Skip to contentSkip to conversation

Add TFA secure boot defconfig and Enables secure boot related configs in it.

PATCH New Udit Agarwal 2 participants 2 messages Nov 20, 2019

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 Add TFA secure boot defconfig and Enables secure boot related configs in it.

---
Changes in V3:
Corrects commit message and resends patch.

 configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig | 57 +++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig
configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig new file +57 -0
new file mode 100644
index 0000000000..aa293302f5
@@ -0,0 +1,57 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046AFRWY=y
+CONFIG_TFABOOT=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SECURE_BOOT=y
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
+CONFIG_MISC_INIT_R=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_MP=y
+CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi:1m(rcw),15m(u-boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),448m(nand_free)"
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-frwy"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_DM=y
+CONFIG_SATA_CEVA=y
+CONFIG_FSL_CAAM=y
+CONFIG_DM_MMC=y
+CONFIG_FSL_ESDHC=y
+CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_BAR is not set
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_PHYLIB=y
+CONFIG_PHY_VITESSE=y
+CONFIG_PHY_GIGE=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_SCSI=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_RSA=y
+CONFIG_CMD_SETEXPR=y
Signature · 1 line
2.17.1
#1 lore raw

PATCH v3 1/1 Add TFA secure boot defconfig and Enables secure boot related configs in it.

Quoted 11 lines

-----Original Message-----
From: Udit Agarwal <[email protected]>
Sent: Wednesday, November 20, 2019 11:46 AM
To: u-boot at lists.denx.de
Cc: Priyanka Jain <[email protected]>; Arun Pathak <[email protected]>; Ruchika Gupta <[email protected]>; Udit Agarwal <[email protected]>
Subject: [PATCH v3] Add TFA secure boot defconfig and Enables secure boot related configs in it.

Trim subject to fit in 60 characters.
Current information is vague
Mention which config is being added in subject/description.

Quoted 63 lines

---
Changes in V3:
Corrects commit message and resends patch.

configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig | 57 +++++++++++++++++++

1 file changed, 57 insertions(+)

create mode 100644 configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig

configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig new file +15 -0
new file mode 100644
index 0000000000..aa293302f5
@@ -0,0 +1,57 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1046AFRWY=y
+CONFIG_TFABOOT=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_SECURE_BOOT=y
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0

earlycon=uart8250,mmio,0x21c0500 mtdparts=1550000.spi:1m(rcw),15m(u- boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),44 8m(nand_free)"

configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig new file +11 -0
+CONFIG_MISC_INIT_R=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_MP=y
+CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi:1m(rcw),15m(u-

boot),48m(kernel.itb);7e800000.flash:16m(nand_uboot),48m(nand_kernel),44 8m(nand_free)"

configs/ls1046afrwy_tfa_SECURE_BOOT_defconfig new file +13 -0
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-frwy"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_DM=y
+CONFIG_SATA_CEVA=y
+CONFIG_FSL_CAAM=y
+CONFIG_DM_MMC=y
+CONFIG_FSL_ESDHC=y
+CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_BAR is not set
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set CONFIG_PHYLIB=y
+CONFIG_PHY_VITESSE=y CONFIG_PHY_GIGE=y CONFIG_E1000=y

CONFIG_PCI=y
+CONFIG_DM_PCI=y CONFIG_DM_PCI_COMPAT=y

Quoted 8 lines

CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_DM_SCSI=y CONFIG_SYS_NS16550=y CONFIG_SPI=y CONFIG_DM_SPI=y
+CONFIG_FSL_QSPI=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y CONFIG_RSA=y CONFIG_CMD_SETEXPR=y --
2.17.1

-priyankajain