Add support for Solidrun CEX7 platforms
Subsystems (2)
cover Add support for Solidrun CEX7 platforms
Hi,
This series adds support for the Solidrun Clearfog CX and Honeycomb platforms that various developers have access to.
arch/arm64/boot/dts/freescale/Makefile | 2 + .../arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 123 +++++++++++++++++++++ .../boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts | 15 +++ .../dts/freescale/fsl-lx2160a-clearfog-itx.dtsi | 57 ++++++++++ .../boot/dts/freescale/fsl-lx2160a-honeycomb.dts | 15 +++ arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 20 ++++ 6 files changed, 232 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts
Signature · 3 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up According to speedtest.net: 11.9Mbps down 500kbps up
PATCH 1/2 arm64: dts: lx2160a: add MDIO descriptions
Add MDIO descriptions to the lx2160a dtsi file, so we can use them in the SolidRun Clearfog CX platform.
--- .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+)
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +20 -0
@@ -863,6 +863,26 @@ fsl,extts-fifo; }; + emdio1: mdio@8b96000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x00 0x8b96000 0x00 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "disabled"; + }; + + emdio2: mdio@8b97000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x00 0x8b97000 0x00 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "disabled"; + }; + fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>,
Signature · 1 line
2.20.1
PATCH 2/2 arm64: dts: lx2160a: add dts for CEX7 platforms
In reply to Russell King - ARM Linux adminFrom: Rabeeh Khoury <[email protected]>
The device tree enables the following features -
1. dpmac17 RGMII MAC connected to Atheros AR8035 phy
2. 2x MDIO busses
3. 2x USB 3.0 controllers
4. 4x SATA ports
5. MT35X 512Mb SPI flash
6. Temperature sensor on i2c0 channel 3
7. AMC6821 temperature and PWM fan controller (not fitted)
The module supports AMC6821 PWM controller which is not currently assembled on currently available Com Express 7 hardware.
This commit adds support for the Clearfog CX and Honeycomb variants, which are indentical in this patch, but once QSFP support is finished, only the Clearfog CX will have a QSFP description.
[Add Makefile patch, split into clearfog-cx and honeycomb variants, reworded commit -- rmk]
--- arch/arm64/boot/dts/freescale/Makefile | 2 + .../boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 123 ++++++++++++++++++ .../dts/freescale/fsl-lx2160a-clearfog-cx.dts | 15 +++ .../freescale/fsl-lx2160a-clearfog-itx.dtsi | 57 ++++++++ .../dts/freescale/fsl-lx2160a-honeycomb.dts | 15 +++ 5 files changed, 212 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts
arch/arm64/boot/dts/freescale/Makefile +2 -0
@@ -18,6 +18,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +123 -0
123 lines not on this page · raw message
arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts new file +15 -0
@@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A Clearfog CX board +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a-clearfog-itx.dtsi" + +/ { + model = "SolidRun LX2160A Clearfog CX"; + compatible = "solidrun,clearfog-cx", + "solidrun,lx2160a-cex7", "fsl,lx2160a"; +};
arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi new file +57 -0
57 lines not on this page · raw message
arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts new file +15 -0
@@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A Honeycomb board +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a-clearfog-itx.dtsi" + +/ { + model = "SolidRun LX2160A Honeycomb"; + compatible = "solidrun,honeycomb", + "solidrun,lx2160a-cex7", "fsl,lx2160a"; +};
Signature · 1 line
2.20.1
Re: [PATCH 1/2] arm64: dts: lx2160a: add MDIO descriptions
In reply to Russell KingQuoted 26 lines · Russell King
Add MDIO descriptions to the lx2160a dtsi file, so we can use them in the SolidRun Clearfog CX platform.
Signed-off-by Russell King <[email protected]>--- .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+)arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +10
-0@@ -863,6 +863,26 @@ fsl,extts-fifo; }; + emdio1: mdio@8b96000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x00 0x8b96000 0x00 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "disabled"; + }; +
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi line 885
Quoted 10 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +10
-0+ emdio2: mdio@8b97000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x00 0x8b97000 0x00 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "disabled"; + }; +
Ioana Ciornei already had a patch [1] adding emdio1, but unfortunately, emdio2 was missing from there.
Shawn
Quoted 6 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +0
-0fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>,Signature · 1 line
2.20.1
Re: [PATCH 2/2] arm64: dts: lx2160a: add dts for CEX7 platforms
In reply to Russell KingQuoted 56 lines · Russell King
From: Rabeeh Khoury <[email protected]>
The device tree enables the following features -
1. dpmac17 RGMII MAC connected to Atheros AR8035 phy
2. 2x MDIO busses
3. 2x USB 3.0 controllers
4. 4x SATA ports
5. MT35X 512Mb SPI flash
6. Temperature sensor on i2c0 channel 3
7. AMC6821 temperature and PWM fan controller (not fitted)The module supports AMC6821 PWM controller which is not currently assembled on currently available Com Express 7 hardware.
This commit adds support for the Clearfog CX and Honeycomb variants, which are indentical in this patch, but once QSFP support is finished, only the Clearfog CX will have a QSFP description.
Signed-off-by Rabeeh Khoury <[email protected]>[Add
Makefilepatch, split into clearfog-cx and honeycomb variants, reworded commit -- rmk]Signed-off-by Russell King <[email protected]>--- arch/arm64/boot/dts/freescale/Makefile | 2 + .../boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 123 ++++++++++++++++++ .../dts/freescale/fsl-lx2160a-clearfog-cx.dts | 15 +++ .../freescale/fsl-lx2160a-clearfog-itx.dtsi | 57 ++++++++ .../dts/freescale/fsl-lx2160a-honeycomb.dts | 15 +++ 5 files changed, 212 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtsarch/arm64/boot/dts/freescale/Makefile +2
-0@@ -18,6 +18,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtbarch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +3
-0@@ -0,0 +1,123 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A-CEx7
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi line 13
Quoted 10 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +10
-0+// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a.dtsi" + +/ { + model = "SolidRun LX2160A COM Express Type 7 module"; + compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a";
Any new compatible needs to be documented.
Quoted 29 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +29
-0+ + aliases { + crypto = &crypto; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "RT7290"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&crypto { + status = "okay"; +}; + +&esdhc1 { + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi line 52
Quoted 10 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +10
-0+ i2c-switch@77 { + compatible = "nxp,pca9547"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>;
As an idiomatic practice, we have a newline between properties and child node ...
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi line 60
Quoted 8 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +8
-0+ fan-temperature-ctrlr@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + cooling-min-state = <0>; + cooling-max-state = <9>; + #cooling-cells = <2>; + }; + };
... and in between nodes.
Quoted 21 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +21
-0+ i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + temperature-sensor@48 { + compatible = "nxp,sa56004"; + reg = <0x48>; + vcc-supply = <&sb_3v3>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi line 91
Quoted 10 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +10
-0+ rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + // IRQ10_B + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&fspi { + status = "okay";
Ditto
Quoted 13 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +13
-0+ flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,m25p80"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <0>; + /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */ + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; + }; +}; +
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi line 114
Quoted 10 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +10
-0+&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&emdio1 { + status = "okay";
Ditto
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi line 120
Quoted 6 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +6
-0+ rgmii_phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&dpmac17 {
Instead of putting labeled nodes arbitrarily, we want to keep them sorted alphabetically.
Shawn
Quoted 111 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +3
-0+ phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; +};arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts new file +15
-0@@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A Clearfog CX board +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a-clearfog-itx.dtsi" + +/ { + model = "SolidRun LX2160A Clearfog CX"; + compatible = "solidrun,clearfog-cx", + "solidrun,lx2160a-cex7", "fsl,lx2160a"; +};arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi new file +57
-0@@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A Clearfog ITX board; this contains the +// common parts shared between the Clearfog CX and Honeycomb builds. +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a-cex7.dtsi" + +/ { + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&esdhc0 { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&emdio2 { + status = "okay"; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +};arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts new file +15
-0@@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A Honeycomb board +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a-clearfog-itx.dtsi" + +/ { + model = "SolidRun LX2160A Honeycomb"; + compatible = "solidrun,honeycomb", + "solidrun,lx2160a-cex7", "fsl,lx2160a"; +};Signature · 1 line
2.20.1
Re: [PATCH 2/2] arm64: dts: lx2160a: add dts for CEX7 platforms
Quoted 61 lines · Shawn Guo
Quoted 60 lines · Russell King
From: Rabeeh Khoury <[email protected]>
The device tree enables the following features -
1. dpmac17 RGMII MAC connected to Atheros AR8035 phy
2. 2x MDIO busses
3. 2x USB 3.0 controllers
4. 4x SATA ports
5. MT35X 512Mb SPI flash
6. Temperature sensor on i2c0 channel 3
7. AMC6821 temperature and PWM fan controller (not fitted)The module supports AMC6821 PWM controller which is not currently assembled on currently available Com Express 7 hardware.
This commit adds support for the Clearfog CX and Honeycomb variants, which are indentical in this patch, but once QSFP support is finished, only the Clearfog CX will have a QSFP description.
Signed-off-by Rabeeh Khoury <[email protected]>[Add
Makefilepatch, split into clearfog-cx and honeycomb variants, reworded commit -- rmk]Signed-off-by Russell King <[email protected]>--- arch/arm64/boot/dts/freescale/Makefile | 2 + .../boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 123 ++++++++++++++++++ .../dts/freescale/fsl-lx2160a-clearfog-cx.dts | 15 +++ .../freescale/fsl-lx2160a-clearfog-itx.dtsi | 57 ++++++++ .../dts/freescale/fsl-lx2160a-honeycomb.dts | 15 +++ 5 files changed, 212 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi create mode 100644 arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dtsarch/arm64/boot/dts/freescale/Makefile +2
-0@@ -18,6 +18,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtbarch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +7
-0@@ -0,0 +1,123 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A-CEx7 +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/;
Quoted 8 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi line 13
Quoted 6 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +6
-0+ +#include "fsl-lx2160a.dtsi" + +/ { + model = "SolidRun LX2160A COM Express Type 7 module"; + compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a";Any new compatible needs to be documented.
Grepping for "lx2160a-qds" and "lx2160a-rdb" in that tree shows no matches. Maybe all lx2160a boards should be documented together when a place for such documentation is decided upon. (In other words, no, I'm not going to do as you requested until the existing boards are given the same treatment you're requesting - otherwise it's unfair.)
Quoted 238 lines
Quoted 29 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +29
-0+ + aliases { + crypto = &crypto; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "RT7290"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&crypto { + status = "okay"; +}; + +&esdhc1 { + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; +arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi line 52
Quoted 10 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +10
-0+ i2c-switch@77 { + compatible = "nxp,pca9547"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x77>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>;As an idiomatic practice, we have a newline between properties and child node ...
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi line 60
Quoted 8 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +8
-0+ fan-temperature-ctrlr@18 { + compatible = "ti,amc6821"; + reg = <0x18>; + cooling-min-state = <0>; + cooling-max-state = <9>; + #cooling-cells = <2>; + }; + };... and in between nodes.
Quoted 21 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +21
-0+ i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + temperature-sensor@48 { + compatible = "nxp,sa56004"; + reg = <0x48>; + vcc-supply = <&sb_3v3>; + }; + }; + }; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi line 91
Quoted 10 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +10
-0+ rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + // IRQ10_B + interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + +&fspi { + status = "okay";Ditto
Quoted 13 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +13
-0+ flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,m25p80"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <0>; + /* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */ + spi-rx-bus-width = <8>; + spi-tx-bus-width = <1>; + }; +}; +arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi line 114
Quoted 10 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +10
-0+&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&emdio1 { + status = "okay";Ditto
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi line 120
Quoted 6 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +6
-0+ rgmii_phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&dpmac17 {Instead of putting labeled nodes arbitrarily, we want to keep them sorted alphabetically.
Shawn
Quoted 111 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +3
-0+ phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; +};arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts new file +15
-0@@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A Clearfog CX board +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a-clearfog-itx.dtsi" + +/ { + model = "SolidRun LX2160A Clearfog CX"; + compatible = "solidrun,clearfog-cx", + "solidrun,lx2160a-cex7", "fsl,lx2160a"; +};arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi new file +57
-0@@ -0,0 +1,57 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A Clearfog ITX board; this contains the +// common parts shared between the Clearfog CX and Honeycomb builds. +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a-cex7.dtsi" + +/ { + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&esdhc0 { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&emdio2 { + status = "okay"; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +};arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts new file +15
-0@@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A Honeycomb board +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/; + +#include "fsl-lx2160a-clearfog-itx.dtsi" + +/ { + model = "SolidRun LX2160A Honeycomb"; + compatible = "solidrun,honeycomb", + "solidrun,lx2160a-cex7", "fsl,lx2160a"; +};Signature · 1 line
2.20.1
Signature · 3 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up According to speedtest.net: 11.9Mbps down 500kbps up
Re: [PATCH 1/2] arm64: dts: lx2160a: add MDIO descriptions
In reply to Shawn GuoQuoted 41 lines · Shawn Guo
Quoted 26 lines · Russell King
Add MDIO descriptions to the lx2160a dtsi file, so we can use them in the SolidRun Clearfog CX platform.
Signed-off-by Russell King <[email protected]>--- .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+)arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +10
-0@@ -863,6 +863,26 @@ fsl,extts-fifo; }; + emdio1: mdio@8b96000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x00 0x8b96000 0x00 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "disabled"; + }; +arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi line 885
Quoted 10 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +10
-0+ emdio2: mdio@8b97000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x00 0x8b97000 0x00 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "disabled"; + }; +Ioana Ciornei already had a patch [1] adding emdio1, but unfortunately, emdio2 was missing from there.
Quoted 3 lines
Shawn
Okay, I'll wait until after the next merge window before resubmitting. Thanks.
Signature · 3 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up According to speedtest.net: 11.9Mbps down 500kbps up
Re: [PATCH 1/2] arm64: dts: lx2160a: add MDIO descriptions
Quoted 42 lines · Russell King - ARM Linux admin
Quoted 41 lines · Shawn Guo
Quoted 26 lines · Russell King
Add MDIO descriptions to the lx2160a dtsi file, so we can use them in the SolidRun Clearfog CX platform.
Signed-off-by Russell King <[email protected]>--- .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+)arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +10
-0@@ -863,6 +863,26 @@ fsl,extts-fifo; }; + emdio1: mdio@8b96000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x00 0x8b96000 0x00 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "disabled"; + }; +arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi line 885
Quoted 10 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +10
-0+ emdio2: mdio@8b97000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x00 0x8b97000 0x00 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "disabled"; + }; +Ioana Ciornei already had a patch [1] adding emdio1, but unfortunately, emdio2 was missing from there.
Quoted 6 lines
Quoted 3 lines
Shawn
Okay, I'll wait until after the next merge window before resubmitting. Thanks.
Just to be clear: the reasons are:
1) Ioana's patch was _not_ copied to linux-arm-kernel as it should have been.
2) I can't download the patch off lkml.org to sanely rebase on top of it
3) I'm not hunting around to try and find it on another archive site
4) I'm not digging about in random git trees trying to find it.
This makes it unnecessarily difficult to progress these patches.
Signature · 3 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up According to speedtest.net: 11.9Mbps down 500kbps up
Re: [PATCH 1/2] arm64: dts: lx2160a: add MDIO descriptions
Quoted 50 lines · Russell King - ARM Linux admin
Quoted 42 lines · Russell King - ARM Linux admin
Quoted 41 lines · Shawn Guo
Quoted 26 lines · Russell King
Add MDIO descriptions to the lx2160a dtsi file, so we can use them in the SolidRun Clearfog CX platform.
Signed-off-by Russell King <[email protected]>--- .../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+)arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +10
-0@@ -863,6 +863,26 @@ fsl,extts-fifo; }; + emdio1: mdio@8b96000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x00 0x8b96000 0x00 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "disabled"; + }; +arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi line 885
Quoted 10 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +10
-0+ emdio2: mdio@8b97000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x00 0x8b97000 0x00 0x1000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + #address-cells = <0x01>; + #size-cells = <0x00>; + status = "disabled"; + }; +Ioana Ciornei already had a patch [1] adding emdio1, but unfortunately, emdio2 was missing from there.
Quoted 6 lines
Quoted 3 lines
Shawn
Okay, I'll wait until after the next merge window before resubmitting. Thanks.
Quoted 8 lines
Just to be clear: the reasons are:
1) Ioana's patch was _not_ copied to linux-arm-kernel as it should have been.
2) I can't download the patch off lkml.org to sanely rebase on top of it
3) I'm not hunting around to try and find it on another archive site
4) I'm not digging about in random git trees trying to find it.This makes it unnecessarily difficult to progress these patches.
Okay, I finally found it at:
Note that that was unnecessarily difficult - google was unable to find it. Ioana's patch should have been copied to linux-arm-kernel as per MAINTAINERS, but wasn't. Is copying the appropriate mailing lists for a patch now optional?
Signature · 3 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up According to speedtest.net: 11.9Mbps down 500kbps up
Re: [PATCH 1/2] arm64: dts: lx2160a: add MDIO descriptions
Quoted 8 lines · Russell King - ARM Linux admin
Okay, I finally found it at:
Note that that was unnecessarily difficult - google was unable to find it. Ioana's patch should have been copied to linux-arm-kernel as per
MAINTAINERS, but wasn't. Is copying the appropriate mailing lists for a patch now optional?
Absolutely no. I will remind people to copy appropriate mailing lists when sending patches. Sorry.
Shawn
Re: [PATCH 2/2] arm64: dts: lx2160a: add dts for CEX7 platforms
In reply to Russell King - ARM Linux adminQuoted 22 lines · Russell King - ARM Linux admin
Quoted 13 lines
Quoted 13 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +7
-0@@ -0,0 +1,123 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160A-CEx7 +// +// Copyright 2019 SolidRun Ltd. + +/dts-v1/;Quoted 8 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi line 13
Quoted 6 lines
arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi new file +6
-0+ +#include "fsl-lx2160a.dtsi" + +/ { + model = "SolidRun LX2160A COM Express Type 7 module"; + compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a";Any new compatible needs to be documented.
Quoted 6 lines
Grepping for "lx2160a-qds" and "lx2160a-rdb" in that tree shows no matches. Maybe all lx2160a boards should be documented together when a place for such documentation is decided upon. (In other words, no, I'm not going to do as you requested until the existing boards are given the same treatment you're requesting - otherwise it's unfair.)
Okay, I will create a patch to document "lx2160a-qds" and "lx2160a-rdb".
Shawn