hwmon: (pmbus) Add MAX20796 to devices supported by generic pmbus driver
Subsystems (2)
Guenter Roeck
maintainerPATCH 1/1 hwmon: (pmbus) Add MAX20796 to devices supported by generic pmbus driver
MAX20796 is a dual-phase scalable integrated voltage regulator with PMBus interface.
Signed-off-by Guenter Roeck <[email protected]>
--- Documentation/hwmon/pmbus.rst | 10 ++++++++++ drivers/hwmon/pmbus/Kconfig | 4 ++-- drivers/hwmon/pmbus/pmbus.c | 1 + 3 files changed, 13 insertions(+), 2 deletions(-)
Documentation/hwmon/pmbus.rst +10 -0
@@ -63,6 +63,16 @@ Supported chips: http://www.ti.com/lit/gpn/tps544c25 + * Maxim MAX20796 + + Prefix: 'max20796' + + Addresses scanned: - + + Datasheet: + + Not published + * Generic PMBus devices Prefix: 'pmbus'
drivers/hwmon/pmbus/Kconfig +2 -2
@@ -20,8 +20,8 @@ config SENSORS_PMBUS help If you say yes here you get hardware monitoring support for generic PMBus devices, including but not limited to ADP4000, BMR453, BMR454, - MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, TPS40400, TPS544B20, - TPS544B25, TPS544C20, TPS544C25, and UDT020. + MAX20796, MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, TPS40400, + TPS544B20, TPS544B25, TPS544C20, TPS544C25, and UDT020. This driver can also be built as a module. If so, the module will be called pmbus.
drivers/hwmon/pmbus/pmbus.c +1 -0
@@ -210,6 +210,7 @@ static const struct i2c_device_id pmbus_id[] = { {"dps460", (kernel_ulong_t)&pmbus_info_one_skip}, {"dps650ab", (kernel_ulong_t)&pmbus_info_one_skip}, {"dps800", (kernel_ulong_t)&pmbus_info_one_skip}, + {"max20796", (kernel_ulong_t)&pmbus_info_one}, {"mdt040", (kernel_ulong_t)&pmbus_info_one}, {"ncp4200", (kernel_ulong_t)&pmbus_info_one}, {"ncp4208", (kernel_ulong_t)&pmbus_info_one},
Signature · 1 line
2.17.1