ASoC: wm2200: add missed operations in remove and probe failure
Subsystems (3)
PATCH 1/1 ASoC: wm2200: add missed operations in remove and probe failure
This driver misses calls to pm_runtime_disable and regulator_bulk_disable in remove and a call to free_irq in probe failure.
Add the calls to fix it.
--- sound/soc/codecs/wm2200.c | 5 +++++ 1 file changed, 5 insertions(+)
sound/soc/codecs/wm2200.c +5 -0
@@ -2410,6 +2410,8 @@ static int wm2200_i2c_probe(struct i2c_client *i2c, err_pm_runtime:pm_runtime_disable (&i2c->dev); +if (i2c->irq) +free_irq (i2c->irq, wm2200); err_reset:if (wm2200->pdata.reset)gpio_set_value_cansleep (wm2200->pdata.reset,0 );
@@ -2426,12 +2428,15 @@ static int wm2200_i2c_remove(struct i2c_client *i2c) {struct wm2200_priv *wm2200 =i2c_get_clientdata (i2c); +pm_runtime_disable (&i2c->dev);if (i2c->irq)free_irq (i2c->irq, wm2200);if (wm2200->pdata.reset)gpio_set_value_cansleep (wm2200->pdata.reset,0 );if (wm2200->pdata.ldo_ena)gpio_set_value_cansleep (wm2200->pdata.ldo_ena,0 ); +regulator_bulk_disable (ARRAY_SIZE (wm2200->core_supplies), + wm2200->core_supplies);return 0 ; }
Signature · 1 line
2.24.0
Quoted 14 lines · Chuhong Yuan
This driver misses calls to
pm_runtime_disableandregulator_bulk_disablein remove and a call tofree_irqin probe failure.
Add the calls to fix it.Signed-off-by Chuhong Yuan <[email protected]>--- sound/soc/codecs/wm2200.c | 5 +++++ 1 file changed, 5 insertions(+)sound/soc/codecs/wm2200.c +0
-0
sound/soc/codecs/wm2200.c static int wm2200_i2c_probe(struct i2c_client *i2c, · line 2414
Quoted 5 lines
sound/soc/codecs/wm2200.c +2
-0@@ -2410,6 +2410,8 @@ static int wm2200_i2c_probe(struct i2c_client *i2c, err_pm_runtime:pm_runtime_disable (&i2c->dev); +if (i2c->irq) +free_irq (i2c->irq, wm2200);
Might be worth also adding a return if the request of the IRQ fails. We will get a large WARN in the log if the IRQ request failed, then we fall down this error path.
Quoted 6 lines
sound/soc/codecs/wm2200.c +0
-0err_reset:if (wm2200->pdata.reset)gpio_set_value_cansleep (wm2200->pdata.reset,0 );@@ -2426,12 +2428,15 @@ static int wm2200_i2c_remove(struct i2c_client *i2c) {struct wm2200_priv *wm2200 =i2c_get_clientdata (i2c);
sound/soc/codecs/wm2200.c static int wm2200_i2c_remove(struct i2c_client *i2c) · line 2439
Quoted 10 lines
sound/soc/codecs/wm2200.c +3
-0+pm_runtime_disable (&i2c->dev);if (i2c->irq)free_irq (i2c->irq, wm2200);if (wm2200->pdata.reset)gpio_set_value_cansleep (wm2200->pdata.reset,0 );if (wm2200->pdata.ldo_ena)gpio_set_value_cansleep (wm2200->pdata.ldo_ena,0 ); +regulator_bulk_disable (ARRAY_SIZE (wm2200->core_supplies), + wm2200->core_supplies);
This one is a bit trickier since this regulator is being controlled by PM runtime, and I don't think it necessarily leaves things in an enabled state when it is disabled.
Thanks,
Charles
_______________________________________________
Alsa-devel mailing list
[email protected]
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Mark Brown
maintainer[alsa-devel] Applied "ASoC: wm2200: add missed operations in remove and probe failure" to the asoc tree
In reply to Chuhong YuanThe patch
ASoC: wm2200: add missed operations in remove and probe failure
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 51af759a930c18d2ee450772e01c614564772b2a Mon Sep 17 00:00:00 2001
From: Chuhong Yuan <[email protected]>
Date: Mon, 18 Nov 2019 15:36:33 +0800
Subject: [PATCH] ASoC: wm2200: add missed operations in remove and probe
failure
This driver misses calls to pm_runtime_disable and regulator_bulk_disable in remove and a call to free_irq in probe failure.
Add the calls to fix it.
--- sound/soc/codecs/wm2200.c | 5 +++++ 1 file changed, 5 insertions(+)
sound/soc/codecs/wm2200.c +5 -0
@@ -2410,6 +2410,8 @@ static int wm2200_i2c_probe(struct i2c_client *i2c, err_pm_runtime:pm_runtime_disable (&i2c->dev); +if (i2c->irq) +free_irq (i2c->irq, wm2200); err_reset:if (wm2200->pdata.reset)gpio_set_value_cansleep (wm2200->pdata.reset,0 );
@@ -2426,12 +2428,15 @@ static int wm2200_i2c_remove(struct i2c_client *i2c) {struct wm2200_priv *wm2200 =i2c_get_clientdata (i2c); +pm_runtime_disable (&i2c->dev);if (i2c->irq)free_irq (i2c->irq, wm2200);if (wm2200->pdata.reset)gpio_set_value_cansleep (wm2200->pdata.reset,0 );if (wm2200->pdata.ldo_ena)gpio_set_value_cansleep (wm2200->pdata.ldo_ena,0 ); +regulator_bulk_disable (ARRAY_SIZE (wm2200->core_supplies), + wm2200->core_supplies);return 0 ; }
Signature · 6 lines
2.20.1 _______________________________________________ Alsa-devel mailing list [email protected] https://mailman.alsa-project.org/mailman/listinfo/alsa-devel