Skip to contentSkip to conversation

iio: st_lsm6dsx: Mark predefined constants with __maybe_unused

PATCH In review Andy Shevchenko 2 participants 6 messages Dec 16, 2019 – Dec 23, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/3 iio: st_lsm6dsx: Mark predefined constants with __maybe_unused

Since we put static variable to a header file it's copied to each module that includes the header. But not all of them are actually used it.

Mark predefined constants with __maybe_unused to calm a compiler down:

In file included from drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c:17:
.../st_lsm6dsx/st_lsm6dsx.h:399:28: warning: ‘st_lsm6dsx_available_scan_masks’ defined but not used [-Wunused-const-variable=]

  399 | static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0};
      |                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../st_lsm6dsx/st_lsm6dsx.h:392:36: warning: ‘st_lsm6dsx_event’ defined but not used [-Wunused-const-variable=]
  392 | static const struct iio_event_spec st_lsm6dsx_event = {
      |                                    ^~~~~~~~~~~~~~~~

...

---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +5 -2
index dc55d7dff3eb..b3fbbae81955 100644
@@ -389,14 +389,17 @@ struct st_lsm6dsx_hw {
 	const struct st_lsm6dsx_settings *settings;
 };
 
-static const struct iio_event_spec st_lsm6dsx_event = {
+static __maybe_unused const struct iio_event_spec st_lsm6dsx_event = {
 	.type = IIO_EV_TYPE_THRESH,
 	.dir = IIO_EV_DIR_EITHER,
 	.mask_separate = BIT(IIO_EV_INFO_VALUE) |
 			 BIT(IIO_EV_INFO_ENABLE)
 };
 
-static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0};
+static __maybe_unused const unsigned long st_lsm6dsx_available_scan_masks[] = {
+	0x7, 0x0,
+};
+
 extern const struct dev_pm_ops st_lsm6dsx_pm_ops;
 
 int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
Signature · 1 line
2.24.0
#1 lore raw

PATCH 2/3 iio: st_lsm6dsx: Drop unneeded OF code

There is no need to have OF guard against ID table. Drop it for good.

---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 3 +--
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c +1 -2
index cd47ec1fedcb..0fb32131afce 100644
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
-#include <linux/of.h>
 #include <linux/regmap.h>
 
 #include "st_lsm6dsx.h"
@@ -122,7 +121,7 @@ static struct i2c_driver st_lsm6dsx_driver = {
 	.driver = {
 		.name = "st_lsm6dsx_i2c",
 		.pm = &st_lsm6dsx_pm_ops,
-		.of_match_table = of_match_ptr(st_lsm6dsx_i2c_of_match),
+		.of_match_table = st_lsm6dsx_i2c_of_match,
 	},
 	.probe = st_lsm6dsx_i2c_probe,
 	.id_table = st_lsm6dsx_i2c_id_table,
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c +1 -2
index 67ff36eac247..eb1086e4a951 100644
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
-#include <linux/of.h>
 #include <linux/regmap.h>
 
 #include "st_lsm6dsx.h"
@@ -122,7 +121,7 @@ static struct spi_driver st_lsm6dsx_driver = {
 	.driver = {
 		.name = "st_lsm6dsx_spi",
 		.pm = &st_lsm6dsx_pm_ops,
-		.of_match_table = of_match_ptr(st_lsm6dsx_spi_of_match),
+		.of_match_table = st_lsm6dsx_spi_of_match,
 	},
 	.probe = st_lsm6dsx_spi_probe,
 	.id_table = st_lsm6dsx_spi_id_table,
Signature · 1 line
2.24.0
maintainer
#2 lore raw

Re: [PATCH v1 2/3] iio: st_lsm6dsx: Drop unneeded OF code

Quoted 4 lines · On Mon, 16 Dec 2019 20:19:24 +0200 Andy Shevchenko…

There is no need to have OF guard against ID table. Drop it for good.

Agreed. Good to slowly push out this bit of legacy...

Applied to the togreg branch of iio.git and pushed out as testing.

Thanks,

Jonathan

Quoted 47 lines
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 3 +--
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 3 +--
 2 files changed, 2 insertions(+), 4 deletions(-)
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c +1 -2
index cd47ec1fedcb..0fb32131afce 100644
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
-#include <linux/of.h>
 #include <linux/regmap.h>
 
 #include "st_lsm6dsx.h"
@@ -122,7 +121,7 @@ static struct i2c_driver st_lsm6dsx_driver = {
 	.driver = {
 		.name = "st_lsm6dsx_i2c",
 		.pm = &st_lsm6dsx_pm_ops,
-		.of_match_table = of_match_ptr(st_lsm6dsx_i2c_of_match),
+		.of_match_table = st_lsm6dsx_i2c_of_match,
 	},
 	.probe = st_lsm6dsx_i2c_probe,
 	.id_table = st_lsm6dsx_i2c_id_table,
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c +1 -2
index 67ff36eac247..eb1086e4a951 100644
@@ -12,7 +12,6 @@
 #include <linux/module.h>
 #include <linux/spi/spi.h>
 #include <linux/slab.h>
-#include <linux/of.h>
 #include <linux/regmap.h>
 
 #include "st_lsm6dsx.h"
@@ -122,7 +121,7 @@ static struct spi_driver st_lsm6dsx_driver = {
 	.driver = {
 		.name = "st_lsm6dsx_spi",
 		.pm = &st_lsm6dsx_pm_ops,
-		.of_match_table = of_match_ptr(st_lsm6dsx_spi_of_match),
+		.of_match_table = st_lsm6dsx_spi_of_match,
 	},
 	.probe = st_lsm6dsx_spi_probe,
 	.id_table = st_lsm6dsx_spi_id_table,
#3 lore raw

PATCH 3/3 iio: st_lsm6dsx: Make use of device properties

In reply to Andy Shevchenko

Device property API allows to gather device resources from different sources, such as ACPI. Convert the drivers to unleash the power of device property API.

---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 26 ++++++++++----------
 1 file changed, 13 insertions(+), 13 deletions(-)
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +13 -13
index a7d40c02ce6b..2b01155d1f32 100644
@@ -54,6 +54,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/pm.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/bitfield.h>
 
@@ -1826,14 +1827,14 @@ static const struct iio_info st_lsm6dsx_gyro_info = {
 	.hwfifo_set_watermark = st_lsm6dsx_set_watermark,
 };
 
-static int st_lsm6dsx_of_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
+static int st_lsm6dsx_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
 {
-	struct device_node *np = hw->dev->of_node;
+	struct device *dev = hw->dev;
 
-	if (!np)
+	if (!dev_fwnode(dev))
 		return -EINVAL;
 
-	return of_property_read_u32(np, "st,drdy-int-pin", drdy_pin);
+	return device_property_read_u32(dev, "st,drdy-int-pin", drdy_pin);
 }
 
 static int
@@ -1842,7 +1843,7 @@ st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw,
 {
 	int err = 0, drdy_pin;
 
-	if (st_lsm6dsx_of_get_drdy_pin(hw, &drdy_pin) < 0) {
+	if (st_lsm6dsx_get_drdy_pin(hw, &drdy_pin) < 0) {
 		struct st_sensors_platform_data *pdata;
 		struct device *dev = hw->dev;
 
@@ -1871,15 +1872,15 @@ st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw,
 static int st_lsm6dsx_init_shub(struct st_lsm6dsx_hw *hw)
 {
 	const struct st_lsm6dsx_shub_settings *hub_settings;
-	struct device_node *np = hw->dev->of_node;
 	struct st_sensors_platform_data *pdata;
+	struct device *dev = hw->dev;
 	unsigned int data;
 	int err = 0;
 
 	hub_settings = &hw->settings->shub_settings;
 
-	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
-	if ((np && of_property_read_bool(np, "st,pullups")) ||
+	pdata = (struct st_sensors_platform_data *)dev->platform_data;
+	if ((dev_fwnode(dev) && device_property_read_bool(dev, "st,pullups")) ||
 	    (pdata && pdata->pullups)) {
 		err = st_lsm6dsx_set_page(hw, true);
 		if (err < 0)
@@ -2157,9 +2158,9 @@ static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
 
 static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
 {
-	struct device_node *np = hw->dev->of_node;
 	struct st_sensors_platform_data *pdata;
 	const struct st_lsm6dsx_reg *reg;
+	struct device *dev = hw->dev;
 	unsigned long irq_type;
 	bool irq_active_low;
 	int err;
@@ -2187,8 +2188,8 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
 	if (err < 0)
 		return err;
 
-	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
-	if ((np && of_property_read_bool(np, "drive-open-drain")) ||
+	pdata = (struct st_sensors_platform_data *)dev->platform_data;
+	if ((dev_fwnode(dev) && device_property_read_bool(dev, "drive-open-drain")) ||
 	    (pdata && pdata->open_drain)) {
 		reg = &hw->settings->irq_config.od;
 		err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
@@ -2218,7 +2219,6 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 {
 	struct st_sensors_platform_data *pdata = dev->platform_data;
 	const struct st_lsm6dsx_shub_settings *hub_settings;
-	struct device_node *np = dev->of_node;
 	struct st_lsm6dsx_hw *hw;
 	const char *name = NULL;
 	int i, err;
@@ -2281,7 +2281,7 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 			return err;
 	}
 
-	if ((np && of_property_read_bool(np, "wakeup-source")) ||
+	if ((dev_fwnode(dev) && device_property_read_bool(dev, "wakeup-source")) ||
 	    (pdata && pdata->wakeup_source))
 		device_init_wakeup(dev, true);
 
Signature · 1 line
2.24.0
maintainer
#4 lore raw

Re: [PATCH v1 3/3] iio: st_lsm6dsx: Make use of device properties

Quoted 4 lines · On Mon, 16 Dec 2019 20:19:25 +0200 Andy Shevchenko…

Device property API allows to gather device resources from different sources, such as ACPI. Convert the drivers to unleash the power of device property API.

Looks good to me. I'd ideally like Lorenzo of someone else to give it a sanity check. However, I confident enough to add it to the branch that gets pushed out for build tests in the meantime.

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to play with it.

Thanks,

Jonathan

Quoted 102 lines
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 26 ++++++++++----------
 1 file changed, 13 insertions(+), 13 deletions(-)
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +13 -13
index a7d40c02ce6b..2b01155d1f32 100644
@@ -54,6 +54,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/pm.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/bitfield.h>
 
@@ -1826,14 +1827,14 @@ static const struct iio_info st_lsm6dsx_gyro_info = {
 	.hwfifo_set_watermark = st_lsm6dsx_set_watermark,
 };
 
-static int st_lsm6dsx_of_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
+static int st_lsm6dsx_get_drdy_pin(struct st_lsm6dsx_hw *hw, int *drdy_pin)
 {
-	struct device_node *np = hw->dev->of_node;
+	struct device *dev = hw->dev;
 
-	if (!np)
+	if (!dev_fwnode(dev))
 		return -EINVAL;
 
-	return of_property_read_u32(np, "st,drdy-int-pin", drdy_pin);
+	return device_property_read_u32(dev, "st,drdy-int-pin", drdy_pin);
 }
 
 static int
@@ -1842,7 +1843,7 @@ st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw,
 {
 	int err = 0, drdy_pin;
 
-	if (st_lsm6dsx_of_get_drdy_pin(hw, &drdy_pin) < 0) {
+	if (st_lsm6dsx_get_drdy_pin(hw, &drdy_pin) < 0) {
 		struct st_sensors_platform_data *pdata;
 		struct device *dev = hw->dev;
 
@@ -1871,15 +1872,15 @@ st_lsm6dsx_get_drdy_reg(struct st_lsm6dsx_hw *hw,
 static int st_lsm6dsx_init_shub(struct st_lsm6dsx_hw *hw)
 {
 	const struct st_lsm6dsx_shub_settings *hub_settings;
-	struct device_node *np = hw->dev->of_node;
 	struct st_sensors_platform_data *pdata;
+	struct device *dev = hw->dev;
 	unsigned int data;
 	int err = 0;
 
 	hub_settings = &hw->settings->shub_settings;
 
-	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
-	if ((np && of_property_read_bool(np, "st,pullups")) ||
+	pdata = (struct st_sensors_platform_data *)dev->platform_data;
+	if ((dev_fwnode(dev) && device_property_read_bool(dev, "st,pullups")) ||
 	    (pdata && pdata->pullups)) {
 		err = st_lsm6dsx_set_page(hw, true);
 		if (err < 0)
@@ -2157,9 +2158,9 @@ static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private)
 
 static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
 {
-	struct device_node *np = hw->dev->of_node;
 	struct st_sensors_platform_data *pdata;
 	const struct st_lsm6dsx_reg *reg;
+	struct device *dev = hw->dev;
 	unsigned long irq_type;
 	bool irq_active_low;
 	int err;
@@ -2187,8 +2188,8 @@ static int st_lsm6dsx_irq_setup(struct st_lsm6dsx_hw *hw)
 	if (err < 0)
 		return err;
 
-	pdata = (struct st_sensors_platform_data *)hw->dev->platform_data;
-	if ((np && of_property_read_bool(np, "drive-open-drain")) ||
+	pdata = (struct st_sensors_platform_data *)dev->platform_data;
+	if ((dev_fwnode(dev) && device_property_read_bool(dev, "drive-open-drain")) ||
 	    (pdata && pdata->open_drain)) {
 		reg = &hw->settings->irq_config.od;
 		err = regmap_update_bits(hw->regmap, reg->addr, reg->mask,
@@ -2218,7 +2219,6 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 {
 	struct st_sensors_platform_data *pdata = dev->platform_data;
 	const struct st_lsm6dsx_shub_settings *hub_settings;
-	struct device_node *np = dev->of_node;
 	struct st_lsm6dsx_hw *hw;
 	const char *name = NULL;
 	int i, err;
@@ -2281,7 +2281,7 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
 			return err;
 	}
 
-	if ((np && of_property_read_bool(np, "wakeup-source")) ||
+	if ((dev_fwnode(dev) && device_property_read_bool(dev, "wakeup-source")) ||
 	    (pdata && pdata->wakeup_source))
 		device_init_wakeup(dev, true);
 
maintainer
#5 lore raw
In reply to Andy Shevchenko
Quoted 7 lines · On Mon, 16 Dec 2019 20:19:23 +0200 Andy Shevchenko…

Since we put static variable to a header file it's copied to each module that includes the header. But not all of them are actually used it.

Mark predefined constants with __maybe_unused to calm a compiler down:

In file included from drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c:17:
.../st_lsm6dsx/st_lsm6dsx.h:399:28: warning: ‘st_lsm6dsx_available_scan_masks’ defined but not used [-Wunused-const-variable=]

Quoted 8 lines
  399 | static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0};
      |                            ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.../st_lsm6dsx/st_lsm6dsx.h:392:36: warning: ‘st_lsm6dsx_event’ defined but not used [-Wunused-const-variable=]
  392 | static const struct iio_event_spec st_lsm6dsx_event = {
      |                                    ^~~~~~~~~~~~~~~~

...

Huh, I wonder we I never saw this one either locally or from the autobuilders.

Applied to the togreg branch of iio.git and pushed out as testing for the autobuilders to have a fun Christmas poking at it ;)

Thanks,

Jonathan

Quoted 28 lines
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +5 -2
index dc55d7dff3eb..b3fbbae81955 100644
@@ -389,14 +389,17 @@ struct st_lsm6dsx_hw {
 	const struct st_lsm6dsx_settings *settings;
 };
 
-static const struct iio_event_spec st_lsm6dsx_event = {
+static __maybe_unused const struct iio_event_spec st_lsm6dsx_event = {
 	.type = IIO_EV_TYPE_THRESH,
 	.dir = IIO_EV_DIR_EITHER,
 	.mask_separate = BIT(IIO_EV_INFO_VALUE) |
 			 BIT(IIO_EV_INFO_ENABLE)
 };
 
-static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0};
+static __maybe_unused const unsigned long st_lsm6dsx_available_scan_masks[] = {
+	0x7, 0x0,
+};
+
 extern const struct dev_pm_ops st_lsm6dsx_pm_ops;
 
 int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,