Skip to contentSkip to conversation

arm64: dts: qcom: pm6150: Add label to pwrkey node

PATCH In review Stephen Boyd 2 participants 2 messages Jan 15, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm64: dts: qcom: pm6150: Add label to pwrkey node

Some platforms don't want to use the pmic power key as the power key event. Add a label so platforms can easily reference and mark this node as status = "disabled".

Cc Kiran Gunda <[email protected]>
Cc Rajendra Nayak <[email protected]>
Cc Douglas Anderson <[email protected]>
---
 arch/arm64/boot/dts/qcom/pm6150.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/pm6150.dtsi +1 -1
index 23534639f455..57af0b4a384d 100644
@@ -20,7 +20,7 @@ pm6150_pon: pon@800 {
 			mode-bootloader = <0x2>;
 			mode-recovery = <0x1>;
 
-			pwrkey {
+			pm6150_pwrkey: pwrkey {
 				compatible = "qcom,pm8941-pwrkey";
 				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
 				debounce = <15625>;
Signature · 1 line
Sent by a computer, using git, on the internet
Reviewed-by on v1 1/1
#1 lore raw

Hi,

Quoted 5 lines · Stephen Boyd

Some platforms don't want to use the pmic power key as the power key event. Add a label so platforms can easily reference and mark this node as status = "disabled".

Quoted 7 lines
Cc Kiran Gunda <[email protected]>
Cc Rajendra Nayak <[email protected]>
Cc Douglas Anderson <[email protected]>
---
 arch/arm64/boot/dts/qcom/pm6150.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)