Skip to contentSkip to conversation

mfd: tqmx86: remove set but not used variable 'i2c_ien'

PATCH Applied yu kuai 2 participants 2 messages Jan 3, 2020 – Jan 7, 2020

Subsystems (2)
lore
Share & tools
lore

yu kuai

author
#0 lore raw

PATCH 1/1 mfd: tqmx86: remove set but not used variable 'i2c_ien'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/mfd/tqmx86.c: In function ‘tqmx86_probe’:
drivers/mfd/tqmx86.c:161:29: warning: variable ‘i2c_ien’ set but not used I[-Wunused-but-set-variable]

It is never used, and so can be removed.

---
 drivers/mfd/tqmx86.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/mfd/tqmx86.c +1 -2
index 22d2f02d855c..b9f48e588d95 100644
@@ -158,7 +158,7 @@ static int tqmx86_board_id_to_clk_rate(u8 board_id)
 
 static int tqmx86_probe(struct platform_device *pdev)
 {
-	u8 board_id, rev, i2c_det, i2c_ien, io_ext_int_val;
+	u8 board_id, rev, i2c_det, io_ext_int_val;
 	struct device *dev = &pdev->dev;
 	u8 gpio_irq_cfg, readback;
 	const char *board_name;
@@ -196,7 +196,6 @@ static int tqmx86_probe(struct platform_device *pdev)
 		 board_name, board_id, rev >> 4, rev & 0xf);
 
 	i2c_det = ioread8(io_base + TQMX86_REG_I2C_DETECT);
-	i2c_ien = ioread8(io_base + TQMX86_REG_I2C_INT_EN);
 
 	if (gpio_irq_cfg) {
 		io_ext_int_val =
Signature · 1 line
2.17.2
Applied
#1 lore raw
Quoted 6 lines · yu kuai

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/mfd/tqmx86.c: In function ‘tqmx86_probe’:
drivers/mfd/tqmx86.c:161:29: warning: variable ‘i2c_ien’ set but not used I[-Wunused-but-set-variable]

Quoted 6 lines

It is never used, and so can be removed.

---
 drivers/mfd/tqmx86.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

Applied, thanks.

Signature · 4 lines
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog