Skip to contentSkip to conversation

spi: Fix Kconfig indentation

PATCH In review Krzysztof Kozlowski 2 participants 2 messages Nov 20, 2019 SPI

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 spi: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like:

	$ sed -e 's/^        /\t/' -i */Kconfig
---
 drivers/spi/Kconfig | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/spi/Kconfig +9 -9
index 6c0c1f55bd71..870f7797b56b 100644
@@ -144,7 +144,7 @@ config SPI_BCM63XX
 	tristate "Broadcom BCM63xx SPI controller"
 	depends on BCM63XX || COMPILE_TEST
 	help
-          Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
+	  Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
 
 config SPI_BCM63XX_HSSPI
 	tristate "Broadcom BCM63XX HS SPI controller driver"
@@ -235,11 +235,11 @@ config SPI_DLN2
        tristate "Diolan DLN-2 USB SPI adapter"
        depends on MFD_DLN2
        help
-         If you say yes to this option, support will be included for Diolan
-         DLN2, a USB to SPI interface.
+	 If you say yes to this option, support will be included for Diolan
+	 DLN2, a USB to SPI interface.
 
-         This driver can also be built as a module.  If so, the module
-         will be called spi-dln2.
+	 This driver can also be built as a module.  If so, the module
+	 will be called spi-dln2.
 
 config SPI_EFM32
 	tristate "EFM32 SPI controller"
@@ -748,10 +748,10 @@ config SPI_SYNQUACER
 	  It also supports the new dual-bit and quad-bit SPI protocol.
 
 config SPI_MXIC
-        tristate "Macronix MX25F0A SPI controller"
-        depends on SPI_MASTER
-        help
-          This selects the Macronix MX25F0A SPI controller driver.
+	tristate "Macronix MX25F0A SPI controller"
+	depends on SPI_MASTER
+	help
+	  This selects the Macronix MX25F0A SPI controller driver.
 
 config SPI_MXS
 	tristate "Freescale MXS SPI controller"
Signature · 1 line
2.17.1
maintainer
#1 lore raw

Applied "spi: Fix Kconfig indentation" to the spi tree

The patch

spi: Fix Kconfig indentation

has been applied to the spi tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-5.5

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 554bbe726ce0ef692cd95fedd5730c69c1189138 Mon Sep 17 00:00:00 2001

From: Krzysztof Kozlowski <[email protected]>
Date: Wed, 20 Nov 2019 21:39:16 +0800
Subject: [PATCH] spi: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like:

	$ sed -e 's/^        /\t/' -i */Kconfig
---
 drivers/spi/Kconfig | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/spi/Kconfig +9 -9
index 6c0c1f55bd71..870f7797b56b 100644
@@ -144,7 +144,7 @@ config SPI_BCM63XX
 	tristate "Broadcom BCM63xx SPI controller"
 	depends on BCM63XX || COMPILE_TEST
 	help
-          Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
+	  Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
 
 config SPI_BCM63XX_HSSPI
 	tristate "Broadcom BCM63XX HS SPI controller driver"
@@ -235,11 +235,11 @@ config SPI_DLN2
        tristate "Diolan DLN-2 USB SPI adapter"
        depends on MFD_DLN2
        help
-         If you say yes to this option, support will be included for Diolan
-         DLN2, a USB to SPI interface.
+	 If you say yes to this option, support will be included for Diolan
+	 DLN2, a USB to SPI interface.
 
-         This driver can also be built as a module.  If so, the module
-         will be called spi-dln2.
+	 This driver can also be built as a module.  If so, the module
+	 will be called spi-dln2.
 
 config SPI_EFM32
 	tristate "EFM32 SPI controller"
@@ -748,10 +748,10 @@ config SPI_SYNQUACER
 	  It also supports the new dual-bit and quad-bit SPI protocol.
 
 config SPI_MXIC
-        tristate "Macronix MX25F0A SPI controller"
-        depends on SPI_MASTER
-        help
-          This selects the Macronix MX25F0A SPI controller driver.
+	tristate "Macronix MX25F0A SPI controller"
+	depends on SPI_MASTER
+	help
+	  This selects the Macronix MX25F0A SPI controller driver.
 
 config SPI_MXS
 	tristate "Freescale MXS SPI controller"
Signature · 1 line
2.20.1