bpf: provide better register bounds after jmp32 instructions
Subsystems (4)
cover bpf: provide better register bounds after jmp32 instructions
With latest llvm, bpf selftest test_progs, which has +alu32 enabled, failed for strobemeta.o and a few other subtests. The reason is due to that verifier did not provide better var_off.mask after jmp32 instructions. This patch set addressed this issue and after the fix, test_progs passed with alu32.
Patch #1 provided detailed explanation of the problem and the fix. Patch #2 added three tests in test_verifier.
Yonghong Song (2):
bpf: provide better register bounds after jmp32 instructions tools/bpf: add verifier tests for better jmp32 register bounds
kernel/bpf/verifier.c | 32 +++++++- tools/testing/selftests/bpf/verifier/jmp32.c | 83 ++++++++++++++++++++ 2 files changed, 111 insertions(+), 4 deletions(-)
Signature · 1 line
2.17.1
PATCH 1/2 bpf: provide better register bounds after jmp32 instructions
With latest llvm (trunk https://github.com/llvm/llvm-project),test_progs, which has +alu32 enabled, failed for strobemeta.o. The verifier output looks like below with edit to replace large decimal numbers with hex ones.
193: (85) call bpf_probe_read_user_str#114
R0=inv(id=0)
194: (26) if w0 > 0x1 goto pc+4
R0_w=inv(id=0,umax_value=0xffffffff00000001)
195: (6b) *(u16 *)(r7 +80) = r0
196: (bc) w6 = w0
R6_w=inv(id=0,umax_value=0xffffffff,var_off=(0x0; 0xffffffff))
197: (67) r6 <<= 32
R6_w=inv(id=0,smax_value=0x7fffffff00000000,umax_value=0xffffffff00000000,
var_off=(0x0; 0xffffffff00000000))
198: (77) r6 >>= 32
R6=inv(id=0,umax_value=0xffffffff,var_off=(0x0; 0xffffffff))
...
201: (79) r8 = *(u64 *)(r10 -416)
R8_w=map_value(id=0,off=40,ks=4,vs=13872,imm=0)
202: (0f) r8 += r6
R8_w=map_value(id=0,off=40,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0; 0xffffffff))
203: (07) r8 += 9696
R8_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0; 0xffffffff))
...
255: (bf) r1 = r8
R1_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0; 0xffffffff))
...
257: (85) call bpf_probe_read_user_str#114
R1 unbounded memory access, make sure to bounds check any array access into a map
The value range for register r6 at insn 198 should be really just 0/1. The umax_value=0xffffffff caused later verification failure.
After jmp instructions, the current verifier already tried to use just obtained information to get better register range. The current mechanism is for 64bit register only. This patch implemented to tighten the range for 32bit sub-registers after jmp32 instructions.
With the patch, we have the below range ranges for the
above code sequence:
193: (85) call bpf_probe_read_user_str#114
R0=inv(id=0)
194: (26) if w0 > 0x1 goto pc+4
R0_w=inv(id=0,smax_value=0x7fffffff00000001,umax_value=0xffffffff00000001,
var_off=(0x0; 0xffffffff00000001))
195: (6b) *(u16 *)(r7 +80) = r0
196: (bc) w6 = w0
R6_w=inv(id=0,umax_value=0xffffffff,var_off=(0x0; 0x1))
197: (67) r6 <<= 32
R6_w=inv(id=0,umax_value=0x100000000,var_off=(0x0; 0x100000000))
198: (77) r6 >>= 32
R6=inv(id=0,umax_value=1,var_off=(0x0; 0x1))
...
201: (79) r8 = *(u64 *)(r10 -416)
R8_w=map_value(id=0,off=40,ks=4,vs=13872,imm=0)
202: (0f) r8 += r6
R8_w=map_value(id=0,off=40,ks=4,vs=13872,umax_value=1,var_off=(0x0; 0x1))
203: (07) r8 += 9696
R8_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=1,var_off=(0x0; 0x1))
...
255: (bf) r1 = r8
R1_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=1,var_off=(0x0; 0x1))
...
257: (85) call bpf_probe_read_user_str#114
...
At insn 194, the register R0 has better var_off.mask and smax_value. Especially, the var_off.mask ensures later lshift and rshift maintains proper value range.
--- kernel/bpf/verifier.c | 32 ++++++++++++++++++++++++++++---- 1 file changed, 28 insertions(+), 4 deletions(-)
kernel/bpf/verifier.c +28 -4
@@ -1007,6 +1007,20 @@ static void __reg_bound_offset(struct bpf_reg_state *reg) reg->umax_value)); } +static void __reg_bound_offset32 (struct bpf_reg_state *reg) +{ +u64 mask =0xffffFFFF ; +struct tnum range =tnum_range (reg->umin_value & mask, + reg->umax_value & mask); +struct tnum lo32 =tnum_cast (reg->var_off,4 ); +struct tnum hi32 = reg->var_off; + + hi32.value &= ~mask; + hi32.mask &= ~mask; + + reg->var_off =tnum_or (hi32,tnum_intersect (lo32, range)); +} +/* Reset the min/max bounds of a register */ static void __mark_reg_unbounded (struct bpf_reg_state *reg) {
@@ -5587,8 +5601,13 @@ static void reg_set_min_max(struct bpf_reg_state *true_reg,__reg_deduce_bounds (false_reg);__reg_deduce_bounds (true_reg);/* We might have learned some bits from the bounds. */ -__reg_bound_offset (false_reg); -__reg_bound_offset (true_reg); +if (is_jmp32) { +__reg_bound_offset32 (false_reg); +__reg_bound_offset32 (true_reg); + }else { +__reg_bound_offset (false_reg); +__reg_bound_offset (true_reg); + }/* Intersecting with the old var_off might have improved our bounds * slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), * then new var_off is (0; 0x7f...fc) which improves our umax.
@@ -5696,8 +5715,13 @@ static void reg_set_min_max_inv(struct bpf_reg_state *true_reg,__reg_deduce_bounds (false_reg);__reg_deduce_bounds (true_reg);/* We might have learned some bits from the bounds. */ -__reg_bound_offset (false_reg); -__reg_bound_offset (true_reg); +if (is_jmp32) { +__reg_bound_offset32 (false_reg); +__reg_bound_offset32 (true_reg); + }else { +__reg_bound_offset (false_reg); +__reg_bound_offset (true_reg); + }/* Intersecting with the old var_off might have improved our bounds * slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), * then new var_off is (0; 0x7f...fc) which improves our umax.
Signature · 1 line
2.17.1
Quoted 83 lines · Yonghong Song
With latest llvm (trunk https://github.com/llvm/llvm-project),
test_progs, which has +alu32 enabled, failed for strobemeta.o. The verifier output looks like below with edit to replace large decimal numbers with hex ones.
193: (85) call bpf_probe_read_user_str#114
R0=inv(id=0)
194: (26) if w0 >0x1goto pc+4
R0_w=inv(id=0,umax_value=0xffffffff00000001)
195: (6b) *(u16 *)(r7 +80) = r0
196: (bc) w6 = w0
R6_w=inv(id=0,umax_value=0xffffffff,var_off=(0x0;0xffffffff))
197: (67) r6 <<= 32
R6_w=inv(id=0,smax_value=0x7fffffff00000000,umax_value=0xffffffff00000000,var_off=(0x0; 0xffffffff00000000))198: (77) r6 >>= 32
R6=inv(id=0,umax_value=0xffffffff,var_off=(0x0;0xffffffff))
...
201: (79) r8 = *(u64 *)(r10 -416)
R8_w=map_value(id=0,off=40,ks=4,vs=13872,imm=0)
202: (0f) r8 += r6
R8_w=map_value(id=0,off=40,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0;0xffffffff))
203: (07) r8 += 9696
R8_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0;0xffffffff))
...
255: (bf) r1 = r8
R1_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0;0xffffffff))
...
257: (85) call bpf_probe_read_user_str#114
R1 unbounded memory access, make sure to bounds check any array access into a mapThe value range for register r6 at insn 198 should be really just 0/1. The umax_value=0xffffffff caused later verification failure.
After jmp instructions, the current verifier already tried to use just obtained information to get better register range. The current mechanism is for 64bit register only. This patch implemented to tighten the range for 32bit sub-registers after jmp32 instructions.
With the patch, we have the below range ranges for the
above code sequence:
193: (85) call bpf_probe_read_user_str#114
R0=inv(id=0)
194: (26) if w0 >0x1goto pc+4
R0_w=inv(id=0,smax_value=0x7fffffff00000001,umax_value=0xffffffff00000001,var_off=(0x0; 0xffffffff00000001))195: (6b) *(u16 *)(r7 +80) = r0
196: (bc) w6 = w0
R6_w=inv(id=0,umax_value=0xffffffff,var_off=(0x0;0x1))
197: (67) r6 <<= 32
R6_w=inv(id=0,umax_value=0x100000000,var_off=(0x0;0x100000000))
198: (77) r6 >>= 32
R6=inv(id=0,umax_value=1,var_off=(0x0;0x1))
...
201: (79) r8 = *(u64 *)(r10 -416)
R8_w=map_value(id=0,off=40,ks=4,vs=13872,imm=0)
202: (0f) r8 += r6
R8_w=map_value(id=0,off=40,ks=4,vs=13872,umax_value=1,var_off=(0x0;0x1))
203: (07) r8 += 9696
R8_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=1,var_off=(0x0;0x1))
...
255: (bf) r1 = r8
R1_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=1,var_off=(0x0;0x1))
...
257: (85) call bpf_probe_read_user_str#114
...At insn 194, the register R0 has better var_off.mask and
smax_value. Especially, the var_off.mask ensures later lshift and rshift maintains proper value range.Suggested-by Alexei Starovoitov <[email protected]>Signed-off-by Yonghong Song <[email protected]>--- kernel/bpf/verifier.c | 32 ++++++++++++++++++++++++++++---- 1 file changed, 28 insertions(+), 4 deletions(-)kernel/bpf/verifier.c +0
-0@@ -1007,6 +1007,20 @@ static void __reg_bound_offset(struct bpf_reg_state *reg) reg->umax_value)); }
kernel/bpf/verifier.c static void __reg_bound_offset(struct bpf_reg_state *reg) · line 1019
Quoted 10 lines
kernel/bpf/verifier.c +10
-0+static void __reg_bound_offset32 (struct bpf_reg_state *reg) +{ +u64 mask =0xffffFFFF ; +struct tnum range =tnum_range (reg->umin_value & mask, + reg->umax_value & mask); +struct tnum lo32 =tnum_cast (reg->var_off,4 ); +struct tnum hi32 = reg->var_off; + + hi32.value &= ~mask; + hi32.mask &= ~mask;
sorry that was a quick hack :)
May be make sense to do it as a helper? similar to tnum_cast ? The idea was to apply tnum_range to lower 32-bits. May be tnum_intersect_with_mask(a, b, 4) ?
Or above two lines could be
hi32 = tnum_and(reg->var_off, tnum_bitwise_not(tnum_u32_max)); There is tnum_lshift/tnum_rshift. They could be used as well.
Ed,
how would you simplify __reg_bound_offset32 logic ?
Quoted 42 lines
kernel/bpf/verifier.c +18
-4+ + reg->var_off =tnum_or (hi32,tnum_intersect (lo32, range)); +} +/* Reset the min/max bounds of a register */ static void __mark_reg_unbounded (struct bpf_reg_state *reg) {@@ -5587,8 +5601,13 @@ static void reg_set_min_max(struct bpf_reg_state *true_reg,__reg_deduce_bounds (false_reg);__reg_deduce_bounds (true_reg);/* We might have learned some bits from the bounds. */ -__reg_bound_offset (false_reg); -__reg_bound_offset (true_reg); +if (is_jmp32) { +__reg_bound_offset32 (false_reg); +__reg_bound_offset32 (true_reg); + }else { +__reg_bound_offset (false_reg); +__reg_bound_offset (true_reg); + }/* Intersecting with the old var_off might have improved our bounds * slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), * then new var_off is (0; 0x7f...fc) which improves our umax. @@ -5696,8 +5715,13 @@ static void reg_set_min_max_inv(struct bpf_reg_state *true_reg,__reg_deduce_bounds (false_reg);__reg_deduce_bounds (true_reg);/* We might have learned some bits from the bounds. */ -__reg_bound_offset (false_reg); -__reg_bound_offset (true_reg); +if (is_jmp32) { +__reg_bound_offset32 (false_reg); +__reg_bound_offset32 (true_reg); + }else { +__reg_bound_offset (false_reg); +__reg_bound_offset (true_reg); + }/* Intersecting with the old var_off might have improved our bounds * slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), * then new var_off is (0; 0x7f...fc) which improves our umax. Signature · 1 line
2.17.1
Quoted 95 lines · Alexei Starovoitov
Quoted 83 lines · Yonghong Song
With latest llvm (trunk https://github.com/llvm/llvm-project),
test_progs, which has +alu32 enabled, failed for strobemeta.o. The verifier output looks like below with edit to replace large decimal numbers with hex ones.
193: (85) call bpf_probe_read_user_str#114R0=inv(id=0) 194: (26) if w0 > 0x1 goto pc+4 R0_w=inv(id=0,umax_value=0xffffffff00000001) 195: (6b) *(u16 *)(r7 +80) = r0 196: (bc) w6 = w0 R6_w=inv(id=0,umax_value=0xffffffff,var_off=(0x0; 0xffffffff)) 197: (67) r6 <<= 32 R6_w=inv(id=0,smax_value=0x7fffffff00000000,umax_value=0xffffffff00000000, var_off=(0x0; 0xffffffff00000000)) 198: (77) r6 >>= 32 R6=inv(id=0,umax_value=0xffffffff,var_off=(0x0; 0xffffffff)) ... 201: (79) r8 = *(u64 *)(r10 -416) R8_w=map_value(id=0,off=40,ks=4,vs=13872,imm=0) 202: (0f) r8 += r6 R8_w=map_value(id=0,off=40,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0; 0xffffffff)) 203: (07) r8 += 9696 R8_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0; 0xffffffff)) ... 255: (bf) r1 = r8 R1_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=0xffffffff,var_off=(0x0; 0xffffffff))...
257: (85) call bpf_probe_read_user_str#114
R1 unbounded memory access, make sure to bounds check any array access into a mapThe value range for register r6 at insn 198 should be really just 0/1. The umax_value=0xffffffff caused later verification failure.
After jmp instructions, the current verifier already tried to use just obtained information to get better register range. The current mechanism is for 64bit register only. This patch implemented to tighten the range for 32bit sub-registers after jmp32 instructions.
With the patch, we have the below range ranges for the
above code sequence:
193: (85) call bpf_probe_read_user_str#114R0=inv(id=0) 194: (26) if w0 > 0x1 goto pc+4 R0_w=inv(id=0,smax_value=0x7fffffff00000001,umax_value=0xffffffff00000001, var_off=(0x0; 0xffffffff00000001)) 195: (6b) *(u16 *)(r7 +80) = r0 196: (bc) w6 = w0 R6_w=inv(id=0,umax_value=0xffffffff,var_off=(0x0; 0x1)) 197: (67) r6 <<= 32 R6_w=inv(id=0,umax_value=0x100000000,var_off=(0x0; 0x100000000)) 198: (77) r6 >>= 32 R6=inv(id=0,umax_value=1,var_off=(0x0; 0x1)) ... 201: (79) r8 = *(u64 *)(r10 -416) R8_w=map_value(id=0,off=40,ks=4,vs=13872,imm=0) 202: (0f) r8 += r6 R8_w=map_value(id=0,off=40,ks=4,vs=13872,umax_value=1,var_off=(0x0; 0x1)) 203: (07) r8 += 9696 R8_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=1,var_off=(0x0; 0x1)) ... 255: (bf) r1 = r8 R1_w=map_value(id=0,off=9736,ks=4,vs=13872,umax_value=1,var_off=(0x0; 0x1))...
257: (85) call bpf_probe_read_user_str#114
...At insn 194, the register R0 has better var_off.mask and
smax_value. Especially, the var_off.mask ensures later lshift and rshift maintains proper value range.Suggested-by Alexei Starovoitov <[email protected]>Signed-off-by Yonghong Song <[email protected]>--- kernel/bpf/verifier.c | 32 ++++++++++++++++++++++++++++---- 1 file changed, 28 insertions(+), 4 deletions(-)kernel/bpf/verifier.c +0
-0@@ -1007,6 +1007,20 @@ static void __reg_bound_offset(struct bpf_reg_state *reg) reg->umax_value)); }kernel/bpf/verifier.c static void __reg_bound_offset(struct bpf_reg_state *reg) · line 1019
Quoted 10 lines
kernel/bpf/verifier.c +10
-0+static void __reg_bound_offset32 (struct bpf_reg_state *reg) +{ +u64 mask =0xffffFFFF ; +struct tnum range =tnum_range (reg->umin_value & mask, + reg->umax_value & mask); +struct tnum lo32 =tnum_cast (reg->var_off,4 ); +struct tnum hi32 = reg->var_off; + + hi32.value &= ~mask; + hi32.mask &= ~mask;
Quoted 7 lines
sorry that was a quick hack :)
May be make sense to do it as a helper? similar totnum_cast? The idea was to applytnum_rangeto lower 32-bits. May betnum_intersect_with_mask(a, b, 4)?
Or above two lines could be
hi32 =tnum_and(reg->var_off, tnum_bitwise_not(tnum_u32_max)); There is tnum_lshift/tnum_rshift. They could be used as well.
I will use tnum_lshift/tnum_rshift which seems easy to understand. Will send v2 soon.
Quoted 46 lines
Ed,
how would you simplify__reg_bound_offset32logic ?Quoted 42 lines
kernel/bpf/verifier.c +18
-4+ + reg->var_off =tnum_or (hi32,tnum_intersect (lo32, range)); +} +/* Reset the min/max bounds of a register */ static void __mark_reg_unbounded (struct bpf_reg_state *reg) {@@ -5587,8 +5601,13 @@ static void reg_set_min_max(struct bpf_reg_state *true_reg,__reg_deduce_bounds (false_reg);__reg_deduce_bounds (true_reg);/* We might have learned some bits from the bounds. */ -__reg_bound_offset (false_reg); -__reg_bound_offset (true_reg); +if (is_jmp32) { +__reg_bound_offset32 (false_reg); +__reg_bound_offset32 (true_reg); + }else { +__reg_bound_offset (false_reg); +__reg_bound_offset (true_reg); + }/* Intersecting with the old var_off might have improved our bounds * slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), * then new var_off is (0; 0x7f...fc) which improves our umax. @@ -5696,8 +5715,13 @@ static void reg_set_min_max_inv(struct bpf_reg_state *true_reg,__reg_deduce_bounds (false_reg);__reg_deduce_bounds (true_reg);/* We might have learned some bits from the bounds. */ -__reg_bound_offset (false_reg); -__reg_bound_offset (true_reg); +if (is_jmp32) { +__reg_bound_offset32 (false_reg); +__reg_bound_offset32 (true_reg); + }else { +__reg_bound_offset (false_reg); +__reg_bound_offset (true_reg); + }/* Intersecting with the old var_off might have improved our bounds * slightly. e.g. if umax was 0x7f...f and var_off was (0; 0xf...fc), * then new var_off is (0; 0x7f...fc) which improves our umax. Signature · 1 line
2.17.1
PATCH 2/2 tools/bpf: add verifier tests for better jmp32 register bounds
In reply to Yonghong SongThree test cases are added.
Test 1: jmp32 'reg op imm'.
Test 2: jmp32 'reg op reg' where dst 'reg' has unknown constant
and src 'reg' has known constant
Test 3: jmp32 'reg op reg' where dst 'reg' has known constant
and src 'reg' has unknown constant
--- tools/testing/selftests/bpf/verifier/jmp32.c | 83 ++++++++++++++++++++ 1 file changed, 83 insertions(+)
tools/testing/selftests/bpf/verifier/jmp32.c +83 -0
@@ -744,3 +744,86 @@ .result = ACCEPT, .retval = 2, }, +{ + "jgt32: range bound deduction, reg op imm", + .insns = { +BPF_ST_MEM (BPF_DW ,BPF_REG_10 ,-8 ,0 ), +BPF_MOV64_REG (BPF_REG_8 ,BPF_REG_1 ), +BPF_MOV64_REG (BPF_REG_2 ,BPF_REG_10 ), +BPF_ALU64_IMM (BPF_ADD ,BPF_REG_2 ,-8 ), +BPF_LD_MAP_FD (BPF_REG_1 ,0 ), +BPF_RAW_INSN (BPF_JMP |BPF_CALL ,0 ,0 ,0 , BPF_FUNC_map_lookup_elem), +BPF_JMP_IMM (BPF_JEQ ,BPF_REG_0 ,0 ,9 ), +BPF_MOV64_REG (BPF_REG_1 ,BPF_REG_8 ), +BPF_MOV64_REG (BPF_REG_8 ,BPF_REG_0 ), +BPF_EMIT_CALL (BPF_FUNC_get_cgroup_classid), +BPF_JMP32_IMM (BPF_JGT ,BPF_REG_0 ,1 ,5 ), +BPF_MOV32_REG (BPF_REG_6 ,BPF_REG_0 ), +BPF_ALU64_IMM (BPF_LSH ,BPF_REG_6 ,32 ), +BPF_ALU64_IMM (BPF_RSH ,BPF_REG_6 ,32 ), +BPF_ALU64_REG (BPF_ADD ,BPF_REG_8 ,BPF_REG_6 ), +BPF_ST_MEM (BPF_B ,BPF_REG_8 ,0 ,0 ), +BPF_MOV32_IMM (BPF_REG_0 ,0 ), + BPF_EXIT_INSN(), + }, + .prog_type =BPF_PROG_TYPE_SCHED_CLS , + .fixup_map_hash_48b = { 4 }, + .result = ACCEPT, + .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS, +}, +{ +"jgt32: range bound deduction, reg1 op reg2, reg1 unknown" , + .insns = { +BPF_ST_MEM (BPF_DW ,BPF_REG_10 ,-8 ,0 ), +BPF_MOV64_REG (BPF_REG_8 ,BPF_REG_1 ), +BPF_MOV64_REG (BPF_REG_2 ,BPF_REG_10 ), +BPF_ALU64_IMM (BPF_ADD ,BPF_REG_2 ,-8 ), +BPF_LD_MAP_FD (BPF_REG_1 ,0 ), +BPF_RAW_INSN (BPF_JMP |BPF_CALL ,0 ,0 ,0 , BPF_FUNC_map_lookup_elem), +BPF_JMP_IMM (BPF_JEQ ,BPF_REG_0 ,0 ,10 ), +BPF_MOV64_REG (BPF_REG_1 ,BPF_REG_8 ), +BPF_MOV64_REG (BPF_REG_8 ,BPF_REG_0 ), +BPF_EMIT_CALL (BPF_FUNC_get_cgroup_classid), +BPF_MOV32_IMM (BPF_REG_2 ,1 ), +BPF_JMP32_REG (BPF_JGT ,BPF_REG_0 ,BPF_REG_2 ,5 ), +BPF_MOV32_REG (BPF_REG_6 ,BPF_REG_0 ), +BPF_ALU64_IMM (BPF_LSH ,BPF_REG_6 ,32 ), +BPF_ALU64_IMM (BPF_RSH ,BPF_REG_6 ,32 ), +BPF_ALU64_REG (BPF_ADD ,BPF_REG_8 ,BPF_REG_6 ), +BPF_ST_MEM (BPF_B ,BPF_REG_8 ,0 ,0 ), +BPF_MOV32_IMM (BPF_REG_0 ,0 ), + BPF_EXIT_INSN(), + }, + .prog_type =BPF_PROG_TYPE_SCHED_CLS , + .fixup_map_hash_48b = { 4 }, + .result = ACCEPT, + .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS, +}, +{ +"jle32: range bound deduction, reg1 op reg2, reg2 unknown" , + .insns = { +BPF_ST_MEM (BPF_DW ,BPF_REG_10 ,-8 ,0 ), +BPF_MOV64_REG (BPF_REG_8 ,BPF_REG_1 ), +BPF_MOV64_REG (BPF_REG_2 ,BPF_REG_10 ), +BPF_ALU64_IMM (BPF_ADD ,BPF_REG_2 ,-8 ), +BPF_LD_MAP_FD (BPF_REG_1 ,0 ), +BPF_RAW_INSN (BPF_JMP |BPF_CALL ,0 ,0 ,0 , BPF_FUNC_map_lookup_elem), +BPF_JMP_IMM (BPF_JEQ ,BPF_REG_0 ,0 ,10 ), +BPF_MOV64_REG (BPF_REG_1 ,BPF_REG_8 ), +BPF_MOV64_REG (BPF_REG_8 ,BPF_REG_0 ), +BPF_EMIT_CALL (BPF_FUNC_get_cgroup_classid), +BPF_MOV32_IMM (BPF_REG_2 ,1 ), +BPF_JMP32_REG (BPF_JLE ,BPF_REG_2 ,BPF_REG_0 ,5 ), +BPF_MOV32_REG (BPF_REG_6 ,BPF_REG_0 ), +BPF_ALU64_IMM (BPF_LSH ,BPF_REG_6 ,32 ), +BPF_ALU64_IMM (BPF_RSH ,BPF_REG_6 ,32 ), +BPF_ALU64_REG (BPF_ADD ,BPF_REG_8 ,BPF_REG_6 ), +BPF_ST_MEM (BPF_B ,BPF_REG_8 ,0 ,0 ), +BPF_MOV32_IMM (BPF_REG_0 ,0 ), + BPF_EXIT_INSN(), + }, + .prog_type =BPF_PROG_TYPE_SCHED_CLS , + .fixup_map_hash_48b = { 4 }, + .result = ACCEPT, + .flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS, +},
Signature · 1 line
2.17.1