virtio-balloon: Reject qmp_balloon during hot-unplug
cover virtio-balloon: Reject qmp_balloon during hot-unplug
Julia Suvorova (2):
qdev: Introduce qdev_get_bus_device
virtio-balloon: Reject qmp_balloon during hot-unplug
balloon.c | 2 +- hw/core/qdev.c | 5 +++++ hw/pci-bridge/pci_expander_bridge.c | 4 +++- hw/scsi/scsi-bus.c | 4 +++- hw/usb/bus.c | 4 +++- hw/usb/dev-smartcard-reader.c | 32 +++++++++++++++++++++-------- hw/virtio/virtio-balloon.c | 9 +++++++- hw/virtio/virtio-pci.c | 16 +++++++++++++-- include/hw/qdev-core.h | 2 ++ include/sysemu/balloon.h | 2 +- 10 files changed, 64 insertions(+), 16 deletions(-)
Signature · 1 line
2.24.1
PATCH 1/2 qdev: Introduce qdev_get_bus_device
For bus devices, it is useful to be able to handle the parent device.
--- hw/core/qdev.c | 5 +++++ hw/pci-bridge/pci_expander_bridge.c | 4 +++- hw/scsi/scsi-bus.c | 4 +++- hw/usb/bus.c | 4 +++- hw/usb/dev-smartcard-reader.c | 32 +++++++++++++++++++++-------- hw/virtio/virtio-pci.c | 16 +++++++++++++-- include/hw/qdev-core.h | 2 ++ 7 files changed, 54 insertions(+), 13 deletions(-)
hw/core/qdev.c +5 -0
@@ -114,6 +114,11 @@ void qdev_set_parent_bus(DeviceState *dev, BusState *bus) } } +DeviceState *qdev_get_bus_device (const DeviceState *dev) +{ +return dev->parent_bus ? dev->parent_bus->parent :NULL ; +} +/* Create a new device. This only initializes the device state structure and allows properties to be set. The device still needs to be realized. See qdev-core.h. */
hw/pci-bridge/pci_expander_bridge.c +3 -1
@@ -125,9 +125,11 @@ static char *pxb_host_ofw_unit_address(const SysBusDevice *dev)assert (position >=0 ); pxb_dev_base =DEVICE (pxb_dev); - main_host =PCI_HOST_BRIDGE (pxb_dev_base->parent_bus->parent); + main_host =PCI_HOST_BRIDGE (qdev_get_bus_device (pxb_dev_base)); main_host_sbd =SYS_BUS_DEVICE (main_host); +g_assert (main_host); +if (main_host_sbd->num_mmio >0 ) {return g_strdup_printf (TARGET_FMT_plx",%x" , main_host_sbd->mmio[0 ].addr, position +1 );
hw/scsi/scsi-bus.c +3 -1
@@ -1558,10 +1558,12 @@ void scsi_device_purge_requests(SCSIDevice *sdev, SCSISense sense)static char *scsibus_get_dev_path (DeviceState *dev) {SCSIDevice *d =SCSI_DEVICE (dev); -DeviceState *hba = dev->parent_bus->parent; +DeviceState *hba =qdev_get_bus_device (dev);char *id;char *path; +g_assert (hba); + id =qdev_get_dev_path (hba);if (id) { path =g_strdup_printf ("%s/%d:%d:%d" , id, d->channel, d->id, d->lun);
hw/usb/bus.c +3 -1
@@ -587,9 +587,11 @@ static void usb_bus_dev_print(Monitor *mon, DeviceState *qdev, int indent)static char *usb_get_dev_path (DeviceState *qdev) {USBDevice *dev =USB_DEVICE (qdev); -DeviceState *hcd = qdev->parent_bus->parent; +DeviceState *hcd =qdev_get_bus_device (qdev);char *id =NULL ; +g_assert (hcd); +if (dev->flags & (1 <<USB_DEV_FLAG_FULL_PATH )) { id =qdev_get_dev_path (hcd); }
hw/usb/dev-smartcard-reader.c +24 -8
@@ -1185,10 +1185,12 @@ void ccid_card_send_apdu_to_guest(CCIDCardState *card, uint8_t *apdu, uint32_t len) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev);Answer *answer; +g_assert (dev); +if (!ccid_has_pending_answers (s)) {DPRINTF (s,1 ,"CCID ERROR: got an APDU without pending answers\n" );return ;
@@ -1208,9 +1210,11 @@ void ccid_card_send_apdu_to_guest(CCIDCardState *card,void ccid_card_card_removed (CCIDCardState *card) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev); +g_assert (dev); +ccid_on_slot_change (s, false);ccid_flush_pending_answers (s);ccid_reset (s);
@@ -1219,9 +1223,11 @@ void ccid_card_card_removed(CCIDCardState *card)int ccid_card_ccid_attach (CCIDCardState *card) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev); +g_assert (dev); +DPRINTF (s,1 ,"CCID Attach\n" );return 0 ; }
@@ -1229,9 +1235,11 @@ int ccid_card_ccid_attach(CCIDCardState *card)void ccid_card_ccid_detach (CCIDCardState *card) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev); +g_assert (dev); +DPRINTF (s,1 ,"CCID Detach\n" );if (ccid_card_inserted (s)) {ccid_on_slot_change (s, false);
@@ -1242,9 +1250,11 @@ void ccid_card_ccid_detach(CCIDCardState *card)void ccid_card_card_error (CCIDCardState *card,uint64_t error) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev); +g_assert (dev); + s->bmCommandStatus =COMMAND_STATUS_FAILED ; s->last_answer_error = error;DPRINTF (s,1 ,"VSC_Error: %" PRIX64 "\n" , s->last_answer_error);
@@ -1261,9 +1271,11 @@ void ccid_card_card_error(CCIDCardState *card, uint64_t error)void ccid_card_card_inserted (CCIDCardState *card) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev); +g_assert (dev); + s->bmCommandStatus =COMMAND_STATUS_NO_ERROR ;ccid_flush_pending_answers (s);ccid_on_slot_change (s, true);
@@ -1273,10 +1285,12 @@ static void ccid_card_unrealize(DeviceState *qdev, Error **errp) {CCIDCardState *card =CCID_CARD (qdev);CCIDCardClass *cc =CCID_CARD_GET_CLASS (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev);Error *local_err =NULL ; +g_assert (dev); +if (ccid_card_inserted (s)) {ccid_card_card_removed (card); }
@@ -1294,10 +1308,12 @@ static void ccid_card_realize(DeviceState *qdev, Error **errp) {CCIDCardState *card =CCID_CARD (qdev);CCIDCardClass *cc =CCID_CARD_GET_CLASS (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev);Error *local_err =NULL ; +g_assert (dev); +if (card->slot !=0 ) {error_setg (errp,"usb-ccid supports one slot, can't add %d" , card->slot);
hw/virtio/virtio-pci.c +14 -2
@@ -1317,9 +1317,21 @@ static uint64_t virtio_pci_notify_read(void *opaque, hwaddr addr,static void virtio_pci_notify_write (void *opaque,hwaddr addr,uint64_t val,unsigned size) { +DeviceState *dev =DEVICE (opaque);VirtIODevice *vdev = opaque; -VirtIOPCIProxy *proxy =VIRTIO_PCI (DEVICE (vdev)->parent_bus->parent); -unsigned queue = addr /virtio_pci_queue_mem_mult (proxy); +VirtIOPCIProxy *proxy =VIRTIO_PCI (qdev_get_bus_device (dev)); +unsigned queue; + +/* +* During unplug virtio device may have +* already been disconnected from the bus +*/ +if (!proxy) { +warn_report ("Device %s doesn't have parent bus" , vdev->name); +return ; + } + + queue = addr /virtio_pci_queue_mem_mult (proxy);if (queue <VIRTIO_QUEUE_MAX ) {virtio_queue_notify (vdev, queue);
include/hw/qdev-core.h +2 -0
@@ -452,6 +452,8 @@ Object *qdev_get_machine(void);/* FIXME: make this a link<> */ void qdev_set_parent_bus (DeviceState *dev,BusState *bus); +DeviceState *qdev_get_bus_device (const DeviceState *dev); +extern bool qdev_hotplug;extern bool qdev_hot_removed;
Signature · 1 line
2.24.1
Re: [PATCH 1/2] qdev: Introduce qdev_get_bus_device
Hi Julia,
Cc'ing Markus for the qdev/qbus analysis.
Quoted 11 lines · Julia Suvorova
For bus devices, it is useful to be able to handle the parent device.
Signed-off-by Julia Suvorova <[email protected]>--- hw/core/qdev.c | 5 +++++ hw/pci-bridge/pci_expander_bridge.c | 4 +++- hw/scsi/scsi-bus.c | 4 +++- hw/usb/bus.c | 4 +++- hw/usb/dev-smartcard-reader.c | 32 +++++++++++++++++++++-------- hw/virtio/virtio-pci.c | 16 +++++++++++++-- include/hw/qdev-core.h | 2 ++
Please consider using the scripts/git.orderfile config.
hw/core/qdev.c void qdev_set_parent_bus(DeviceState *dev, BusState *bus) · line 117
Quoted 11 lines
7 files changed, 54 insertions(+), 13 deletions(-)hw/core/qdev.c +1
-0@@ -114,6 +114,11 @@ void qdev_set_parent_bus(DeviceState *dev, BusState *bus) } } +DeviceState *qdev_get_bus_device (const DeviceState *dev)
We have qdev_get_bus_hotplug_handler(), this follow the naming, OK.
Quoted 12 lines
hw/core/qdev.c +4
-0+{ +return dev->parent_bus ? dev->parent_bus->parent :NULL ; +} +/* Create a new device. This only initializes the device state structure and allows properties to be set. The device still needs to be realized. See qdev-core.h. */ hw/pci-bridge/pci_expander_bridge.c +0
-0
hw/pci-bridge/pci_expander_bridge.c static char *pxb_host_ofw_unit_address(const SysBusDevice *dev) · line 131
Quoted 8 lines
hw/pci-bridge/pci_expander_bridge.c +2
-1@@ -125,9 +125,11 @@ static char *pxb_host_ofw_unit_address(const SysBusDevice *dev)assert (position >=0 ); pxb_dev_base =DEVICE (pxb_dev); - main_host =PCI_HOST_BRIDGE (pxb_dev_base->parent_bus->parent); + main_host =PCI_HOST_BRIDGE (qdev_get_bus_device (pxb_dev_base)); main_host_sbd =SYS_BUS_DEVICE (main_host); +g_assert (main_host);
I found myself stuck reviewing this patch for 25min, I'm not sure what's bugging me yet, so I'll take notes a-la-Markus-style.
We have the qdev API, with DeviceState.
We have the qbus API, with BusState.
A BusState is not a DeviceState but a raw Object.
It keeps a pointer to the a DeviceState parent, a HotplugHandler, and a list of BusChild.
BusChild are neither DeviceState nor Object, but keep a pointer the a DeviceState.
TYPE_HOTPLUG_HANDLER is an interface. It can be implemented by any object, but its API seems expects a DeviceState as argument.
Looking at examples implementing TYPE_HOTPLUG_HANDLER:
- TYPE_USB_BUS. It inherits TYPE_BUS. Handlers will be called with USBDevice as argument (TYPE_USB_DEVICE -> TYPE_DEVICE).
- TYPE_PCI_BRIDGE_DEV. Inherits TYPE_PCI_BRIDGE -> TYPE_PCI_DEVICE -> TYPE_DEVICE. Handlers expects PCIDevice (TYPE_PCI_DEVICE).
- TYPE_PC_MACHINE. It inherits TYPE_X86_MACHINE -> TYPE_MACHINE -> TYPE_OBJECT. Not a TYPE_BUS. Handlers for TYPE_PC_DIMM, TYPE_CPU and TYPE_VIRTIO_PMEM_PCI. Complex... TYPE_PC_DIMM/TYPE_CPU are TYPE_DEVICE. For TYPE_VIRTIO_PMEM_PCI we have VirtIOPMEMPCI -> VirtIOPCIProxy -> PCIDevice.
- USB_CCID_DEV. Inherits TYPE_USB_DEVICE -> TYPE_DEVICE. Only one 'unplug' handler which likely expects USBCCIDState.
- TYPE_SCSI_BUS. Inherits TYPE_BUS. Also a single 'unplug' handler expecting SCSIDevice.
- TYPE_VIRTIO_SCSI. Inherits TYPE_VIRTIO_SCSI_COMMON -> TYPE_VIRTIO_DEVICE -> TYPE_DEVICE. Handlers expect VirtIOSCSI.
No simple pattern so far.
Looking back at qbus. qbus_initfn() enforces a TYPE_HOTPLUG_HANDLER property on BusState (which is not a DeviceState). So IIUC TYPE_BUS also implements TYPE_HOTPLUG_HANDLER.
---
Back to your patch, you add asserts() calls because you expect SysBusDeviceClass::explicit_ofw_unit_address() to be called before the device is plugged on a bus.
This handler is only used by sysbus_get_fw_dev_path(), so BusClass::get_dev_path(), similar to the scsi/usb following cases.
BusClass::get_dev_path() is only called in qdev_get_dev_path() were we know that dev->parent_bus is not NULL, because checked there.
So the assert is pointless.
Quoted 9 lines
hw/pci-bridge/pci_expander_bridge.c +1
-0+if (main_host_sbd->num_mmio >0 ) {return g_strdup_printf (TARGET_FMT_plx",%x" , main_host_sbd->mmio[0 ].addr, position +1 );hw/scsi/scsi-bus.c +0
-0
hw/scsi/scsi-bus.c void scsi_device_purge_requests(SCSIDevice *sdev, SCSISense sense) · line 1565
Quoted 9 lines
hw/scsi/scsi-bus.c +2
-1@@ -1558,10 +1558,12 @@ void scsi_device_purge_requests(SCSIDevice *sdev, SCSISense sense)static char *scsibus_get_dev_path (DeviceState *dev) {SCSIDevice *d =SCSI_DEVICE (dev); -DeviceState *hba = dev->parent_bus->parent; +DeviceState *hba =qdev_get_bus_device (dev);char *id;char *path; +g_assert (hba);
Similarly, we checked in qdev_get_dev_path().
Quoted 9 lines
hw/scsi/scsi-bus.c +1
-0+ id =qdev_get_dev_path (hba);if (id) { path =g_strdup_printf ("%s/%d:%d:%d" , id, d->channel, d->id, d->lun);hw/usb/bus.c +0
-0
hw/usb/bus.c static void usb_bus_dev_print(Monitor *mon, DeviceState *qdev, int indent) · line 593
Quoted 8 lines
hw/usb/bus.c +2
-1@@ -587,9 +587,11 @@ static void usb_bus_dev_print(Monitor *mon, DeviceState *qdev, int indent)static char *usb_get_dev_path (DeviceState *qdev) {USBDevice *dev =USB_DEVICE (qdev); -DeviceState *hcd = qdev->parent_bus->parent; +DeviceState *hcd =qdev_get_bus_device (qdev);char *id =NULL ; +g_assert (hcd);
Similarly, we checked in qdev_get_dev_path().
Quoted 9 lines
hw/usb/bus.c +1
-0+if (dev->flags & (1 <<USB_DEV_FLAG_FULL_PATH )) { id =qdev_get_dev_path (hcd); }hw/usb/dev-smartcard-reader.c +0
-0
hw/usb/dev-smartcard-reader.c void ccid_card_send_apdu_to_guest(CCIDCardState *card, · line 1192
Quoted 9 lines
hw/usb/dev-smartcard-reader.c +2
-1@@ -1185,10 +1185,12 @@ void ccid_card_send_apdu_to_guest(CCIDCardState *card, uint8_t *apdu, uint32_t len) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev);Answer *answer; +g_assert (dev);
Skipping this one for now.
hw/usb/dev-smartcard-reader.c void ccid_card_send_apdu_to_guest(CCIDCardState *card, · line 1216
Quoted 13 lines
hw/usb/dev-smartcard-reader.c +3
-1+if (!ccid_has_pending_answers (s)) {DPRINTF (s,1 ,"CCID ERROR: got an APDU without pending answers\n" );return ;@@ -1208,9 +1210,11 @@ void ccid_card_send_apdu_to_guest(CCIDCardState *card,void ccid_card_card_removed (CCIDCardState *card) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev); +g_assert (dev);
At removal time we assume it was previously inserted.
hw/usb/dev-smartcard-reader.c void ccid_card_card_removed(CCIDCardState *card) · line 1229
Quoted 13 lines
hw/usb/dev-smartcard-reader.c +3
-1+ccid_on_slot_change (s, false);ccid_flush_pending_answers (s);ccid_reset (s);@@ -1219,9 +1223,11 @@ void ccid_card_card_removed(CCIDCardState *card)int ccid_card_ccid_attach (CCIDCardState *card) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev); +g_assert (dev);
Skipping this one for now.
hw/usb/dev-smartcard-reader.c int ccid_card_ccid_attach(CCIDCardState *card) · line 1241
Quoted 13 lines
hw/usb/dev-smartcard-reader.c +3
-1+DPRINTF (s,1 ,"CCID Attach\n" );return 0 ; }@@ -1229,9 +1235,11 @@ int ccid_card_ccid_attach(CCIDCardState *card)void ccid_card_ccid_detach (CCIDCardState *card) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev); +g_assert (dev);
At detach time we assume it was attached.
hw/usb/dev-smartcard-reader.c void ccid_card_ccid_detach(CCIDCardState *card) · line 1256
Quoted 13 lines
hw/usb/dev-smartcard-reader.c +3
-1+DPRINTF (s,1 ,"CCID Detach\n" );if (ccid_card_inserted (s)) {ccid_on_slot_change (s, false);@@ -1242,9 +1250,11 @@ void ccid_card_ccid_detach(CCIDCardState *card)void ccid_card_card_error (CCIDCardState *card,uint64_t error) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev); +g_assert (dev);
Skipping this one for now.
hw/usb/dev-smartcard-reader.c void ccid_card_card_error(CCIDCardState *card, uint64_t error) · line 1277
Quoted 13 lines
hw/usb/dev-smartcard-reader.c +3
-1+ s->bmCommandStatus =COMMAND_STATUS_FAILED ; s->last_answer_error = error;DPRINTF (s,1 ,"VSC_Error: %" PRIX64 "\n" , s->last_answer_error);@@ -1261,9 +1271,11 @@ void ccid_card_card_error(CCIDCardState *card, uint64_t error)void ccid_card_card_inserted (CCIDCardState *card) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev); +g_assert (dev);
Skipping this one for now.
Quoted 5 lines
hw/usb/dev-smartcard-reader.c +1
-0+ s->bmCommandStatus =COMMAND_STATUS_NO_ERROR ;ccid_flush_pending_answers (s);ccid_on_slot_change (s, true);
hw/usb/dev-smartcard-reader.c static void ccid_card_unrealize(DeviceState *qdev, Error **errp) · line 1292
Quoted 9 lines
hw/usb/dev-smartcard-reader.c +2
-1@@ -1273,10 +1285,12 @@ static void ccid_card_unrealize(DeviceState *qdev, Error **errp) {CCIDCardState *card =CCID_CARD (qdev);CCIDCardClass *cc =CCID_CARD_GET_CLASS (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev);Error *local_err =NULL ; +g_assert (dev);
Here we assume it was realized.
Quoted 28 lines
hw/usb/dev-smartcard-reader.c +4
-1+if (ccid_card_inserted (s)) {ccid_card_card_removed (card); }@@ -1294,10 +1308,12 @@ static void ccid_card_realize(DeviceState *qdev, Error **errp) {CCIDCardState *card =CCID_CARD (qdev);CCIDCardClass *cc =CCID_CARD_GET_CLASS (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev);Error *local_err =NULL ; +g_assert (dev); +if (card->slot !=0 ) {error_setg (errp,"usb-ccid supports one slot, can't add %d" , card->slot);hw/virtio/virtio-pci.c +1
-0@@ -1317,9 +1317,21 @@ static uint64_t virtio_pci_notify_read(void *opaque, hwaddr addr,static void virtio_pci_notify_write (void *opaque,hwaddr addr,uint64_t val,unsigned size) { +DeviceState *dev =DEVICE (opaque);VirtIODevice *vdev = opaque;
hw/virtio/virtio-pci.c static uint64_t virtio_pci_notify_read(void *opaque, hwaddr addr, · line 1329
Quoted 10 lines
hw/virtio/virtio-pci.c +8
-2-VirtIOPCIProxy *proxy =VIRTIO_PCI (DEVICE (vdev)->parent_bus->parent); -unsigned queue = addr /virtio_pci_queue_mem_mult (proxy); +VirtIOPCIProxy *proxy =VIRTIO_PCI (qdev_get_bus_device (dev)); +unsigned queue; + +/* +* During unplug virtio device may have +* already been disconnected from the bus +*/ +if (!proxy) {
So VIRTIO_PCI() calls OBJECT_CHECK().
/*
* OBJECT_CHECK:
* If an invalid object is passed to this function, a run time assert
will be
* generated.
*/
#define OBJECT_CHECK(type, obj, name) \
((type *)object_dynamic_cast_assert(OBJECT(obj), (name), \
__FILE__, __LINE__, __func__))Looking at object_dynamic_cast_assert(), even building with CONFIG_QOM_CAST_DEBUG, it looks passing obj=NULL will return NULL...
OK, so this check makes sense. I wonder how you got there. No bugreport or crash mentioned in this patch or the cover. Googling for 'virtio_pci_notify_write' I found https://www.mail-archive.com/[email protected]/msg667664.html which is not filled as a Launchpad QEMU bug. The reporter wrote "but parent BusState was already freed & set to NULL." If you are trying to fix a bug, it would help if you give the context to the reviewers, at least the backtrace would have saved me some minutes of the 2 hours+ I'm looking at this.
Quoted 13 lines
hw/virtio/virtio-pci.c +5
-0+warn_report ("Device %s doesn't have parent bus" , vdev->name); +return ; + } + + queue = addr /virtio_pci_queue_mem_mult (proxy);if (queue <VIRTIO_QUEUE_MAX ) {virtio_queue_notify (vdev, queue);include/hw/qdev-core.h +0
-0
include/hw/qdev-core.h Object *qdev_get_machine(void); · line 459
Quoted 8 lines
include/hw/qdev-core.h +2
-0@@ -452,6 +452,8 @@ Object *qdev_get_machine(void);/* FIXME: make this a link<> */ void qdev_set_parent_bus (DeviceState *dev,BusState *bus); +DeviceState *qdev_get_bus_device (const DeviceState *dev); +extern bool qdev_hotplug;extern bool qdev_hot_removed;
I suggest you split this patch in:
1/ introduce qdev_get_bus_device()
- hw/core/qdev.c
- include/hw/qdev-core.h
2/ obvious use of qdev_get_bus_device(), no assert
- hw/pci-bridge/pci_expander_bridge.c
- hw/scsi/scsi-bus.c
- hw/usb/bus.c
3/ use of qdev_get_bus_device(), assertions
- hw/usb/dev-smartcard-reader.c
4a/ use qdev_get_bus_device()
- hw/virtio/virtio-pci.c
4b/ !proxy bugfix
- hw/virtio/virtio-pci.c
In 4b/ please mention the bug report and backtrace.
You might squash 1 + 4a or 4a + 4b.
Regards,
Phil.
Re: [PATCH 1/2] qdev: Introduce qdev_get_bus_device
Quoted 54 lines · Philippe Mathieu-Daudé
Hi Julia,
Cc'ing Markus for the qdev/qbus analysis.
Quoted 11 lines · Julia Suvorova
For bus devices, it is useful to be able to handle the parent device.
Signed-off-by Julia Suvorova <[email protected]>--- hw/core/qdev.c | 5 +++++ hw/pci-bridge/pci_expander_bridge.c | 4 +++- hw/scsi/scsi-bus.c | 4 +++- hw/usb/bus.c | 4 +++- hw/usb/dev-smartcard-reader.c | 32 +++++++++++++++++++++-------- hw/virtio/virtio-pci.c | 16 +++++++++++++-- include/hw/qdev-core.h | 2 ++Please consider using the
scripts/git.orderfileconfig.hw/core/qdev.c void qdev_set_parent_bus(DeviceState *dev, BusState *bus) · line 116
Quoted 10 lines
7 files changed, 54 insertions(+), 13 deletions(-)hw/core/qdev.c +0
-0@@ -114,6 +114,11 @@ void qdev_set_parent_bus(DeviceState *dev, BusState *bus) } } +DeviceState *qdev_get_bus_device(const DeviceState *dev)We have
qdev_get_bus_hotplug_handler(), this follow the naming, OK.Quoted 12 lines
hw/core/qdev.c +4
-0+{ +return dev->parent_bus ? dev->parent_bus->parent :NULL ; +} +/* Create a new device. This only initializes the device state structure and allows properties to be set. The device still needs to be realized. See qdev-core.h. */ hw/pci-bridge/pci_expander_bridge.c +0
-0hw/pci-bridge/pci_expander_bridge.c static char *pxb_host_ofw_unit_address(const SysBusDevice *dev) · line 129
Quoted 6 lines
hw/pci-bridge/pci_expander_bridge.c +1
-1@@ -125,9 +125,11 @@ static char *pxb_host_ofw_unit_address(const SysBusDevice *dev)assert (position >=0 ); pxb_dev_base =DEVICE (pxb_dev); - main_host =PCI_HOST_BRIDGE (pxb_dev_base->parent_bus->parent); + main_host =PCI_HOST_BRIDGE (qdev_get_bus_device (pxb_dev_base)); main_host_sbd =SYS_BUS_DEVICE (main_host); +g_assert (main_host);I found myself stuck reviewing this patch for 25min, I'm not sure what's bugging me yet, so I'll take notes a-la-Markus-style.
Quoted 6 lines
We have the qdev API, with DeviceState.
We have the qbus API, with BusState.
A BusState is not a DeviceState but a raw Object.
It's a completely separate kind of Object.
Quoted 6 lines
It keeps a pointer to the a DeviceState parent, a HotplugHandler, and a list of BusChild.
BusChild are neither DeviceState nor Object, but keep a pointer the a DeviceState.
It's a thin wrapper around DeviceState to support collecting the DeviceState into a list.
Quoted 2 lines
TYPE_HOTPLUG_HANDLERis an interface. It can be implemented by any object, but its API seems expects a DeviceState as argument.
What do you mean by "interface expects an argument"?
The interface methods all take a HotplugHandler * and a DeviceState *. The latter is the device being plugged / unplugged, the former is its hotplug handler. In the generic case, @dev's hotplug handler is qdev_get_hotplug_handler(dev).
Quoted 25 lines
Looking at examples implementing
TYPE_HOTPLUG_HANDLER:-
TYPE_USB_BUS. It inheritsTYPE_BUS. Handlers will be called with USBDevice as argument (TYPE_USB_DEVICE->TYPE_DEVICE).-
TYPE_PCI_BRIDGE_DEV. InheritsTYPE_PCI_BRIDGE->TYPE_PCI_DEVICE->TYPE_DEVICE. Handlers expects PCIDevice (TYPE_PCI_DEVICE).-
TYPE_PC_MACHINE. It inheritsTYPE_X86_MACHINE->TYPE_MACHINE->TYPE_OBJECT. Not aTYPE_BUS. Handlers forTYPE_PC_DIMM,TYPE_CPUandTYPE_VIRTIO_PMEM_PCI. Complex... TYPE_PC_DIMM/TYPE_CPU areTYPE_DEVICE.
ForTYPE_VIRTIO_PMEM_PCIwe have VirtIOPMEMPCI -> VirtIOPCIProxy -> PCIDevice.-
USB_CCID_DEV. InheritsTYPE_USB_DEVICE->TYPE_DEVICE. Only one 'unplug' handler which likely expects USBCCIDState.-
TYPE_SCSI_BUS. InheritsTYPE_BUS. Also a single 'unplug' handler expecting SCSIDevice.-
TYPE_VIRTIO_SCSI. InheritsTYPE_VIRTIO_SCSI_COMMON->TYPE_VIRTIO_DEVICE->TYPE_DEVICE. Handlers expect VirtIOSCSI.
Quoted 6 lines
No simple pattern so far.
Looking back at qbus.
qbus_initfn()enforces aTYPE_HOTPLUG_HANDLERproperty on BusState (which is not a DeviceState). So IIUCTYPE_BUSalso implementsTYPE_HOTPLUG_HANDLER.
I think this merely creates a reference to the concrete bus's hotplug handler. TYPE_BUS is abstract, and doesn't implement any interfaces (its .interfaces is empty).
Anything else you'd like me to check for you?
[...]
Re: [PATCH 1/2] qdev: Introduce qdev_get_bus_device
In reply to Julia SuvorovaOn Wed, 15 Jan 2020 23:40:24 +0100
Julia Suvorova <[email protected]> wrote:
I's add () at the end of SUJ so it would be obvious that's a function
Quoted 1 line
For bus devices, it is useful to be able to handle the parent device.
maybe something like that would be more clear:
Add a wrapper qdev_get_bus_device() to replace dev->parent_bus->parent, (add why here)
Quoted 17 lines
Signed-off-by Julia Suvorova <[email protected]>--- hw/core/qdev.c | 5 +++++ hw/pci-bridge/pci_expander_bridge.c | 4 +++- hw/scsi/scsi-bus.c | 4 +++- hw/usb/bus.c | 4 +++- hw/usb/dev-smartcard-reader.c | 32 +++++++++++++++++++++-------- hw/virtio/virtio-pci.c | 16 +++++++++++++-- include/hw/qdev-core.h | 2 ++ 7 files changed, 54 insertions(+), 13 deletions(-)hw/core/qdev.c +0
-0
hw/core/qdev.c void qdev_set_parent_bus(DeviceState *dev, BusState *bus) · line 119
Quoted 6 lines
hw/core/qdev.c +3
-0@@ -114,6 +114,11 @@ void qdev_set_parent_bus(DeviceState *dev, BusState *bus) } } +DeviceState *qdev_get_bus_device (const DeviceState *dev) +{ +return dev->parent_bus ? dev->parent_bus->parent :NULL ;
Does any caller expect to get NULL?
If not I'd move asserts you introduce below to this place only and drop condition.
Quoted 185 lines
hw/core/qdev.c +2
-0+} +/* Create a new device. This only initializes the device state structure and allows properties to be set. The device still needs to be realized. See qdev-core.h. */ hw/pci-bridge/pci_expander_bridge.c +3
-1@@ -125,9 +125,11 @@ static char *pxb_host_ofw_unit_address(const SysBusDevice *dev)assert (position >=0 ); pxb_dev_base =DEVICE (pxb_dev); - main_host =PCI_HOST_BRIDGE (pxb_dev_base->parent_bus->parent); + main_host =PCI_HOST_BRIDGE (qdev_get_bus_device (pxb_dev_base)); main_host_sbd =SYS_BUS_DEVICE (main_host); +g_assert (main_host); +if (main_host_sbd->num_mmio >0 ) {return g_strdup_printf (TARGET_FMT_plx",%x" , main_host_sbd->mmio[0 ].addr, position +1 );hw/scsi/scsi-bus.c +3
-1@@ -1558,10 +1558,12 @@ void scsi_device_purge_requests(SCSIDevice *sdev, SCSISense sense)static char *scsibus_get_dev_path (DeviceState *dev) {SCSIDevice *d =SCSI_DEVICE (dev); -DeviceState *hba = dev->parent_bus->parent; +DeviceState *hba =qdev_get_bus_device (dev);char *id;char *path; +g_assert (hba); + id =qdev_get_dev_path (hba);if (id) { path =g_strdup_printf ("%s/%d:%d:%d" , id, d->channel, d->id, d->lun);hw/usb/bus.c +3
-1@@ -587,9 +587,11 @@ static void usb_bus_dev_print(Monitor *mon, DeviceState *qdev, int indent)static char *usb_get_dev_path (DeviceState *qdev) {USBDevice *dev =USB_DEVICE (qdev); -DeviceState *hcd = qdev->parent_bus->parent; +DeviceState *hcd =qdev_get_bus_device (qdev);char *id =NULL ; +g_assert (hcd); +if (dev->flags & (1 <<USB_DEV_FLAG_FULL_PATH )) { id =qdev_get_dev_path (hcd); }hw/usb/dev-smartcard-reader.c +24
-8@@ -1185,10 +1185,12 @@ void ccid_card_send_apdu_to_guest(CCIDCardState *card, uint8_t *apdu, uint32_t len) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev);Answer *answer; +g_assert (dev); +if (!ccid_has_pending_answers (s)) {DPRINTF (s,1 ,"CCID ERROR: got an APDU without pending answers\n" );return ;@@ -1208,9 +1210,11 @@ void ccid_card_send_apdu_to_guest(CCIDCardState *card,void ccid_card_card_removed (CCIDCardState *card) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev); +g_assert (dev); +ccid_on_slot_change (s, false);ccid_flush_pending_answers (s);ccid_reset (s);@@ -1219,9 +1223,11 @@ void ccid_card_card_removed(CCIDCardState *card)int ccid_card_ccid_attach (CCIDCardState *card) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev); +g_assert (dev); +DPRINTF (s,1 ,"CCID Attach\n" );return 0 ; }@@ -1229,9 +1235,11 @@ int ccid_card_ccid_attach(CCIDCardState *card)void ccid_card_ccid_detach (CCIDCardState *card) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev); +g_assert (dev); +DPRINTF (s,1 ,"CCID Detach\n" );if (ccid_card_inserted (s)) {ccid_on_slot_change (s, false);@@ -1242,9 +1250,11 @@ void ccid_card_ccid_detach(CCIDCardState *card)void ccid_card_card_error (CCIDCardState *card,uint64_t error) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev); +g_assert (dev); + s->bmCommandStatus =COMMAND_STATUS_FAILED ; s->last_answer_error = error;DPRINTF (s,1 ,"VSC_Error: %" PRIX64 "\n" , s->last_answer_error);@@ -1261,9 +1271,11 @@ void ccid_card_card_error(CCIDCardState *card, uint64_t error)void ccid_card_card_inserted (CCIDCardState *card) {DeviceState *qdev =DEVICE (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev); +g_assert (dev); + s->bmCommandStatus =COMMAND_STATUS_NO_ERROR ;ccid_flush_pending_answers (s);ccid_on_slot_change (s, true);@@ -1273,10 +1285,12 @@ static void ccid_card_unrealize(DeviceState *qdev, Error **errp) {CCIDCardState *card =CCID_CARD (qdev);CCIDCardClass *cc =CCID_CARD_GET_CLASS (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev);Error *local_err =NULL ; +g_assert (dev); +if (ccid_card_inserted (s)) {ccid_card_card_removed (card); }@@ -1294,10 +1308,12 @@ static void ccid_card_realize(DeviceState *qdev, Error **errp) {CCIDCardState *card =CCID_CARD (qdev);CCIDCardClass *cc =CCID_CARD_GET_CLASS (card); -USBDevice *dev =USB_DEVICE (qdev->parent_bus->parent); +USBDevice *dev =USB_DEVICE (qdev_get_bus_device (qdev));USBCCIDState *s =USB_CCID_DEV (dev);Error *local_err =NULL ; +g_assert (dev); +if (card->slot !=0 ) {error_setg (errp,"usb-ccid supports one slot, can't add %d" , card->slot);hw/virtio/virtio-pci.c +4
-2@@ -1317,9 +1317,21 @@ static uint64_t virtio_pci_notify_read(void *opaque, hwaddr addr,static void virtio_pci_notify_write (void *opaque,hwaddr addr,uint64_t val,unsigned size) { +DeviceState *dev =DEVICE (opaque);VirtIODevice *vdev = opaque; -VirtIOPCIProxy *proxy =VIRTIO_PCI (DEVICE (vdev)->parent_bus->parent); -unsigned queue = addr /virtio_pci_queue_mem_mult (proxy); +VirtIOPCIProxy *proxy =VIRTIO_PCI (qdev_get_bus_device (dev)); +unsigned queue; +
hw/virtio/virtio-pci.c static uint64_t virtio_pci_notify_read(void *opaque, hwaddr addr, · line 1336
Quoted 10 lines
hw/virtio/virtio-pci.c +10
-0+/* +* During unplug virtio device may have +* already been disconnected from the bus +*/ +if (!proxy) { +warn_report ("Device %s doesn't have parent bus" , vdev->name); +return ; + } + + queue = addr /virtio_pci_queue_mem_mult (proxy);
modulo qdev_get_bus_device() change, the rest of this hunk looks to unrelated to this patch.
I'd split it out into separate patch with proper commit message.
Quoted 15 lines
hw/virtio/virtio-pci.c +0
-0if (queue <VIRTIO_QUEUE_MAX ) {virtio_queue_notify(vdev, queue);include/hw/qdev-core.h +2
-0@@ -452,6 +452,8 @@ Object *qdev_get_machine(void);/* FIXME: make this a link<> */ void qdev_set_parent_bus (DeviceState *dev,BusState *bus); +DeviceState *qdev_get_bus_device (const DeviceState *dev); +extern bool qdev_hotplug;extern bool qdev_hot_removed;
PATCH 2/2 virtio-balloon: Reject qmp_balloon during hot-unplug
In reply to Julia SuvorovaHot-unplug takes some time due to communication with the guest. Do not change the device while freeing up resources.
--- balloon.c | 2 +- hw/virtio/virtio-balloon.c | 9 ++++++++- include/sysemu/balloon.h | 2 +- 3 files changed, 10 insertions(+), 3 deletions(-)
balloon.c +1 -1
@@ -119,5 +119,5 @@ void qmp_balloon(int64_t target, Error **errp) }trace_balloon_event (balloon_opaque, target); -balloon_event_fn (balloon_opaque, target); +balloon_event_fn (balloon_opaque, target, errp); }
hw/virtio/virtio-balloon.c +8 -1
@@ -717,12 +717,19 @@ static void virtio_balloon_stat(void *opaque, BalloonInfo *info) VIRTIO_BALLOON_PFN_SHIFT); } -static void virtio_balloon_to_target (void *opaque,ram_addr_t target) +static void virtio_balloon_to_target (void *opaque,ram_addr_t target, +Error **errp) { +DeviceState *bus_dev =qdev_get_bus_device (DEVICE (opaque));VirtIOBalloon *dev =VIRTIO_BALLOON (opaque);VirtIODevice *vdev =VIRTIO_DEVICE (dev);ram_addr_t vm_ram_size =get_current_ram_size (); +if (bus_dev && bus_dev->pending_deleted_event) { +error_setg (errp,"Hot-unplug of %s is in progress" , vdev->name); +return ; + } +if (target > vm_ram_size) { target = vm_ram_size; }
include/sysemu/balloon.h +1 -1
@@ -17,7 +17,7 @@#include "exec/cpu-common.h" #include "qapi/qapi-types-misc.h" -typedef void (QEMUBalloonEvent )(void *opaque,ram_addr_t target); +typedef void (QEMUBalloonEvent )(void *opaque,ram_addr_t target,Error **errp);typedef void (QEMUBalloonStatus )(void *opaque,BalloonInfo *info); int qemu_add_balloon_handler(QEMUBalloonEvent *event_func,
Signature · 1 line
2.24.1
Quoted 33 lines · Julia Suvorova
Hot-unplug takes some time due to communication with the guest. Do not change the device while freeing up resources.
Signed-off-by Julia Suvorova <[email protected]>--- balloon.c | 2 +- hw/virtio/virtio-balloon.c | 9 ++++++++- include/sysemu/balloon.h | 2 +- 3 files changed, 10 insertions(+), 3 deletions(-)balloon.c +1
-1@@ -119,5 +119,5 @@ void qmp_balloon(int64_t target, Error **errp) }trace_balloon_event (balloon_opaque, target); -balloon_event_fn (balloon_opaque, target); +balloon_event_fn (balloon_opaque, target, errp); }hw/virtio/virtio-balloon.c +2
-1@@ -717,12 +717,19 @@ static void virtio_balloon_stat(void *opaque, BalloonInfo *info) VIRTIO_BALLOON_PFN_SHIFT); } -static void virtio_balloon_to_target (void *opaque,ram_addr_t target) +static void virtio_balloon_to_target (void *opaque,ram_addr_t target, +Error **errp) {
hw/virtio/virtio-balloon.c static void virtio_balloon_stat(void *opaque, BalloonInfo *info) · line 732
Quoted 10 lines
hw/virtio/virtio-balloon.c +6
-0+DeviceState *bus_dev =qdev_get_bus_device (DEVICE (opaque));VirtIOBalloon *dev =VIRTIO_BALLOON (opaque);VirtIODevice *vdev =VIRTIO_DEVICE (dev);ram_addr_t vm_ram_size =get_current_ram_size (); +if (bus_dev && bus_dev->pending_deleted_event) { +error_setg (errp,"Hot-unplug of %s is in progress" , vdev->name); +return ; + } +
How exactly does this help? The guest is free to inflate/deflate whenever it wants.
Signature · 3 lines
Thanks, David / dhildenb
Quoted 40 lines · David Hildenbrand
Quoted 38 lines · Julia Suvorova
Hot-unplug takes some time due to communication with the guest. Do not change the device while freeing up resources.
Signed-off-by Julia Suvorova <[email protected]>--- balloon.c | 2 +- hw/virtio/virtio-balloon.c | 9 ++++++++- include/sysemu/balloon.h | 2 +- 3 files changed, 10 insertions(+), 3 deletions(-)balloon.c +1
-1@@ -119,5 +119,5 @@ void qmp_balloon(int64_t target, Error **errp) }trace_balloon_event (balloon_opaque, target); -balloon_event_fn (balloon_opaque, target); +balloon_event_fn (balloon_opaque, target, errp); }hw/virtio/virtio-balloon.c +3
-1@@ -717,12 +717,19 @@ static void virtio_balloon_stat(void *opaque, BalloonInfo *info) VIRTIO_BALLOON_PFN_SHIFT); } -static void virtio_balloon_to_target (void *opaque,ram_addr_t target) +static void virtio_balloon_to_target (void *opaque,ram_addr_t target, +Error **errp) { +DeviceState *bus_dev =qdev_get_bus_device (DEVICE (opaque));VirtIOBalloon *dev =VIRTIO_BALLOON (opaque);VirtIODevice *vdev =VIRTIO_DEVICE (dev);ram_addr_t vm_ram_size =get_current_ram_size ();
Quoted 8 lines
hw/virtio/virtio-balloon.c static void virtio_balloon_stat(void *opaque, BalloonInfo *info) · line 732
Quoted 5 lines
hw/virtio/virtio-balloon.c +5
-0+if (bus_dev && bus_dev->pending_deleted_event) { +error_setg (errp,"Hot-unplug of %s is in progress" , vdev->name); +return ; + } +How exactly does this help? The guest is free to inflate/deflate whenever it wants.
Guest is aware of hot-unplug start, and virtio driver should not initiate any operations. This patch just restricts issuing commands from qmp monitor.
Best regards, Julia Suvorova.
Quoted 50 lines · Julia Suvorova
Quoted 40 lines · David Hildenbrand
Quoted 38 lines · Julia Suvorova
Hot-unplug takes some time due to communication with the guest. Do not change the device while freeing up resources.
Signed-off-by Julia Suvorova <[email protected]>--- balloon.c | 2 +- hw/virtio/virtio-balloon.c | 9 ++++++++- include/sysemu/balloon.h | 2 +- 3 files changed, 10 insertions(+), 3 deletions(-)balloon.c +1
-1@@ -119,5 +119,5 @@ void qmp_balloon(int64_t target, Error **errp) }trace_balloon_event (balloon_opaque, target); -balloon_event_fn (balloon_opaque, target); +balloon_event_fn (balloon_opaque, target, errp); }hw/virtio/virtio-balloon.c +3
-1@@ -717,12 +717,19 @@ static void virtio_balloon_stat(void *opaque, BalloonInfo *info) VIRTIO_BALLOON_PFN_SHIFT); } -static void virtio_balloon_to_target (void *opaque,ram_addr_t target) +static void virtio_balloon_to_target (void *opaque,ram_addr_t target, +Error **errp) { +DeviceState *bus_dev =qdev_get_bus_device (DEVICE (opaque));VirtIOBalloon *dev =VIRTIO_BALLOON (opaque);VirtIODevice *vdev =VIRTIO_DEVICE (dev);ram_addr_t vm_ram_size =get_current_ram_size ();Quoted 8 lines
hw/virtio/virtio-balloon.c static void virtio_balloon_stat(void *opaque, BalloonInfo *info) · line 732
Quoted 5 lines
hw/virtio/virtio-balloon.c +5
-0+if (bus_dev && bus_dev->pending_deleted_event) { +error_setg (errp,"Hot-unplug of %s is in progress" , vdev->name); +return ; + } +How exactly does this help? The guest is free to inflate/deflate whenever it wants.
Quoted 3 lines
Guest is aware of hot-unplug start, and virtio driver should not initiate any operations. This patch just restricts issuing commands from qmp monitor.
Why shouldn't the guest driver inflate/deflate while memory hotplug is going on?
Simple balloon compaction in a Linux guest -> deflate/inflate triggered in the hypervisor.
Signature · 3 lines
Thanks, David / dhildenb
Quoted 56 lines · David Hildenbrand
Quoted 50 lines · Julia Suvorova
Quoted 40 lines · David Hildenbrand
Quoted 38 lines · Julia Suvorova
Hot-unplug takes some time due to communication with the guest. Do not change the device while freeing up resources.
Signed-off-by Julia Suvorova <[email protected]>--- balloon.c | 2 +- hw/virtio/virtio-balloon.c | 9 ++++++++- include/sysemu/balloon.h | 2 +- 3 files changed, 10 insertions(+), 3 deletions(-)balloon.c +1
-1@@ -119,5 +119,5 @@ void qmp_balloon(int64_t target, Error **errp) }trace_balloon_event (balloon_opaque, target); -balloon_event_fn (balloon_opaque, target); +balloon_event_fn (balloon_opaque, target, errp); }hw/virtio/virtio-balloon.c +3
-1@@ -717,12 +717,19 @@ static void virtio_balloon_stat(void *opaque, BalloonInfo *info) VIRTIO_BALLOON_PFN_SHIFT); } -static void virtio_balloon_to_target (void *opaque,ram_addr_t target) +static void virtio_balloon_to_target (void *opaque,ram_addr_t target, +Error **errp) { +DeviceState *bus_dev =qdev_get_bus_device (DEVICE (opaque));VirtIOBalloon *dev =VIRTIO_BALLOON (opaque);VirtIODevice *vdev =VIRTIO_DEVICE (dev);ram_addr_t vm_ram_size =get_current_ram_size ();Quoted 8 lines
hw/virtio/virtio-balloon.c static void virtio_balloon_stat(void *opaque, BalloonInfo *info) · line 732
Quoted 5 lines
hw/virtio/virtio-balloon.c +5
-0+if (bus_dev && bus_dev->pending_deleted_event) { +error_setg (errp,"Hot-unplug of %s is in progress" , vdev->name); +return ; + } +How exactly does this help? The guest is free to inflate/deflate whenever it wants.
Quoted 3 lines
Guest is aware of hot-unplug start, and virtio driver should not initiate any operations. This patch just restricts issuing commands from qmp monitor.
Quoted 5 lines
Why shouldn't the guest driver inflate/deflate while memory hotplug is going on?
Simple balloon compaction in a Linux guest -> deflate/inflate triggered in the hypervisor.
QEMU crashes if inflate happens after powering-off PCI slot. Guest is unable to interact with virtio-balloon device then, driver is unloaded. But inflate can still happen if initiated from qmp.
Best regards, Julia Suvorova.
Quoted 60 lines · Julia Suvorova
Quoted 59 lines · David Hildenbrand
Quoted 50 lines · Julia Suvorova
Quoted 40 lines · David Hildenbrand
Quoted 38 lines · Julia Suvorova
Hot-unplug takes some time due to communication with the guest. Do not change the device while freeing up resources.
Signed-off-by Julia Suvorova <[email protected]>--- balloon.c | 2 +- hw/virtio/virtio-balloon.c | 9 ++++++++- include/sysemu/balloon.h | 2 +- 3 files changed, 10 insertions(+), 3 deletions(-)balloon.c +1
-1@@ -119,5 +119,5 @@ void qmp_balloon(int64_t target, Error **errp) }trace_balloon_event (balloon_opaque, target); -balloon_event_fn (balloon_opaque, target); +balloon_event_fn (balloon_opaque, target, errp); }hw/virtio/virtio-balloon.c +3
-1@@ -717,12 +717,19 @@ static void virtio_balloon_stat(void *opaque, BalloonInfo *info) VIRTIO_BALLOON_PFN_SHIFT); } -static void virtio_balloon_to_target (void *opaque,ram_addr_t target) +static void virtio_balloon_to_target (void *opaque,ram_addr_t target, +Error **errp) { +DeviceState *bus_dev =qdev_get_bus_device (DEVICE (opaque));VirtIOBalloon *dev =VIRTIO_BALLOON (opaque);VirtIODevice *vdev =VIRTIO_DEVICE (dev);ram_addr_t vm_ram_size =get_current_ram_size ();Quoted 8 lines
hw/virtio/virtio-balloon.c static void virtio_balloon_stat(void *opaque, BalloonInfo *info) · line 732
Quoted 5 lines
hw/virtio/virtio-balloon.c +5
-0+if (bus_dev && bus_dev->pending_deleted_event) { +error_setg (errp,"Hot-unplug of %s is in progress" , vdev->name); +return ; + } +How exactly does this help? The guest is free to inflate/deflate whenever it wants.
Quoted 3 lines
Guest is aware of hot-unplug start, and virtio driver should not initiate any operations. This patch just restricts issuing commands from qmp monitor.
Why shouldn't the guest driver inflate/deflate while memory hotplug is going on?
Quoted 6 lines
Quoted 2 lines
Simple balloon compaction in a Linux guest -> deflate/inflate triggered in the hypervisor.
QEMU crashes if inflate happens after powering-off PCI slot. Guest is unable to interact with virtio-balloon device then, driver is unloaded. But inflate can still happen if initiated from qmp.
Ah guest can inflate/deflate whenever it wants. What am I missing?
IMHO, the right approach is to discard inflate/deflate requests on these areas instead.
Signature · 3 lines
Thanks, David / dhildenb
Quoted 60 lines · Julia Suvorova
Quoted 59 lines · David Hildenbrand
Quoted 50 lines · Julia Suvorova
Quoted 40 lines · David Hildenbrand
Quoted 38 lines · Julia Suvorova
Hot-unplug takes some time due to communication with the guest. Do not change the device while freeing up resources.
Signed-off-by Julia Suvorova <[email protected]>--- balloon.c | 2 +- hw/virtio/virtio-balloon.c | 9 ++++++++- include/sysemu/balloon.h | 2 +- 3 files changed, 10 insertions(+), 3 deletions(-)balloon.c +1
-1@@ -119,5 +119,5 @@ void qmp_balloon(int64_t target, Error **errp) }trace_balloon_event (balloon_opaque, target); -balloon_event_fn (balloon_opaque, target); +balloon_event_fn (balloon_opaque, target, errp); }hw/virtio/virtio-balloon.c +3
-1@@ -717,12 +717,19 @@ static void virtio_balloon_stat(void *opaque, BalloonInfo *info) VIRTIO_BALLOON_PFN_SHIFT); } -static void virtio_balloon_to_target (void *opaque,ram_addr_t target) +static void virtio_balloon_to_target (void *opaque,ram_addr_t target, +Error **errp) { +DeviceState *bus_dev =qdev_get_bus_device (DEVICE (opaque));VirtIOBalloon *dev =VIRTIO_BALLOON (opaque);VirtIODevice *vdev =VIRTIO_DEVICE (dev);ram_addr_t vm_ram_size =get_current_ram_size ();Quoted 8 lines
hw/virtio/virtio-balloon.c static void virtio_balloon_stat(void *opaque, BalloonInfo *info) · line 732
Quoted 5 lines
hw/virtio/virtio-balloon.c +5
-0+if (bus_dev && bus_dev->pending_deleted_event) { +error_setg (errp,"Hot-unplug of %s is in progress" , vdev->name); +return ; + } +How exactly does this help? The guest is free to inflate/deflate whenever it wants.
Quoted 3 lines
Guest is aware of hot-unplug start, and virtio driver should not initiate any operations. This patch just restricts issuing commands from qmp monitor.
Why shouldn't the guest driver inflate/deflate while memory hotplug is going on?
Quoted 8 lines
Quoted 2 lines
Simple balloon compaction in a Linux guest -> deflate/inflate triggered in the hypervisor.
QEMU crashes if inflate happens after powering-off PCI slot. Guest is unable to interact with virtio-balloon device then, driver is unloaded. But inflate can still happen if initiated from qmp.
Best regards, Julia Suvorova.
Hot-unplug in progress is probably a hack - we should prevent access when device is powered off.
Also, it would appear that have_balloon is the correct place for this kind of check.
Signature · 1 line
MST
Quoted 69 lines · Michael S. Tsirkin
Quoted 67 lines · Julia Suvorova
Quoted 56 lines · David Hildenbrand
Quoted 50 lines · Julia Suvorova
Quoted 40 lines · David Hildenbrand
Quoted 38 lines · Julia Suvorova
Hot-unplug takes some time due to communication with the guest. Do not change the device while freeing up resources.
Signed-off-by Julia Suvorova <[email protected]>--- balloon.c | 2 +- hw/virtio/virtio-balloon.c | 9 ++++++++- include/sysemu/balloon.h | 2 +- 3 files changed, 10 insertions(+), 3 deletions(-)balloon.c +1
-1@@ -119,5 +119,5 @@ void qmp_balloon(int64_t target, Error **errp) }trace_balloon_event (balloon_opaque, target); -balloon_event_fn (balloon_opaque, target); +balloon_event_fn (balloon_opaque, target, errp); }hw/virtio/virtio-balloon.c +3
-1@@ -717,12 +717,19 @@ static void virtio_balloon_stat(void *opaque, BalloonInfo *info) VIRTIO_BALLOON_PFN_SHIFT); } -static void virtio_balloon_to_target (void *opaque,ram_addr_t target) +static void virtio_balloon_to_target (void *opaque,ram_addr_t target, +Error **errp) { +DeviceState *bus_dev =qdev_get_bus_device (DEVICE (opaque));VirtIOBalloon *dev =VIRTIO_BALLOON (opaque);VirtIODevice *vdev =VIRTIO_DEVICE (dev);ram_addr_t vm_ram_size =get_current_ram_size ();Quoted 8 lines
hw/virtio/virtio-balloon.c static void virtio_balloon_stat(void *opaque, BalloonInfo *info) · line 732
Quoted 5 lines
hw/virtio/virtio-balloon.c +5
-0+if (bus_dev && bus_dev->pending_deleted_event) { +error_setg (errp,"Hot-unplug of %s is in progress" , vdev->name); +return ; + } +How exactly does this help? The guest is free to inflate/deflate whenever it wants.
Quoted 3 lines
Guest is aware of hot-unplug start, and virtio driver should not initiate any operations. This patch just restricts issuing commands from qmp monitor.
Quoted 5 lines
Why shouldn't the guest driver inflate/deflate while memory hotplug is going on?
Simple balloon compaction in a Linux guest -> deflate/inflate triggered in the hypervisor.
QEMU crashes if inflate happens after powering-off PCI slot. Guest is unable to interact with virtio-balloon device then, driver is unloaded. But inflate can still happen if initiated from qmp.
Quoted 6 lines
Quoted 1 line
Best regards, Julia Suvorova.
Hot-unplug in progress is probably a hack - we should prevent access when device is powered off.
Also, it would appear thathave_balloonis the correct place for this kind of check.
You're right, it is a hack. I can add another handler to check if device is powered on, and check it in have_balloon(), In assumption that have_balloon means than we can use balloon when it's presented, it is fine. But it will get more complicated once hidden devices are here.
Best regards, Julia Suvorova.
Quoted 77 lines · Julia Suvorova
Quoted 69 lines · Michael S. Tsirkin
Quoted 67 lines · Julia Suvorova
Quoted 56 lines · David Hildenbrand
Quoted 50 lines · Julia Suvorova
Quoted 40 lines · David Hildenbrand
Quoted 38 lines · Julia Suvorova
Hot-unplug takes some time due to communication with the guest. Do not change the device while freeing up resources.
Signed-off-by Julia Suvorova <[email protected]>--- balloon.c | 2 +- hw/virtio/virtio-balloon.c | 9 ++++++++- include/sysemu/balloon.h | 2 +- 3 files changed, 10 insertions(+), 3 deletions(-)balloon.c +1
-1@@ -119,5 +119,5 @@ void qmp_balloon(int64_t target, Error **errp) }trace_balloon_event (balloon_opaque, target); -balloon_event_fn (balloon_opaque, target); +balloon_event_fn (balloon_opaque, target, errp); }hw/virtio/virtio-balloon.c +3
-1@@ -717,12 +717,19 @@ static void virtio_balloon_stat(void *opaque, BalloonInfo *info) VIRTIO_BALLOON_PFN_SHIFT); } -static void virtio_balloon_to_target (void *opaque,ram_addr_t target) +static void virtio_balloon_to_target (void *opaque,ram_addr_t target, +Error **errp) { +DeviceState *bus_dev =qdev_get_bus_device (DEVICE (opaque));VirtIOBalloon *dev =VIRTIO_BALLOON (opaque);VirtIODevice *vdev =VIRTIO_DEVICE (dev);ram_addr_t vm_ram_size =get_current_ram_size ();Quoted 8 lines
hw/virtio/virtio-balloon.c static void virtio_balloon_stat(void *opaque, BalloonInfo *info) · line 732
Quoted 5 lines
hw/virtio/virtio-balloon.c +5
-0+if (bus_dev && bus_dev->pending_deleted_event) { +error_setg (errp,"Hot-unplug of %s is in progress" , vdev->name); +return ; + } +How exactly does this help? The guest is free to inflate/deflate whenever it wants.
Quoted 3 lines
Guest is aware of hot-unplug start, and virtio driver should not initiate any operations. This patch just restricts issuing commands from qmp monitor.
Quoted 5 lines
Why shouldn't the guest driver inflate/deflate while memory hotplug is going on?
Simple balloon compaction in a Linux guest -> deflate/inflate triggered in the hypervisor.
QEMU crashes if inflate happens after powering-off PCI slot. Guest is unable to interact with virtio-balloon device then, driver is unloaded. But inflate can still happen if initiated from qmp.
Quoted 6 lines
Quoted 1 line
Best regards, Julia Suvorova.
Hot-unplug in progress is probably a hack - we should prevent access when device is powered off.
Also, it would appear thathave_balloonis the correct place for this kind of check.
Quoted 7 lines
You're right, it is a hack. I can add another handler to check if device is powered on, and check it in
have_balloon(), In assumption thathave_balloonmeans than we can use balloon when it's presented, it is fine. But it will get more complicated once hidden devices are here.Best regards, Julia Suvorova.
So thinking about it, all we need to do is make sure powered off devices don't send interrupts via msi or intx. Changing config space should be fine ... No?
Signature · 1 line
MST