board: ti: am43xx: remove net platform code
PATCH 1/1 board: ti: am43xx: remove net platform code
The TI AM43xx platform has DM_ETH and OF_CONTROL enabled, so remove networking platform code.
Signed-off-by Grygorii Strashko <[email protected]>
--- board/ti/am43xx/board.c | 106 +--------------------------------------- 1 file changed, 1 insertion(+), 105 deletions(-)
board/ti/am43xx/board.c +1 -105
@@ -8,6 +8,7 @@*/ #include <common.h> +#include <dm/uclass.h> #include <env.h> #include <i2c.h> #include <linux/errno.h>
@@ -26,8 +27,6 @@#include <power/pmic.h> #include <power/tps65218.h> #include <power/tps62362.h> -#include <miiphy.h> -#include <cpsw.h> #include <linux/usb/gadget.h> #include <dwc3-uboot.h> #include <dwc3-omap-uboot.h>
@@ -851,109 +850,6 @@ int board_usb_cleanup(int index, enum usb_init_type init)#endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */ #endif /* !CONFIG_IS_ENABLED(DM_USB_GADGET) */ -#ifdef CONFIG_DRIVER_TI_CPSW - -static void cpsw_control (int enabled) -{ -/* Additional controls can be added here */ -return ; -} - -static struct cpsw_slave_data cpsw_slaves[] = { - { - .slave_reg_ofs =0x208 , - .sliver_reg_ofs =0xd80 , - .phy_addr =16 , - }, - { - .slave_reg_ofs =0x308 , - .sliver_reg_ofs =0xdc0 , - .phy_addr =1 , - }, -}; - -static struct cpsw_platform_data cpsw_data = { - .mdio_base =CPSW_MDIO_BASE , - .cpsw_base =CPSW_BASE , - .mdio_div =0xff , - .channels =8 , - .cpdma_reg_ofs =0x800 , - .slaves =1 , - .slave_data = cpsw_slaves, - .ale_reg_ofs =0xd00 , - .ale_entries =1024 , - .host_port_reg_ofs =0x108 , - .hw_stats_reg_ofs =0x900 , - .bd_ram_ofs =0x2000 , - .mac_control = (1 <<5 ), - .control = cpsw_control, - .host_port_num =0 , - .version =CPSW_CTRL_VERSION_2 , -}; - -int board_eth_init (bd_t *bis) -{ -int rv; -uint8_t mac_addr[6 ]; -uint32_t mac_hi, mac_lo; - -/* try reading mac address from efuse */ - mac_lo =readl (&cdev->macid0l); - mac_hi =readl (&cdev->macid0h); - mac_addr[0 ] = mac_hi &0xFF ; - mac_addr[1 ] = (mac_hi &0xFF00 ) >>8 ; - mac_addr[2 ] = (mac_hi &0xFF0000 ) >>16 ; - mac_addr[3 ] = (mac_hi &0xFF000000 ) >>24 ; - mac_addr[4 ] = mac_lo &0xFF ; - mac_addr[5 ] = (mac_lo &0xFF00 ) >>8 ; - -if (!env_get ("ethaddr" )) { -puts ("<ethaddr> not set. Validating first E-fuse MAC\n" ); -if (is_valid_ethaddr (mac_addr)) -eth_env_set_enetaddr ("ethaddr" , mac_addr); - } - - mac_lo =readl (&cdev->macid1l); - mac_hi =readl (&cdev->macid1h); - mac_addr[0 ] = mac_hi &0xFF ; - mac_addr[1 ] = (mac_hi &0xFF00 ) >>8 ; - mac_addr[2 ] = (mac_hi &0xFF0000 ) >>16 ; - mac_addr[3 ] = (mac_hi &0xFF000000 ) >>24 ; - mac_addr[4 ] = mac_lo &0xFF ; - mac_addr[5 ] = (mac_lo &0xFF00 ) >>8 ; - -if (!env_get ("eth1addr" )) { -if (is_valid_ethaddr (mac_addr)) -eth_env_set_enetaddr ("eth1addr" , mac_addr); - } - -if (board_is_eposevm ()) { -writel (RMII_MODE_ENABLE |RMII_CHIPCKL_ENABLE , &cdev->miisel); - cpsw_slaves[0 ].phy_if =PHY_INTERFACE_MODE_RMII ; - cpsw_slaves[0 ].phy_addr =16 ; - }else if (board_is_sk ()) { -writel (RGMII_MODE_ENABLE , &cdev->miisel); - cpsw_slaves[0 ].phy_if =PHY_INTERFACE_MODE_RGMII ; - cpsw_slaves[0 ].phy_addr =4 ; - cpsw_slaves[1 ].phy_addr =5 ; - }else if (board_is_idk ()) { -writel (RGMII_MODE_ENABLE , &cdev->miisel); - cpsw_slaves[0 ].phy_if =PHY_INTERFACE_MODE_RGMII ; - cpsw_slaves[0 ].phy_addr =0 ; - }else { -writel (RGMII_MODE_ENABLE , &cdev->miisel); - cpsw_slaves[0 ].phy_if =PHY_INTERFACE_MODE_RGMII ; - cpsw_slaves[0 ].phy_addr =0 ; - } - - rv =cpsw_register (&cpsw_data); -if (rv <0 ) -printf ("Error %d registering CPSW switch\n" , rv); - -return rv; -} -#endif -#if defined(CONFIG_OF_LIBFDT ) && defined(CONFIG_OF_BOARD_SETUP )int ft_board_setup (void *blob,bd_t *bd) {
Signature · 1 line
2.17.1
PATCH 1/1 board: ti: am43xx: remove net platform code
Quoted 4 lines · Grygorii Strashko
The TI AM43xx platform has
DM_ETHandOF_CONTROLenabled, so remove networking platform code.Signed-off-by Grygorii Strashko <[email protected]>
Reviewed-by Lokesh Vutla <[email protected]>
Thanks and regards,
Lokesh