drivers: net: Fix Kconfig indentation, continued
Subsystems (11)
Networking Network drivers Networking drivers (wireless) Arm/Microchip (AT91) SoC support +7 more subsystems
PATCH 1/1 drivers: net: Fix Kconfig indentation, continued
Adjust indentation from spaces to tab (+optional two spaces) as in coding style. This fixes various indentation mixups (seven spaces, tab+one space, etc).
Signed-off-by Krzysztof Kozlowski <[email protected]>
--- drivers/net/Kconfig | 64 +++++++++---------- drivers/net/caif/Kconfig | 36 +++++------ .../net/ethernet/freescale/fs_enet/Kconfig | 8 +-- drivers/net/ieee802154/Kconfig | 12 ++-- drivers/net/wireless/ath/Kconfig | 12 ++-- drivers/net/wireless/ath/ar5523/Kconfig | 14 ++-- drivers/net/wireless/ath/ath9k/Kconfig | 58 ++++++++--------- drivers/net/wireless/atmel/Kconfig | 42 ++++++------ drivers/net/wireless/ralink/rt2x00/Kconfig | 44 ++++++------- drivers/net/wireless/ti/wl12xx/Kconfig | 8 +-- 10 files changed, 149 insertions(+), 149 deletions(-)
drivers/net/Kconfig +32 -32
@@ -153,22 +153,22 @@ config IPVLAN_L3S select NET_L3_MASTER_DEV config IPVLAN - tristate "IP-VLAN support" - depends on INET - depends on IPV6 || !IPV6 - ---help--- - This allows one to create virtual devices off of a main interface - and packets will be delivered based on the dest L3 (IPv6/IPv4 addr) - on packets. All interfaces (including the main interface) share L2 - making it transparent to the connected L2 switch. + tristate "IP-VLAN support" + depends on INET + depends on IPV6 || !IPV6 + ---help--- + This allows one to create virtual devices off of a main interface + and packets will be delivered based on the dest L3 (IPv6/IPv4 addr) + on packets. All interfaces (including the main interface) share L2 + making it transparent to the connected L2 switch. - Ipvlan devices can be added using the "ip" command from the - iproute2 package starting with the iproute2-3.19 release: + Ipvlan devices can be added using the "ip" command from the + iproute2 package starting with the iproute2-3.19 release: - "ip link add link <main-dev> [ NAME ] type ipvlan" + "ip link add link <main-dev> [ NAME ] type ipvlan" - To compile this driver as a module, choose M here: the module - will be called ipvlan. + To compile this driver as a module, choose M here: the module + will be called ipvlan. config IPVTAP tristate "IP-VLAN based tap driver"
@@ -185,11 +185,11 @@ config IPVTAP will be called ipvtap. config VXLAN - tristate "Virtual eXtensible Local Area Network (VXLAN)" - depends on INET - select NET_UDP_TUNNEL - select GRO_CELLS - ---help--- + tristate "Virtual eXtensible Local Area Network (VXLAN)" + depends on INET + select NET_UDP_TUNNEL + select GRO_CELLS + ---help--- This allows one to create vxlan virtual interfaces that provide Layer 2 Networks over Layer 3 Networks. VXLAN is often used to tunnel virtual network infrastructure in virtualized environments.
@@ -200,12 +200,12 @@ config VXLAN will be called vxlan. config GENEVE - tristate "Generic Network Virtualization Encapsulation" - depends on INET - depends on IPV6 || !IPV6 - select NET_UDP_TUNNEL - select GRO_CELLS - ---help--- + tristate "Generic Network Virtualization Encapsulation" + depends on INET + depends on IPV6 || !IPV6 + select NET_UDP_TUNNEL + select GRO_CELLS + ---help--- This allows one to create geneve virtual interfaces that provide Layer 2 Networks over Layer 3 Networks. GENEVE is often used to tunnel virtual network infrastructure in virtualized environments.
@@ -244,8 +244,8 @@ config MACSEC config NETCONSOLE tristate "Network console logging support" ---help--- - If you want to log kernel messages over the network, enable this. - See <file:Documentation/networking/netconsole.txt> for details. + If you want to log kernel messages over the network, enable this. + See <file:Documentation/networking/netconsole.txt> for details. config NETCONSOLE_DYNAMIC bool "Dynamic reconfiguration of logging targets"
@@ -362,12 +362,12 @@ config NET_VRF support enables VRF devices. config VSOCKMON - tristate "Virtual vsock monitoring device" - depends on VHOST_VSOCK - ---help--- - This option enables a monitoring net device for vsock sockets. It is - mostly intended for developers or support to debug vsock issues. If - unsure, say N. + tristate "Virtual vsock monitoring device" + depends on VHOST_VSOCK + ---help--- + This option enables a monitoring net device for vsock sockets. It is + mostly intended for developers or support to debug vsock issues. If + unsure, say N. endif # NET_CORE
drivers/net/caif/Kconfig +18 -18
@@ -16,37 +16,37 @@ config CAIF_TTY depends on CAIF && TTY default n ---help--- - The CAIF TTY transport driver is a Line Discipline (ldisc) - identified as N_CAIF. When this ldisc is opened from user space - it will redirect the TTY's traffic into the CAIF stack. + The CAIF TTY transport driver is a Line Discipline (ldisc) + identified as N_CAIF. When this ldisc is opened from user space + it will redirect the TTY's traffic into the CAIF stack. config CAIF_SPI_SLAVE tristate "CAIF SPI transport driver for slave interface" depends on CAIF && HAS_DMA default n ---help--- - The CAIF Link layer SPI Protocol driver for Slave SPI interface. - This driver implements a platform driver to accommodate for a - platform specific SPI device. A sample CAIF SPI Platform device is - provided in <file:Documentation/networking/caif/spi_porting.txt>. + The CAIF Link layer SPI Protocol driver for Slave SPI interface. + This driver implements a platform driver to accommodate for a + platform specific SPI device. A sample CAIF SPI Platform device is + provided in <file:Documentation/networking/caif/spi_porting.txt>. config CAIF_SPI_SYNC bool "Next command and length in start of frame" depends on CAIF_SPI_SLAVE default n ---help--- - Putting the next command and length in the start of the frame can - help to synchronize to the next transfer in case of over or under-runs. - This option also needs to be enabled on the modem. + Putting the next command and length in the start of the frame can + help to synchronize to the next transfer in case of over or under-runs. + This option also needs to be enabled on the modem. config CAIF_HSI - tristate "CAIF HSI transport driver" - depends on CAIF - default n - ---help--- - The CAIF low level driver for CAIF over HSI. - Be aware that if you enable this then you also need to - enable a low-level HSI driver. + tristate "CAIF HSI transport driver" + depends on CAIF + default n + ---help--- + The CAIF low level driver for CAIF over HSI. + Be aware that if you enable this then you also need to + enable a low-level HSI driver. config CAIF_VIRTIO tristate "CAIF virtio transport driver"
@@ -56,7 +56,7 @@ config CAIF_VIRTIO select GENERIC_ALLOCATOR default n ---help--- - The CAIF driver for CAIF over Virtio. + The CAIF driver for CAIF over Virtio. if CAIF_VIRTIO source "drivers/vhost/Kconfig.vringh"
drivers/net/ethernet/freescale/fs_enet/Kconfig +4 -4
@@ -1,9 +1,9 @@ # SPDX-License-Identifier: GPL-2.0-only config FS_ENET - tristate "Freescale Ethernet Driver" - depends on NET_VENDOR_FREESCALE && (CPM1 || CPM2 || PPC_MPC512x) - select MII - select PHYLIB + tristate "Freescale Ethernet Driver" + depends on NET_VENDOR_FREESCALE && (CPM1 || CPM2 || PPC_MPC512x) + select MII + select PHYLIB config FS_ENET_MPC5121_FEC def_bool y if (FS_ENET && PPC_MPC512x)
drivers/net/ieee802154/Kconfig +6 -6
@@ -74,9 +74,9 @@ config IEEE802154_ATUSB The module will be called 'atusb'. config IEEE802154_ADF7242 - tristate "ADF7242 transceiver driver" - depends on IEEE802154_DRIVERS && MAC802154 - depends on SPI + tristate "ADF7242 transceiver driver" + depends on IEEE802154_DRIVERS && MAC802154 + depends on SPI ---help--- Say Y here to enable the ADF7242 SPI 802.15.4 wireless controller.
@@ -107,9 +107,9 @@ config IEEE802154_CA8210_DEBUGFS management entities. config IEEE802154_MCR20A - tristate "MCR20A transceiver driver" - depends on IEEE802154_DRIVERS && MAC802154 - depends on SPI + tristate "MCR20A transceiver driver" + depends on IEEE802154_DRIVERS && MAC802154 + depends on SPI ---help--- Say Y here to enable the MCR20A SPI 802.15.4 wireless controller.
drivers/net/wireless/ath/Kconfig +6 -6
@@ -30,12 +30,12 @@ config ATH_DEBUG Right now only ath9k makes use of this. config ATH_TRACEPOINTS - bool "Atheros wireless tracing" - depends on ATH_DEBUG - depends on EVENT_TRACING - ---help--- - This option enables tracepoints for atheros wireless drivers. - Currently, ath9k makes use of this facility. + bool "Atheros wireless tracing" + depends on ATH_DEBUG + depends on EVENT_TRACING + ---help--- + This option enables tracepoints for atheros wireless drivers. + Currently, ath9k makes use of this facility. config ATH_REG_DYNAMIC_USER_REG_HINTS bool "Atheros dynamic user regulatory hints"
drivers/net/wireless/ath/ar5523/Kconfig +7 -7
@@ -1,9 +1,9 @@ # SPDX-License-Identifier: ISC config AR5523 - tristate "Atheros AR5523 wireless driver support" - depends on MAC80211 && USB - select ATH_COMMON - select FW_LOADER - ---help--- - This module add support for AR5523 based USB dongles such as D-Link - DWL-G132, Netgear WPN111 and many more. + tristate "Atheros AR5523 wireless driver support" + depends on MAC80211 && USB + select ATH_COMMON + select FW_LOADER + ---help--- + This module add support for AR5523 based USB dongles such as D-Link + DWL-G132, Netgear WPN111 and many more.
drivers/net/wireless/ath/ath9k/Kconfig +29 -29
74 lines not on this page · raw message
drivers/net/wireless/atmel/Kconfig +21 -21
50 lines not on this page · raw message
drivers/net/wireless/ralink/rt2x00/Kconfig +22 -22
60 lines not on this page · raw message
drivers/net/wireless/ti/wl12xx/Kconfig +4 -4
@@ -1,10 +1,10 @@ # SPDX-License-Identifier: GPL-2.0-only config WL12XX - tristate "TI wl12xx support" + tristate "TI wl12xx support" depends on MAC80211 - select WLCORE - ---help--- + select WLCORE + ---help--- This module adds support for wireless adapters based on TI wl1271, wl1273, wl1281 and wl1283 chipsets. This module does *not* include support for wl1251. For wl1251 support, use the separate homonymous - driver instead. + driver instead.
Signature · 1 line
2.17.1
From: Krzysztof Kozlowski <[email protected]>
Date: Thu, 21 Nov 2019 21:28:28 +0800
Quoted 5 lines
Adjust indentation from spaces to tab (+optional two spaces) as in coding style. This fixes various indentation mixups (seven spaces, tab+one space, etc).
Signed-off-by Krzysztof Kozlowski <[email protected]>
Applied to net-next.