phy: mediatek: Fix Kconfig indentation
Subsystems (4)
PATCH v2 1/2 phy: mediatek: Fix Kconfig indentation
Adjust indentation from spaces to tab (+optional two spaces) as in coding style.
---
Changes since v1:
1. None
--- drivers/phy/mediatek/Kconfig | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
drivers/phy/mediatek/Kconfig +10 -10
@@ -3,12 +3,12 @@ # Phy drivers for Mediatek devices # config PHY_MTK_TPHY - tristate "MediaTek T-PHY Driver" - depends on ARCH_MEDIATEK && OF - select GENERIC_PHY - help - Say 'Y' here to add support for MediaTek T-PHY driver, - it supports multiple usb2.0, usb3.0 ports, PCIe and + tristate "MediaTek T-PHY Driver" + depends on ARCH_MEDIATEK && OF + select GENERIC_PHY + help + Say 'Y' here to add support for MediaTek T-PHY driver, + it supports multiple usb2.0, usb3.0 ports, PCIe and SATA, and meanwhile supports two version T-PHY which have different banks layout, the T-PHY with shared banks between multi-ports is first version, otherwise is second veriosn,
@@ -25,10 +25,10 @@ config PHY_MTK_UFS specified M-PHYs. config PHY_MTK_XSPHY - tristate "MediaTek XS-PHY Driver" - depends on ARCH_MEDIATEK && OF - select GENERIC_PHY - help + tristate "MediaTek XS-PHY Driver" + depends on ARCH_MEDIATEK && OF + select GENERIC_PHY + help Enable this to support the SuperSpeedPlus XS-PHY transceiver for USB3.1 GEN2 controllers on MediaTek chips. The driver supports multiple USB2.0, USB3.1 GEN2 ports.
Signature · 1 line
2.17.1
PATCH v2 2/2 phy: Enable compile testing for some of drivers
Some of the phy drivers can be compile tested to increase build coverage.
---
Changes since v1:
1. Add COMPILE_TEST to two Broadcom drivers.
--- drivers/phy/allwinner/Kconfig | 3 ++- drivers/phy/broadcom/Kconfig | 4 ++-- drivers/phy/marvell/Kconfig | 8 +++++--- drivers/phy/mediatek/Kconfig | 9 ++++++--- drivers/phy/samsung/Kconfig | 8 ++++---- drivers/phy/ti/Kconfig | 4 ++-- 6 files changed, 21 insertions(+), 15 deletions(-)
drivers/phy/allwinner/Kconfig +2 -1
@@ -48,7 +48,8 @@ config PHY_SUN9I_USB config PHY_SUN50I_USB3 tristate "Allwinner H6 SoC USB3 PHY driver" - depends on ARCH_SUNXI && HAS_IOMEM && OF + depends on ARCH_SUNXI || COMPILE_TEST + depends on HAS_IOMEM && OF depends on RESET_CONTROLLER select GENERIC_PHY help
drivers/phy/broadcom/Kconfig +2 -2
@@ -50,7 +50,7 @@ config PHY_BCM_NS_USB3 config PHY_NS2_PCIE tristate "Broadcom Northstar2 PCIe PHY driver" - depends on OF && MDIO_BUS_MUX_BCM_IPROC + depends on (OF && MDIO_BUS_MUX_BCM_IPROC) || (COMPILE_TEST && MDIO_BUS) select GENERIC_PHY default ARCH_BCM_IPROC help
@@ -83,7 +83,7 @@ config PHY_BRCM_SATA config PHY_BRCM_USB tristate "Broadcom STB USB PHY driver" - depends on ARCH_BRCMSTB + depends on ARCH_BRCMSTB || COMPILE_TEST depends on OF select GENERIC_PHY select SOC_BRCMSTB
drivers/phy/marvell/Kconfig +5 -3
@@ -10,14 +10,16 @@ config ARMADA375_USBCLUSTER_PHY config PHY_BERLIN_SATA tristate "Marvell Berlin SATA PHY driver" - depends on ARCH_BERLIN && HAS_IOMEM && OF + depends on ARCH_BERLIN || COMPILE_TEST + depends on OF && HAS_IOMEM select GENERIC_PHY help Enable this to support the SATA PHY on Marvell Berlin SoCs. config PHY_BERLIN_USB tristate "Marvell Berlin USB PHY Driver" - depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF + depends on ARCH_BERLIN || COMPILE_TEST + depends on OF && HAS_IOMEM && RESET_CONTROLLER select GENERIC_PHY help Enable this to support the USB PHY on Marvell Berlin SoCs.
@@ -95,7 +97,7 @@ config PHY_PXA_28NM_USB2 config PHY_PXA_USB tristate "Marvell PXA USB PHY Driver" - depends on ARCH_PXA || ARCH_MMP + depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST select GENERIC_PHY help Enable this to support Marvell PXA USB PHY driver for Marvell
drivers/phy/mediatek/Kconfig +6 -3
@@ -4,7 +4,8 @@ # config PHY_MTK_TPHY tristate "MediaTek T-PHY Driver" - depends on ARCH_MEDIATEK && OF + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on OF select GENERIC_PHY help Say 'Y' here to add support for MediaTek T-PHY driver,
@@ -16,7 +17,8 @@ config PHY_MTK_TPHY config PHY_MTK_UFS tristate "MediaTek UFS M-PHY driver" - depends on ARCH_MEDIATEK && OF + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on OF select GENERIC_PHY help Support for UFS M-PHY on MediaTek chipsets.
@@ -26,7 +28,8 @@ config PHY_MTK_UFS config PHY_MTK_XSPHY tristate "MediaTek XS-PHY Driver" - depends on ARCH_MEDIATEK && OF + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on OF select GENERIC_PHY help Enable this to support the SuperSpeedPlus XS-PHY transceiver for
drivers/phy/samsung/Kconfig +4 -4
@@ -32,7 +32,7 @@ config PHY_EXYNOS_PCIE config PHY_SAMSUNG_USB2 tristate "Samsung USB 2.0 PHY driver" depends on HAS_IOMEM - depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 || COMPILE_TEST select GENERIC_PHY select MFD_SYSCON default ARCH_EXYNOS
@@ -60,7 +60,7 @@ config PHY_EXYNOS5250_USB2 config PHY_S5PV210_USB2 bool "Support for S5PV210" depends on PHY_SAMSUNG_USB2 - depends on ARCH_S5PV210 + depends on ARCH_S5PV210 || COMPILE_TEST help Enable USB PHY support for S5PV210. This option requires that Samsung USB 2.0 PHY driver is enabled and means that support for this
@@ -69,7 +69,7 @@ config PHY_S5PV210_USB2 config PHY_EXYNOS5_USBDRD tristate "Exynos5 SoC series USB DRD PHY driver" - depends on ARCH_EXYNOS && OF + depends on (ARCH_EXYNOS && OF) || COMPILE_TEST depends on HAS_IOMEM depends on USB_DWC3_EXYNOS select GENERIC_PHY
@@ -82,7 +82,7 @@ config PHY_EXYNOS5_USBDRD config PHY_EXYNOS5250_SATA tristate "Exynos5250 Sata SerDes/PHY driver" - depends on SOC_EXYNOS5250 + depends on SOC_EXYNOS5250 || COMPILE_TEST depends on HAS_IOMEM depends on OF select GENERIC_PHY
drivers/phy/ti/Kconfig +2 -2
@@ -4,7 +4,7 @@ # config PHY_DA8XX_USB tristate "TI DA8xx USB PHY Driver" - depends on ARCH_DAVINCI_DA8XX + depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST select GENERIC_PHY select MFD_SYSCON help
@@ -14,7 +14,7 @@ config PHY_DA8XX_USB config PHY_DM816X_USB tristate "TI dm816x USB PHY driver" - depends on ARCH_OMAP2PLUS + depends on ARCH_OMAP2PLUS || COMPILE_TEST depends on USB_SUPPORT select GENERIC_PHY select USB_PHY
Signature · 1 line
2.17.1
Re: [PATCH v2 2/2] phy: Enable compile testing for some of drivers
Quoted 5 lines · Krzysztof Kozlowski
Some of the phy drivers can be compile tested to increase build coverage.
Signed-off-by Krzysztof Kozlowski <[email protected]>
Quoted 7 lines
---
Changes since v1:
1. AddCOMPILE_TESTto two Broadcom drivers.--- drivers/phy/allwinner/Kconfig | 3 ++- drivers/phy/broadcom/Kconfig | 4 ++--
For the two Broadcom PHY changes:
Signature · 1 line
Florian
Quoted 41 lines · Krzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style.
Signed-off-by Krzysztof Kozlowski <[email protected]>---
Changes since v1:
1. None--- drivers/phy/mediatek/Kconfig | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)drivers/phy/mediatek/Kconfig +6
-7@@ -3,12 +3,12 @@ # Phy drivers for Mediatek devices # config PHY_MTK_TPHY - tristate "MediaTek T-PHY Driver" - depends on ARCH_MEDIATEK && OF - select GENERIC_PHY - help - Say 'Y' here to add support for MediaTek T-PHY driver, - it supports multiple usb2.0, usb3.0 ports, PCIe and + tristate "MediaTek T-PHY Driver" + depends on ARCH_MEDIATEK && OF + select GENERIC_PHY + help + Say 'Y' here to add support for MediaTek T-PHY driver, + it supports multiple usb2.0, usb3.0 ports, PCIe and SATA, and meanwhile supports two version T-PHY which have different banks layout, the T-PHY with shared banks between multi-ports is first version, otherwise is second veriosn,@@ -25,10 +25,10 @@ config PHY_MTK_UFS specified M-PHYs. config PHY_MTK_XSPHY - tristate "MediaTek XS-PHY Driver"
drivers/phy/mediatek/Kconfig config PHY_MTK_UFS · line 34
Quoted 10 lines
drivers/phy/mediatek/Kconfig +4
-3- depends on ARCH_MEDIATEK && OF - select GENERIC_PHY - help + tristate "MediaTek XS-PHY Driver" + depends on ARCH_MEDIATEK && OF + select GENERIC_PHY + help Enable this to support the SuperSpeedPlus XS-PHY transceiver for USB3.1 GEN2 controllers on MediaTek chips. The driver supports multiple USB2.0, USB3.1 GEN2 ports.
Thanks
Stanley Chu
Reviewed-byQuoted 8 lines · Chunfeng Yun
Quoted 7 lines · Krzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style.
Signed-off-by Krzysztof Kozlowski <[email protected]>---
Re: [PATCH v2 2/2] phy: Enable compile testing for some of drivers
In reply to Krzysztof KozlowskiQuoted 4 lines · Krzysztof Kozlowski
Some of the phy drivers can be compile tested to increase build coverage.
Signed-off-by Krzysztof Kozlowski <[email protected]>
I've taken this through my usb tree as this is needed to resolve some build Kconfig warnings that now show up there.
thanks,
greg k-h