mx7ulp: Add support for Embedded Artists COM board
Subsystems (3)
Fabio Estevam
reviewerPATCH v5 1/1 mx7ulp: Add support for Embedded Artists COM board
The Embedded Artists COM board is based on NXP i.MX7ULP.
It has a BD70528 PMIC from Rohm with discrete DCDC powering option and improved current observability (compared to the existing NXP i.MX7ULP EVK).
Add the initial support for the board.
---
Changes since v4:
- Lower the DDR frequency in DCD so that memtester can pass
arch/arm/dts/Makefile | 3 +- arch/arm/dts/imx7ulp-com.dts | 90 ++++++++++++++++++++ arch/arm/mach-imx/mx7ulp/Kconfig | 6 ++ board/ea/mx7ulp_com/Kconfig | 12 +++ board/ea/mx7ulp_com/MAINTAINERS | 6 ++ board/ea/mx7ulp_com/Makefile | 6 ++ board/ea/mx7ulp_com/imximage.cfg | 137 +++++++++++++++++++++++++++++++ board/ea/mx7ulp_com/mx7ulp_com.c | 48 +++++++++++ configs/mx7ulp_com_defconfig | 60 ++++++++++++++ include/configs/mx7ulp_com.h | 103 +++++++++++++++++++++++ 10 files changed, 470 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/imx7ulp-com.dts create mode 100644 board/ea/mx7ulp_com/Kconfig create mode 100644 board/ea/mx7ulp_com/MAINTAINERS create mode 100644 board/ea/mx7ulp_com/Makefile create mode 100644 board/ea/mx7ulp_com/imximage.cfg create mode 100644 board/ea/mx7ulp_com/mx7ulp_com.c create mode 100644 configs/mx7ulp_com_defconfig create mode 100644 include/configs/mx7ulp_com.h
arch/arm/dts/Makefile +2 -1
@@ -657,7 +657,8 @@ dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \ imx7d-pico-hobbit.dtb -dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb +dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-com.dtb \ + imx7ulp-evk.dtb dtb-$(CONFIG_ARCH_IMX8) += \ fsl-imx8qm-apalis.dtb \
arch/arm/dts/imx7ulp-com.dts new file +90 -0
90 lines not on this page · raw message
arch/arm/mach-imx/mx7ulp/Kconfig +6 -0
@@ -15,6 +15,11 @@ choice prompt "MX7ULP board select" optional +config TARGET_MX7ULP_COM + bool "Support MX7ULP COM board" + select MX7ULP + select SYS_ARCH_TIMER + config TARGET_MX7ULP_EVK bool "Support mx7ulp EVK board" select MX7ULP
@@ -22,6 +27,7 @@ config TARGET_MX7ULP_EVK endchoice +source "board/ea/mx7ulp_com/Kconfig" source "board/freescale/mx7ulp_evk/Kconfig" endif
board/ea/mx7ulp_com/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +if TARGET_MX7ULP_COM + +config SYS_BOARD + default "mx7ulp_com" + +config SYS_VENDOR + default "ea" + +config SYS_CONFIG_NAME + default "mx7ulp_com" + +endif
board/ea/mx7ulp_com/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +MX7ULPCOM BOARD +M: Fabio Estevam <[email protected]> +S: Maintained +F: board/ea/mx7ulp_com/ +F: include/configs/mx7ulp_com.h +F: configs/mx7ulp_com_defconfig
board/ea/mx7ulp_com/Makefile new file +6 -0
@@ -0,0 +1,6 @@ +# (C) Copyright 2016 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := mx7ulp_com.o
board/ea/mx7ulp_com/imximage.cfg new file +137 -0
137 lines not on this page · raw message
board/ea/mx7ulp_com/mx7ulp_com.c new file +48 -0
48 lines not on this page · raw message
configs/mx7ulp_com_defconfig new file +60 -0
60 lines not on this page · raw message
include/configs/mx7ulp_com.h new file +103 -0
103 lines not on this page · raw message
Signature · 1 line
2.17.1
Fabio Estevam
reviewerPATCH v5 1/1 mx7ulp: Add support for Embedded Artists COM board
Hi Stefano,
Quoted 9 lines · Fabio Estevam
The Embedded Artists COM board is based on NXP i.MX7ULP.
It has a BD70528 PMIC from Rohm with discrete DCDC powering option and improved current observability (compared to the existing NXP i.MX7ULP EVK).
Add the initial support for the board.
Signed-off-by Fabio Estevam <[email protected]>
Could this one be applied for 2020.01?
Thanks
PATCH v5 1/1 mx7ulp: Add support for Embedded Artists COM board
In reply to Fabio EstevamQuoted 5 lines
The Embedded Artists COM board is based on NXP i.MX7ULP.
It has a BD70528 PMIC from Rohm with discrete DCDC powering option and improved current observability (compared to the existing NXP i.MX7ULP EVK). Add the initial support for the board.Signed-off-by Fabio Estevam <[email protected]>
Applied to u-boot-imx, -next, thanks !
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================