Add RPMH power-domain node for SC7180 SoCs

deleted file mode 100644
index 6346d00b1b400..0000000000000
@@ -1,150 +0,0 @@
-Qualcomm RPM/RPMh Power domains
-
-For RPM/RPMh Power domains, we communicate a performance state to RPM/RPMh
-which then translates it into a corresponding voltage on a rail
-
-Required Properties:
- - compatible: Should be one of the following
-	* qcom,msm8976-rpmpd: RPM Power domain for the msm8976 family of SoC
-	* qcom,msm8996-rpmpd: RPM Power domain for the msm8996 family of SoC
-	* qcom,msm8998-rpmpd: RPM Power domain for the msm8998 family of SoC
-	* qcom,qcs404-rpmpd: RPM Power domain for the qcs404 family of SoC
-	* qcom,sc7180-rpmhpd: RPMh Power domain for the sc7180 family of SoC
-	* qcom,sdm845-rpmhpd: RPMh Power domain for the sdm845 family of SoC
-	* qcom,sm8150-rpmhpd: RPMh Power domain for the sm8150 family of SoC
- - #power-domain-cells: number of cells in Power domain specifier
-	must be 1.
- - operating-points-v2: Phandle to the OPP table for the Power domain.
-	Refer to Documentation/devicetree/bindings/power/power_domain.txt
-	and Documentation/devicetree/bindings/opp/opp.txt for more details
-
-Refer to <dt-bindings/power/qcom-rpmpd.h> for the level values for
-various OPPs for different platforms as well as Power domain indexes
-
-Example: rpmh power domain controller and OPP table
-
-#include <dt-bindings/power/qcom-rpmhpd.h>
-
-opp-level values specified in the OPP tables for RPMh power domains
-should use the RPMH_REGULATOR_LEVEL_* constants from
-<dt-bindings/power/qcom-rpmhpd.h>
-
-	rpmhpd: power-controller {
-		compatible = "qcom,sdm845-rpmhpd";
-		#power-domain-cells = <1>;
-		operating-points-v2 = <&rpmhpd_opp_table>;
-
-		rpmhpd_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			rpmhpd_opp_ret: opp1 {
-				opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
-			};
-
-			rpmhpd_opp_min_svs: opp2 {
-				opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
-			};
-
-			rpmhpd_opp_low_svs: opp3 {
-				opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
-			};
-
-			rpmhpd_opp_svs: opp4 {
-				opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
-			};
-
-			rpmhpd_opp_svs_l1: opp5 {
-				opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
-			};
-
-			rpmhpd_opp_nom: opp6 {
-				opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
-			};
-
-			rpmhpd_opp_nom_l1: opp7 {
-				opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
-			};
-
-			rpmhpd_opp_nom_l2: opp8 {
-				opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
-			};
-
-			rpmhpd_opp_turbo: opp9 {
-				opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
-			};
-
-			rpmhpd_opp_turbo_l1: opp10 {
-				opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
-			};
-		};
-	};
-
-Example: rpm power domain controller and OPP table
-
-	rpmpd: power-controller {
-		compatible = "qcom,msm8996-rpmpd";
-		#power-domain-cells = <1>;
-		operating-points-v2 = <&rpmpd_opp_table>;
-
-		rpmpd_opp_table: opp-table {
-			compatible = "operating-points-v2";
-
-			rpmpd_opp_low: opp1 {
-				opp-level = <1>;
-			};
-
-			rpmpd_opp_ret: opp2 {
-				opp-level = <2>;
-			};
-
-			rpmpd_opp_svs: opp3 {
-				opp-level = <3>;
-			};
-
-			rpmpd_opp_normal: opp4 {
-				opp-level = <4>;
-			};
-
-			rpmpd_opp_high: opp5 {
-				opp-level = <5>;
-			};
-
-			rpmpd_opp_turbo: opp6 {
-				opp-level = <6>;
-			};
-		};
-	};
-
-Example: Client/Consumer device using OPP table
-
-	leaky-device0@12350000 {
-		compatible = "foo,i-leak-current";
-		reg = <0x12350000 0x1000>;
-		power-domains = <&rpmhpd SDM845_MX>;
-		operating-points-v2 = <&leaky_opp_table>;
-	};
-
-
-	leaky_opp_table: opp-table {
-		compatible = "operating-points-v2";
-
-		opp1 {
-			opp-hz = /bits/ 64 <144000>;
-			required-opps = <&rpmhpd_opp_low>;
-		};
-
-		opp2 {
-			opp-hz = /bits/ 64 <400000>;
-			required-opps = <&rpmhpd_opp_ret>;
-		};
-
-		opp3 {
-			opp-hz = /bits/ 64 <20000000>;
-			required-opps = <&rpmpd_opp_svs>;
-		};
-
-		opp4 {
-			opp-hz = /bits/ 64 <25000000>;
-			required-opps = <&rpmpd_opp_normal>;
-		};
-	};

170 lines not on this page · raw message

index 01bbb58ae5160..fb17dc62d7ab1 100644
@@ -9,6 +9,7 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
+#include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {

@@ -1284,6 +1285,60 @@
 				clock-names = "xo";
 				#clock-cells = <1>;
 			};
+
+			rpmhpd: power-controller {
+				compatible = "qcom,sc7180-rpmhpd";
+				#power-domain-cells = <1>;
+				operating-points-v2 = <&rpmhpd_opp_table>;
+
+				rpmhpd_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					rpmhpd_opp_ret: opp1 {
+						opp-level = <RPMH_REGULATOR_LEVEL_RETENTION>;
+					};
+
+					rpmhpd_opp_min_svs: opp2 {
+						opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+					};
+
+					rpmhpd_opp_low_svs: opp3 {
+						opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+					};
+
+					rpmhpd_opp_svs: opp4 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+					};
+
+					rpmhpd_opp_svs_l1: opp5 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					};
+
+					rpmhpd_opp_svs_l2: opp6 {
+						opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+					};
+
+					rpmhpd_opp_nom: opp7 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					};
+
+					rpmhpd_opp_nom_l1: opp8 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+					};
+
+					rpmhpd_opp_nom_l2: opp9 {
+						opp-level = <RPMH_REGULATOR_LEVEL_NOM_L2>;
+					};
+
+					rpmhpd_opp_turbo: opp10 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					};
+
+					rpmhpd_opp_turbo_l1: opp11 {
+						opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					};
+				};
+			};
 		};
 
 		cpufreq_hw: cpufreq@18323000 {