Skip to contentSkip to conversation

dmaengine: ti: edma: add missed operations

PATCH Applied Chuhong Yuan 3 participants 3 messages Nov 24, 2019 – Dec 10, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 dmaengine: ti: edma: add missed operations

The driver forgets to call pm_runtime_disable and pm_runtime_put_sync in probe failure and remove.
Add the calls and modify probe failure handling to fix it.

To simplify the fix, the patch adjusts the calling order and merges checks for devm_kcalloc.

Fixes 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")

---
Changes in v2:
- Add the missed pm_runtime_put_sync.
- Simplify the patch.
- Rebase to dma-next.

 drivers/dma/ti/edma.c | 37 ++++++++++++++++++++-----------------
 1 file changed, 20 insertions(+), 17 deletions(-)
drivers/dma/ti/edma.c +20 -17
index 756a3c951dc7..0628ee4bf1b4 100644
@@ -2289,13 +2289,6 @@ static int edma_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENODEV;
 
-	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0) {
-		dev_err(dev, "pm_runtime_get_sync() failed\n");
-		return ret;
-	}
-
 	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
 	if (ret)
 		return ret;
@@ -2326,27 +2319,31 @@ static int edma_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ecc);
 
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_get_sync() failed\n");
+		pm_runtime_disable(dev);
+		return ret;
+	}
+
 	/* Get eDMA3 configuration from IP */
 	ret = edma_setup_from_hw(dev, info, ecc);
 	if (ret)
-		return ret;
+		goto err_disable_pm;
 
 	/* Allocate memory based on the information we got from the IP */
 	ecc->slave_chans = devm_kcalloc(dev, ecc->num_channels,
 					sizeof(*ecc->slave_chans), GFP_KERNEL);
-	if (!ecc->slave_chans)
-		return -ENOMEM;
 
 	ecc->slot_inuse = devm_kcalloc(dev, BITS_TO_LONGS(ecc->num_slots),
 				       sizeof(unsigned long), GFP_KERNEL);
-	if (!ecc->slot_inuse)
-		return -ENOMEM;
 
 	ecc->channels_mask = devm_kcalloc(dev,
 					   BITS_TO_LONGS(ecc->num_channels),
 					   sizeof(unsigned long), GFP_KERNEL);
-	if (!ecc->channels_mask)
-		return -ENOMEM;
+	if (!ecc->slave_chans || !ecc->slot_inuse || !ecc->channels_mask)
+		goto err_disable_pm;
 
 	/* Mark all channels available initially */
 	bitmap_fill(ecc->channels_mask, ecc->num_channels);
@@ -2388,7 +2385,7 @@ static int edma_probe(struct platform_device *pdev)
 				       ecc);
 		if (ret) {
 			dev_err(dev, "CCINT (%d) failed --> %d\n", irq, ret);
-			return ret;
+			goto err_disable_pm;
 		}
 		ecc->ccint = irq;
 	}
@@ -2404,7 +2401,7 @@ static int edma_probe(struct platform_device *pdev)
 				       ecc);
 		if (ret) {
 			dev_err(dev, "CCERRINT (%d) failed --> %d\n", irq, ret);
-			return ret;
+			goto err_disable_pm;
 		}
 		ecc->ccerrint = irq;
 	}
@@ -2412,7 +2409,8 @@ static int edma_probe(struct platform_device *pdev)
 	ecc->dummy_slot = edma_alloc_slot(ecc, EDMA_SLOT_ANY);
 	if (ecc->dummy_slot < 0) {
 		dev_err(dev, "Can't allocate PaRAM dummy slot\n");
-		return ecc->dummy_slot;
+		ret = ecc->dummy_slot;
+		goto err_disable_pm;
 	}
 
 	queue_priority_mapping = info->queue_priority_mapping;
@@ -2512,6 +2510,9 @@ static int edma_probe(struct platform_device *pdev)
 
 err_reg1:
 	edma_free_slot(ecc, ecc->dummy_slot);
+err_disable_pm:
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
 	return ret;
 }
 
@@ -2542,6 +2543,8 @@ static int edma_remove(struct platform_device *pdev)
 	if (ecc->dma_memcpy)
 		dma_async_device_unregister(ecc->dma_memcpy);
 	edma_free_slot(ecc, ecc->dummy_slot);
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
 
 	return 0;
 }
Signature · 1 line
2.24.0
Acked-by on v2 1/1
#1 lore raw
Quoted 7 lines · Chuhong Yuan

The driver forgets to call pm_runtime_disable and pm_runtime_put_sync in probe failure and remove.
Add the calls and modify probe failure handling to fix it.

To simplify the fix, the patch adjusts the calling order and merges checks for devm_kcalloc.

Quoted 7 lines
Fixes 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/")

---
Changes in v2:
- Add the missed pm_runtime_put_sync.
- Simplify the patch.
- Rebase to dma-next.

Thank you,

Quoted 101 lines
 drivers/dma/ti/edma.c | 37 ++++++++++++++++++++-----------------
 1 file changed, 20 insertions(+), 17 deletions(-)
drivers/dma/ti/edma.c +18 -17
index 756a3c951dc7..0628ee4bf1b4 100644
@@ -2289,13 +2289,6 @@ static int edma_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENODEV;
 
-	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0) {
-		dev_err(dev, "pm_runtime_get_sync() failed\n");
-		return ret;
-	}
-
 	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
 	if (ret)
 		return ret;
@@ -2326,27 +2319,31 @@ static int edma_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, ecc);
 
+	pm_runtime_enable(dev);
+	ret = pm_runtime_get_sync(dev);
+	if (ret < 0) {
+		dev_err(dev, "pm_runtime_get_sync() failed\n");
+		pm_runtime_disable(dev);
+		return ret;
+	}
+
 	/* Get eDMA3 configuration from IP */
 	ret = edma_setup_from_hw(dev, info, ecc);
 	if (ret)
-		return ret;
+		goto err_disable_pm;
 
 	/* Allocate memory based on the information we got from the IP */
 	ecc->slave_chans = devm_kcalloc(dev, ecc->num_channels,
 					sizeof(*ecc->slave_chans), GFP_KERNEL);
-	if (!ecc->slave_chans)
-		return -ENOMEM;
 
 	ecc->slot_inuse = devm_kcalloc(dev, BITS_TO_LONGS(ecc->num_slots),
 				       sizeof(unsigned long), GFP_KERNEL);
-	if (!ecc->slot_inuse)
-		return -ENOMEM;
 
 	ecc->channels_mask = devm_kcalloc(dev,
 					   BITS_TO_LONGS(ecc->num_channels),
 					   sizeof(unsigned long), GFP_KERNEL);
-	if (!ecc->channels_mask)
-		return -ENOMEM;
+	if (!ecc->slave_chans || !ecc->slot_inuse || !ecc->channels_mask)
+		goto err_disable_pm;
 
 	/* Mark all channels available initially */
 	bitmap_fill(ecc->channels_mask, ecc->num_channels);
@@ -2388,7 +2385,7 @@ static int edma_probe(struct platform_device *pdev)
 				       ecc);
 		if (ret) {
 			dev_err(dev, "CCINT (%d) failed --> %d\n", irq, ret);
-			return ret;
+			goto err_disable_pm;
 		}
 		ecc->ccint = irq;
 	}
@@ -2404,7 +2401,7 @@ static int edma_probe(struct platform_device *pdev)
 				       ecc);
 		if (ret) {
 			dev_err(dev, "CCERRINT (%d) failed --> %d\n", irq, ret);
-			return ret;
+			goto err_disable_pm;
 		}
 		ecc->ccerrint = irq;
 	}
@@ -2412,7 +2409,8 @@ static int edma_probe(struct platform_device *pdev)
 	ecc->dummy_slot = edma_alloc_slot(ecc, EDMA_SLOT_ANY);
 	if (ecc->dummy_slot < 0) {
 		dev_err(dev, "Can't allocate PaRAM dummy slot\n");
-		return ecc->dummy_slot;
+		ret = ecc->dummy_slot;
+		goto err_disable_pm;
 	}
 
 	queue_priority_mapping = info->queue_priority_mapping;
@@ -2512,6 +2510,9 @@ static int edma_probe(struct platform_device *pdev)
 
 err_reg1:
 	edma_free_slot(ecc, ecc->dummy_slot);
+err_disable_pm:
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
 	return ret;
 }
 

drivers/dma/ti/edma.c static int edma_remove(struct platform_device *pdev) · line 2550

Quoted 8 lines
drivers/dma/ti/edma.c +2 -0
@@ -2542,6 +2543,8 @@ static int edma_remove(struct platform_device *pdev)
 	if (ecc->dma_memcpy)
 		dma_async_device_unregister(ecc->dma_memcpy);
 	edma_free_slot(ecc, ecc->dummy_slot);
+	pm_runtime_put_sync(dev);
+	pm_runtime_disable(dev);
 
 	return 0;
 }

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

maintainer Applied
#2 lore raw
In reply to Chuhong Yuan
Quoted 6 lines · Chuhong Yuan

The driver forgets to call pm_runtime_disable and pm_runtime_put_sync in probe failure and remove.
Add the calls and modify probe failure handling to fix it.

To simplify the fix, the patch adjusts the calling order and merges checks for devm_kcalloc.

Applied, thanks

Signature · 1 line
~Vinod