
  Decoded ok: 41 0f 1c 84 c8 78 56 34 12  cldemote 0x12345678(%r8,%rcx,8)
  $ perf test -v "new " 2>&1 | grep -i tpause
  Decoded ok: 66 0f ae f3                 tpause %ebx
  Decoded ok: 66 0f ae f3                 tpause %ebx
  Decoded ok: 66 41 0f ae f0              tpause %r8d
  $ perf test -v "new " 2>&1 | grep -i umonitor
  Decoded ok: 67 f3 0f ae f0              umonitor %ax
  Decoded ok: f3 0f ae f0                 umonitor %eax
  Decoded ok: 67 f3 0f ae f0              umonitor %eax
  Decoded ok: f3 0f ae f0                 umonitor %rax
  Decoded ok: 67 f3 41 0f ae f0           umonitor %r8d
  $ perf test -v "new " 2>&1 | grep -i umwait
  Decoded ok: f2 0f ae f0                 umwait %eax
  Decoded ok: f2 0f ae f0                 umwait %eax
  Decoded ok: f2 41 0f ae f0              umwait %r8d
  $ perf test -v "new " 2>&1 | grep -i movdiri
  Decoded ok: 0f 38 f9 03                 movdiri %eax,(%ebx)
  Decoded ok: 0f 38 f9 88 78 56 34 12     movdiri %ecx,0x12345678(%eax)
  Decoded ok: 48 0f 38 f9 03              movdiri %rax,(%rbx)
  Decoded ok: 48 0f 38 f9 88 78 56 34 12  movdiri %rcx,0x12345678(%rax)
  $ perf test -v "new " 2>&1 | grep -i movdir64b
  Decoded ok: 66 0f 38 f8 18              movdir64b (%eax),%ebx
  Decoded ok: 66 0f 38 f8 88 78 56 34 12  movdir64b 0x12345678(%eax),%ecx
  Decoded ok: 67 66 0f 38 f8 1c           movdir64b (%si),%bx
  Decoded ok: 67 66 0f 38 f8 8c 34 12     movdir64b 0x1234(%si),%cx
  Decoded ok: 66 0f 38 f8 18              movdir64b (%rax),%rbx
  Decoded ok: 66 0f 38 f8 88 78 56 34 12  movdir64b 0x12345678(%rax),%rcx
  Decoded ok: 67 66 0f 38 f8 18           movdir64b (%eax),%ebx
  Decoded ok: 67 66 0f 38 f8 88 78 56 34 12       movdir64b 0x12345678(%eax),%ecx
  $ perf test -v "new " 2>&1 | grep -i enqcmd
  Decoded ok: f2 0f 38 f8 18              enqcmd (%eax),%ebx
  Decoded ok: f2 0f 38 f8 88 78 56 34 12  enqcmd 0x12345678(%eax),%ecx
  Decoded ok: 67 f2 0f 38 f8 1c           enqcmd (%si),%bx
  Decoded ok: 67 f2 0f 38 f8 8c 34 12     enqcmd 0x1234(%si),%cx
  Decoded ok: f3 0f 38 f8 18              enqcmds (%eax),%ebx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%eax),%ecx
  Decoded ok: 67 f3 0f 38 f8 1c           enqcmds (%si),%bx
  Decoded ok: 67 f3 0f 38 f8 8c 34 12     enqcmds 0x1234(%si),%cx
  Decoded ok: f2 0f 38 f8 18              enqcmd (%rax),%rbx
  Decoded ok: f2 0f 38 f8 88 78 56 34 12  enqcmd 0x12345678(%rax),%rcx
  Decoded ok: 67 f2 0f 38 f8 18           enqcmd (%eax),%ebx
  Decoded ok: 67 f2 0f 38 f8 88 78 56 34 12       enqcmd 0x12345678(%eax),%ecx
  Decoded ok: f3 0f 38 f8 18              enqcmds (%rax),%rbx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%rax),%rcx
  Decoded ok: 67 f3 0f 38 f8 18           enqcmds (%eax),%ebx
  Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12       enqcmds 0x12345678(%eax),%ecx
  $ perf test -v "new " 2>&1 | grep -i enqcmds
  Decoded ok: f3 0f 38 f8 18              enqcmds (%eax),%ebx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%eax),%ecx
  Decoded ok: 67 f3 0f 38 f8 1c           enqcmds (%si),%bx
  Decoded ok: 67 f3 0f 38 f8 8c 34 12     enqcmds 0x1234(%si),%cx
  Decoded ok: f3 0f 38 f8 18              enqcmds (%rax),%rbx
  Decoded ok: f3 0f 38 f8 88 78 56 34 12  enqcmds 0x12345678(%rax),%rcx
  Decoded ok: 67 f3 0f 38 f8 18           enqcmds (%eax),%ebx
  Decoded ok: 67 f3 0f 38 f8 88 78 56 34 12       enqcmds 0x12345678(%eax),%ecx
  $ perf test -v "new " 2>&1 | grep -i encls
  Decoded ok: 0f 01 cf                    encls
  Decoded ok: 0f 01 cf                    encls
  $ perf test -v "new " 2>&1 | grep -i enclu
  Decoded ok: 0f 01 d7                    enclu
  Decoded ok: 0f 01 d7                    enclu
  $ perf test -v "new " 2>&1 | grep -i enclv
  Decoded ok: 0f 01 c0                    enclv
  Decoded ok: 0f 01 c0                    enclv
  $ perf test -v "new " 2>&1 | grep -i pconfig
  Decoded ok: 0f 01 c5                    pconfig
  Decoded ok: 0f 01 c5                    pconfig
  $ perf test -v "new " 2>&1 | grep -i wbnoinvd
  Decoded ok: f3 0f 09                    wbnoinvd
  Decoded ok: f3 0f 09                    wbnoinvd
---
 arch/x86/lib/x86-opcode-map.txt       | 18 ++++++++++++------
 tools/arch/x86/lib/x86-opcode-map.txt | 18 ++++++++++++------
 2 files changed, 24 insertions(+), 12 deletions(-)
arch/x86/lib/x86-opcode-map.txt +12 -6
index e0b8593..0a0e911 100644
@@ -333,7 +333,7 @@ AVXcode: 1
 06: CLTS
 07: SYSRET (o64)
 08: INVD
-09: WBINVD
+09: WBINVD | WBNOINVD (F3)
 0a:
 0b: UD2 (1B)
 0c:
@@ -364,7 +364,7 @@ AVXcode: 1
 # a ModR/M byte.
 1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev
 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
-1c:
+1c: Grp20 (1A),(1C)
 1d:
 1e:
 1f: NOP Ev
@@ -792,6 +792,8 @@ f3: Grp17 (1A)
 f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
 f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
 f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
+f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3)
+f9: MOVDIRI My,Gy
 EndTable
 
 Table: 3-byte opcode 2 (0x0f 0x3a)
@@ -943,9 +945,9 @@ GrpTable: Grp6
 EndTable
 
 GrpTable: Grp7
-0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
-1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
+0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
 3: LIDT Ms
 4: SMSW Mw/Rv
 5: rdpkru (110),(11B) | wrpkru (111),(11B)
@@ -1020,7 +1022,7 @@ GrpTable: Grp15
 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
 4: XSAVE | ptwrite Ey (F3),(11B)
 5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B)
 7: clflush | clflushopt (66) | sfence (11B)
 EndTable
 
@@ -1051,6 +1053,10 @@ GrpTable: Grp19
 6: vscatterpf1qps/d Wx (66),(ev)
 EndTable
 
+GrpTable: Grp20
+0: cldemote Mb
+EndTable
+
 # AMD's Prefetch Group
 GrpTable: GrpP
 0: PREFETCH
tools/arch/x86/lib/x86-opcode-map.txt +12 -6
index e0b8593..0a0e911 100644
@@ -333,7 +333,7 @@ AVXcode: 1
 06: CLTS
 07: SYSRET (o64)
 08: INVD
-09: WBINVD
+09: WBINVD | WBNOINVD (F3)
 0a:
 0b: UD2 (1B)
 0c:
@@ -364,7 +364,7 @@ AVXcode: 1
 # a ModR/M byte.
 1a: BNDCL Gv,Ev (F3) | BNDCU Gv,Ev (F2) | BNDMOV Gv,Ev (66) | BNDLDX Gv,Ev
 1b: BNDCN Gv,Ev (F2) | BNDMOV Ev,Gv (66) | BNDMK Gv,Ev (F3) | BNDSTX Ev,Gv
-1c:
+1c: Grp20 (1A),(1C)
 1d:
 1e:
 1f: NOP Ev
@@ -792,6 +792,8 @@ f3: Grp17 (1A)
 f5: BZHI Gy,Ey,By (v) | PEXT Gy,By,Ey (F3),(v) | PDEP Gy,By,Ey (F2),(v)
 f6: ADCX Gy,Ey (66) | ADOX Gy,Ey (F3) | MULX By,Gy,rDX,Ey (F2),(v)
 f7: BEXTR Gy,Ey,By (v) | SHLX Gy,Ey,By (66),(v) | SARX Gy,Ey,By (F3),(v) | SHRX Gy,Ey,By (F2),(v)
+f8: MOVDIR64B Gv,Mdqq (66) | ENQCMD Gv,Mdqq (F2) | ENQCMDS Gv,Mdqq (F3)
+f9: MOVDIRI My,Gy
 EndTable
 
 Table: 3-byte opcode 2 (0x0f 0x3a)
@@ -943,9 +945,9 @@ GrpTable: Grp6
 EndTable
 
 GrpTable: Grp7
-0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B)
-1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B)
-2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B)
+0: SGDT Ms | VMCALL (001),(11B) | VMLAUNCH (010),(11B) | VMRESUME (011),(11B) | VMXOFF (100),(11B) | PCONFIG (101),(11B) | ENCLV (000),(11B)
+1: SIDT Ms | MONITOR (000),(11B) | MWAIT (001),(11B) | CLAC (010),(11B) | STAC (011),(11B) | ENCLS (111),(11B)
+2: LGDT Ms | XGETBV (000),(11B) | XSETBV (001),(11B) | VMFUNC (100),(11B) | XEND (101)(11B) | XTEST (110)(11B) | ENCLU (111),(11B)
 3: LIDT Ms
 4: SMSW Mw/Rv
 5: rdpkru (110),(11B) | wrpkru (111),(11B)
@@ -1020,7 +1022,7 @@ GrpTable: Grp15
 3: vstmxcsr Md (v1) | WRGSBASE Ry (F3),(11B)
 4: XSAVE | ptwrite Ey (F3),(11B)
 5: XRSTOR | lfence (11B)
-6: XSAVEOPT | clwb (66) | mfence (11B)
+6: XSAVEOPT | clwb (66) | mfence (11B) | TPAUSE Rd (66),(11B) | UMONITOR Rv (F3),(11B) | UMWAIT Rd (F2),(11B)
 7: clflush | clflushopt (66) | sfence (11B)
 EndTable
 
@@ -1051,6 +1053,10 @@ GrpTable: Grp19
 6: vscatterpf1qps/d Wx (66),(ev)
 EndTable
 
+GrpTable: Grp20
+0: cldemote Mb
+EndTable
+
 # AMD's Prefetch Group
 GrpTable: GrpP
 0: PREFETCH