rockchip: Add Binman support
Subsystems (3)
v6 cover rockchip: Add Binman support
This is v6 set for Binman support in rockchip, [1] here is previous patchset.
This series add single boot image with binman for arm32 and pad_cat for arm64 rockchip platforms both TPL + SPL and SPL-alone targets.
Changes for v6:
- drop idbloader.img filename change patch
- update rockchip.rst to include, rockchip TPL, SPI boot as TODO Changes for v5:
- collect kever review tag
- drop idbloader.img from clean target
Changes for v4:
- support all rockchip platforms
- add new patches for dtsi changes
- update documentation
- format proper commit message
- rebase on master
Changes for v3:
- rebase on master
- add binman for rk3288, rk3328, rk3368, rk3399
- added rst documentation for rockchip
Changes for v2:
- Add few clean target patches
- update bl31.elf env handling code, with logging
- support puma itb, via BL31 and PMUM0 env
- enable BUILD_TARGET for ROCKCHIP_RK3399
[1] https://patchwork.ozlabs.org/cover/1216263/
Any inputs?
Jagan.
Jagan Teki (6):
Makefile: Add rockchip image type
Makefile: rockchip: Suffix platform type with tpl name
Makefile: rockchip: Support SPL-alone mkimage
arm: dts: rk3036: Add rk3036-u-boot.dtsi
rockchip: Add Single boot image (with binman, pad_cat)
doc: boards: Add rockchip documentation
Makefile | 36 ++++++-- arch/arm/Kconfig | 1 + arch/arm/dts/rk3036-sdk-u-boot.dtsi | 2 + arch/arm/dts/rk3036-u-boot.dtsi | 6 ++ arch/arm/dts/rk3288-u-boot.dtsi | 2 + arch/arm/dts/rockchip-u-boot.dtsi | 21 +++++ doc/board/rockchip/index.rst | 10 +++ doc/board/rockchip/rockchip.rst | 130 ++++++++++++++++++++++++++++ include/configs/rockchip-common.h | 3 + 9 files changed, 206 insertions(+), 5 deletions(-) create mode 100644 arch/arm/dts/rk3036-u-boot.dtsi create mode 100644 arch/arm/dts/rockchip-u-boot.dtsi create mode 100644 doc/board/rockchip/index.rst create mode 100644 doc/board/rockchip/rockchip.rst
Signature · 1 line
2.18.0.321.gffc6fa0e3
A message that is not in the archive (sent off-list or not yet received): 20200104083806.3930-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org
PATCH v6 1/6 Makefile: Add rockchip image type
Add rockchip image type support. right now the image type marked with rksd, So create image type variable with required image type like rksd or rkspi.
--- Makefile | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
Makefile +9 -1
@@ -1374,7 +1374,15 @@ u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE $(call if_changed,pad_cat) ifeq ($(CONFIG_ARCH_ROCKCHIP),y) -MKIMAGEFLAGS_u-boot-tpl.img = -n $(CONFIG_SYS_SOC) -T rksd + +# rockchip image type +ifeq ($(CONFIG_SPI_FLASH_SUPPORT),y) +ROCKCHIP_IMG_TYPE := rkspi +else +ROCKCHIP_IMG_TYPE := rksd +endif + +MKIMAGEFLAGS_u-boot-tpl.img = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE) tpl/u-boot-tpl.img: tpl/u-boot-tpl.bin FORCE $(call if_changed,mkimage) idbloader.img: tpl/u-boot-tpl.img spl/u-boot-spl.bin FORCE
Signature · 1 line
2.18.0.321.gffc6fa0e3
PATCH v6 2/6 Makefile: rockchip: Suffix platform type with tpl name
In reply to a message not in the archiveMost of the platforms uses the platform type on their boot stage image naming conventions in makefile like,
u-boot-x86-start16-tpl.bin - x86 start16 TPL bin
u-boot-spl-mtk.bin - Mediatek SPL bin
This would help to understand the users to what that particular image belongs to? and less confused.
On that note, suffix platform type rockchip for existing u-boot-tpl.img so now it become u-boot-tpl-rockchip.bin
Also, bin is more conventional way to include it on tools like binman, pad_cat etc in future patches.
Note: usage of platform type doesn't follow consistent order as of now.
--- Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
Makefile +3 -3
@@ -1382,10 +1382,10 @@ else ROCKCHIP_IMG_TYPE := rksd endif -MKIMAGEFLAGS_u-boot-tpl.img = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE) -tpl/u-boot-tpl.img: tpl/u-boot-tpl.bin FORCE +MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE) +tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE $(call if_changed,mkimage) -idbloader.img: tpl/u-boot-tpl.img spl/u-boot-spl.bin FORCE +idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE $(call if_changed,cat) endif
Signature · 1 line
2.18.0.321.gffc6fa0e3
PATCH v6 3/6 Makefile: rockchip: Support SPL-alone mkimage
In reply to a message not in the archiveAdd SPL-alone mkimage tooling support via Makefile for few platforms or boards used in rockchip family.
With this users would get rid of explicitly creating mkimage tool for rockchip rksd or rkspi boot modes.
--- Makefile | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
Makefile +9 -1
@@ -908,7 +908,7 @@ ifeq ($(CONFIG_MPC85xx)$(CONFIG_OF_SEPARATE),yy) ALL-y += u-boot-with-dtb.bin endif -ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL)$(CONFIG_TPL),yyy) +ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy) ALL-y += idbloader.img endif
@@ -1382,11 +1382,19 @@ else ROCKCHIP_IMG_TYPE := rksd endif +# TPL + SPL +ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy) MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE) tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE $(call if_changed,mkimage) idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE $(call if_changed,cat) +else +MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE) +idbloader.img: spl/u-boot-spl.bin FORCE + $(call if_changed,mkimage) +endif + endif ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
Signature · 1 line
2.18.0.321.gffc6fa0e3
PATCH v6 4/6 arm: dts: rk3036: Add rk3036-u-boot.dtsi
In reply to a message not in the archiveAdd U-Boot specific dtsi file for rk3036 SoC. This would help to add U-Boot specific dts nodes, properties which are common across rk3036.
Right now, the file is empty, will add required changes in future patches.
--- arch/arm/dts/rk3036-sdk-u-boot.dtsi | 2 ++ arch/arm/dts/rk3036-u-boot.dtsi | 4 ++++ 2 files changed, 6 insertions(+) create mode 100644 arch/arm/dts/rk3036-u-boot.dtsi
arch/arm/dts/rk3036-sdk-u-boot.dtsi +2 -0
@@ -1,3 +1,5 @@ +#include "rk3036-u-boot.dtsi" + &uart2 { u-boot,dm-pre-reloc; };
arch/arm/dts/rk3036-u-boot.dtsi new file +4 -0
@@ -0,0 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> + */
Signature · 1 line
2.18.0.321.gffc6fa0e3
PATCH v6 5/6 rockchip: Add Single boot image (with binman, pad_cat)
In reply to a message not in the archiveAll rockchip platforms support TPL or SPL-based bootloader in mainline with U-Boot proper as final stage. For each stage we need to burn the image on to flash with respective offsets.
This patch creates a single boot image component using
- binman, for arm32 rockchip platforms
- pad_cat, for arm64 rockchip platforms.
This would help users to get rid of burning different boot stage images.
The new image called 'u-boot-rockchip.bin'
which can burn into flash like:
₹ sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64
This would support all rockchip platforms, except rk3128 since it doesn't support for SPL yet.
--- Makefile | 14 ++++++++++++-- arch/arm/Kconfig | 1 + arch/arm/dts/rk3036-u-boot.dtsi | 2 ++ arch/arm/dts/rk3288-u-boot.dtsi | 2 ++ arch/arm/dts/rockchip-u-boot.dtsi | 21 +++++++++++++++++++++ include/configs/rockchip-common.h | 3 +++ 6 files changed, 41 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/rockchip-u-boot.dtsi
Makefile +12 -2
@@ -909,7 +909,7 @@ ALL-y += u-boot-with-dtb.bin endif ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy) -ALL-y += idbloader.img +ALL-y += u-boot-rockchip.bin endif LDFLAGS_u-boot += $(LDFLAGS_FINAL)
@@ -1395,7 +1395,17 @@ idbloader.img: spl/u-boot-spl.bin FORCE $(call if_changed,mkimage) endif -endif +ifeq ($(CONFIG_ARM64),) +u-boot-rockchip.bin: idbloader.img u-boot.img FORCE + $(call if_changed,binman) +else +OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \ + --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff +u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE + $(call if_changed,pad_cat) +endif # CONFIG_ARM64 + +endif # CONFIG_ARCH_ROCKCHIP ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy) MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
arch/arm/Kconfig +1 -0
@@ -1590,6 +1590,7 @@ config ARCH_STM32MP config ARCH_ROCKCHIP bool "Support Rockchip SoCs" select BLK + select BINMAN if !ARM64 select DM select DM_GPIO select DM_I2C
arch/arm/dts/rk3036-u-boot.dtsi +2 -0
@@ -2,3 +2,5 @@ /* * Copyright (C) 2019 Jagan Teki <[email protected]> */ + +#include "rockchip-u-boot.dtsi"
arch/arm/dts/rk3288-u-boot.dtsi +2 -0
@@ -3,6 +3,8 @@ * Copyright (C) 2019 Rockchip Electronics Co., Ltd */ +#include "rockchip-u-boot.dtsi" + / { chosen { u-boot,spl-boot-order = \
arch/arm/dts/rockchip-u-boot.dtsi new file +21 -0
@@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Jagan Teki <[email protected]> + */ + +#include <config.h> + +/ { + binman { + filename = "u-boot-rockchip.bin"; + pad-byte = <0xff>; + + blob { + filename = "idbloader.img"; + }; + + u-boot-img { + offset = <CONFIG_SPL_PAD_TO>; + }; + }; +};
include/configs/rockchip-common.h +3 -0
@@ -9,6 +9,9 @@#define CONFIG_SYS_NS16550_MEM32 +/* ((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512) */ +#define CONFIG_SPL_PAD_TO 8355840 +#ifndef CONFIG_SPL_BUILD /* First try to boot from SD (index 0), then eMMC (index 1) */
Signature · 7 lines
2.18.0.321.gffc6fa0e3 _______________________________________________ Linux-rockchip mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-rockchip
Re: [PATCH v6 5/6] rockchip: Add Single boot image (with binman, pad_cat)【请注意,邮件由linux-rockchip-bounces+kever.yang=rock-chips.com@lists.infradead.org代发】
Hi Jagan,
This patch seems like will cause error on rock_defconfig, could you take a look:
binman: Device tree 'u-boot.dtb' does not have a 'binman' node Makefile:1400: recipe for target 'u-boot-rockchip.bin' failed
Thanks,
- Kever
Quoted 142 lines · Jagan Teki
All rockchip platforms support TPL or SPL-based bootloader in mainline with U-Boot proper as final stage. For each stage we need to burn the image on to flash with respective offsets.
This patch creates a single boot image component using
- binman, for arm32 rockchip platforms
-pad_cat, for arm64 rockchip platforms.This would help users to get rid of burning different boot stage images.
The new image called 'u-boot-rockchip.bin'
which can burn into flash like:₹ sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64
This would support all rockchip platforms, except rk3128 since it doesn't support for SPL yet.
Cc Kever Yang <[email protected]>Cc Matwey V. Kornilov <[email protected]>Signed-off-by Jagan Teki <[email protected]>Reviewed-by Kever Yang <[email protected]>--- Makefile | 14 ++++++++++++-- arch/arm/Kconfig | 1 + arch/arm/dts/rk3036-u-boot.dtsi | 2 ++ arch/arm/dts/rk3288-u-boot.dtsi | 2 ++ arch/arm/dts/rockchip-u-boot.dtsi | 21 +++++++++++++++++++++ include/configs/rockchip-common.h | 3 +++ 6 files changed, 41 insertions(+), 2 deletions(-)create mode 100644
arch/arm/dts/rockchip-u-boot.dtsiMakefile +12
-2@@ -909,7 +909,7 @@ ALL-y += u-boot-with-dtb.bin endif ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL),yy) -ALL-y += idbloader.img +ALL-y += u-boot-rockchip.bin endif LDFLAGS_u-boot += $(LDFLAGS_FINAL)@@ -1395,7 +1395,17 @@ idbloader.img: spl/u-boot-spl.bin FORCE $(call if_changed,mkimage) endif -endif +ifeq ($(CONFIG_ARM64),) +u-boot-rockchip.bin: idbloader.img u-boot.img FORCE + $(call if_changed,binman) +else +OBJCOPYFLAGS_u-boot-rockchip.bin = -I binary -O binary \ + --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff +u-boot-rockchip.bin: idbloader.img u-boot.itb FORCE + $(call if_changed,pad_cat) +endif # CONFIG_ARM64 + +endif # CONFIG_ARCH_ROCKCHIP ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy) MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)arch/arm/Kconfig +1
-0@@ -1590,6 +1590,7 @@ config ARCH_STM32MP config ARCH_ROCKCHIP bool "Support Rockchip SoCs" select BLK + select BINMAN if !ARM64 select DM select DM_GPIO select DM_I2Carch/arm/dts/rk3036-u-boot.dtsi +2
-0@@ -2,3 +2,5 @@ /* * Copyright (C) 2019 Jagan Teki <[email protected]> */ + +#include "rockchip-u-boot.dtsi"arch/arm/dts/rk3288-u-boot.dtsi +2
-0@@ -3,6 +3,8 @@ * Copyright (C) 2019 Rockchip Electronics Co., Ltd */ +#include "rockchip-u-boot.dtsi" + / { chosen { u-boot,spl-boot-order = \arch/arm/dts/rockchip-u-boot.dtsi new file +21
-0@@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Jagan Teki <[email protected]> + */ + +#include <config.h> + +/ { + binman { + filename = "u-boot-rockchip.bin"; + pad-byte = <0xff>; + + blob { + filename = "idbloader.img"; + }; + + u-boot-img { + offset = <CONFIG_SPL_PAD_TO>; + }; + }; +};include/configs/rockchip-common.h +3
-0@@ -9,6 +9,9 @@#define CONFIG_SYS_NS16550_MEM32 +/* ((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512) */ +#define CONFIG_SPL_PAD_TO 8355840 +#ifndef CONFIG_SPL_BUILD /* First try to boot from SD (index 0), then eMMC (index 1) */
A message that is not in the archive (sent off-list or not yet received): 20200104083806.3930-6-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org
Re: [PATCH v6 5/6] rockchip: Add Single boot image (with binman, pad_cat)
Hi Jagan,
Quoted 10 lines · Jagan Teki
All rockchip platforms support TPL or SPL-based bootloader in mainline with U-Boot proper as final stage. For each stage we need to burn the image on to flash with respective offsets.
This patch creates a single boot image component using
- binman, for arm32 rockchip platforms
-pad_cat, for arm64 rockchip platforms.
Quoted 7 lines
This would help users to get rid of burning different boot stage images.
The new image called 'u-boot-rockchip.bin'
which can burn into flash like:₹ sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64
How about adding the initial 64 blocks into the image too, so the seek isn't needed?
Quoted 7 lines
This would support all rockchip platforms, except rk3128 since it doesn't support for SPL yet.
Cc Kever Yang <[email protected]>Cc Matwey V. Kornilov <[email protected]>Signed-off-by Jagan Teki <[email protected]>Reviewed-by Kever Yang <[email protected]>
Quoted 9 lines
--- Makefile | 14 ++++++++++++-- arch/arm/Kconfig | 1 + arch/arm/dts/rk3036-u-boot.dtsi | 2 ++ arch/arm/dts/rk3288-u-boot.dtsi | 2 ++ arch/arm/dts/rockchip-u-boot.dtsi | 21 +++++++++++++++++++++ include/configs/rockchip-common.h | 3 +++ 6 files changed, 41 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/rockchip-u-boot.dtsi
Regards,
Simon
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
Re: [PATCH v6 5/6] rockchip: Add Single boot image (with binman, pad_cat)
пт, 10 янв. 2020 г. в 12:39, Simon Glass <[email protected]>:
Quoted 17 lines
Hi Jagan,
Quoted 13 lines · Jagan Teki
All rockchip platforms support TPL or SPL-based bootloader in mainline with U-Boot proper as final stage. For each stage we need to burn the image on to flash with respective offsets.
This patch creates a single boot image component using
- binman, for arm32 rockchip platforms
-pad_cat, for arm64 rockchip platforms.This would help users to get rid of burning different boot stage images.
Quoted 8 lines
Quoted 4 lines
The new image called 'u-boot-rockchip.bin'
which can burn into flash like:₹ sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64
How about adding the initial 64 blocks into the image too, so the seek isn't needed?
It will break partition tables on the target device.
Quoted 19 lines
Quoted 7 lines
This would support all rockchip platforms, except rk3128 since it doesn't support for SPL yet.
Cc Kever Yang <[email protected]>Cc Matwey V. Kornilov <[email protected]>Signed-off-by Jagan Teki <[email protected]>Reviewed-by Kever Yang <[email protected]>Quoted 9 lines
--- Makefile | 14 ++++++++++++-- arch/arm/Kconfig | 1 + arch/arm/dts/rk3036-u-boot.dtsi | 2 ++ arch/arm/dts/rk3288-u-boot.dtsi | 2 ++ arch/arm/dts/rockchip-u-boot.dtsi | 21 +++++++++++++++++++++ include/configs/rockchip-common.h | 3 +++ 6 files changed, 41 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/rockchip-u-boot.dtsiRegards,
Simon
Signature · 2 lines
With best regards, Matwey V. Kornilov
Simon Glass
Reviewed-byRe: [PATCH v6 5/6] rockchip: Add Single boot image (with binman, pad_cat)
In reply to a message not in the archiveQuoted 25 lines · Jagan Teki
All rockchip platforms support TPL or SPL-based bootloader in mainline with U-Boot proper as final stage. For each stage we need to burn the image on to flash with respective offsets.
This patch creates a single boot image component using
- binman, for arm32 rockchip platforms
-pad_cat, for arm64 rockchip platforms.This would help users to get rid of burning different boot stage images.
The new image called 'u-boot-rockchip.bin'
which can burn into flash like:₹ sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64
This would support all rockchip platforms, except rk3128 since it doesn't support for SPL yet.
Cc Kever Yang <[email protected]>Cc Matwey V. Kornilov <[email protected]>Signed-off-by Jagan Teki <[email protected]>Reviewed-by Kever Yang <[email protected]>
Quoted 9 lines
--- Makefile | 14 ++++++++++++-- arch/arm/Kconfig | 1 + arch/arm/dts/rk3036-u-boot.dtsi | 2 ++ arch/arm/dts/rk3288-u-boot.dtsi | 2 ++ arch/arm/dts/rockchip-u-boot.dtsi | 21 +++++++++++++++++++++ include/configs/rockchip-common.h | 3 +++ 6 files changed, 41 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/rockchip-u-boot.dtsi
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
PATCH v6 6/6 doc: boards: Add rockchip documentation
In reply to a message not in the archiveRockchip has documentation file, doc/README.rockchip but which is not so readable to add or understand the existing contents. Even the format that support is legacy readme in U-Boot.
Add rockchip specific documentation file using new rst format, which describes the information about Rockchip supported boards and it's usage steps.
Added minimal information about rk3288, rk3328, rk3368 and rk3399 boards and usage. This would indeed updated further based on the requirements and updates.
--- doc/board/rockchip/index.rst | 10 +++ doc/board/rockchip/rockchip.rst | 130 ++++++++++++++++++++++++++++++++ 2 files changed, 140 insertions(+) create mode 100644 doc/board/rockchip/index.rst create mode 100644 doc/board/rockchip/rockchip.rst
doc/board/rockchip/index.rst new file +10 -0
@@ -0,0 +1,10 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. Copyright (C) 2019 Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> + +Rockchip +======== + +.. toctree:: + :maxdepth: 2 + + rockchip
doc/board/rockchip/rockchip.rst new file +130 -0
130 lines not on this page · raw message
Signature · 1 line
2.18.0.321.gffc6fa0e3
A message that is not in the archive (sent off-list or not yet received): 20200104083806.3930-7-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org
Kever Yang
Reviewed-byRe: [PATCH v6 6/6] doc: boards: Add rockchip documentation
Quoted 9 lines · Jagan Teki
Rockchip has documentation file, doc/README.rockchip but which is not so readable to add or understand the existing contents. Even the format that support is legacy readme in U-Boot.
Add rockchip specific documentation file using new rst format, which describes the information about Rockchip supported boards and it's usage steps.
Quoted 7 lines
Added minimal information about rk3288, rk3328, rk3368 and rk3399 boards and usage. This would indeed updated further based on the requirements and updates.
Cc Kever Yang <[email protected]>Cc Matwey V. Kornilov <[email protected]>Signed-off-by Jagan Teki <[email protected]>
Thanks,
- Kever
Quoted 149 lines
--- doc/board/rockchip/index.rst | 10 +++ doc/board/rockchip/rockchip.rst | 130 ++++++++++++++++++++++++++++++++ 2 files changed, 140 insertions(+)create mode 100644
doc/board/rockchip/index.rstcreate mode 100644doc/board/rockchip/rockchip.rstdoc/board/rockchip/index.rst new file +10
-0@@ -0,0 +1,10 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. Copyright (C) 2019 Jagan Teki <[email protected]> + +Rockchip +======== + +.. toctree:: + :maxdepth: 2 + + rockchipdoc/board/rockchip/rockchip.rst new file +120
-0@@ -0,0 +1,130 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. Copyright (C) 2019 Jagan Teki <[email protected]> + +ROCKCHIP +======== + +About this +---------- + +This document describes the information about Rockchip supported boards +and it's usage steps. + +Rockchip boards +--------------- + +Rockchip is SoC solutions provider for tablets & PCs, streaming media +TV boxes, AI audio & vision, IoT hardware. + +A wide range of Rockchip SoCs with associated boardsare supported in +mainline U-Boot. + +List of mainline supported rockchip boards: + +* rk3288 + - Evb-RK3288 + - Firefly-RK3288 + - mqmaker MiQi + - Phytec RK3288 PCM-947 + - PopMetal-RK3288 + - Radxa Rock 2 Square + - Tinker-RK3288 + - Google Jerry + - Google Mickey + - Google Minnie + - Google Speedy + - Amarula Vyasa-RK3288 +* rk3328 + - Rockchip RK3328 EVB + - Pine64 Rock64 +* rk3368 + - GeekBox + - PX5 EVB + - Rockchip sheep board + - Theobroma Systems RK3368-uQ7 SoM +* rk3399 + - 96boards RK3399 Ficus + - 96boards Rock960 + - Firefly-RK3399 Board + - Firefly ROC-RK3399-PC Board + - FriendlyElec NanoPC-T4 + - FriendlyElec NanoPi M4 + - FriendlyARM NanoPi NEO4 + - Google Bob + - Khadas Edge + - Khadas Edge-Captain + - Khadas Edge-V + - Orange Pi RK3399 Board + - Pine64 RockPro64 + - Radxa ROCK Pi 4 + - Rockchip RK3399 Evaluation Board + - Theobroma Systems RK3399-Q7 SoM + +Building +-------- + +TF-A +^^^^ + +TF-A would require to build for ARM64 Rockchip SoCs platforms. + +To build TF-A:: + + git clone https://github.com/ARM-software/arm-trusted-firmware.git + cd arm-trusted-firmware + make realclean + make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 + +Specify the PLAT= with desired rockchip platform to build TF-A for. + +U-Boot +^^^^^^ + +To build rk3328 boards:: + + export BL31=/path/to/arm-trusted-firmware/to/bl31.elf + make evb-rk3328_defconfig + make + +To build rk3288 boards:: + + make evb-rk3288_defconfig + make + +To build rk3368 boards:: + + export BL31=/path/to/arm-trusted-firmware/to/bl31.elf + make evb-px5_defconfig + make + +To build rk3399 boards:: + + export BL31=/path/to/arm-trusted-firmware/to/bl31.elf + make evb-rk3399_defconfig + make + +Flashing +-------- + +SD Card +^^^^^^^ + +All rockchip platforms, except rk3128 (which doesn't use SPL) are now +supporting single boot image using binman and pad_cat. + +To write an image that boots from an SD card (assumed to be /dev/sda):: + + sudo dd if=u-boot-rockchip.bin of=/dev/sda seek=64 + sync + +TODO
doc/board/rockchip/rockchip.rst line 130
Quoted 10 lines
doc/board/rockchip/rockchip.rst new file +10
-0+---- + +- Add rockchip idbloader image building +- Add rockchip TPL image building +- Document SPI flash boot +- Describe steps for eMMC flashing +- Add missing SoC's with it boards list + +.. Jagan Teki <[email protected]> +.. Sat Jan 4 14:00:54 IST 2020
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
v6 cover rockchip: Add Binman support
In reply to Jagan TekiAdd Wadim in cc,
Hi Jagan,
After this patch set apply, the phycore-rk3288 board's SPL size is overflow:
arm: + phycore-rk3288
+Error: SPL image is too large (size 0x9000 than 0x8000) +Error: Bad parameters for image type
Maybe we need to enable the TPL for this board? @Wadim
Thanks,
- Kever
Quoted 57 lines · Jagan Teki
This is v6 set for Binman support in rockchip, [1] here is previous patchset.
This series add single boot image with binman for arm32 and
pad_catfor arm64 rockchip platforms both TPL + SPL and SPL-alone targets.Changes for v6:
- drop idbloader.img filename change patch
- updaterockchip.rstto include, rockchip TPL, SPI boot as TODO Changes for v5:
- collect kever review tag
- drop idbloader.img from clean target
Changes for v4:
- support all rockchip platforms
- add new patches for dtsi changes
- update documentation
- format proper commit message
- rebase on master
Changes for v3:
- rebase on master
- add binman for rk3288, rk3328, rk3368, rk3399
- added rst documentation for rockchip
Changes for v2:
- Add few clean target patches
- update bl31.elf env handling code, with logging
- support puma itb, via BL31 and PMUM0 env
- enableBUILD_TARGETforROCKCHIP_RK3399[1] https://patchwork.ozlabs.org/cover/1216263/
Any inputs?
Jagan.Jagan Teki (6):
Makefile: Add rockchip image type
Makefile: rockchip: Suffix platform type with tpl name
Makefile: rockchip: Support SPL-alone mkimage
arm: dts: rk3036: Addrk3036-u-boot.dtsi
rockchip: Add Single boot image (with binman,pad_cat)
doc: boards: Add rockchip documentationMakefile | 36 ++++++-- arch/arm/Kconfig | 1 + arch/arm/dts/rk3036-sdk-u-boot.dtsi | 2 + arch/arm/dts/rk3036-u-boot.dtsi | 6 ++ arch/arm/dts/rk3288-u-boot.dtsi | 2 + arch/arm/dts/rockchip-u-boot.dtsi | 21 +++++ doc/board/rockchip/index.rst | 10 +++ doc/board/rockchip/rockchip.rst | 130 ++++++++++++++++++++++++++++ include/configs/rockchip-common.h | 3 + 9 files changed, 206 insertions(+), 5 deletions(-)create mode 100644
arch/arm/dts/rk3036-u-boot.dtsicreate mode 100644arch/arm/dts/rockchip-u-boot.dtsicreate mode 100644doc/board/rockchip/index.rstcreate mode 100644doc/board/rockchip/rockchip.rst
v6 cover rockchip: Add Binman support
Hi,
Quoted 11 lines · Kever Yang
Add Wadim in cc,
Hi Jagan,
After this patch set apply, the phycore-rk3288 board's SPL size is overflow:
arm: + phycore-rk3288
(quoted diff) +2
-0+Error: SPL image is too large (size 0x9000 than 0x8000) +Error: Bad parameters for image type
Quoted 1 line
Maybe we need to enable the TPL for this board? @Wadim
I would like it to keep the SPL for the phyCORE board. In this thread
[1] I pointed out that you can drop the phycore_init() function that was sometimes blowing up the size of the phyCORE SPL image. So if there is no new other feature that increases the SPL size, we can just remove the code and the SPL should fit again. If you like I can take a look at this next week.
[1] https://lists.denx.de/pipermail/u-boot/2019-July/378112.html
Regards,
Wadim
Quoted 66 lines
Thanks,
- Kever
Quoted 57 lines · Jagan Teki
This is v6 set for Binman support in rockchip, [1] here is previous patchset.
This series add single boot image with binman for arm32 and
pad_catfor arm64 rockchip platforms both TPL + SPL and SPL-alone targets.Changes for v6:
- drop idbloader.img filename change patch
- updaterockchip.rstto include, rockchip TPL, SPI boot as TODO Changes for v5:
- collect kever review tag
- drop idbloader.img from clean target
Changes for v4:
- support all rockchip platforms
- add new patches for dtsi changes
- update documentation
- format proper commit message
- rebase on master
Changes for v3:
- rebase on master
- add binman for rk3288, rk3328, rk3368, rk3399
- added rst documentation for rockchip
Changes for v2:
- Add few clean target patches
- update bl31.elf env handling code, with logging
- support puma itb, via BL31 and PMUM0 env
- enableBUILD_TARGETforROCKCHIP_RK3399[1] https://patchwork.ozlabs.org/cover/1216263/
Any inputs?
Jagan.Jagan Teki (6):
Makefile: Add rockchip image type
Makefile: rockchip: Suffix platform type with tpl name
Makefile: rockchip: Support SPL-alone mkimage
arm: dts: rk3036: Addrk3036-u-boot.dtsi
rockchip: Add Single boot image (with binman,pad_cat)
doc: boards: Add rockchip documentationMakefile | 36 ++++++-- arch/arm/Kconfig | 1 +
arch/arm/dts/rk3036-sdk-u-boot.dtsi| 2 + arch/arm/dts/rk3036-u-boot.dtsi | 6 ++ arch/arm/dts/rk3288-u-boot.dtsi | 2 + arch/arm/dts/rockchip-u-boot.dtsi | 21 +++++ doc/board/rockchip/index.rst | 10 +++ doc/board/rockchip/rockchip.rst | 130 ++++++++++++++++++++++++++++ include/configs/rockchip-common.h | 3 +9 files changed, 206 insertions(+), 5 deletions(-)create mode 100644
arch/arm/dts/rk3036-u-boot.dtsicreate mode 100644arch/arm/dts/rockchip-u-boot.dtsicreate mode 100644doc/board/rockchip/index.rstcreate mode 100644doc/board/rockchip/rockchip.rst
v6 cover rockchip: Add Binman support
Quoted 15 lines · Wadim Egorov
Hi,
Quoted 11 lines · Kever Yang
Add Wadim in cc,
Hi Jagan,
After this patch set apply, the phycore-rk3288 board's SPL size is overflow:
arm: + phycore-rk3288(quoted diff) +2
-0+Error: SPL image is too large (size 0x9000 than 0x8000) +Error: Bad parameters for image type
Quoted 8 lines
Quoted 1 line
Maybe we need to enable the TPL for this board? @Wadim
I would like it to keep the SPL for the phyCORE board. In this thread
[1] I pointed out that you can drop thephycore_init()function that was sometimes blowing up the size of the phyCORE SPL image. So if there is no new other feature that increases the SPL size, we can just remove the code and the SPL should fit again. If you like I can take a look at this next week.
If not, maybe we can disable BINMAN for this board? I'm sure it can revert since there would be a need to move TPL in future.
v6 cover rockchip: Add Binman support
In reply to Wadim EgorovQuoted 15 lines · Wadim Egorov
Hi,
Quoted 11 lines · Kever Yang
Add Wadim in cc,
Hi Jagan,
After this patch set apply, the phycore-rk3288 board's SPL size is overflow:
arm: + phycore-rk3288(quoted diff) +2
-0+Error: SPL image is too large (size 0x9000 than 0x8000) +Error: Bad parameters for image type
Quoted 8 lines
Quoted 1 line
Maybe we need to enable the TPL for this board? @Wadim
I would like it to keep the SPL for the phyCORE board. In this thread
[1] I pointed out that you can drop thephycore_init()function that was sometimes blowing up the size of the phyCORE SPL image. So if there is no new other feature that increases the SPL size, we can just remove the code and the SPL should fit again. If you like I can take a look at this next week.
This won't help much, but one possibility is to use SPL_OF_PLATDATA (I've verified). Can you help us to try as quickly as possible? or do you want us to try?
Jagan.
v6 cover rockchip: Add Binman support
Hi Jagan,
Quoted 22 lines · Jagan Teki
Quoted 14 lines · Wadim Egorov
Hi,
Quoted 11 lines · Kever Yang
Add Wadim in cc,
Hi Jagan,
After this patch set apply, the phycore-rk3288 board's SPL size is overflow:
arm: + phycore-rk3288(quoted diff) +2
-0+Error: SPL image is too large (size 0x9000 than 0x8000) +Error: Bad parameters for image typeQuoted 7 lines
Quoted 1 line
Maybe we need to enable the TPL for this board? @Wadim
I would like it to keep the SPL for the phyCORE board. In this thread
[1] I pointed out that you can drop thephycore_init()function that was sometimes blowing up the size of the phyCORE SPL image. So if there is no new other feature that increases the SPL size, we can just remove the code and the SPL should fit again. If you like I can take a look at this next week.
Quoted 3 lines
This won't help much, but one possibility is to use
SPL_OF_PLATDATA(I've verified). Can you help us to try as quickly as possible? or do you want us to try?
Or we can simply disable CONFIG_SPL_I2C_SUPPORT and CONFIG_SPL_POWER_SUPPORT in the phycore-rk3288_defconfig. What do you want me to do now? Testing your patches with SPL_OF_PLATDATA=y on our board? If so, I can help you next week with testing.
v6 cover rockchip: Add Binman support
Quoted 26 lines · Wadim Egorov
Hi Jagan,
Quoted 22 lines · Jagan Teki
Quoted 21 lines · Wadim Egorov
Hi,
Quoted 11 lines · Kever Yang
Add Wadim in cc,
Hi Jagan,
After this patch set apply, the phycore-rk3288 board's SPL size is overflow:
arm: + phycore-rk3288(quoted diff) +2
-0+Error: SPL image is too large (size 0x9000 than 0x8000) +Error: Bad parameters for image typeQuoted 1 line
Maybe we need to enable the TPL for this board? @Wadim
I would like it to keep the SPL for the phyCORE board. In this thread
[1] I pointed out that you can drop thephycore_init()function that was sometimes blowing up the size of the phyCORE SPL image. So if there is no new other feature that increases the SPL size, we can just remove the code and the SPL should fit again. If you like I can take a look at this next week.
Quoted 6 lines
Quoted 3 lines
This won't help much, but one possibility is to use
SPL_OF_PLATDATA(I've verified). Can you help us to try as quickly as possible? or do you want us to try?Or we can simply disable
CONFIG_SPL_I2C_SUPPORTandCONFIG_SPL_POWER_SUPPORTin the phycore-rk3288_defconfig.
This seems fixed, sent the patches please test the same, thanks!
v6 cover rockchip: Add Binman support
In reply to Kever YangHi,
Quoted 11 lines · Kever Yang
Add Wadim in cc,
Hi Jagan,
After this patch set apply, the phycore-rk3288 board's SPL size is overflow:
arm: + phycore-rk3288(quoted diff) +2
-0+Error: SPL image is too large (size 0x9000 than 0x8000) +Error: Bad parameters for image type
Quoted 1 line
Maybe we need to enable the TPL for this board? @Wadim
We should look at why it is too large. Enabling BINMAN should not increase the code size of SPL, so perhaps there is a bug?
Regards,
Simon