Skip to contentSkip to conversation

mips: cacheinfo: report shared CPU map

PATCH New Sasha Levin 1 participant 10 messages Jan 10, 2020

Subsystems (7)
lore
Share & tools
lore
author maintainer
#7 lore raw

PATCH 9/11 hexagon: parenthesize registers in asm predicates

In reply to Sasha Levin

From: Nick Desaulniers <[email protected]>

[ Upstream commit 780a0cfda9006a9a22d6473c2d4c527f5c68eb2e ]

Hexagon requires that register predicates in assembly be parenthesized.

Cc Lee Jones <[email protected]>
Cc Andy Shevchenko <[email protected]>
Cc Tuowen Zhao <[email protected]>
Cc Mika Westerberg <[email protected]>
Cc Luis Chamberlain <[email protected]>
Cc Greg Kroah-Hartman <[email protected]>
Cc Alexios Zavras <[email protected]>
Cc Allison Randal <[email protected]>
Cc Will Deacon <[email protected]>
Cc Richard Fontana <[email protected]>
Cc Thomas Gleixner <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Boqun Feng <[email protected]>
Cc Ingo Molnar <[email protected]>
Cc Geert Uytterhoeven <[email protected]>
---
 arch/hexagon/include/asm/atomic.h   |  8 ++++----
 arch/hexagon/include/asm/bitops.h   |  8 ++++----
 arch/hexagon/include/asm/cmpxchg.h  |  2 +-
 arch/hexagon/include/asm/futex.h    |  6 +++---
 arch/hexagon/include/asm/spinlock.h | 20 ++++++++++----------
 arch/hexagon/kernel/vm_entry.S      |  2 +-
 6 files changed, 23 insertions(+), 23 deletions(-)
arch/hexagon/include/asm/atomic.h +4 -4
index 311b9894ccc8..15cca7f1fded 100644
@@ -105,7 +105,7 @@ static inline void atomic_##op(int i, atomic_t *v)			\
 		"1:	%0 = memw_locked(%1);\n"			\
 		"	%0 = "#op "(%0,%2);\n"				\
 		"	memw_locked(%1,P3)=%0;\n"			\
-		"	if !P3 jump 1b;\n"				\
+		"	if (!P3) jump 1b;\n"				\
 		: "=&r" (output)					\
 		: "r" (&v->counter), "r" (i)				\
 		: "memory", "p3"					\
@@ -121,7 +121,7 @@ static inline int atomic_##op##_return(int i, atomic_t *v)		\
 		"1:	%0 = memw_locked(%1);\n"			\
 		"	%0 = "#op "(%0,%2);\n"				\
 		"	memw_locked(%1,P3)=%0;\n"			\
-		"	if !P3 jump 1b;\n"				\
+		"	if (!P3) jump 1b;\n"				\
 		: "=&r" (output)					\
 		: "r" (&v->counter), "r" (i)				\
 		: "memory", "p3"					\
@@ -138,7 +138,7 @@ static inline int atomic_fetch_##op(int i, atomic_t *v)			\
 		"1:	%0 = memw_locked(%2);\n"			\
 		"	%1 = "#op "(%0,%3);\n"				\
 		"	memw_locked(%2,P3)=%1;\n"			\
-		"	if !P3 jump 1b;\n"				\
+		"	if (!P3) jump 1b;\n"				\
 		: "=&r" (output), "=&r" (val)				\
 		: "r" (&v->counter), "r" (i)				\
 		: "memory", "p3"					\
@@ -187,7 +187,7 @@ static inline int atomic_fetch_add_unless(atomic_t *v, int a, int u)
 		"	}"
 		"	memw_locked(%2, p3) = %1;"
 		"	{"
-		"		if !p3 jump 1b;"
+		"		if (!p3) jump 1b;"
 		"	}"
 		"2:"
 		: "=&r" (__oldval), "=&r" (tmp)
arch/hexagon/include/asm/bitops.h +4 -4
index 2691a1857d20..634306cda006 100644
@@ -52,7 +52,7 @@ static inline int test_and_clear_bit(int nr, volatile void *addr)
 	"1:	R12 = memw_locked(R10);\n"
 	"	{ P0 = tstbit(R12,R11); R12 = clrbit(R12,R11); }\n"
 	"	memw_locked(R10,P1) = R12;\n"
-	"	{if !P1 jump 1b; %0 = mux(P0,#1,#0);}\n"
+	"	{if (!P1) jump 1b; %0 = mux(P0,#1,#0);}\n"
 	: "=&r" (oldval)
 	: "r" (addr), "r" (nr)
 	: "r10", "r11", "r12", "p0", "p1", "memory"
@@ -76,7 +76,7 @@ static inline int test_and_set_bit(int nr, volatile void *addr)
 	"1:	R12 = memw_locked(R10);\n"
 	"	{ P0 = tstbit(R12,R11); R12 = setbit(R12,R11); }\n"
 	"	memw_locked(R10,P1) = R12;\n"
-	"	{if !P1 jump 1b; %0 = mux(P0,#1,#0);}\n"
+	"	{if (!P1) jump 1b; %0 = mux(P0,#1,#0);}\n"
 	: "=&r" (oldval)
 	: "r" (addr), "r" (nr)
 	: "r10", "r11", "r12", "p0", "p1", "memory"
@@ -102,7 +102,7 @@ static inline int test_and_change_bit(int nr, volatile void *addr)
 	"1:	R12 = memw_locked(R10);\n"
 	"	{ P0 = tstbit(R12,R11); R12 = togglebit(R12,R11); }\n"
 	"	memw_locked(R10,P1) = R12;\n"
-	"	{if !P1 jump 1b; %0 = mux(P0,#1,#0);}\n"
+	"	{if (!P1) jump 1b; %0 = mux(P0,#1,#0);}\n"
 	: "=&r" (oldval)
 	: "r" (addr), "r" (nr)
 	: "r10", "r11", "r12", "p0", "p1", "memory"
@@ -237,7 +237,7 @@ static inline int ffs(int x)
 	int r;
 
 	asm("{ P0 = cmp.eq(%1,#0); %0 = ct0(%1);}\n"
-		"{ if P0 %0 = #0; if !P0 %0 = add(%0,#1);}\n"
+		"{ if (P0) %0 = #0; if (!P0) %0 = add(%0,#1);}\n"
 		: "=&r" (r)
 		: "r" (x)
 		: "p0");
arch/hexagon/include/asm/cmpxchg.h +1 -1
index a6e34e2acbba..db258424059f 100644
@@ -44,7 +44,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
 	__asm__ __volatile__ (
 	"1:	%0 = memw_locked(%1);\n"    /*  load into retval */
 	"	memw_locked(%1,P0) = %2;\n" /*  store into memory */
-	"	if !P0 jump 1b;\n"
+	"	if (!P0) jump 1b;\n"
 	: "=&r" (retval)
 	: "r" (ptr), "r" (x)
 	: "memory", "p0"
arch/hexagon/include/asm/futex.h +3 -3
index c889f5993ecd..e8e5e47afb37 100644
@@ -16,7 +16,7 @@
 	    /* For example: %1 = %4 */ \
 	    insn \
 	"2: memw_locked(%3,p2) = %1;\n" \
-	"   if !p2 jump 1b;\n" \
+	"   if (!p2) jump 1b;\n" \
 	"   %1 = #0;\n" \
 	"3:\n" \
 	".section .fixup,\"ax\"\n" \
@@ -84,10 +84,10 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, u32 oldval,
 	"1: %1 = memw_locked(%3)\n"
 	"   {\n"
 	"      p2 = cmp.eq(%1,%4)\n"
-	"      if !p2.new jump:NT 3f\n"
+	"      if (!p2.new) jump:NT 3f\n"
 	"   }\n"
 	"2: memw_locked(%3,p2) = %5\n"
-	"   if !p2 jump 1b\n"
+	"   if (!p2) jump 1b\n"
 	"3:\n"
 	".section .fixup,\"ax\"\n"
 	"4: %0 = #%6\n"
arch/hexagon/include/asm/spinlock.h +10 -10
index 48020863f53a..e090f6a151c2 100644
@@ -44,9 +44,9 @@ static inline void arch_read_lock(arch_rwlock_t *lock)
 	__asm__ __volatile__(
 		"1:	R6 = memw_locked(%0);\n"
 		"	{ P3 = cmp.ge(R6,#0); R6 = add(R6,#1);}\n"
-		"	{ if !P3 jump 1b; }\n"
+		"	{ if (!P3) jump 1b; }\n"
 		"	memw_locked(%0,P3) = R6;\n"
-		"	{ if !P3 jump 1b; }\n"
+		"	{ if (!P3) jump 1b; }\n"
 		:
 		: "r" (&lock->lock)
 		: "memory", "r6", "p3"
@@ -60,7 +60,7 @@ static inline void arch_read_unlock(arch_rwlock_t *lock)
 		"1:	R6 = memw_locked(%0);\n"
 		"	R6 = add(R6,#-1);\n"
 		"	memw_locked(%0,P3) = R6\n"
-		"	if !P3 jump 1b;\n"
+		"	if (!P3) jump 1b;\n"
 		:
 		: "r" (&lock->lock)
 		: "memory", "r6", "p3"
@@ -75,7 +75,7 @@ static inline int arch_read_trylock(arch_rwlock_t *lock)
 	__asm__ __volatile__(
 		"	R6 = memw_locked(%1);\n"
 		"	{ %0 = #0; P3 = cmp.ge(R6,#0); R6 = add(R6,#1);}\n"
-		"	{ if !P3 jump 1f; }\n"
+		"	{ if (!P3) jump 1f; }\n"
 		"	memw_locked(%1,P3) = R6;\n"
 		"	{ %0 = P3 }\n"
 		"1:\n"
@@ -92,9 +92,9 @@ static inline void arch_write_lock(arch_rwlock_t *lock)
 	__asm__ __volatile__(
 		"1:	R6 = memw_locked(%0)\n"
 		"	{ P3 = cmp.eq(R6,#0);  R6 = #-1;}\n"
-		"	{ if !P3 jump 1b; }\n"
+		"	{ if (!P3) jump 1b; }\n"
 		"	memw_locked(%0,P3) = R6;\n"
-		"	{ if !P3 jump 1b; }\n"
+		"	{ if (!P3) jump 1b; }\n"
 		:
 		: "r" (&lock->lock)
 		: "memory", "r6", "p3"
@@ -108,7 +108,7 @@ static inline int arch_write_trylock(arch_rwlock_t *lock)
 	__asm__ __volatile__(
 		"	R6 = memw_locked(%1)\n"
 		"	{ %0 = #0; P3 = cmp.eq(R6,#0);  R6 = #-1;}\n"
-		"	{ if !P3 jump 1f; }\n"
+		"	{ if (!P3) jump 1f; }\n"
 		"	memw_locked(%1,P3) = R6;\n"
 		"	%0 = P3;\n"
 		"1:\n"
@@ -131,9 +131,9 @@ static inline void arch_spin_lock(arch_spinlock_t *lock)
 	__asm__ __volatile__(
 		"1:	R6 = memw_locked(%0);\n"
 		"	P3 = cmp.eq(R6,#0);\n"
-		"	{ if !P3 jump 1b; R6 = #1; }\n"
+		"	{ if (!P3) jump 1b; R6 = #1; }\n"
 		"	memw_locked(%0,P3) = R6;\n"
-		"	{ if !P3 jump 1b; }\n"
+		"	{ if (!P3) jump 1b; }\n"
 		:
 		: "r" (&lock->lock)
 		: "memory", "r6", "p3"
@@ -153,7 +153,7 @@ static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock)
 	__asm__ __volatile__(
 		"	R6 = memw_locked(%1);\n"
 		"	P3 = cmp.eq(R6,#0);\n"
-		"	{ if !P3 jump 1f; R6 = #1; %0 = #0; }\n"
+		"	{ if (!P3) jump 1f; R6 = #1; %0 = #0; }\n"
 		"	memw_locked(%1,P3) = R6;\n"
 		"	%0 = P3;\n"
 		"1:\n"
arch/hexagon/kernel/vm_entry.S +1 -1
index 67c6ccc14770..9f4a73ff7203 100644
@@ -382,7 +382,7 @@ ret_from_fork:
 		R26.L = #LO(do_work_pending);
 		R0 = #VM_INT_DISABLE;
 	}
-	if P0 jump check_work_pending
+	if (P0) jump check_work_pending
 	{
 		R0 = R25;
 		callr R24
Signature · 1 line
2.20.1
author maintainer
#8 lore raw

PATCH 10/11 hexagon: work around compiler crash

In reply to Sasha Levin

From: Nick Desaulniers <[email protected]>

[ Upstream commit 63e80314ab7cf4783526d2e44ee57a90514911c9 ]

Clang cannot translate the string "r30" into a valid register yet.

---
 arch/hexagon/kernel/stacktrace.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
arch/hexagon/kernel/stacktrace.c +1 -3
index 41866a06adf7..ec4ef682923d 100644
@@ -24,8 +24,6 @@
 #include <linux/thread_info.h>
 #include <linux/module.h>
 
-register unsigned long current_frame_pointer asm("r30");
-
 struct stackframe {
 	unsigned long fp;
 	unsigned long rets;
@@ -43,7 +41,7 @@ void save_stack_trace(struct stack_trace *trace)
 
 	low = (unsigned long)task_stack_page(current);
 	high = low + THREAD_SIZE;
-	fp = current_frame_pointer;
+	fp = (unsigned long)__builtin_frame_address(0);
 
 	while (fp >= low && fp <= (high - sizeof(*frame))) {
 		frame = (struct stackframe *)fp;
Signature · 1 line
2.20.1
author maintainer
#1 lore raw

PATCH 2/11 MIPS: Prevent link failure with kcov instrumentation

In reply to Sasha Levin

From: Jouni Hogander <[email protected]>

[ Upstream commit a4a3893114a41e365274d5fab5d9ff5acc235ff0 ]

__sanitizer_cov_trace_pc() is not linked in and causing link failure if KCOV_INSTRUMENT is enabled. Fix this by disabling instrumentation for compressed image.

---
 arch/mips/boot/compressed/Makefile | 3 +++
 1 file changed, 3 insertions(+)
arch/mips/boot/compressed/Makefile +3 -0
index 172801ed35b8..d859f079b771 100644
@@ -29,6 +29,9 @@ KBUILD_AFLAGS := $(KBUILD_AFLAGS) -D__ASSEMBLY__ \
 	-DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \
 	-DKERNEL_ENTRY=$(VMLINUX_ENTRY_ADDRESS)
 
+# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
+KCOV_INSTRUMENT		:= n
+
 # decompressor objects (linked with vmlinuz)
 vmlinuzobjs-y := $(obj)/head.o $(obj)/decompress.o $(obj)/string.o
 
Signature · 1 line
2.20.1

Sasha Levin

author maintainer
#0 lore raw

PATCH 1/11 mips: cacheinfo: report shared CPU map

From: Vladimir Kondratiev <[email protected]>

[ Upstream commit 3b1313eb32c499d46dc4c3e896d19d9564c879c4 ]

Report L1 caches as shared per core; L2 - per cluster.

This fixes "perf" that went crazy if shared_cpu_map attribute not reported on sysfs, in form of

/sys/devices/system/cpu/cpu*/cache/index*/shared_cpu_list /sys/devices/system/cpu/cpu*/cache/index*/shared_cpu_map

---
 arch/mips/kernel/cacheinfo.c | 27 ++++++++++++++++++++++++++-
 1 file changed, 26 insertions(+), 1 deletion(-)
arch/mips/kernel/cacheinfo.c +26 -1
index 428ef2189203..3ea95568ece4 100644
@@ -61,6 +61,25 @@ static int __init_cache_level(unsigned int cpu)
 	return 0;
 }
 
+static void fill_cpumask_siblings(int cpu, cpumask_t *cpu_map)
+{
+	int cpu1;
+
+	for_each_possible_cpu(cpu1)
+		if (cpus_are_siblings(cpu, cpu1))
+			cpumask_set_cpu(cpu1, cpu_map);
+}
+
+static void fill_cpumask_cluster(int cpu, cpumask_t *cpu_map)
+{
+	int cpu1;
+	int cluster = cpu_cluster(&cpu_data[cpu]);
+
+	for_each_possible_cpu(cpu1)
+		if (cpu_cluster(&cpu_data[cpu1]) == cluster)
+			cpumask_set_cpu(cpu1, cpu_map);
+}
+
 static int __populate_cache_leaves(unsigned int cpu)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;
@@ -68,14 +87,20 @@ static int __populate_cache_leaves(unsigned int cpu)
 	struct cacheinfo *this_leaf = this_cpu_ci->info_list;
 
 	if (c->icache.waysize) {
+		/* L1 caches are per core */
+		fill_cpumask_siblings(cpu, &this_leaf->shared_cpu_map);
 		populate_cache(dcache, this_leaf, 1, CACHE_TYPE_DATA);
+		fill_cpumask_siblings(cpu, &this_leaf->shared_cpu_map);
 		populate_cache(icache, this_leaf, 1, CACHE_TYPE_INST);
 	} else {
 		populate_cache(dcache, this_leaf, 1, CACHE_TYPE_UNIFIED);
 	}
 
-	if (c->scache.waysize)
+	if (c->scache.waysize) {
+		/* L2 cache is per cluster */
+		fill_cpumask_cluster(cpu, &this_leaf->shared_cpu_map);
 		populate_cache(scache, this_leaf, 2, CACHE_TYPE_UNIFIED);
+	}
 
 	if (c->tcache.waysize)
 		populate_cache(tcache, this_leaf, 3, CACHE_TYPE_UNIFIED);
Signature · 1 line
2.20.1
author maintainer
#3 lore raw

PATCH 5/11 s390/qeth: fix false reporting of VNIC CHAR config failure

From: Alexandra Winter <[email protected]>

[ Upstream commit 68c57bfd52836e31bff33e5e1fc64029749d2c35 ]

Symptom: Error message "Configuring the VNIC characteristics failed" in dmesg whenever an OSA interface on z15 is set online.

The VNIC characteristics get re-programmed when setting a L2 device online. This follows the selected 'wanted' characteristics - with the exception that the INVISIBLE characteristic unconditionally gets switched off.

For devices that don't support INVISIBLE (ie. OSA), the resulting IO failure raises a noisy error message
("Configuring the VNIC characteristics failed").
For IQD, INVISIBLE is off by default anyways.

So don't unnecessarily special-case the INVISIBLE characteristic, and thereby suppress the misleading error message on OSA devices.

Fixes caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support")
---
 drivers/s390/net/qeth_l2_main.c | 1 -
 1 file changed, 1 deletion(-)
drivers/s390/net/qeth_l2_main.c +0 -1
index 95669d47c389..66bc6f1ffd34 100644
@@ -2367,7 +2367,6 @@ static void qeth_l2_vnicc_init(struct qeth_card *card)
 	error = qeth_l2_vnicc_recover_timeout(card, QETH_VNICC_LEARNING,
 					      timeout);
 	chars_tmp = card->options.vnicc.wanted_chars ^ QETH_VNICC_DEFAULT;
-	chars_tmp |= QETH_VNICC_BRIDGE_INVISIBLE;
 	chars_len = sizeof(card->options.vnicc.wanted_chars) * BITS_PER_BYTE;
 	for_each_set_bit(i, &chars_tmp, chars_len) {
 		vnicc = BIT(i);
Signature · 1 line
2.20.1
author maintainer
#4 lore raw

PATCH 6/11 s390/qeth: Fix vnicc_is_in_use if rx_bcast not set

In reply to Sasha Levin

From: Alexandra Winter <[email protected]>

[ Upstream commit e8a66d800471e2df7f0b484e2e46898b21d1fa82 ]

Symptom: After vnicc/rx_bcast has been manually set to 0,
bridge_* sysfs parameters can still be set or written.
Only occurs on HiperSockets, as OSA doesn't support changing rx_bcast.

Vnic characteristics and bridgeport settings are mutually exclusive. rx_bcast defaults to 1, so manually setting it to 0 should disable bridge_* parameters.

Instead it makes sense here to check the supported mask. If the card does not support vnicc at all, bridge commands are always allowed.

Fixes caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support")
---
 drivers/s390/net/qeth_l2_main.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/s390/net/qeth_l2_main.c +1 -2
index 66bc6f1ffd34..c238b190b3c9 100644
@@ -2285,8 +2285,7 @@ int qeth_l2_vnicc_get_timeout(struct qeth_card *card, u32 *timeout)
 /* check if VNICC is currently enabled */
 bool qeth_l2_vnicc_is_in_use(struct qeth_card *card)
 {
-	/* if everything is turned off, VNICC is not active */
-	if (!card->options.vnicc.cur_chars)
+	if (!card->options.vnicc.sup_chars)
 		return false;
 	/* default values are only OK if rx_bcast was not enabled by user
 	 * or the card is offline.
Signature · 1 line
2.20.1
author maintainer
#2 lore raw

PATCH 4/11 dmaengine: k3dma: Avoid null pointer traversal

In reply to Sasha Levin

From: John Stultz <[email protected]>

[ Upstream commit 2f42e05b942fe2fbfb9bbc6e34e1dd8c3ce4f3a4 ]

In some cases we seem to submit two transactions in a row, which causes us to lose track of the first. If we then cancel the request, we may still get an interrupt, which traverses a null ds_run value.

So try to avoid starting a new transaction if the ds_run value is set.

While this patch avoids the null pointer crash, I've had some reports of the k3dma driver still getting confused, which suggests the ds_run/ds_done value handling still isn't quite right. However, I've not run into an issue recently with it so I think this patch is worth pushing upstream to avoid the crash.

---
 drivers/dma/k3dma.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
drivers/dma/k3dma.c +9 -3
index 6bfa217ed6d0..ba3c3791f9dc 100644
@@ -222,9 +222,11 @@ static irqreturn_t k3_dma_int_handler(int irq, void *dev_id)
 			c = p->vchan;
 			if (c && (tc1 & BIT(i))) {
 				spin_lock_irqsave(&c->vc.lock, flags);
-				vchan_cookie_complete(&p->ds_run->vd);
-				p->ds_done = p->ds_run;
-				p->ds_run = NULL;
+				if (p->ds_run != NULL) {
+					vchan_cookie_complete(&p->ds_run->vd);
+					p->ds_done = p->ds_run;
+					p->ds_run = NULL;
+				}
 				spin_unlock_irqrestore(&c->vc.lock, flags);
 			}
 			if (c && (tc2 & BIT(i))) {
@@ -264,6 +266,10 @@ static int k3_dma_start_txd(struct k3_dma_chan *c)
 	if (BIT(c->phy->idx) & k3_dma_get_chan_stat(d))
 		return -EAGAIN;
 
+	/* Avoid losing track of  ds_run if a transaction is in flight */
+	if (c->phy->ds_run)
+		return -EAGAIN;
+
 	if (vd) {
 		struct k3_dma_desc_sw *ds =
 			container_of(vd, struct k3_dma_desc_sw, vd);
Signature · 1 line
2.20.1
author maintainer
#5 lore raw

PATCH 7/11 hsr: reset network header when supervision frame is created

In reply to Sasha Levin

From: Taehee Yoo <[email protected]>

[ Upstream commit 3ed0a1d563903bdb4b4c36c58c4d9c1bcb23a6e6 ]

The supervision frame is L2 frame.
When supervision frame is created, hsr module doesn't set network header. If tap routine is enabled, dev_queue_xmit_nit() is called and it checks network_header. If network_header pointer wasn't set(or invalid), it resets network_header and warns.
In order to avoid unnecessary warning message, resetting network_header is needed.

Test commands:
ip netns add nst
ip link add veth0 type veth peer name veth1
ip link add veth2 type veth peer name veth3
ip link set veth1 netns nst
ip link set veth3 netns nst
ip link set veth0 up
ip link set veth2 up
ip link add hsr0 type hsr slave1 veth0 slave2 veth2
ip a a 192.168.100.1/24 dev hsr0
ip link set hsr0 up
ip netns exec nst ip link set veth1 up
ip netns exec nst ip link set veth3 up
ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3 ip netns exec nst ip a a 192.168.100.2/24 dev hsr1
ip netns exec nst ip link set hsr1 up
tcpdump -nei veth0

Splat looks like:

[  175.852292][    C3] protocol 88fb is buggy, dev veth0
Fixes f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
---
 net/hsr/hsr_device.c | 2 ++
 1 file changed, 2 insertions(+)
net/hsr/hsr_device.c +2 -0
index a97bf326b231..c27577af32e3 100644
@@ -281,6 +281,8 @@ static void send_hsr_supervision_frame(struct hsr_port *master,
 			    skb->dev->dev_addr, skb->len) <= 0)
 		goto out;
 	skb_reset_mac_header(skb);
+	skb_reset_network_header(skb);
+	skb_reset_transport_header(skb);
 
 	if (hsrVer > 0) {
 		hsr_tag = skb_put(skb, sizeof(struct hsr_tag));
Signature · 1 line
2.20.1
author maintainer
#6 lore raw

PATCH 8/11 ioat: ioat_alloc_ring() failure handling.

In reply to Sasha Levin

From: "[email protected]" <[email protected]>

[ Upstream commit b0b5ce1010ffc50015eaec72b0028aaae3f526bb ]

If dma_alloc_coherent() returns NULL in ioat_alloc_ring(), ring allocation must not proceed.

Until now, if the first call to dma_alloc_coherent() in ioat_alloc_ring() returned NULL, the processing could proceed, failing with NULL-pointer dereferencing further down the line.

---
 drivers/dma/ioat/dma.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/dma/ioat/dma.c +2 -1
index 23fb2fa04000..b94cece58b98 100644
@@ -388,10 +388,11 @@ ioat_alloc_ring(struct dma_chan *c, int order, gfp_t flags)
 
 		descs->virt = dma_alloc_coherent(to_dev(ioat_chan),
 						 SZ_2M, &descs->hw, flags);
-		if (!descs->virt && (i > 0)) {
+		if (!descs->virt) {
 			int idx;
 
 			for (idx = 0; idx < i; idx++) {
+				descs = &ioat_chan->descs[idx];
 				dma_free_coherent(to_dev(ioat_chan), SZ_2M,
 						  descs->virt, descs->hw);
 				descs->virt = NULL;
Signature · 1 line
2.20.1
author maintainer
#9 lore raw

PATCH 11/11 ocfs2: call journal flush to mark journal as empty after journal recovery when mount

In reply to Sasha Levin

From: Kai Li <[email protected]>

[ Upstream commit 397eac17f86f404f5ba31d8c3e39ec3124b39fd3 ]

If journal is dirty when mount, it will be replayed but jbd2 sb log tail cannot be updated to mark a new start because journal->j_flag has already been set with JBD2_ABORT first in journal_init_common.

When a new transaction is committed, it will be recored in block 1 first(journal->j_tail is set to 1 in journal_reset). If emergency restart happens again before journal super block is updated unfortunately, the new recorded trans will not be replayed in the next mount.

The following steps describe this procedure in detail.
1. mount and touch some files
2. these transactions are committed to journal area but not checkpointed
3. emergency restart
4. mount again and its journals are replayed
5. journal super block's first s_start is 1, but its s_seq is not updated
6. touch a new file and its trans is committed but not checkpointed
7. emergency restart again
8. mount and journal is dirty, but trans committed in 6 will not be replayed.

This exception happens easily when this lun is used by only one node. If it is used by multi-nodes, other node will replay its journal and its journal super block will be updated after recovery like what this patch does.

ocfs2_recover_node->ocfs2_replay_journal.

The following jbd2 journal can be generated by touching a new file after journal is replayed, and seq 15 is the first valid commit, but first seq is 13 in journal super block.

logdump:
Block 0: Journal Superblock
Seq: 0 Type: 4 (JBD2_SUPERBLOCK_V2)
Blocksize: 4096 Total Blocks: 32768 First Block: 1
First Commit ID: 13 Start Log Blknum: 1
Error: 0
Feature Compat: 0
Feature Incompat: 2 block64
Feature RO compat: 0
Journal UUID: 4ED3822C54294467A4F8E87D2BA4BC36
FS Share Cnt: 1 Dynamic Superblk Blknum: 0
Per Txn Block Limit Journal: 0 Data: 0

Block 1: Journal Commit Block
Seq: 14 Type: 2 (JBD2_COMMIT_BLOCK)

Block 2: Journal Descriptor
Seq: 15 Type: 1 (JBD2_DESCRIPTOR_BLOCK)
No. Blocknum Flags
0. 587 none
UUID: 00000000000000000000000000000000

   1. 8257792         JBD2_FLAG_SAME_UUID
   2. 619             JBD2_FLAG_SAME_UUID
   3. 24772864        JBD2_FLAG_SAME_UUID
   4. 8257802         JBD2_FLAG_SAME_UUID
   5. 513             JBD2_FLAG_SAME_UUID JBD2_FLAG_LAST_TAG
  ...
  Block 7: Inode
  Inode: 8257802   Mode: 0640   Generation: 57157641 (0x3682809)
  FS Generation: 2839773110 (0xa9437fb6)
  CRC32: 00000000   ECC: 0000
  Type: Regular   Attr: 0x0   Flags: Valid
  Dynamic Features: (0x1) InlineData
  User: 0 (root)   Group: 0 (root)   Size: 7
  Links: 1   Clusters: 0
  ctime: 0x5de5d870 0x11104c61 -- Tue Dec  3 11:37:20.286280801 2019
  atime: 0x5de5d870 0x113181a1 -- Tue Dec  3 11:37:20.288457121 2019
  mtime: 0x5de5d870 0x11104c61 -- Tue Dec  3 11:37:20.286280801 2019

dtime: 0x0 -- Thu Jan 1 08:00:00 1970
...
Block 9: Journal Commit Block
Seq: 15 Type: 2 (JBD2_COMMIT_BLOCK)

The following is journal recovery log when recovering the upper jbd2 journal when mount again.

syslog:
ocfs2: File system on device (252,1) was not unmounted cleanly, recovering it. fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 0 fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 1 fs/jbd2/recovery.c:(do_one_pass, 449): Starting recovery pass 2 fs/jbd2/recovery.c:(jbd2_journal_recover, 278): JBD2: recovery, exit status 0, recovered transactions 13 to 13

Due to first commit seq 13 recorded in journal super is not consistent with the value recorded in block 1(seq is 14), journal recovery will be terminated before seq 15 even though it is an unbroken commit, inode 8257802 is a new file and it will be lost.

---
 fs/ocfs2/journal.c | 8 ++++++++
 1 file changed, 8 insertions(+)
fs/ocfs2/journal.c +8 -0
index fc1f209e5db0..c27d8ef47392 100644
@@ -1080,6 +1080,14 @@ int ocfs2_journal_load(struct ocfs2_journal *journal, int local, int replayed)
 
 	ocfs2_clear_journal_error(osb->sb, journal->j_journal, osb->slot_num);
 
+	if (replayed) {
+		jbd2_journal_lock_updates(journal->j_journal);
+		status = jbd2_journal_flush(journal->j_journal);
+		jbd2_journal_unlock_updates(journal->j_journal);
+		if (status < 0)
+			mlog_errno(status);
+	}
+
 	status = ocfs2_journal_toggle_dirty(osb, 1, replayed);
 	if (status < 0) {
 		mlog_errno(status);
Signature · 1 line
2.20.1