cpu/SMT fix

index a59cc980adad..4dc279ed3b2d 100644
@@ -1909,6 +1909,78 @@ void __cpuhp_remove_state(enum cpuhp_state state, bool invoke)
 }
 EXPORT_SYMBOL(__cpuhp_remove_state);
 
+#ifdef CONFIG_HOTPLUG_SMT
+static void cpuhp_offline_cpu_device(unsigned int cpu)
+{
+	struct device *dev = get_cpu_device(cpu);
+
+	dev->offline = true;
+	/* Tell user space about the state change */
+	kobject_uevent(&dev->kobj, KOBJ_OFFLINE);
+}
+
+static void cpuhp_online_cpu_device(unsigned int cpu)
+{
+	struct device *dev = get_cpu_device(cpu);
+
+	dev->offline = false;
+	/* Tell user space about the state change */
+	kobject_uevent(&dev->kobj, KOBJ_ONLINE);
+}
+
+int cpuhp_smt_disable(enum cpuhp_smt_control ctrlval)
+{
+	int cpu, ret = 0;
+
+	cpu_maps_update_begin();
+	for_each_online_cpu(cpu) {
+		if (topology_is_primary_thread(cpu))
+			continue;
+		ret = cpu_down_maps_locked(cpu, CPUHP_OFFLINE);
+		if (ret)
+			break;
+		/*
+		 * As this needs to hold the cpu maps lock it's impossible
+		 * to call device_offline() because that ends up calling
+		 * cpu_down() which takes cpu maps lock. cpu maps lock
+		 * needs to be held as this might race against in kernel
+		 * abusers of the hotplug machinery (thermal management).
+		 *
+		 * So nothing would update device:offline state. That would
+		 * leave the sysfs entry stale and prevent onlining after
+		 * smt control has been changed to 'off' again. This is
+		 * called under the sysfs hotplug lock, so it is properly
+		 * serialized against the regular offline usage.
+		 */
+		cpuhp_offline_cpu_device(cpu);
+	}
+	if (!ret)
+		cpu_smt_control = ctrlval;
+	cpu_maps_update_done();
+	return ret;
+}
+
+int cpuhp_smt_enable(void)
+{
+	int cpu, ret = 0;
+
+	cpu_maps_update_begin();
+	cpu_smt_control = CPU_SMT_ENABLED;
+	for_each_present_cpu(cpu) {
+		/* Skip online CPUs and CPUs on offline nodes */
+		if (cpu_online(cpu) || !node_online(cpu_to_node(cpu)))
+			continue;
+		ret = _cpu_up(cpu, 0, CPUHP_ONLINE);
+		if (ret)
+			break;
+		/* See comment in cpuhp_smt_disable() */
+		cpuhp_online_cpu_device(cpu);
+	}
+	cpu_maps_update_done();
+	return ret;
+}
+#endif
+
 #if defined(CONFIG_SYSFS) && defined(CONFIG_HOTPLUG_CPU)
 static ssize_t show_cpuhp_state(struct device *dev,
 				struct device_attribute *attr, char *buf)

@@ -2063,77 +2135,6 @@ static const struct attribute_group cpuhp_cpu_root_attr_group = {
 
 #ifdef CONFIG_HOTPLUG_SMT
 
-static void cpuhp_offline_cpu_device(unsigned int cpu)
-{
-	struct device *dev = get_cpu_device(cpu);
-
-	dev->offline = true;
-	/* Tell user space about the state change */
-	kobject_uevent(&dev->kobj, KOBJ_OFFLINE);
-}
-
-static void cpuhp_online_cpu_device(unsigned int cpu)
-{
-	struct device *dev = get_cpu_device(cpu);
-
-	dev->offline = false;
-	/* Tell user space about the state change */
-	kobject_uevent(&dev->kobj, KOBJ_ONLINE);
-}
-
-int cpuhp_smt_disable(enum cpuhp_smt_control ctrlval)
-{
-	int cpu, ret = 0;
-
-	cpu_maps_update_begin();
-	for_each_online_cpu(cpu) {
-		if (topology_is_primary_thread(cpu))
-			continue;
-		ret = cpu_down_maps_locked(cpu, CPUHP_OFFLINE);
-		if (ret)
-			break;
-		/*
-		 * As this needs to hold the cpu maps lock it's impossible
-		 * to call device_offline() because that ends up calling
-		 * cpu_down() which takes cpu maps lock. cpu maps lock
-		 * needs to be held as this might race against in kernel
-		 * abusers of the hotplug machinery (thermal management).
-		 *
-		 * So nothing would update device:offline state. That would
-		 * leave the sysfs entry stale and prevent onlining after
-		 * smt control has been changed to 'off' again. This is
-		 * called under the sysfs hotplug lock, so it is properly
-		 * serialized against the regular offline usage.
-		 */
-		cpuhp_offline_cpu_device(cpu);
-	}
-	if (!ret)
-		cpu_smt_control = ctrlval;
-	cpu_maps_update_done();
-	return ret;
-}
-
-int cpuhp_smt_enable(void)
-{
-	int cpu, ret = 0;
-
-	cpu_maps_update_begin();
-	cpu_smt_control = CPU_SMT_ENABLED;
-	for_each_present_cpu(cpu) {
-		/* Skip online CPUs and CPUs on offline nodes */
-		if (cpu_online(cpu) || !node_online(cpu_to_node(cpu)))
-			continue;
-		ret = _cpu_up(cpu, 0, CPUHP_ONLINE);
-		if (ret)
-			break;
-		/* See comment in cpuhp_smt_disable() */
-		cpuhp_online_cpu_device(cpu);
-	}
-	cpu_maps_update_done();
-	return ret;
-}
-
-
 static ssize_t
 __store_smt_control(struct device *dev, struct device_attribute *attr,
 		    const char *buf, size_t count)