tpm2-pkcs11 and certificates, also Linux Networking
s.schwebel at uvensys.de
Hello again,
Ive been trying for some time now to get this Linux machine to connect to a 802.1 Network, that is client certificates
As far as I can tell, that means using PKCS11, that seems to be supported in wpa_suplicant at least.
Ive found a version of NetworkManager that seems to access TPM2 via tpm2-tss -> https://gitlab.freedesktop.org/apatard/NetworkManager
but I cannot provided a custom build Networkmanager for users.
So, I try to use pcks11, which works fine up to the point where I have to import the signed cert into the store. I think I need to do that, at least.
My steps:
1) create storetpm2_ptool init
2) create tokentpm2_ptool addtoken --pid=1 --label=soveryimportant --sopin=123123 --userpin=456456
Now, I can create Keys and I tested pretty much any way I know of
3) create keytpm2_ptool addkey --label=soveryimportant --userpin=456456 --algorithm=rsa2048
p11tool --login --generate-rsa --bits=2048 --label=soveryimportant "pkcs11:model=;manufacturer=STMicro;serial=0000000000000000;token=soveryimportant"
and whatever the syntax of pkcs11-tool is, I tried that as well
I can generate a CSR just fine
openssl req -new -engine pkcs11 -keyform engine -key "$url" -out cert.csr
Adding the cert fails in a million ways:
tpm2pkcs11-tool -w hardware.crt -y cert
Using slot 0 with a present token (0x1)
error: PKCS11 function C_CreateObject failed: rv = CKR_FUNCTION_NOT_SUPPORTED (0x54)
p11tool just hangs..
p11tool --login --write "pkcs11:model=;manufacturer=STMicro;serial=0000000000000000;token=soveryimortant" --load-certificate hardware.crt --label "soveryimportant"
/tpm2_ptool addcert --label soveryimportant --key-id "f2:be:d0:ab:c3:81:72:8a:b5:40:69:31:d1:38:28:8c:9d:bb:ee:9e" /home/steffenschwebel/Projects/PKI_network/hardware.crt
Traceback (most recent call last):
File "/usr/lib/python3/dist-packages/pyasn1/type/constraint.py", line 32, in __call__
self._testValue(value, idx)
File "/usr/lib/python3/dist-packages/pyasn1/type/constraint.py", line 297, in _testValue
raise error.ValueConstraintError(value)
pyasn1.type.error.ValueConstraintError: Extensions:
Any help?
I'll now try to get it working without having the cert in the store, only the key
regards,
Steffen Schwebel
nicolasoliver03 at gmail.com
Hi Steffen,
In our side, we were able to get wpa_supplicant, tpm2_pkcs11, and EAP-TLS to authenticate a device in a corporate network. It requires a wireless AP or router that supports EAP-TLS, and a Radius server for auth.
There is a thread in this mailing list about that here https://lists.01.org/hyperkitty/list/tpm2(a)lists.01.org/thread/AYUBCAFCCXITEVSWA4IFC466LYS6ZIYX/
There are also commits in tpm2-pkcs11 to enable support for wpa_supplicant https://github.com/tpm2-software/tpm2-pkcs11/pull/366
Steffen Schwebel
Hi,
I managed to get that working as well.
I also asked at NetworkManager and wpa_supplicant mailing list.
Seems that NM has support for tpm2-tss at versions > 1.20 Not sure yet about wpa_supplicant.
Since I couldnt store the client cert via PKCS11, I point wpa_supplicant to a file on disk
client_cert="/home/steffenschwebel/Projects/PKI_network/hardware.crt" private_key="pkcs11:model=;manufacturer=STMicro;serial=0000000000000000;token=soveryimportant;id=%F2%BE%D0%AB%C3%81%72%8A%B5%40%69%31%D1%38%28%8C%9D%BB%EE%9E;object=klarna;type=private" pin="456456"
regards,
Steffen
Quoted 11 lines · On 1/16/20 7:49 PM, nicolasoliver03(a)gmail.com wrote:
Hi Steffen,
In our side, we were able to get
wpa_supplicant,tpm2_pkcs11, and EAP-TLS to authenticate a device in a corporate network. It requires a wireless AP or router that supports EAP-TLS, and a Radius server for auth.There is a thread in this mailing list about that here https://lists.01.org/hyperkitty/list/tpm2(a)lists.01.org/thread/AYUBCAFCCXITEVSWA4IFC466LYS6ZIYX/
There are also commits in tpm2-pkcs11 to enable support forwpa_supplicanthttps://github.com/tpm2-software/tpm2-pkcs11/pull/366
_______________________________________________
tpm2 mailing list -- tpm2(a)lists.01.org
To unsubscribe send an email to tpm2-leave(a)lists.01.org
%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s
Roberts
Quoted 12 lines
-----Original Message-----
From: Steffen Schwebel [mailto:s.schwebel(a)uvensys.de]
Sent: Thursday, January 16, 2020 1:02 PM
To: tpm2(a)lists.01.org >> tpm2 <tpm2(a)lists.01.org>
Subject: [tpm2] Re: tpm2-pkcs11 and certificates, also Linux NetworkingHi,
I managed to get that working as well.
Quoted 7 lines
I also asked at NetworkManager and
wpa_supplicantmailing list.Seems that NM has support for tpm2-tss at versions > 1.20 Not sure yet about
wpa_supplicant.Since I couldnt store the client cert via PKCS11, I point
wpa_supplicantto a file on disk
You should be able to now via tpm2_ptool addcert on the master branch. I have that Feature heading for v1.1.
Quoted 34 lines
client_cert="/home/steffenschwebel/Projects/PKI_network/hardware.crt" private_key="pkcs11:model=;manufacturer=STMicro;serial=0000000000000000;t oken=soveryimportant;id=%F2%BE%D0%AB%C3%81%72%8A%B5%40%69%31%D 1%38%28%8C%9D%BB%EE%9E;object=klarna;type=private" pin="456456"
regards,
SteffenQuoted 3 lines · On 1/16/20 7:49 PM, nicolasoliver03(a)gmail.com wrote:
Hi Steffen,
In our side, we were able to get
wpa_supplicant,tpm2_pkcs11, and EAP-TLS toauthenticate a device in a corporate network.
Quoted 1 line
It requires a wireless AP or router that supports EAP-TLS, and a Radius server
for auth.
Quoted 10 lines
There is a thread in this mailing list about that here
https://lists.01.org/hyperkitty/list/tpm2(a)lists.01.org/thread/AYUBCAFC
CXITEVSWA4IFC466LYS6ZIYX/ There are also commits in tpm2-pkcs11 to enable support forwpa_supplicant
https://github.com/tpm2-software/tpm2-pkcs11/pull/366
_______________________________________________
tpm2 mailing list -- tpm2(a)lists.01.org To unsubscribe send an email to tpm2-leave(a)lists.01.org %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s_______________________________________________
tpm2 mailing list -- tpm2(a)lists.01.org
To unsubscribe send an email to tpm2-leave(a)lists.01.org %(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s
s.schwebel at uvensys.de
Hello,
yes, "should" :)
I was just about to open an issue on github when I tried it again this morning.
For some reason it worked
steffenschwebel(a)ubuntu:/opt/tpm2-pkcs11/tools$ ./tpm2_ptool addcert --label soveryimportant /home/steffenschwebel/Projects/PKI_network/hardware.crt --key-label soveryimportant action: add cert: CKA_ID: f2bed0abc381728ab5406931d138288c9dbbee9e
But I have other problems with that now. If I try to list-all I just hangs. And I cant use the certificate URL via wpa_supplicant
Not sure how to debug this further..