Take SST-only branch device into account
Subsystems (2)
v2 cover Take SST-only branch device into account
Noticed this while testing 4 ports MST hub from StarTech.com. While plugging in and display a MST monitor(Dell U2417H), change the MST feature to off from OSD. Monitor then can't display anymore.
After analyzing, found out that the CSN reports the specific port from Device with MST Branching Unit (Message_Capability_Status=1 && Peer_Device_Type=010) to SST-only Branch Device ((Message_Capability_Status=0 && Peer_Device_Type=010). Current code expects peer device as MST branch device and can handle sideband message once the peer device type is declared as Peer_Device_Type=010. But for SST-only Branch Device, its Peer_Device_Type is 010 and can't handle sideband message. For this case, we should follow the same handling procedure as the case in DP_PEER_DEVICE_DP_LEGACY_CONV & DP_PEER_DEVICE_SST_SINK.
This patch is trying to add the SST-only branch device case in and remain the original processing logic in current code.
Changes since v1:(https://patchwork.kernel.org/cover/11323075/)
* Squash previous two patches into one patch
* Combine if statements to have code cleaner
Wayne Lin (1):
drm/dp_mst: Handle SST-only branch device case
drivers/gpu/drm/drm_dp_mst_topology.c | 140 +++++++++++++++----------- 1 file changed, 80 insertions(+), 60 deletions(-)
Signature · 6 lines
2.17.1 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
PATCH v2 1/1 drm/dp_mst: Handle SST-only branch device case
[Why]
While handling LINK_ADDRESS reply, current code expects a peer device can handle sideband message once the peer device type is reported as DP_PEER_DEVICE_MST_BRANCHING. However, when the connected device is a SST branch case, it can't handle the sideband message(MST_CAP=0 in DPCD 00021h).
Current code will try to send LINK_ADDRESS to SST branch device and end up with message timeout and monitor can't display normally. As the result of that, we should take SST branch device into account.
[How]
According to DP 1.4 spec, we can use Peer_Device_Type as DP_PEER_DEVICE_MST_BRANCHING and Message_Capability_Status as 0 to indicate peer device as a SST-only branch device.
Fix following:
- Add the function drm_dp_mst_is_dp_mst_end_device() to decide whether a peer device connected to a DFP is mst end device. Which also indicates if the peer device is capable of handling message or not.
- Take SST-only branch device case into account in drm_dp_port_set_pdt() and add a new parameter 'new_mcs'. Take sst branch device case as the same case as DP_PEER_DEVICE_DP_LEGACY_CONV and DP_PEER_DEVICE_SST_SINK. All original handling logics remain.
- Take SST-only branch device case into account in drm_dp_mst_port_add_connector().
- Fix some parts in drm_dp_mst_handle_link_address_port() to have SST branch device case into consideration.
- Fix the arguments of drm_dp_port_set_pdt() in drm_dp_mst_handle_conn_stat().
- Have SST branch device also report connector_status_connected when the ddps is true
in drm_dp_mst_detect_port()
- Fix the arguments of drm_dp_port_set_pdt() in drm_dp_delayed_destroy_port()
Changes since v1:(https://patchwork.kernel.org/patch/11323079/)
* Squash previous patch into one patch and merge the commit message here.
* Combine the if statements mentioned in comments
--- drivers/gpu/drm/drm_dp_mst_topology.c | 140 +++++++++++++++----------- 1 file changed, 80 insertions(+), 60 deletions(-)
drivers/gpu/drm/drm_dp_mst_topology.c +80 -60
@@ -1914,73 +1914,90 @@ static u8 drm_dp_calculate_rad(struct drm_dp_mst_port *port,return parent_lct +1 ; } -static int drm_dp_port_set_pdt (struct drm_dp_mst_port *port,u8 new_pdt) +static bool drm_dp_mst_is_dp_mst_end_device (u8 pdt,bool mcs) +{ +switch (pdt) { +case DP_PEER_DEVICE_DP_LEGACY_CONV : +case DP_PEER_DEVICE_SST_SINK : +return true; +case DP_PEER_DEVICE_MST_BRANCHING : +/* For sst branch device */ +if (!mcs) +return true; + +return false; + } +return true; +} + +static int +drm_dp_port_set_pdt (struct drm_dp_mst_port *port,u8 new_pdt, +bool new_mcs) {struct drm_dp_mst_topology_mgr *mgr = port->mgr;struct drm_dp_mst_branch *mstb;u8 rad[8 ], lct;int ret =0 ; -if (port->pdt == new_pdt) +if (port->pdt == new_pdt && port->mcs == new_mcs)return 0 ;/* Teardown the old pdt, if there is one */ -switch (port->pdt) { -case DP_PEER_DEVICE_DP_LEGACY_CONV : -case DP_PEER_DEVICE_SST_SINK : -/* -* If the new PDT would also have an i2c bus, don't bother -* with reregistering it -*/ -if (new_pdt ==DP_PEER_DEVICE_DP_LEGACY_CONV || - new_pdt ==DP_PEER_DEVICE_SST_SINK ) { - port->pdt = new_pdt; -return 0 ; - } +if (port->pdt !=DP_PEER_DEVICE_NONE ) { +if (drm_dp_mst_is_dp_mst_end_device (port->pdt, port->mcs)) { +/* +* If the new PDT would also have an i2c bus, +* don't bother with reregistering it +*/ +if (new_pdt !=DP_PEER_DEVICE_NONE && +drm_dp_mst_is_dp_mst_end_device (new_pdt, new_mcs)) { + port->pdt = new_pdt; + port->mcs = new_mcs; +return 0 ; + } -/* remove i2c over sideband */ -drm_dp_mst_unregister_i2c_bus (&port->aux); -break ; -case DP_PEER_DEVICE_MST_BRANCHING : -mutex_lock (&mgr->lock); -drm_dp_mst_topology_put_mstb (port->mstb); - port->mstb =NULL ; -mutex_unlock (&mgr->lock); -break ; +/* remove i2c over sideband */ +drm_dp_mst_unregister_i2c_bus (&port->aux); + }else { +mutex_lock (&mgr->lock); +drm_dp_mst_topology_put_mstb (port->mstb); + port->mstb =NULL ; +mutex_unlock (&mgr->lock); + } } port->pdt = new_pdt; -switch (port->pdt) { -case DP_PEER_DEVICE_DP_LEGACY_CONV : -case DP_PEER_DEVICE_SST_SINK : -/* add i2c over sideband */ - ret =drm_dp_mst_register_i2c_bus (&port->aux); -break ; + port->mcs = new_mcs; -case DP_PEER_DEVICE_MST_BRANCHING : - lct =drm_dp_calculate_rad (port, rad); - mstb =drm_dp_add_mst_branch_device (lct, rad); -if (!mstb) { - ret = -ENOMEM ; -DRM_ERROR ("Failed to create MSTB for port %p" , port); - goto out; - } +if (port->pdt !=DP_PEER_DEVICE_NONE ) { +if (drm_dp_mst_is_dp_mst_end_device (port->pdt, port->mcs)) { +/* add i2c over sideband */ + ret =drm_dp_mst_register_i2c_bus (&port->aux); + }else { + lct =drm_dp_calculate_rad (port, rad); + mstb =drm_dp_add_mst_branch_device (lct, rad); +if (!mstb) { + ret = -ENOMEM ; +DRM_ERROR ("Failed to create MSTB for port %p" , + port); + goto out; + } -mutex_lock (&mgr->lock); - port->mstb = mstb; - mstb->mgr = port->mgr; - mstb->port_parent = port; +mutex_lock (&mgr->lock); + port->mstb = mstb; + mstb->mgr = port->mgr; + mstb->port_parent = port; -/* -* Make sure this port's memory allocation stays -* around until its child MSTB releases it -*/ -drm_dp_mst_get_port_malloc (port); -mutex_unlock (&mgr->lock); +/* +* Make sure this port's memory allocation stays +* around until its child MSTB releases it +*/ +drm_dp_mst_get_port_malloc (port); +mutex_unlock (&mgr->lock); -/* And make sure we send a link address for this */ - ret =1 ; -break ; +/* And make sure we send a link address for this */ + ret =1 ; + } } out:
@@ -2133,9 +2150,8 @@ drm_dp_mst_port_add_connector(struct drm_dp_mst_branch *mstb, goto error; } -if ((port->pdt ==DP_PEER_DEVICE_DP_LEGACY_CONV || - port->pdt ==DP_PEER_DEVICE_SST_SINK ) && - port->port_num >=DP_MST_LOGICAL_PORT_0 ) { +if (port->pdt !=DP_PEER_DEVICE_NONE && +drm_dp_mst_is_dp_mst_end_device (port->pdt, port->mcs)) { port->cached_edid =drm_get_edid (port->connector, &port->aux.ddc);drm_connector_set_tile_property (port->connector);
@@ -2203,6 +2219,7 @@ drm_dp_mst_handle_link_address_port(struct drm_dp_mst_branch *mstb,struct drm_dp_mst_port *port;int old_ddps =0 , ret;u8 new_pdt =DP_PEER_DEVICE_NONE ; +bool new_mcs =0 ;bool created = false, send_link_addr = false, changed = false; port =drm_dp_get_port (mstb, port_msg->port_number);
@@ -2247,7 +2264,7 @@ drm_dp_mst_handle_link_address_port(struct drm_dp_mst_branch *mstb, port->input = port_msg->input_port;if (!port->input) new_pdt = port_msg->peer_device_type; - port->mcs = port_msg->mcs; + new_mcs = port_msg->mcs; port->ddps = port_msg->ddps; port->ldps = port_msg->legacy_device_plug_status; port->dpcd_rev = port_msg->dpcd_revision;
@@ -2275,7 +2292,7 @@ drm_dp_mst_handle_link_address_port(struct drm_dp_mst_branch *mstb, } } - ret =drm_dp_port_set_pdt (port, new_pdt); + ret =drm_dp_port_set_pdt (port, new_pdt, new_mcs);if (ret ==1 ) { send_link_addr = true; }else if (ret <0 ) {
@@ -2289,7 +2306,8 @@ drm_dp_mst_handle_link_address_port(struct drm_dp_mst_branch *mstb,* we're coming out of suspend. In this case, always resend the link * address if there's an MSTB on this port */ -if (!created && port->pdt ==DP_PEER_DEVICE_MST_BRANCHING ) +if (!created && port->pdt ==DP_PEER_DEVICE_MST_BRANCHING && + port->mcs) send_link_addr = true;if (port->connector)
@@ -2326,6 +2344,7 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb,struct drm_dp_mst_port *port;int old_ddps, old_input, ret, i;u8 new_pdt; +bool new_mcs;bool dowork = false, create_connector = false; port =drm_dp_get_port (mstb, conn_stat->port_number);
@@ -2357,7 +2376,6 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb, old_ddps = port->ddps; old_input = port->input; port->input = conn_stat->input_port; - port->mcs = conn_stat->message_capability_status; port->ldps = conn_stat->legacy_device_plug_status; port->ddps = conn_stat->displayport_device_plug_status;
@@ -2370,8 +2388,8 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb, } new_pdt = port->input ?DP_PEER_DEVICE_NONE : conn_stat->peer_device_type; - - ret =drm_dp_port_set_pdt (port, new_pdt); + new_mcs = conn_stat->message_capability_status; + ret =drm_dp_port_set_pdt (port, new_pdt, new_mcs);if (ret ==1 ) { dowork = true; }else if (ret <0 ) {
@@ -3938,6 +3956,8 @@ drm_dp_mst_detect_port(struct drm_connector *connector,switch (port->pdt) {case DP_PEER_DEVICE_NONE :case DP_PEER_DEVICE_MST_BRANCHING : +if (!port->mcs) + ret = connector_status_connected;break ;case DP_PEER_DEVICE_SST_SINK :
@@ -4572,7 +4592,7 @@ drm_dp_delayed_destroy_port(struct drm_dp_mst_port *port)if (port->connector) port->mgr->cbs->destroy_connector (port->mgr, port->connector); -drm_dp_port_set_pdt (port,DP_PEER_DEVICE_NONE ); +drm_dp_port_set_pdt (port,DP_PEER_DEVICE_NONE , port->mcs);drm_dp_mst_put_port_malloc (port); }
Signature · 6 lines
2.17.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Lyude Paul
AppliedRe: [PATCH v2 1/1] drm/dp_mst: Handle SST-only branch device case
Pushed to drm-misc-fixes, thanks!
Quoted 303 lines · Wayne Lin
[Why]
While handlingLINK_ADDRESSreply, current code expects a peer device can handle sideband message once the peer device type is reported asDP_PEER_DEVICE_MST_BRANCHING. However, when the connected device is a SST branch case, it can't handle the sidebandmessage(MST_CAP=0 in DPCD 00021h).Current code will try to send
LINK_ADDRESSto SST branch device and end up with message timeout and monitor can't display normally. As the result of that, we should take SST branch device into account.[How]
According to DP 1.4 spec, we can usePeer_Device_TypeasDP_PEER_DEVICE_MST_BRANCHINGandMessage_Capability_Statusas 0 to indicate peer device as a SST-only branch device.Fix following:
- Add the functiondrm_dp_mst_is_dp_mst_end_device()to decide whether a peer device connected to a DFP is mst end device. Which also indicates if the peer device is capable of handling message or not.
- Take SST-only branch device case into account indrm_dp_port_set_pdt()and add a new parameter 'new_mcs'. Take sst branch device case as the same case asDP_PEER_DEVICE_DP_LEGACY_CONVandDP_PEER_DEVICE_SST_SINK. All original handling logics remain.
- Take SST-only branch device case into account indrm_dp_mst_port_add_connector().
- Fix some parts indrm_dp_mst_handle_link_address_port()to have SST branch device case into consideration.
- Fix the arguments ofdrm_dp_port_set_pdt()indrm_dp_mst_handle_conn_stat().
- Have SST branch device also reportconnector_status_connectedwhen the ddps is true
indrm_dp_mst_detect_port()
- Fix the arguments ofdrm_dp_port_set_pdt()indrm_dp_delayed_destroy_port()Changes since v1:(https://patchwork.kernel.org/patch/11323079/)
* Squash previous patch into one patch and merge the commit message here.
* Combine the if statements mentioned in commentsFixes c485e2c97dae ("drm/dp_mst: Refactor pdt setup/teardown, add morelocking")
Cc Ville Syrjälä <[email protected]>Cc Harry Wentland <[email protected]>Cc Lyude Paul <[email protected]>Signed-off-by Wayne Lin <[email protected]>Reviewed-by Lyude Paul <[email protected]>--- drivers/gpu/drm/drm_dp_mst_topology.c | 140 +++++++++++++++----------- 1 file changed, 80 insertions(+), 60 deletions(-)drivers/gpu/drm/drm_dp_mst_topology.c +67
-50@@ -1914,73 +1914,90 @@ static u8 drm_dp_calculate_rad(structdrm_dp_mst_port *port, return parent_lct + 1; } -static int drm_dp_port_set_pdt (struct drm_dp_mst_port *port,u8 new_pdt) +static bool drm_dp_mst_is_dp_mst_end_device (u8 pdt,bool mcs) +{ +switch (pdt) { +case DP_PEER_DEVICE_DP_LEGACY_CONV : +case DP_PEER_DEVICE_SST_SINK : +return true; +case DP_PEER_DEVICE_MST_BRANCHING : +/* For sst branch device */ +if (!mcs) +return true; + +return false; + } +return true; +} + +static int +drm_dp_port_set_pdt (struct drm_dp_mst_port *port,u8 new_pdt, +bool new_mcs) {struct drm_dp_mst_topology_mgr *mgr = port->mgr;struct drm_dp_mst_branch *mstb;u8 rad[8 ], lct;int ret =0 ; -if (port->pdt == new_pdt) +if (port->pdt == new_pdt && port->mcs == new_mcs)return 0 ;/* Teardown the old pdt, if there is one */ -switch (port->pdt) { -case DP_PEER_DEVICE_DP_LEGACY_CONV : -case DP_PEER_DEVICE_SST_SINK : -/* -* If the new PDT would also have an i2c bus, don't bother -* with reregistering it -*/ -if (new_pdt ==DP_PEER_DEVICE_DP_LEGACY_CONV || - new_pdt ==DP_PEER_DEVICE_SST_SINK ) { - port->pdt = new_pdt; -return 0 ; - } +if (port->pdt !=DP_PEER_DEVICE_NONE ) { +if (drm_dp_mst_is_dp_mst_end_device (port->pdt, port->mcs)) { +/* +* If the new PDT would also have an i2c bus, +* don't bother with reregistering it +*/ +if (new_pdt !=DP_PEER_DEVICE_NONE && +drm_dp_mst_is_dp_mst_end_device (new_pdt, new_mcs)) { + port->pdt = new_pdt; + port->mcs = new_mcs; +return 0 ; + } -/* remove i2c over sideband */ -drm_dp_mst_unregister_i2c_bus (&port->aux); -break ; -case DP_PEER_DEVICE_MST_BRANCHING : -mutex_lock (&mgr->lock); -drm_dp_mst_topology_put_mstb (port->mstb); - port->mstb =NULL ; -mutex_unlock (&mgr->lock); -break ; +/* remove i2c over sideband */ +drm_dp_mst_unregister_i2c_bus (&port->aux); + }else { +mutex_lock (&mgr->lock); +drm_dp_mst_topology_put_mstb (port->mstb); + port->mstb =NULL ; +mutex_unlock (&mgr->lock); + } } port->pdt = new_pdt; -switch (port->pdt) { -case DP_PEER_DEVICE_DP_LEGACY_CONV : -case DP_PEER_DEVICE_SST_SINK : -/* add i2c over sideband */ - ret =drm_dp_mst_register_i2c_bus (&port->aux); -break ; + port->mcs = new_mcs; -case DP_PEER_DEVICE_MST_BRANCHING : - lct =drm_dp_calculate_rad (port, rad); - mstb =drm_dp_add_mst_branch_device (lct, rad); -if (!mstb) { - ret = -ENOMEM ; -DRM_ERROR ("Failed to create MSTB for port %p" , port); - goto out; - } +if (port->pdt !=DP_PEER_DEVICE_NONE ) { +if (drm_dp_mst_is_dp_mst_end_device (port->pdt, port->mcs)) { +/* add i2c over sideband */ + ret =drm_dp_mst_register_i2c_bus (&port->aux); + }else { + lct =drm_dp_calculate_rad (port, rad); + mstb =drm_dp_add_mst_branch_device (lct, rad); +if (!mstb) { + ret = -ENOMEM ; +DRM_ERROR ("Failed to create MSTB for port %p" , + port); + goto out; + } -mutex_lock (&mgr->lock); - port->mstb = mstb; - mstb->mgr = port->mgr; - mstb->port_parent = port; +mutex_lock (&mgr->lock); + port->mstb = mstb; + mstb->mgr = port->mgr; + mstb->port_parent = port; -/* -* Make sure this port's memory allocation stays -* around until its child MSTB releases it -*/ -drm_dp_mst_get_port_malloc (port); -mutex_unlock (&mgr->lock); +/* +* Make sure this port's memory allocation stays +* around until its child MSTB releases it +*/ +drm_dp_mst_get_port_malloc (port); +mutex_unlock (&mgr->lock); -/* And make sure we send a link address for this */ - ret =1 ; -break ; +/* And make sure we send a link address for this */ + ret =1 ; + } }out:
drivers/gpu/drm/drm_dp_mst_topology.c +2
-3@@ -2133,9 +2150,8 @@ drm_dp_mst_port_add_connector(struct drm_dp_mst_branch *mstb, goto error; } -if ((port->pdt ==DP_PEER_DEVICE_DP_LEGACY_CONV || - port->pdt ==DP_PEER_DEVICE_SST_SINK ) && - port->port_num >=DP_MST_LOGICAL_PORT_0 ) { +if (port->pdt !=DP_PEER_DEVICE_NONE && +drm_dp_mst_is_dp_mst_end_device (port->pdt, port->mcs)) { port->cached_edid =drm_get_edid (port->connector, &port->aux.ddc);drivers/gpu/drm/drm_dp_mst_topology.c +1
-0drm_connector_set_tile_property (port->connector);@@ -2203,6 +2219,7 @@ drm_dp_mst_handle_link_address_port(structdrm_dp_mst_branch *mstb, struct drm_dp_mst_port *port;int old_ddps =0 , ret;u8 new_pdt =DP_PEER_DEVICE_NONE ; +bool new_mcs =0 ;bool created = false, send_link_addr = false, changed = false;drivers/gpu/drm/drm_dp_mst_topology.c +1
-1port =drm_dp_get_port (mstb, port_msg->port_number);@@ -2247,7 +2264,7 @@ drm_dp_mst_handle_link_address_port(struct drm_dp_mst_branch *mstb, port->input = port_msg->input_port;if (!port->input) new_pdt = port_msg->peer_device_type; - port->mcs = port_msg->mcs; + new_mcs = port_msg->mcs; port->ddps = port_msg->ddps; port->ldps = port_msg->legacy_device_plug_status;drivers/gpu/drm/drm_dp_mst_topology.c +1
-1port->dpcd_rev = port_msg->dpcd_revision;@@ -2275,7 +2292,7 @@ drm_dp_mst_handle_link_address_port(structdrm_dp_mst_branch *mstb, } } - ret =drm_dp_port_set_pdt (port, new_pdt); + ret =drm_dp_port_set_pdt (port, new_pdt, new_mcs);if (ret ==1 ) { send_link_addr = true;drivers/gpu/drm/drm_dp_mst_topology.c +2
-1}else if (ret <0 ) {@@ -2289,7 +2306,8 @@ drm_dp_mst_handle_link_address_port(structdrm_dp_mst_branch *mstb, * we're coming out of suspend. In this case, always resend the link * address if there's an MSTB on this port */ -if (!created && port->pdt ==DP_PEER_DEVICE_MST_BRANCHING ) +if (!created && port->pdt ==DP_PEER_DEVICE_MST_BRANCHING && + port->mcs) send_link_addr = true;drivers/gpu/drm/drm_dp_mst_topology.c +1
-0if (port->connector)@@ -2326,6 +2344,7 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb, struct drm_dp_mst_port *port;int old_ddps, old_input, ret, i;u8 new_pdt; +bool new_mcs;bool dowork = false, create_connector = false;drivers/gpu/drm/drm_dp_mst_topology.c +2
-3port =drm_dp_get_port (mstb, conn_stat->port_number);@@ -2357,7 +2376,6 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb, old_ddps = port->ddps; old_input = port->input; port->input = conn_stat->input_port; - port->mcs = conn_stat->message_capability_status; port->ldps = conn_stat->legacy_device_plug_status; port->ddps = conn_stat->displayport_device_plug_status;@@ -2370,8 +2388,8 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb, } new_pdt = port->input ?DP_PEER_DEVICE_NONE : conn_stat- >peer_device_type; - - ret =drm_dp_port_set_pdt (port, new_pdt); + new_mcs = conn_stat->message_capability_status; + ret =drm_dp_port_set_pdt (port, new_pdt, new_mcs);if (ret ==1 ) {drivers/gpu/drm/drm_dp_mst_topology.c +2
-0dowork = true; }else if (ret <0 ) {@@ -3938,6 +3956,8 @@ drm_dp_mst_detect_port(struct drm_connector *connector, switch (port->pdt) {case DP_PEER_DEVICE_NONE :case DP_PEER_DEVICE_MST_BRANCHING : +if (!port->mcs) + ret = connector_status_connected;break ;drivers/gpu/drm/drm_dp_mst_topology.c +1
-1case DP_PEER_DEVICE_SST_SINK :@@ -4572,7 +4592,7 @@ drm_dp_delayed_destroy_port(struct drm_dp_mst_port *port)if (port->connector) port->mgr->cbs->destroy_connector (port->mgr, port->connector); -drm_dp_port_set_pdt (port,DP_PEER_DEVICE_NONE ); +drm_dp_port_set_pdt (port,DP_PEER_DEVICE_NONE , port->mcs);drm_dp_mst_put_port_malloc (port); }
Signature · 7 lines
Cheers, Lyude Paul _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel