rtc: tps6586x: Use IRQ_NOAUTOEN flag
Subsystems (2)
PATCH 1/1 rtc: tps6586x: Use IRQ_NOAUTOEN flag
The IRQ_NOAUTOEN flag tells interrupt core that interrupt shall not be auto-enabled at the time of requesting interrupt. This is a minor clean-up change that doesn't fix any problems.
Signed-off-by Dmitry Osipenko <[email protected]>
--- drivers/rtc/rtc-tps6586x.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/rtc/rtc-tps6586x.c +3 -1
@@ -23,6 +23,7 @@#include <linux/device.h> #include <linux/err.h> #include <linux/init.h> +#include <linux/irq.h> #include <linux/kernel.h> #include <linux/mfd/tps6586x.h> #include <linux/module.h>
@@ -267,6 +268,8 @@ static int tps6586x_rtc_probe(struct platform_device *pdev) rtc->rtc->start_secs =mktime64 (2009 ,1 ,1 ,0 ,0 ,0 ); rtc->rtc->set_start_time = true; +irq_set_status_flags (rtc->irq,IRQ_NOAUTOEN ); + ret = devm_request_threaded_irq(&pdev->dev, rtc->irq, NULL, tps6586x_rtc_irq, IRQF_ONESHOT,
@@ -276,7 +279,6 @@ static int tps6586x_rtc_probe(struct platform_device *pdev) rtc->irq, ret); goto fail_rtc_register; } -disable_irq (rtc->irq); ret =rtc_register_device (rtc->rtc);if (ret)
Signature · 1 line
2.24.0
Quoted 9 lines · Dmitry Osipenko
The
IRQ_NOAUTOENflag tells interrupt core that interrupt shall not be auto-enabled at the time of requesting interrupt. This is a minor clean-up change that doesn't fix any problems.Signed-off-by Dmitry Osipenko <[email protected]>--- drivers/rtc/rtc-tps6586x.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
Applied, thanks.
Signature · 3 lines
Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com