dt-bindings: iio: chemical: Add bindings for Dynament Premier series single gas sensor
Subsystems (2)
PATCH 2/2 dt-bindings: iio: chemical: Add bindings for Dynament Premier series single gas sensor
Dynament Premier series single gas sensor.
--- .../iio/chemical/dynament,premier.yaml | 43 +++++++++++++++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 1 + 3 files changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml
Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml new file +43 -0
@@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/dynament,premier.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dynament Premier series single gas sensor + +maintainers: + - ruantu <[email protected]> + +description: | + single gas sensor capable of measuring gas concentration of dust + particles, multi-gas sensor are not supported. + + Specifications about the sensor can be found at: + https://www.dynament.com/_webedit/uploaded-files/All%20Files/SIL%20Data/tds0045_1.44.pdf, read chapter 1.5.2 Read live data simple + +properties: + compatible: + enum: + - dynament,premier + + vcc-supply: + description: regulator that provides power to the sensor + + reset-gpios: + description: GPIO connected to the RESET line + maxItems: 1 + +required: + - compatible + +examples: + - | + serial { + single-gas-sensor { + compatible = "dynament,premier"; + vcc-supply = <®_vcc5v0>; + }; + }; + +...
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -261,6 +261,8 @@ patternProperties: description: Dragino Technology Co., Limited "^dserve,.*": description: dServe Technology B.V. + "^dynament,.*": + description: Dynament, Ltd. "^ea,.*": description: Embedded Artists AB "^ebs-systart,.*":
MAINTAINERS +1 -0
@@ -13137,6 +13137,7 @@ DYNAMENT PREMIER SERIES SINGLE GAS SENSOR DRIVER M: ruantu <[email protected]> S: Maintained F: drivers/iio/chemical/premier.c +F: Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml PLANTOWER PMS7003 AIR POLLUTION SENSOR DRIVER M: Tomasz Duszynski <[email protected]>
Signature · 1 line
2.24.0
Jonathan Cameron
maintainerQuoted 16 lines · On Tue, 10 Dec 2019 13:37:44 +0800 ruantu <[email protected]> wrote:
Dynament Premier series single gas sensor.
Signed-off-by ruantu <[email protected]>--- .../iio/chemical/dynament,premier.yaml | 43 +++++++++++++++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + MAINTAINERS | 1 + 3 files changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/chemical/dynament,premier.yamlDocumentation/devicetree/bindings/iio/chemical/dynament,premier.yaml new file +0
-0
Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml line 1
Quoted 1 line
Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml new file +1
-0@@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0
The dt maintainers are asking if possible for all new bindings to be dual licensed with BSD as it makes them easier to reuse outside linux.
Quoted 18 lines
Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml new file +18
-0+%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/dynament,premier.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Dynament Premier series single gas sensor + +maintainers: + - ruantu <[email protected]> + +description: | + single gas sensor capable of measuring gas concentration of dust + particles, multi-gas sensor are not supported. + + Specifications about the sensor can be found at: + https://www.dynament.com/_webedit/uploaded-files/All%20Files/SIL%20Data/tds0045_1.44.pdf, read chapter 1.5.2 Read live data simple + +properties:
Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml line 29
Quoted 10 lines
Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml new file +10
-0+ compatible: + enum: + - dynament,premier + + vcc-supply: + description: regulator that provides power to the sensor + + reset-gpios: + description: GPIO connected to the RESET line + maxItems: 1
Good to have the regulator and reset defined from the start. It may be worth adding the regulator enable to the driver. Reset is actually optional I assume whereas power isn't (it's just a question of whether it is already turned on or not!)
Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml line 41
Quoted 12 lines
Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml new file +12
-0+ +required: + - compatible + +examples: + - | + serial { + single-gas-sensor { + compatible = "dynament,premier"; + vcc-supply = <®_vcc5v0>; + }; + };
Bindings have indented in multiples of 4 spaces I believe. That needs tidying up in this example.
Thanks,
Jonathan
Quoted 27 lines
Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml new file +2
-0+ +...Documentation/devicetree/bindings/vendor-prefixes.yaml +2
-0@@ -261,6 +261,8 @@ patternProperties: description: Dragino Technology Co., Limited "^dserve,.*": description: dServe Technology B.V. + "^dynament,.*": + description: Dynament, Ltd. "^ea,.*": description: Embedded Artists AB "^ebs-systart,.*":MAINTAINERS +1
-0@@ -13137,6 +13137,7 @@ DYNAMENT PREMIER SERIES SINGLE GAS SENSOR DRIVER M: ruantu <[email protected]> S: Maintained F: drivers/iio/chemical/premier.c +F: Documentation/devicetree/bindings/iio/chemical/dynament,premier.yaml PLANTOWER PMS7003 AIR POLLUTION SENSOR DRIVER M: Tomasz Duszynski <[email protected]>