ARC nSIM (AKA virtual & prototyping platform) updates
cover ARC nSIM (AKA virtual & prototyping platform) updates
In this small series we refubrish olde good nSIM configs & platform so that it no uses standard 16650 (in fact DesignWare) UART and little-endian HS version also gets Virtio support (Net & BLK) for use with QEMU.
Alexey Brodkin (3):
ARC: nSIM: switch from ARC UART to DW UART
ARC: nsim_{700|700be|hs38be}_defconfigs: Disable networking
ARC: nsim_hs38: Add support of Virtio NET & BLK
arch/arc/Kconfig | 4 ++--
arch/arc/dts/nsim.dts | 41 ++++++++++++++++++++++++++++++++++-----
board/synopsys/{ => nsim}/Kconfig | 3 +++
board/synopsys/nsim/MAINTAINERS | 6 ++++++
board/synopsys/nsim/Makefile | 7 +++++++
board/synopsys/nsim/nsim.c | 26 +++++++++++++++++++++++++
configs/nsim_700_defconfig | 9 +++++----
configs/nsim_700be_defconfig | 9 +++++----
configs/nsim_hs38_defconfig | 17 ++++++++++++----
configs/nsim_hs38be_defconfig | 9 +++++----
10 files changed, 108 insertions(+), 23 deletions(-)
rename board/synopsys/{ => nsim}/Kconfig (74%)
create mode 100644 board/synopsys/nsim/MAINTAINERS
create mode 100644 board/synopsys/nsim/Makefile
create mode 100644 board/synopsys/nsim/nsim.cSignature · 1 line
2.16.2
PATCH 1/3 ARC: nSIM: switch from ARC UART to DW UART
Since v2019.06 DesingWare nSIM supports DesignWare UART simulation and so we may switch from pretty unusual ARC UART to much more standard DesignWare UART (which in case of U-Boot is just an ordinary 16650 UART).
This among other things makes built dinaries compatible with our other platforms to name a few: FPGA-based HAPS boards, QEMU and even ZeBU.
--- arch/arc/dts/nsim.dts | 12 +++++++----- configs/nsim_700_defconfig | 8 ++++---- configs/nsim_700be_defconfig | 8 ++++---- configs/nsim_hs38_defconfig | 8 ++++---- configs/nsim_hs38be_defconfig | 8 ++++---- 5 files changed, 23 insertions(+), 21 deletions(-)
arch/arc/dts/nsim.dts +7 -5
@@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0+ /* - * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com) + * Copyright (C) 2015-2016, 2019 Synopsys, Inc. (www.synopsys.com) */ /dts-v1/;
@@ -10,7 +10,7 @@ model = "snps,nsim"; aliases { - console = &arcuart0; + console = &uart0; }; cpu_card {
@@ -22,9 +22,11 @@ }; }; - arcuart0: serial at 0xc0fc1000 { - compatible = "snps,arc-uart"; - reg = <0xc0fc1000 0x100>; + uart0: serial at f0000000 { + compatible = "snps,dw-apb-uart"; + reg = <0xf0000000 0x1000>; + reg-shift = <2>; + reg-io-width = <4>; clock-frequency = <70000000>; };
configs/nsim_700_defconfig +4 -4
@@ -1,13 +1,13 @@ CONFIG_ARC=y CONFIG_TARGET_NSIM=y CONFIG_SYS_TEXT_BASE=0x81000000 -CONFIG_DEBUG_UART_BASE=0xc0fc1000 +CONFIG_DEBUG_UART_BASE=0xf0000000 CONFIG_DEBUG_UART_CLOCK=70000000 CONFIG_SYS_CLK_FREQ=70000000 CONFIG_DEBUG_UART=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyARC0,115200n8" +CONFIG_BOOTARGS="console=ttyS0,115200n8" CONFIG_SYS_PROMPT="nsim# " # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y
@@ -16,6 +16,6 @@ CONFIG_DEFAULT_DEVICE_TREE="nsim" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DM_SERIAL=y -CONFIG_DEBUG_ARC_SERIAL=y -CONFIG_ARC_SERIAL=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550=y CONFIG_USE_PRIVATE_LIBGCC=y
configs/nsim_700be_defconfig +4 -4
@@ -2,13 +2,13 @@ CONFIG_ARC=y CONFIG_CPU_BIG_ENDIAN=y CONFIG_TARGET_NSIM=y CONFIG_SYS_TEXT_BASE=0x81000000 -CONFIG_DEBUG_UART_BASE=0xc0fc1000 +CONFIG_DEBUG_UART_BASE=0xf0000000 CONFIG_DEBUG_UART_CLOCK=70000000 CONFIG_SYS_CLK_FREQ=70000000 CONFIG_DEBUG_UART=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyARC0,115200n8" +CONFIG_BOOTARGS="console=ttyS0,115200n8" CONFIG_SYS_PROMPT="nsim# " # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y
@@ -17,6 +17,6 @@ CONFIG_DEFAULT_DEVICE_TREE="nsim" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DM_SERIAL=y -CONFIG_DEBUG_ARC_SERIAL=y -CONFIG_ARC_SERIAL=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550=y CONFIG_USE_PRIVATE_LIBGCC=y
configs/nsim_hs38_defconfig +4 -4
@@ -2,13 +2,13 @@ CONFIG_ARC=y CONFIG_ISA_ARCV2=y CONFIG_TARGET_NSIM=y CONFIG_SYS_TEXT_BASE=0x81000000 -CONFIG_DEBUG_UART_BASE=0xc0fc1000 +CONFIG_DEBUG_UART_BASE=0xf0000000 CONFIG_DEBUG_UART_CLOCK=70000000 CONFIG_SYS_CLK_FREQ=70000000 CONFIG_DEBUG_UART=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyARC0,115200n8" +CONFIG_BOOTARGS="console=ttyS0,115200n8" CONFIG_SYS_PROMPT="nsim# " # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y
@@ -17,6 +17,6 @@ CONFIG_DEFAULT_DEVICE_TREE="nsim" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DM_SERIAL=y -CONFIG_DEBUG_ARC_SERIAL=y -CONFIG_ARC_SERIAL=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550=y CONFIG_USE_PRIVATE_LIBGCC=y
configs/nsim_hs38be_defconfig +4 -4
@@ -3,13 +3,13 @@ CONFIG_ISA_ARCV2=y CONFIG_CPU_BIG_ENDIAN=y CONFIG_TARGET_NSIM=y CONFIG_SYS_TEXT_BASE=0x81000000 -CONFIG_DEBUG_UART_BASE=0xc0fc1000 +CONFIG_DEBUG_UART_BASE=0xf0000000 CONFIG_DEBUG_UART_CLOCK=70000000 CONFIG_SYS_CLK_FREQ=70000000 CONFIG_DEBUG_UART=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyARC0,115200n8" +CONFIG_BOOTARGS="console=ttyS0,115200n8" CONFIG_SYS_PROMPT="nsim# " # CONFIG_CMD_SETEXPR is not set CONFIG_OF_CONTROL=y
@@ -18,6 +18,6 @@ CONFIG_DEFAULT_DEVICE_TREE="nsim" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_DM_SERIAL=y -CONFIG_DEBUG_ARC_SERIAL=y -CONFIG_ARC_SERIAL=y +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYS_NS16550=y CONFIG_USE_PRIVATE_LIBGCC=y
Signature · 1 line
2.16.2
PATCH 2/3 ARC: nsim_{700|700be|hs38be}_defconfigs: Disable networking
In reply to Alexey BrodkinWe don't have yet any brc700 or big-enadian platforms with networking support to run this particular configuration.
Whenever QEMU for ARC supports arc700 or big-endian targets we may revisit this one.
--- configs/nsim_700_defconfig | 1 + configs/nsim_700be_defconfig | 1 + configs/nsim_hs38be_defconfig | 1 + 3 files changed, 3 insertions(+)
configs/nsim_700_defconfig +1 -0
@@ -14,6 +14,7 @@ CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DEFAULT_DEVICE_TREE="nsim" CONFIG_SYS_RELOC_GD_ENV_ADDR=y +# CONFIG_NET is not set CONFIG_DM=y CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART_SHIFT=2
configs/nsim_700be_defconfig +1 -0
@@ -15,6 +15,7 @@ CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DEFAULT_DEVICE_TREE="nsim" CONFIG_SYS_RELOC_GD_ENV_ADDR=y +# CONFIG_NET is not set CONFIG_DM=y CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART_SHIFT=2
configs/nsim_hs38be_defconfig +1 -0
@@ -16,6 +16,7 @@ CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DEFAULT_DEVICE_TREE="nsim" CONFIG_SYS_RELOC_GD_ENV_ADDR=y +# CONFIG_NET is not set CONFIG_DM=y CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART_SHIFT=2
Signature · 1 line
2.16.2
PATCH 3/3 ARC: nsim_hs38: Add support of Virtio NET & BLK
In reply to Alexey BrodkinGiven now nsim_hs38 configuration is usable on QEMU and in QEMU we have Virtio working perfectly fine the next logical step is to add support of supported & known to work net & bkl to this config.
---
arch/arc/Kconfig | 4 ++--
arch/arc/dts/nsim.dts | 29 +++++++++++++++++++++++++++++
board/synopsys/{ => nsim}/Kconfig | 3 +++
board/synopsys/nsim/MAINTAINERS | 6 ++++++
board/synopsys/nsim/Makefile | 7 +++++++
board/synopsys/nsim/nsim.c | 26 ++++++++++++++++++++++++++
configs/nsim_hs38_defconfig | 9 +++++++++
7 files changed, 82 insertions(+), 2 deletions(-)
rename board/synopsys/{ => nsim}/Kconfig (74%)
create mode 100644 board/synopsys/nsim/MAINTAINERS
create mode 100644 board/synopsys/nsim/Makefile
create mode 100644 board/synopsys/nsim/nsim.carch/arc/Kconfig +2 -2
@@ -160,7 +160,7 @@ config TARGET_TB100 bool "Support tb100" config TARGET_NSIM - bool "Support standalone nSIM & Free nSIM" + bool "Support ARC simulation & prototyping platforms" config TARGET_AXS101 bool "Support Synopsys Designware SDP board AXS101"
@@ -184,10 +184,10 @@ config TARGET_IOT_DEVKIT endchoice source "board/abilis/tb100/Kconfig" -source "board/synopsys/Kconfig" source "board/synopsys/axs10x/Kconfig" source "board/synopsys/emsdp/Kconfig" source "board/synopsys/hsdk/Kconfig" source "board/synopsys/iot_devkit/Kconfig" +source "board/synopsys/nsim/Kconfig" endmenu
arch/arc/dts/nsim.dts +29 -0
@@ -30,4 +30,33 @@ clock-frequency = <70000000>; }; + virtio0: virtio at f0100000 { + compatible = "virtio,mmio"; + reg = <0xf0100000 0x2000>; + interrupts = <31>; + }; + + virtio1: virtio at f0102000 { + compatible = "virtio,mmio"; + reg = <0xf0102000 0x2000>; + interrupts = <32>; + }; + + virtio2: virtio at f0104000 { + compatible = "virtio,mmio"; + reg = <0xf0104000 0x2000>; + interrupts = <33>; + }; + + virtio3: virtio at f0106000 { + compatible = "virtio,mmio"; + reg = <0xf0106000 0x2000>; + interrupts = <34>; + }; + + virtio4: virtio at f0108000 { + compatible = "virtio,mmio"; + reg = <0xf0108000 0x2000>; + interrupts = <35>; + }; };
board/synopsys/nsim/Kconfig renamed from board/synopsys/Kconfig +3 -0
@@ -1,5 +1,8 @@ if TARGET_NSIM +config SYS_BOARD + default "nsim" + config SYS_VENDOR default "synopsys"
board/synopsys/nsim/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +EM DEVELOPMENT KIT BOARD +M: Alexey Brodkin <[email protected]> +S: Maintained +F: arch/arc/dts/nsim.dts +F: board/synopsys/nsim/ +F: configs/nsim_*_defconfig
board/synopsys/nsim/Makefile new file +7 -0
@@ -0,0 +1,7 @@ +# +# Copyright (C) 2019 Synopsys, Inc. All rights reserved. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += nsim.o
board/synopsys/nsim/nsim.c new file +26 -0
@@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Copyright (C) 2019 Synopsys, Inc. All rights reserved. +*/ + +#include <common.h> +#include <dm/device.h> +#include <virtio_types.h> +#include <virtio.h> + +int board_early_init_r (void ) +{ +/* +* Make sure virtio bus is enumerated so that peripherals +* on the virtio bus can be discovered by their drivers +*/ +virtio_init (); + +return 0 ; +} + +int checkboard (void ) +{ +printf ("Board: ARC virtual or prototyping platform\n" ); +return 0 ; +};
configs/nsim_hs38_defconfig +9 -0
@@ -9,14 +9,23 @@ CONFIG_DEBUG_UART=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y CONFIG_BOOTARGS="console=ttyS0,115200n8" +CONFIG_BOARD_EARLY_INIT_R=y CONFIG_SYS_PROMPT="nsim# " +CONFIG_CMD_DM=y # CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y CONFIG_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DEFAULT_DEVICE_TREE="nsim" CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y +CONFIG_BLK=y +CONFIG_HAVE_BLOCK_DEVICE=y +CONFIG_DM_ETH=y CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART_SHIFT=2 CONFIG_SYS_NS16550=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_NET=y +CONFIG_VIRTIO_BLK=y CONFIG_USE_PRIVATE_LIBGCC=y
Signature · 1 line
2.16.2