Skip to contentSkip to conversation

arm: zynq: zybo z7: fix SPL uart init bitrate

PATCH New Luis Araneda 2 participants 2 messages Jan 20, 2020 Arm/Zynq architecture

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm: zynq: zybo z7: fix SPL uart init bitrate

From: Milan Obuch <[email protected]>

The board uses 100 MHz clock for UART bitrate generator, but is configured as 50 MHz on defconfig.

This produces wrong console output.
The first message, "Debug uart enabled" is received as:
"������b"

Fix the issue by configuring the correct clock for the UART baudrate generator

---

This changes were originally sent by Milan Obuch using a diff format. As he didn't know how to properly send git patches to the mailing list, I converted them to a git commit, rephrased the commit message and added the Signed-off-by tags.

Milan Obuch then review and approved the current state of the patch.

Tested on a zybo z7-20 board by me

 configs/zynq_zybo_z7_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
configs/zynq_zybo_z7_defconfig +1 -1
index 7129e2b5f3..f41d6574f7 100644
@@ -5,7 +5,7 @@ CONFIG_SYS_TEXT_BASE=0x4000000
 CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=50000000
+CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y
Signature · 1 line
2.25.0
Applied
#1 lore raw

PATCH 1/1 arm: zynq: zybo z7: fix SPL uart init bitrate

Quoted 34 lines · Luis Araneda

From: Milan Obuch <[email protected]>

The board uses 100 MHz clock for UART bitrate generator, but is configured as 50 MHz on defconfig.

This produces wrong console output.
The first message, "Debug uart enabled" is received as:
"������b"

Fix the issue by configuring the correct clock for the UART baudrate generator

---

This changes were originally sent by Milan Obuch using a diff format. As he didn't know how to properly send git patches to the mailing list, I converted them to a git commit, rephrased the commit message and added the Signed-off-by tags.

Milan Obuch then review and approved the current state of the patch.

Tested on a zybo z7-20 board by me

 configs/zynq_zybo_z7_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
configs/zynq_zybo_z7_defconfig +0 -0
index 7129e2b5f3..f41d6574f7 100644

configs/zynq_zybo_z7_defconfig CONFIG_SYS_TEXT_BASE=0x4000000 · line 11

Quoted 8 lines
configs/zynq_zybo_z7_defconfig +1 -1
@@ -5,7 +5,7 @@ CONFIG_SYS_TEXT_BASE=0x4000000
 CONFIG_SPL_STACK_R_ADDR=0x200000
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xe0001000
-CONFIG_DEBUG_UART_CLOCK=50000000
+CONFIG_DEBUG_UART_CLOCK=100000000
 CONFIG_DEBUG_UART=y
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_SYS_CUSTOM_LDSCRIPT=y

Applied.
M

Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 195 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200120/a8b0ef4b/attachment.sig>