ARM: stm32: Allow overriding setup_mac_address()
Subsystems (3)
PATCH 1/1 ARM: stm32: Allow overriding setup_mac_address()
Let board code override setup_mac_address(), which is useful e.g. if the board derives the MAC address from another source, like an I2C EEPROM.
--- arch/arm/mach-stm32mp/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-stm32mp/cpu.c +1 -1
@@ -449,7 +449,7 @@ static void setup_boot_mode(void)* If there is no MAC address in the environment, then it will be initialized * (silently) from the value in the OTP. */ -static int setup_mac_address (void ) +__weak int setup_mac_address (void ) {#if defined(CONFIG_NET )int ret;
Signature · 1 line
2.24.1
PATCH 1/1 ARM: stm32: Allow overriding setup_mac_address()
Hi Marek,
Quoted 9 lines
From: Marek Vasut <[email protected]>
Sent: mercredi 18 décembre 2019 07:59Let board code override
setup_mac_address(), which is useful e.g. if the board derives the MAC address from another source, like an I2C EEPROM.Signed-off-by Marek Vasut <[email protected]>Cc Patrick Delaunay <[email protected]>Cc Patrice Chotard <[email protected]>
Quoted 9 lines
--- arch/arm/mach-stm32mp/cpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)arch/arm/mach-stm32mp/cpu.c index renamed from arch/arm/mach-stm32mp/cpu.c +0
-0
ed7d9f61dc..856c7ced7a100644
arch/arm/mach-stm32mp/cpu.c static void setup_boot_mode(void) · line 452
Quoted 5 lines
arch/arm/mach-stm32mp/cpu.c +1
-1@@ -449,7 +449,7 @@ static void setup_boot_mode(void)* If there is no MAC address in the environment, then it will be initialized * (silently) from the value in the OTP. */ -static int setup_mac_address (void ) +__weak int setup_mac_address (void )
Perhaps add prototype in:arch/arm/mach-stm32mp/include/mach/sys_proto.h
just to avoid the new warning with W=1
warning: no previous prototype for 'setup_mac_address' [-Wmissing-prototypes]
Quoted 5 lines
arch/arm/mach-stm32mp/cpu.c +0
-1{#if defined(CONFIG_NET )int ret; --2.24.1
But anyway
Regards